Sungale CD358LD User's Manual
Contents
1. 02 When connecting the power source make sure that your hands are free of molsture Failure to do so could result In electrical shock 04 Do not let the power cord get overly entangled and do not place any heavy objects on the cord Failure to do so could result in electrical shock 06 Disconnect the power supply during inclement weather conditions that In clude thunder and lightning Fallure to do so could result in fire Before Operations Safety Precautions Please read the following guidelines carefully to ensure user safety and avoid malfunction Product Related Precautions 01 Dropping the product or subjecting it to a significant impact can cause critical damage AEG A 1 03 Striking or scratching the LCD screen may cause critical damage 05 Do not subject the product to severe humidity and or heat 02 Spilling water or any other liquid on the product can cause critical damage HHI 0 04 When cleaning the LCD screen turn off the power and wipe it gently with a soft cloth 06 Make sure to power off the unit before disconnecting the power supply Before Operations aa ee Safety Precautions Please read the following guidelines carefully to ensure user safety and avoid malfunction Product Related Precautions Operating this lamp too close to your Do not pull the lamp hard radio may cause interference Make sure the lamp is not placed in a Immediately2. Delete icon 4 Press OK button There will be a tip in the screen Select the Yes icon to confirm the operation Select the No icon to give up the operation Advanced Operations poc M U Settings Enter SETUP menu In the main menu 1 Press the Navigation button to select the Setup icon 2 Press OK to enter into the setting mode Moving to Desired Settings item 1 Press the A or V button to select items 2 Press the p gt button to enter the setting item list 3 Press the A or V buttons to select desired setting items Brightness Brightneas Contraxt gt Contrast TFT Brightwas p gt TFTContrant TFT Saturation p TFT wiurwilgn p Changing Settings After selecting a certain setting item 1 Press the i button to enter the value list 2 Press the or V buttons to select the desired value 3 Press ok to confirm Exit 1 You can press the lt button to back to the previous item 2 Press the EXIT button to back to the main menu Eae f Advanced Operations Settings Setup Menu Photo Setting Interval Time gt Transition Effact P Interval Time In the setup menu 1 Select Setup Menu Photo Setting 2 Select the Interval Time to set the desired time that make the image remains on the screen in slide show mode The interval time can be set to 5 seconds 10 seconds 15 seconds 30seconds 1min 3min Tran
3. pull the plug when there high temperature environment is something abnormal happening Te l a JP hn aU x aereo l a E 7 Do not pull the power cord arbitrarily Pull the plug when the lamp is not in use for an extended period Before Operations Ir J S nn Safety Precautions Please read the following guidelines carefully to ensure user safety and avoid malfunction Product Related Precautions Do not take the unit apart to refit it Make sure cloth and paper not cover in the shade Du not put the lamp on books or Do not use the lamp in watery or uneven place moist environment N Please pull the plug before replace Make sure the lamp is far away the light source and use the right flammable gases light source Before Operations Package Contents For the Improvement of product performance and or quality the basic components may be modified without prior notice The components may differ slightly in appearance with the provided images Digital Photo Frame Desk Lamp User s Manual gt Power Adapter Quick Start Guide USB cable Before Operations Identifying parts The package contents may differ slightly in appearance with the provided images 12 13 1 23456 78 1 OFF ON turn right or left to power on off the lamp and adjust the light 2 POWER press to turn on the digital photo frame 3
4. to the main menu u a Tip You also can take the DPF as a regular storage device select the photos from your computer then paste them In the DPF s Internal memory In this way the photos will be stored without compression If you want to optimize your internal memory you can select the photos then click the Convert Attention Once you format the Internal memory of your DPF the ASSP software will be deleted In this situation you can still use the DPF as a regular storage device and copy paste delete flles after connecting vour DPF to the PC AYP Customer Management Question amp Answer This chapter will attempt to troubleshoot common problems that one may experience with the Multimedia DPF If this guide does not solve your problem do not dismantle the machine yourself Answer What photo formats are supported by the Multimedia Digital Photo Frame What memory cards are compatible with the digital frame Photo JPEG Secure Digital Card SD MultiMedia Card MMC Memory Stick card MS Dose the Multimedia Digital Photo Yes The player has an intemal memory Frame have built in memory Can insert multiple memory cards Yes you can insert one of the MMC MS SD card each time What is the best picture resolution i lution i displayed on the screen The player s best resolution is 320X240 Can rotata a picture on the screen Yes Press the Right or Left button to rotate a picture
5. LI D NW g geprwom 9 Q9 9 amp M Lhohor 9 09 9 9 8 Seog OU J 15 1 990999 Desk Lamp t Digital Photo Frame User Manual eeeeeceeannen eeseceae ove eeevevc0629 9275 eeoeeo0 202 27 For ongoing product improvement this manual is subject to modification without prior notice Contents User Notice This product has met Before Operation electronic emissions standards required Product Introduction It can be used safely Safety Precaution at home Package Contents Identifying Parts Powering On the Desk Lamp Basic Operation C C Connection Photo Music Movie Advanced Operation Edit flies Settings Clock Alam Connect PC Customer Management Question amp Answer Troubleshooting Product Specifications O OOo NGN 10 11 12 13 14 17 22 23 24 25 26 Before Operation Product Introduction The Desk Lamp Digital Photo Frame is a combination of desk lamp and digital photo frame It has been designed to keep your favorite memories at your fingertips and to provide you with soft light With its bright and vivid LCD screen the Digital Photo Frame offers you an alternative to photo printing adding a new level of convenience to your life Main Features Digital photo frame 3 5 bright Hi definition ultra thin digital LCD screen Viewing your images in slide show and step mode Built in memory stores your favorite pictures Inserting a memory card to display photos aud
6. No All color settings are preset at the factory You can only adjust the Can adjust the colors of the picture brightness and contrast of the screen 1 There is only one picture in the frame Why Digital picture Frame does not 2 You are viewing high resolution pictures on the card High resolution pictures can take longer time to display advance to nex picture 3 You are in STEP SHOW display mode 4 The next picture is damaged Use directional keys to choose the image on the right lower corner then press Why Is only 15 pictures displayed LEFT key to see next 15 pictures thumbnail You are viewing high resolution pictures high resolution pictures can take some time to display Why picture display seems slow Make sure the pictures are in JPEG format Make sure you have inserted a card or USB device properly and selected Why Digital Picture Frame doesn t the PHOTO icon in the main menu pepe display any pictures or make sure there are pictures in the internal memory and you have selected the FAVORITE icon in the main menu This is not a quality problem Why picture doesn t cover the The picture that is 4 3 and the resolution higher than 320X240 can entire screen cover the entire screen so please adjust the picture ratio to 4 3 and the resolution to 320X240 or higher How can see the file list Please enter into the setup Menu Photo Setting and set the Browse item to File Manager Can t the product r
7. PHOTO press to display photos direcly 4 MUSIC press to enter the music list and play music directly 5 VIDEO press to enter the movie list directly 6 EXIT press to exit the present menu T lt q skip to the previous icon rotate the picture by left 90 or decrease the volume 8 P skip to the next icon rotate the picture by right 90 or increase the volume 9 A skip to the upper icon previous image 10 skip to the under icon next image 11 0 K Press the button to enter and confirm 12 SD MMC MS Insert the SD MMC MS card 13 USB connect the USB disk or other external devices to the DPF and connect the digital photo frame to the PC Before Operations Powering On the Desk Lamp UB T A RA v I 1 Connect the power adapter to the DC IN jack 2 Plug in the power cord 3 Turn the OFF ON button to power on the lamp press the POWER button to turn on the digital photo frame Basic Operations Connection Memory Card insertion Insert card in the direction indicated by the arrow on the top of the card The side of the memory card on which the sticker is affixed should face to the front Aligning the memory card upside down or to the reverse side may cause damage that is the sole r esponsibility of the user Use SD Memory Stick MMC cards enabled Note 1 MS Duo isn t compatible alone But it can be supported with the help of MS Duo adapter 2 Itis recommend
8. SB together at same time Otherwise one of the devices can not be recognized Customer Management aaas Product Specifications Specifications can be changed without prior notice in the interest of improving product performance Product Specifications Item Details LCD Display Size 3 5 Inch Diagonal 4 3 Matching Image Resolution 320 Horizontal 240 Vertical Memory Internal Memory Compatible Memory Cards SD MMC Memory Stick Support Media Formats Images JPEG ipg Power Adapter Input 100 240V AC Output 12V 1ADC Electricity Consumption 5W Opating USB Connection USB USB 2 0 Note All data are provided for reference purposes only Sungale reserves the right to make all changes without prior notice FCC and Safety Information FCC Part 15 19 This device complies with Part 15 of the FCC Rules Operation is subject to the following two conditions 1 this device may not cause harmful interference and 2 this device must accept any interference received including interference that may cause undesired operation FCC part 15 21 Warning Changes or modifications to this unit not expressly approved by the party responsible for compliance could void the user s authority to operate the equipment FCC part 15 105 Note This equipment has been tested and found to comply with the limits fora Class B digital device pursuant to Part 15 of the FCC Rules These limits are designed to provide reaso
9. connect your DPF to your PC Then press OK button Don t connect your DPF to the PC when play back Note The ASSP is a software in the intemal memory developed by Sungale go manage the picture and audio files to optimize the utilization of the source of tho memory The ASSP is inapplicable to manage ebook and video files Just use the unit as a regular storage device to manage ebook and video files after connecting the unit to the PC Start ASSP On your computer click My computer then click StorageDevice Disk then double click Fileconverter exe you will enter into ASSP interface Tip 1 If your PC has set as auto run you will enter into the ASSP interface directly no operation needed 2 The PC Installed the anti virus software or other hold up software will make the autorun inf invalid In this situation the file is set as hidden file If you want t autorun the ASSP you can set your PC to display hidden filles Use ASSP 1 Click AddFlla your computer s flles and folders will appear double click the file or photo to add them to your DPF 2 Hold on Shift or Ctrl you can download multi files or photos to your DPF E ONEB In this way the photos downloaded will be stored at se a 800X480 to suit your DPF s screen and the MP3 files will be transferred into WMA file When you finish the operation safely remove the USB cable from your PC E Then press EXIT button to retum
10. ead the card Make sure you have Inserted the card or usb disk The ASSP is a sofware in the internal memory to manage the picture and What s the ASSP software audio files to optimize the utilization of the source of the memory It is inapplicable to manage ebook and video files How to put video files into the Just use the unit as a regular storage device copy and paste the files from memory the PC to the intemal memory e Customer Management Troubleshooting If you have any questions please consult the troubleshooting guide below Some simple checks or a minor adjustment on your part may eliminate the problem and quicky resolved No power Could not read the card Could not read the USB portable flash driver Ensure the power button is on Ensure the power cord is not damaged Ensure the power plug is connected firmly to the outlet 1 Please copy the content in your card to your PC then format your card then past your photos music movies in your card again then insert the card to DPF to read it 2 Ensure the card is not damaged 3 Ensure the card is connected to the DPF correctly 4 Ensure the card has photos if no photos in card the screen will display no playable file 5 Do notinsert your card and USB together at same time Otherwise one of the devices can not be recognized 1 This unit is 2 0version USB port make sure your usb device port is 2 0 version 2 Do not insert your card and U
11. ed that a full format be performed before using a memory card for the first time 3 This device will read USB first and will not recognise the memory card if you insert a memory card and extra USB memory together at the same time To remove a memory card Remove a memory card from a slot in the opposite direction from which it was inserted Note The product will display the images stored in the external devices first and will not display the images in the internal memory if you insert an external devices Basic Operations Photo Slide show mode Tip1 press the PHOTO button to display images in slide show mode Tip2 In the main menu use the navigation buttons to select the PHOTO menu press the OK button and select a device then press OK to display images in slide show mode Tip3 In thumbnail mode select a photo and press OK button to begin a slide show Step show mode Tip1 In slide show mode press OK button to change into the step show mode Tip2 in the Setup menu select the Custom Setup Set the Repeat Mode as One Thumbnail mode In the slide show mode press EXIT button to enter into the thumbnail mode Rotate a photo In slide show or step show mode press the left button to rotate the photo by left 90 and press the right button to rotate the photo by right 90 Basic Operations Music Play music Tip1 press the MUSIC button to en
12. io video USB OTG to read various external cards and connect the PC to manage files Digital calendar Analogue clock Alarm function User friendly menu buttons and user interface Brightness adjustable eye sight protection Flexible metal stand for any angle adjustment Built in stereo speakers LED lamp Bright but soft light with 18 LEDs eye sight protection Super energy efficient 5W consumption Super long lifespan of atleast 30 000 operating hours Low heat flicker free light Environmentally friendly no mercury High durability reduce maintenance costs Flexible metal pipe for any angle adjustment Note The numbers of photos to be stored to the onboard memory will vary due to the size of the file being saved Before Operations Safety Precautions Please read the following guidelines carefully to ensure user safety Power Precautions AA WARNING indicates information that if neglected could result in serious injury and or death to the user CAUTION indicates information that if neglected could result injury to the user and or material damage 01 Use only the authorized power supply product Failuretodoso could result In product malfunction 03 Make sure that the power supply is firmly plugged In and not loose Failure to do so could result in electrical shock 05 Do not connect the power supply to an electrical power strip with other various connections Fallure to do so could result In fire
13. nable protection against harmful interference ina residential installation This equipment generates uses and can radiate radio frequency energy and if not installed and used in accordance with the instructions may cause harmful interference will not occur in a particular installation If this equipment does cause harmful interference to radio or television reception which can be determined by turning the equipment off and on the user is encouraged to correct the interference by one or more of the following measures Reorient or relocate the receiving antenna e Increase the separation between the equipment and receiver Connect the equipment into an outlet on circuit different form that to which the receiver is connected Consult the dealer or an experienced radio TV technician for help LIMITED WARRANTY The limited warranty set forth below is given by the manufacturer with respect to Sungale brand DPF players and other consumer electronics products purchased and used in the United States of America The manufacturer warrants this product against defects in material or workmanship as follows LABOR For a period of ninety 90 days from the date of purchase if this Product Is defective the manufacturer will repairor replace the Product at its option at no charge After this ninety 90 days period up to one year a labor charge of US 30 00 will be charged for each service PARTS For a period of one year fromthe date
14. of purchase the manufacturer will supply at no charge new or rebuilt replacement parts in exchange for defective parts After this one year period the manufacturer will charge the new or replacement parts This warranty does not cover 1 customer instruction installation or set up 2 cosmetic damage or damage due to accident misuse abuse or negligence 3 commercial use of the Product 4 modification of any part of the Product 5 damage due to improper operation improper maintenance or connection to an improper voltage supply 6 damage due to an attempted repair of the Product by anyone other than a facility authorized by the manufacturer to service the Product 7 consumables such as fuses and batteries This warranty Is valid only in the United States The product must be accompanied by a copy of the original retail purchase recelpt If no proof of purchase is attached the warranty will not be honored and repair cost will be charged This warranty is valid with attach written documentation detailing the complaint to the outside or inside of the carton This warranty is invalid if the factory applied serial number has been altered or removed from the Product The manufacturer reserves the right to modify any design of this product without prior notice To obtain warranty service you must deliver the product freight prepaid in either its original packaging or packaging affording an equal degree of protection plus proof of
15. ory default Exit In the setup menu 1 Select Setup Menu Custom Setup 2 Select the Exit to finish the setup menu to go back to the main menu Advanced Operations Clock Alarm Clock In the main menu 1 Prass the navigation buttons to select the CLOCK menu 2 Press OK to enter Into the analog clock Interface 3 Press OK agaln to change Into the digital clock interface Note The digital photo frame supports multi alarm function Make sure keep the digital photo frame on after setting an alarm and till the alarm rings Enter into the Alarm menu In the main menu 1 Press the navigation buttons to select the Alarm menu 2 Press OK to enter Into the alarm menu Alarm settings Press the left or right button to move to the desired icon press the up and down button to change parameter velues Tip1 You can set 3 alarms at the same time There are 4 kinds of alarm sound Forest Rooster Water stream Sea gull for your choice It will display different images in different alarm sound background Tip2 When the alarm clock rings it will be ringing for 60s if there isn t any operation In 60s then It will auto stops and rings again after about 5 minutes Exit Select the EXIT icon and press OK or press the EXIT button directly to return to the main menu DB Advanced Operations Connect PC In the main menu select the Connect PC menu 3n SES io E 5 Ta Usa the supplled USB cable to
16. purchase to Service Center 13941 Central Ave Chino CA 91710 Tel 800 473 5156 REPAIR OR REPLACEMENT AS PROVIDED UNDER THIS WARRANTY IS THE EXCLUSIVE REMEDY OF THE CONSUMER THE SERVICE CENTER SHALL NOT BE LIABLE FOR ANY INCIDENTAL OR CONSEQUENTIAL DAMAGES FOR BREACH OF ANY EXPRESS OR IMPLIED WARRANTY ON THIS PRODUCT EXCEPT TO THE EXTENT PROHIBITED BY APPLICABLE LAW ANY IMPLIED WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE ON THIS PRODUCT IS LIMITED IN DURATION TO THE DURATION OF THIS WARRANTY Some states do not allow the exclusion or limitation of incidental or consequential damages or allow limitations on how long an implied warranty lasts so the above limitations or exclusions may not apply to you This warranty gives you specific legal rights and you may have other rights which vary from state to state Digital Photo Frame
17. sition Effect In the setup menu 1 Select Setup Menu Photo Setting 2 Select the Interval Effect to set the desired transfer effect in slide show mode You can directly set the picture transfer effect No Effect Cover up down left right Uncover up down left right Wipe up down left right Push up down left right Blind Vertical Horizontal Block Random Show Type In the setup menu 1 Select Setup Menu Photo Setting 2 Select the Show Type to set the desired photo displaying type D Select Fit Screen to display images fit to screen in slide show mode 2 Select Full Screen to display entire images in slide show mode Advanced Operations Settings Browse 1 Select Setup Menu Photo Setting 2 Select the Browse to set the desired browse mode Set the Browse Thumbnall Flle manager mode to pre view photos In different mode iEn waterlllie P ki Watarlliea2 File manager mode Thumbnail mode Setup Menu Auto Play Photo 1 Select Setup Menu Auto Play 2 Select the Photo to set photo displaying auto or manual Set the photo auto play to ON It will auto display the photos in slide show mode Set the photo auto play to OFF For manual play Advanced Operations Setup Menu Display Setup Brightness P v Nomal Contrast gt Bright TFT Brightness b Soft TFT Contrast b TFT Saturation p gt OR Brightness 1 Select Setup Menu Display Setup 2 Select the Brightness to adju
18. st the displaying brightness Select the Normal Bright Soft to adjust display Contrast 1 Select Setup Menu Display Setup 2 Select the Contrast to adjust the displaying contrast TFT Brightness 1 Select Setup Menu Display Setup 2 Select the TFT Brightness to adjust the TFT brightness TFT Contrast 1 Select Setup Menu Display Setup 2 Select the TFT Contrast to adjust the TFT contrast TFT Saturation 1 Select Setup Menu Display Setup 2 Select the TFT Saturation to adjust the TFT saturation Advanced Operations eer Settings Setup Menu Custom Setup OSD Language In the setup menu 1 Select Setup Menu Custom Setup 2 Select the OSD Language to select different language Repeat mode In the setup menu 1 Select Setup Menu Custom Setup 2 Select the Repeat mode to change the Setup Menu interface color Select One to repeat current track Select Folder to repeat current folder Select All to repeat current memory card disk Select Off to cancel the repeat mode Set date amp time In the setup menu 1 Select Setup Menu Custom Setup 2 Select the Set date amp time to enter the date amp time setting mode 3 Press the Left and right button to select items 4 Press the Up and Down button to adjust the value 5 Select OK to confirm settings and select Cancel to give up the settings Default In the setup menu 1 Select Setup Menu Custom Setup 2 Select the Default to reset the unit to fact
19. ter the music list and play music Tip2 in the main menu 1 Press the navigation buttons to select the MUSIC menu 2 Press OK button and select a device 3 Press OK to enter the music list Select a song 1 Press the A or button to select folder and desired song 2 Press OK to play Adjusting the volume When playing music press the left right button to decrease increase the volume Photo Music In the slide show or step show mode 1 Press the MUSIC button to begin a slide show In music background 2 Press the Music button again to turn off the music Exit In the music file list press Exit button to return to the previous menu Basic Operations SS eee Movie Play movie Tip1 Press the MOVIE button play the movie Tip2 In the main menu 1 Press the navigation buttons to select the MOVIE menu 2 Press OK select a device 3 Press OK again to play the movie Note Press the Exit button to retum to the movie list Adjusting the volume Press the left right button to decrease Increase the volume during movie playback Exit In the movie file list press Exit button to return to the previous menu Advanced Operations Edit files In the main menu 1 Press the navigation buttons to select the Edit menu 2 Press OK button the screen will display as below Photo Music Photo Audio Movie 3 Select desired icon press OK button 4 Press the navigation but
20. tons to activate edit files 5 After highlighting the Edit icon press OK button the screen will display as below Create a new folder 1 Press the navigation buttons to select the Now Folder icon 2 Press OK button you will see the following screen ICONS MEANING Input fleld Back to delete Remove the cursor to laeftright Canfirm and exit Space bar Input solution Give up tha operation Use the soft keyboar to named the new folder a dg M J Y Dh Ki Advanced Operations D Edit files Format Memory Activate the Edit icon press the navigation buttons to select the Format Memory icon to format the memory Copy and paste files In the file list 1 Select the file you want to copy 2 Press OK button to confirm the operation 3 To copy more continue selecting files The confirmed files will ba in a yellow frame 4 Press the navigation buttons to activate the Edit icon the screen will display as below 7 In the file list seloct the desired storage device or folder and then activate the Edit icon The screen will display as below Advanced Operations Edit files 8 Select tha Paste Icon and press OK button to confirm If there is a file in the list under the same name you will see the following screen Delete files 1 Press the navigation buttons to select the Edit Icon 2 Press OK button the screen will display as right below 3 Press the navigation buttons to select the
Download Pdf Manuals
Related Search