Stiga 125 COMBI PRO 8211-0543-01 User's Manual
Contents
1. 2 3 Controls 107 M HD 2 3 1 Cutting height adjustment The cutting height can be adjusted between 30 and 85 mm Electrical cutting height adjustment The setting can be adjusted infinitely variably us ing a switch on the machine Manual cutting height adjustment The setting can be adjusted to a number of fixed positions using the lever See fig 9 2 3 2 Incline forwards The rear section of the cutting deck can be raised 12 mm by moving the two pins down one hole from the basic setting See fig 13 2 3 3 Rear mounting The cutting deck s rear section is secured with the pins in fig 13 2 3 4 Mounting in implement lifter The deck is mounted in the implement lifter with a chain and snap hooks One snap hook is intended for the working position and can be moved in the chain links to set the lift ing force The other snap hook is intended for the washing position 2 4 Controls 107 M 2 4 1 Cutting height adjustment The cutting height can be adjusted between 30 and 85 mm The setting can be adjusted to a number of fixed positions using the lever See fig 9 2 4 2 Incline forwards The cutting deck s rear section can be raised infi nitely variably Each line 12 J corresponds to a raise of 5 mm The setting is locked with the screws 12 K 2 4 3 Rear mounting The cutting deck s rear section is secured with the catches 12 L 2 4 4 Mounting in implement lifter The deck is mounted in the impl2. STIGA PARK 4WD 107 M HD 125 Combi Pro INSTRUCTIONS FOR USE 8211 0543 01 2 125 Combi Pro 5 125 Combi Pro Torx T30 10 mm 10 mm 10 107 13 mm 13 mm 5 mm 21 125 Combi Pro 107 MHD 22 23 24 1 GENERAL This symbol indicates WARNING Seri ous personal injury and or damage to property may result if the instructions are not followed carefully You must read these instructions for use and the machine s safety instructions carefully gt e 1 1 Symbols The following symbols appear on the machine They are there to remind you of the care and atten tion required in use This is what the symbols mean Warning Read the instruction manual and the safety manual before using the machine D E Warning Do not insert your hands or feet under the cover when the machine is in operation Warning Watch out for discarded objects Keep on lookers away Pub Ci Warning Before starting repair work remove the spark plug cable from the spark plug p 1 1 2 References 1 2 1 Figures The figures in these instructions for use are num bered 1 2 3 etc Components shown in the figures are marked A B C ete A reference to component E in figure 5 is written 5 E 1 2 2 Hea
3. Washing position Activate the parking brake Set the implement lifter in transport position Set the lowest cutting height 125 Combi Pro 107 M HD 121 M Disconnect the rear section of the cutting deck by removing pins and any washers See fig 2 7 1 and 13 107 M Lift up the rear section of the cutting deck undo the catches 12 L and lower 5 Grip the front edge of the deck and lift up Hook on the chain so that the deck is pointing diago nally upwards See fig 19 It is absolutely forbidden to start the engine when the deck is in the washing position Reset 125 Combi Pro in accordance with 3 1 1 point 8 Reset 107 M HD in accordance with 3 2 1 point 7 Reset 121 M in accordance with 3 2 1 point 7 Reset 107 M in accordance with 3 3 1 point 7 bubb Re 5 3 Service position 1 Activate the parking brake 2 Set the implement lifter in transport position 3 Ifthe deck has electrical cutting height adjust ment disconnect the cable from the machine See fig 15 4 125 Combi Pro 107 M HD 107 M Set the highest cutting height 121 M Set the cutting height in the centre posi tion 5 125 Combi Pro Remove pins and washers See fig 2 107 M HD Remove pins and washers See fig 13 107 M Lift up the rear section of the cutting deck undo the catches 12 L and lower 121 M Disconnect the rear section of the cut ting deck by removing the pins 7 1 6 Remove the belt cover See
4. d be possible to move the rear section of the cutting deck free ly up and down 4 Suspend the cutting deck in the implement lift er See fig 14 3 3 1 Belt 107 M The cutting deck s rear section should rest on the floor it should not be lifted or secured Install the belt as follows 1 Set the maximum cutting height 2 Remove the belt cover See fig 10 The number in the figure indicates the key width 3 Locate the belt around the machine s belt pulley 16 M 4 Force the belt onto the cutting deck s belt pul ley 5 Grip the belt tensioner s lever with your left hand Pull the lever and apply the tensioner to the outside ofthe belt with your right hand See fig 16 6 Fit the belt cover See fig 10 7 Lift up the cutting deck so that it locks in the catches 12 L 3 4 Tyre pressure Adjust the air pressure in the tyres as follows Front 0 6 bar 9 psi Rear 0 4 bar 6 psi 3 5 Basic setting In order for the cutting deck to cut optimally the correct basic setting is required The deck is in the basic setting when its rear edge is 5 mm above its front edge This means that the deck is inclined forwards Carry out basic setting as described below 3 5 1 Basic setting 125 Combi Pro 107 M HD The deck is in the basic setting when the actions under 3 1 1 and 3 2 1 have been carried out 3 5 2 Basic setting 107 M 121 M See fig 17 and perform basic setting of 107 M and 121 Mas follow
5. dings The headings in these instructions for use are num bered in accordance with the following example 2 3 2 isa subheading to 2 3 and is included un der this heading When referring to headings only the number ofthe heading is normally specified E g See 2 3 2 2 DESCRIPTION 2 1 General The cutting deck is intended for use on Stiga s 4 wheel drive Park machines The cutting deck is supplied in one of the follow ing versions With manual adjustment of cutting height With electrical adjustment of cutting height 2 2 Controls 125 Combi Pro 2 2 1 Cutting height adjustment The cutting height can be adjusted between 25 and 90 mm Electrical cutting height adjustment The setting can be adjusted infinitely variably us ing a switch on the machine Manual cutting height adjustment The setting can be adjusted to a number of fixed positions using the lever See fig 1 2 2 2 Incline forwards The rear section of the cutting deck can be raised 12 mm by moving the two pins down one hole from the basic setting See fig 2 2 2 3 Rear mounting The cutting deck s rear section is secured with the pins in fig 2 2 2 4 Mounting in implement lifter The deck is mounted in the implement lifter with a chain and snap hooks One snap hook is intended for the working position and can be moved in the chain links to set the lift ing force The other snap hook is intended for the washing position
6. ement lifter with a chain and snap hooks One snap hook is intended for the working position and can be moved in the chain links to set the lift ing force The other snap hook is intended for the washing position 2 5 Controls 121 M 2 5 1 Cutting height adjustment The cutting height can be adjusted between 30 and 85 mm Electric cutting height adjustment The setting can be adjusted infinitely variably us ing a switch on the machine Manual cutting height adjustment The setting can be adjusted to a number of fixed positions using the lever 7 G 2 5 2 Incline forwards The cutting deck s rear section can be raised infi nitely variably The setting is locked with the screws 7 H 2 5 3 Rear mounting The cutting deck s rear section is secured with the pins 7 1 2 5 4 Mounting in implement lifter The deck is mounted in the implement lifter with a chain and snap hooks One snap hook is intended for the working position and can be moved in the chain links to set the lift ing force The other snap hook is intended for the washing position 3 ASSEMBLY 3 1 Installing the 125 Combi Pro Place the cutting deck in position in front ofthe machine 2 Install the following components on both wheel axles Washer 3 B Deck mount 3 C Washer 3 B e Circlip 3 A 3 Remove the pins and the washers on both sides See fig 2 4 Screw the arms into each other See fig 4 5 Suspend the cut
7. fig 5 E 8 and 10 The number in the figure indicates the key width 7 Only 125 Combi Pro Remove the belt guide 5 F 8 Grip the belt tensioner s lever with your left hand Pull the lever and unhook the tensioner from the belt with your right hand See fig 16 9 Force the belt off the deck s pulley 10 Grip the front edge of the deck and lift up Lift until the deck is completely vertical and rest the rear edge on the floor See fig 20 Reset 125 Combi Pro in accordance with 3 1 Reset 107 M HD in accordance with 3 2 Reset 107 M in accordance with 3 3 Reset 121 M in accordance with 3 2 5 4 Cleaning The underside of the deck must be cleaned after each use Set the deck in washing position Clean the underside of the deck carefully Use a high pressure washer scraper and or brush When the surfaces are completely dry and clean touch up the paintwork Use durable yellow paint intended for metal outdoors 5 5 Wheels 125 Combi Pro is fitted with two lubricating cups 21 M for the vertical shafts 107 M HD is fitted with two lubricating cups for the vertical shafts 21 M and two lubricating cups 21 N for the wheel axles The grease nipples must be lubricated with univer sal grease after 50 hours of operation 5 6 Replacing blades Wear protective gloves when changing AN blade s to avoid cutting yourself Check that the blades are always sharp This produces the best cutting results Alwa
8. orised Stiga workshop for re pair work to be carried out The blades in the 125 Combi Pro are freely rotat ing 6 SPARE PARTS STIGA genuine spare parts and accessories are de signed specifically for STIGA machines Please note that non genuine spare parts and accessories have not been checked or approved by STIGA The use of such parts and accessories can affect the function and safety of the machine STIGA accepts no responsi bility for damage or injuries caused by such products 7 DESIGN REGISTRATION This product or parts thereof is covered by the fol lowing design registration Sweden 66 166 Germany 499 11 740 9 France 577 251 253 577 439 443 USA 435 564 GGP reserves the right to make alterations to the product without prior notification STIGA www stiga com GGP Sweden AB Box 1006 SE 573 28 TRAN S
9. s 1 Place the machine on a level floor Requirements for floor flatness 1 mm m No slope towards a floor drain or similar may occur in front of or behind the machine 2 The tyres must have the correct air pressure See 3 4 3 Place the deck in transport position and lay a plane parallel plank under the deck 4 Place a 5 mm tall spacer on the plank under the rear edge of the cutting deck and lower the deck to the working position 5 Undo the screws 7 H and 12 K so that the deck rests against the plank and the spacer Check that the deck does not lean sideways in relation to the machine 6 Tighten the screws 7 H and 12 K to 22 Nm 7 Place the deck in transport position and remove the plank 4 USING THE MACHINE Check that the grass that is to be cut is completely free of foreign objects such as stones etc 4 1 Cutting height The best cutting results are achieved when the when the top third of the grass is cut off Le 2 3 of the length of the grass remains See fig 18 If the grass is long and has to be cut significantly cut twice using different cutting heights Do not use the lowest cutting heights if the lawn surface is uneven This would entail a risk of the blades being damaged against the surface and the lawn s top layer of soil being removed 4 2 Incline The cutting deck s rear section can be lifted so that the deck has a greater forward incline than that provided by the basic setting Thi
10. s incline affects the cutting results as follows 4 2 1 No incline When the deck is in the basic setting the best mulching effect and good dispersion of the cut grass are achieved The basic setting is recom mended for normal grass 4 2 2 Incline When the cutting deck is inclined forwards the mulching effect is reduced while the cut grass is dispersed better Inclining forwards is recommended for thicker grass 4 3 Mowing advice In order to achieve optimum mowing results fol low the advice below Cut frequently Run the engine at full throttle The grass should be dry Use sharp blades Keep the underside of the cutting deck clean 4 4 125 Combi Pro 125 Combi Pro can cut the grass in the following two ways e Mulching composting and spreading Rear ejection ejects the grass in a line behind the deck The deck is set for mulching on delivery In order to eject the grass in a line behind the deck the plug in fig 6 must be removed Set the deck in service position see 5 3 in order to remove install the plug 5 MAINTENANCE 5 1 Preparation All service and all maintenance must be carried out on a stationary machine with the engine switched off Prevent the machine from rolling by al ways applying the parking brake Stop the engine Prevent unintentional starting of the AN engine by disconnecting the spark plug cable from the spark plug and remov ing the ignition key 5 2
11. t lift er See fig 14 6 If the deck has electrical cutting height adjust ment connect the cable to the machine s front right socket See fig 15 3 2 1 Belt 107 MHD 121 M The cutting deck s rear section should rest on the floor it should not be lifted or secured Install the belt as follows 1 107 M HD Set the maximum cutting height 121 M Set the cutting height in the centre posi tion 2 Remove the belt cover See fig 8 and 10 The number in the figure indicates the key width 3 Locate the belt around the machine s belt pulley 16 M 4 Force the belt onto the cutting deck s belt pul ley 5 Grip the belt tensioner s lever with your left hand Pull the lever and apply the tensioner to the outside of the belt with your right hand See fig 16 6 Fit the belt cover See fig 8 and 10 7 Lift up and secure the rear section of the cutting deck 107M HD on machines with 17 wheels Install the pins in the third hole from the top See fig 13 107M HD on machines with 16 wheels Install the pins in the fourth hole from the top See fig 13 121 M Lift up and install the pins 7 1 a 3 Installing 107 M Place the cutting deck in position in front of the machine 2 Install the following components on both wheel axles Washer 11 B Deck arm 11 D Washer 11 B e Circlip 11 A 3 Install the deck arms in the cutting deck s front corners After tightening it shoul
12. ting deck in the implement lift er See fig 14 6 Ifthe deck has electrical cutting height adjust ment connect the cable to the machine s front right socket See fig 15 3 1 1 Belt 125 Combi Pro The cutting deck s rear section should rest on the floor it should not be lifted or secured Install the belt as follows 1 Set the maximum cutting height 2 Remove the belt cover 5 E The number in the figure indicates the key width 3 Remove the belt guide 5 F 4 Locate the belt around the machine s belt pulley 16 M Se Aare the belt onto the cutting deck s belt pul ey 6 Grip the belt tensioner s lever with your left hand Pull the lever and apply the tensioner to the outside ofthe belt with your right hand See fig 16 7 Install the belt guide and belt cover See fig 5 8 nae and secure the rear section of the cutting eck On machines with 17 wheels Install the wash ers and the pins in the top hole See fig 2 On machines with 16 wheels Install the wash ers and the pins in the middle hole See fig 2 3 2 Installation of 107 MHD 121 M 1 Place the cutting deck in position in front ofthe machine 2 Install the following components on both wheel axles Washer 3 B Deck mount 3 C Washer 3 B e Circlip 3 A 3 Remove the pins on both sides See fig 7 1 and fig 13 4 Screw the arms into each other See fig 4 5 Suspend the cutting deck in the implemen
13. ys check the blade s after a collision If the blade system has been damaged defective parts should be replaced N Always use genuine spare parts Non genuine spare parts can entail a risk of injury even if they fit the machine The deck is equipped with blades accord ing to the following alternatives Separate blades screwed into place on the blade bars See fig 22 Full blade See fig 23 5 6 1 Separate blades The blades are replaceable When replacing both blades on the same blade bar must be replaced to avoid imbalance Tightening torque Screws 22 P 24 Nm Shear bolts 22 Q 9 8 Nm In the event of a collision the shear bolts 22 Q can break and the blades bend back If this has hap pened install genuine shear bolts and tighten as above 5 6 2 Full blade fig 23 The full blade is replaced when the edges are worn Install the new blade with the punched text facing down Tightening torque 24 Nm 5 7 Synchronising blades The following decks have synchronised blades 107M 107M HD 121M If one of the blades has struck a solid object e g a stone the positive drive belt may mesh incorrect ly endangering the synchronisation This entails a risk of the blades colliding with each other Correctly synchronised blades must be offset 90 from each other See fig 24 Always check synchronisation after a collision If there is any suspicion of incorrect synchronisa tion contact an auth
Download Pdf Manuals
Related Search