Speco Technologies VL647iLT User's Manual
Contents
1. HLC Off Selectable 580TV Lines 52dB AGC Off Weight On 0 00001 Lux Intense Light 256 ATW AWB AWC SET Manual Indoor Outdoor AUTO 1 50sec 1 60sec 1 100 000sec Off Auto Selectable limit 2 256 High Middle Low Off Selectable Off On 0 100 Level Adjustable Indoor Outdoor Off On Off 4 Zone Alarm Output On Off 8 Zone Off Mirror V Rev Rotate On Off 0 31 Level Adjustable Color BW Auto On 32 Off DC 12V 200mA DC Auto Iris Varifocal Lens 2 8mm 12mm 14 122 F RH 9596 Max 4 140 F RH 95 4 33 W 3 23 H 4 33 D 1 54 Ibs FEATURES HIGHT RESOLUTION Horizontal resolution of 580 TV lines is achieved by using a SONY Super HAD CCD with 410 000 pixels and a custom DSP yielding images with a high S N ratio Day Night The camera can be configured to either display color images in all lighting conditions or be set automatically switch to B W in low light conditions INTENSE LIGHT 1 3 inch high density CCD and Digital Signal Processor permit high quality image to be captured in very low light conditions S WDR Speco Wide Dynamic Range Enables the camera to obtain clear and high quality images even in strong backlight conditions S DNR Speco Dynamic Noise Reduction Removes image noise efficiently to display sharp images in low light conditions SLC Speco Light Compensation Enables the camera to obtain a clear image when the2. RANGE 0 100 Level Adjustable RED RED RANGE 0 100 Level Adjustable RETURN RETURN FACTORY RETURN Save the SETUP Menu and exit Special Menu ON OFF FREEZE MIRROR D ZOOM GAMMA NEG IMAGE RETURN AREA SELECT AREA 1 4 AREA DISPLAY ON OFF LEFT RIGHT 0 100 Level Adjustable WIDTH 0 100 Level Adjustable TOP BOTTOM 0 100 Level Adjustable HEIGHT 0 100 Level Adjustable SENSITIVITY 0 40 Level Adjustable MOTION VIEW ON OFF RETURN AREA SELECT AREA 1 8 AREA DISPLAY ON OFF LEFT RIGHT 0 100 Level Adjustable WIDTH 0 100 Level Adjustable TOP BOTTOM 0 100 Level Adjustable HEIGHT 0 100 Level Adjustable COLOR Selectable in 15 Color RETURN 10 Menu Set Up Menu items can be selected by using the OSD buttons of the camera 1 Press the Set Up button The Set Up menu will be displayed on the monitor ALENS EXPOSURE WHITE BAL DAY NIGHT S DNR SPECIAL ADJUST RESET EXIT 2 Move and select the required function using the Up and Down button Move the arrow indicator Up or Down to select the desired feature by pressing the Up or Down button SETUP ALENS Ra EXPOSURE WHITE BAL DAY NIGHT S DNR SPECIAL ADJUST RESET EXIT ATW COLOR ON 4 2 11 3 Changing menu settings using the Left or Right button Available values or Status are displayed by pressing the Left or Rig
3. PRICING POLICY This price sheet reflects current published price All prices are subject to change without notice All items will be billed at current prices CREDIT Companies that have not established credit with our company should allow a sufficient period of time for credit approval Please be sure to provide complete credit information bank and trade references plus financial statements if available with your first order To expedite first shipment a certified or bank check with the order or use of Visa MasterCard Amex will avoid delays while we are checking credit and waiting for bank clearance FREIGHT POLICY All shipments are F O B our New York warehouse All orders totaling 2000 or more will be shipped freight allowed to any point in zones 1 2 3 4 5 and 1 2 freight allowed in zones 6 7 8 providing invoice is paid within 30 days from receipt of merchandise catalogs or exceptions from regular pricing All UPS and USPS shipments will be insured with insurance fee plus shipping and handling charges added to the invoice MINIMUM OPENING ORDER 1500 We reserve the right to refuse reorders under 250 PLEASE REQUEST CONFIRMATION OF ALL FAXED PURCHASE ORDERS WARRANTY We warranty all products to be free from any manufacturing or material defects Cameras 5 Years This warranty will not extend to any products which have been subjected to misuse Monitors amp IR LEDs 1 Year neglect accident or improper installation used in viol
4. harmful interference to radio communications Operation of this equipment in a residential area is likely to cause harmful interference in which case the user will be required to correct the interference at his own expense WARNING Changes or modifications not expressly approved by the manufacturer could void the user s authority to operate the equipment CAUTION To prevent electric shock and risk of fire hazards Do NOT use power sources other than those specified Do NOT expose this appliance to rain or moisture This installation should be made by a qualified service person and should conform to all local codes Contents Contents Precautions Sefety Instructions SPECIFICATIONS FEATURES FEATURES Menu Set Up Menu Set Up Lens Set Up Exposure Back Light S WDR White Bal Day amp Night gt S DNR Special Camera Title D Effect Motion Privacy e Return Adjust gt Reset gt Exit Trouble Shooting Precautions Only use the camera under conditions Severe lighting change or flicker can This is one of the most important parts of the where temperatures are between cause the camera to work improperly camera Be careful not to leave 10 and 50 C Be especially careful to provide fingerprints on the lens cover ventilation when operating under high temperatures It can cause malfunctions to occur Severe lighting change or flicker can If exposed to r
5. WHITE BAL DAY NIGHT 2 Select whether or not to activate S DNR by using the Left and Right buttons ON Activates S DNR Digial noise reduction can be adjusted between 0 100 OFF Deactivates S DNR noise is not reduced S DNR p LEVEL RETURN Select RETURN by using the Up or Down button to return to Set Up menu 21 Special 1 When the SETUP menu screen is displayed select SPECIAL using the Up and Down buttons SETUP LENS DC EXPOSURE 4 WHITE BAL ATW DAY NIGHT COLOR S DNR ON H A SPECIAL gt ADJUST a RESET H EXIT 2 Select one of the mode using the Up and Down button SPECIAL 91 CAM TITLE OFF OFF 2 D EFFECT 3 MOTION OFF OFF 4 PRIVACY OFF OFF 5 RETURN 1 CAM TITLE When input the Camera ID is displayed on the monitor 1 1 Move the arrow indicator to CAMERA ID using the Up or Down button on the SETUP menu screen 1 2 Set to ON using the Left or Right button 22 1 3 Press the SETUP button CAMERA TITLE 0123456789 ABCDEFGHIJKLM NOPQRSTUVWXYZ Dee ce pop CS CLR POS END 1 4 The CAMERA TITLE can be up to 15 alphanumeric characters in length CD Move the cursor to choose an alphanumeric character CAMERA TITLE 0123456789 ABCDEFGHIJKLM NOPQRSTUVWXYZ gece Ben CE suf m om CLR POS END 2 Choose a character in displayed range A Z a z 0 9 using the Up Down Left and Right buttons 3 Select the des
6. higher gain increases brightness but also increases any noise OFF Deactivates the AGC function LOW Allows automatic gain control to LOW MIDDLE Allows automatic gain control to MIDDLE HIGH Allows automatic gain control to HIGH INTENSE LT At night and or in dark conditions the INTENSE LT mode can be selected desired value from x2 x256 Select FLK mode when flickering occurs caused by the unmatched frequency of electric lights INTENSE LT p gt INTENSE LT RETURN 14 RETURN Select Return to save the changes in the EXPOSURE menu and retun to the SETUP menu NOTE Back Light SLC This camera provides intelligent light level control to overcome even strong backlight conditions 1 Move the arrow indicator to BACKLIGHT using the Up or Down button on the SETUP menu screen 2 Select the desired level by using the Left or Right button EXPOSURE SHUTTER BRIGHTNESS AGC INTENSE LT SLC S WDR 1 RETURN OFF SLC function does not operate SLC Users can select and define a specific area in a scene and view the area clearly HLC When there are simultaneous brightness amp dark image areas HLC makes both distinct 15 SLC ON SLC OFF 3 Select a mode using the Left and Right buttons then press the SET button Select SLC to adjust the desired SLC area and GAIN level GAIN Adjust the SLC sensitivity by selecting LOW MIDDLE or HIGH DEFAULT Press the D
7. the arrow indicator to RETURN after complete the setup to return to SPECIAL menu 4 PRIVACY Hide an area you want to hide on the screen 4 1 When the SPECIAL menu screen is displayed press the Up and Down buttons to set to PRIVACY SPECIAL 1 CAM TITLE OFF ON 2 D EFFECT 3 MOTION OFF OFF 44 PRIVACY OFF ON Rz 5 RETURN 4 2 Set up area mode using the 4 direction buttons CD AREA SELECT You can select up to 8 MD area PRIVACY AREA SELECT AREA DISPLAY gt WIDTH HEIGHT COLOR RETURN 2 AREA DISPLAY OFF Disabled ON Activates area display 28 3 Move arrow indicator to WIDTH to make desired width of cells to increase or decrease by using the Left Right button between the level 0 100 4 Move the arrow indicator to HEIGHT to make desired height of cells to increase or decrease by using the Left Right button between the level 0 100 5 Move the arrow indicator to the LEFT RIGHT and TOP BOTTOM to select the desired area positon by using the LEFT or RIGHT button 6 Move the arrow indicator to COLOR to select the desired color of each area cells by using the Left Right button between the 15 different color RETURN Move the arrow indicator to RETURN after complete the setup to return to SPECIAL menu 5 RETURN Move the arrow indicator to RETURN after complete the setup to return to SETUP menu ADJUST 1 When the SETUP menu scr
8. 75Q Hi z t Check the camera is correctly connected to an appropriate and the surface of the camera is hot regulated power source Motion Detection t Has MOTION DET been set to ON the menu is not activated t Has MD AREA been properly defined The color of the t Check the settings in WHITE BALANCE menu picture is not correct The image on the t Make sure that the camera isn t facing direct sunlight or screen flickers fluorescent lighting If necessary change the camera position The INTENSE LT does gt Check that the AGC setting in the EXPOSURE menu is t set to OFF not work t Check the EXPOSURE menu and make sure SHUTTER is set to 31 speco technologies PRODUCT WARRANTIES AND INFORMATION EFFECTIVE JULY 8 2008 POLICY TERMS AND CONDITIONS OF SALE This statement of policy is in lieu of any other policy expressed or implied and no representative or person is authorized to assume for us any other liability or policy without our written consent We cannot be held responsible for typographical errors TERMS OF PAYMENT 2 10 days net 30 from invoice date of merchandise for qualified accounts or Visa MasterCard Amex net at time of order placement only other payment discounts do not apply 300 credit card minimum We reserve the right to charge 1 1 2 interest per month on past due balances New orders will not be shipped while there is a past due balance We will also ship net C O D or C I A
9. INSTRUCTION MANUAL Intense Light Color Dome Camera VL647iLT speco technologies Speco Technologies is constantly developing product improvements We reserve the right to modify product design and specifications without notice and without incurring any obligation Rev 6 9 10 CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN CAUTION TO REDUCE THE RISK OF ELECTRIC SHOCK DO NOT REMOVE COVER OR BACK NO USER SERVICEABLE PARTS INSIDE REFER SERVICING TO QUALIFIED SERVICE PERSONNEL 15014001 FC The lightning flash with arrowhead symbol within an equilateral triangle is intended to alert the user to the presence of uninsulated dangerous voltage within the product s enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons The exclamation point within an equilateral triangle is intended to alert the user to the presence of important operating and maintenance servicing instructions in the literature accompanying the appliance INFORMATION This equipment has been tested and found to comply with limits for a Class A digital device pursuant to part 15 of the FCC Rules amp CE Rules These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial environment This equipment generates uses and can radiate radio frequency energy and if not installed and used in accordance with the instruction manual may cause
10. adioactivity the CCD cause the camera to work improperly will fail Sefety Instructions Precautions for use Q This camera should be installed by qualified personnel only Q There are no user serviceable parts inside Q Do not disassemble this camera other than to make initial adjustments Use a UL approved regulated 24 volt AC or 12 volt DC power supply Use appropriate low voltage power cable to prevent fire or electrical shock Q Please insure that your installation area can support the weight of the camera Please handle this camera carefully Q Do not use a strong or abrasive detergent when cleaning the camera Q Do not install near cooling or heating device Intense Light Color Dome Camera DC Auto Iris Varifocal Lens 2 8mm 12mm SPECIFICATIONS MODEL Sensor Total Pixels Effective Pixels Scanning System Synchronization USD Backlight Resolution S N Y signal Min Illumination White Balance Electronic Shutter Speed INTENSE LT Gain Control S DNR S WDR Motion Detection Privacy Mirror Freeze Sharpness D amp N Selection Digital Zoom Power Power Consumption Lens Operating Temperature Humidity Storage Temperature Humidity Dimension Weight VL647iLT 580TV Lines DC Auto Iris Varifocal Lens 2 8mm 12mm VL647iLT 1 3 Sony Super HAD II CCD NTSC 811 H 508 V PAL 795 H 595 V NTSC 768 H 494 V PAL 752 H 582 V 2 1 Interlace Internal Available SLC
11. ation of instructions furnished by us or to units which have been repaired or altered outside of the factory This limited DVRs EZVR Series VDRs 3 Years warranty does not apply to broken cases batteries or other physically damaged parts PCPro PCL Series DVRs Upon request by the customer the company will at the customer s expense repackage merchandise in new cartons replace missing accessories and return in resalable Indoor Speakers Lifetime condition Unless requested the company will replace and return all merchandise in the Outdoor Weatherproof Speakers 5 Years packaging in which it was received This warranty is in lieu of all expressed warranties Amplifiers 5 Years expressed or implied and of all obligations or liability on our part and we neither assume nor authorize any representative or other person to assume for us any PA Horns Microphones obligation or liability In no event shall we be liable for incidental or consequential Volume Controls damages arising from the use of the product or for any delay in the use of this product M h do to causes beyond our control Some states do not allow limitations of how long an egapnenes implied warranty lasts and or do not allow the exclusion or limitation of consequential Speaker Distribution Centers damages The above limitations on implied warranty and consequential damages may and Speaker Selectors not apply to you This warranty gives you specific legal rights You may ha
12. background image has strong lighting FEATURES HLC High Light Compensation This function reverses bright spots in the picture such as headlights It enables the entire system to do a better job of resolving and displaying grayscale information such as license plate FREEZE This function freezes the current scene for detailed viewing PRIVACY It also has the ability to mask up to 8 areas of the picture where viewing is not desired Each zone can be independently programmed via the OSD OSD All camera functions are menu driven for easy use MIRROR Picture can be reversed vertically or horizontally D ZOOM Digital Zooming up to X32 Menu Set Up DN DC LEVEL 0 100 Adjustable SHUTTER FLK 1 60 1 250 1 500 1 2000 1 5000 1 10000 1 100000 AGC OFF LOW MIDDLE HIGH INTENSE LT x2 x256 Level Selectable SLC OFF SLC GAIN LOW MIDDLE HIGH DEFAULT LEFT RIGHT WIDTH TOP BOTTOM HEIGHT RTURN HLC LEVEL RANGE 0 8 Selectable DEFAULT LEFT RIGHT WIDTH TOP BOTTOM HEIGHT RETURN RETURN S WDR OFF INDOOR OUTDOOR RETURN ATW AWB MANUAL R Gain 0 100 Level Selectable B Gain 0 100 Level Selectable AWC SET INDOOR OUTDOOR B W BURST RETURN COLOR AUTO DELAY 0 63 S LEVEL 0 100 E LEVEL 0 100 RETURN ON RANGE 0 100 Level Selectable OFF Refer to the next page SHARPNESS BLUE SHARPNESS RANGE 0 31 Level Adjustable BLUE
13. e Balance Set White Balance first using ATW or AWC then change to MANUAL and press SETUP button Increase or decrease the value of R Gain Red and B Gain Blue while monitoring the color of the image WHITE BAL MANUAL BLUE 19 Day Night Picture can be displayed in either color or black and white 1 Select DAY NIGHT using the Up or Down button on the SETUP menu screen SETUP LENS EXPOSURE T WHITE BAL ATW ADAY I NIGHT COLOR S DNR ON 4 SPECIAL ADJUST RESET EXIT 2 Select the desired mode using the Left and Right buttons COLOR The picture is always displayed in color BW The White Balance is automatically adjusted in a specific environment AUTO The mode is automatically switches to color in normal conditions and switches to B W mode when ambient illumination is low To set the switching time or speed in AUTO mode press the SET button DAY NIGHT AUTO S LEVEL E LEVEL RETURN 20 3 Select the desired mode and set the values by using the Left or Right button DELAY The range can be adjusted between 0 63 S LEVEL The start level can be adjusted between 0 100 E LEVEL The end level can be adjusted between 0 100 S DNR S DNR is used to reduce the level of background noise in a low luminance environment 1 Move the arrow indicator to S DNR by using the Up and Down button LENS EXPOSURE
14. een is displayed select ADJUST using the Up and Down buttons SETUP LENS EXPOSURE WHITE BAL ATW DAY NIGHT COLOR S DNR ON SPECIAL Md DJUST RESET a EXIT 29 2 Select the desired mode by using Up or Down button ADJUST p gt SHARPNESS BLUE RED RETURN SHARPNESS Improving image clarity The level can be adjusted to obtain an improved image However when the level is set too high it can distort the image or cause noise Select BLUE or RED to increase or decrease the value of R Gain RED and B Gain BLUE while monitoring the color of the image RETURN Move the arrow indicator to RETURN after complete the setup to return to SETUP menu RESET Resets the camera settings to the factory defaults EXIT Press the SET button in the EXIT menu to save the current settings and exit the SETUP menu 30 Trouble Shooting PROBLEM POSSIBLE CAUSE Northing appears on t Check the power cable power supply output and video the screen connection between the camera and monitor Are the camera lens or the lens glass dirty Clean the lens glass with a soft clean cloth The image on the Adjust the monitor controls as required screen is dim i f the camera is facing a very strong light change the camera position t Adjust the lens focus The image on the t Adjust the contrast control of the monitor screen is dark i f there is an intermediate device correctly set the
15. efault to back to the factory default when input the wrong data CD Move the arrow indicator to select the WIDTH of cells to increase or decrease by using the Left Right button from 0 7 cells 2 Move the arrow indicator to select the HEIGHT of cells to increase or decrease by using the Left Right button from 0 7 cells 3 Move the arrow indicator to the LEFT RIGHT and TOP BOTTOM to select the desired area positon by using the LEFT or RIGHT button 16 Move arrow indicator to RETURN and press the Set Up button after complete the SLC area set to return to EXPOSURE menu 4 Select HLC by using the Left and Right buttons then press the Set Up button to set up the desired HLC area and GAIN level 623i 9194 HLC OFF HLC ON LEVEL Adjust the HLC sensitivity by selecting between 0 8 DEFAULT Press the Default to return to the factory default when input the wrong data CD Move the arrow indicator to select the WIDTH of cells to increase or decrease by using the Left Right button from 0 7 cells 2 Move the arrow indicator to select the HEIGHT of cells to increase or decrease by using the Left Right button from 0 7 cells 3 Move the arrow indicator to the LEFT RIGHT and TOP BOTTOM to select the desired area positon by using the LEFT or RIGHT button 17 S WDR This camera provides intelligent light level control to overcome even strong backlight conditions 1 Move
16. ht buttons Press the button until desired value status is displayed 4 After completing the setting move the arrow indicator to EXIT and press the SET button to EXIT Lens 1 Move the arrow indicator to LENS using the Up and Down buttons on the Set Up menu screen 2 Select the desired lens type by pressing the Left or Right button ALENS EXPOSURE WHITE BAL DAY NIGHT S DNR SPECIAL ADJUST RESET EXIT DC DC Auto Iris Lens 12 3 Press the RETURN to return to the SETUP menu Exposure This function is used to select Automatic or Manual shutter speed control 1 On the Set Up menu screen select EXPOSURE by using the Up or Down button 2 Select the desired shutter mode by pressing the Left or Right button SETUP LENS DC 4 4 WHITE BAL ATW DAY NIGHT COLOR S DNR ON SPECIAL ADJUST RESET EXIT FLK Select FLK mode when flickering occurs caused by the unmatched frequency of electric lights 13 EXPOSURE gt SHUTTER BRIGHTNESS INTENSE LT SLC S WDR RETURN 44 NOTE To produce better results with FLK do not use it in conjunction with the S WDR mode in the BACKLIGHT menu Desired shutter speed can be selected by user 1 60 1 250 1 500 1 2000 1 5000 1 0000 1 100000 FLK Brightness just can operate when selected the Manual mode Option When selected DC mode brightness will be disabled AGC AUTO GAIN CONTROL A
17. ired character by pressing the SETUP button The cursor moves to the next position after character input by pressing the SETUP button 4 Repeat the above steps until the Camera ID has been created 2 25 NOTE In cases where the wrong Camera ID has been input Move the cursor to CLR and press SETUP button to erase characters from left to right and repeat the above steps to input the characters again 1 5 To select the position where the Camera ID should be displayed on the screen CD Move the cursor to POS and press the SET button CAMERATITLE 0123456789 ABCDEFGHIJKLM NOPQRSTUVWXYZ Doe e pop Coe _ amp CLR POS END 2 Created camera ID is displayed Factory default position 24 8 Select a new position by using the four directional button Press the SET button to confirm the position 2 D EFFECT Move the cursor to D EFFECT and press the SET button to set the other image functions SPECIAL 1 TITLE OFF OFF 42 D EFFECT 3 MOTION OFF OFF 4 PRIVACY OFF OFF 5 RETURN 2 1 FREEZE Image freezing or moving Image D EFFECT Hd FREEZE 2 MIRROR V FLIP 3 D ZOOM OFF 4 GAMMA 0 45 5 RETURN 4 25 2 2 MIRROR Flip the image horizontally on the screen D EFFECT 1 FREEZE OFF 42 MIRROR V FLIP 3 D ZOOM OFF 4 GAMMA 0 45 5 RETURN 4 V FLIP Flip the image vertically on the screen ROTATE F
18. lip the horizontal image vertically on the screen OFF Disabled MIRROR ON MIRROR OFF 2 3 D ZOOM Digital zoom available range x1 x32 PAN The pan range can be controlled between 100 100 TILT The tilt range can be controlled between 100 100 0 200 PAN d 20 HT Sage ae Eos RETURN 4 26 2 4 GAMMA Desired gamma values be adjusted between 0 05 1 00 2 5 RETURN Move the arrow indicator to RETURN after complete the setup to return to SPECIAL menu 3 MOTION MOTION AREA SELECT AREA AREA DISPLAY 1 _ 100 WIDTH TOP BOTTOM HEIGHT SENSITIVITY MOTION VIEW RETURN 3 1 When the special menu screen is displayed use the Up or Down botton to access the MOTION menu D AREA SELECT Determines whether the MD area selected AREA 1 2 3 4 2 the arrow indicator to select the HEIGHT of cells to increase or decrease by using the Left Right button between the level 0 100 3 Move the arrow indicator to the LEFT RIGHT and TOP BOTTOM to select the desired area positon by using the LEFT or RIGHT button Move the arrow indicator to select the WIDTH of cells to increase or decrease by using the Left Right button between the level 0 100 27 5 Move arrow indicator to select the SENSITIVITY to increase or decrease by using the Left Right button between the level 0 40 amp RETURN Move
19. mation contact us at Speco Technologies 200 New Highway P O Box 726 Amityville N Y 11701 0726 Tel 631 957 8700 Outside Metro N Y 1 800 645 5516 Fax 631 957 9142 or 631 957 3880 Web www specotech com 32 33 34 35 speco technologies 200 New Highway Amityville NY 11701 631 957 8700 1 800 645 5516 www specotech com
20. s issued current best quantity price or price when purchased whichever is lower will prevail BACK ORDERS Products not immediately available for shipment will be back ordered and shipped as soon as available unless we are advised to cancel back orders The original order will determine basis of shipment If the original order is freight allowed back orders will be freight allowed If the original order does not qualify for freight allowance back orders will be shipped freight collect or shipping and handling charges added to the invoice PROMOTIONAL MATERIAL Requests for nominal amounts of catalogs brochures promotional sheets etc will be supplied at no charge Requests for bulk quantities of promotional materials will be billed on a cooperative 50 50 basis CLAIMS Claims for shortage must be presented within thirty days of date of invoice Freight damage claims and freight shortages should be filed directly with the carrier within seven days of receipt of shipment No liability will be accepted for damages directly or indirectly caused from the use of our products or from any other cause Our liability shall be limited to the repair and or replacement of our products at our option of found to be defective RON NOTE All units priced and packaged individually unless specified Not responsible for printer errors We now accept Visa MasterCard AMEX at time of order placement See terms of Payment amp Credit Terms For more infor
21. the arrow indicator to S WDR using the Up or Down button on the EXPOSURE menu screen 2 Select the desired feature by using the Left or Right button EXPOSURE SHUTTER BRIGHTNESS AGC INTENSE LT SLC gt RETURN S WDR When there are simultaneous brightness amp dark image areas S WDR makes both distinct and can be selected desired feature between OUTDOOR and INDOOR OFF S WDR function does not operate RETURN Select Return to save the changes in the EXPOSURE menu and retun to the SETUP menu 18 White Balance The White Balance function is used to control the on screen color 1 Move the arrow indicator to WHITE BAL on the SETUP menu screen using the Up and Down button 2 Select the desired mode by using the Left or Right button SETUP LENS DC 4 EXPOSURE BAL ATW DAY NIGHT COLOR S DNR ON SPECIAL ADJUST RESET EXIT There are three user selectable White Balance settings available ATW Auto Tracking White Balance Normal setting when the color temperature range is from 1 800 K to 10 500 K Ex a fluorescent lamp or outdoors AWB The White Balance is automatically adjusted in a specific environment AWC SET To obtain the best results press the SET button while the camera is focused onto white paper If the environment and or light source changes the White Balance will require re adjustment MANUAL Used for fine adjustment of Whit
22. ve other rights which vary from state to state See actual warranty statement included with Electrical Equipment Listed product for limitations and exclusions where applicable This limited warranty extends to Above amp Balance of Line products listed in the company s current price schedule RETURNS A written return authorization must be obtained prior to shipment Label s must appear on all packages and return must be ship prepaid Defective in warranty products will be returned prepaid Defective out of warranty products will be repaired at a nominal charge for parts and labor and returned with shipping charges added to the invoice If you require an estimate before repair please request RETURNED GOODS POLICY RETURNS SENT WITHOUT PRIOR APPROVAL WILL NOT BE ACCEPTED CREDIT WILL BE ISSUED UPON INSPECTION OF RETURNED UNITS No discounted item may be returned for credit or exchange An order of 3 00 for every 1 00 to be returned must accompany a request for return for stock adjustment There will be minimum charge of 1596 for handling and repacking where necessary Merchandise returned for credit or exchange with missing or damaged packaging or accessories will be charged accordingly Merchandise returned for repair will be shipped back repaired but in the same physical condition as when received by us If repacking or refurbishing is requested where possible you will be charged accordingly 5 crediti
Download Pdf Manuals
Related Search