Sony MVC-CD200 Instruction Guide
Contents
1. computer with the USB cable you can do the following operations e You can send images shot with the camera to your computer and play them back on your computer The finalization is not required e You can directly read and write images shot with the camera on a CD R RW equipped computer without executing the finalization Recommended Windows environment for DirectCD e MMX Pentium 166 MHz or faster When using DirectCD with the camera MMX Pentium 200 MHz or faster 32 MB or more of RAM 45 MB or more of free hard disk space e Monitor with 800x600 resolution and 256 color e Microsoft Internet Explorer 4 01 or later e OS Microsoft Windows 95 Windows 98 Windows 98SE Windows Me Windows 2000 Professional Recommend Windows environment for USB connection with the camera e OS Microsoft Windows 98 Windows 98SE Windows Me Windows 2000 Professional The above OS is required to be installed at the factory Operation is not assured in an environment upgraded to the operating systems described above e CPU MMX Pentium 200 MHz or faster The USB connector must be provided as standard Notes on using DirectCD When using a CD R The supplied writing software DirectCD v3 01c_S55 is required to connect the camera and a computer using the USB connector If any other CD R RW writing software has been installed on your computer check the chart below Any writing software has been installed on your computer Yes The2. disc The selected files will be deleted 14 Printed on recycled paper Printed using vegetable oil ink with less than 1 VOC Volatile Organic Compound retpuiwwrwwort sonycom MND AIT I Sony Corporation Printed in Japan 30679529 1
3. Install Click here Lagu a If the window above is not displayed start up SETUP EXE in the CD ROM Select the language Click DirectCD The Welcome window appears on the screen Welcome El Welcome to the DirectCD Setup program This Pa Poe Dros wal aciiericeea It is strongly recommended that you exit all Windows programs before running this Setup program Click Cancel to quit Setup and then close any programs you have running Click Next to continue with the Setup program WARNING This program is protected by copyright law and international treaties Unauthorized reproduction or distbution of this program or any portion of it may result in severe civil and criminal penalties and will be prosecuted to the maximum extent possible under law Click Next vel the text on the window carefully and if you accept it click es Check the folder in which DirectCD will be installed When you install DirectCD into another folder other than the default one click Browse and select the folder Click Next The setup of the program starts When the installation is complete the screen returns to the window displayed in step 0009 Click Exit The Setup Complete window appears on the screen DirectCD will be available after you restart your computer Check the option Yes then click Finish Note on Easy CD
4. as far as it will go Computer 10 Turn on the camera and your computer DirectCD Disc Ready appears on the screen If this screen does not appear double click the CD icon on the Windows taskbar in the lower corner of your screen DirectCD Disc Ready The disc is ready for read write access directly through drive D You may start reading and writing the disc using Windows Explorer or any lother Windows application such as Microsoft Word Please Note The CD R CD RW drive tray has been locked to prevent laccidental lass of data while under DirectCD control Please use the IDirectCD Wizard to eject the disc when you have finished using it Display this notification again when a DirectCD disc is ready for read and write Click OK Writing data to a disc Once your disc is formatted as a DirectCD disc you can write data to it in several different ways To drag and drop files from Windows Explorer onto the disc drive icon e To select Save As from the File menu of a Windows application and select the drive letter of the camera To use the Send To command To use MS DOS command prompts from a DOS window in Windows Notes If the file name format of images does not correspond to the following format Dsco QOOL JPG you cannot play them back on the camera For details refer to the operating instructions of the camera e Depending on the file type the file may not be
5. Creator You cannot use Easy CD Creator with the camera connected to your computer with the USB cable Using DirectCD You have to install the USB driver into your computer to connect the camera to your computer with the USB cable Do not connect your camera to your computer before installing the USB driver For details on the installation of the USB driver and on the directory refer to the operating instructions of the camera Note When you write new data onto the disc before removing the disc from the camera be sure to follow the procedure for removing the disc page 12 If you remove the disc or disconnect the USB cable without following the procedure data on the disc may be broken Starting DirectCD Do not initialize discs using DirectCD this means that selecting Format from the DirectCD screen Be sure to initialize discs using your camera Initialization described in the operating instructions of the camera or selecting Format on the DirectCD screen is required for using a disc however these do not have compatibility each other And format described in the operating instructions of the camera is to erase all the files in the CD RW and this is different from Format on the DirectCD screen After starting up your computer insert a disc into the camera and connect to your computer with the USB cable e 9 USB cable Push the connector
6. SONY DirectCD Software Operating Instructions MVC CD200 CD300 2001 Sony Corporation 3 067 952 91 1 Notice for users Program Copyright 1999 Adaptec Inc All rights reserved Documentation 2001 Sony Corporation All rights reserved This manual or the software described herein in whole or in part may not be reproduced translated or reduced to any machine readable form without prior written approval from Sony Corporation IN NO EVENT SHALL SONY CORPORATION BE LIABLE FOR ANY INCIDENTAL CONSEQUENTIAL OR SPECIAL DAMAGES WHETHER BASED ON TORT CONTRACT OR OTHERWISE ARISING OUT OF OR IN CONNECTION WITH THIS MANUAL THE SOFTWARE OR OTHER INFORMATION CONTAINED HEREIN OR THE USE THEREOF Sony Corporation reserves the right to make any modification to this manual or the information contained herein at any time without notice The software described herein may also be governed by the terms of a separate user license agreement Trademarks e Adaptec is a registered trademark of Adaptec Inc e Easy CD Creator and DirectCD are trademarks of Adaptec Inc e Microsoft and Windows are trademarks of Microsoft Corporation registered in the U S A and other countries Macintosh and Power PC are trademarks of Apple Computer Inc registered in the U S A and other countries All other product names mentioned herein may be the trademarks or registered trademarks of their respective compani
7. When you will not add or modify data on the disc any more also check the Protect disc so it cannot be written to again option Check that the ACCESS lamp is not lit then open the disc cover and remove the disc 12 When using a CD RW Right click the DirectCD icon on the taskbar and select Eject from the drop down list box Check that the ACCESS lamp is not lit click OK on the screen then open the disc cover and remove the disc 13 Modifying data ina disc Writing more data to a disc After you have formatted a blank disc for DirectCD use you can keep adding data to the disc until it is full To do so follow these steps 1 Insert the disc into the camera and connect the camera to your computer with the USB cable 2 After the DirectCD Disc Ready window appears click OK then write data to the disc Deleting a file from a disc If you delete files from a disc the files become invisible to the file system that is they cannot be seen in Windows Explorer but the space they occupy is not available for other files Thus deleting files from a disc does not increase the available free space on the disc To delete the contents on a disc follow these steps 1 While in Windows Explorer select the file s you want to delete 2 Select Delete from the File menu or press the Delete key Click Yes to confirm that you want to delete the files from the
8. able to be played back on the camera 11 Removing the disc Note When you write new data onto the disc before removing the disc from the camera be sure to follow the procedure below If you remove the disc or disconnect the USB cable without following the procedure data on the disc may be broken When you open the file in the disc with your application software quit it before starting the procedure below When using a CD R Right click the DirectCD icon on the taskbar and select Eject from the drop down list box The Eject Disc window appears Adaptec DirectCD Wizard Drive D 3 01a Be Eject Disc Before ejecting the DirectCD disc please decide if you want to continue using DirectCD to access it or if you want to read this disc from a standard CD ROM drive Leave the disc as itis so that it ca through acce Organize the disc so that it can be read in most standard CD ROM drives under Windows 95 98 and Windows NT Service Pack 3 or greater and Windows 2000 Note You have to make this disc writable to add more fles toi Protect disc so it cannot be written to again F Display this wizard next time eject a DirectCD disc Help Cancel 2 Check the appropriate option If you do not execute the finalization click the upper option on the window If you execute the finalization to view images on a CD ROM drive click the lower option on the window
9. documentation of the af other writing software before attempting to install the Writing software supplied DirectCD If DirectCD cannot be installed other than DirectCD without conflict USB connection may not be available and it may be necessary to finalize the disc before it can be read by the PC s CD drive To check the version of your DirectCD software Click in the following order Start Program Adaptec DirectCD gt DirectCD Wizard You can check the version on the start up screen When using a CD RW e You cannot use the CD RW which was formatted with other equipment than the camera Format it with the camera again e To view images on the CD RW using a CD ROM drive or CD R drive the drive must conform to the MultiRead type e When using a CD RW drive you can use DirectCD in the same way you would be using a CD R Note You may not be able to use DirectCD depending on your CD R drive or CD RW drive Installing DirectCD When connecting the camera to your computer using the USB cable be sure to install the USB driver before connecting the USB cable For details refer to the operating instructions of the camera E g for Windows Me users Follow these steps below to install DirectCD English version illustrations are used in this manual Turn on your computer and insert the supplied CD ROM SPVD 006 into the CD ROM drive of your computer The following window appears on the screen
10. es Furthermore TM and are not mentioned in each case in this manual Table of contents Notice for users ccccecceccesseceeeeeeeee 2 Introduction ccccccceeseceessecesseeeeee 4 Notes on using DirectCD 6 When using a CD R we 6 When using a CD RW KAT Installing DirectCD oo 8 Using DirectCD 10 Starting DirectCD 10 Writing data to a disc 11 Removing the disc cece When using a CD R When using a CD RW 13 Modifying data in a disc 0 14 Writing more data to a disc 14 Deleting a file from a disc 14 Some of the operation procedures is different according to whether you use a CD R or you use a CD RW For details on each operation see Notes on using DirectCD on page 6 or Removing the disc on page 12 3 Introduction This manual describes how to install the application software DirectCD supplied with the camera and how to use it If explanations described in this manual are different from the PDF file in the CD ROM follow explanations described in this manual Note You cannot install DirectCD into a Macintosh computer To read the disc that has been finalized copy Adaptec UDF Volume Access included in the CD ROM SPVD 006 supplied with the camera to System folder of your computer and restart your computer What DirectCD does Once you install DirectCD into your computer and connect the camera and the
11. type of writing software installed on your computer Aversion of DirectCD earlier Before installing DirectCD DirectCD is not required to only view images on the finalized disc in a CD ROM drive If you read or write images on the disc which is not finalized you have to connect the camera to your computer with the USB cable and install DirectCD into your computer For details on USB connection refer to the operating instructions of the camera Install the supplied version of DirectCD on your computer without uninstalling the current version of DirectCD USB functionality is established automatically When any of these types of writing software has thanys 016 598 been installed do not install the supplied DirectCD on the computer A malfunction may occur You can use the version of DirectCD now installed A version of on your computer Please do not install the DirectCD that is the supplied DirectCD USB functionality is same or later than established automatically v3 03a_S2 A USB connection between the camera and your computer cannot be established Insert the disc directly into the drive of your computer It is not necessary to finalize the disc A version of DirectCD not described above If you install the supplied DirectCD it may conflict with the existing writing software We cannot guarantee the performance of the supplied DirectCD software when other writing software has already been installed Please check the
Download Pdf Manuals
Related Search