Sony CDX-C660 User's Manual
Contents
1. 6 Press CSHIFT Notes Wait appears in the display while the unit is reading the data or when a disc has not been put into the unit e Mem Full appears in the display when you try to enter more than 12 tracks into a program Playing the stored program Changing the disc order in the changer will not affect program memory play You can select PGM 1 to play Program 1 PGM 2 to play Program 2 PGM 1 2 to play Programs 1 and 2 1 Press GHIFT 2 Press PLAY MODE repeatedly until PGM appears 3 Press gt repeatedly until the desired program appears Z PGM 1 gt PGM 2 gt PGM 142 PGM real Program Play starts 4 Press SHIFT To go back to normal playback mode select PGM off in step 3 above Notes If you press the number button during program memory play program memory play is interrupted and playback of the selected disc starts e NO Data appears in the display if no track is stored in the program e If a track stored into the program memory is not in the disc magazine the track will be skipped When the disc magazine contains no tracks stored into the program memory or when the program information has not been loaded yet Not Ready appears Erasing an entire program 1 Press SHIFT then press 3 PLAY MODE for two seconds CD2 ose Premee MERE REEO 4 731 FLAY MODE CRAASEREKI P 1 shows Progra2. 10 18 Display window DSPL display mode change button 5 10 11 14 18 19 4 eject button 5 LIST button Disc Memo 18 List up 11 18 Station memo 10 11 RELEASE front panel release button 4 21 Reset button located on the front side of the unit behind by the front panel 4 SOURCE source select button 5 9 10 14 16 18 SHIFT button PLAY MODE 6 7 8 9 10 15 16 17 19 REP 6 15 SET UP 5 13 14 SHUF 6 15 During radio reception Number buttons 9 10 During CD MD playback Direct disc selection buttons 15 POWER SELECT switch located on the bottom of the unit See POWER SELECT Switch in the Installation Connections manual Receptor for the optional wireless remote The buttons of the wireless remote work the same functions as those on this unit fT 2 B 4 5 ion OFF button MODE DIR button Function as on the unit SOURCE button SEEK AMS button PRESET DISC button You cannot do manual search and manual tuning with the remote MUTE button buttons k N e DSPL button SOUND button When the POWER SELECT switch is set to the position the unit cannot be operated with the wireless remote unless on the unit is pressed or a CD is inserted to activate the unit first uonewo u jeuonippY H 23 24 r i x Specifications AUDIO POWER SPECIFICATIONS POWER OUTPUT AND TOTAL HARMONIC DISTORTION
3. 15 watts per channel minimum continuous average power into 4 ohms 4 channels driven from 20 Hz to 20 kHz with no more than 1 total harmonic distortion Other specifications CD player section System Signal to noise ratio Frequency response Wow and flutter Laser Diode Properties Material Wavelength Emission Duration Laser output power Compact disc digital audio system 93 dB 10 20 000 Hz Below measurable limit GaAlAs 780 nm Continuous Less than 44 6 pW This output is the value measured at a distance of 200 mm from the objective lens surface on the Optical Pick up Block Tuner section FM Tuning range Antenna terminal Intermediate frequency Usable sensitivity Selectivity Signal to noise ratio 87 5 107 9 MHz External antenna connector 10 7 MHz 10 dBf 75 dB at 400 kHz 62 dB stereo 65 dB mono Harmonic distortion at 1 kHz Separation Frequency response Capture ratio AM Tuning range Antenna terminal Intermediate frequency Sensitivity 0 9 stereo 0 5 mono 35 dB at 1 kHz 30 15 000 Hz 2 dB 530 1 710 kHz External antenna connector 16 71 MHz 450 kHz 30 pV Power amplifier section Outputs Speaker impedance Maximum power output Speaker outputs sure seal connectors 4 8 ohms 40 W x 4 at 4 ohms General Outputs Tone controls Power requirements Dimensions Mounting dimensions Mass Supplied accessories Optional accessor
4. The clock uses a 12 hour digital indication Example Set the clock to 10 08 1 Press SHIFT then press SET UP Set sel ue Clock O Press Set siz sere 31280 The hour digit flashes Set the hour to go backward to go forward Mie a 08 Press Set igre 1 Q Se ye gt ARES The minute digits flash Set the minute a 2 Press SHIFT 18 88 The clock starts 3 Press CSHIFT After the mode setting is complete the display goes back to normal playback mode Note If the POWER SELECT switch on the bottom of the unit is set to the position turn the power on first then set the clock Listening to a CD Simply insert the CD Playback starts automatically Labelled side up z If a CD is already inserted press repeatedly until CD appears Elapsed playing time 7 Aeg Track number Note To play back an 8 cm CD use the optional Sony compact disc single adapter CSA 8 To Press Stop playback amp or Eject the CD 2 Changing the displayed item Each time you press SPL the item changes as follows Elapsed playback time Clock Jahejd G gt paviers u9 H ew Locating a specific track Automatic Music Sensor AMS During playback press either side of momentarily Sif To locate succeeding tracks A To locate preceding tracks Locating a specific point in a track Manual Search
5. 5 14 Program memory 7 16 Clock 5 R D E Radio 9 Dimmer 13 Repeat Play 6 15 JEN Direct disc selection 15 Reset 4 Disc Memo 18 Rotary remote 4 11 13 gt Display 5 10 14 19 2 Dual information 13 S F G H SET UP Amber 13 e Fader 13 ASerl 13 Q Front panel 4 Beep 13 3 Fuse 21 Clock 5 ae Dimmer 13 S LJ K DiInfo 13 Green 13 Iumination color 13 Loud 13 Intro Scan 6 15 RM 13 Shuffle Play 6 15 L Station Memo 10 List up 11 18 T U Local seek 10 Locating Treble 13 adisc 15 18 a specific point 6 14 V a specific track 6 14 Loudness 13 Volume 13 W X Y Z Wireless remote 23
6. During playback press SHIFT 2 Press D SHUF repeatedly until the desired setting appears Shuf 1 Shuf 2 gt Shuf 3 Shuffle Play starts 3 Press SHIFT To go back to normal playback mode select Shuf off in step 2 above Jabueyd AW d gt B 15 dedi pran 16 Creating a program Program Memory CD MD changer with the program memory function You can play tracks in the order you want by making your own program You can make two programs Program 1 and Program 2 You can select up to 12 tracks for each program You can store the programs in memory 1 Press CSHIFT then press 3 PLAY MODE for two seconds Program edit mode CD2 ox ma sunin 2 zP1 01 _ aavuoot gt Arbob Pt EHTS P 1 shows Program 1 is selected If you have labelled the disc the bank edit mode appears Press 3 PLAY MODE to display P 1 above To select Program 2 press 4 repeatedly until P 2 appears 2 Select the track you want Press repeatedly to select CD or MD Press repeatedly to select the changer Press SHIFT then press the number button to select the disc Press SHIFT Press either side of to select the track 3 Press ENTER momentarily P1 ge E v CD2 DSE track QRbOd Petty 3 gt Pl 84 4 To continue entering tracks repeat steps 2 and 3 5 When you finish entering tracks press 3 PLAY MODE for two seconds
7. During playback press and hold either side of SEEK AMS Release the button when you have found the desired point RP To search forward eA To search backward Note Tf woe or na appears in the display that means you have reached the beginning or the end of the disc and you cannot go any further Playing a CD in various modes You can play CDs in various modes e Intro Intro Scan lets you play the first 10 seconds of all the tracks e Repeat Repeat Play repeats the current track e Shuf Shuffle Play plays all the tracks in random order Searching for the desired track Intro scan 1 Press SHIFT Every time you press SHIFT SHIFT only the items you can select light up 2 Press PLAY MODE repeatedly until Intro appears Each time you press G PLAY MODE the item changes as follows intro PGM en intro of f 3 Press to select Intro on co d ntro on Intro Scan starts 4 Press CSHIFT To go back to normal playback mode select Intro off in step 3 above Playing tracks repeatedly Repeat Play 1 During playback press SHIFT 2 Press REP repeatedly until Repeat 1 appears lt lt SETUP PLAY MODE Ce SHUF Repeat Play starts 3 Press CSHIFT To go back to normal playback mode select Repeat off in step 2 above Playing tracks in random order Shuffle Play 1 D
8. lo nanliea ena 11 Other Functions Using the rotary remote oo cceesseecseseeeecees 11 Adjusting the sound characteristics 13 Muting the sound Changing the sound and display settings 13 With Optional Equipment CD MD Changer Playing a CD or MD 00 esssccecsseecstseecsseeesntteesee 14 Scanning the tracks INO SCAN feces ees idii oiie 15 Playing tracks repeatedly Repeat Play ygce 15 Playing tracks in random order Shuffle Play eerren aips 15 Creating a program Program Memory sssi 16 Labeling a CD DIse Memo eran i 18 Locating a disc by name Listeup i aaan nai 18 Selecting specific tracks for playback SBaink nics cc a iaia 19 Dismounting the unit Location of controls o ap erati k 4 Resetting the unit Before operating the unit for the first time or after replacing the car battery you must reset the unit Press the reset button with a pointed object such as a ball point pen cc R i Reset button Notes e Pressing the reset button will erase the clack and some memorized functions When you connect the power supply cord to the unit or reset the unit wait for about 10 seconds before you insert a disc If you insert a disc within these 10 seconds the unit will not be reset and you will have to press the reset button again Detaching the front panel You can detach the front panel of this unit to prevent the unit from bei
9. 4 oe G9 4 gt CD2 ase Mang Ay If you rotate the dial counterclockwise the characters appear in the reverse order If you want to put a blank space between characters select _ under bar Press after locating the desired character The flashing cursor moves to the next space CD2 _ iN DSE NAME If you press CD the flashing cursor moves to the left Repeat steps and to enter the entire name 3 To return to normal CD playback mode press for two seconds Tip To erase correct a name enter _ under bar for each character Displaying the disc memo name Press during CD playback CD2 cm 1 SCHUBERT Each time you press during CD playback the item changes as follows Elapsed playback time Disc name Erasing the disc memo 1 Press repeatedly to select CD 2 Press repeatedly to select the CD changer 3 Press for two seconds 4 Press for two seconds Rotate the dial to select the name you want to erase 6 Press ENTER for two seconds The name is erased Repeat steps 5 and 6 if you want to erase other names 7 Press for two seconds The unit returns to normal CD playback mode Locating a disc by name List up CD changer with the custom file function or MD changer You can use this function for discs that have been assigned a custom name For more information on disc names refer to Labelin
10. SONY FM AM Compact Disc Player Operating Instructions JEN Owner s Record The model and serial numbers arc located on the bottom of the unit Record the serial number in the space provided below Refer to these numbers whenever you call upon your Sony dealer regarding this product Model No CDX C660 Serial No For installation and connections see the supplied installation connections manual f COMPACT DIGITAL AUDIO CDX C660 1997 by Sony Corporation rene Warning This equipment has been tested and found to comply with the limits for a Class B digital device pursuant to Part 15 of the FCC Rules These limits are designed to provide reasonable protection against harmful interference in a residential installation This equipment generates uses and can radiate radio frequency energy and if not installed and used in accordance with the instructions may cause harmful interference to radio communications However there is no guarantee that interference will not occur ina particular installation If this equipment does cause harmful interference to radio or television reception which can be determined by turning the equipment off and on the user is encouraged to try to correct the interference by one or more of the following measures Reorient or relocate the receiving antenna Increase the separation between the equipment and receiver Connect the equipmen
11. changer NG Discs A CD MD cannot play because of some problem Insert another CD MD Error A CD is dirty or inserted upside down An MD does not play because of some problem Clean or insert the CD correctly Insert another MD Blank No tracks have been recorded on an MD 2 PushReset The CD MD changer cannot be operated because of some problem Play an MD with tracks recorded on it Press the reset button of the unit Not Ready The lid of the MD changer is open or MDs are not inserted properly HighTemp The ambient temperature is more than 50 C 122 F Close the lid or insert the MDs properly Wait until the temperature goes down below 50 C 122 F When an error occurs during playback of an MD or CD the disc number of the MD or CD dose not appear in the display The disc number of the disc causing the error appears in the display If the above mentioned solutions do not help improve the situation consult your nearest Sony dealer Rg ON DE IT ITT TT EDT TTT index A M N O Automatic Music Sensor AMS 6 14 Manual search 6 14 Automatic tuning 9 Manual tuning 10 Auto Scroll 14 MD playback 14 Memorizing a station 10 B Monaural mode 10 Mute 13 Balance 13 Bass 13 Bank Play 19 P Q Beep tone 13 PLAY MODE Best Tuning Memory BTM 9 Bank 19 Intro 6 15 Cc Local 10 Mono 10 Caution alarm 4 PGM 7 16 CD playback
12. f the MD is too long you can scroll it across the display by pressing SHIFT then O H Automatically scrolling a disc name Auto Scroil If the disc name or track name on an MD exceeds 10 characters and the Auto Scroll function is on automatically scrolls on the display as follows The disc name appears when the disc has changed if the disc name is selected The track name appears when the track has changed if the track name is selected The disc or track name appears depending on the setting when you press to select an MD If you press to change the display item the disc or track name of the MD is scrolled automatically whether you set the function on or off 1 During playback press SHIFT 2 Press SET UP repeatedly until A Scri appears 3 Press gt to select A Scrl on 4 Press To cancel Auto Scroll select A Scrl off in step 2 above Displaying the recording date of the current MD Press for two seconds during MD playback The recording date of the track is displayed for about three seconds Locating a specific track Automatic Music Sensor AMS During playback press either side of once for each track you want to skip ESA To locate succeeding tracks eA To locate preceding tracks Locating a specific point in a track Manual Search During playback press and hold either side of SEEK AMS Release the button when you have found the desired
13. fader 2 Adjust the selected item by rotating the dial i Adjust within three seconds after selecting the item After three seconds the dial functions work as the volume control a Muting the sound Press MUTE on the rotary remote or wireless remote Mute on flashes momentarily To restore the pfevious volume level press MUTE again Tip The unit decreases the volume automatically when a telephone call comes in Telephone mute function Changing the sound and display settings You can set e Clock page 5 D Info Dual Information to display the clock and the play mode at the same time ON or to display the information alternately OFF Amber Green to change the illumination color to amber or green Dimmer to change the brightness of the display Select Auto to dim the display only when you turn the lights on Select on to dim the display e Contrast to adjust the contrast if the indications in the display are not recognizable because of the unit s installed position Beep to turn on or off the beeps e RM Rotary Remote to change the operative direction of the controls of the rotary remote Select norm to use the rotary remote as the factory preset position Select rev when you mount the rotary remote on the right of the steering column Loud Loudness to enjoy bass and treble even at low volume The bass and treble will be re
14. for two seconds 6 Press CSHIET Erasing tracks in a program 1 Press CSHIFT then press 3 PLAY MODE for two seconds C02 wabuneniiys 03 2 aA 3 eM TETEL P 1 shows Program 1 is selected If you have labelled the disc the bank edit mode appears Press G PLAY MODE to display P 1 above To select Program 2 press 4 gt repeatedly until P 2 appears 2 Press or to select the track you want to erase Track slot number CD2 O TSELIS TS ITELEEITITI EN z3 3 P1 The track currently registered in slot 6 of Program 1 3 Press ENTER for two seconds When you erase a track from a slot number the succeeding tracks shift up to fill the gap DEL Se eee eee 4 CD2 TRACK apteseearey b m PLAY MODE KEAN 4 To continue erasing tracks repeat steps 2 and 3 5 When you finish erasing tracks press PLAY MODE for two seconds 6 Press SHIFT JaBuey gt Quad B 17 18 Labeling a CD disc Memo CD changer with the custom file function You can label each disc with a personalized name You can enter up to eight characters for a disc If you label a CD you can locate the disc by name and select the specific tracks for playback page 19 1 Play the CD and press for two seconds cD2 t fue OSC NAME 2 Enter the characters Rotate the dial clockwise to select the desired characters A B gt C gt Z 0 gt 1 42
15. g a CD 1 Press momentarily The name assigned to the current disc appears in the display LEST 7 SCHUBERT 2 Press repeatedly until you find the desired disc 3 Press ENTER to play back the disc Notes After a disc name has been displayed for five seconds the display goes back to normal playback mode To turn off the display press COSPL The track names are not displayed during MD playback If there are no discs in the magazine NO Disc appears in the display Ifa disc has not been assigned a custom file appears in the display If the disc information has not been read by the unit appears in the display To load the disc first press the number button then choose the disc that has not been loaded The information appears only in upper case There are also some letters which cannot be displayed during MD playback Selecting specific tracks for playback Bank CD changer with the custom file function If you label the disc you can set the unit to skip tracks and play only the tracks you want 1 Start playing the disc and press SHIFT Then press 3 PLAY MODE for two seconds Bank edit mode ee N Play PLAY NOCE ENER Note If you have not labeled the disc the bank edit mode does not appear and the programme edit mode appears To go back to normal playback mode press SHIFT 2 Press either side of to select the track number you want
16. ies Optional equipment Line outputs 2 Power antenna relay control lead Power amplifier control lead Bass 10 dB at 100 Hz Treble 10 dB at 10 kHz 12 V DC car battery negative ground Approx 188 x 58 x 177 mm 71 2 23 8 7 in w h d Approx 178 x 50 x 154 mm 7 8x2x61 sin w h d Approx 1 5 kg 3 lb 4 9 oz Rotary remote 1 Parts for installation and connections 1 set Front panel case 1 Wireless remote RM X41 BUS cable supplied with an RCA pin cord RC 61 1 m RC 62 2 m RCA pin cord RC 63 1 m RC 64 2 m RC 65 5 m Cleaning cloth XP CD1 Compact disc single adapter CSA 8 CD changer CDX 705 10 discs CDX T65 6 discs CDX T62 6 discs MD changer MDxX 60 MDX 61 Source selector XA C30 Design and specifications are subject to change without notice Troubleshooting guide The following checklist will help you remedy the problems you may encounter with your unit Before going through the checklist below check the connection and operating procedures General Problem Cause Solution No sound e Cancel the MUTE function e Set the fader control to the center position for two speaker systems Rotate the dial in a clockwise direction to adjust the volume The contents of the memory e The power cord or battery has been disconnected have been erased e The reset button has been pressed Store again into the memory Indications do not appear in the Remove the front
17. inforced A Scrl Auto Scroll page 14 1 Press HID 2 Press SET UP repeatedly until the desired item appears Each time you press 2 SET UP the item changes as follows Clock D Info Amber Green Dimmer Contrast Beep RM Loud A Scrl When you have not tune the station or there is no CD MD being played these items will not appear Note The displayed item will differ depending on the source 3 Press G to select the desired setting for example on or off For the Contrast setting pressing G4 makes the contrast higher and pressing CD 4 makes the contrast lower 4 Press CSHIFT After the mode setting is complete the display goes back to normal playback mode suoloun4 i 13 14 x CDIMD Changer You can control up to 7 CD and MD changers with this unit Playing a CD or MD 1 Press repeatedly to select the CD or MD 2 Press MODE MODE until the desired changer appears CD MD playback starts When a CD or MD changer is connected al the tracks play from the beginning Changing the displayed item Each time you press during CD MD playback the item changes as follows Elapsed playback time Disc name Track name Clock 1 If you have not labeled the disc NO D Name appears in the display 2 If the track name of an MD is not prerecorded NO T Name appear in the display Tip If the name o
18. ions on each band FM1 FM2 and AM Caution When tuning in stations while driving use Best Tuning Memory to prevent accidents 1 Press repeatedly to select the tunes Each time you press SOURCE the source changes as follows CD TUNER 2 Press repeatedly to select the band Each time you press MODE the band changes as follows a a aad eee il 3 Press CSHIFT then press 3 PLAY MODE repeatedly until B T M appears 4 press D gt The unit stores stations in the order of their frequencies on the number buttons A beep sound and the setting is stored 5 Press SHIFT r x Notes e The unit does not store stations with weak signals If only a few stations are received some number buttons will retain heir former setting When a number is indicated in the display the unit starts storing stations from the one currently displayed Memorializing only the desired stations You can store up to 10 stations on each band 20 for FM1 and FM2 10 for AM in the order of your choice 1 Press repeatedly to select the tuner 2 Press repeatedly to select the band FM1 FM2 or AM 3 Press either side of to tune in the station you want to store on the number button 4 Keep the desired number button CD to i0 pressed for two seconds until MEM appears The number button indication appears in the display Note If you try to store another station on the same number button
19. m 1 is selected If you have labelled the disc the bank edit mode appears Press 3 PLAY MODE to display P 1 above 2 Press repeatedly until DEL appears DEL RTs Pare ef s To erase Program 2 press 4 gt repeatedly until PGM 2 appears 3 Press CS ENTER for two seconds NO Data gntea The entire program is erased 4 When you finish erasing programs press PLAY MODE for two seconds 5 Press SHIFT Adding tracks to a program 1 Press SHIFT then press 3 PLAY MODE for two seconds CD2 4 i SLOOP its lee 2 P1 g 4 gt Et CUVEE LEA P 1 shows Program 1 is selected If you have labelled the disc the bank edit mode appears Press 3 PLAY MODE to display P 1 above To select Program 2 press 4 gt repeatedly until P 2 appears 2 Press O or to select the track slot number where you want to insert a track Track slot number CD22 sggerrcayrersresatys 3 2 Pi 3 Press either side of SEEK AMS to select the track you want to insert 4 Press CS ENTER momentarily t to enter the track The current track in that slot number and the succeeding tracks shift down To continue inserting tracks repeat steps 2 through 4 Note Once all 12 slots have been filled Mem Full appears in the display and you cannot insert tracks 5 When you finish inserting tracks press PLAY MODE
20. mes from the speakers of two speaker systems set the fader control to the center position e If your car is equipped with a power aerial it will extend automatically while the unit is operating If you have any questions or problems concerning your unit that are not covered in this manual please consult your nearest Sony dealer Notes on handling CDs A dirty or defective disc may cause sound dropouts while playing To enjoy optimum sound handle the disc as follows Handle the disc by its edge To keep the disc clean do not touch the surface Do not stick paper or tape on the labelled surface Do not expose the discs to direct sunlight or heat sources such as hot air ducts or leave them in a car parked in direct sunlight where there can be a considerable rise in the temperature inside the car x S gt Before playing clean the discs with an optional cleaning cloth Wipe each disc from the center out Do not use solvents such as benzine thinner commercially available cleaners or antistatic spray intended for analog discs EN EA y ji Notes on moisture condensation On a rainy day or in a very damp area moisture may condense on the lenses inside the CD player Should this occur the unit will not operate properly In this case remove the disc and wait for about an hour until the moisture evaporates When you play 8 cm CDs Use the optional Sony compact disc single adapter CSA 8 to protec
21. ng stolen 1 Press COFF 2 Press to open up the front panel Then slide the front panel a little to the left and pull it off towards you x Notes Be sure not to drop the panel when detaching it from the unit If you press to detach the panel while the unit is still on the unit will turn off automatically to prevent the speakers from being damaged When you carry the front panel with you put it in the supplied front panel case Attaching the front panel Align part of the front panel to part of the unit as illustrated and push until it clicks Notes Be sure not to attach the front panel upside down Do not press the front panel hard against the unit when attaching it Press it lightly against the unit Do not press hard or put excessive pressure on the display windows of the front panel Do not expose the front panel to direct sunlight heat sources such as hot air ducts and do not leave it in a humid place Never leave it on the dashboard of a car parked in direct sunlight where there may be a considerable rise in temperature Caution alarm If you turn the ignition key switch to the OFF position without removing the front panel the caution alarm will beep for a few seconds only when the POWER SELECT switch is set to the position Preparing the rotary remote When you mount the rotary remote attach the label in the illustration below SN PD Setting the clock
22. ntil PGM appears 3 Press gt repeatedly until the desired program appears Program 1 playback en Pem PLAY uow gt Program 2 playback cD PEM 4 Programs 1 and 2 playback CD peM 142 4 Normal playback Pam off Program Play starts 4 Press SHIFT To go back to normal playback mode select PGM off in step 3 above Note NO Data appears in the display if no track is stored in the program Erasing an entire program 1 Press CSHIFT then press 3 PLAY MODE for two seconds CD race QMEUEDD ERLE PUY MODE gt Kita al tt ates P 1 shows Program 1 is selected 2 Press i repeatedly until DEL appears DEL SUUCULEEE MULCH d 2s Kobig aot 1 detndah CEE AS To delete Program 2 press gt repeatedly until PGM 2 appears 3 Press CS ENTER for two seconds P1 5 sis NO Data The entire program is erased 4 When you finish erasing programs press C3 PLAY MODE for two seconds 5 Press HFT 1 ejd dd 2 Adding tracks to a program 1 6 7 Press SHIFT then press 3 PLAY MODE for two seconds CD voce QVELIIS TESS awug op GRA VALENTIN P 1 shows Program 1 is selected To select Program 2 press 4 repeatedly until P 2 appears Press 4 or 4 to select the track slot number where you want to insert a track Track slot numbe
23. panel and clean the connectors See Cleaning display the connectors page 21 for details CD MD playback Problem Cause Solution A disc cannot be loaded Another CD is already loaded e The CD is forcibly inserted upside down or in the wrong way MD Playback does not begin Defective MD or dusty CD A disc is automatically ejected The ambient temperature exceeds 50 C 122 F The operation buttons do not Press the reset button function The sound skips due to e The unit is installed at an angle of more than 20 vibration e The unit is not installed in a sturdy part of the car Radio reception Problem Cause Solution Preset tuning is not possible e Memorize the correct frequency e The broadcast signal is too weak Automatic tuning is not The broadcast signal is too weak possible lt Use manual tuning The ST indication flashes Tune in the frequency accurately e The broadcast signal is too weak Set to the MONO mode page 10 uonewoyzuj eUOITIPpY g 25 26 Error displays when an optional CD MD changer is connected The following indications will flash for about five seconds and an alarm sound will be heard Display NO Mag Cause The disc magazine is not inserted in the CD MD changer NO Disc No disc is inserted in the CD MD changer Solution Insert the disc magazine in the CD MD changer Insert discs in the CD MD
24. point S217 To search forward eA To search backward Locating a disc by disc number Direct Disc Selection Press the number button that corresponds with the desired disc number The desired disc in the current changer begins playback ea Scaring the tracks Intro Scan You can play the first 10 seconds of all the tracks on the current disc 1 During playback press SHIFT then press 3 PLAY MODE repeatedly until Intro appears 2 Press C gt to select Intro on Intro Scan starts 3 Press SHIFT To go back to normal playback mode select Intro off in step 2 above EE Playing tracks repeatedly Repeat Play You can select e Repeat 1 to repeat a track e Repeat 2 to repeat a disc e Repeat 3 to repeat all the discs in the current changer 1 During playback press SHIFT 2 Press REP repeatedly until the desired setting appears gt Repeat 1 gt Repeat 2 _ gt Repeat 3 Repeat off ge Repeat Play starts 3 Press SHIFT To go back to normal playback mode select Repeat off in step 2 above Nate When you play back a CD on this unit Repeat 3 has the same function as Repeat 2 Playing tracks in random order shuffie Play You can select Shuf 1 to play the tracks on the current disc in random order Shuf 2 to play the tracks in the current changer in random order Shuf 3 to play all the tracks in random order 1
25. r whhttbatteteatt cD _ FLAY MORE Press either side of to select the track you want to insert Press ENTER momentarily to enter the track The current track in that slot number and the succeeding tracks shift down To continue inserting tracks repeat steps 2 through 4 Note Once all 12 slots have been filled Mem Full appears in the display and you cannot insert tracks When you finish inserting tracks press 3 PLAY MODE for two seconds Press SHIFT Erasing tracks in a program 1 4 5 6 Press SHIFT then press PLAY MODE for two seconds CD _ paywa ee CS P 1 shows Program 1 is selected cea A REED E SINE To select Program 2 press 4 repeatedly until P 2 appears Press D or 4 to select the track you want to erase Track slot number lt Fi 3 P1 B The track currently registered in slot 6 of Program 1 Press ENTER for two seconds When you erase a track from a slot number the succeeding tracks shift up to fill the gap DEL gt s ma 4 tD P1 06 To continue erasing tracks repeat steps 2 and 3 When you finish erasing tracks press 3 PLAY MODE for two seconds Press SHIFT Memorizing stations automatically Best Tuning Memory BTM The unit selects the stations with the strongest signals and memorizes them in the order of their frequencies You can store up to 10 stat
26. ress LIST for two seconds Press for two seconds Delete and the station name appear in the display Rotate the dial to select the name you want to erase Press ENTER for two seconds The name is erased Repeat steps 3 and 4 if you want to erase other names Press LIST for two seconds The unit returns to normal radio reception mode SS ee ae Locating a station by name List up 1 3 Press momentarily The name assigned to the current station appears in the display ST 3 urkiss ENTES Press repeatedly until you find the desired station Press ENTER to tune in the desired station Note After the station name or frequency has been displayed for five seconds the display goes back to normal mode To turn off the display press CDSPL Other Functions Using the rotary remote The rotary remote works by pressing buttons and or rotating controls You can control an optional CD or MD changer with the rotary remote By pressing buttons the SOURCE and MODE buttons Each time you press SOURCE the source changes as follows TUNER CD MD Pressing changes the operation in the following ways e Tuner FM1 FM2 AM CD changer CD1 CD2 MD changer MD1 MD2 Tip When the POWER SELECT switch is set to position you can turn on this unit by pressing on the rotary remote suoIpuny4 mo 11 p 12 By
27. rotating the control the SEEK AMS control Rotate the control momentarily and release it to e Locate a specific track on a disc Rotate and hold the control until you locate the specific point in a track then release it to start playback e Tune in stations automatically Rotate and hold the control to tune in a specific station By pushing in and rotating the m control the PRESET DISC control Push in and rotate the control to e Receive the stations memorized on the number buttons e Change the disc Other operations Rotate the VOL control to adjust the volume Press to mute the sound Press to turn off the unit Press to adjust the volume and sound menu Press to display memorized names Changing the operative direction The operative direction of controls is factory set as in the illustration below To increase To decrease If you need to mount the rotary remote on the right side of the steering column you can reverse the operative direction Press for two seconds while pushing the VOL control Tip You can control the operative direction of controls with the unit page 13 Adjusting the sound characteristics You can adjust the bass treble balance and fader Each source can store the bass and treble levels respectively 1 Select the item you want to adjust by pressing repeatedly VOL volume BAS bass TRE treble BAL balance FAD
28. t into an outlet on a circuit different from that to which the receiver is connected Consult the dealer or an experienced radio TV technician for help You are cautioned that any changes or modifications not expressly approved in this manual could void your authority to operate this equipment CAUTION The use of optical instruments with this product will increase eye hazard Welcome Thank you for purchasing the Sony Compact Disc Player This unit lets you enjoy a variety of features by using either a supplied rotary remote or an optional wireless remote In addition to the CD playback and radio operations you can expand your system by connecting an optional CD MD changer Table of Contents This Unit Only Getting Started Resetting the unit n se 4 Detaching the front panel 0 ecescscecceeeseeeeee 4 Preparing the rotary remote essesccesseseeees 4 Setting the Clock cccscccecseccseessseeseestiesseeeeens 5 CD Player Listening to a CD oo eeceeeseesseesesestessseesseeseeees 5 Playing a CD in various modes c cseceeo 6 Creating a program CD Program Memory T Z Radio Memorizing stations automatically Best Tuning Memory BTM c 0000 9 Memorizing only the desired stations 9 Receiving the memorized stations 0 00 10 Storing the station names Station Memo cceeccecssecsecseesseessees 10 Locating a station by name List up eeina
29. t the CD player from being damaged Maintenance Dismounting the unit Fuse replacement When replacing the fuse be sure to use one that matches the amperage described on the fuse If the fuse blows check the power connection and replace the fuse If the fuse blows again after replacement there may be an internal malfunction In such a case consult your nearest Sony dealer Release key supplied Fuse 10 A ea Warning Nev fuse a fuse with an amperage rating exceeding the one supplied with the unit as this could damage the unit Cleaning the connectors The unit may not function properly if the connectors between the unit and the front panel are not clean To prevent this open the front panel by pressing RELEASE then detach it and clean the connectors with a cotton swab dipped in alcohol Do not apply too much force Otherwise the connectors may be damaged Press the clip inside the front cover with a thin screwdriver and lever the front cover free Main unit Back of the front panel UOITEWIOJU jEUOHIPpY 2 Location of controls k N oy e N e e 10 22 Refer to the pages for details SEEK AMS seek Automatic Music Sensor manual search button 6 7 8 9 10 14 15 16 17 19 SOUND button 13 MODE band changer select button 9 10 14 16 18 OFF button 4 5 Dial volume bass treble balance fader control 5
30. the previously stored station will be erased olpeyahe d B man tekaa 10 Receiving the memorized Stations 1 Press repeatedly to select the tuner 2 Press repeatedly to select the band FM1 FM2 or AM 3 Press the number button CD to a0 momentarily where the desired station is stored If you cannot tune in a preset station Press either side of momentarily to search for the station automatic tuning Scanning stops when the unit receives a station Press either side of repeatedly until the desired station is received Note If the automatic tuning stops too frequently press CSHIFT then press 3 PLAY MODE repeatedly until Local local seek mode is displayed Then press 4 to select Local on Press SHIFT Only the stations with relatively strong signals will be tuned in Tip If you know the frequency of the station you want to listen to press and hold either side of for two seconds until the desired frequency appears manual tuning if FM stereo reception is poor Monaural Mode 1 Press SHIFT then press 3 PLAY MODE repeatedly until Mono appears 2 Press repeatedly until Mono on appears The sound improves but becomes monaural ST disappears 3 Press CSHIFT To go back to normal mode select Mono off in step 2 above Changing the displayed items Each time you press SPD the item changes as follows Frequenc
31. to skip and press 5 ENTER eUe ache PLAY MODE ENEE The indication changes from Play to Skip If you want to return to Play press ENTER again 3 Repeat step 2 to set the Play or Skip mode on all the tracks 4 Press PLAY MODE for two seconds The unit returns to normal CD playback mode 5 Press CSHIFT Notes e You can set the Play and Skip mode on up to 24 tracks You cannot set the Skip mode on all the tracks Playing the specific tracks only You can select e Bank on to play the tracks with the Play setting e Bank inv Inverse to play the tracks with the Skip setting 1 During playback press SHIFT then press 3 PLAY MODE repeatedly until Bank appears 2 Press D to repeatedly until the desired setting appears gt Bank on gt Bank inv gt Bank off A coi n Bank on Playback starts from the track following the current one 3 Press SHIFT To go back to normal playing mode select Bank off in step 2 above JaBuey aW d gt H 19 20 Additional Information Precautions If your car was parked in direct sunlight resulting in a considerable rise in temperature inside the car allow the unit to cool off before operating it e If no power is being supplied to the unit check the connections first If everything is in order check the fuse If no sound co
32. uring playback press GGHIFT 2 Press SHUF repeatedly until Shuf 1 appears Shuffle Play starts 3 Press SHIFT To go back to normal playback mode select Shuf off in step 2 above hE PBL RADI LIL RESALE LEM PRR ALARA HA a S Creating a program CD Program Memory You can play the tracks in the order you want by making your own program You can make two programs Program 1 and Program 2 You can select up to 12 tracks for each program You can store the programs in memory 1 Press CHET then press 2 PLAY MODE for two seconds cD race SARDELE _ paywone e Kida P 1 shows Program 1 is selected To select Program 2 press gt repeatedly until P 2 appears 2 Press either side of to select the gt track you want 3 Press ENTER momentarily P1 t PLAY MODE tEnte rt 4 CD rae SME i 314 Paryooe m AM LUA TERED 4 To continue entering tracks repeat steps 2 and 3 5 When you finish selecting tracks press 3 PLAY MODE for two seconds 6 Press GSHIFT Notes e Wait appears in the display while the unit is reading the data Mem Full appears in the display when you try to enter more than 12 tracks into a program Playing the stored program You can select PGM 1 to play Program 1 e PGM 2 to play Program 2 e PGM 1 2 to play Programs 1 and 2 1 Press SHIFT 2 Press PLAY MODE repeatedly u
33. y gt Clock Storing the station names Station Memo You can assign a name to each radio station and store it in memory The name of the current station appears in the display You can store up to eight characters for each station Storing the station names 1 Tune in a station whose name you want to store 2 Press for two seconds FMI K d 75 pe 3 Enter the characters Rotate the dial clockwise to select the desired characters A gt BC gt Z 0 gt 15 2 gt oe 9 gt gt gt caia If you rotate the dial counterclockwise the characters appear in the reverse order If you want to put a blank space between characters select _ under bar Press after locating the desired character The flashing cursor moves to the next space FM1 His If you press QD the flashing cursor moves to the left Repeat steps and to enter the entire name 4 To return to normal radio reception press for two seconds Tip To erase correct a name enter _ under bar for each character AIRES PEE ENTA CO ET DALI aR Leai Displaying the station name Press during radio reception FMI 3 wRKISS Each time you press SPD the item changes as follows is Station name gt Frequency gt eas If the station name is not stored NO Name appears in the display for one second Erasing the station name 1 2 Tune in any station and p
Download Pdf Manuals
Related Search