Sony RM-X302 User's Manual
Contents
1. 0 10 is displayed at the lowest setting LPF Low Pass Filter To select the subwoofer cut off frequency off e 125Hz or 78Hz AUX Level To adjust the volume level for each connected auxiliary equipment This setting negates the need to adjust the volume level between sources Adjustable level 6 dB 0 dB e _6 dB When the unit is turned off Customizing the equalizer curve E03 Tune Custom of EQ3 allows you to make your own equalizer settings 1 Selecta source then press MENU Select Sound gt EQ3 Preset gt Custom using the joystick Select EQ3 Tune using the joystick Select the desired frequency range from LOW MID and HI Select the frequency you wish to adjust Adjustable frequency in each range LOW 60 Hz or 100 Hz MID 500 Hz or 1 0 kHz HI 10 0 kHz or 12 5 kHz a AO N 6 Adjust the equalizer curve The volume level is adjustable in 1 dB steps from 10 dB to 10 dB 7 Press the joystick Repeat steps 4 to 7 to adjust other frequencies To restore the factory set equalizer curve select Initialize gt Yes in step 4 Tip Other equalizer types are also adjustable2. Location of controls and basic operations Audio function Main unit BBEMP PAUSE Front panel removed MEX BT5000 Warning if your car s ignition has no ACC position After turning the ignition off be sure to press and hold on the unit until the display disappears Otherwise the display does not turn off and this causes battery drain 2006 Sony Corporation Card remote commander RM X302 1 SOURCE button To power on change the source Radio CD MD Bluetooth AUDIO AUX 2 Joystick LIST button Rotate to Adjust the volume Push up down left right to Select a menu item Press to Apply a setting CD MD Push up down to Skip groups albums 4 push Skip groups albums continuously push and hold Push left right to Skip tracks push Skip tracks continuously push then push again within about 2 seconds and hold Reverse fast forward a track push and hold 3 4 5 6 7 8 9 Radio Push up down to Receive stored station Push left right to Tune in stations automatically push Find a station manua
3. off RM Rotary Commander To change the operative direction of the rotary commander controls NORM e to use the rotary commander in the factory set position REV when you mount the rotary commander on the right side of the steering column AUX Audio To turn the AUX source display on e or off Version To display the unit s firmware version Display Image To set various display images SpaceProducer to create animated on screen patterns in time with the music All to step repeatedly through the display images in all display modes off to not display any image SA 1 5 to display the Spectrum Analyzer Movie 1 3 to display a movie Wallpaper 3 to display a wallpaper SA All Movie All Wallpaper All to step repeatedly through the display images of each mode Info Information To display the items depending on the source etc All to display all items Simple to not display any items Clear to have items automatically disappear Demo Demonstration To set on or off Dimmer To change the brightness of the display Auto to dim the display automatically when you turn lights on on to dim the display off to deactivate the dimmer Auto Scroll
4. them You can store up to 6 stations per band FM1 FM2 FM3 MW and LW Caution When tuning in stations while driving use Best Tuning Memory to prevent accidents 1 Press repeatedly until TUNER appears To change the band press repeatedly You can select from FM1 FM2 FM3 MW or LW Press MENU Push the joystick up down until Receive Mode appears then push it right Push the joystick up down until BTM appears a A ODN Press the joystick The unit stores stations in order of frequency on the number buttons A beep sounds when the setting is stored Display items Example when you set Info information mode to All see Adjusting menu items o a p Q Source MP3 ATRAC WMA indication Clock Track number Elapsed playing time Disc artist name Album group number Album group name Track name Text information When playing an MP3 ID3 tag is displayed when playing ATRAC CD text information written by SonicStage etc is displayed and when playing WMA WMA tag is displayed To change display items press OSPL scroll display items press GSCRL on the card remote commander or set Auto Scroll on OO Repeat and shuffle play 1 During playback press GD REP or SHUF repeatedly until the desired setting appears Select To play Repeat Track track repeatedly Repeat Album album repeatedly Repeat Group
5. To scroll long displayed item automatically when the disc album group track is changed on to scroll off e to not scroll ID3 Tag To switch the priority of the displayed ID3 tag character when CD is selected as the source EUR e Western Europe display character priority RUS Cyrillic display character priority Receive Mode Local Local seek mode off e to tune normal reception on to only tune into stations with stronger signals Mono Monaural mode To improve poor FM reception select monaural reception mode off e to hear stereo broadcast in stereo on to hear stereo broadcasts in monaural Regional To set on e or off BTM To store radio stations automatically Sound EQ3 Preset To select an equalizer type Xplod Vocal Edge Cruise Space Gravity Custom or Off e EQ3 Tune To customize the equalizer curve DSO To select the DSO mode 1 2 3 or off e The larger the number the more enhanced the effect Balance To adjust the balance between the right and left speakers R10 0 e L10 Fader To adjust the balance between the front and rear speakers F10 0 e R10 Subwoofer To adjust the subwoofer volume 10
6. group repeatedly Shuffle Album Shuffle Group Shuffle Disc album in random order group in random order disc in random order 1 When an MP3 WMA is played 2 When an ATRAC CD is played To return to normal play mode select Repeat off or Shuffle off SET UP RADIO Econ Adjusting menu items MENU 1 Press MEND 2 Push the joystick up down until the desired menu item appears then push it right The items changes as follows Setup gt Display gt Receive Mode Sound 3 Push the joystick up down until the desired setting item appears then push it right The digital indication moves to the right setting selection side 4 Push the joystick up down to select the setting then press it The setting is complete 5 Press MENU The display returns to normal play reception mode Note Displayed items will differ depending on the source and setting Tips e You can go to the next menu level by pressing the joystick e In step 5 push the joystick left until EXIT appears then press the joystick instead of pressing MENU e You can enter the Sound setting menu directly by pressing on the card remote commander The following items can be set follow the page reference for details e indicates the default settings Setup Clock Adjust To set the clock CT Clock Time To set on or off e Beep To set on e or
7. l erase the clock setting and some stored contents eject button To eject the disc The following buttons on the card remote commander have also different buttons functions from the unit ENTER button To apply a setting LIST button To list up Number buttons Buttons to 6 share the same functions as the number buttons on the unit T buttons The same as pushing the joystick up down lt lt I4 gt PPI buttons The same as pushing the joystick left right SCRL scroll button To scroll display item SOUND button To select sound items ATT attenuate button To attenuate the sound To cancel press again VOL volume buttons To adjust volume 1 When an MD changer is connected 2 If the changer is connected the operation is different 3 When an ATRAC CD is played 4 When an MP3 WMA is played 5 When a CD MD changer is connected 6 When playing back on this unit Note If the unit is turned off and the display disappears it cannot be operated with the card remote commander unless on the unit is pressed or a disc is inserted to activate the unit first Bluetooth function Main unit For details on the Bluetooth function see the supplied Enjoy using Bluetooth wireless techno
8. lly push and hold Press to Display the list MODE button To select the radio band FM MW LW select the unit 5 MENU button To enter menu Display window OPEN button OFF button To power off stop the source Receptor for the card remote commander AF TA button AF Alternative Frequencies TA Traffic Announcement TP Traffic Programme Each time you press AF TA the item changes as follows AF on TA on AF TA on gt AF TA off Number buttons CD MD CG REP SHUF BBE MP To activate the BBE MP function set BBE MP on To cancel set BBE MP off PAUSE To pause playback To cancel press again Radio To receive stored stations press store stations press and hold m DSPL display PTY Programme Type button To change display items select PTY in RDS press PTY then push the joystick up down to search for the station and press Disc slot To insert the disc label side up Playback starts automatically You can play CD DA also containing CD TEXT CD R CD RW MP3 WMA files also containing Multi Session and ATRAC CD ATRAC3 and ATRAC3 plus format RESET button Detach the front panel and press the RESET button with a pointed object such as a ballpoint pen Notes e Before operating the unit for the first time or after replacing the car battery or changing the connections you must reset the unit e Pressing the RESET button wil
9. logy or Operating Instructions 1 2 SOURCE button To power on change the source Radio CD MD 1 Bluetooth AUDIO AUX Joystick Rotate to Adjust the volume Push up down left right to Select a menu item Press to Apply a setting Bluetooth audio device Push left right to Skip tracks push Reverse fast forward a track push and hold 3 Bluetooth button To access the Bluetooth functions receive a call 4 MENU button To enter menu receive a call 5 Display window 6 OFF button To power off stop the source end or reject a call 7 CALL button 8 Receptor for the card remote commander To access the telephone functions receive a call Card remote commander RM X302 a 9 10 m Number buttons To call stored dials Bluetooth audio device 6 PAUSE To pause playback Bluetooth indicator Lights up when the Bluetooth signal is input output Goes off when the Bluetooth signal is off Microphone The following buttons on the card remote commander have also different buttons functions from the unit ENTER button To apply a setting Number buttons To input numbers phone number passcode etc Buttons 1 to 6 share the same functions as the number buttons on the unit x button f buttons The same as pushing the joystick up down I lt gt gt P buttons The sa
10. me as pushing the joystick left right VOL volume buttons To adjust volume button 1 When an MD changer is connected 2 When a Bluetooth audio device supports AVRCP of Bluetooth technology is connected Depending on the device certain operations may not be available Detaching the front panel You can detach the front panel of this unit to prevent theft 1 Press OFF The unit is turned off 2 Press OPEN The front panel is flipped down 3 Slide the front panel to the right then gently pull out the left end of the front panel Attaching the front panel Place the hole of the front panel onto the spindle on the unit then lightly push the left side in Press on the unit or insert a disc to operate the unit Setting the clock The clock uses a 24 hour digital indication 1 Press MENU Push the joystick up down until Setup appears then push it right 2 3 Push the joystick up down until Clock Adjust appears then push it right 4 Push the joystick up down to set the hour and minutes To move the digital indication push the joystick left right 5 After setting the clock press the joystick The clock starts Tip You can set the clock automatically with the RDS feature For details see Adjusting menu items and set to CT on Clock Time I Storing stations automatically BTM The unit selects strong signal stations and stores
Download Pdf Manuals
Related Search