Soehnle 2761 User's Manual
Contents
1. EETA Displaying the tare weight PT bizi kal ou in the secondary display Clearing the tare weight Aa en kg G moa weight appears in the main Storing the tare weight Loading the tare weight which has been determined or which has been entered using the numeric keyboard Press the Ld command key s eee Then enter the number of the tare l memory in which you wish to store the value there are 10 tare memories 0 9 available for each connected scale Confirm your entry by pressing the T function key If necessary clear the tare after unloading the scale Recalling a tare memory value Clearing a tare memory value oT i mo Phy GL ak Weighing using the tare memory Place the filled container on the scale Then call the tare memory value If you press T function key again the tare value will be transferred to the current weighing The net value appears in the main display S 72 0 Totalling weights mode There is a totals memory available for each connected scale in weighing G OGkg NET T agaa 2Te Tare the container if necessary Place the items to be weighed on the scale Transfer the weight value to the totals memory Take the items take weighed off the scale Clear the tare if necessary If necessary enter a new tare Place the next items to be weighed on the scale Transfer the weigh2. Displaying the commission memory and the current number of the component lying on the scale By holding the K key the K gross and tare total are displayed cyclically in the secondary display po E Clear the total memory and exit the component weighing function By holding the K key the K gross and tare total are displayed cyclically in the secondary display If a printer is connected the K function key and the CI K key combination activate printing Printing will take place according to the printing format definition For more detailed information see Printing S 72 0 Switching and checking in the weighing mode Set points limit values can only be set in weighing and counting mode 3 memories for limit values are available for each connected scale Entry must be additive i e the weight of first limit value should be added to the second Limit values affect the net weight Loading memory Enter the value for the set point with the numeric keyboard Press the Ld command key followed by the number of the memory Confirm your entry by pressing the function key Memories 2 and 3 are entered and displayed in the same way Recalling of stored values Press the i command key and the number of the memory containing the value you require Confirm your entry with the 7 function key Weighing with limit values Tare the contai
3. 2761 Getting Started and Operating Instructions C S 20 470 620 022 Printed in Germany 2 1998 Subject to technical modifications S 7221 Getting started Set up the weighing platform at the place required Use the water level and the adjustable feet to ensure that the scale is positioned horizontally Fit the indicator or mount on the wall using the bracket provided Connect the device to the mains The scale is ready for use QD 097 09 002 SOEHNLE XXXX fig The order in which the scales can KA3 KA2 EM be connected L Space for fuse stamp SNR Serial number SNR l lt gt 11 Weighing range weighing ranges i kell lt l2 in the case of multi range scales jax Min Il Max Range permitted for calibrated e Min weighing SNR xxxx x xxxxx _ I Calibration value graduation SNR Serial number scales type last digits of year of manufacture number EU conformity symbol with year cc 97 applied P93 09 155 precision class no of EU admission XXXX Code of the office quoted M Sign for EU admission SS 220 Using the scales If you use the display consistently and logically you will soon discover the uni versally powerful capacity of the scales Many functions only require one push of a button memory functions are available with just a few frequently used key sequences The clearly laid out
4. 5 0 TAadd 6 2 Default weighing value 7 3 Default counting value 8 10 Ref pc 9 09600 Baudrate 10 0 Parity 11 3 7 8 Bit 12 0 CR LF 13 0 STX ETX 14 1 DIM on 15 0 Dec 16 0 EDP 17 2 Printer 18 1 Backlight on off 19 Enter Code No as described in print image definition pakey 20 dto key 21 dto CL key 22 dto K key 23 dto CLK key 24 dto EDP D 25 2 Timer 26 0 Reset Serial No 27 not relevant 28 1 Optimization of number of pieces S 72 0 Defining the print image been pressed to activate printing CAL step 19 24 The incrementing of the tens column from left to right is achieved using the 0 key as with user modifications data transfer The first programmed data block is displayed 4 digit code number after the key has Modifications with the numeric keyboard The displayed value is transferred by pressing the K key The next data block is then displayed Code of 4 positions YY x print code positioning beginning of printing Every print code requires a positioning beginning of printing The positioning has to be additive that is to say that in case of several data blocks in one line you should subtract the positioning of the blocks before Each line closes with the code 3 300 An i e line is programmed with 3 300 too This means that 3 300 always creates a new line The print image presentation is terminated by 3 400 When the values are transferred using the K
5. key the display moves forward to the next CAL step You return to tl weighing mode by pressing the x10 key ne Print Print Settings Comment code code 2 D intern PC 3 E 2 z 5 F X 2 Digit 5 3 33 lt Unit gt g kg lb oz OOXX B XX Gross weight 15 G XXXXX XX lt Unit gt 01XX D XX Date 8 XX XX XX 02XX d XX Date 1x for pressing tke key just once 03XX EXX Orga data 1 No 1 XXX max 39 pos 04XX e XX Titel Org 1 blank O5XX F XX Orga data 2 No 2 XXX max 39 pos O6XX f XX Titel Org 2 blank 07XX G XX Orga data 3 No 3 XXX max 39 pos 08XX g XX Title Org 3 blank 8 09XX XX Components 8 K XX XXXXX XX lt Unit gt 10XX XX Total components 16 K Total XXXXX XX lt Unit gt z 11XX LXX Current number 5 Current No XXXXXXX 5 12XX N XX Net weight 16 N XXXXX XX lt Unit gt a 13XX n XX Net weight total 16 N Total XXXXX XX lt Unit gt 5 14XX PXX Piece 8 PCS XXXXXXX f 15XX p XX Total number of pieces 18 Total number of pieces XXXXX XX 16XX R XX Reference weight 7 REF XXXXX XX lt Unit gt 17XX S XX Status for break over points 5 S XXXxX 18XX T XX Tare weight 5 XXXXX XX lt Unit gt 19XX U XX Time 5 XX XX 20XX u XX Time 1x 5 or pressing tke key just once 21XX XX Status for
6. keyboard is divided into blocks of keys Numerical keys Function keys Command keys Control keys MERER NNNNA kg a On Off Switch on only when the scales are not loaded After the test routine the main display is set to zero The scales are ready for use Control keys kg lb Switching between the scales Higher resolution hold down the key Zero setting Gross weight Data transmission printer EDP Switching between kg and Ib Enter organisational data Component weighing Kal Ey x Te Tare c Q o Switch 2 E 2356 ka Add HZ p Count Kal Delete input digit by digit o 4 Minus sign or hyphen when entering 5 i organisational data Z Numeric keyboard with decimal point manual entry alla g 6 763 Load values to memory E z 2 i Recall of stored values input of data 5 07 Cancel input of data clear memory The command is executed when the appropriate function key is pressed d DDDDD An acoustic signal confirms that the entry is correct Incorrect entries are indicated by means of five acoustic signals in swift sucession Please check that your entry is correct If necessary cancel the command sequence by pressing the Cl key The indicator 2761 has a wide range of memory options 10 tare memories 3 memories for organisational data 3 memories for set points or limit values in the weighing
7. Remove the items from the scale Clear the tare if necessary Determine a new tare if necessary Place he next quantity on the scale Transfer it o the totals memory etc nown quantities can be entered manually using the numeric keyboard gross tare net per scale possible Totalling items per scale or by all scales connected see user mode 1502 Enter the number of pieces Er 18 F Transfer this to the totals memory pa Display the totals memory paa Clear the totals memory Totalling weights If a printer is connected the function key and the CI key combination activate printing Printing will take place according to the printing format definition For more detailed information see Printing method Te Unknown number of pieces and item weight Determine the number of pieces without tare To determine the remaining number of pieces transfer the number of pieces to the totals memory Set the display to zero by pressing the T funktion key The removal of items is indicated by a minus sign Press the function key to determine the remaining number of pieces When you have removed more items set the display to zero etc 2Te Known number of pieces and item weight Place the filled container on the scale Enter the reference weight Enter the number of pieces using the numeric keyboard and confirm yo
8. and counting mode and in countin mode 40 reference weight memories These memory options are operated by means of the numeric keyboard manual entry and for calling the relevant memory number command keys for loading calling and deleting function keys for activating the function Loading values Loading the value which is in the secon dary display or which has been entered manually using the numeric keyboard Press the Ld command key Now enter the number of the memory in which you wish to store the value Confirm your entry by pressing the appropriate function key in this case Tare The procedure is the same for organisa tional data memory limit value memory and tare memory The reference weight memory is only available in counting mode Switch over if necessary Recall of stored value Press the i command key and the number of the memory where the value you want is stored Please note that reference weights can only be called in counting mode Confirm your entry by pressing the appropriate function key in this case the limit memory Tare memory values and in counting mode reference weight memory values are activated by pressing the function key again in this case the limit value memory Clear memory Press the Cl command key Then enter the number of the memory you want to clear Confirm your entry by pressing the appropriate function key
9. ed on the scale NET The relevant symbol goes out when the Hp aa appropriate set point limit value is reached Clearing memory Press the CI command key Now enter the number of the memory you wish to delete m Confirm your entry with the appropriate kad EJE function key Simply overwriting the memory as described under Loading the lp memory also deletes the current value Control weighing Enter the upper and lower tolerance number of pieces as in Loading memory in S1 and S2 Place the items to be counted on the scale The current number of pieces and the tendency symbol appear on the main display g B x Number of pieces is less than set value S1 p mn x Number of pieces is within the tolerance ILLI S1 S2 m x oe eet vu Zp 5 Number of pieces is higher than set value S2 SS 72 0 Counting Ade hip Switch the scale to counting mode Determining the reference weight Add GpNet Te Tare the empty container if necessary Place the number of items requested by the scale or enter the reference number i of items required by the numerical key board take over with key place p entered number of items on the scale and press the function key The average weight of one item is calculated The maximum number of pieces to be counted without error appears in the secondary display If the items are very light more will be requested The display counts backwards EEE to zero as
10. in this case Count Simply overwriting the memory as described under Loading values also deletes the current value S 72 0 T Display symbols main display KO NETG 213 5 Y PTEOAA Pic e Hee G NET T XO Zero message Standstill indication Active range in the case of multi range scales Percentage display Empty message Set points activated Gross weighing Net weighing Tare display When battery is used accessories charge level Status switching and checking Totals memory Active scale Components weighing active secondary display G 10 789 ks T 1 825 ka fad oy EF 4588 e EK 89 8 kg PTCU i350 ks We recommend optimising the reference weight within this range wait for idle indicator Gross weight Tare Reference weight Reference weight memory Set point limit value memory Memory for organisational data Weight totalled memory Quantity totalled memory Component weighed totalled memory Tare memory S c20 Weighing with tare If the tare weight is unknown Determine the tare of the empty container Scales are ready to perform net weighing If necessary clear the tare after unloading the scale If the tare weight is known Place the filled container on the scale Enter the tare weight in kg using the numeric keyboard Confirm your entry by pressing the T function key The net weight is displayed
11. ing stored data Press the Cl command key Then enter the number of the memory you want to delete Confirm your entry by pressing the Ne function key Simply overwriting the memory as described under Entry also deletes the current value Print with higher resolution for scales with internal use Parameters for printer and interface configuration data and time and much more are permanently stored in an internal memory Access to user modification is by means of the keyboard and LCD display Activating user modification CAL i Press the i key and On Off at the same time User modification functions Calibration step selection forwards Calibration step selection backwards Moving the tens column forward within a program step from left to right Moving pre assigned values forward Confirm and transfer the value of the main indicator and proceed to next CAL step Enter overwrite values date etc with the numeric keyboard Enter the digits in the flashing tens column Store changes and return to weighing mode Main display shows the CAL step and the f 7 g pre assigned value for tape printer Ca 17 PRINTER neous shows help text to CAL Step Standard settings Secondary display 1 Hour Minute Time 2 Day Month Year Date 3 0 DD MM YY 1 MM DD YY Print type 4 00050 empty message
12. ner Place the items to be weighed on the scale The relevant symbol goes out when the appropriate set point limit value reached eS Clearing memory Press the CI command key Now enter the number of the memory you wish to delete Confirm your entry with the appropriate function key Simply overwriting the memory as described under Loading the memory also deletes the current value 9B kg amp BBK 1Bekg Control weighing Enter the upper and lower tolerance weights as in Loading memory in S1 and S2 Place the items to be weighed on the scales The current weight value and the tendency symbol appear on the main display Weight is less than set value S1 Weight is within the tolerance S1 S2 Weight is greater than set value S2 S 2O Switching and checking in the counting mode Loading memory Enter number of pieces for set point with he numeric keyboard Press the Ld command key followed by the number of the memory Confirm your entry by pressing the unction key emories 2 and 3 are entered and displayed in the same way Bea ahls Aas 24E Recalling of stored values Press the i command key and the number of the memory containing the value you require Confirm your entry with the function key Counting with limit values Up ann Tare the container Place the items to be count
13. ng quantity by pressing the function key The main display returns to 0 after the T function key has been pressed Displaying the contents of the totals memory in the secondary display Clearing the totals memory Clear the tare value after removing the Cl j gt T items from the scale If a printer is connected the function key and the Cl key combination activate printing Printing will take place according to the printing format definition For more detailed information see Printing When weighing using the removal method the tare sum and the gross sum are not correct SS Z2 0 Components weighing Commissioning is only possible in weighing mode and on one set of scales OOOkg NeT 2Te Tare the container if necessary Place the items to be weighed on the scale Transfer the weight value to the component weighing memory The K mode is indicated by an arrow Place the next items to be weighed on the scale Transfer the weight value to the commission memory etc K02 K109 0kg Place the next items to be weighed on the scale Transfer the weight value to the commission memory etc 5 00 K032K114 0kg A Organisational data also with minus sign can be entered by the numeric keyboard Enter value Transfer to the component weighing memory with K K032K114 0kg pa E
14. overloading underloading and standstill 4 U XXX 22XX W XX Balance number 2 WX 23XX 0 Attribute 1 Programmation on PC only 24XX 1 Attribute 2 Programmation on PC only E 25XX 2 Attribute 3 Programmation on PC only 3 26XX 3 Attribute 4 Programmation on PC only S 27XX 4 Attribute 5 Programmation on PC only 2 28XX 5 Text 1 Programmation on PC only 29XX 6 Text 2 Programmation on PC only Sg 30XX Fi Text 3 Programmation on PC only P 31XX 8 Text 4 Programmation on PC only 5E 32XX 9 Text 5 Programmation on PC only 33XX Linefeed lt LF gt line feed OAH SEO 34XX ETX End of print format lt ETX gt end of text 03H 23 35XX bxx Total gross 16 B Total XXXXX XX lt Unit gt Se 36xx tx Total tare 16 T Total XXXXX XX lt Unit gt on 55 16 S 2 0 Malfunctions Causes and how to eliminate them Indicator Remedy DADDD An acoustic signal confirms that entry was correct Incorrect entries are indicated by 5 acoustic signals in swift succession Check that your entry is correct if necessary interrupt the command sequence by pressing C or Cl The scale sets the value zero automatically when it is switched on If the scales are outside the set tolerance range 0 is displayed Remove the items from the weighing platform Remove any dirt If the scales do not indicate zero after a couple of seconds you should contact your service partner Underload only the bottom hori
15. t value to the totals memory etc The same container must not be tared again after totalling to prevent a second totalling Value including minus values can be entered by means of the numeric keyboard Enter the value Transfer the value to the totals memory Displaying the totals memory By houlding the key the net gross tare total are displayed cyclically in the secondary display Clearing the totals memory By houlding the key the net gross tare total are displayed cyclically in the secondary display If a printer is connected the function key and the Cl key combination activate printing Printing will take place according to the printing format definition For more detailed information see Printing S 72 0 Weighing using the removal method see component weighing Place the filled container on the scale If the tare is known enter it manually if necessary and tare the weight If it is important to determine the weight of the remainder Transfer the weight value to the totals memory Press function key T The overall weight appears as the tare weight on the secondary display If parts of original number of pieces are removed this is displayed with a minus sign in the main display Determining the remaining quantity If you have transferred the overall weight to the totals memory you can determine the remaini
16. the items are placed on the Ref kdi ille scales Now press the count key again Displaying the reference weight Entering the reference weight manually in g Storing the current reference weight The reference weight can be transferred to the current counting procedure by pressing the function key a second time Counting The reference weight should be determined recalled or entered manually Place enough items to be weighed on the scale so that the required number of pieces can be met Counting with a tare weight gt e If the tare is unknown the empty container should first be tared After you have switched to the counting mode the reference weight should be determined recalled or entered manually m am pNET Now fill the Sentinel ttu The number of items will be displayed If the tare is unknown the filled container can be placed on the scales immediately after you have switched to counting mode Recall the reference weight or enter it manually Enter the tare weight using the numerical keyboard Call the tare from a tare memory and confirm it The number of items will be displayed Terminate the counting procedure S Z2 0 Totalling quantities A shared totals memory is available for all scales in counting mode 18G2 NET Determine the number of pieces Transfer this to the totals memory in the secondary display
17. tional please ask for an interface description e Signal output of the set values by means of an open100 mA 50 V collector for connection to a controller S 72 0 Product support If you have any questions about your Soehnle weighing system you should first refer to the documentation for the product If your questions are still unanswered contact your local Soehnle service partner or talk to the manufacturer directly Your Soehnle Partner Soehnle Waagen GmbH Co Customer Service Department P O Box 126 D 71535 Murrhardt Tel O 71 92 28 1 Fax 0 71 92 28 601
18. ur entry by pressing the function key Reset the display to zero by pressing the T function key then proceed as above The totals memory must be deleted after all items have been removed from the scale Clear the tare If a printer is connected the function key and the Cl key combination activate printing Printing will take place according to the printing format definition For more detailed information see Printing SS 72 0 Printing These additional operating instructions apply to the indicator 2761 if a printer is attached or if there is a connection to electronic data processing equipment Key functions Single print Print add to totals memory Print totals and clear memory Print add to component weighing memory Print totals and clear memory Elelelells Entering organisational data A 40 digit number can be assigned to each memory of the three organisational data memories Enter the data using the numeric keyboard Press the Ld command key Now enter the number of the memory where you want to store the value Confirm your entry by pressing the No unction key Recalling stored data Press the i command key and the number of the memory containing the value you want Confirm your entry by pressing the No unction key If an arrow appears the number is too long to be displayed Clear
19. zontal lines appear on the display Switch the scales off and on again The zero point will be reset automatically Overload Only the top horizontal lines appear on the display The maximum weighing range has been exceeded Remove some of the items to be weighed from the scales Weight of item too light The zero setting range has been exceeded Taring is not possible in case of over or underloaded balance Printing is not possible in case of over or underloaded balance kg Ib conversion is blocked Totals memory occupied must be cleared before commutation The connection between the reference scale and the indicator is disturbed Plug and reference scale are not identical In case of all error indications Please contact your service partner S 72 0 Technical information e The housing is made from pressure moulded powder coated aluminium RAL 9006 e Dimensions 258 x 193 x 73 mm e Protection type IP 65 dust proof and splash proof e Operated by means of a tactile keypad with acoustic acknowledgement e Mains operation with power supply unit 230 V 50 60Hz approx 20VA e Operating temperature 10 40 C e Storage temperature 40 70 C e Resetting range 1 3 of the weighing range e Resetting range at power on 5 15 of the weighing range e All data is stored securely against power failure e Serial RS232 V24 interface bi direc
Download Pdf Manuals
Related Search