Smeg AS62C Owner's Manual
Contents
1. Fluff Filter g Such fibre and lint are generally formed during wearing and washing Always clean the filter after each Drying process You can clean the filter and filter area by vacuum cleaner For filter cleaning Open the cover Remove the fluff filter by pulling it up and open the filter Clean lint fibre and the fluff by hand or with a soft piece of cloth Close the filter and place it back into its seat Sensor models equipped with a sensor There are humidity sensors in your machine that detect whether the laundry is dry or not For sensor cleaning Open the door of the machine Allow the machine to cool off if drying has been carried out Wipe the metal sensors with a Sk cloth dampened with vinegar and dry them Clean metal sensors 4 times a year Never use solvents cleaning agents or substances alike when cleaning as these might cause fire and explosion Water tank The moisture in the damp laundry is taken from the laundry and condensed Drain the water tank after each drying cycle or during drying hen Water tank warning LED comes on A Condensed water is not drinkable Never take out the water tank when the program is running Water tank may be located in two different places namely inside the drawer on the panel or inside the kick plate cover If you forget to drain the water tank your machine will stop during the following drying cycles2. if the program selection button is moved and another program mode is selected while the machine is operating You must cancel the ongoing program in order to change the drying program See Ending the program through canceling Adding removing laundry in standby mode In order to add or take out laundry after the start up of the program 1 Press the Start Pause Cancel button to switch the machine to Pause mode Drying process will stop 2 Open the door at Pause position and close it again after adding or taking out laundry 3 Press Start Pause Cancel button to start the program g Any laundry added after the drying process was started may cause the already dried clothes in the machine intermingle with wet clothes and the result will be wet laundry after the drying process is over Laundry may be added or taken out as much as desired during a drying process but as this process will interrupt drying continuously it will extend the program duration and increase energy consumption Therefore it is recommended to add laundry before the drying program is started Child proof lock There is a childproof lock to prevent any program interruption due to the pressing of keys while the program is on The loading door and all keys except the On Off key on the panel are deactivated when the child proof lock is active In order to activate the childproof lock press on the Start Pause Cancel and Low temper
3. minimum 10 cm Maximum hose and pipe lengths are given in the table below Maximum length 1 elbow 45 1 elbow 90 1 elbow 90 short 1 wall passage Each elbow and other passages should be subtracted from the above maximum length Connect the air outlet hose to the hose spacer piece by turning it anti clockwise in order to connect the ventilation hose Make the hose passages as shown below Exhaust of humid air from the dryer into the room is inconvenient Air outlet hose must be 3 EN extended directly to the outdoors There must be a small number of elbows as not to hinder air ventilation 6x aoe YU I lt TM The ventilation hose can be routed outdoors via a window or it can be connected to the air outlet in the bathroom To prevent water accumulation in the hose make sure that it is not folded on the floor A The air ventilation hose should not be connected to the chimney of a stove or a fireplace A Pay attention that the air inlet openings are unobstructed ZA Do not operate your machine at the same time with heaters such as a coal or gas stove Airflow may cause the chimney to flare up Airflow may cause the chimney to flame up Connection to a water drain for products equipped with a condenser In products equipped with a condenser unit the water accumulated during the drying cycle is collected in the water tank You should drai
4. the problem persists 12 EN
5. will be ventilation program to cool it down activated if you do not take the laundry out after the program has come to an end Clean the filter after each drying please see Filter cleaning Drain the water tank after each drying please see Water tank Technical Specifications Models Condenser Dryer with time control Height Height for built under installation cm 85 0 82 0 Width cm 59 5 Depth Depth for built under installation cm Height adjustment of feet cm Weight unpacked kg Voltage 230V 50 Hz Connected load 2200 W Fuse protection 16A This appliance s packaging material is recyclable Help recycle it and protect the environment by dropping it off in the municipal receptacles provided for this purpose Your appliance also contains a great amount of recyclable material It is marked with this label to indicate the used appliances that should not be mixed with other waste This way the appliance recycling organised by your manufacturer will be done under the best possible conditions in compliance HE with European Directive 2002 96 EC on Waste Electrical and Electronic Equipment Contact your town hall or your retailer for the used appliance collection points closest to your home We thank you doing your part to protect the environment 10 EN B Maintenance and cleaning Fluff filter Lint and fibres released from the laundry to the air during the drying cycle are collected in the
6. ature buttons simultaneously for 3 seconds childproof lock should be AIR C deactivated To deactivate the childproof lock press the same buttons for To start a new program after the program is over or to interrupt the program the ec ay One of the LEDs on the program follow up indicator starts flashing when the child proof lock is activated Ending the program through canceling The program which is selected first will keep on going even if the position of the program selection button is changed A new program can be selected and started after Program cancel is activated in order to change the drying 9 EN program End of program To cancel any selected program The Filter cleaning and Water tank warning e Press Start Pause Cancel button for about LEDs as well as the 0 warning LED on the a duration of 3 seconds The Filter cleaning program follow up indicator will light up at the and Water tank warning LEDs as well as the end of the program The door can be opened O warning LED on the program follow up and the machine becomes ready for a second indicator will light up at the end of this period cycle for reminding purposes Press the On Off button to shut down the A As the inside of the machine will be chine excessively hot when you cancel the program oj A 2 hour anti creasing program while the machine is running activate the to prevent laundry from creasing
7. blems Water tank A warning LED will light up at the end of the program or when the tank is full with water The machine stops operating when this warning LED lights up during a program running To restart the machine please drain the water in the water tank Press Start Pause Cancel button to start the program after you have emptied the water tank The warning LED goes off and the program resumes operating Starting the Program 1 Press Start Pause Cancel button to start the program 2 Start Pause Cancel button will light up to indicate that the program has started Timer follow up indicator One of the lamps is on as far as program runs ay shows the approximate remaining time LEDs on the timer follow up indicator will also flash when the child proof lock is anaes If more than one LED light up or flash concurrently it means there is malfunctioning or a failure please see Solution suggestions for problems Changing the program after the program has started You can use this feature to dry your laundry in a different program after your machine has started to run For example Press and hold the Start Pause Cancel button for about 3 seconds to select 80 minutes program instead of 60 minutes program Select the 80 minutes program by rotating the program knob Press Start Pause Cancel button to start the program g The program which is selected first will go on even
8. e not necessarily mean that the program has button for synthetics started Press Start Pause Cancel button of the machine to start the program Timer program selection Decide the appropriate time from the table below which includes drying temperature in degrees Select the desired time with the timer program selection button Extra dry Dry at high temperature only for cotton laundry Thick and multi layered laundry E g towels linens jeans are dried in a way that they do not require ironing before placing in the wardrobe Ready to Wear Normal laundry E g tablecloths underwear are dried in a way that they do not require ironing before placing in the drawers Ready to Iron Normal laundry E g Shirts dresses are dried ready to be ironed g Always select the highest temperature required for drying High temperature will ensure energy and time saving For further program details see Program Time Selection Table Main programs eAnti creasing A 2 hour anti creasing program to prevent laundry from creasing will be activated if you do not take the laundry out after the program has come to an end This program rotates the laundry in 60 second intervals to prevent creasing eVentilation Only ventilation is performed for 10 minutes without blowing hot air You can air your clothes that have been kept at closed environments for a long time thanks to this program to deodorize unpleasant odor
9. er be operated without the top trim e Place the machine on a sound floor If it is to be placed on top of a washing machine the approximate weight together may reach 180 kg when they are full e A fitting device should be used between the two machines for use on a washing machine The fitting device Part no 296 280 0100 white 296 280 0200 grey must be installed by the Authorized Service Levelling In order to ensure that your machine operates more silently and vibration free it must stand level and balanced on its feet Front feet of your machine can be adjusted Balance the machine by adjusting the feet Loosen the feet by hand Adjust them until the machine stands level and firmly Never unscrew the adjustable feet from their housings 2 plastic pieces supplied together with the Operating Instructions prevent your machine from slipping on wet and slippery surfaces Tilt your machine to backwards t install these plastic parts Fit the plastic parts to the front adjustable feet Press on the plastic parts to fix them in their places Check the balance of your machine again and readjust the adjustable feet if necessary Ventilation hose and connection for products equipped with an outlet vent Ventilation hose assures exhausting of the air from inside the machine Vented dryer has 1 air outlet Stainless sheet metal or aluminum pipes can be used instead of the hose The diameter of the pipe to be used should be
10. ess SMeGg AS 62 C 1 Warnings Please read the following information Otherwise there may be the risk of personal injury or material damage Moreover any warranty and reliability commitment will become void General Safety e Never place your machine on a carpet covered floor Otherwise lack of airflow from below of your machine may cause electrical parts to overheat This may cause problems with your machine e Your machine is designed to stop operating in the event of power resuming after a power failure You must press Start Pause Cancel button to resume the program Press the Start Pause Cancel button for 3 seconds to cancel the program See Canceling a Program e Your machine can be operated at temperatures between 5 C and 35 C First Use e Do not neglect to have the grounding installation made by a qualified electrician Our company shall not be liable for any damages that may arise when the machine is used on a line without grounding e Please call the Authorized Service to commission your machine e When operating your machine for the first time partly load it with wet pieces of clothes and let it run approximately for 15 minutes e You may smell an unpleasant odor and excessive filbre lint may accumulate during first drying cycle e For safety and performance purposes clean the filters after each drying cycle Intended use e This product has been designed for home use e The appliance may o
11. in your machine after checking the labels on your clothes Select a program with suitable low temperature for the laundry type to dry your clothes Drum lightning does not come on for models equipped with a lamp The machine might have not been started by using the On Off button Bulb may have blown Make sure that the machine is On Call the authorized service to replace the bulb Final Anti creasing LED flashes 4 The 2 hour anti creasing program to prevent laundry from creasing might have been activated Turn off the machine and take out the laundry Final Anti creasing LED is on Program has come to an end Turn off the machine and take out the laundry The Drying LED flashes A heat sensor failure has occurred Machine ends the program without heating Also for products equipped with a condenser Turn off the machine and take out the laundry Call your authorized service Water tank warning LED is on Water may be full Anti creasing program might be running Drain the water in the water tank Filter cleaning LED is on Condenser cleaning LED is on Filter might have not been cleaned Filter drawer Condenser might have not been cleaned Clean the cover filter Clean the filters in the condenser filter drawer under the kick plate A Call an authorized service if
12. istance of minimum 3 mm AXA damaged power cable must be replaced by a qualified electrician AThe appliance must not be operated unless it is repaired There is the risk of electric shock Disposal Packaging material can be dangerous to children Keep the packaging materials out of the reach of children or dispose of them accordingly Do not dispose them together with normal domestic wastes Disposing of the old machine Dispose of your old appliance in an environmental friendly manner e You may refer to your local agent or solid waste collection center in your municipality to learn how to dispose of your machine Before disposing of your old machine cut off the mains plug and make the door lock unusable so children will not be endangered g Before drying Always follow the advice on the garment labels With this dryer dry only the laundry having a label stating that they are suitable for drying in a dryer by selecting the appropriate program wa Ne rd High Normal Suitable for Do not dry temperate temperatu re drier with drier rying rying Dry ona Hang without hanger spinning Can be ironed Can be with hot iron ironed with warm iron norenttaty Do not iron e Laundry items with metal attachments such as belt buckles and metal buttons can damage your machine e Do not dry items such as woolen silk garments and nylon stockings delicate embroidered fabric
13. l down cycle of tumble dryers should be used to reduce the temperature of the items They should not be removed from the tumble dryer or piled or stacked while hot Warning Never stop tumble dryer before the end of the drying cycle unless all items are quickly removed and spread out so that the heat dissipated e ltems that have been previously cleaned in washed in soaked in or spotted with petrol gasoline dry cleaning solvents or other flammable or explosive substances should not be placed in a tumble dryer Highly flammable substances commonly used in domestic environments include acetone denatured alcohol petrol gasoline kerosene spot removers some brands turpentine waxes and wax removers e tems containing foam rubber also known as latex foam or similarly textured rubber like materials should not be dried in a tumble dryer on a heat setting Foam rubber materials can when heated produce fire by spontaneous combustion e Fabric softeners or similar products should not be used in a tumble dryer to eliminate the effects of static electricity unless this practice is specifically recommended by the manufacturer of the fabric softener or product Undergarments that contain metal reinforcements should not be placed in a tumble dryer Damage to the tumble dryer can result if metal reinforcements come loose during drying 2 EN When available a drying rack could be used for such items e Plastic a
14. n the accumulated water after each washing cycle You can directly send the accumulated water out through the water drain hose supplied with the machine instead of periodically draining the water collected in the water tank Remove the hose on the machine by pulling it out from its end in order to make the water drain hose connection Do not use any tools to take out the hose Attach the drain hose adaptor to the end of this hose Connect the special drain hose supplied with the machine to the hose adaptor fitting The other end of the drain hose can be directly connected to the wastewater drain or to the washbasin The fitting must always be secured in all types of connections When you direct the water drain out Water Tank warning LED will light up at the end of each program e The hose should be attached to a height of maximum 80 cm e You must be careful not the pinch or bend the hose Electrical connection Connect the machine to an earthed outlet protected by a fuse of suitable capacity Important e Connection should comply with national regulations e Power cord plug must be within easy reach after installation e The voltage and the allowed fuse protection are specified in the section Technical Specifications e The stated voltage must match with your mains voltage e Connection via extension cords or multi plugs should not be made e The main fuse and switches must have a contact d
15. nly be used for drying of textiles that are marked accordingly Safety instructions e Unplug the machine when it is not in use e Never wash down the appliance with water There is the risk of electric shock e Never touch the plug with wet hands Never pull from the cable to unplug the machine Do not operate the machine if the power cord or plug is damaged e Never attempt to repair the machine yourself e For malfunctions that cannot be solved by information in the operating manual Turn off and unplug the appliance and call an authorized service agent To minimize the risk of fire in a tumble dryer the following should be observed Items that have been spotted or soaked with vegetable or cooking oil constitute a fire hazard and should not be placed in a tumble dryer Oil affected items can ignite spontaneously especially when exposed to heat sources such as in a tumble dryer The items become warm Causing an oxidation reaction in the oil Oxidation creates heat If the heat cannot escape the items can become hot enough to catch fire Piling stacking or storing oil affected items can prevent heat from escaping and so create a fire hazard If it is unavoidable that fabrics that contain vegetable or cooking oil or have been contaminated by hair care products be placed in a tumble dryer they should first be washed in hot water with extra detergent this will reduce but not eliminate the hazard The coo
16. rticles such as shower caps or babies waterproof napkin covers should not be placed in a tumble dryer e Rubber backed articles clothes fitted with foam rubber pads pillows galoshes and rubber coated tennis shoes should not be placed in a tumble dryer If there are children in your house e Electrical appliances may be dangerous for the children Keep children away from the machine when it is operating Do not let them tamper with the machine e Close the loading door when you leave the area where the machine is located e This appliance is not intended for use by young children or infirm persons unless they have been adequately supervised by a responsible person to ensure that they can use the appliance safely e Young children should be supervised to ensure that they do not play with the appliance 2 Installation The proper location e Install your machine in environments which have no risk of freezing and in a stable and level position e Do not place your machine on a long pile rug or on similar surfaces e Operate your machine in a well ventilated dust free environment A Make sure that your machine is not placed on the power cable AA Place it at least 3 cm away from the edges of other furniture and the walls e A special part Part no 295 970 0100 replacing the top trim must be provided and installed by the Authorized Service in order to use the machine under a counter or in a cupboard It should nev
17. s eTimer programs You can select one of the 10 min 60 min 80 min timer programs to achieve the final drying level Dry the cotton laundry at high Program selection and consumption table Program table Capacity Spin speed in washing Approximate amount of Drying time Programs machine rpm remaining humidity minutes Cottons Coloreds Recah Wear eoat tion Synthetics f o en J 130 100 ce s 80 5060 30 wo 0 20 Delicates Energy consumption values A Energy g P g y value kWh Synthetics amp Mixed fabrics 3 50 2 00 Ready to wear Energy Label standard program EN 61121 2005 All values given in the table have been fixed according to EN 61121 2005 Standard These values may deviate from the table according to the laundry type laundry spin speed environmental conditions and voltage fluctuations Auxiliary function Low temperature This function allows for drying at lower temperatures and therefore saves energy Warning LED will light up when you select the function You must use this function when you dry your synthetic or delicate laundry Warning indicators Warning indicators may differ according to the model of your machine Filter cleaning A warning LED will light up to remind filter ganing after the program finishes If the filter cleaning warning LED lights up continuously please refer to Solution suggestions for pro
18. s garments with metal accessories and items such as sleeping bags in the machine e Garments made of delicate and valuable fabrics as well as lace curtains can be creased Do not dry these in your machine e Do not dry items made of hermetic fibers such as pillows and quilts in the drying machine e Garments made of foam or rubber may be deformed e Do not dry clothes containing rubber in the machine e Do not dry clothes exposed to petroleum oil combustible or explosive agents in the machine even if they are washed beforehand e Overly wet laundry or laundry with dripping water must not be put into the machine Preparing clothes to be dried e All laundry must be spun at the highest possible spin speed your washing machine allows for the textile type e Laundry may be tangled after washing Separate your laundry before placing them into your dryer e Sort your laundry according to their types and thicknesses Dry the same type of laundry together Following weights are given as examples Home articles Approximate weights gr 1500 Cotton quit covers single 1000 Bed sheets double 500 Bed sheets single 350 Large tablecloths 700 Small tablecloths 250 100 700 350 Cotton quit covers double Approximate weights gr 150 300 200 500 350 700 Handkerchiefs 10 pieces 100 Shirts 125 Right load c gpacity Please consider the informa
19. t have not been cleaned Clean the cover filter and Filter drawer Laundry come out wet at the end of drying Cover filter and filter drawer might have not been cleaned Excessive laundry might have been loaded in Clean the cover filter and Filter drawer Do not overload the machine Machine does not switch on or the program does not start Machine is not activated when set It might have not been plugged in The loading door may be ajar Program might have not been set or the Start Pause Cancel button might have not been pressed Childproof lock might have been activated The condenser cover on the models with a condenser might not be closed securely hai Make sure thai properly closed Make sure that the program has been set and it is not in Pause mode Deactivate the childproof lock Make sure that the condenser cover and the red lock is closed securely Make sure In the machine is plugged the loading door is Program has been interrupted without any cause AN he loading door may be ajar Electricity may be cut off Make sure tha properly closed Press Start Pause Cancel button to start the program the loading door is Laundry has shrunk become felted or deteriorated A program suitable for the laundry type might have not been used Dry only the laundry which is suitable for drying
20. tion in the Program Selection Table Always start the program in accordance with the maximum load papacy Adding laundry to the machine more than the level shown in the figure is not recommended Drying performance will degrade when the machine is overloaded Furthermore your machine and your clothes might be damaged Place your garments into the drum qe so that they will not get tangled Large pieces may bunch up during drying Stop the machine 1 2 times during drying process to separate bunched up laundry Loading door Open the loading door Place laundry items loosely into the machine Push the loading door to close Ensure that no items are caught in the door EGselecting a Program and Operating Your Machine Control panel 60 80 4 30 9100 0 Pulire filtri 1500 6 G On Off Svuotare Contenitore e i e 104 9130 i e Bassa 3 Awio 00 Temperatura Pausa Refresh A 4150 1 On Off button 2 Program selection knob 3 Start Pause Cancel button 4 Low temperature 5 Program follow up indicator 6 Filter cleaning warning LED 7 Water tank full warning LED 8 Time delay button According to your machine s model Turning the machine on temperatures and synthetic and easy care Prepare machine for program selection by laundry at low temperatures depending on the pissing the On Off button pee of the laundry i Pressing the On Off button does You must press the Low temperatur
21. when the water tank is full and the Water tank warning LED will light on If this is the case press the Start Pause Cancel button to resume the drying cycle after draining the water tank To drain the water tank Carefully remove the water tank by opening the kick plate cover pulling the drawer 1 Drain the water by opening the water tank cover 2 If there is lint accumulation in the water tank cover clean it and press to close 3 Place the water tank into its seat Condenser Hot and humid air in the condenser is cooled with the cold air from the room Thus the humid air circulating in your machine is condensed and then Eames into the tank Clean the condenser after every 20 drying cycles or once a month To clean the condenser If a drying process has been carried out open the door of the machine and wait until it cools down Unlock the 4 condenser locks after opening the kick plate Pull out the condenser Clean the condenser with pressurized water and wait until the water drains Replace the condenser with the side labeled Top facing upwards Lock the 4 condenser locks Make sure that the red lock on the upper right corner is engaged securely Close the kick plate cover Close properly and check the locking latchs 11 EN g Solution suggestions for problems Problem Cause Explanation Suggestion Drying process takes too much time Cover filter and filter drawer migh
Download Pdf Manuals
Related Search