Skyworks 32L29 User's Manual
Contents
1. Not all AV devices may be connected to TV please refer to the manual for more information when connect Use chromatic cable to connect AV device to this machine and then use audio cable to connect the audio output and input terminals D Please check the connection of all signal cables before pressing ON OFF key ic Press ON OFF key on the remote controller to power on TV Press Video Signal key on the remote controller to enter the function list and then pressAV key to select YPbPr option press OK key to confirm The surface of some AV devices is marked YPbPr or YCbCr Please refer to the manual for more information Use HDMI Cable to Connect AV Device ope O i EARPHONE S PDIF USB HDMI2 VGA AUDIO VIDEO T AUDIO KR HDMI3 75QANT HDMI 2 HDMI3 HDMI1 HDMI cable ope AV device Use HDMI cable to connect AV device to this machine Please check the connection of all signal cables before pressing ON OFF key Press ON OFF key on the remote controller to power on TV OOOO Press Video Signal key on the remote controller to enter the function list and then press Av key to select HDMI option press OK key to confirm 1 HDMI cable may transfer audio and video signals synchronously it s unnecessary to use audio cable Use VGA Connector to Connect AV Device o IDE L H AUDIO R OC a O2. kywortn LCD 32L29 User Manual of LCD Television Skyworth Thank you for your purchased of the Skyworth LCD TV product Please read a manual carefully prior to use The design and specifications are subject to change without any further notice E Introduction To ensure safety and best performance of your product this manual introduces of using setting and other important information Please read the manual carefully before using this product afety Precaution Cleaning Unplug the AC cord form the wall outlet before cleaning Do not use liquid cleaners or aerosol cleaners Use a dry cloth for cleaning Do not use corrosive cloth Do not use sharp object scratch this LCD board and shell Heatsources Do not install the product near any heat sources such as radiators heaters stoves and other heat a generating products including amplifiers Do not insert foreign objects Placing objects into the vent holes rear cabinet may cause an electric shock and electric short circuit Wall mount installation Please comply with manufacturer s instructions to install the product on the wall and ceiling installation Use only the mounting hardware recommended by the manufacturer Water and moisture Do not use the product near water such as bathtub washbasin laundry tub ina wet
3. VIDEO AUDIO R HDMI3 75QANT S VIDEO lt O Oal O oe 30 0 HDMIL HDMI2 VGA AUDIO EARPHONE S PDIF USB Audio cable PC input cable a l D Use VGA cable to connect to PC and then use audio cable to connect the audio output and input terminals D Please check the connection of all signal cables before pressing ON OFF key Press on oFF key on the remote controller to power on TV Press Video Signal key on the remote controller to enter the function list and then press AV key to select PC VGA option press OK key to confirm E Remote Controller A Power ON OFF Press this key to power on TV or enter Standby state Picture Mode Press this key to switch the picture mode 3 Sound Mode a Press this key to switch the sound mode I II When watch bilingual or stereo programe press this key to select audio language or sound output Mute Press this key to make the sound mute or restore the sound output Sleep Press this key to set up the sleep timer Aspect Ratio Press this key to select the aspect ratio of the picture Freeze Press this key to freeze the picture or restore the picture state EPG Press this key to enter the electronic programe menu Digital Keys Press the keys to select the channels Channel List Press this key to list the channel list Return Press this key to return to the previously watched ch
4. HDMI2 VGA AUDIO VIDEO L AUDIO R S VIDEO HDMI3 75QANT EARPHONE S PDIF USB AV cable Use the video cable to connect AV device to this machine 2 Please check the connection of all signal cables before pressing ON OFF key Press ON OFF key on the remote controller to power on TV Press Video Signal key on the remote controller to enter the function list and then press AV_ key to select AV option press OK key to confirm Use S Video Cable to Connect AV Device O O i lt EARPHONE S PDIF USB HDMI2 VGA AUDIO VIDEO L AUDIO R i HDMI3 75QANT S video cable Camera Game machine oo VCR ODOM a 0 Y DVD player TV box Use S video cable to connect AV device to this machine and then use audio cable to connect the audio output and input terminals 2 Please check the connection of all signal cables before pressing ON OFF key Press ON OFF key on the remote controller to power on TV Press Video Signal key on the remote controller to enter the function list and then press AV key to select S VIDEO option press OK key to confirm Use Chromatic Cable YPbPr to Connect AV Device O O EARPHONE S PDIF USB L_ AUDIO R HDMI3 miol Game machine Camera r Charomatic cable
5. Troubleshoot OK Cancel Apply Display Mode If the signal from the system is standard the screen shall make adjustment automatically If the signal is not standard please adjust according to the instructions The list of display modes is described as follow the screen has been optimal by the maker when leave the factory 640x480 60Hz 75Hz 800x600 60Hz 75Hz 60Hz 75Hz 60Hz 75Hz E Troubleshooting If you have the following troubles when use this product please use the method we tell you to solve if the trouble couldn t be solved through the following methods please contact our company or the authorized service center do not try to dismantle the product to repair by yourself or accident might occur Check the connection of power supply No sound and picture Press Power key to power on TV Check whether mute function is used Have picture but no sound Check whether the volume is 0 Check the connection of all cables Adjust the color No image or black white screen Check whether the broadcasting settings are correct Check whether the television is too close to other electronic Picture sound is disturbed product move it away or change a power socket Bititradenowecracaawithaicise Check the connection direction and position of antenna Generally it s caused by the indoor antenna Replace new batteries Remote controller fails to work Clear the up
6. and right audio AUDIO R interfaces in the back of TV and another end to the corresponded audio output interface AUDIO OUT of DTV or DVD Video Output Interface Installation and Connection Connect VHF UHF Antenna QOO0RHOO0CRDODDQ0RBDOD000000000000000000R 00000080 000080000 QOOODDDQ0CDDOR ODEO RB RODD 00000000000000RBE0 000 0000000000000 UHF VHF antenna LOUDON ANON DR DOQC ON ONDE S HOO 0008 ea 300 75 ohm adapter except m _ 300 ohm power cable Power Connection AANABAOAANOBAO OOAOAABORAOAAAOBABAAAOBAB AOABAAOOOAENAO DONDE ODO0RDO0D00NREDDD00D00 0000000000008 000000E0000000000 ETE N EATEN J J oaao oooonoog O goonnorraonooeoogpoetooot S BOnoponti otoo O10 000000000 ere i OOOO O0OCODMON i UOO DIDUD Mi po i wan nnd nt mi Press ON OF key on the remote controller to power on TV or enter Standby state Please disconnect the power when the TV is going not to use for a long time Pressing ON OFF key to power on TV or enter Standby state can not cut off the power supply Please pull out the power plug if need to cut of the power Use Video Cable to Connect AV Device O O OC T 3
7. E 2 m Rear Connection Diagram 3 Installation and Connection 4 E RONO O ONTONGE Sairi erat ese nee a epee eos 10 m Batteries Installation esses ee 11 EPower ON OPP esses eee agence eee ea ere 11 E Standby MOda ase 11 Picture Setting 2 Sound Setting 13 Channel Sein 2 lt lt se5 lt 4h esate sence senna geen sede 14 Time Setting See eee ees a See ee eee ee ees 14 Option Setting 16 PO ONG akan ne ae E eee eee ee eee eee 17 Mista Soni a sess 8 ee ee oe ee se oaeeee 17 Display Mode 17 TFOUDIE SOONG amane E eee eae eee 18 Technical Specifications E 52 Wide Screen LOD TV Sea ee 19 E Basic Operations User Manual AV Cable ONIN oo o AV AL JOOOCOCOO aD ND 1 Press this key to power on TV or enter standby state 2 Video Signal Video input mode DTV TV Component PC HDMI1 HDMI2 HDMI3 Video1 Video2 S Video 3 Menu Display the main menu on the screen 4 Volume Adjust the volume 5 Channel Select TV channels 6 Power Indicator The indica
8. andard and Low The user may set up PC menu after select and enter PC signal 1 Press Menu key to enter OSD menu and then press key to select Picture option 2 Press A V key to select the Screen Setting 3 Press key to adjust the function 4 Press Menu key to return to the previous menu 5 Refer to the manual if necessary Auto Adjust press key on the remote controller to adjust the horizontal position vertical position to make the picture get the best display Horizontal Position adjust the horizontal position of the PC screen Vertical Position adjust the vertical position of the PC screen Size adjust the size of the screen Phase adjust the phase of pixels to avoid interruption when need E Sound Setting Bouna The user may customize different sound modes to realize the best sound effect 1 Press Menu key to enter OSD menu and then press key to select Sound option 2 Press A V key to select the option 3 Press key to adjust the function 4 Press Menu key to return to the previous menu Sound Mode press key to select five modes are available including user movie music standard and sport Balance adjust the balance of sound Auto volume if this function is used when the user powers on TV set it shall adjust the volume to the level of last watch automatically This function may be set as ON or OFF Surround Sound press this op
9. annel 43 Color Keys Press the keys to operate MHEGS Programe Press this key to select TV channel Volume Press this key to adjust the volume Menu Press this key to display the current menu Information Press this key to display the information of the current programe such as programe number name and sound system OK Press this key to confirm the selection Up Down Left Right Signal Source Press this key to select the signal source Exit Press this key to exit the menu Favorite Press this key to watch the favorite programes 3 DTV RADIO Press this key to switch between DTV and Radio signals 4 DTV Subtitle ri0 Press this key to select DTV subtitle te Controller O POWER P M S M I II MUTE SLEEP ASPECT FREEZE EPG 9O OOO QO Of ery Installation 1 Open the battery cover 2 Load two AAA batteries according to the indications 3 Move back the cover and lock C3 Note please take out the batteries if the controller is going not to use for along time ver ON OFF Power ON Press Power key on the panel or remote controller to power on TV set Standby Mode It may reduce the power consumption in Standby mode This mode is very useful when you want to leave and suspend TV set have dinner 1 Press Power key Note TV set is turned off and LED lamp turns red 2 Further press Power key to restore CF Note it s advised not to k
10. basement and swimming pool etc Electrical source Do not connect too many electrical items to the same socket outlet it may cause in fire or electric shock Servicing Do not attempt to repair the product yourself Removing covers can expose you to high voltage and other dangerous conditions Request our qualified repairer to perform servicing Product protection To prevent damage due to lightning storm please unplug it from the wall outlet and disconnect the antenna or cable system Wire protection Please protect the electrical wire and do not stomp twist and squeeze it Careful to inspect the plug and electrical wire Earthing device Make sure connect the earth wire to prevent possible electric shock If grounding methods are not possible have a qualified electrician install a separate circuit breaker To avoid still picture for along time Do not display a still picture for a long time this may cause an afterimage to remain Suggestion Do not still picture exceeding half hour this may cause an afterimage Do not still picture for a long time when play the TV game or see a movies Please reduce the brightness and contrast ratio before still picture The warranty service doses not contain the problem of afterimage Contents Connection and Basic Operations m Standard Accessories 2 a serserie miencsnsien
11. ccording to the living habit 1 Press Menu key to enter OSD menu and then press key to select Time option eae 2 Press A V key to select the option 3 Press key to adjust the function amp 4 Press Menu key to return to the previous 4 menu Clock Sleep Timer press key to select the ot On Time following options are available including OFF Sleep Timer 10min 20min 30min 60min 90min 120min 180min and 240min Slock 1 Press Menu key to enter OSD menu and then press key to select Time option 2 Press A V key to select Clock option and press OK key to enter and then press A V key to select the option 3 Press key to set up 4 Press Menu key to return to the previous menu Close 1 Press Menu key to enter OSD menu and then press key to select Time option 2 Press A V key to select Close option and press OK key to enter and then press A v key to select the option 3 Press key to set up 4 Press Menu key to return to the previous menu LON Time 1 Press Menu key to enter OSD menu and then press key to select Time option 2 Press A V key to select ON Time option and press OK key to enter and then press A v key to select the option 3 Press key to set up 4 Press Menu key to return to the previous menu Date Month Year Hour Minute Repeat Hour Minute Activate Hour Minute V
12. eep TV in standby mode for too long time if you go out for a holiday please pull out the power plug and antenna ft Picture Pictur The functions are to adjust the picture quality 1 Press Menu key to enter OSD menu and then press key to select Picture option 2 Press A V key to select the option R mM 3 Press key to adjust the function 2 Ca 4 Press Menu key to return to the previous menu Picture MORS Stand T E T T T Contrast 1 Picture Mode press key to select picture Brightness mode four options are available including standard mild user and dynamic Color 2 Contrast adjust the brightness of the bright part Sharpness but keep the deep color Tint 3 Brightness adjust the brightness of the picture 4 Color adjust the saturation 5 Sharpness adjust the sharpness of some details 6 Tint adjust the tint of the picture 7 Color Temperature select the color temperature as you like User the user may customize the color temperature Medium keep the original white PICTURE Warm red Cold blue Color Temperature Medium CF Note in Customize mode the change will be stored automatically Aspect Ratio 8 Aspect Ratio press key to select five modes are available including 16 9 Zoom1 Noise Reduction Zoom2 Out and 4 3 9 Noise Reduction press key to select five 4 modes are available including OFF Auto High EXIT MENU OK S St
13. olume Mode 1 Press Menu key to enter OSD menu and then press key to select Option 2 Press A V key to select the option 3 Press key to adjust the function 4 Press Menu key to return to the previous menu Language press key to select the language OSD Time Out the following options are available including OFF 10s 15s 30s 45s and 60s OSD Transparency adjust the brightness of OSD menu background OFF 25 50 75 and 100 Restore Factory Default restore the defaulted value of the television Software Update update the software inside OPTION Language English ONDE Miril melen Off OSD Transparency Off Restore Factory Default Software Update Os a PC Setting Software Windows XP The picture below describes the typical PC display settings The actual screen operation may vary with different Windows systems or displays however the basic installation is same 1 Click Start button to select and enter Control Panel DAE iE 2 Click Display option on the control panel to pop up a Themes Desktop Screen Saver Appearance Settings dialog window 3 Click Setting option at the upper side of the dialog window Advised resolution 1360 768 Sad Display Default Monitor on NVIDIA GeForce Fx5200 Screen resolution Color quality Less g More Highest 32 bit E E E
14. per edge of the controller IR receiving window Check whether the batteries are installed correctly Check whether the signal cable is connected to PC In PC mode display NO SIGNAL Check whether the PC is powered on Check the maximum resolution and field frequency of the Bi MOE epee ee video card and then make comparison with the display mode E Technical Specifications lide Screen LCD TV E Standby Power 3 Connection S VIDEO AV IN YPbPr AV OUT RCA type x1 ATV DTV AV S VIDEO USB1 USB2 Version2 0 For software update 4 Compatibility 480p 480i 576i 576p 720p 1080i 1080p 8 Net Weight 9 Working Temperature 5 C 35 C 10 Working Humidity 20 80 11 Storage Temperature 15 C 45 C 12 Storage Humidity 10 80 Note do NOT dispose the used electronic product together with the household refuses it should be disposed at the designated place please consult the environment protection bureau or local dealer for details Refer to the Disposal Ordinance of the Used Electronic Products
15. tion to enter to set ON OFF SPDIF Output press J key to select three modes area available including PCM AC3 and OFF only for digital television in HDMI state amp OS Auto Adjust Horizontal Pos Vertical Pos Size Phase MENU SOUND Sound Mode 1 Standard Balance Auto Volume Surround Sound SPDIF Output Channel Setting levision o A CHANNEL 1 Press Menu key to enter OSD menu and then Auto Tuning press key to select Channel Setting option DIRAE A 2 Press A V key to select the option ATV Manual Tuning 3 Press key to adjust the function i 4 Press Menu key to return to the previous menu Programei Auto Tuning EXIT MENU Q Tune and memorize the local channels subject to the actual conditions of the place and then automatically distribute the channels some of them are not in compliance with the user s requirements however the user may cancel them through manual tuning Programe Edit Qp DTV Manual Tuning ATV Manual Tuning es The television shall display the frequencies of all channels and the user may manually tune them Programe Edit enter the interface of programe edit Press the red green yellow blue key to make the corresponding settings press OK key to confirm 0000 Press Menu key to return to the previous menu i Time Setting The user may set up the time in this interface And set up ON OFF time a
16. tor turns red when the TV is in standby mode 7 Remote Control Sensor Receive signal from the remote controller 8 Sound Speaker yonnection Diagram EARPHONE S PDIF HDMI3 75QANT bg Head Phone Output Interface Coaxial Output Interface S PDIF 3 USB Interface for software update OLOKO HDMI 1 HDMI 2 HDMI3 Support to connect HDMI output devices STB DVD Player AV device and Digital TV HDMI connects with HDMI video and audio signal are transmitted by one cable PC Audio Input Interface VGA AUDIO Connect one end of the stereo audio cable into the plug of personal computer audio output VGAAUDIO at the back of TV Connect to PC Connect this VGA interface to the VGA interface of personal computer Video Output Interface S Video Output Interface S Video Videoi and YPBPR use the same group audio interface Connect with Antenna and Cable TV Network To correct watch TV channels it must receive signals with one of the bellow signal source outdoor antenna cable TV broadcast satellite broadcast YPBPR Make up Equipment Connection Connect an end of component to an interface of the back of TV Y Pb Pr and another end to the corresponded output interface of component video of DVD Combine YPBPR of the equipment DTV or DVD AV connector or marked as Y B Y R Y or Y Cb Cr Connect RCA audio to left audio AUDIO L
Download Pdf Manuals
Related Search