Shark NV356E User's Manual
Contents
1. Your new Shark Navigator Lift Away Pro vacuum cleaner can easily be configured into different cleaning modes to meet all your cleaning needs upright vacuum and portable Lift Away both with constant suction power Fig 8 R Z Z MODES 1 UPRIGHT VAC 2 PORTABLE LIFT AWAY Upright vacuuming floors and carpets Fig 7 Take the Lift Away with you around the house to clean hard to reach places Fig 8 www sharkclean com 7 NV355_NV356E_NV356K_NV357_NV355CS_NV356KCS_IB_E K981 1_4 indd 7 11 08 11 12 46 PM Mode 1 Upright Vac Ad To reduce the risk of electric shock unplug the unit before assembling adding or removing attachments or converting modes AX WARNING The On Off switch is on the top of the Lift Away canister Always ensure the power is OFF O position before plugging and unplugging R Upper Cord e Storage Wrap 1 Fig 11 TO ASSEMBLE 5 Push the handle b onto the top of the extension wand until you hear it click into place Fig 11 6 Insert the end of the stretch hose c into the connector on the back of the Lift Away canister Fig 11 1 Place the floor nozzle on a level surface 2 Align the tube of the floor nozzle with the tube on the Lift Away canister and lower until you hear the two pieces click into place Fig 9 7 Store the dusting brush d and the crevice tool e on the mounts of the accessory h2. DO NOT pull cord around sharp corners The use of an extension cord is not recommended e mo ND 0 DO NOT leave appliance when plugged in 1 Keep cord away from heated surfaces 2 Turn off all controls before plugging or A WARNING To reduce the risk of unplugging vacuum cleaner electric shock or injury do not use 3 Always turn off this appliance before connecting outdoors or on wet surfaces or disconnecting motorized nozzle 4 Store your appliance with the power cord secured around the two cord holders as shown in the storage instructions 2 TOLL FREE 1 800 798 7398 NV355_NV356E_NV356K_NV357_NV355CS_NV356KCS_IB_E K981 1_4 indd 2 11 08 11 12 46 PM HOSE ATTACHMENTS 1 DO NOT use if air flow is restricted if the air paths the hose or the accessories become blocked turn the vacuum cleaner off Remove all obstructions before you turn on the unit again Keep the end of the hose and accessory openings away from face and body Keep cleaning tools and hose suction openings away from hair face fingers uncovered feet or loose clothing Only use manufacturer s recommended attachments GENERAL USE Use only as described in this manual DO NOT put any objects into openings DO NOT use with any opening blocked keep free of dust lint hair and anything that may reduce air flow Keep your work area well lit Keep the vacuum moving over the carpet surface at all times to avoid dam
3. Detach the stretch hose from the back of the portable Lift Away canister by squeezing the tabs together and pulling up Fig 33 Straighten out the hose and look inside for blockages PART PART NO e Remove the dust cup and extension wand and 1 Pre Motor Filter Set XFF350 separate the portable Lift Away canister i from the motorized floor brush Look in all 4 2 HEPA Filter XHF350 openings for any blockages Fig 34 3 Dusting Brush amp Crevice Tool 112FFJ 5 Motorized Floor Brush 4 Turbo Brush 119FFJC Side suction models 5 Turbo Brush 137FFJ e Detach the hose on the motorized floor brush 6 24 Crevice Tool 1124 FC at the top by squeezing the tabs together and pulling out and at the bottom by pulling out 7 _Pet Upholstery Tool 128FF the connector Inspect inside the 3 holes 8 Dust Away Hard Floor Attachment 142FF Fig 35 i 9 Dust Away Micro fiber Pad 1 P200W Center Sichon models Dust Away Micro fiber Pads 2 XPD356 e Turn motorized floor brush over and detach Dust Away Micro fiber Pads 3 XTW356 To order additional parts or accessories go to www sharkclean com or call 1 800 798 7398 NV355_NV356E_NV356K_NV357_NV355CS_NV356KCS_IB_E 49811_4 indd 17 www sharkclean com ila 11 08 11 12 47 PM Troubleshooting Guide PROBLEM POSSIBLE REASONS amp SOLUTIONS Check filters to see if they need cleaning Follow instructions for rinsing and drying the filters before re inserting back into the vacuum See
4. coil the power cord loosely around A Reassemble all parts securely before operating the two clips Clip the plug onto the cord to vacuum secure Fig 20 2 Abo not operate the vacuum without the pre motor filters and dust cup in place Apo not operate the vacuum with WET filters 3 Store the dusting brush and the crevice tool on the mounts on the accessory holder 4 Store your vacuum cleaner safely in a cool dry area where it will not be a hazard will not get A IMPORTANT Make sure all filters are completely damaged and dry before inserting back into vacuum wilngt cause damage to anyon or anything A WARNING Never insert sharp objects into any NOTE Empty dust cup after cleaning and prior opening to clear an obstruction to storing See Maintenance section for A instructions IMPORTANT Damages caused while clearing or attempting to clear blockages are not covered under your product s limited warranty www sharkclean com 18 NV355_NV356E_NV356K_NV357_NV355CS_NV356KCS_IB_E K981 1_4 indd 13 11 08 11 12 46 PM Maintenance COMPONENT MAINTENANCE SCHEDULE 1 Dust Cup Empty each time you vacuum 2 Pre Motor Foam Filter Rinse and air dry every 3 months under normal use 3 Pre Motor Felt Filter 4 Post Motor HEPA Filter Rinse and air dry every 3 months under normal use Clean once every 2 years or as needed IMPORTANT Loss of Suction may occur if foam filters are not cleaned every 3
5. floor attachment onto he end of the extension wand Fig 19 3 Press the On Off switch to the I position to urn the suction motor on and begin cleaning all hard surfaces AQ IMPORTANT Do not use to clean damp floors or i wet sticky messes 2 Replace the canister back onto the motorized floor brush and re insert the handle with extension wand back into the top of the vacuum body until TO REPLACE THE MOTORIZED FLOOR BRUSH FOR UPRIGHT CLEANING 1 Press the red release at the bottom of the extension wand and remove the hard floor attachment CARE FOR PADS 1 Wash the pads separately with warm water you hear these click into place either in the washing machine or by hand When attaching the motorized floor brush ensure using liquid detergent that the locking mechanism is fully locked in place to ensure electrical connection has been made 12 RP TOLL FREE 1 800 798 7398 NV365_NV356E_NV356K_NV357_NV355CS_NV356KCS_IB_E K981 1_4 indd 12 11 08 11 12 46 PM Storage and Maintenance Quick r Cord Release a O Lower Cord Storage Cli IE lt 5 STORE YOUR VACUUM SAFELY d To reduce the risk of electric shock unplug the unit 1 Convert your vacuum back to upright vac mode before performing any cleaning maintenance or 2 Rotate the upper quick cord release to its upright troubleshooting checks position and
6. large particles then re usable micro fiber pad traps extra D fine dirt and dust for a superior bare floor clean Fig 1 Use only in Portable Lift Away mode CREVICE TOOL Reach deep into narrow spaces and clean between FIRST THING S FIRST YOU NEED TO KNOW cushions under radiators and baseboards and in WHAT S IN THE BOX You JUST OPENED hard to reach crevices and corners Fig 2 a Handle with Stretch Hose DUSTING BRUSH b Accessory Holder Dust shelves lamp shades window blinds books c Extension Wand furniture and other upholstered household items d Portable Lift Away Fig 3 e Motorized Floor Brush ACCESSORY HOLDER f Crevice Tool Designed to hold the crevice tool and dusting brush g 24 Crevice Tool NV356E NV356K amp NV356KCS only For quick access to tools when vacuuming and h Dusting Brush cleaning around the house Fig 4 i Pet Powerbrush PET UPHOLSTERY TOOL j Dust Away Hard Floor Attachment Removes pet hair and dust from curtains and k Dusting Pad delicate fabrics Fig 5 NV356K amp NV356KCS only Pet Upholstery Tool NV356K amp NV356KCS only PET POWER BRUSH NOTE Motorized floor brush may differ from what is This unique tool was engineered for fast and shown in the illustration above easy removal of pet hair and ground in dirt from carpeted stairs and upholstery Fig 6 6 TOLL FREE 1 800 798 7398 NV365_NV356E_NV356K_NV357_NV355CS_NV356KCS_IB_E 6981 1_4 indd 6 11 08 11 12 46 PM
7. models NV355 amp NV355CS only 1 Slide the locking latch a forward and tilt the bottom cover upward to remove Fig 28 2 Carefully remove any blockage or debris and cut away any build up of hair or string wrapped around the rotating bristle brush with scissors 3 To reassemble insert the tabs on the front edge of the bottom cover into the matching holes in the top half and tilt it back down until it clicks into place Fig 29 CLEANING THE POWER BRUSH models NV356E NV356K NV356KCS NV357 only 1 Slide the locking latch a forward and gently tilt brush housing upward to open Fig 30 IMPORTANT DO NOT force it will not open all the way 2 Carefully remove any blockage or debris Turn the power brush over to inspect the rotating brush and cut away any build up of hair or string wrapped around the rotating bristle brush with scissors Fig 31 4 Push the housing back down and slide the locking latch backward to lock www sharkclean com 15 11 08 11 12 46 PM Maintenance cont d Rotating Brush Fig 32 CLEANING THE MOTORIZED FLOOR BRUSH CHECKING FOR BLOCKAGES When your motorized floor brush needs cleaning or Blockages may cause your vacuum to overheat and locks onto an object it automatically shuts down to shut down To prevent this from happening check prevent damage to your lifetime belt The indicator potential blockage areas after heavy use or if you light will illum
8. months Rinse and allow to air dry completely Foam filters may appear dirty after use this is normal Pre Motor Foam Filter Felt Filter Filter Post Motor HEPA Filter Fig 23 EMPTYING THE DUST CUP CLEANING THE PRE MOTOR FILTERS The dust cup needs to be emptied each time you 1 Remove the dust cup vacuum and periodically during cleaning when the 2 Pull the 2 filters out from the top of the motor dust cup appears full base Fig 24 1 Undo the latches on the sides of the dust cup by lifting them up and outwards to remove the dust cup from the motor base Fig 21 w Rinse the filters thoroughly in lukewarm water until the water runs clear 2 Hold the dust cup over a trash receptacle and Apo not put the filter in the washing machine or press the bottom door release button Fig 22 dishwasher Tap gently to empty contents Press the door shut NOTE The material in the filter will discolor over again until it clicks time This is NORMAL and will not affect the 3 If needed turn the dust cup upside down over the performance of the filter trash receptacle and press the top door release 4 Squeeze out excess water and let air dry for at button Fig 23 Tap gently to remove contents least 24 hours before replacing Do not use a hair Use a dry cloth or paper towel to remove debris iver or other heating methods toidry stuck to the screen filter inside the dust cup Press 5 Place the felt filter in first
9. the suction release on the handle Open the valve a by rotating the collar 90 counterclockwise for low suction when doing light jobs such as drapes or fine surfaces Close the valve a by rotating the collar clockwise 90 for high suction and when using the hand held power brush Fig 17 a www sharkclean com 11 NV355_NV356E_NV356K_NV357_NV355CS_NV356KCS_IB_E 4981 1_4 indd 11 11 08 11 12 46 PM Dust Away Hard Floor Attachment Use and Care IMPORTANT Use only in Portable Lift Away mode ATTACH PAD 2 Do not use bleach or fabric softeners as they may damage or leave a coating that will reduce the Slip two of the tabs between the suction nozzle 3 cleaning performance of the pads and the Dust Away base and attach them to he front fasteners on the base Then pull the 3 Tumble dry low or line dry to extend the life of the other two tabs tightly around to the back fasteners micro fiber fabric on the base For best results ensure that the pad REPLACE PADS is flat against the bottom surface and secured ightly Fig 18 1 For best floor cleaning results we recommend replacing your micro fiber pads every 3 4 months CLEAN THE FLOOR following normal use 1 Press the extension wand release button and pull 2 You can find and purchase replacement he extension wand up Refer to page 10 micro fiber dusting pads and accessories Fig 15 b at www sharkclean com 2 Attach Dust Away hard
10. Maintenance sections for instructions Dust cup may be full empty dust cup Check hose and hose connections for blockages clear blockages if required If dust cup is empty and attachment inlets are clear check for other blockages See Checking for Blockages for instructions Vacuum is not picking up dirt Suction is powerful Take care when vacuuming scatter type rugs or rugs with Vacuum lifts scatter rugs delicately sewn edges Open the suction release on the handle to decrease lightweight movable suction power rugs Move the On Off switch to Suction Only position to disengage the brush roll Check filters to see if they need cleaning Follow instructions for rinsing and drying the filters before re inserting back into the vacuum Dust cup may be full empty dust cup Airflow is restricted No Check hose hose connections nozzles and accessories for blockages clear suction or light suction blockages if required Close the suction release on the handle to increase suction power If dust cup is empty and attachment inlets are clear check for other blockages Immediately turn off and unplug vacuum disconnect the nozzle and remove blockage before reconnecting and turning vacuum back on Brush roll does not spin Pull the handle toward you and release the floor nozzle to disengage the auto off feature Move the On Off switch to the II Brush Roll On position This vacuum cleaner i
11. Shark WWwW SHARKCLEAN COM NV355 Series Owner s Guide NV355_NV356E_NV356K_NV357_NV355CS_NV356KCS_IB EAR 811_4 indd 1 11 08 11 12 46 PM IMPORTANT SAFETY INSTRUCTIONS For Household Use Only WHEN USING AN ELECTRICAL WARNING APPLIANCE BASIC SAFETY PRECAUTIONS TO REDUCE THE RISK OF FIRE ELECTRIC SHOULD ALWAYS BE OBSERVED SHOCK OR INJURY INCLUDING THE FOLLOWING READ ALL INSTRUCTIONS BEFORE USING SENERA ESES TUGAL SAREL YOUR SHARK NAVIGATOR 1 Unplug from electrical outlet when not in use LIFT AWAY PRO and before servicing 2 DO NOT use vacuum with a damaged cord POLARIZED PLUG or plug If appliance is not working as it To reduce the risk of electric shock this appliance should has been dropped damaged left has a polarized plug one blade is wider than the outdoors or dropped into water return it to EURO PRO Operating LLC for examination other As a safety feature this plug will fit into fenai ot adjustn n a polarized outlet only one way If the plug does not fit fully into the outlet reverse the plug If it DONOT pull orcarny Vacuurmbytheicord still does not fit contact a qualified electrician 4 DO bk sae by eee cord to unplug DO NOT force into outlet or try to grasp Ric Nar eOb ie cae modify to fit 5 DO NOT handle plug or appliance with wet hands DO NOT run the vacuum over the power cord DO NOT use the cord as a handle DO NOT close a door on the cord
12. aging the carpet fibers DO NOT place vacuum on unstable surfaces such as chairs or tables DO NOT allow young children to operate the vacuum or use as a toy Close attention is necessary when used by or near children DO NOT use vacuum cleaner if it has been dropped damaged left outdoors or submerged in water Return to EURO PRO Operating LLC for examination repair or adjustment DO NOT use without dust cup and or filters in place DUST CUP FILTERS ACCESSORIES Before turning on the vacuum 1 Make sure that all filters are thoroughly dry after routine cleaning 2 Make sure that dust cup and all filters are in place after routine maintenance Make sure accessories are free of blockages Only use filters and accessories provided by EURO PRO Operating LLC Failure to do so will void the warranty GENERAL CLEANING DO NOT pick up large sized objects DO NOT pick up hard or sharp objects such as glass nails screws or coins that could damage the vacuum cleaner DO NOT pick up smoking or burning objects such as hot coals cigarette butts or matches DO NOT pick up flammable or combustible materials such as lighter fluid gasoline or kerosene or use vacuum in areas where they may be present DO NOT pick up toxic solutions such as chlorine bleach ammonia or drain cleaner DO NOT use in an enclosed space where vapors are present from paint paint thinner moth proofing substances f
13. by rotating the collar 90 counterclockwise to open the valve Rotate the collar clockwise to close the valve when you need high suction and for vacuuming floors 3 Press the On Off switch a to the I position to vacuum bare floors straight suction only or to the II position to engage the motorized floor brush for vacuuming carpets and rugs Fig 12 A IMPORTANT The motorized brush indicator light b will illuminate green when motorized floor brush is on or red if there is a blockage or jam Fig 12 This feature is designed to protect your 7 When you are finished vacuuming turn the Lifetime Belt that powers your motorized floor vacuum off brush See Checking for Blockages on page 15 6 Empty dust cup after vacuuming and periodically during use when it appears full See Maintenance section for instructions www sharkclean com 9 NV385_NV356E_NV356K_NV357_NV355CS_NV356KCS_IB_E K981 1_4 indd 9 11 08 11 12 46 PM Mode 2 Portable Lift Away X You can carry your vacuum cleaner in both modes by the carry handle located on top of the dust cup WY O o a d Z SSA BZ 2 Fig 14 Fig 16 PORTABLE LIFT AWAY 3 Attach desired accessory onto the end of either 1 Separate the portable Lift Away canister from the extension wand or the handle the floor nozzle by pressing the red release 4 Press the On Off switch to the I position t
14. cific obligations expressly assumed by it under the terms of this Limited Warranty In no event is EURO PRO Operating LLC liable for incidental or consequential damages to anyone of any nature whatsoever Some states do not permit the exclusion or limitation of incidental or consequential damages so the above may not apply to you This Limited Warranty gives you specific legal rights and you may also have other rights which vary from state to state Or province to province IMPORTANT Carefully pack item to avoid damage in shipping Be sure to include proof of purchase date and to attach a tag to item before packing including your name complete address and phone number with a note giving purchase information model number and what you believe is the problem with the item We recommend you insure the package as damage in shipping is not covered by your warranty Mark the outside of your package ATTENTION CUSTOMER SERVICE We are constantly striving to improve our products therefore the specifications contained herein are subject to change without notice Product Registration Please visit www sharkclean com or call 1 800 798 7398 to register your new Shark product within ten 10 days of purchase You will be asked to provide the store name date of purchase and model number along with your name and address The registration will enable us to contact you in the unlikely event of a product safety notification By registering you ackno
15. d with or used for commercial purposes This Limited Warranty does not cover damage caused by misuse abuse negligent handling or damage due to faulty packaging or mishandling in transit This Limited Warranty does not cover damage or defects caused by or resulting from damages from shipping or repairs service or alteration o the product or any of its parts which have been performed by a repair person not authorized by EURO PRO Operating LLC If your appliance fails to operate properly while in use under normal household conditions within the warranty period you may return the complete appliance and accessories with proof of purchase and date freight prepaid For customer service support call 1 800 798 7398 or visit our website at www sharkclean com If the appliance is found by EURO PRO Operating LLC to be defective in EURO PRO Operating LLC s sole discretion we will repair or replace it free of charge Proof of purchase date and a check made payable to EURO PRO Operating LLC in the amount of 19 95 to cover the cost of return shipping and handling must be included Non durable parts including without limitation filters brushes and electrical parts which normally require replacement are specifically excluded from warranty This Limited Warranty is extended to the original purchaser of the unit and excludes all other legal implied and or conventional warranties The responsibility of EURO PRO Operating LLC if any is limited to the spe
16. inate red warning you to turn off the detect a loss of suction or poor cleaning performance vacuum and clear blockage immediately The light will 1 Dust Cup reset itself once blockage has been cleared and power has been cycled on off or vacuum has been locked in Dust cup may be full Empty dust cup the upright position 2 Pre Motor amp Post Motor Filters 1 Detach the motorized floor brush from the portable e Pre motor filters require washing every 3 Lift Away canister months for optimum performance The post motor HEPA filter needs to be washed 2 Inspect the opening underneath and the rotating every 2 years brush If a build up of debris is present remove it Carefully cut anything wound around the rotating e Ensure that all the filters are clean brush with scissors Avoid damaging or cutting the 3 A bristles Fig 32 ccessories e Check intake openings C Make sure you are working in a well Extension Wand lit area and use a flashlight to help Dusting Brush search for blockages Crevice Tool Turbo Brush 16 TOLL FREE 1 800 798 7398 NV365_NV356E_NV356K_NV357_NV355CS_NV356KCS_IB_E K981 1_4 indd 16 11 08 11 12 47 PM Maintenance cont d Ordering Parts tC G7 the hose by squeezing the tabs together and pulling it out Straighten out the hose and inspect the inside for any blockages Fig 36 2 2 3 4 5 6 4 Hose and Connections to Vacuum e
17. lammable dust or other explosive or toxic materials DO NOT vacuum up any liquids DO NOT immerse vacuum cleaner in water or other liquids DO NOT use outdoors or on wet surfaces use only on dry surfaces 10 Use extra care when cleaning on stairs SAVE THESE INSTRUCTIONS NV355_NV356E_NV356K_NV357_NV355CS_NV356KCS_IB_E 49811_4 indd 3 www sharkclean com 3 11 08 11 12 46 PM This manual covers model numbers NV355 NV356E NV356K NV357 NV355CS NV356KCS TECHNICAL SPECIFICATIONS Voltage 120V 60Hz Watts 1200W Amps 10A 4 TOLL FREE 1 800 798 7398 NV355_NV356E_NV356K_NV357_NV355CS_NV356KCS_IB_E ape 1_4 indd 4 11 08 11 12 46 PM Contents Thank you for Getting Started 6 purchasing Mode 1 Upright Vac 8 the Shark Mode 2 Portable Lift Away 10 Navigator Lift Away Above Floor Cleaning 11 Pro Dust Away Hard Floor Attachment Use amp Care 12 Storage and Maintenance 13 Maintenance 14 Emptying the Dust Cup 14 Cleaning the Pre Motor Filters 14 Cleaning the Post Motor HEPA Filter 15 Cleaning the Power Brush 15 Cleaning the Motorized Floor Brush 16 Checking for Blockages 16 Ordering Parts 17 Troubleshooting Guide 18 Warranty 19 www sharkclean com 5 NV355_NV356E_NV356K_NV357_NV355CS_NV356KCS_IB_E K981 1_4 indd 5 11 08 11 12 46 PM Getting Started Fig 5 ACCESSORIES DUST AWAY HARD FLOOR ATTACHMENT Specialized hard floor attachment vacuums up
18. o button a on the side of the canister Gently turn the vacuum on for above floor cleaning and hold the nozzle to the floor with your foot and hold the handle in one hand while you carry the pull the canister up Fig 14 portable Lift Away around the house with the 2 Press the handle release button a and pull the oiher hand Fig 16 handle up or press the extension wand release button b and pull the extension wand up Fig 15 10 TOLL FREE 1 800 798 7398 NV365_NV356E_NV356K_NV357_NV355CS_NV356KCS_IB_E K981 1_4 indd 10 11 08 11 12 46 PM Above Floor Cleaning C Release suction when dusting delicate objects furniture or draperies Fig 17 Suction Release Collar CLEAN ABOVE THE FLOOR IN UPRIGHT VAC OR 4 Press the On Off switch to the I position to turn PORTABLE LIFT AWAY MODE the vacuum on for above floor cleaning 1 Press the handle release button and pull the Ad important Ensure vacuum is in upright handle up or press the extension wand release position Do not use position II when cleaning button and pull the extension wand up above the floor in the upright vac mode as this will engage the motorized floor brush The rotating brush may damage your floor if run for a prolonged period of time in one area 2 Attach desired accessory onto the end of either the extension wand or the handle Fig 17 3 Your vacuum has tremendous suction power Adjust the amount of suction with
19. older Fig 11 When attaching the motorized floor brush ensure that the latching mechanism is fully locked in place to ensure electrical connection has been made 3 Attach the end of the extension wand to the tube on the back of the Lift Away canister until it clicks into place Fig 10 4 Slide the accessory holder a positioned opposite the upper cord wrap over the extension wand Align the tab with the groove and push down Fig 11 8 PP TOLL FREE 1 800 798 7398 NV365_NV356E_NV356K_NV357_NV355CS_NV356KCS_IB_E 6981 1_4 indd 8 11 08 11 12 46 PM Suction Release Collar Tso e c C Release suction for easier push amp l pull on high pile carpets and area rugs Wi I o EZ si TN TO USE 1 Rotate the cord release to quickly release the power cord 4 Gently press the floor nozzle down with your foot while you grasp the handle and tilt it back towards you Fig 13 NOTE The rotating brush on the motorized floor brush will not spin unless the nozzle is flat against the floor and the handle is tilted back 2 Secure the power cord in the cord hook Brush Roll ON 5 Due to the huge suction power of this vacuum it may become necessary at l Bare Floor i times to adjust the suction release c on the handle Fig 11 If the vacuum seems O or difficult to push or pull or if it is lifting up area rugs adjust the suction release
20. s equipped with a motor protective thermostat If for some reason your vacuum overheats the thermostat will automatically turn the unit off Should this occur perform the following steps to restart the motor thermostat 1 Move the On Off switch to the O Off position 2 Unplug the vacuum Vacuum turns off 3 Empty the dust cup and clean filters on its own 4 Check for blockages in hose accessories and inlet openings 5 Allow the unit to cool for a minimum of 45 minutes 6 Plug in the vacuum 7 Turn the On Off switch to the 1 On position to restart the vacuum Note If vacuum still does not start contact Customer Service at 1 800 798 7398 To purchase replacement parts please visit our website www sharkclean com or contact customer service 1 800 798 7398 18 TOLL FREE 1 800 798 7398 NV355_NV356E_NV356K_NV357_NV355CS_NV356KCS_IB_E K981 1_4 indd 18 11 08 11 12 47 PM EURO PRO FIVE YEAR 5 LIMITED WARRANTY EURO PRO Operating LLC warrants this product to be free from material defects and workmanship for a period of ive 5 years from the date of purchase when utilized for normal household use subject to the following conditions exclusions and exceptions The liability of EURO PRO Operating LLC is limited solely to the cost of the repair or replacement of the unit at our option This Limited Warranty does not cover normal wear of parts and does not apply to any unit that has been ampere
21. then the foam filter the door shut again until it clicks 6 Replace the dust cup 4 Replace the dust cup on top of the motor base Hook the two latches onto the tabs on the sides of the dust cup and push down to lock 14 PP TOLL FREE 1 800 798 7398 NV365_NV356E_NV356K_NV357_NV355CS_NV356KCS_IB_E K981 1_4 indd 14 11 08 11 12 46 PM Maintenance cont d Fig 27 CLEANING THE POST MOTOR HEPA FILTER 1 Remove the filter cover from the front of the vacuum by pulling up on the tab and pulling the cover away from the vacuum Fig 25 STake out the HEPA filter by pulling it straight out 3 Turn the filter over so that the dirty side is on the bottom and vigorously tap it clean against a garbage can to remove any dust Fig 26 4 Wash the filter under the tap using lukewarm water with the dirty side face down until the water runs clear Fig 27 Ado not put the filter in the washing machine or dishwasher NOTE The material in the filter will discolor over time This is NORMAL and will not affect the performance of the filter 5 Allow the filter to air dry for 24 hours Do not use a hair dryer or other heating methods to dry 6 Once the HEPA filter is dry replace it back into the vacuum 7 Replace the cover by inserting the two tabs into the holes at the top and then swinging the cover down until it clicks into place NV355_NV356E_NV356K_NV357_NV355CS_NV356KCS_IB_E 49811_4 indd 15 CLEANING THE POWER BRUSH
22. wledge to have read and understood the instructions for use and warnings set forth in the accompanying instructions www sharkclean com 19 NV355_NV356E_NV356K_NV357_NV355CS_NV356KCS_IB_E K981 1_4 indd 19 11 08 11 12 47 PM EURO PRO Operating LLC US Newton MA 02459 Canada Ville St Laurent Qu bec H4S 1A7 1 800 798 7398 www sharkclean com Copyright Euro Pro Operating LLC 2011 Printed in China Illustrations may differ from actual product NV355 NV356E NV356K NV357 NV355CS NV356KCS 110811 4 NV355_NV356E_NV356K_NV357_NV355CS_NV356KCS_IB_E K981 1_4 indd 20 11 08 11 12 47 PM
Download Pdf Manuals
Related Search