Sears CHCT300 User's Manual
Contents
1. and Retighten the knobs Aiming the fixture Loosen the knobs located on the sides of the fixture housing Using the top carrying handle tilt to desired position then retighten knobs There is a stop designed in the stand assembly which restricts downward aim ing of the fixture for safety reasons To prevent over heating and risk of burns or fire do not aim the fixture down at an angle of more than 10 degrees from horizontal HCT300 325 1410 12 17 03 9 50 AM Pa 4 Two year limited warranty Cooper Lighting the Company warrants this product the product against defects in material or workmanship for a period of two years from date of orig inal purchase and agrees to repair or at the Company s option replace a defective product without charge for either replacement parts or labor during such time This does not include labor to remove or install fixtures This warranty is extended only to the original purchaser of the product A pur chasers receipt or other proof of date of original purchase acceptable to the Company is required before warranty performance shall be rendered This warranty only covers product failure due to defects in materials or work manship which occurs in normal use It does not cover the bulb or failure of the product caused by accident misuse abuse lack of reasonable care alter ation or faulty installation subjecting the product to any but the specified electrical service or any other failur2. ber issued by the Company and must be returned freight prepaid Any product received without a Return Goods Authorization Number from the Company will be refused Cooper Lighting is not responsible for merchandise damaged in transit Repaired or replaced products shall be subject to the terms of this warranty and are inspected when packed Evident or concealed damage that is made in transit should be reported at once to the carrier making the delivery and a claim filed with them S COOPER Lighting Customer First Center 1121 Highway 74 South Peachtree City GA 30269 USA www cooperlighting com O 2003 Cooper Lighting Reproductions of this document without prior written approval of Cooper Lighting are strictly prohibited
3. e fixture Do not touch hot lens inside of wire guard or die cast housing located inside protective polypropylene outer shell This fixture has been designed with a protective outer shell which is safe for incidental contact with the fixture Do not handle or touch outer shell for extended periods of time and never touch the glass lens while fixture is HOT Always use the handle located at the top of the worklight to carry or aim the fixture Bulb gets HOT quickly Only contact switch plug when turning on The electrical system and the method of electrically connecting the fixture to it must be in accordance with the National Electrical Code and local building codes HCT300 325 1410 12 17 03 9 50 AM Pa E Do not operate the unit with a missing or damaged wire safety guard safety glass lens lamp containment or UV filter Do not direct the light at persons or look directly at lighted fixture e Use only with a 300 watt or smaller bulb Installing a bulb of a higher wattage could create a fire hazard or risk of burns Use of a higher wattage bulb will void the product warranty e Never touch the bulb with your bare hands Oil from your skin can cause premature failure Always handle the bulb with gloves or a soft cloth If lens is replaced use only a diffused tempered safety glass of equal thickness For maximum bulb life position light so that the halogen bulb r
4. e not resulting from defects in materials or workmanship Damage to the product caused by separately purchased non Company brand replacement bulbs and corrosion or discoloration of brass components are not covered by this warranty There are no express warranties except as described above THE COMPANY SHALL NOT BE LIABLE FOR INCIDENTAL SPECIAL OR CONSEQUENTIAL DAMAGES RESULTING FROM THE USE OF THE PRODUCT OR ARISING OUT OF ANY BREACH OF THIS WARRANTY ALL IMPLIED WARRANTIES IF ANY INCLUDING IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE LIMITED IN DURATION TO THE DURATION OF THIS EXPRESS WARRAN TY Some states do not allow the exclusion or limitation of incidental or con sequential damages or limitations on how long an implied warranty lasts so the above exclusions or limitations may not apply to you No other warranty written or verbal is authorized by the Company This war ranty gives you specific legal rights and you may also have other rights which vary from state to state To obtain warranty service please write to Cooper Lighting 1121 Highway 74 South Peachtree City GA 30269 Enclose product model number and prob lems you are experiencing along with your address and telephone number You will then be contacted with a solution or a Return Goods Authorization number and full instructions for returning the product All returned products must be accompanied by a Return Goods Authorization Num
5. emains within 4 of horizontal e Disassembly of your fixture will void the warranty e Use only with three wire extension cords that have three prong grounding plugs and that are suitable for outdoor use such as cords marked SW SW A SOW SOW A STW STW A STOW STOW A SJVV SJVV A SJOW SJOW A SJTVV SJTVV A SJTOVV SJTOVV A and grounding receptacles that accept a three prong plug When the fixture is used in wet locations Ground Fault Circuit Interruption GFCI protection must be provided on the circuit s or outlet s to be used Receptacles are available having built in GFCI protection and are able to be used for this measure of safety WARNING Deviation from the assembly instructions may result in a risk of fire or electric shock SAVE THESE INSTRUCTIONS Replacing the bulb Step 1 Loosen the screvv located at the top of the fixture recessed inside the outer shell Step 2 Open door frame assembly for easy access to the bulb Step 3 Using gloves or a soft cloth press the bulb to one side of the socket as indicated on the metal reflector Remove opposite end of bulb from the other side of the socket Reverse this procedure to install a new replacement bulb How to use The fixture is packed in a compact storage position Remove the fixture from the carton Loosen the knobs on the sides of the fixture and swing the fixture up so that the lens guard is directly above the closed or curved portion of the tubular steel st
6. pa 325 1410 12 17 03 9 50 AM Pep Regent Instruction Manual Manual de Instrucciones Directives HCT300 CHCT300 4 INE res 2 Y D O r SIVONVYS HCT300 325 1410 12 17 03 9 50 AM Pa 2 Regent CHCT300 Congratulations You have purchased a Regent Cool Touch 300 watt halogen worklight This worklight has been designed to provide a wide con centration of light for any project inside or outside your home The special outer shell of this worklight is much cooler and safer than an ordinary halo gen worklight Please review the following important safety instructions carefully What you need No tools are required for setup Light fixture with protective outer shell A Premium 300 watt halogen bulb B Stand C Safety guard D INSTRUCTIONS PERTAINING TO A RISK OF FIRE ELECTRIC SHOCK EXPOSURE TO EXCESSIVE UV RADIATION OR INJURY TO PERSONS IMPORTANT SAFETY INSTRUCTIONS WARNING To reduce the risk of FIRE ELECTRIC SHOCK EXPOSURE TO EXCESSIVE UV RADIATION OR INJURY TO PERSONS Lighted lamp is HOT Do not remain in light if skin feels warm e For indoor and outdoor use UL and cUL LISTED for wet locations e Fixture must be connected to a 120 Volt 60 Hz power source Any other connection voids warranty Keep away from flammable objects The bulb and fixture get extremely hot during use Always w unplug the light and let it cool 5 minutes before attempting to touch th
Download Pdf Manuals
Related Search