Sanyo VCC-9624 User's Manual
Contents
1. Basic connections for monitoring or recording The peripheral devices VCR monitor etc and cables are sold separately 1 Make the video signal connection between the camera and the monitor or time lapse VCR 2 Plug the AC adaptor toa wall outlet l Ea of connection to a monitor Adjust the picture on the monitor using the Brightness and Contrast controls ps gt VIDEO IN gt VIDEO OUT NOTE Fig 1 Make sure the AC adaptor is not connected to the wall outlet before connecting it to the 12 V DC input terminals When making the connections be careful to respect the polarity and not to shortcut the terminals VIDEO IN VIDEO OUT VIDEO IN Time lapse VCR sold separately Monitor sold separately Multiple cameras connection You can use multiple cameras by connecting them a camera switcher or a quad unit sold separately then conducting the surveillance from one location by splitting the monitor screen to view the image from each camera or by switching the image from each camera on the monitor screen For detailed information please refer to the installed devices instruction manuals 8 English CONNECTIONS AND INSTALLATION Coaxial cable connection 1 Cut and prepare the extremity of the coaxial cable sold separately as illustrated 2 Attach the coaxial cable to the base Loosen the CAMERA VIDEO OUT terminal screw A and the GND ter2. 2 English PRECAUTIONS Incase of problem Do not use the camera if smoke or a strange odour comes from the unit or if it seems not to function correctly Disconnect the power cord immediately and consult your dealer or a Sanyo Authorized Service Centre Do not open or modify Do not open the cabinet as it may be dangerous and cause damage the unit For internal settings and repairs consult your dealer or a Sanyo Authorized Service Centre Do not put objects inside the unit ake sure that no metal objects or flammable substance get inside he camera If used with a foreign object inside it could cause a fire short circuits or damages f water or a liquid gets inside the camera disconnect the power cord immediately and consult your dealer or a Sanyo Authorized Service Centre Be careful to protect the camera from rain sea water etc Be careful when handling the unit To prevent damages do not drop the camera or subject it to strong shock or vibration Install away from electric or magnetic fields If installed close to a TV radio transmitter magnet electric motor transformer audio speakers the magnetic field they generate will distort the image English 3 Protect from humidity and dust To prevent damages to the camera do not install it where there is greasy smoke or steam where the dampness may get too high or where there is a lot of dust Protect from high temperatures Do
3. are used please repeat this procedure for all the cameras NOTE If the vertical roll cannot be corrected by adjusting the L PHASE volume on camera 2 try adjusting the L PHASE volume on camera 1 If it still cannot be corrected please check that the polarity of the power cords of all connected devices is correct Camera 1 SYC L PHASE Spin Camera 2 English 13 SETTINGS AND ADJUSTMENTS Zoom and focus adjustments After the camera has been installed the zoom and focus must be adjusted while viewing on a monitor the transmitted image 1 Remove the lens cover then press on both sides of the secondary lens cover to remove it 2 Loosen the zoom ring knob then turn the ring towards T or W as necessary zoom in side The range will be smaller and the subject larger W Zoom out side The range will be wider and the subject smaller 3 Loosen the focus ring knob then turn the ring towards infinity or near as necessary 4 Repeat steps 2 and 3 until the desired image is obtained When finished tighten the zoom ring and the focus ring knobs Then install the secondary lens cover making sure it snaps in place and install the lens cover NOTE While making these settings be very careful not to scratch or damage the lens 14 English TROUBLESHOOTING Before taking the camera for repairs please check below to make sure that the ca
4. compensation will measure the light in the center area of the image and the lens iris will be automatically set for optimum image quality The subject contained in this area will be clear and bright When the sides of the subject background are very bright the subject itself is dark English SETTINGS AND ADJUSTMENTS BS In this case the backlight compensation default setting may not give good results To obtain a better image set the BLC switch to 1 ON then turn the LEVEL volume control to the right until the desired correction level is obtained hh ae Ete tk Main aay hn Men oa ag Ben 4 Manual white balance adjustment To set the colors first set the WB switch to then adjust as desired using the R color A adjustment volume controls B R WB 12 English SETTINGS AND ADJUSTMENTS E Line phase adjustment When using a camera switcher to connect two cameras or more to one monitor there may be a vertical roll of the images when switched if the phases differ In such a case adjust as described below 1 Set the SYC switch on the connected cameras to 1 2 Using the camera switcher switch the display on the monitor from camera 1 to camera 2 Adjust the L PHASE volume control on camera 2 until the vertical roll of the image stops If more than two cameras
5. in the direction of the arrow shown on the illustration Turn the camera unit all the way until screw B on the base reaches the tab 3 Remove the camera unit To remove the camera unit carefully apply a slight force until the screw B goes over the tab then carefully remove the camera unit CAUTION When removing the camera unit be careful not to hurt yourself with the camera unit fixing screws When removing the camera unit be careful as the video signal plug or power supply plug C cables are short and may become unplugged SETTINGS AND ADJUSTMENTS The digital process may disturb the image for about 5 seconds after the camera is turned on Factory settings The camera is shipped from the factory with the following settings These settings should give adequate results under normal conditions If the settings need to be modified please consult the reseller or installer A Color adjustment blue gain R red gain volume controls About the center WB white balance A automatic BLC backlight compensation switch 2 a ee 0 OFF SYC synchronization switch 0 Internal E LEVEL volume control 20 All the way to the left L PHASE line phase volume control About the center Backlight compensation setting When the subject is backlit set the BLC switch to 1 ON The backlight
6. must accept any interference received including interference that may cause undesired operation Changes or modifications not expressly approved by Sanyo may void the user s authority to operate this camera 5 PRECAUTIONS PARTS NAMES AND FUNCTIONS PREPARATIONS AND CONNECTIONS CONNECTIONS AND INSTALLATION SETTINGS AND ADJUSTMENTS TROUBLESHOOTING SPECIFICATIONS Accessories Screws for base installation 4 x 35 tapping screws YF The rated value label is located on the back of the camera FEATURES Built in interline transfer method 1 3 CCD approx 410 000 picture elements Low smear anti blooming low lag no burning and no geometric distortion using the CCD solid state image device Built in Vari Focal type auto iris lens F 2 0 2 7 f 2 6 5 6 mm 100 solid state components giving excellent immunity to shock and vibration Not subject to interference from magnetic or electrostatic fields e High sensitivity mininum required illumination is approx 6 lux at F2 0 TTL auto white balance auto tracking system With manual PAN TILT ROUND mechanism e Horizontal resolution more than 470 TV lines e Power supply 24 V AC operation
7. INSTRUCTION MANUAL COLOR CCD CAMERA a About this manual Before installing and using the camera please read this manual carefully Be sure to keep it handy for later reference SANYO VCC 9624 SANYO INDUSTRIAL VIDEO COLOR VIDEO CAMERA LIMITED WARRANTY OBLIGATIONS In order to obtain warranty service the product must be delivered to and picked up from an Authorized Sanyo Service Center at the user s expense unless specifically stated otherwise in this warranty The names and addresses of Authorized Sanyo Service Centers may be obtained by writing to SFS Corporation SFC s warranty administrator at any of the addresses listed below or by calling toll free 1 800 421 5013 New Jersey Office California Office Illinois Office 210 Riser Road 1200 W Artesia Blvd 900 N Arlington Heights Rd Little Ferry NJ 07643 Compton CA 90220 Itasca IL 60143 201 641 3000 310 537 5830 708 775 1414 THIS WARRANTY IS VALID ONLY ON SANYO PRODUCTS PURCHASED OR RENTED IN THE UNITED STATES OF AMERICA EXCLUDING HAWAII AND ALL U S TERRITORIES AND PROTECTORATES THIS WARRANTY APPLIES ONLY TO THE ORIGINAL RETAIL USER THE ORIGINAL DATED BILL OF SALE SALES SLIP OR RENTAL AGREEMENT MUST BE SUBMITTED TO THE AUTHORIZED SANYO SERVICE CENTER AT THE TIME WARRANTY SERVICE IS REQUESTED Subject to the OBLIGATIONS above and EXCLUSIONS below SANYO FISHER USA CORPORATION warrants this SANYO product against defects in materials and workma
8. adienne Cet appareil numerique de la Classe B est conforme a la norme NMB 003 du Canada This installation should be made by a qualified service person and should conform to all local codes English 1 This equipment has been tested and found to comply with the limits for a Class B digital device pursuant to Part 15 of the FCC Rules These limits are designed to provide reasonable protection against harmful interference in a residential installation This equipment generates uses and can radiate radio frequency energy and if not installed and used in accordance with the instructions may cause harmful interference to radio communications However there is no guarantee that interference will not occur in a particular installation If this equipment does cause harmful interference to radio or television reception which can be determined by turning the equipment off and on the user is encouraged to try to correct the interference by one or more of the following measures Reorient or relocate the receiving antenna Increase the separation between the equipment and receiver Connect the equipment into an outlet on a circuit different from that to which the receiver is connected Consult the dealer or an experienced radio TV technician for help This device complies with Part 15 of the FCC Rules Operation is subject to the following two conditions 1 This device may not cause harmful interference and 2 this device
9. any party to assume for it any other obligation or liability THE DURATION OF ANY WARRANTIES WHICH MAY BE IMPLIED BY LAW INCLUDING THE WARRANTIES OF MERCHANTABILITY AND FITNESS IS LIMITED TO THE TERM OF THIS WARRANTY IN NO EVENT SHALL SFC BE LIABLE FOR SPECIAL INCIDENTAL OR CONSEQUENTIAL DAMAGES ARISING FROM OWNERSHIP OR USE OF THIS PRODUCT OR FOR ANY DELAY IN THE PERFORMANCE OF ITS OBLIGATIONS UNDER THIS WARRANTY DUE TO CAUSES BEYOND ITS CONTROL SOME STATES DO NOT ALLOW LIMITATIONS ON HOW LONG AN IMPLIED WARRANTY LASTS AND OR DO NOT ALLOW THE EXCLUSION OR LIMITATION OF CONSEQUENTIAL DAMAGES SO THE ABOVE LIMITATIONS AND EXCLUSIONS MAY NOT APPLY TO YOU THIS WARRANTY GIVES YOU SPECIFIC LEGAL RIGHTS YOU MAY HAVE OTHER RIGHTS WHICH VARY FROM STATE TO STATE ATTENTION For your protection in the event of theft or loss of this product please fill in the information below for you own personal records Model No Serial No Located on back or bottom side of unit Date of Purchase Purchase Price Where Purchased 18 English INFORMATION USER Safety Guard THIS SYMBOL INDICATES THAT THERE ARE IMPORTANT OPERATING AND MAINTENANCE INSTRUCTIONS IN THE LITERATURE ACCOMPANYING THIS UNIT WARNING TO PREVENT THE RISK OF FIRE OR ELECTRIC SHOCK DO NOT EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE For the customers in Canada This Class B digital apparatus complies with Canadian ICES 003 Pour la client le can
10. ew on terminal S N ratio More than 48 dB Minimum required illumination 6 lux F2 0 lens White balance A Automatic TTLsystem M Manual manual switching Backlight compensation 1 0 OFF manual switching Active zone center area light measuring system Backlight compensation iris level adjustment Manual LEVEL volume control Gain control Automatic MONITOR output pin 1 0 Vp p 75Q test point pin F2 0 2 7 f 2 6 5 6 mm varifocal lens manual zoom and ocus adjustment Iris system echanical auto iris Manual adjustment image angle range Horizontally pan 45 Vertically tilt 60 Rotation of he camera unit 35 Operational environmental conditions Temperature 10 C 50 C Humidity less than 90 RH Storage environmental conditions Temperature 20 C 60 C Humidity less than 70 RH Power supply 24 V AC Power consumption 24 V AC approx 3 1 W Weight Approx 430 g Features and specifications are subject to change without prior notice or obligations 16 English SPECIFICATION DIMENSIONS 112mm 6 04 3mm 9110 83 5 English 17
11. ew openings for base installation These openings are to attach the base to the ceiling or a wall using the four supplied tapping screws CAMERA VIDEO OUT terminal screw Video signal output terminal Insert the center wire of the coaxial cable into the CAMERA OUT terminal then tighten the screw to secure it GND ground terminal screw Video signal ground terminal Insert the shielding mesh of the coaxial cable under the GND terminal plate then tighten the screw to secure it 5 Cabling tab When the cables cannot be run behind the ceiling etc remove this tab to allow the coaxial cable to go through English 9 24 V AC input terminal 24 V AC GND With this camera use only the 24 V AC power adaptor model No VPT 115 available from Sanyo Power supply connections Use a 3 wire grounded cable 22 AWG or more and connect as shown by the illustration CAUTION prevent camera and or adaptor failure pay close attention polarity when making the connections prevent fire hazard any UL listed wire rated VW 1 should be used for the 24 V AC cable input terminal 7 Lens cover This cover will protect the lens from dust and damage Turn the cover in the direction of the arrow shown on the illustration to remove it To install the cover align the tabs A with the openings then turn it in the opposite direction PARTS NAMES AND FUNCTIONS Secondary lens cover Lens Focus
12. ght compensation turn it to the right until the desired correction level is obtained L PHASE line phase volume control Used when the SYC switch is set to 1 Turn it to adjust the line phase between two or more cameras 6 English PREPARATIONS AND CONNECTIONS Concerning the coaxial cable To connect the camera to peripheral devices use a coaxial cable with BNC plug Cable type RG 6U 5C 2V 500 maximum Cable type RG 11U 7 2 600 maximum If the type of peripheral devices connected the type of cable used and or the cable length are not as specified the image and synchronization signals may not be transmitted correctly CAUTION Use CCTV Video grade coaxial cable Due to its construction an RG 59U cable will not transmit the signal properly when installed through conduits or through the air and therefore cannot be used Installing the BNC plug sold separately 1 Cut the extremity of the coaxial cable sold separately as illustrated 2 Insert the cable through the adaptor then turn the shielding mesh over _ 3 Loosen the center wire securing screw of the plug then install the cable in the BNC 7mm 8mm plug so that the center wire is threaded through the plug center opening Before tightening the center wire securing screw make sure the center wire comes out KEN 4 through the plug center opening 4 Screw the adaptor onto the plug R English 7 CONNECTIONS AND INSTALLATION
13. mera is used correctly If it still does not perform correctly please consult your dealer or a Sanyo Authorized Service Center E No picture on the monitor screen Is the power turned on to all connected devices Is the voltage correct e Are all the signal connecting cables correctly connected 15 the lighting sufficient The picture is not clear Is the monitor correctly adjusted Is the lens focus correctly adjusted Are the lens surfaces clean f there is dust or finger prints on the lens the image quality will deteriorate To clean the lens use a soft cloth or a commercially available lens cleaning set SERVICE This camera is a precision instruments and if treated with care it will provide years of satisfactory performance However in the event of a problem the owner is advised not to attempt to make repairs or open the cabinet Servicing should always be referred to your dealer or Sanyo Authorized Service Center English 15 SPECIFICATIONS TV system Based on the NTSC color system Scanning system 525 TV lines 60 field sec 2 1 interlace Image device Interline transfer method 1 3 inch solid state CCD Picture elements 811 H x 508 V Effective picture elements 768 H x 494 Synchronization system Internal sync L L Line lock Resolution 470 TV lines horizontally 350 TV lines vertically Video output signal level 1 0 Vp p 75Q scr
14. minal screw B then insert the center wire of the coaxial cable in the CAMERA VIDEO OUT terminal and make sure the shielding mesh part of the cable is located under the GND terminal plate then tighten both screws A and B to attach the cable CAUTION If the base is installed on a wall or if for any other reason the cable cannot be run behind the installation surface break off the tab C with nippers to allow the cable to go through Camera installation 1 Install the base on the ceiling etc using the four supplied tapping screws A This camera is not waterproof It cannot be installed outside When installing the base make sure to verify that the installation surface will allow full tightening of the screws Plaster board etc may not give a strong enough installation and it is recommended to use a reinforcement or other method so that the screws are anchored securely CAUTION When installing the base on a wall make sure to align it as indicated in Fig 1 English 9 CONNECTIONS AND INSTALLATION 2 Install the camera unit onto the base Connect the video signal cable plug B and the power supply cable plug C from the base to their respective connectors on the camera unit Then install the camera unit onto the base 3 Securely tighten the four camera unit fixing screws D evenly Camera removal 1 Loosen the four camera unit fixing screws A evenly 2 Turn the camera unit of about 80
15. not install close to stoves or other heat generating devices such as spotlights etc or where it could be subject to direct sunlight as that could cause deformation discoloration or other damages Be careful when installing close to the ceiling in a kitchen or boiler room as the temperature may raise to high levels Install where the temperature range will stay between 10 C and 50 C no condensation Cleaning Dirt be removed from the cabinet by wiping it with a soft cloth To remove stains wipe with a soft cloth moistened with a soft detergent solution and wrung dry then wipe dry with dry soft cloth Do not use benzine thinner or other chemical product on the cabinet as that may cause deformation and paint peeling Before using a chemical cloth make sure to read all accompanying instructions Make sure that no plastic or rubber material comes in contact with the cabinet for a long period of time as that may cause damage or paint peeling PARTS NAMES AND FUNCTIONS Manual pan tilt and rotation The angle of the lens can be adjusted manually in ranges indicated below A Horizontally 45 B Vertically 60 C Rotation of the camera unit 35 VN 4 b 4 English PARTS NAMES AND FUNCTIONS Camera unit fixing screws 4 These screws are used to attach the camera unit to the base Tighten the four screws evenly when attaching the camera unit Scr
16. nship for the periods specified below SFC will repair or replace at its option the product and any of its parts which fail to conform to this warranty The warranty period commences on the date the product was first purchased or rented at retail LABOR PARTS IMAGE DEVICE 2 YEARS 2 YEARS 2 YEARS EXCLUSIONS This warranty does not cover A the adjustment of customer operated controls as explained in the appropriate model s instruction manual or the repair of any product whose serial number has been altered defaced or removed This warranty shall not apply to the cabinet or cosmetic parts antenna knobs batteries or image burns to projection or picture tubes caused by electronic devices or games This warranty does not apply to uncrating setup installation removal of the product for repair or reinstallation of the product after repair This warranty does not apply to repairs or replacements necessitated by any cause beyond the control of SFC including but not limited to any malfunction defect or failure caused by or resulting from unauthorized service or parts improper maintenance operation contrary to furnished instructions shipping or transit accidents modification or repair by the user abuse misuse neglect accident incorrect power line voltage fire flood or other Acts of God or normal wear and tear The foregoing is in lieu of all other expressed warranties and SFC does not assume or authorize
17. ring To set the focus loosen the focus ring knob then turn the ring owards infinity or near as necessary When the focus is set as desired tighten the focus ring knob Zoom ring To adjust the viewing range zoom loosen the zoom ring knob hen turn the ring towards T the range will be smaller and the subject larger or W the range will be wider and the subject smaller as necessary When the zoom is set as desired tighten he zoom ring knob 42 GND ground pin For monitor use See 42 49 MONITOR output pin When setting up the camera connect a monitor to this video output pin and to the GND pin using alligator clip cables then using the image displayed on the monitor set the surveillance angle and range the lens focus etc Color adjustment B blue gain R red gain volume controls WB white balance switch A Automatic white balance M Manual white balance To set the white balance manually set the WB switch to M then adjust the color by turning the B and R volume controls BLC backlight compensation switch 0 Backlight compensation off 1 Backlight compensation on For backlight compensation set the BLC switch to 1 then if necessary adjust the LEVEL volume control SYC synchronization switch 0 Internal sync 1 L L line lock syne LEVEL volume control Used when the BLC switch is set to 1 Under normal conditions it should be turned all the way to the left When adjusting the backli
Download Pdf Manuals
Related Search