Sanyo DIR-2000 User's Manual
Contents
1. CHannel Scan Memory This is a list of active channels that is created during the Channel Search process and stored in memory Viewers can scan through this list using the Up Down Scan keys This area is also used to delete unwanted channels Channels viewers want to skip over when scanning However to undelete a channel another Channel Search will need to be completed For DTV the CHannel Scan Memory will include only major channel numbers CHannel Map This displays pages of ALL available channels in the database and their status Channels that have been removed from the CHannel Scan Memory will appear as blue numbers Any channel can be selected from the CHannel Map even the blue channels For DTV the CHannel Map will show only major channel numbers Channel Number Entry Area This area is used to actually select a channel number when adjusting or setting the Scan Memory and Initial Channel features Channel NightScan NightScan searches for new DTV channels and adds them to the channel database This search will be performed at random intervals during an inactive time Cursor Keys The CURSOR keys are the four arrow keys on the remote control and on the SDB front panel When accessing any page menu option or condition the front panel keys and the remote control keys operate identically DTV Digital Television Picture is transmitted in a digital format that is sharp and crystal clear DTV In2. SANYO DIR 2000 Digital Box Owner s Manual Visi LABES SETTAR TEUR ENHANCED Dh DEFINITION DOLEY TELEVISION TUNER niin DIGITAL As an ENERGY STAR Partner Sanyo Manufacturing Corporation has deter mined that this product meets the Printed in U S A SMC May 2002 ENERGY STAR guidelines for energy Part No 1JC6P1P0109 efficiency Service Code 610 297 0548 CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN CAUTION TO REDUCE THE RISK OF ELECTRIC SHOCK DO NOT REMOVE COVER OR BACK NO USER SERVICEABLE PARTS INSIDE REFER SERVICING TO QUALIFIED SERVICE PERSONNEL THIS SYMBOL INDICATES THAT DANGEROUS VOLTAGE CONSTITUTING A RISK OF ELECTRIC SHOCK IS PRESENT WITHIN THIS UNIT A A THIS SYMBOL INDICATES THAT THERE ARE IMPORTANT OPERATING AND MAINTENANCE INSTRUCTIONS IN THE LITERATURE ACCOMPANYING THIS UNIT WARNING TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK DO NOT EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE IMPORTANT SAFETY INSTRUCTIONS CAUTION PLEASE ADHERE TO ALL WARNINGS ON THE PRODUCT AND IN THE OPERATING INSTRUCTIONS BEFORE OPERATING THE PRODUCT PLEASE READ ALL OF THE SAFETY AND OPERATING INSTRUCTIONS RETAIN THIS LITERATURE FOR REFERENCE Follow all instructions Positioning the appliance 1 Do not place your appliance on an unstable cart stand shelf or table Serious injury to an individual and damage to the appliance may result if it should fall Your salesperson can rec
3. and you press the SUB CH key the SDB will automatically change the Figure 51 Channel entry area circled channel number entry area D in the full banner display A digital channel number may be entered Audio Heception Audio options will depend on the channel tuning system selected and the current broadcaster s signal received The audio mode will display on screen for each selected choice if available l 2 2 NOTES ua T4 Press the AUDIO key current setting will appear on screen ge oe To change setting press the AUDIO key repeatedly until the desired option appears DTV options Main Sub 1 Sub 2 Sub 3 x z NTSC options Stereo Mono SAP Figure 52 DTV For DTV Main Option Main For NTSC Stereo Press ENTER to instantly select the option If audio selection is not available the Audio mode will change to the SDB default modes If you select SAP while watching an NTSC channel the SDB will remain in the Figure 53 NTSC Need help SAP audio mode until another option is selected If SAP is not available the Option Stereo Visit our Web site at audio mode defaults to Stereo WWW Sa nyoctv com If you select Sub 1 while watching a DTV channel the SDB will remain in the Sub 1 audio mode until IA ITYAAM l another option is selected If Sub 1 is not available the audio mode defaults to Main V Guide The V Guide feature is used to access
4. set captioning to any mode other than Text I or Text 2 or press the RESET key to cancel caption ing and customized settings Caption 2 This is an alternative mode for program caption ing Caption 2 may be used by the broadcaster to provide captions in another language such as Spanish or French Text 1 This mode is used to display large amounts of text This text will appear within a black box that may be nearly as large as the TV screen Text displayed in this manner does not generally relate to the program These captions may be used by broadcasters to provide weather reports community bulletins stock quotes etc Text 2 This mode is an alternative mode used to display large amounts of text The same types of information displayed in Text 1 can be displayed in Text 2 NOTE This SDB provides standard analog closed captioning displays Need help Visit our Web site at WWW Sanyoctv com Figure 64 Text 1 Care and Cleaning The surface of the cabinet can be damaged if not properly maintained Many common household aerosol sprays cleaning agents solvents and polishes will cause permanent damage to the fine surface 1 Unplug the power cord before cleaning 2 Use a dry cloth for cleaning 22 Troubleshooting Before calling for assistance please look for the condition that most closely resembles your problem in the following charts then follow the instructions for that condition Visit our web
5. 0 9 the Brief Channel Number Display will appear on the screen 2 Enter a channel number After three seconds the channel will be selected or press the ENTER key to instantly select the channel bs Pigs mici dure aar Figure 43 NOTE During number entry use the left key to undo an entry The following conditions of selecting a direct channel will occur If you select a nonexistent DTV channel or a very weak NTSC channel see figure 43 If you select a valid DTV channel that is currently broadcasting no video signal or no audio signals see figure 44 If you select a valid DTV channel that is broadcasting an audio signal but no video signal see figure 45 If you incorrectly connect a DVD player or VCR to the NTSC RF Input on Figure 45 back of SDB and then try to watch a copyrighted program disc or tape A copyright protection signal is detected which triggers the SDB to display an error message see figure 46 Figure 46 Sub CHannel Selection The Sub CHannel key on the remote control can be used as a direct channel selection process for DTV channels Any time the Sub CHannel key is pressed the DTV tuning system is automatically selected Use this key to select major and minor channels After a major channel is entered the Sub CHannel key is used to provide access to the minor channels Using the Sub CHannel key to select a channel 1 Press the SUB CH key the m
6. Press the ENTER key NOTE If you are watching an NTSC analog channel PCM will be the only option shown Need help Visit our Web site at www sanyoctv com Figure 35 Digital Audio Output SDB Menu Operation Picture x QuickTips m If you don t recognize words in the on screen menu change the menu option language or press the remote control RESET key twice personalized settings will be reset to factory defaults um The CH MAP remote key will only operate the Sanyo Digital Box Need help Visit our Web site at WWW Sanyoctv com Selecting the Menu Language All menu Categories Features and Options will appear in the language you choose English is the default language 1 Use the amp 33 amp 2 keys to highlight the Menu Language feature 2 Press the right key 3 Use the amp 33 C 2 keys to highlight a language option English Espa ol or Francais Press the ENTER key NOTE The menu language does not affect the Captioning text language System Information This feature is designed for use by the factory and or service personnel The display is for diagnostic purposes only there are no customer adjustments Figure 37 System Information Channel Map The SDB automatically displays the CHannel Map in columns regardless of the total number of channels Rows will vary based on the number of channels received If the CHannel Map page i
7. Reception and 4 3 Aspect Scan Mode Interlaced 4801 CH Scan Memory Reset with initial channel search Initial Channel Off Display Banner Brief Audio Reception NTSC Stereo DTV Main Digital Audio Out S P DIF a ae English Figure 60 Resetting the SDB to Caplio 2 s sspe ERES Off factory default settings V GUIUG 4 544946 Pied Off with all settings rating limits cleared 21 Closed Captioning Captioning is text transmitted along with the picture and sound so it can be displayed on the screen Captioning QuickTips will depend on the channel tuning system selected and the current broadcaster s signal received Closed Captioning is received only through the NTSC tuner m If Caption Text mode is Selecting Captioning NL no Press CAPTION key to select desired options captioned text is broadcasted a black Caption OFF Caption 1 Caption 2 Text 1 Text 2 box may appear and ccn MM MM MN remain on the TV screen Local broadcasters decide which caption signals to transmit They may not choose to provide captions or may provide captions in one or all of the available modes Caption 1 This is the main mode used for program caption ing words match the program you are watching Almost all broadcasters will use Caption 1 to transmit program captions These captions are generally one or two lines To remove this black box
8. current setting m Press the remote control RESET key to clear all customized settings and return to factory default settings 2 4 Use the C 39 C 22 keys to highlight the desired feature 5 Press the gt key 6 Use the amp 3 amp 29 keys to highlight the desired option Figure 17 Category tab SDB starts searching 7 Press ENTER to set or choose the highlighted option highlighted in yellow T d ia d with Feature listed channels 8 Press MENU to exit OR 9 Use the C amp 33 Sz keys to move to the category tab area and the E keys to select another category Operational Tips The Cursor keys are multi functional keys Figure 18 Option selected During numeric entries the key will undo any number entered 0 9 This allows numbers to be corrected or changed during channel selection or Clock Day manual settings Need help Visit our Web site at WWW Sanyoctv com SDB Menu Operation Picture 2 For Picture Aspect Ratio m The 4 3 ratio setting is the NTSC standard um The 16 9 ratio setting is a wide screen picture image 2 m Press the remote con trol RESET key to clear all customized settings and return to factory default settings SDB starts searching for available channels For Pix Picture Shape The PIX SHAPE key on the remote operates the same as the PIX SHAPE menu selection m Using the rem
9. pePeseradeitiaaudsenene seus 5 System Information 0 0 00 cee eee 16 DPECWICAIONG cos dau teh rua den EE E sees een ake 5 Other Feature Operation Basic Startup and Using the Ch l Map ooon 16 Connections Refer to Quick N Easy Startup Guide ink n dE Express Channel Selection 23 oz veri erm 17 Understanding the DIR 2000 Features 6 8 Selecting a Direct Channel 405 18 Using the Remote Control 00050 9 10 Selecting a Sub Channel SDB Menu Operation sosse cei wees EE CE eee 11 16 Major Minor Channels 18 19 General Menu Operation lllllleleleelnn 11 Anlo Reon 19 rege Aa Ste V Guide Operation 1s remm bea E GU RES PUER ed 20 E i SDB Output Jacks Connection 0000 00 21 o a enna ea ian eee nae aaer nia e Resetting the SDB 12 524 oos er e dor YER br ae 2 veri Wunr CPC dacsoak wine 12 Cioscd Captioning Channel Operation Selecting Caption Options 005 22 Channel Search l3 Care and Cleaning see 22 Channel Scan Memory sessiyasida 13 Troubleshooting 46 acies soya d RR IRE EBENE RAE 23 Initial Channel setup 00 00 eee My GE JAM EE 23 Channel Display Banner Info 14 Walt dnb and OChVICS 2224500 oes redits ee pun ga s 24 Introduction Welcome to the World of Sanyo Thank you for purchasing the Sanyo Digital Box SDB You made an excellent choice for Performance Reliabili
10. press the VCR key after programming the remote control 1 SDB Mode Key Press to select Sanyo Digital Box as the operating mode 2 VCR Mode Key Press to select VCR as the operating mode Must be programmed refer to Quick N Easy Startup Guide 3 Input Key Use this key to switch between TV and Video modes or TV and VCR modes 4 Number Keys Use these keys to directly select channels on your SDB TV and VCR Also use them to set the Clock and Day 5 Channel CH Scan Up Down Keys Use the A V keys to select next channel up or down on your SDB TV and VCR For DVD operation use these keys to skip forward or reverse DTV channels will show only the major channel numbers These keys have multiple usage during normal viewing they function as scan keys within the menu system they function as directional keys Channel Up Down Scan keys move highlight in a con tinuous loop through all available channels NTSC P gt DTV Same function as item 20 cursor keys Tuner Key Use this key to toggle from one tuning system to another digital DTV channels and analog NTSC channels cable and VHF UHF This key will only operate the SDB 7 Sub CH Channel Key This key will only operate the SDB Use this key to access minor channels numbers Pix shape Key Use this key to access the picture shape options LetterBox Cropped Stretch and Expand This key will only operate the SDB 9 Menu Ke
11. site at WW W SanyOCctv CcOm or call toll free 1 800 877 5032 Ho Pichre or Ho sound Press the Volume key Is picture and sound ok and Change Channels Yes Maybe a blank channel signal not being transmitting or weak was selected No Check to be sure all your equipment is properly connected turned on tuned to channel 3 or 4 VCR or TV and correct mode selected Poor slereoreception L Press AUDIO key Is the quality sound better Yes Problem is with program or weak signal station cable or satellite reception No Change channels Jcreemn is sold Die L Press the Channel Did the Blue Screen disappear Up Down key once E Normal operating conditions You are changing channels faster than the video can be processed No Signal might be too weak to be received Try installing an outdoor antenna or repositioning existing antenna Cannot selector scam some channels L Press the RESET key Did the problem go away twice personalized settings ves t may have been the channel scan memory or V Guide settings will be reset to factory defaults Biank Channel Map Page Start Channel s the channel map page still blank Search ion Problem could be NO ATSC or NTSC signal received during channel search process No Press CHannel Map to select Map page Channels will be available only if the transmitted signals were detected hiv remote control wif not o
12. the parental control restrictions This Sanyo Digital Box is equipped with QuickTips a V Chip that can be programmed to block shows with content you deem as inappropriate for your children to view There are three guidelines to choose Movies TV Age and TV Content Each category is blocked as rat Be eee ny eee ing information is received and decoded The V Guide blocked rating restricts the viewing of Digital and NTSC channels then press the E EUSP aey fi BLOCKING MOVIES n temporarily override the restriction settings and instantly return to 1 Press V GUIDE key on the remote control once the entry page of the MON TWEEN V Guide parental control setup OSD will appear Pl mar 7 normal viewing Press the ENTER key to proceed to the main option selection page Th SS Use the E keys to choose Movies HER Use the 68 amp keys to highlight your choice such as R Press ENTER key to switch between the Blocked and Unblocked option rating 2 a V Guide restrictions will be restored when power is reapplied Figure 54 V Guide nN A W N Figure 55 V Guide Main Option Display Figure 56 Movie Rating R blocked NOTES As a Rating Limit is selected e Block action will block all higher rated limits For example Setting the limit to Block an R rating automatically blocks the ratings NC 17 and X e Unblock action will unlock all lower rated limits For example
13. Ratio Selecting the Scan Mode for DTV Channels The SDB scan feature is designed to automatically adjust your TV s picture image depending on the signal received and tuner selected For conventional TV the scan mode should be set to interfaced For advanced tele vision the scan mode can be set to either interlaced or progressive In order to received the best quality picture match your settings with your equipment DTV advanced digital or NTSC conventional analog 1 Use the C 3 amp 9 keys to highlight the Scan Mode feature 2 Press the key 3 Use the C 3 C22 keys to highlight the appropriate option Interlaced or Progressive Press the ENTER key NOTE Normal is the only option available for NTSC channels Figure 22 Scan Mode selection SDB Menu Operation Channel Channel Category Use this feature to automatically search and scan for available channels including NTSC and DTV channels The Channel Category adjustable features are Search Scan Memory Initial Channel and Display Banner im Some features and options may not be available at all times depending on your current signal recep tion tuner and channel selection Starting Channel Search NOTE An initial search occurs during the first time setup proce dure Running a manual search should be necessary only when you want to search for channels that may have been added or to recover channels you deleted using the Sc
14. Setting the limit to Unblock a PG 13 rating automatically unblocks the ratings PG and G e For complete V Chip operation and function capabilities please refer to EIA 744A Standard U S requirements only on Web site http www tvguidelines org BLOCKING TV PROGRAMS TV Age Based 1 Press V GUIDE key 2 Press the ENTER key to proceed to the main option selection page TV Content Based 1 Press V GUIDE key 2 Press the ENTER key to proceed to the main option selection page 3 Use the keys to choose TV Content 3 Use the keys to choose TV Age 4 Use the C 3 E gt keys to highlight a content 4 Use the C C33 keys to highlight your option such as D Suggestive Dialog choice such as TV PG 5 Use the amp then CE GEP keys to high 5 Press ENTER key to switch between the light your choice such as TV14 Blocked and Unblocked rating option 6 Press ENTER key to switch between the Blocked and Unblocked rating option 7 Use the amp key to select another category Repeat steps above Need help Visit our Web site at WWW Sanyoctv com e0esssososccoscocosecocecceseccscecceccoccecescoocecececeosceccsecco Figure 58 TV Content D Suggestive 20 Dialog TV14 blocked SDB Output Jacks Connection Connect the SDB Output D jacks to a VCR s A V input jacks SDB QuickTips m A V and A V2 jacks have identical func tions Any compatible video equ
15. ajor channel number for the current program will appear with a list of up to three available minor sub channels The selected minor channel will appear with a yellow arrow indicator 2 While the Sub Channel Display is on the screen select the minor channel using the Channel up down keys If more than three minor sub channels are available scroll up or down the list to locate channel Figure 47 Major Channel with Minor Channel 02 selected 3 Press ENTER to instantly select the minor channel or just wait for three seconds and the SDB will automatically select the minor channel NOTES e If no keys are pressed after five 5 seconds the Sub CHannel display will disappear from the screen While the Sub CHannel display is on the screen only the POWER ENTER and CHANNEL SCAN keys are operable Selecting a Major or Minor Channel using the Sub CHannel Key If any DTV minor channel number is entered as 00 or 0 the SDB will To select a major channel with a specific minor sub channel enter the Press ENTER to instantly select the minor channel or just wait for three E wu QuickTips N DTV Channels may be selected by entering only the major number If a DTV minor channel is not entered after pressing the Sub CHannel key the SDB will automatically select the lowest minor channel 01 or 1 for the DTV major channel entered For example if D34 __ is entered the SDB will tune to DTV m Major
16. an Memory feature m If you cannot scan some channels check the CH map page and restart channel search operation or press the remote control RESET key to rescan active Figure 23 Channel Search channels 1 Press MENU key for on screen display Use the S 52 keys to select the Channel Category Use the 6S Gz keys to highlight the Search feature Press the key Use the keys to highlight Start a Channel Up down Press ENTER to start channel search The SDB will automatically Scan keys move high start searching for available Digital DTV and NTSC analog channels The NTSC signal search includes Cable and VHF UHF channels QN Un A Q N light in a continuous loop NTSC NOTES Continuous e The on screen message will appear with arrows displayed across Loop the bottom of the screen to indicate activity as the search process DTV continues See Figure 24 This may take some time so please be patient 3 a When the remote Channel up down keys are pressed repeatedly faster than the video can be processed the screen will change to a solid blue color with only a e During the Channel Search procedure only the POWER key is operable Figure 24 SDB searching for active channels Channel Scan Memory Channel scan memory is a list of active channels that you can scan through when using the CHannel Scan up down keys The scan 2 e hata process will select
17. annel by entering the major and minor numbers of the channel as follows 4 3 Sub 0 and 5 for channel D43 05 NOTES cri La The CHannel Map shows all available channels and reflects the Figure 42 NTSC Channel C52 current status of channels within the CHannel Scan Memory AII selected deleted channels will appear blue The tuner channel DTV and NTSC categories DTV digital channels with only major channel numbers listed NTSC analog channels with Cable channels 01 125 or VHF UHF channels 02 69 Entering 00 for the minor channel number will cause the SDB to tune to the NTSC channel matching the major channel number Need help Visit our Web site at www sanyoctv com eesosossosecesoscooceoscosooceocooccoceoceccooccocecccececcecececees Sub CHannel Selection QuickTips m Changing a channel within the same tuner system simply enter the channel number For example DTV to DTV or NTSC to NTSC Need help Visit our Web site at www sanyociv com Direct Channel Selection The 0 9 Number keys are used to select channels directly within the Brief Channel Number Display entry area DTV or NTSC channels 01 through 09 can be entered using one or two digits To enter one hundred digit press and hold the 1 key for about two seconds if cable channels are available 1 will appear Then enter the other two digits To select a direct channel 1 Press any numeric key
18. channels can be Channel 34 01 i 2 selected from the CH Map page m Minor channels can be selected only when the Sub CHannel key is pressed then the Major channels appears with a list of available minor channels 3 u If the RF out jack is tune to the NTSC channel matching the major channel number For example if D24 00 is entered the SDB will tune to Cable C24 or UHF channel 24 major number press SUB CH key and then enter the minor channel number Figure 48 Channel Entry for Major Channel seconds and the SDB will automatically select the minor channel Operational Tips l used the signal will be 2 If you are watching an NTSC channel and decide E DOME KEH gums monaural to change to a DTV channel Simply press the am MM SUB CH key the DTV channel number entry Du D D display will appear Enter the channel num ber Then press ENTER to instantly select the minor channel or just wait for three seconds and the SDB will automatically select the minor channel m Stereo is not available through RF out only through A V connections Figure 49 If watching a DTV channel with the banner dis played on the screen and you press the SUB CH key the SDB will automatically remove the full banner see Figure 49 The Brief Channel display will appear with sub channels listed see Figure 50 If watching an NTSC channel with the banner dis played on the screen
19. dicator Indicates a digital ATSC channel is being received by the SDB Direct Channel Selection This allows the viewer direct access to DTV and NTSC channels Use the 0 9 number keys to directly enter a new channel number Use the SUB CH key when necessary HDTV High Definition Television Picture is transmitted in a highly defined format Initial Channel This feature allows the customer to select a specific channel for the SDB to tune each time the unit is switched on If not set the last watched channel will be selected NTSC National Television Standards Committee OSD On Screen Display PCM Pulse Code Modulation is a binary digital signal format used for digitizing analog data The SDB outputs PCM audio signal from digital audio output This is the default digital audio output signal SDB Sanyo Digital Box S P DIF S P DIF is a digital audio format which can transmit a Dolby Digital bitstream By connecting this output to an AV receiver that includes a Dolby Digital decoder you can reproduce up to 5 1 channel surround sound Tuner Indicator A single character D or C will appear directly to the left of the channel number Channels selected with the digital DTV tuner will be identified with a D Channels selected with the analog NTSC tuner will be identified with a C if cable or will be blank if Off Air VHF UHF Tuner Key This key is used to switch between only
20. during the last Channel Search The Map pages also indicate channels which have been deleted from the Channel Scan Memory List they appear as blue numbers For DTV the CHannel Map will show only major channel numbers Setup Category Features and Options Clock Day Use this feature to choose between Auto and Manual clock settings Choosing Auto will begin the automatic clock setting routine If you choose Manual you will be directed to input the correct time and day infor mation manually using the 0 9 and Cursor keys on the remote control Menu Language There are three options available for the menu display language English Espa ol and Fran ais All menu categories features and options will appear in the language you choose English is the default language Digital Audio Output System Information The information displayed is for service technician use only When receiving a digital signal there will be two Audio options PCM and S P DIF PCM will be the only option available when receiv ing an analog signal Figure 14 Digital Settings Figure 16 System Information 8 Using the Remote Control Use this universal remote to operate your SDB TV VCR and DVD Refer to the Quick N Easy Startup Guide for programming procedure Since this remote control will operate several pieces of equipment make sure you press the appropriate key to control that component For example to operate your VCR
21. e CHannel Map page is active only the Power CH l Figure 40 NTSC CH Map Map Tuner Enter and Cursor keys are operational 2 When the CHannel Map page is active the TUNER key will switch between the tuning systems DTV and Express Channel Selection NTSC 2 Use the 5 amp 2 2 keys to highlight the desired category DTV or NTSC 3 Press the CH MAP key to exit NOTE Deleted channels will be blue The current channel will have a yellow background T m rE r T pa r ALAA ELLE ELE m qp j p miun i h E a a HERRN LLIT moamm mprm LILIITIY To quickly select a channel within the CHannel Map page 1 Press the CH MAP key on the remote control 2 Use the 55 2 keys to highlight the desired category DTV or NTSC 3 Use the CURSOR keys to highlight the desired channel For example Channel 52 Press the ENTER key See Figure 42 TIT LL mr r F H r A EE LILLLIL LE Ini hE te bi Beene PM TMATE LT LIIPLILEI TTT TIT TT PE ET T ickly switch bet a DTV and NTSC channel M and me Figure 41 Channel Map of NTSC 1 Press the TUNER key repeatedly until the desired tuning system channels display channel number display appears on the screen 2 Select an NTSC cable channel by entering the channel number For cable channels above 100 press and hold the 1 key for about two seconds until 1 appears Then enter the other two digits OR 3 Select a DTV ch
22. es not apply to repairs or replacements necessitated by any cause beyond the control of SMC including but not limited to any malfunction defect or failure caused by or resulting from unauthorized service or parts improper maintenance operation contrary to furnished instructions shipping or transit accidents modification or repair by the user abuse misuse neglect accident incorrect line voltage fire flood or other Acts of God or normal wear and tear The foregoing is in lieu of all other expressed warranties and SMC does not assume or authorize any party to assume for it any other obligation or liability THE DURATION OF ANY WARRANTIES WHICH MAY BE IMPLIED BY LAW INCLUDING THE WARRANTIES OF MERCHANTABILITY AND FITNESS IS LIMITED TO THE TERM OF THIS WARRANTY IN NO EVENT SHALL SMC BE LIABLE FOR SPECIAL INCIDENTAL OR CONSEQUENTIAL DAMAGES ARISING FROM OWNERSHIP OR USE OF THIS PRODUCT OR FOR ANY DELAY IN THE PERFORMANCE OF ITS OBLIGATIONS UNDER THIS WARRANTY DUE TO CAUSES BEYOND ITS CONTROL SOME STATES DO NOT ALLOW LIMITATIONS ON HOW LONG AN IMPLIED WARRANTY LASTS AND OR DO NOT ALLOW THE EXCLUSION OR LIMITATION OF CONSEQUENTIAL DAMAGES S0 THE ABOVE LIMITATIONS AND EXCLUSIONS MAY NOT APPLY TO YOU THIS WARRANTY GIVES YOU SPECIFIC LEGAL RIGHTS YOU MAY HAVE OTHER RIGHTS WHICH VARY FROM STATE TO STATE For your protection in the event of theft or loss of this product please fill in the information requested below and KEEP in a safe place f
23. ey Press to select the desired audio reception feature options if available for DTV Main Sub 1 Sub 2 Sub 3 etc or for NTSC Stereo Mono and SAP This key will only operate the SDB Recall Key Use this key to alternate between two channels It will select the previous channel on your SDB as well as your TV and VCR This key functions differently on the DVD it selects the repeat function 0 Cursor Keys Use these keys to scan channels as directional arrows to highlight features and options and to navigate through the menu The Cursor Up Down keys move the cursor up and down within the SDB menu and selects next channel up and down on the SDB TV and VCR Using the Cursor Up Down keys in DVD mode activates the next previous or skip forward reverse function The Cursor Left Right keys move the cursor left and right within the SDB menu Use the Cursor Left key to delete or undo any numeric entry The Left Right keys operate only the SDB Qn Display Key Use this key to show the full channel and time banner display for the SDB VCR and DVD mode Pressing this key in the TV mode will display the Channel Number 22 Sleep Key Use this key with the 0 key to set the Sleep Timer on a Sanyo TV It does not function in any other mode G3 V Guide Key Use to access the parental control restrictions for viewing movies and TV programs Reference page 20 for detail operation 10 4 VCR DVD Keys Use
24. f Dolby Laboratories Contains iType font rendering technology from Agfa Monotype Corporation The Type software used in this product are under license from Agfa Monotype Corporation and cannot be extracted for any other use CA ZENTEK is a federal registered trademark of Zentek Technologies Inc Understanding the DIR 2000 s Features Analog and Digital Signals Analog Traditionally televisions have received signals sent broadcast over the airwaves or via cable CATV These signals included the carrier wave and the picture and sound data The picture and sound information is superimposed upon a carrier wave by varying the signal frequency and the signal amplitude This varying signal method is also known as ANALOG The television tuner selects the channel and decodes these sig nals and the television uses the decoded data to recreate the picture and sound Digital The SDB receives DTV signals sent through the air as well However the digital signals are encoded differently The digital signal represents the picture and sound information as zeros and ones Both analog and digital transmissions are limited to six megahertz of bandwidth per channel However digital signals are compressed made to fit in a much smaller space therefore more data can be transmitted within the same six megahertz bandwidth This allows the digital signal to contain data as well as the picture and sound The digital signal could contain information
25. g will fit into the power outlet only one way This is a safety feature If you are unable to insert the plug fully into the outlet try reversing the plug If the plug should still fail to fit contact your electrician to replace your obsolete outlet Do not defeat the safety purpose of this polarized plug Do not overload wall outlets extension cords or integral convenience receptacles as this can result in a risk of fire or electric shock 6 Power supply cords should be routed so that they are not likely to be walked on or pinched by items placed upon or against them paying particular atten tion to cords at plugs convenience receptacles and the point where they exit from the product Cleaning 7 Before cleaning unplug the unit from the wall outlet Do not apply liquid clean ers or aerosol cleaners directly to the unit Use a dry cloth for cleaning Service amp Repair 8 Unplug the appliance from the wall outlet and refer servicing to qualified service personnel under the following conditions A If the power cord or plug is damaged or frayed If liquid has been spilled into the appliance If the appliance has been exposed to rain or water If the appliance has been dropped or the cabinet has been damaged If the appliance exhibits a distinct change in performance If the appliance does not operate normally by following the operating instructions adjust only those controls that are covered in the operating instructions Imp
26. he grounding system of the building as close to the point of cable entry as practical Hooking Up Outdoor Antenna LIGHTNING PROTECTION FOR YOUR ANTENNA AND SET AS PER NATIONAL ELECTRICAL CODE INSTRUCTIONS 4 Ifan outside antenna is connected to the receiver be sure the antenna system is grounded so as to provide some protection against voltage surges and built up static charges Article 810 of the National Electrical Code ANSI NFPA 70 provides information with respect to proper grounding of the mast and sup porting structure grounding of the lead in wire to an antenna discharge unit size of grounding conductors location of antenna discharge unit connection to grounding electrodes and requirements for the grounding electrode An outside antenna system should not be located in the vicinity of overhead power lines or other electric light or power circuits or where it can fall into such power lines or circuits When installing an outside antenna system extreme care should be taken to keep from touching such power lines or cir cuits as contact with them might be fatal Plug in the power cord 5 This product should be operated only from the type of power source indicat ed on the marking label If you are not sure of the type of power supply to your home consult your product dealer or local power company This product is equipped with a polarized alternating current line plug a plug having one blade wider than the other This plu
27. ipment can be connect to either set of jacks 2 m Make sure all cable connectors are fully seated on jacks a Always match cables according to the colors on the jacks VCR Need help ET Visit our Web site at www sanyociv com 2 3 Connect the SDB output jacks to the TV Audio L R input jacks and S Video input jack Connect VCR A V output NOTES jacks to the TV no A N input jacks e For input and digital output connections refer to the Quick N Easy Startup Guide Connecting Diagrams DO NOT connect VCR DVD RF output to the RF Input of the SDB See page 18 figure 46 Resetting the SDB Use this feature to return all customer adjustable controls to the original factory settings 1 Press RESET key on the remote control once the on screen message appears 2 Press RESET key again to cancel all customized settings and return to factory settings NOTE The SDB will return to the Initial power on procedures Channel Search Monitor Type Selection and Auto Clock Day Setup process Factory Default Settings Channel Search lt 24 264 2 Reset with initial setup procedures Monitor Type Selection Reset with initial setup procedures Clock Day orsa eames Reset with initial setup procedures Aspect Ratio uu ue ez 4 3 Figure 59 Reset the SDB PIX SHAPC sakes cto wets NTSC Normal DT V Normal for 4 3 Reception 16 9 Reception and 16 9 Aspect LetterBox for 16 9
28. nless specifically stated otherwise in this warranty For customer assistance please visit www sanyoctv com or call toll free 1 800 877 5032 THIS WARRANTY IS VALID ONLY ON SANYO PRODUCTS PURCHASED AND USED IN THE UNITED STATES OF AMERICA EXCLUDING ALL U S TERRITORIES AND PROTECTORATES THIS WARRANTY APPLIES ONLY TO THE ORIGINAL RETAIL USER AND DOES NOT APPLY TO PRODUCTS USED FOR ANY INDUSTRIAL PROFESSIONAL OR COMMERCIAL PURPOSE THE ORIGINAL DATED BILL OF SALE OR SALES SLIP MUST BE SUBMITTED AT THE TIME WARRANTY SERVICE IS REQUESTED subject to the OBLIGATIONS above and the EXCLUSIONS below SANYO MANUFACTURING CORPORATION SMC warrants this SANYO product against defects in materials and workmanship for the periods specified below SMC will repair or replace at its option the product and any of its parts which fail to conform to this warranty The warranty period commences on the date the product was first purchased at retail UNIT EXCHANGE PARTS 90 DAYS 1 YEAR EXCLUSIONS This warranty does not cover A the adjustment of customer operated controls as explained in the appropriate model s instruction manual or B the repair of any product whose serial number has been altered defaced or removed This warranty shall not apply to the cabinet cosmetic parts or batteries This warranty does not apply to uncrating setup installation removal of the product for repair or reinstallation of the product after repair This warranty do
29. ommend approved carts and stands or shelf and wall mounting instructions An appliance and cart combination should be moved with care Quick stops exces Sive force and uneven surfaces may cause the appliance and cart combination to overturn 2 Slots and openings in the cabinet and in the back or bottom are provided for ventilation To ensure reliable operation of the appliance and to protect it from overheating these openings must not be blocked or covered The openings should never be covered with a cloth or other material and the bottom openings should not be blocked by placing the unit on a bed sofa rug or other similar surface This appliance should never be placed near or over a radiator or heat register This appliance should not be placed in a built in installation such as a bookcase unless proper ventilation is provided 3 Do not expose the appliance to rain or use near water for example near a bathtub swimming pool kitchen sink in a wet basement etc EXAMP T ACCOR ELECTI dhei ANSI N Ci AM E IE Bee be Di Wes De ade EE ye a1 mu LPE Pd ee LIBELLI F E a eC ee IAE Ej ge Oi Coe Let FS HE SE Tis HE E F HE uATE AL ELE DTEALO OBE Note to CATV system installer This reminder is provided to call the CATV system installer s attention to Article 820 40 of the NEC that provides guidelines for proper grounding and in particular specifies that the cable ground shall be connected to t
30. only major channels This list can be customized by deleting unwanted channels The Channel Map pages will reflect any changes made to the Channel Memory Scan List 1 Use the 8 2 keys to highlight the Scan Memory feature 2 Use the key to move to the channel number selection area highlighted The current channel number will appear DTV channels will show only the major channel number 3 Use the C 33 2 keys to select the unwanted channel For example Ch D35 4 Press Enter to remove the channel 5 To delete other channels repeat steps 3 and 4 above Operational Tip Press the CH Map key on ns momo to view a complete listing of T e MTM Need help the active channels Deleted channel numbers will be blue See Fro END ptt Me oar Wen sia Al page 16 for more detailed information on CH Map usage www sanyoctv com Figure 26 CHannel Map with deleted channels blue numbers sesosecceoceoocecceseooceececcooccesceccoceoccecceocecececesceoceeceoe SDB Menu Operation Channel x QuickTips m When Initial Channel is set to OFF the SDB will tune to the last channel selected when powered on Each time the channel is changed or selected the banner information display will appear on a m Use the DISPLAY key o switch the Banner on off Need help Visit our Web site at WWW Sanyoctv com Initial Channel The SDB can be programmed to tune to your favorite channel each time i
31. or your own personal records Model No serial No Located on back Date of Purchase Purchase Price Where Purchased LL
32. ote PIX SHAPE key allows you to quickly access the Pix Shape feature 2 a f Pix Shape did not change the image appearance make sure you are receiving a digital signal and the correct feature setting is selected Need help Visit our Web site at WWW sanyoctv com 12 Picture Category The picture feature allows you to change and adjust the on screen image by changing the aspect ratio pix shape and scan mode Please note that the adjustable menu options depend on the current tuner channel selection DTV or NTSC and signal reception Selecting the Picture Aspect Ratio Width to Height for DTV Channels 1 Press MENU key for on screen display 2 Use the 59 amp 2 keys to select the Picture Category 3 Use the C 33 G I keys to highlight the Aspect Ratio feature 4 Press the key 5 Use the C 33 GEP keys to select the desired option 4 3 or 16 9 Press ENTER NOTE Normal is the only option available for NTSC channels Figure 19 Aspect Ratio Selecting the Pix Picture Shape for DTV Channels 1 Use the amp 33 2 keys to highlight the Pix Shape feature 2 Press the 5 key 3 Use the 5 2 keys to select the desired option LetterBox Cropped Stretch or Expand Press the ENTER key Figure 21 Expand Setting 4 3 Reception amp 16 9 Aspect Ratio 16 9 Reception amp 16 9 Aspect Ratio Figure 20 Letterbox Setting 16 9 Reception amp 4 3 Aspect
33. perate my SDB or other equipment D Press the SDB or other Does the remote control work now mode keys on the Remote Yes Another mode was selected Press the appropriate key to operate the different types of Control Then try it again equipment Remote must be programmed Refer to Quick N Easy Be sure to point the remote No Replace the batteries or confirm that they are properly installed control at the equipment Index Analog tuner 6 Antenna refer to Quick N Easy Aspect ratio 4 7 12 Audio reception 19 A V jacks 21 Brief banner 4 8 14 Category tabs 4 Channel map 8 10 13 16 17 Channel scanning 4 13 17 18 Channel search 4 10 13 Channel selection 9 17 18 Clock day setup 8 15 Closed captioning 9 22 Digital audio output 8 15 Digital tuner 6 Direct channel selection 4 18 Express channel 17 Full banner 8 14 19 Initial channel 4 8 14 21 Major channel 14 17 18 19 Menu language 8 16 Minor Channel 14 17 18 19 Movie rating 20 NightScan 4 8 Output Jacks 6 Picture adjustment 12 Pix shape 7 9 12 Remote control 9 10 Remote programming refer to Quick N Easy Resetting the SDB 21 Scan mode 7 12 Sub channel 18 19 TV ratings 20 V Guide Parental Control 20 23 SANYO Digital Box Limited Warranty OBLIGATIONS In order to obtain warranty service the product must be delivered to and picked up at the user s expense u
34. rks Information Controls and Indicators Front Panel Indicators Power 480P DTV and 4 3 Front Panel Keys Power Channel up down Enter Menu Cursor left right Reset CPU Remote Control Keys Mode Selection Power Display 0 9 number keys Enter Caption Menu Recall Audio Pix Shape CH Map Tuner V Guide Sub Channel Volume Cursor left right Channel Cursor Up Down Reset factory settings Auxiliary control keys Jacks and Connectors 9 9 99 9 9 9 NTSC Input F Connector 75 ohm DTV ATSC Input F connector RF Output F connector with Ch3 4 switch 2 sets Audio Video Outputs A V 1 A V2 2 S Video Outputs S 1 S 2 1 Component Output Y Pb Pr 1 Digital Audio Output Optical S P DIF or PCM Accessories Included Multimedia Remote SDB TV VCR DVD Coaxial RF Cable Audio Video Cable phono type S Video Cable Component Cable Quick N Easy Startup Guide Size and Weight approximately Size Horizontal Dim Width 13 1 in 332 7mm Vertical Dim Height 2 7 in 69 1mm Depth Dim Thickness 11 0 in 278 1mm Weight 6 46 Ibs 2 9 Kg This product is subject to continuous improvement resulting in the design and Specifications to change without notice The weight and dimensions shown are approximate measurements Manufactured under license from Dolby Laboratories Dolby and the double D symbol are trademarks o
35. roper adjustment of other controls may result in damage and will often require extensive work by a qualified technician to restore the appliance to normal operation 1 m C co ug 9 Upon completion of any service or repair request the service technician s assurance that only Factory Authorized Replacement Parts that have the same characteristics as the original parts were used and that routine safety checks have been performed to determine that the appliance is in safe operating con dition Unauthorized substitutions may result in fire electrical shock or other hazards 10 Never add accessories that have not been specifically designed for use with this appliance as they may cause hazards 11 For added protection during a lightning storm or when the set is left unattended and unused for long periods of time unplug it from the wall out let and disconnect the antenna This will prevent damage to the set due to lightning or power line surges 12 Never push objects of any kind into this product through openings as they may touch dangerous voltage points or short out parts that could result in a fire or electric shock Never spill liquid of any kind on the product Contents Important Safety Instructions uui Em y cm e 2 Feature Setup Introduction Welcome to the World of Sanyo 3 perms the COCK Day wisi omens panes sangeet 15 Slo LR 4 A UE a addidit i Setting the Menu Language 16 laco ce aamcacgns ht
36. s e LetterBox picture i ith black b the t d bott Leu ERN etterBox picture image appears wi ack bars on the top and bottom ier ry eii of the screen m e Cropped the picture image right and left sides are cut off Figure 5 Aspect Ratio e Stretch picture image is horizontally enlarged to fill 16 9 screen e Expand 4 3 setting enlarges the picture image proportionally with minimal portion of top and bottom cut off to fill screen 16 9 setting enlarges the picture image proportionally to fill screen both vertically and horizontally providing a wide picture format These options will depend on the current signal reception and the following Aspect Ratio setting 4 3 Reception and 4 3 Aspect setting Normal 4 3 Reception and 16 9 Aspect setting Normal Stretch and Expand 16 9 Reception and 4 3 Aspect setting LetterBox and Cropped 16 9 Reception and 16 9 Aspect setting Normal Stretch and Expand Scan Mode Interlaced This is the term given to the dual field method of scanning Two separate fields of scan lines are created and interlaced together to produce a picture Progressive Progressive is the term given to sequentially scanned lines or non interlaced This is the method most commonly used in computer monitors Figure 7 Scan Mode NOTE When receiving an analog signal NTSC Normal will be the only option available for each of the Picture category features Understanding the DIR 2000 s Fea
37. s longer than the screen display simply use the cursor keys to scroll as needed Also this feature can be used as an express selection process to access channel numbers see page 17 The SDB Channel NightScan feature searches for new channels and adds them to the channel database This operation will be performed at random intervals during in active times This feature automatically updates only DTV channels The CHannel Map display depends on the following conditions If channel signals are not detected the Map page for that category DTV or NTSC will be blank The NTSC CHannel Map page will display either CATV channels or Off Air channels but not both During channel search the SDB will scan both types The SDB will automati cally detect the proper type to be displayed and used for the NTSC database for a maximum of 125 cable channels or a maximum of 68 VHF UHF channels VHF 2 13 UHF 14 69 NTSC channels depend on the type of signal connected to the NTSC RF input When the CHannel Map is displayed on the screen you can Figure 39 DTV CH Map press the TUNER key to switch between the categories DTV channels will show only the major channel number Using the Channel Map 1 Press the CH MAP key on the remote control once to display the CHannel Map page s u Pressing the CH Map remote key will display a blank page with cat egory tabs only if channel signals are not detected a When th
38. such as program guides Analog and Digital Tuners The DIR 2000 includes tuners to receive both analog and digital signals The digital tuner will receive digital channels The analog tuner can receive VHF channels 2 13 and UHF channels 14 69 or up to 125 cable channels Output Signals The DIR 2000 can output 4801 Interlaced and 480p Progressive component signals The dis play device you choose during initial setup determines which signals are available for output Figure 1 Output Options Choosing the Appropriate Connection Method If you are connecting the Sanyo Digital Box to Analog Jacks Digital Jacks an Advanced TV or component system use the SDB Component Video output jacks and the digital audio out or analog audio L R out on the back of the box E LESE n a aa ma na ws na AE m a aa n a a a a a n a ata n n a a EE t 4 l I T Otherwise connect your analog TV to the A V output jacks or to the Out to TV RF terminal on the SDB back The Main Menu The Main menu is divided into three categories Picture Channel and Setup These categories appear as tabs across the top of the display Each of these categories offers several features and various options for each feature The Features are in the left hand column and the options appear in the right hand column The available options will vary depending upon the type of signal being received and the type of output device you choose during the initial o
39. t is powered on such as your favorite news or sports channel 1 Use the amp 2 keys to highlight the Initial Channel feature 2 Press the key 3 Use the Gam keys to highlight On Press the ENTER key 4 Use the C 3 2 keys to select desired digital or analog Figure 27 lnitial Channel selected channel For example Digital Channel 43 Display Banner The Banner information will depend on the current tuner channel selection DTV or NTSC and current signal reception 1 Use the 428 GEP keys to highlight the Display Banner feature 2 Press the E29 key 3 Use the amp 3 amp 9 keys to highlight setting Full or Brief Press the ENTER key NOTES When the Display key is pressed the Full banner will appear regardless of the menu selection and remain on the screen until the Display key is pressed again Captions will not be displayed while the Full banner is on the Figure 28 Display Banner screen AAE ee NEC ft kpm SEPM nec e fon LC Trey Capa Cay D E WHL Opini Figure 29 DTV FULL Banner Display Figure 30 NTSC Full Banner Display Banner Information DTV Full Banner includes NTSC Full Banner includes Station ID number if available Station ID number if available DTV digital channel icon NTSC analog channel icon Major Minor channel number and tuner indicator D Clock time if set Day date if set Program Ti
40. the G4 Cz keys to highlight Manual The on screen Clock Day entry areas appear Press ENTER m To use the Auto Clock Day feature a local PBS station that is broadcasting an extended data service XDS signal must be received The Auto Clock Day searches for the transmitted signal and automatically sets the Clock Day a f no NTSC channel signals are found during the channel search process the SDB will automatically skip the Automatic Clock Day Setup process m During the Clock Day setup procedure only 6 Use the remote 0 9 number keys or 6 amp 3 keys to enter the proper clock time 7 Use the keys to highlight AM or PM 8 Press ENTER to set the time and move the cursor to the Day Setting entry area 9 Use the remote 0 9 number keys or amp 5 GEP keys to select the proper day date Then press the ENTER key Operational Tips Use the left gt key to clear any incorrect number entry The clock must be set before setting the day date Figure 34 Banner display with Clock Time Day Settings the POWER and DISPLAY keys are operational Figure 33 Day month day year Digital Audio Output Use this feature to choose the format of the digital DTV audio output signal PCM or S P DIF 1 Use the amp 3 amp 9 keys to highlight the Digital Audio Output feature 2 Press the key 3 Use the C 33 S2 keys to highlight option PCM or S P DIF
41. these keys to operate your VCR and DVD Remember the remote control must be programmed first Rewind 333 Fast rewinds VCR tape and fast skip reverse for DVD Play k Selects play mode Fast Forward amp amp Fast forward VCR tape and fast skip forward for DVD Record A Selects recording mode for VCR only Stop amp 2 Selects stop mode Pause Lii 3 Select pause mode Tracking Eia 3 Adjusts VCR head tracking and still frame step forward or reverse for DVD oe SDB Menu Operation General Menu Operation T 29 QuickTips Use the CURSOR keys to navigate through the menu Categories Features and Options The 5 E cur sor keys move the highlight to the left or right The 28 2 cursor keys move the highlight up and down l T Re nenill The Up and Down keys move the highlight in a continuous loop l disappear from the screen after approximately 30 seconds if no keys are pressed Press MENU key again to redisplay There are three on screen menu categories Picture Channel and Setup Selecting a Category and Feature Option 1 Press the MENU key for on screen display m The last adjusted feature is selected when returning to the menu on screen display 2 Use the amp 2 2 keys to select a category 3 Use the C53 keys to view features and options As each feature is highlighted available options will appear and a checkmark W will indicate the
42. tle if available Channel Number with tuner indicator C cable channels Clock time if set Day date if set Program Title if available Program Rating if available a Program Rating if available Caption Setting if set P t tt t Dolby D indicator if digital signal is received me Signal quality with meter DTV Brief Banner includes NTSC Brief Banner includes Station ID number if available Station ID number if available Major Minor channel number and Channel Number with tuner indicator C tuner indicator D cable channels Clock time if set Clock time if set SDB Menu Operation Setup Use the setup category to set the Clock Day Digital Audio Output and Menu Language features No settings required for System Information The menu setup feature and options listing will depend on the current Is QuickTips tuner channel selection DTV or NTSC and current signal reception m To see the time of day and date press the DISPLAY key the banner information l will appear on screen To set the Clock Day manually 1 Press MENU key for on screen display Use the 3 GE keys to select the Setup category BUG UD Full or Brief Clock display will be blank if the clock day has not been set 2 3 Use the C 33 amp P keys to highlight the Clock Day feature 4 Press the key 5 Use
43. tures Channel Category Features and Options Search Search is used to find and store in memory all active channels being received This includes NTSC and Digital DTV channels NightScan Search The NightScan feature automatically searches to keep the database fresh and updated with new DTV channels This occurs at random intervals during inactive times Please note that NightScan adds channels to the memory it does not delete or replace existing channels Initial Channel Figure 8 Selecting An Initial Channel The SDB can be programmed to tune to a specific channel each time it is powered on such as your favorite news or sports channel Display Banner ERI BHHHHMHHH nn WAIL Dupin Daly D 8 Figure 10 Full DTV Display Banner title the time and other TV settings concerning The Display Banner appears when you change channels and when you press the DISPLAY key It has two options Full and Brief The Full banner may include the station ID program picture and sound options The Brief banner may only include the station ID with tuner indicator C for Cable C34 D for Digital D43 05 or Blank for Off Air 13 and time if the clock has been set Figure 9 Display Banner Selection Figure 11 Full NTSC Display Banner METE Dh CE T urv XL WIL pini CHannel Map Pages These pages are basically charts of channel numbers The CHannel Map shows the available chan nels discovered
44. two choices the ATSC tuner and NTSC tuner 480P Indicator Indicates that the progressive video scan option is selected 4 3 Indicator Indicates the 4 3 option is selected for the aspect ratio Features and Specifications Convenient Features Dual Tuning Systems DTV terrestrial digital ATSC 18 formats NTSC analog Cable 1 125 VHF UHF Audio formats Dolby Digital for DTV and analog for NTSC NightScan automatically updates DTV channels Menu System Adjustments Picture adjustments Aspect Ratio 4 3 format and 16 9 format Picture Shape Normal Letterbox Cropped Stretch and Expand Scan Mode Interlaced and Progressive for 480i p televisions Automatic Channel Search for both tuners DTV and NTSC Channel Scan Memory Initial Channel Channel Display Banner Full and Brief Auto or Manual Clock setting Digital Audio Output S P DIF and PCM 9 999 gt gt gt 9 9 9 OM Trilingual Menu Options On Screen Displays OSD Channel Display Banner Information Full and Brief Channel Map listing of all channels Closed Captioning 9 9 XDS Extended data service station call letters title of show and rating Audio Modes DTV Main and Sub NTSC Stereo Mono and SAP DTV signal quality to aid antenna orientation V Guide rating limits Movies and TV guidelines Power Requirement Source AC 120V 60Hz Consumption Approximately 21 Watts Tradema
45. ty Features Value and Styling To The Owner We are aware that you are eager to begin using your new SDB However we also understand that to enjoy it fully you must first understand its many features While this owner s manual is intended to fully acquaint you with the SDB s operation it is not meant to be read from cover to cover Instead it has been carefully arranged for easy use so you can quickly move on to enjoying your SDB Glossary Aspect Ratio The aspect ratio of a television picture is the relationship of the width to the height The standard Analog aspect ratio is 4 3 The 16 9 aspect ratio appears wider and shorter more closely resembling a movie theater screen image ATSC Advanced Television Standards Committee Brief Banner Station ID channel number and time display that appears when changing channels Brief Channel Number Display The small display that appears when entering channel numbers Category Tab Area Tabs are located at the top of each main on screen display Menu CHannel Map or V Guide Channel Search This process establishes the basic database The search process looks for available channels in both tuning systems DTV and NTSC If a signal is present the channel is added to the database The database will be entirely reset anytime a full Channel Search is completed If the search is started from the Menu then the display returns to the Menu after the search is finished
46. utput device setup Conventional TV or Advanced TV Figure 1 Accessing the Main Menu You access the Main menu by pressing the MENU key on the remote control or front panel Figure 3 Main Menu Categories RESET Ce EE IE SE EE EOD M v JJ C TUNER CH GHP Inthe event ofa Ei ten key B ftware lock m software lockup mm a tem am au cuia 050 MN e uu e use a paper clip to es reset the SDB Menu Labeling When a category or option is selected its label will have a yellow highlight When a feature is selected not only will its label be highlighted but it will also point to the available options that appear in the right hand column The active option will have a checkmark w beside its title Figure 5 Navigating the Menu System Use the CURSOR keys to navigate through the menu Categories Features and Options The lt gt cursor keys move the highlight to the left or right The ti S28 cursor keys move the highlight up and down The Up and Down keys move the highlight in a continuous loop Picture Category Features and Options CATEGORIES Aspect Ratio The aspect ratio of a television picture is the relationship of the width to the height The standard Analog aspect ratio is 4 3 pronounced four to three The 16 9 aspect ratio appears wider OPTIONS more closely resembling a movie theater screen image FEATURES Pix Shape The image can be viewed in the following on screen format
47. y Press this key to display the on screen menu on your SDB and Sanyo Television This key will not operate your VCR other brand TV or DVD player Enter Key Press this key when using the SDB menu to choose the selection channel number entry and on screen menu D Mute Key Press this key to instantly turn off the TV sound Press again to restore the sound to its previous level 2 Caption Key Press to select the Closed Captioning modes for your DVD and Sanyo TV only Captioning is only received through the NTSC analog tuner ee Continued on page 10 9 Using the Remote Control Continued 3 TV Mode Key Press to select the operating mode for your TV Must be programmed Refer to Quick N Easy Startup Guide DVD Mode Key Press to select the operating mode for your DVD Must be programmed Refer to Quick N Easy Startup Guide 5 Reset Key Press twice to restore all customer adjustable controls to the original factory settings A display warning will appear Press again to begin channel search procedure Volume VOL Up Down Keys Use the keys to adjust the sound level on your TV 7 CH Channel Map Key Press this key to display the channel map page The map page will display either DTV digital chan nels or NTSC analog channels cable or VHF UHF Currently selected channel number will be highlighted in yellow Deleted channels will be blue Audio K
Download Pdf Manuals
Related Search