Sanyo CA21KS2 User's Manual
Contents
1. You may connect the audio and video output terminals of the DVD player or VIDEO recorder to the input terminals of the TV set to enjoy the DVD and VIDEO programs INPUT MONITOR OUT W To watch m When a monophonic video recorder is sine video input connected to this product connect the audio picture output terminal of the video recorder to the L left TAHE REE ae select AV1 audio input terminal of the TV set position by To Audio Input L AV1 pressing a iii nae aan To make sure the colour system of the TV set is consistent with the signal of your video recorder if necessary select a matching Ja AV1 system The colour system set in AV mode can be stored automatically oes C III Mee Denes E When the stereo signal is inputted from the right When the audio signal from the VCR is stereo and left audio input terminals each time the be sure to connect the right and left channels to SURROUND button is pressed or selection of the respective right and left AUDIO IN terminals On screen Menu surround mode is changed Then select STEREO channel of the audio as follows SURROUND ON and channel in the TV set with the remote control SURROUND OFF VA B button Each time the VAB button is pressed the AV Stereo mode is changed as follow SURROUND ON SURROUND oF 7 STEREO MONO l Note The effect of surround is not obtained although the switching of surround is displa2. 6 gt 6 AUTO PAL A 6 6 Note Colour system is displayed according as Colour system option General Operation O On Timer Continued Press the VOLUME or button The set time will be increased or decreased by 10 minutes each time the button is pressed the maximum time which can be set is 24 hours Use Direct Programme Selection to insert programme position for when TV is switched on by ON TIMER see page 7 M if no operation is performed after the TV has been switched on by the ON TIMER such as if you are not at home the TV will be automatically switched off after approximately 2 hours E f the TV is already switched on when the time set for the ON TIMER has been reached only the programme position will be changed to the set programme position E Cancelling ON TIMER To cancel the ON TIMER press the VOLUME or button to set it to ON 0 00 while the ON TIMER screen is shown Switching off the TV by pressing the Mains ON OFF button will also cancel the ON TIMER settings Colour and Sound System O Setting of the Sound System To set the sound system make it during Semi Auto Tuning or Manual Tuning mode When the sound is not clear or no sound is pro duced on a programme number position select sound system repeatedly until the optimum sound is obtained Refer to Broadcast Transmission System List indicated by the last of this page in a setup of Sound System To select sound system E
3. Bass Expander To activate bass expander function Sound System To select optimum sound system BG DK M Surround To activate Surround function Menu To Call up the TV MENU Q Off Timer The OFF TIMER will switch off the TV automatical ly after 30 minutes 1 hour 1 hour and 30 minutes or 2 hours Press the TIMER button 1 OFF 0 00 Press the VOLUME or button to select the time period mM Just one minute before switching off the TV OFF 0 01 will be display on the screen M To cancel the OFF TIMER select OFF 0 00 by pressing the VOLUME or button E The OFF TIMER cancels when the TV set is turned off or if a power failure occurs O On Timer When the ON TIMER is set TV will automatically be switched On to the selected programme position when the specified time has elapsed Press the TIMER button twice ON 0 00 2 ON TIMER setting mode RI Programme position for when TV is switched ON bv ON TIMER O Setting of the Colour System Normally set the colour system to AUTO if the clear picture cannot be obtained even when the broadcasting or AV signal is received press the RECALL COLOUR SYSTEM button repeatedly until the optimum image can be produced Refer to Broadcast Transmission System List indicated by the last of this page in a setup of Colour System Each time the RECALL COLOUR SYSTEM but ton is pressed colour system changes as follows
4. CA21SF1 CP21SF1 580 W x 465 H x 381 D mm Model CA21KS2 CP21KS2 CA21KS2K CP21KS2K 580 W x 465 H x 326 D mm Model CA21YS2S CP21YS2S 598 W x 465 H x 396 D mm Model CA21X828 CP21X828 654 W x 467 H x 385 D mm Weight Model CA21SF1 CP21SF1 approx 20 0 Kg Model CA21KS2 CP21KS2 CA21KS2K CP21KS2K approx 19 7 Kg Model CA21YS2S CP21YS2S approx 20 1 Kg Model CA21XS2S CP21XSS approx 19 6 Kg Specifications subject to change without notice 19 Helpful Hints Problems Solutions Before requesting service check the following chart Problem Check these Conditions Try these solutions No picture e Check if TV is plugged in no sound Try a different channel if OK probably station trouble Poor picture e Adjust Brightness or Contrast control sound OK e Adjust Fine Tuning See page 9 e Check aerial connection e Adjust Colour or Tint control Adjust Fine Tuning See page 9 Check aerial connection Is the programme in colour Try a different channel G Select other colour system See Setting of the Colour System on page 8 Weak pict Check aerial connection on back of TV set Hn a Check aerial for broken wires Re orient aerial Sound Mute may be on Press the SOUND MUTE button on the remote control Adjust Volume May be station trouble Try a different channel G Select other sound system See Setting of the Sound System on page 8 9 Remote Control e Check batterie
5. desired channel into memory MisELEcT W apsust MBack M EXIT To preset other Programme Positions repeat steps 5 7 Press the MENU button to return to normal TV display 12 Q Channel Copv This function can be utilized after Automatic Press the DIGIT button 1 button and then Tuning 2 button on the remote control to enter For example to copv a TV channel on pro programme number 12 For example to gramme position 2 onto programme position enter programme number 3 press 3 6 button only 1 Select programme position 2 2 Enter to SEMI AUTO or MANUAL tuning The two TV channels will now have changed mode Refer to page 11 places Select POSITION with the Programme UP or DOWN button Select position 6 with the VOLUME or button MODE SEMI SEARCH START SYSTEM AUTO O Skip Channel Set and cancel Select MEMORY by pressing the Programme UP or DOWN button When there is a position you do not use Position 4 for example by setting the SKIP Channel function it Press the VOLUME 0r punon 40 is possible to jump over this position when you are EE selecting a channel using the Programme Press the MENU button to return to normal UP DOWN or CHANNEL SCAN button TV display 3 O Channel Swapping B 4 9 Use this channel swapping feature to swap the Skip A channels between two stored programme position This feature is particularly
6. 3 Stand by and Power Indicator 9 Audio Input Jack Left AV2 4 Programme UP DOWN 10 Video Input Jack AV2 5 VOLUME 6 MENU Remote Control Transmitter TIMER button TV AV TV AV Selector WW F RECALL COLOUR SYSTEM button r S i MUTE button Programme Selector button ALTERNATE button Programme UP button CHANNEL SCAN button DIGIT button SWAP button VOLUME button VOLUME button STEREO MONO button PICTURE MODE button MENU button SURROUND button Programme DOWN button BASS EXPANDER button i sass i SOUND MODE button SANYO JXPSG SOUND SYSTEM button O Battery Installation of the Remote Control Transmitter 1 Open the battery cover 2 Install two AA 1 5 volt batteries so that the and marks on the batteries match the and marks inside the unit 3 Close the battery cover Note Replace the batteries when the TV set is showing the following symptoms Operation is unsteady or erratic sometimes the TV set does not work with transmitter Discharged batteries may leak and damage the unit The normal life of batteries should be from nine to ten months 7 General Operation O Remote Control Operation e O m D e e 6 Standbv Power on To switch the TV on and off For shutting off a power supplv completelv Press the Mains ON OFF button on the front control of TV set Sound mute To switch t
7. ANDER SEROUND OE on and off im 7 SURROUND Operates SURROUND on and off E To return to Main menu press the ALTERNATE Note When the stereo signal is inputted from the button right and left audio input terminals in the AV mode W To return to normal TV mode press the MENU surround mode is l changed as tallow button Or will automatically return to normal SURROUND ON and SURROUND OFF TV mode after 20 seconds 11 Up to 256 broadcast stations in vour reception area can be stored in the electronic memorv There are three wavs of tuning as follows 1 Automatic Tuning the basic way All receivable channels are automatically tuned in and memorized in consecutive programme position 2 Semi Auto Tuning Use to preset a receivable channel in any desired programme position e g the position with the same number as the channel 3 Manual Tuning Manually tune a channel if it cannot be automatically tuned such as when the signal is poor 0 Automatic Tuning Press the MENU button for MAIN menu display Select PRESET by pressing the Programme UP or DOWN button PICTURE AUDIO LANGUAGE Press the VOLUME or button for PRESET menu display On entering PRESET display Automatic Tuning will be selected initially SEARCH START POSITION 1 SYSTEM AUTO SIF BG Select SEARCH by pressing the Programme UP or DOWN button MODE AUTO POSITION 1 SYSTEM AUTO Press the VOLUME
8. Instruction Manual Colour Television Flat Screen Multi System CATV Hyper Band 256 Programmes with Automatic Tuning AV Stereo Sound System DVD Input with Video Component SANYO CA21XS2S CP21XS2S CA21YS2S CP21YS2S CA21KS2 CP21KS2 CA21KS2K CP21KS2K CA21SF1 CP21SF1 personnel placed on the television Never stand on Jean on or push sud denly the television or its stand You should pay special attention to children Serious injury may result if it should fall Do not place vour television on an unstable cart stand shelf or table Serious injurv to an individual and damage to the television may result if it should fall At installation of the unit the plug of power cord shall remain accessible and_readily operable to disconnect the unit from the wall outlet When the television receiver is not used for an extended period of time it is advisable to discon nect the AC power cord from the AC outlet Avoid exposing the television TEIE receiver to direct sunlight and e i a 4 other source of the heat Mi a fila Do not stand the television AN Xo receiver directly on other prod EEN ucts which give off heat E g video cassette players audio amplifiers Warning and Caution High voltages are used in the operation of this television receiver Do not remove the cabinet back from your set Refer servicing to qualified service Do not drop or push objects into
9. NITOR OUT AV1 DVD 1 Ce bing from AV1 or AV2 input terminals To Audio Output R lt T M lo record TV programme select TV mode by pressing the TV AV Selector and record the desired programme To Audio Output L v A E 5 To Video Output To video and audio inputs 15 TV mode M To dub video from the AV1 terminal input select AV1 position and by pressing the TV AV Selector l m VCR for Recording AV1 O AV Connection To the Aerial Socket The AV apparatus can also be connected to the aerial socket of your TV receiver PLAYBACK Presetting to watch the video input 1 Playback the VCR 2 Tune a VCR playback in programme position ee that you want See Semi Auto Tuning and VCR for M Tuni 11 anual Tuning on pages 11 e Aerial Socket playback ANT 750 For further details concerning this connection and adjustment refer to the operating instructions for the AV equipment 17 Aerial Connection O Connecting Outdoor Aerial Connect the cable with a plug from a UHF or VHF aerial to the aerial socket on the cabinet back Outdoor Aerial TR 2 ia Aerial Cable Aerial Socket ANT 750 For all aerial circuit problems please consult vour local dealer Care and Cleaning The surface of the cabinet can be damaged if not properlv maintained Manv common household aerosol spravs cleaning agents solvents and polishes will cause permanent damage to
10. Press the SOUND SYSTEM button to select the sound system directly The sound system will be memorized automatically Or 1 Select SIF with the Programme UP or DOWN button in the Semi auto or Manual Tuning mode Then press the VOLUME or button to select a optimum sound system 9 Colour and Sound System O Setting of the Sound System Semi Auto or Manual Tuning mode Broadcast Transmission System List Colour Sound Middle Union of Arab Emirates East Kuwait Oman Qatar Yemen Bahrain etc Indonesia Malaysia PAL B G Asia Singapore Thailand etc MseELEcT W ADJUST BBack M EXIT BG Iae DK M Saudi Arabia Iraq Iran Lebanon etc SECAM B G 2 To enter a sound system selection into the memory select MEMORY and press the Russian Federation etc SECAM D K VOLUME or button EN in l Australia 5 5MHz 6 0MHz 6 5MHz 4 5MHz Hongkong Pal i MiSELECT W apsust MBack M EXIT Picture Adjustment SHARPNESS Adjusts picture detail ARIGIEFAEEE WHITE TONE Adjusts white balance eel FINE TUNING Fine tuning in case of weak SHARPNESS broadcast signal or poor reception Only displayed in TV mode Will not be displayed in AV mode MseELEcT M ADJUST BIBACK B Ex O Basic Picture Adjustment Operation Page 1 Page 2 Press the MENU button for MAIN menu display The 2nd page is not displayed when there is no TINT adjustment AUDIO Pictur
11. Video Component Input Terminal Y Cb or Cr Connect the component output terminal on MONITOR OUT your DVD player to the component video input ANYDVD terminal of this product NOTE When a sig gt nal of Y Cb Cr Y Pb Pr is received the output To Input Terminal CR o lt a ava signal from monitor output terminal will be cor gt responding but without colour black and gt o IL To Audio Input L AV1 white image SDD o To Terminal Y M To watch a program in this connection a status select AV1 DVD 28 gt AVI m AVI DVD m AV2 model TV mode Optional TQIL M Make sure the component video terminal Y C or Cr n m l Video DVD Plaver is connected correctiv 16 O Connecting To the Front AV2 Input Jacks Optional Model It is convenient to use the AV input jack on the front panel for equipment that is often connected and disconnected AV2 so ha le To Audio Input L IM To watch the Front AV2 video input picture select AV2 position by pressing the TV AV AV2 Selector To Video Input AV2 To Audio Input R AV2 e fd a Video DVD Player Model CA21SF1 CP21SF1 are not equipped with Front AV2 input terminal O Connecting To the Monitor Output Jacks The picture signal being displayed on the TV screen is output through the Monitor Output Jacks Use these terminals to record TV broadcasts and for video dub INPUT MO
12. button to start channel tuning After all receivable channels have been found and stored the TV set automatically returns to pro gramme position 1 M The Automatic Tuning operation can be cancelled at any time by pressing the Programme UP or DOWN button Tuning of the Channels O Semi Auto Tuning and Manual Tuning Press the MENU button for MAIN menu display Select PRESET by pressing the Programme UP or DOWN button Press the VOLUME or button for PRESET menu display On entering PRESET display Automatic Tuning will be selected initially Select SEMI or MANUAL by pressing the VOLUME or button Select SEARCH by pressing Programme UP or DOWN button the MODE SEMI POSITION SYSTEM Semi Auto Tuning Press and release the VOLUME or button to search for required TV station Once a station is located tuning will automatically stop Continue till desired channel is located 6 AUTO MODE SEMI POSITION SYSTEM Manual Tuning Press and hold the VOLUME or button to search for required TV station 6 AUTO MODE MANUAL POSITION SYSTEM The VOLUME button will move tuning toward the higher frequencies and the VOLUME button will move tuning toward the lower frequencies Once desired channel is located select 9 AUTO MEMORY by pressing the Programme UP or DOWN button Press the VOLUME or button to enter the
13. e Adjustment Item pepe COLOUR Adjusts colour intensity site BRIGHT Adjusts picture brightness CONTRAST Adjusts picture contrast TINT Adjust colour tints Displayed only on NTSC or NTSC4 43 system signal reception MAIN MENU SELECT W ENTER M EXIT 10 Picture Adjustment O Basic Picture Adjustment Operation Continued When PICTURE is not selected select W To return to Main menu press the PICTURE with the Programme UP or ALTERNATE bution DOWN button Mm To return to the normal TV mode press the MENU button Or will automatically return to AUDIO the normal TV mode after 20 seconds PRESET EANGUAGE Select desired control by pressing the Programme UP or DOWN button Press the VOLUME or button to display Picture Adjustment menu COLOUR CONTRAST BRIGHTNESS CONTRAST SHARPNESS WHITE TONE FINE TUNING Press the VOLUME or button to alter settings Audio Adjustment Audio Adjustment Menu O Audio Adjustment Operation Press the MENU button for MAIN menu TREBLE diplav BALANCE play BASS EXPANDER OFF SURROUND OFF Select AUDIO by pressing the Programme i 7 UP or DOWN button MseLEcCT IB ADJUST BIBACK M EXIT PICTURE Audio Adjustment Item PRESET LANGUAGE BASS Bass Adjustment Press the VOLUME or button for Audio BALANCE Left right speaker volume balance adjustment TRENIE BALANCE BASS EXPANDER Operates BASS EXP
14. eaning 17 Specifications 18 Helpful Hints Problems Solutions 19 Plug amp Play Press any of the control buttons to make the ending message disappear Or will automatically return to normal TV display after 10 seconds 2 This procedure only appears at the first switch on time E If no TV stations are found the display shown below will appear Please check if the antenna is connected properly NO STATION PLEASE CONNECT ANTENNA PLUG If it isn t connected properly connect antenna and Automatic Tuning will be reset 4 Each button listed in this section has the same function as it s corresponding button on the remote control Front Control Model CA21XS2S CP21XS2S ve LU Press to open 3 2 VIDEO L AUDIO R ii i ii E F a T zH 7 6 5 4 10 9 8 Model CA21YS2S CP21YS2S ka Press to open 1 Mains ON OFF Button 7 TV AV Selector 2 Remote Control Detector 8 Audio Input Jack Right AV2 3 Stand bv and Power Indicator 9 Audio Input Jack Left AV2 4 Programme UP DOWN 10 Video Input Jack AV2 5 VOLUME 6 MENU Each button listed in this section has the same function as it s corresponding button on the remote control Front Control Model CA21KS2 CP21KS2 CA21KS2K CP21KS2K kl AD Pull to open 76 5 4 32 1 1 Mains ON OFF Button 7 TV AV Selector 2 Remote Control Detector 8 Audio Input Jack Right AV2
15. g and Manual Tuning 11 Channel Copy 055 12 Channel Swapping 12 Skip Channel Set and Cancel 12 13 O Automatic setting up channels This TV set provides a self automatic tuning and sorting system function called Plug amp Play It automatically begins searching and storing of all available channels when switching on the TV set for the first time g Let s Start l Connect power cord of the TV set to a wall outlet and turn on the TV set bv pressing the Mains ON OFF button Self automatic tuning svstem will be started as follows I AM SEARCHING ALL PROGRAMMES PLEASE WAIT AUTO SET UP COMPLETED HAPPY VIEWING 1 gt After completing this procedure the programme position 1 is selected and the ending messages on the screen Note The Plug amp Play can be cancelled at any time by pressing the MENU button Contents Setting of the Private Position 13 Setting of the OSD Language 14 Connecting Other Equipment 14 Connecting to the Rear AV1 Input JORO gt e nie at as aia dane esate 14 15 Selecting the Colour System in AV MOG sepsu iaeiae hela we ao 15 Connecting to a DVD Player with AV1 DVD Video Component output terminal 15 Connection to the Front AV2 Input JAOKS 2 wi e b nga eee coe 16 Connecting to the Monitor Output JACKS siket eae 16 AV Connection to the Aerial Socket 16 Aerial Connection 17 Care and Cl
16. he sound from the speakers The sound changes as follows normal mute X Timer To Adjust Timer function OFF TIMER ON TIMER ON PROGRAM Recall Colour svstem selector To displav the programme information on the screen It also operates as Colour system selector if the clear picture cannot be obtained even when the broadcasting or AV signal is received Colour System and Sound System SIF could be changed in SEMI AUTO and MANUAL TUN ING operation Direct programme selector For direct access to programmes using the 0 9 numeric button For selection of analogue programme position 10 255 Example for programme position 17 Press the Digit button press 1 button Press 7 button For programme position 125 Press the Digit button twice Press 2 button Press 5 button For programme position 225 Press the Digit button 3 times Press 2 button Press 5 button Alternate To select the previous position and the present position Volume Up Down To adjust the sound volume level Also operates as left 4 and right cursor Programme down up To select the next programme number or previous programme number Also operates as up A and down cursor Swap To swap the channels between two stored programme positions Sound Mode To select Sound mode PERSONAL MUSIC TALK NORMAL Stereo Mono Button Picture Mode To select Picture mode PERSONAL DYNAMIC NATURAL ECO GAME
17. s Replace batteries will not work Check if TV set is plugged in Aim remote control towards front of TV Cannot select or Channel may be removed from memory Add channel to memory manually scan some channels See Skip Channel Set and Cancel on page 12 13 Check aerial connection No colour Picture OK No sound or poor sound Blue screen with AV1 or AV1 DVD or AV2 Check AV connection Press the TV AV Selection button is displayed Check external equipment Switch on external equipment cc screen with Check to see if channel is set as the Private Position See Setting of the and programme me position displayed Private Position on page 13 Cabinet makes e This is a normal condition during warm up and cool down of the plastic popping sound cabinet parts Keep away your TV set from magnetic source then turn off your TV set and Colour Spot On disconnect TV s power cord from AC outlet keep this condition about 30 60 The CRT minutes and turn on again your TV set if time is reach If colour spot is not disappear after this solution have done please contact your local dealer The following faults are not caused by the receiver GHOSTS Reflections of signals from mountains or high buildings will cause multiple images called Ghosts These abnormal conditions can be reduced to minimum by repositioning aerial or by installing new one suited for your area INTERFERENCE In
18. terference may be caused by electrical appliances car ignition systems etc This should normally be a temporary condition but should this interference persist contact your dealer SLANT If the picture of TV set is not properly horizontal slant try to change face direction of your TV set This case may be caused by geo magnetic on your place where you live MOMMA II l IK AN MUN WT NT HL l IN Vala NN LL MANN l tivi l l
19. the fine surface 1 Unplug the power cord before cleaning the Television 2 Clean the screen with a soft cloth dampened with glass cleaner or warm water 3 Clean the cabinet with a soft cloth dampened with a mild household detergent and warm water Drv thoroughly Note NEVER spray liquids on the screen because they can run down and drip onto the chassis This may cause component failure not covered under Warranty Specifications Power Source AC 127 240 Volts 50 60Hz Colour System PAL NTSC4 43 NTSC PAL 60Hz Sound System B G D KK M M Channel Coverage VHF E2 E12 A2 A13 R1 R12 J1 J12 K1 K9 UHF 21 69 A14 A69 J13 J62 CATV S1 S41 X Y Z Z 1 Z 2 Aerial input impedance 750 Audio output RMS Model CA21YS2S CP21YS2S CA21KS2 CP21KS2 CA21SF1 CP21SF1 CA21KS2K CP21KS2K 5W 5W Model CA21XS2S CP21XS2S 10W 10W Speakers Model CA21YS2S CP21YS2S CA21KS2 CP21KS2 CA21SF1 CP21SF1 CA21KS2K CP21KS2K 5 cmx 9 cm x 2 pcs Model CA21XS2S CP21XS2S 6 cm x 12 cm x 2 pcs Ext terminals DVD Video Component Composite Component Y CB CR input Video Inputs Phone Jack x 2 1 0Vp p impedance 75 Q Audio Inputs Phone Jack L R x 2 4836mVrms impedance more than 40KQ Video monitor outputs Phone Jack x 1 1 0Vp p impedance 75 02 Audio monitor outputs Phone Jack L R x 1 486mVrms impedance less than 60002 Model CA21SF1 CP21SF1 are not equipped with Front AV2 input terminal Dimension Model
20. the television cabinet slots or openings Never spill any kind of liquid on the television receiver To prevent fire or electrical shock hazard do not expose the television receiver to rain or moisture The television shall not be exposed to dripping or splashing and that no objects filled with liquids such as vases shall be Do not block the ventilation holes in the back cover Adequate ventilation is essential to prevent failure of electrical compo nents Do not squash power supply cord under the television receiver ZIN Minimum distances 10cm 10cm If the televi sion is to be built into a compartment or similarly enclosed the minimum _ dis tances must be maintained Heat build up can reduce the service life of your televi sion and can also be dangerous 3 Warnings and Cautions 2 Contents 000000 ees 3 Plug amp Play 3 Front Control 005 4 5 Remote Control Transmitter 6 Battery Installation of the Remote Control Transmitter 6 General Operation Remote Control Operation 7 OFF TIMER skin i2cpexcbdvuene eds 8 ON TIMER owes in ee bbe kd eheee ee 8 Colour and Sound System Setting of the Colour System 8 Setting of the Sound system 8 9 Picture Adjustment 9 10 Audio Adjustment 10 Tuning of the Channels Automatic Tuning 11 Semi Auto Tunin
21. to set the programme position 15 as the private position Press and hold the RECALL COLOUR SYSTEM button for more than 2 seconds DA 1 Select programme position 15 Press the RECALL COLOUR SYSTEM Press and hold the RECALL COLOUR button for watching a TV programme SYSTEM button for more than 2 seconds i Note The position 15 is still in the private position Cancelling of the Private Position 1 Select private position position 15 The programme number 15 will shift to centre of 3 Press the MENU button Press and hold the RECALL COLOUR SYSTEM button for more than 2 seconds g BG AUTO The picture will disappear and 15 will be dis play on the screen The private position setting is now completed The private position is now cancelled 15 Setting of the OSD Language Press the MENU button for MAIN menu display PyYCCKN FRANCAIS PORTUGUES Select ENGLISH RFA wa PYCCKIN 7 FRANCAIS PORTUGUES by pressing the Programme UP or DOWN button To return to the normal TV mode press the MENU Select LANGUAGE by pressing the programme UP or DOWN button button Press the VOLUME or button for Press the MENU button to return to normal Language menu display TV display Connecting Other Equipment O Connecting To the Rear AVI Input Jacks Connecting to a Monophonic Video Recorder AV1
22. useful after automatic For example to set programme position 4 as tuning Skip channel For example to swap the channel between pro g Enter to SEMI AUTO or MANUAL tuning gramme position 6 and programme position 4 mode Refer to page 11 Select POSITION with the Programme UP or DOWN button Press remote control 4 button to select programme position 4 Use the DIGIT button Select programme position 6 and Programme Selector Number buttons 1 to enter programme number Do not use the VOLUME or button to enter programme position in this settings To 2 Press the SWAP button 13 O Skip Channel Set and cancel Continued Select SKIP by pressing the Programme UP Select MEMORY by pressing the or DOWN button then press the VOLUME Programme UP or DOWN button then press or button to set SKIP to ON To cancel Skip the VOLUME or button for memory Channel function set to OFF Any number of channels maybe set as Skip Channels S MseLect W ansu ir ri Press the MENU button to return to normal TV displav Setting of the Private Posistion Private position is used to restrict of pro a gramme positions that you do not want others O To View a Programme on Private Position to watch Any position can be set as the Private 1 Select private position In this case position 15 position Q How To Set the Private Position For example
23. yed in this monaural connection 15 Connecting To the Rear AV1 Input Jacks Continued E When watching a video program input from the AV1 terminal press the TV AV button to select AV1 Whenever the TV AV button is pressed the mode will change as follows 23 ju jhm AV eee AVI DVD A v2 TV mode Optional model E You can select a TV programme while watching a playback from a VCR For example To select programme position 9 while watching a playback from external VCR press 9 button of the remote control The TV set returns to the TV mode and programme 9 will be selected e To select the programme position 26 press Digit button 2 then 6 button Then TV set returns to the TV mode and programme position 26 will be selected Note Pressing either of the PROGRAMME UP or DOWN buttons of the remote control or the TV will return the TV to the TV mode O Selecting the Colour System in AV Mode Depending on the type of video tape or connected AV equipment being used it may be necessary to select colour system In this case press the RECALL COLOUR SYSTEM button and select a suitable colour system Each time the RECALL COLOUR SYSTEM button is pressed colour system is changed as follow AV1 AV1 AV1 AV1 AUTO e PAL e NTSC NTSC 4 43 Colour system setting for AV position is automatically stored in the memory O Connecting To a DVD Player with AV1 DVD
Download Pdf Manuals
Related Search