Home

Samsung BN68-02624A-05 User's Manual

Contents

1. Component Cable Not Supplied Audio Cable Not Supplied Red Blue Green IT R AUDIO L Connections Using an Optical Digital or Audio Analog Cable or Headphone Connection Available devices Digital Audio System Amplifier DVD Home Theater UN19C4000 UN22C4000 Headphone Optical Cable Not Supplied UN26C4000 Amplifier DVD home theater o OOO a e R AUDIO L s j Audio Cable Not Supplied Optical Cable Not Supplied Red White amp DIGITAL AUDIO OUT OPTICAL e When a Digital Audio System is connected to the DIGITAL AUDIO OUT OPTICAL jack decrease the volume of both the TV and the system 5 1 CH channel audio is available when the TV is connected to an external device supporting 5 1 CH e When the receiver amplifier or DVD home theater is set to on you can hear sound output from the TV s optical jack When the TV is receiving a DTV signal the TV will send 5 1 CH sound to the amplifier or DVD home theater When the source is a digital component such as a DVD Blu ray player cable box STB Set Top Box satellite receiver and is connected to the TV via HDMI only 2 CH audio will be heard from the amplifier or DVD home theater If you want to hear 5 1 CH audio connect the digital audio out
2. Connect a USB HDD to the dedicated port USB HDD port e Do not disconnect the USB device while it is loading e The higher the resolution of the image the longer it takes to display on the screen e The maximum supported JPEG resolution is 15360X8640 pixels e For unsupported or corrupted files the Not Supported File Format message is displayed e Ifthe files are sorted by Basic View up to 1000 files can be displayed in each folder e MP3 files with DRM that have been downloaded from a non free site cannot be played Digital Rights Management DRM is a technology that supports the creation distribution and management of the content in an integrated and comprehensive way including the protection of the rights and interests of the content providers the prevention of the illegal copying of contents as well as managing billings and settlements If more than 2 PTP devices are connected you can only use one at a time If more than two MSC devices are connected some of them may not be recognized A USB device that requires high power more than 500mA or 5V may not be supported If an over power warning message is displayed while you are connecting or using a USB device the device may not be recognized or may malfunction If the TV has been no input during time set in Auto Protection Time the Screensaver will run The power saving mode of some external hard disk drives may be released automatically when connected to the TV
3. PIP functionality is only available when you are using a HDMI PC or Component source POP TV s internal banner ad appears on the screen Select Home Use under Plug amp Play mode For details refer to Plug amp Play Feature p 8 amp This TFT LED panel uses a panel consisting of sub pixels which require sophisticated technology to produce However there may be a few bright or dark pixels on the screen These pixels will have no impact on the performance of the product Storage and Maintenance Do not spray water or a cleaning agent directly onto the product Any liquid that goes into the product may cause a failure fire or electric shock Clean the product with a soft cloth dapped in a small amount of water English 39 UONEWUOJU BUIO SO Other Information QI DOLBY Manufactured under license from Dolby Laboratories Dolby and the double D symbol are DIGITAL PLUS trademarks of Dolby Laboratories PULSE Manufactured under license under U S Patent s 5 451 942 5 956 674 5 974 380 5 978 762 6 487 535 amp other U S and worldwide patents issued amp pending DTS and the Symbol are registered trademarks amp DTS 2 0 Digital Out and the DTS logos are trademarks of DTS Inc Product Includes software DTS Inc All Rights Reserved 2 0 Digital Out DivX Certified to play DivX video up to HD 1080p including premium content ABOUT DIVX VIDEO
4. amp NOTE x vo W e The v mark appears to the left of the selected files e To cancel a selection press the Yellow button again e To deselect all selected files press the TOOLS button and select Deselect All 3 Press the TOOLS button and select Play Selected Contents EA SUM JA Change Device Select ID Soring A Tools 2files selected 1 1 Page Jan 10 2010 Movie 06 Playing the video music photo file group 1 While a file list is displayed move to any file in the desired group 2 Press the TOOLS button and select Play Current Group H Media Play Additional Functions Sorting the file list Press the Blue button in the file list to sort the files Category Operation Videos Music Photos SD Basic View Displays the whole folder You can view the photo by selecting the folder Vv Vv Vv Title Sorts and displays the file title in Symbol Number Alphabet Special order Vv Vv Vv E Preference Sor S and displays the file by preference You can change the file preference in the file v v v list section using the Green button E Latest Date Sorts and shows files by the latest date Vv v Earliest Date Sorts and shows files by the earliest date Vv Vv Artist Sorts the music file by artist in alphabetical order v 2 Album Sorts the music file by album in alphabetical order v Genre Sorts music files by the genre Vv Mood Sorts music files by the mood You can change the music mood
5. The rating will automatically block certain categories that deal with more sensitive material The rating titles For example Humor Level etc and TV ratings For example DH MH H etc may differ depending on the broadcasting station Change PIN The Change PIN screen will appear Choose any 4 digits for your PIN and enter them As soon as the 4 digits are entered the Confirm New PIN screen appears Re enter the same 4 digits When the Confirm screen disappears your PIN has been memorized English 21 sounjeey oisegq 0 Basic Features How to watch a restricted channel If the TV is tuned to a restricted channel the V Chip will block it The screen will go blank and the following message will appear This channel is blocked by V Chip Please enter the PIN to unblock W tf you forget the PIN press the remote control buttons in the following sequence which resets the pin to 0 0 0 0 POWER off MUTE gt 8 gt 2 gt 4 gt POWER on fl Other Features MENU II Setup gt ENTERC Menu Language Set the menu language 1 Select Menu Language and press the ENTER C button 2 Choose desired language and press the ENTERC button Choose between English Espa ol and Fran ais Caption On Screen Text Messages E Caption Off On You can switch the caption function on or off If captions are not available they will not be displayed on the screen The Caption feat
6. for 5 sec Selecting an antenna Press the A or Y button then press the ENTER C button Select Air Cable or Auto Selecting a channel Press the A or Y button then press the ENTER C button Select the channel source to memorize When setting the antenna source to Cable a step appears allowing you to assign numerical values channel frequencies to the channels For more information refer to Channel Auto Program p 14 amp Q Press the ENTERC button at any time to interrupt the memorisation process Setting the Clock Set the Clock Mode automatically or manually Mode e Auto Allows you to select DST Daylight Saving Time mode and time zone e Manual Allows you to manually set the current date and time p 19 Viewing the HD e The connection method for the best HD screen quality is displayed Connection Guide Enjoy your TV Press the ENTER C button If You Want to Reset This Feature MENU II gt Setup Plug amp Play gt ENTERC 8 English Connections Connecting to an AV Device Using an HDMI or HDMI DVI cable HD connection up to 1080p We recommend using the HDMI connection for the best quality HD picture Available devices DVD Blu ray player HD cable box HD STB Set Top Box satellite receiver suonodeuu0D ZO HDMIIN HDMI Cable Not Supplied E HDMI to DVI Cable Not Supplied PC DVI cf AUDIO IN Fs Cl Audio C
7. in Canada and in Canada on SAMSUNG products purchased in the United States for the warranty period originally specified and to the Original Purchaser only The above described warranty repairs must be performed by a SAMSUNG Authorized Service Center Along with this Statement the Original Limited Warranty Statement and a dated Bill of Sale as Proof of Purchase must be presented to the Service Center Transportation to and from the Service Center is the responsibility of the purchaser Conditions covered are limited only to manufacturing defects in material or workmanship and only those encountered in normal use of the product Excluded but not limited to are any originally specified provisions for in home or on site services minimum or maximum repair times exchanges or replacements accessories options upgrades or consumables For the location of a SAMSUNG Authorized Service Center please call toll free In the United States 1 800 SAMSUNG 1 800 726 7864 In Canada 1 800 SAMSUNG Still image warning Avoid displaying still images such as jpeg picture files or still image elements such as TV channel logos panorama or 4 3 image format stock or news bars at screen bottom etc on the screen Constant displaying of still pictures can cause uneven wear of the screen which will affect image quality To reduce risk of this effect please follow below recommendations e Avoid displaying the same TV channel for
8. input source selection easier ENTER amp When connecting an HDMI DVI cable to the E TV PC AV Component HDMI1 DVI HDMI IN 1 DVI port you should set the TV to DVI PC HDMI2 USB or DVI Devices mode under Edit Name amp You can only choose external devices that are connected to the TV In the Source List connected inputs will be highlighted amp Inthe Source List PC is always activated Basic Features How to Operate the OSD On Screen Display Before using the TV follow the steps below to learn how to The access step may differ depending on the selected menu navigate the menu and select and adjust different functions 1 MENU m The main menu options appear on the screen Picture Sound Channel Setup Input Application Support A yY Select an icon with the A or Y button ENTER C Press ENTERL to access the sub menu A Y Select the desired submenu with the A or Y button lt gt Adjust the value of an item with the lt or gt button The adjustment in 3 NO ORON MENU button Displays the main on screen menu the OSD may differ depending on ENTER Direction button Move the cursor and the selected menu select an item Confirm the setting ENTER C Press ENTER C to confirm the RETURN button Returns to the previous menu selection 0 EXIT Press EXIT EXIT button Exits the on screen menu 1 2 English Channel Menu fi Seeing Channels Channe
9. jack from your DVD Blu ray player cable box STB satellite receiver directly to an amplifier or home theater amp HEADPHONE A You can connect your headphones to the headphones output on your set While the headphones are connected the sound from the built in speakers will be disabled Sound function may be restricted when connecting headphones to the TV e Headphone volume and TV volume are adjusted separately amp AUDIO OUT Connects to the audio input jacks on your amplifier home theater e When connecting use the appropriate connector e When an audio amplifier is connected to the AUDIO OUT jacks Decrease the volume of the TV and adjust the volume level with the amplifier s volume control XN 10 English Using an EX Link Cable Connection Available Devices External devices that support EX Link EX LINK Connector for service only Connecting to a PC Using an HDMI DVI cable or a D sub cable suonodeuu0D Z0 HDMI to DVI Cable Not Supplied aE a AUDIO OUT Audio Cable Not Supplied D Sub Cable Not Supplied Ble Display Modes D Sub and HDMI DVI Input Optimal resolution is 1360 x 768 60 Hz F Horizontal Frequency Vertical Frequency Pixel Clock Frequency Sync Polarity Mode Resolution KHz
10. jack of component input 1 on the TV When changing channels the picture freezes or is distorted or delayed e If connected with a cable box please try to reset the cable box reconnect the AC cord and wait until he cable box reboots It may take up to 20 minutes e Set the output resolution of the cable box to 1080i or 720p Sound Problem First of all please perform the Sound Test to confirm that your TV audio is properly operating go to MENU Support Self Diagnosis Sound Test p 23 If the audio is OK the sound problem may caused by the source or signal There is no sound or the sound is too low at maximum volume e Please check the volume the of device Cable Sat Box DVD Blu ray etc connected to your TV The picture is good but there is no sound e Set the Speaker Select option to TV Speaker in the sound menu p 19 e If you are using an external device make sure the audio cables are connected to the correct audio input jacks on the TV e If you are using an external device check the device s audio output option ex you may need to change your cable box s audio option to HDMI when you have a HDMI connected to your TV e If you are using a DVI to HDMI cable a separate audio cable is required e If your TV has a headphone jack make sure there is nothing plugged into it e Reboot the connected device by reconnecting the device s power cable The speakers are making an inappropriate noi
11. long periods e Always try to display a full screen image e Reducing brightness and contrast will help to avoid the appearance of after images e Use all TV features designed to reduce image retention and screen burn refer to proper user manual section for details Securing the Installation Space Keep the required distances between the product and other objects e g walls to ensure proper ventilation Failing to do so may result in fire or a problem with the product due to an increase in the internal temperature of the product amp When using a stand or wall mount use parts provided by Samsung Electronics only f you use parts provided by another manufacturer it may result in a problem with the product or an injury due to the product falling amp The appearance may differ depending on the product amp Be careful when you contact the TV because some parts can be somewhat hot Installation with a stand Installation with a wall mount 4 inches 4 inches 4 inches a N 4 inches 2 English Contents S 19 e List of Features 4 Seting the Time i i Ei Using the Sleep Timer 20 Pian Ul etic pile paar inate eee 4 Setting the On Off Timer 20 e Install the Stand Locking Programs 20 UN19C4000 UN22C4000 UN2204010 sse 5 Other Features 22 e Install the Stand UN26C4000 eee 5 Picture In Picture PIP 23 Viewing the Control PanElsissinisaniasiisansass 6 Suppo
12. pressing the SOURCE button on the remote control Reboot the connected device by reconnecting the device s power cable RF Cable Antenna Connection The TV is not receiving all channels No Caption on digital channels Make sure the coaxial cable is connected securely Please try Auto Program to add available channels to the channel list Go to MENU Channel Auto Program then select Auto and make sure the correct Cable TV signal type is set in the menu There are 3 options STD HRC and IRC p 14 Verify the Antenna is positioned correctly Check Caption Setup menu Try changing Caption Mode Service to CC1 p 22 Some channels may not have caption data The picture is distorted macroblock error small block dots pixelization Compression of video contents may cause picture distortion especially with fast moving pictures such as sports and action movies A low signal can cause picture distortion This is not a TV problem PC Connection A Mode Not Supported message appears Set your PC s output resolution so they match the resolutions supported by the TV p 11 PC is always shown on the source list even if a PC is not connected This is normal PC is always shown on the source list regardless of whether a PC is connected The video is OK but there is no audio If you are using an HDMI connection check the audio output setting on your PC Others Purple green
13. rolling horizontal bars and buzzing noise from the TV speakers with Component cable connection Remove the left and right audio connections from the set top box If the buzzing stops this indicates that the set top box has a grounding issue Replace the Component video cables with an HDMI connection The picture won t display in full screen HD channels will have black bars on either side of the screen when displaying upscaled SD 4 3 contents Black bars on the top and bottom will appear during movies that have aspect ratios different from your TV Adjust the picture size options on your external device or TV to full screen The remote control does not work Replace the remote control batteries with the poles in the right direction Clean the sensor s transmission window on the remote Try pointing the remote directly at the TV from 5 6 feet away The cable set top box remote control doesn t turn the TV on or off or adjust the volume Program the Cable Set remote control to operate the TV Refer to the Cable Set user manual for the SAMSUNG TV code 38 English Issues Solutions and Explanations A Mode Not Supported message appears Check the supported resolution of the TV and adjust the external device s output resolution accordingly Refer to the resolution settings on page 11 of this manual Caption on TV menu is greyed out Caption can not be selected in the TV menu when conn
14. sub ratings in TV 14 and TV MA will automatically be blocked MPAA Rating You can block movies depending on their MPAA rating The Motion Picture Association of America MPAA has implemented a rating system that provides parents or guardians with advanced information on which films are appropriate for children G General audience no restrictions PG Parental guidance suggested PG 13 Parents strongly cautioned R Restricted Children under 17 should be accompanied by an adult NC 17 No children under age 17 X Adults only NR Not rated The V Chip will automatically block any category that deals with more sensitive material For example if you block the PG 13 category then R NC 17 and X will automatically be blocked Canadian English You can block TV programs depending on their Anglophone Canadian ratings C Programming intended for children under age 8 C8 Programming generally considered acceptable for children 8 years and over to watch on their own G General programming suitable for all audiences PG Parental Guidance 14 Programming contains themes or content which may not be suitable for viewers under the age of 14 18 Adult programming The V Chip will automatically block any category that deals with more sensitive material For example if you block the G category then PG 14 and 18 will automatically be blocked Canadian French You can block TV progr
15. thickness 0 55 inches 14mm HDMI HDMI DVI Component Composite AV Coaxial RF VGA 4 English LO Install the Stand UN19C4000 UN22C4000 UN22C4010 See separate guide for installing the stand A Stand Base Stand Body peyeys Buya 9 Follow the steps below to connect the TV to the stand 1 Insert the stand body into the 2 Screw the stand base to the stand 3 Slide the TV onto the stand body stand base body amp NOTE e Make sure to distinguish between the front and back of the Stand and Guide Stand when assembling them e Lay the product down with the screen facing up and fasten the screws Install the Stand UN26C4000 See separate guide for installing the stand a Aw 5EA M4 X L12 Se B m 5EA M4 X L8 Stand 1EA Guide Stand 1EA Screws 10EA Follow the steps below to connect the TV to the stand Rear 1 Connect the Guide Stand to the Stand 2 With your TV upright 3 Fasten two screws M4 X using five screws M4 X L12 as shown connect the TV to the Stand L8 at position and then as shown fasten three screws M4 X L8 at position NOTE e Make sure to distinguish between the front and back of the Stand and Guide Stand when assembling them e Make sure that at least two persons lift and move the LED TV e Stand the product up and fasten the screws If you fasten the screws with the LED TV placed down it may lean to one side E
16. 52 8 x 29 9 x 422 8 mm With stand 18 8 x 7 5 x 14 7 inches 21 5 x 7 5 x 16 2 inches 25 7 x 8 3 x 18 9 inches 477 6 x 189 6 x 374 1mm 545 2 x 189 5 x 411 1 mm 652 8 x 212 0 x 479 8 mm Weight Without Stand 7 9 Ibs 3 6 kg 8 2 Ibs 3 7 kg 12 1 Ibs 5 5 kg With Stand 8 6 Ibs 3 9 kg 9 0 Ibs 4 1 kg 13 7 Ibs 6 2 kg SN Design and specifications are subject to change without prior notice This device is a Class B digital apparatus amp For information about power supply and more about power consumption refer to the label attached to the product 40 English E Front view Side view UOHEULOJU BUI S0 7 1 haa lt 2 gt 5 6 P oa o Unit inches Model name 1 2 4 5 O 7 O UN19C4000 18 8 16 2 9 1 11 0 12 6 14 7 1 2 TS UN22C4000 UN22C4010 21 5 18 8 10 6 11 0 14 1 16 2 1 2 5 UN26C4000 25 7 220 12 8 16 9 16 6 18 9 1 2 8 3 E Jack panel detail rear view k _ 41 ii TT i Ta 6 O a eS b a_a Unit inches Model name 4 2 3 4 5 6 UN19C4000 3 0 3 0 15 8 2 6 6 5 3 0 1 5 10 9 UN22C4000 UN22C4010 3 0 3 0 18 5 2 2 6 8 2 9 2 4 10 9 UN26C4000 7 9 3 9 23 1 3 4 6 8 2 6 2 6 10 6 NOTE All drawings are not necessarily to scale Some dimensions are subject to change without prior notice Re
17. Contact SAMSUNG WORLDWIDE If you have any questions or comments relating to Samsung products please contact the SAMSUNG customer care center Country Customer Care Center Z Web Site Address CANADA _ 1 800 SAMSUNG 726 7864 www samsung com ca Samsung Electronics Canada Inc Customer Service 55 Standish Court Mississauga Ontario L5R 4B2 Canada U S A 1 800 SAMSUNG 726 7864 www samsung com us Samsung Electronics America Inc 85 Challenger Road Ridgefield Park NJ 07660 2112 2010 Samsung Electronics Co Ltd All rights reserved BN68 02624A 05 imagine the possibilities Thank you for purchasing this Samsung product To receive more complete service please register your product at www samsung com register Model Serial No Figures and illustrations in this User Manual are provided for reference only and may differ from actual product appearance Product design and specifications may be changed without notice Important Warranty Information Regarding Television Format Viewing amp See the warranty card for more information on warranty terms Wide screen format LED Displays 16 9 the aspect ratio of the screen width to height are primarily designed to view wide screen format full motion video The images displayed on them should primarily be in the wide screen 16 9 ratio format or expanded to fill the screen if your model offers this feature and the images are constantly moving Displaying stati
18. DivX is a digital video format created by DivxX Inc This is an official DivX Certified device that plays DivX video Visit www divx com for more information and software tools to convert your files into DivX video ABOUT DIVX VIDEO ON DEMAND This DivX Certified device must be registered in order to play DivX Video on Demand VOD content To generate the registration code locate the DivX VOD section in the device setup menu Go to vod divx com with this code to complete the registration process and learn more about DivX VOD Pat 7 295 673 7 460 688 7 519 274 Open Source License Notice In the case of using open source software Open Source Licenses are available on the product menu Open Source License Notice is written only English Specifications Display Resolution 1360 x 768 Environmental Considerations Operating Temperature 50 F to 104 F 10 C to 40 C Operating Humidity 10 to 80 non condensing Storage Temperature 4 F to 118 F 20 C to 45 C Storage Humidity 5 to 95 non condensing Model Name UN19C4000 UN22C4000 UN22C4010 UN26C4000 Screen Size 19 inches 22 inches 26 inches Diagonal 18 5 inches measured diagonally 21 5 inches measured diagonally 26 0 inches measured diagonally Sound Output 38WX2 3WX2 5WX2 Dimensions WxDxH Body 18 8 x 1 2 x 12 6 inches 21 5 x 1 2 x 14 1 inches 25 7 x 1 2 x 16 6 inches 477 6 x 29 9 x 320 6 mm 545 2 x 29 9 x 359 0 mm 6
19. E Color Space Auto Native Custom Adjust the range of colors available to create the image To adjust Color Red Green Blue and Reset set Color Space to Custom B White Balance Adjust the color temperature for a more natural picture R Offset G Offset B Offset Adjust each color s red green blue darkness R Gain G Gain B Gain Adjust each color s red green blue brightness Reset Resets the White Balance to it s default settings E Flesh Tone Emphasize pink Flesh Tone E Edge Enhancement Off On Emphasize object boundaries Picture Options MENU Ml Picture Picture Options gt ENTER G In PC mode you can only make changes to the Color Tone Size Digital Noise Filter and Auto Protection Time Picture Options Color Tone Normal gt Size 116 9 Digital Noise Filter Auto MPEG Noise Filter Auto HDMI Black Level Normal Film Mode Off Auto Protection Time 2 hours Move Enter 5 Return amp Warm1 or Warm will be deactivated when the picture Color Tone Cool Normal Warm1 Warm2 mode is Dynamic amp Settings can be adjusted and stored for each external device connected to an input on the TV Size Your cable box satellite receiver may have its own set of screen sizes as well However we highly recommend you use 16 9 mode most of the time 16 9 Sets the picture to 16 9 wide mode Zoom1 Use for moderate magnific
20. Hz MHz H V IBM 640 x 350 31 469 70 086 25 175 720 x 400 31 469 70 087 28 322 MAG 640 x 480 35 000 66 667 30 240 832 x 624 49 726 74 551 57 284 720 x 576 35 910 59 950 32 750 VESA CVT 1280 x 720 56 456 74 777 95 750 640 x 480 31 469 59 940 25 175 640 x 480 37 500 75 000 31 500 640 x 480 37 861 72 809 31 500 800 x 600 37 879 60 317 40 000 800 x 600 46 875 75 000 49 500 VESA DMT 800 x 600 48 077 72 188 50 000 1024 x 768 48 363 60 004 65 000 1024 x 768 56 476 70 069 75 000 1024 x 768 60 023 75 029 78 750 1280 x 720 45 000 60 000 74 250 1360 x 768 47 712 60 015 85 500 VESA GTF 1280 x 720 52 500 70 000 89 040 amp NOTE For HDMI DVI cable connection you must use the HDMI IN 1 DVI jack The interlace mode is not supported The set might operate abnormally if a non standard video format is selected Separate and Composite modes are supported SOG Sync On Green is not supported English 1 1 Connections Edit Name MENU II Input gt Edit Name ENTERC Source List E VCR DVD Cable STB Satellite STB PVR STB Use to select TV or an external input sources QURCE AV Receiver Game Camcorder PC DVI PC such as a DVD Blu ray player cable box DVI Devices TV IPTV Blu ray HD DVD DMA STB satellite receiver a Name the device connected to the input jacks to make MENU MII Input gt Source List gt your
21. If a USB extension cable is used the USB device may not be recognized or the files on the device may not be read If a USB device connected to the TV is not recognized the list of files on the device is corrupted or a file in the list is not played connect the USB device to the PC format the device and check the connection If a file deleted from the PC is still found when Media Play is run use the Empty the Recycle Bin function on the PC to permanently delete the file English 25 soinjee4 peoueapy vo Advanced Features D Screen Display Move to the desired file using the up down right left buttons and then press the ENTER C or gt Play button The file is played Q amp Q Supports the View Devices and Home in Media Play homepage Information g i Movie 01 avi 1 1 Page You can ascertain the selected file name and the number of files and page Movie 05 avi Sort List Section Displays the sorting standard amp The sorting standard is Movie 02 avi Movie 04 avi i S i Jan 10 2010 10 2010 File List Section You can confirm the files and groups that are sorted by category 06 avi Jan 10 2010 Red Change Device Selects a connected device E Green Preference Sets the file preference not supported in Basic view Yellow Select Selects multiple files from file list Selected files are marked with a symbol E Blue Sorting Selects the sort list lays the o
22. Medium High Picture Off Auto This adjusts the brightness of the TV in order to reduce power consumption If you select Picture Off the screen is turned off but the sound remains on Press any button to turn on the screen again E No Signal Power Off Off 15 min 30 min 60 min To avoid unnecessary energy consumption set how long you want the TV to remain on if it s not receiving a signal amp Disabled when the PC is in power saving mode a Changing the Picture Options Advanced Settings MENU I Picture Advanced Settings gt ENTER L Advanced Settings are available in Standard Movie mode Compared to previous models new Samsung TVs have a more precise picture In PC mode you can only make changes to Dynamic Contrast Gamma and White Balance Advanced Settings Black Tone Off gt Dynamic Contrast Medium Shadow Detail 0 Gamma ay RGB Only Mode Off Color Space Native White Balance v Move Enter 5 Return 1 6 English E Black Tone Off Dark Darker Darkest Select the black level to adjust the screen depth E Dynamic Contrast Off Low Medium High Adjust the screen contrast H Shadow Detail 2 2 Increase the brightness of dark images E Gamma Adjust the primary color intensity E RGB Only Mode Off Red Green Blue Displays the Red Green and Blue color for making fine adjustments to the hue and saturation
23. P 920x1080 6 30 25 ADPCM DTS Core MPEG4 SP ASP 920x1080 6 30 8 Divx 3 11 4 x 5 1 6 0 920x1080 6 30 8 ani roe XviD 920x1080 6 30 8 MP3 AC3 LPCM H 264 BP MP HP 920x1080 6 30 25 ADPCM WMA MPEG4 SP ASP 920x1080 6 30 8 wmv ASF Window Media Video v9 920x1080 6 30 25 WMA H 264 BP MP HP 920x1080 6 30 25 mp4 MP4 MPEG4 SP ASP 920x1080 6 30 8 MP3 ADPCM AAC XVID 920x1080 6 30 8 3gp 3GPP cae LME ME ADPCM AAG HE AAC MPEG4 SP ASP 920x1080 6 30 8 VRO MPEG1 920x1080 24 25 30 30 bai VOB MPEG2 920x1080 24 25 30 30 ene MPEG 1920x1080 24 25 30 30 te PS MPEG2 1920x1080 24 25 30 30 AC3 MPEG LPCM AAC H 264 1920x1080 6 30 25 m MPEG2 1920x1080 24 25 30 30 E TS H 264 1920x1080 6 30 25 A VC1 1920x1080 6 30 25 Other Restrictions B NOTE e If there are problems with the contents of a codec the codec will not be supported e If the information for a Container is incorrect and the file is in error the Container will not be able to play correctly Sound or video may not work if the contents have a standard bitrate frame rate above the compatible Frame sec listed in the table above If the Index Table is in error the Seek Jump function is not supported Video Decoder Audio Decoder Supports up to H 264 Level 4 1 H 264 FMO ASO RS VC1 SP MP AP L4 and AVCHD are not e supported GMC is not supported H 263 is not supported
24. Supports up to WMA 7 8 9 STD WMA 9 PRO does not support 2 channel excess multi channel or lossless audio WMA sampling rate 22050Hz mono is not supported English 27 soinyee4 peoueapy vo Advanced Features Playing movie continuously Resume Play If you exit the playing movie function the movie can be played later from the point where it was stopped f 00 04 03 00 07 38 Movie 01 avi R m 1 Select the movie file you want to play continuously by pressing the lt or P gt button to select it from the file list section 2 Press the gt Play ENTER C button 3 Select Play Continuously Resume Play by pressing the Blue button The Movie will begin to play from where it was stopped The Blue button is available when resuming play i I Funes yea rom ne vstvene amp Ifthe Continuous Movie Play Help functionissetto Onin PINS D the Settings menu a pop up message will appear when you resume play a movie file Sk sum ID Play continuously 4 Pause lt gt Jump 4 Tools D Return Music Playing Music 1 Press the lt or gt button to select Music then press the ENTER C button in the Media Play menu 2 Press the lt gt A button to select the desired Music file in the file list Music 1 E lo Singer 3 Press the ENTER C button or gt Play button During music playback you can search using the lt and gt button 44 REW and gt gt FF buttons do not
25. V If you connect to the DivX web site and register you can download the VOD registration file If you play the VOD registration using Media Play the registration is completed amp For more information on DivX VOD visit www DivX com H Get DivX VOD deactivation code When DivX VOD is not registered the registration deactivation code is displayed If you execute this function when DivX VOD is registered the current DivX VOD registration is deactivated E Information Select to view information about the connected device 3 0 English Anynet What is Anynet Anynet is a function that enables you to control all connected Samsung devices that support Anynet with your Samsung TV s remote The Anynet system can be used only with Samsung devices that have the Anynet feature To be sure your Samsung device has this feature check if there is an Anynet logo on it To connect to a Samsung Home Theater Anynet Anynet Device 1 Device 2 Home Theater gt JZ TV Rear Panel HDMI IN HDMIOUT DIGTALALDON El HDMIIN Jin HDMI Cable Not Supplied bv HDMI Cable Not Supplied DIGITAL AUDIO OUT OPTICAL Optical Cable Not Supplied 1 Connect the HDMI IN 1 DVI or 2 jack on the TV and the HDMI OUT jack of the corresponding Anynet device using an HDMI cable 2 Connect the HDMI IN jack of the home theater
26. able Not Supplied Red White amp HDMI IN 1 DVI 2 PC DVI AUDIO IN e When using an HDMI DVI cable connection you must use the HDMI IN 1 DVI jack for video A DVD Blu ray player HD cable box or HD STB satellite receiver may require a DVI HDMI DVI to HDMI cable or DVI HDMI DVI to HDMI adapter The PC DVI AUDIO IN jack is required for audio e Be sure to use an HDMI cable with a thickness of 14 mm or less e The picture may not display normally if at all or the audio may not work if an external device that uses an older version of HDMI mode is connected to the TV If such a problem occurs ask the manufacturer of the external device about the HDMI version and if out of date request an upgrade Be sure to purchase a certified HDMI cable Otherwise the picture may not display or a connection error may occur Using a Component up to 1080p or Audio Video 480i only Cable Available devices Digital Audio System Amplifier Home Theater Video Cable Not Supplied Red White Yellow Device VIDEO OUT AUDIO OUT R AUDIO L amp COMPONENT IN AV IN When connecting to AV IN the color of the AV IN Y VIDEO jack green will not match the video cable yellow amp For better picture quality the Component connection is recomended over the A V connection amp If the size of the cable mold part was an abnormal shape the part may not be connected to the input port properly English 9
27. age or personal injury when a non VESA or non specified wall mount is used or the consumer fails to follow the product installation instructions Do not mount the TV at more than a 15 degree tilt Always use two people to mount the TV to a wall Product Family inches VESA Spec A B Standard Screw Quantity 19 22 75 X75 M4 23 29 200 X 100 LED IV f Boney 200 X 200 4 Ultra Slim M8 40 55 400 X 400 56 65 600 X 400 Do not install your Wall Mount Kit while your TV is turned on It may result in personal injury due to electric shock English 35 UONEWUOJU BUIO SO Other Information Anti theft Kensington Lock The Kensington Lock is not supplied by Samsung It is a device used to physically fix the system when using it in a public place The appearance and locking method may differ from the illustration depending on the manufacturer Refer to the manual TV Rear 2 amp e a provided with the Kensington Lock for additional information on proper use a 1 0 Please find a fa icon on the rear of the TV A kensington slot is beside the R 9 i Q icon g z To lock the product follow these steps J 1 Wrap the Kensington lock cable around a large stationary object such as eeceeee 7 desk or chair lt Optional gt 2 Slide the end of the cable with the lock attached through the looped end of the Kensington lock cable 3 Insert the locking device into the Kensingto
28. ams depending on their French Canadian rating G General 8 ans Programming generally considered acceptable for children 8 years and over to watch on their own 13 ans Programming may not be suitable for children under the age of 13 16 ans Programming is not suitable for children under the age of 16 18 ans Programming restricted to adults The V Chip will automatically block any category that deals with more sensitive material For example if you block the 8 ans category then 13 ans 16 ans and 18 ans will automatically be blocked also Downloadable U S Rating Parental restriction information can be used while watching DTV channels amp NOTE e If information is not downloaded from the broadcasting station the Downloadable U S Rating menu is deactivated e Parental restriction information is automatically downloaded while watching DTV channels It may take several seconds The Downloadable U S Rating menu is available for use after information is downloaded from the broadcasting station However depending on the information from the broadcasting station it may not be available for use e Parental restriction levels differ depending on the broadcasting station The default menu name and Downloadable US Rating change depending on the downloaded information e Even if you set the on screen display to another language the Downloadable U S Rating menu will appear in English only
29. and the HDMI OUT jack of the corresponding Anynet device using an HDMI cable amp NOTE Connect the Optical cable between the DIGITAL AUDIO OUT OPTICAL jack on your TV and the Digital Audio Input on the Home Theater e When following the connection above the Optical jack only outputs 2 channel audio You will only hear sound from the Home Theater s Front Left and Right speakers and the subwoofer If you want to hear 5 1 channel audio connect the DIGITAL AUDIO OUT OPTICAL jack on the DVD Satellite Box i e Anynet Device 1 or 2 directly to the Amplifier or Home Theater not the TV You can connect only one Home Theater e You can connect an Anynet device using the HDMI cable Some HDMI cables may not support Anynet functions e Anynet works when the AV device supporting Anynet is in the standby or on status Anynet supports up to 12 AV devices in total Note that you can connect up to 3 devices of the same type English 3 1 soinjee4 peoueapy vo Advanced Features Anynet Menu The Anynet menu changes depending on the type and status of the Anynet devices connected to the TV Anynet Menu Description View TV Changes Anynet mode to TV broadcast mode Device List Shows the Anynet device list device_name MENU Shows the connected device menus E g If a DVD recorder is connected the disc menu of the DVD recorder will appear device_name INFO Shows the play menu of the connected devi
30. arching channels operating Media Play USB or Plug amp Play initial setup etc e When connecting or removing the HDMI cable please make sure to search devices again or turn your TV off and on again e Check if the Anynet Function of Anynet device is set on want to start Anynet e Check if the Anynet device is properly connected to the TV and check if the Anynet HDMI CEC is set to On in the Anynet Setup menu e Press the TOOLS button to display the Anynet menu and select a menu you want want to exit Anynet e Select View TV in the Anynet menu e Press the SOURCE button on the TV remote control and select a non Anynet device e Press V CH A PRE CH and FAV CH to change the TV mode Note that the channel button operates only when a tuner embedded Anynet device is not connected Anynet does not work The message Connecting to e You cannot use the remote control when you are configuring Anynet or switching to a view mode Anynet device appears onthe e Use the remote control when the Anynet setting or switching to view mode is complete screen The Anynet device does not play You cannot use the play function when Plug amp Play initial setup is in progress The connected device is not e Check whether or not the device supports Anynet functions displayed e Check whether or not the HDMI cable is properly connected e Check whether Anynet HDMI CEC is set
31. ation Zoom2 Use for a stronger magnification Wide Fit Enlarges the aspect ratio of the picture to fit the entire screen Available with HD 1080i 720p signal in 16 9 mode 4 3 Sets the picture to basic 4 3 mode Do not watch in 4 3 format for a long time Traces of borders displayed on the left right and center of the screen may cause image retention screen burn which are not covered by the warranty Screen Fit Displays the full image without any cut off when HDMI 720p 1080i 1080p or Component 1080i 1080p signals are inputted NOTE After selecting Zoom1 Zoom2 or Wide Fit 1 Press the button to select Position 2 Press the ENTER C button 3 Press the A or Y button to move the picture up or down 4 Press the ENTER C button 5 Press the button to select Reset 6 Press the ENTERC button to reset the picture to its default position After selecting Screen Fit in HDMI 1080i 1080p or Component 1080i 1080p mode you may need to center the picture 1 Press the lt or gt button to select Position 2 Press the ENTERC button 3 Press the A V lt or gt button to move the picture 4 Press the ENTERC button 5 Press the lt or gt button to select Reset 6 Press the ENTER C button HD High Definition 16 9 1080i 1080p 1920x1080 720p 1280x720 Settings can be adjusted and stored for each external device you have connected to an in
32. ce E g If a DVD recorder is connected the play menu of the DVD recorder will appear Recording recorder Starts recording immediately using the recorder This is only available for devices that support the recording function Stop Recording recorder Stops recording Receiver Sound is played through the receiver If more than one recording device is connected they are displayed as recorder and if only one recording device is connected it will be represented as device_name i Setting Up Anynet MENU II Application gt Anynet HDMI CEC gt ENTER C E Setup Anynet HDMI CEC Off On To use the Anynet Function Anynet HDMI CEC must be set to On Q when the Anynet HDMI CEC function is disabled all the Anynet related operations are deactivated Auto Turn Off No Yes Setting an Anynet Device to turn off automatically when the TV is turned off amp If Auto Turn Off is set to Yes running external devices will turn off at the same time as the TV powers off However a device may not turn off if recording is in progress amp May not be enabled depending on the device a Switching between Anynet Devices 1 Anynet devices connected to the TV are listed BQ f you cannot find a device you want press the Red button to refresh the list 2 Select a device and press the ENTER C button You can switch to the selected device The Device List menu will only appear when you set Anyne
33. ce List Speaker Select Specifications Standby mode Symbol T Timer Title Tools Troubleshooting TV Speaker U USB Drive V Video Formats Videos Virtual Surround Volume W Wall Mount Warm White Balance 24 33 32 30 16 30 15 23 15 23 20 28 24 12 19 40 20 29 37 19 25 27 26 18 34 17 16
34. chnology Dialog Clarity Off On standard sound mode only This function allows you to increase the intensity of a voice over background music or sound effects so that dialog can be heard more clearly Preferred Language digital channels only Digital TV broadcasts are capable of A simultaneous transmission of many audio tracks B for example simultaneous translations of the program into foreign languages You can only select a language among the ones being broadcasted Multi Track Sound MTS analog channels only H Mono Choose for channels that are broadcasting in mono or if you are having 2 difficulty receiving a stereo signal E Stereo Choose for channels that are broadcasting in stereo E SAP Choose to listen to the Separate Audio Program which is usually a foreign language translation amp Depending on the particular program being broadcast you can listen to Mono Stereo or SAP Auto Volume Off Normal Night To equalize the volume level on each channel set to Normal E Night This mode provides an improved sound experience compared to Normal mode making almost no noise It is useful at night Speaker Select External Speaker TV Speaker A sound echo may occur due to a difference in decoding speed between the main speaker and the audio receiver In this case set the TV to External Speaker amp When Speaker Select is set to External Speaker the volume and MUTE buttons w
35. de the software You can find information regarding our call centers and how to download products and software Advanced Features MediaPlay Enjoy photos music and or movie files saved on a USB Mass Storage Class MSC device MENU II Application Media Play USB ENTER Wig sum A Change Device D View Devices Enter D Return i Connecting a USB Device 1 Turnon your TV TV Rear Panel 2 Connect a USB device containing photo music and or movie files to the USB am HDD port on the back or side panel of the TV 8 3 When USB is connected to the TV popup window appears Then you can select m H Media Play mm IEC p ei USB Drive A it might not work properly with unlicensed multimedia files Q Need to Know List before using Media Play USB e MTP Media Transfer Protocol is not supported e The file system supports FAT16 FAT32 and NTFS e Certain types of USB Digital camera and audio devices may not be compatible with this TV e Media Play only supports USB Mass Storage Class MSC devices MSC is a Mass Storage Class Bulk Only Transport device Examples of MSC are Thumb drives Flash Card Readers and USB HDD USB HUB are not supported Devices should be connected directly to the TV s USB port e Before connecting your device to the TV please back up your files to prevent them from damage or loss of data SAMSUNG is not responsible for any data file damage or data loss
36. e TV Picture Test Use to check for picture problems Yes If the test pattern does not appear or there is noise in the test pattern select Yes There may be a problem with the TV Contact Samsung s Call Center for assistance 1 800 SAMSUNG No If the test pattern is properly displayed select No There may be a problem with your external equipment Please check your connections If the problem persists refer to the external device s user manual Sound Test Use the built in melody sound to check for sound problems A if you hear no sound from the TV s speakers before performing the sound test make sure Speaker Select is set to TV Speaker in the Sound menu The melody will be heard during the test even if Speaker Select is set to External Speaker or the sound is muted by pressing the MUTE button Yes If you can hear sound only from one speaker or not at all during the sound test select Yes There may be a problem with the TV Contact Samsung s Call Center for assistance 1 800 SAMSUNG No If you can hear sound from the speakers select No There may be a problem with your external equipment Please check your connections If the problem persists refer to the external device s user manual Signal Information Digital channels only An HD channel s reception quality is either perfect or the channels are unavailable Adjust your antenna to increase signal strength Troubleshooting If the TV seems to have a pr
37. ected via HDMI or Component p 22 Caption must be activated on the external device p 22 There is a plastic smell from the TV This smell is normal and will dissipate over time The TV Signal Information is unavailable in the Self Diagnostic Test menu This function is only available with digital channels from an Antenna RF Coax connection p 23 The TV is tilted to the side Remove the base stand from the TV and reassemble it The channel menu is greyed out unavailable The Channel menu is only available when the TV source is selected Your settings are lost after 30 minutes or every time the TV is turned off If the TV is in the Store Demo mode it will reset audio and picture settings every 30 minutes Change the settings from Store Demo mode to Home Use mode in the Plug amp Play procedure Press the SOURCE button to select TV mode and go to MENU Setup Plug amp Play ENTER C p 8 You have intermittent loss of audio or video You see small particles when you look closely at the edge of the frame of the TV Check the cable connections and reconnect them Loss of audio or video can be caused by using overly rigid or thick cables Make sure the cables are flexible enough for long term use If mounting the TV to a wall we recommend using cables with 90 degree connectors This is part of the product s design and is not a defect The PIP menu is not available
38. een English 17 sounjyeey oisegq 0 Basic Features Picture Reset OK Cancel Resets your current picture mode to its default settings al Setting up the TV with Your PC Set the input source to PC MENU II gt Picture gt ENTER C Auto Adjustment Adjust frequency values positions and fine tune the settings automatically amp Not available when connecting with an HDMI DVI cable Screen E Coarse Fine Removes or reduces picture noise If the noise is not removed by Fine tuning alone then adjust the frequency as best as possible Coarse and Fine tune again After the noise has been reduced readjust the picture so that it is aligned to the center of screen E Position Adjust the PC s screen positioning if it does not fit the TV screen Press the A or W button to adjust the Vertical Position Press the lt or gt button to adjust the Horizontal Position E Image Reset Resets the image to default settings Using Your TV as a Computer PC Display Setting Up Your PC Software Based on Windows XP Depending on the version of Windows and the video card the actual screens on your PC will probably look different but the same basic set up information will apply in most cases If not contact your computer manufacturer or Samsung Dealer 1 Click on Control Panel on the Windows start menu 2 Click on Appearance and Themes in the Control Panel window and a display dialog box
39. elect additional channels digital being broadcasted by the same station For example to select channel 54 3 press 54 then press and 3 Adjusts the volume Brings up the OSD Displays Media Play p 25 SOURCE HE cuust LEM la MENU Quickly select frequently used functions 1001 Returns to the previous menu RETURN Buttons used in the Channel List Media Play menu etc Use these buttons in Media Play and Anynet modes p 25 31 L Controls recording for Samsung recorders that have the Anynet feature Installing batteries Battery size AAA sas sont a 2 te CA ELTTTTE Cida 2 tannunnnt SAMSUNG amp NOTE Displays and selects the available video sources p 12 Returns to the previous channel Cuts off the sound temporarily Changes channels Displays the channel list on the screen p 13 Displays Favorite Channel Lists on the screen p 13 Displays information on the TV screen Selects the on screen menu items and changes the values seen on the menu Exits the menu S MODE Press to select the sound mode p 18 SLEEP Automatically shuts off the TV at a preset time p 20 MTS Press to choose stereo mono or Separate Audio Program SAP broadcast p 19 P MODE Press to select the picture mode p 15 P SIZE Selects the picture size p 17 CC Controls the caption decoder
40. fer to the dimensions prior to performing installation of your TV Not responsible for typographical or printed errors 2010 Samsung Electronics America Inc English 41 Other Information A Amplify Antenna Anynet AUDIO OUT Auto Adjustment Auto Volume B Background Music Balance L R Basic View Batteries Black Tone Blanking Bracket Brightness C Cable Tie Change PIN Channel Menu Clock Color Tone Component Connecting to a PC Connecting to an Audio Device D DIGITAL AUDIO OUT Divx VOD D sub Dynamic Dynamic Contrast E Edit Name Editing Channels Energy Saving Equalizer External Speaker 4 2 English 10 18 14 31 10 18 19 30 18 29 16 34 15 34 21 13 19 17 9 11 10 31 30 11 15 16 12 14 16 18 19 F FAV CH button Favorite Channel Film Mode Fine Tune Flesh Tone Frequency H HDMI HEADPHONE Home Theater Installation Space L Language License M Media Play Melody Menu Transparency Mono Music N Navigate O Optimal resolution P Photos Picture Size PIP Picture in Picture Plug amp Play Power Indicator 7 13 13 17 15 16 11 9 31 10 10 31 22 40 25 23 23 19 28 12 11 28 17 30 23 R Receiver Recording Remote Control Repeat Mode RGB Only Mode Rotate S Select All Self Diagnosis Sharpness Signal Information Sleep Timer Slide Show Software Upgrade Sour
41. function during play amp Only displays the files with MP3 and PCM file extension Other file extensions are not displayed even if they are saved on the i C Pause lt gt Jump 2 Tools D Retum same USB device amp If the sound is abnormal when playing MP3 files adjust the Equalizer in the Sound menu An over modulated MP3 file may cause a sound problem Photos Viewing a Photo or Slide Show 1 Press the lt or gt button to select Photos then press the ENTER C button in the Media Play menu 2 Press the lt gt A button to select the desired photo in the file list 3 Press the ENTER C button or gt Play button While a photo list is displayed press the gt Play ENTER LC button on the remote control to start the slide show All files in the file list section will be displayed in the slide show During the slide show files are displayed in order f gt Norma CY Pause lt p Previous Next 4 Tools 5 Retum Music files can be automatically played during the Slide Show if the Background Music is set to On amp The BGM Mode cannot be changed until the BGM has finished loading 28 English a Playing Multiple Files Playing selected video music photo files 1 Press the Yellow button in the file list to select the desired file 2 Repeat the above operation to select multiple files 22 Mo R Movie 02 avi
42. he setting you ve chosen set to Activate Volume Set the desired volume level 20 English Source Select TV or USB content to be played when the TV is turned on automatically USB can be selected only when a USB device is connected to the TV Antenna when the Source is set to TV Select Air or Cable Channel when the Source is set to TV Select the desired channel Contents when the Source is set to USB Select a folder in the USB device containing music or photo files to be played when the TV is turned on automatically amp NOTE e If there is no music file on the USB device or the folder containing a music file is not selected the Timer function does not operate correctly e When there is only one photo file in the USB the Slide Show will not play e If a folder name is too long the folder cannot be selected e Each USB you use is assigned its own folder When using more than one of the same type of USB make sure the folders assigned to each USB have different names Repeat Select Once Everyday Mon Fri Mon Sat Sat Sun or Manual to set at you convenience If you select Manual you can set up the day you want to activate the timer The v mark indicates the day is selected Auto Power Off available only when the TV is turned on by the Timer The TV will be automatically turned off after 3 hours of being left idle to prevent overheating D Locking Programs MENU II Setup Security g
43. heck the Symbol D This function can be used by pressing the Note Step by Step Guide TOOLS button on the remote control Indicates additional information Check here for instructions on how to open the relevant submenu within the OSD on screen display English 3 Getting Started e Excellent Digital Interface amp Networking With a built in HD digital tuner nonsubscription HD broadcasts can be viewed without a cable box STB Set Top Box satellite receiver Set Top Box e Media Play Allows you to play music files pictures and movies saved on a USB device p 25 e Self Diagnosis You can check to make sure picture and sound operate normally p 23 Accessories amp Please make sure the following items are included with your LED TV If any items are missing contact your dealer amp The items colors and shapes may vary depending on the models e Remote Control BN59 00996A amp Batteries AAA x 2 e Cleaning Cloth BN63 01798B e Owner s Instructions e Power Cord 3903 000527 e Warranty Card Safety Guide Quick Setup Guide FF M4 X L8 Blanking Bracket BN63 06542B Cable Tie 26 inch model Only BN61 05596A z Q Holder Wire stand Holder Wire SEA Holder Ring 4EA BN61 05491A BN61 05373A BN61 05280A 26 inch model Only 26 inch model Only 26 inch model Only amp For best cable connection to this product be sure to use cables with a maximum thickness as below j e Maximum
44. ight Dark Set the Transparency of the menu E Melody Off Low Medium High Set so that a melody plays when the TV is turned on or off p Picture In Picture PIP PIP You can watch the TV tuner and one external video source simultaneously PIP Picture in Picture does not function in the same mode MENU II gt Setup gt PIP gt ENTER NOTE For PIP sound refer to the Sound Select instructions PIP window will disappear e You may notice that the picture in the PIP window becomes slightly unnatural when you use the main screen to view a game or karaoke e While V Chip is in operation the PIP function cannot be used PIP Settings If you turn the TV off while watching in PIP mode the Main picture Sub picture Component HDMI1 DVI HDMI2 HDMI3 HDMI4 TV PC E PIP Off On Activate or deactivate the PIP function HB Air Cable Air Cable Select either Air or Cable as the input source for the sub screen H Channel Select the channel for the sub screen E Size mj _ Select a size for the sub picture E Position 4 9 FI b sub picture E Sound Select Main Sub You can choose the desired sound Main Sub in PIP mode Select a position for the Support Menu MENU II Support gt ENTERC Self Diagnosis Q Self Diagnostic might take few seconds this is part of the normal operation of th
45. ill not operate and the sound settings will be limited amp When Speaker Select is set to External Speaker TV Speaker Off External Speaker On amp When Speaker Select is set to TV Speaker TV Speaker On External Speaker On amp If there is no video signal both speakers will be mute SPDIF Output SPDIF Sony Philips Digital Interface is used to provide digital sound reducing interference going to speakers and various digital devices such as an A V Receiver Home theater Audio Format During the reception of a digital TV broadcast you can select the Digital Audio output SPDIF format from the options PCM or Dolby Digital E Audio Delay Correct audio video sync problems when watching TV or video and when listening to digital audio output using an external device such as an AV receiver Oms 250ms Sound Reset OK Cancel Reset all sound settings to the factory defaults D Setting the Time MENU II Setup gt Time gt ENTER C Time H Clock Setting the clock is for using various timer features of the TV The current time will appear every time you press the INFO button Q if you disconnect the power cord you have to set the clock again Clock Mode Auto Manual Auto Set the current time automatically using the time from a digital channel amp The antenna must be connected in order to set the time automatically Manual Set the current time manually amp Depending
46. information Vv Monthly Sorts and shows photo files by month Vv English 29 soinjee4 peoueapy vo Advanced Features Videos Music Photos Play Option menu During file playback press the TOOLS button Category Operation Videos Music Photos Title You can move directly to another Title Vv Repeat Mode You can play movie and music files repeatedly Vv Vv Picture Size You can adjust the picture size to your preference v Mode1 Mode2 Original Picture Setting You can adjust the picture setting p 15 16 17 18 Vv Vv Sound Setting You can adjust the sound setting p 18 19 Vv Vv Vv Subtitle Setting You can play the video with Subtitles This function only works if the subtitles are the v same file name as the video Stop Slide Show You can start or stop a slide show v Start Slide Show Slide Show Speed You can select the slide show speed during the slide show Vv Background Music You can set various slide show effects Vv Zoom You can zoom into images in full screen mode Vv Rotate You can rotate images in full screen mode Vv Information You can see detailed information about the played file Vv Vv Vv Settings Using the Setup MenuSettings E Continuous Movie Play Help Resume Play On Off Select to display the help pop up message for continuous movie playback E Get DivX VOD registration code Shows the registration code authorized for the T
47. instructions provided with the wall mount Contact a technician for assist injury ance when installing the wall mount bracket Samsung Electronics is not responsible for any damage to the product or to yourself or others if you elect to install the TV on your own Wall Mount Kit Specifications VESA amp The wall mount kit is not supplied but sold separately Install your wall mount on a solid wall perpendicular to the floor When attaching to other building materials please contact your nearest dealer If installed on a ceiling or slanted wall it may fall and result in severe personal injury amp NOTE Standard dimensions for wall mount kits are shown in the table below When purchasing our wall mount kit a detailed installation manual and all parts necessary for assembly are provided Do not use screws that do not comply with the VESA standard screw specifications Do not use screws that are longer than the standard dimension or do not comply with the VESA standard screw specifications Screws that are too long may cause damage to the inside of the TV set For wall mounts that do not comply with the VESA standard screw specifications the length of the screws may differ depending on the wall mount specifications Do not fasten the screws too strongly this may damage the product or cause the product to fall leading to personal injury Samsung is not liable for these kinds of accidents Samsung is not liable for product dam
48. l with a strong string and then tie the string tightly amp NOTE e Install the TV near to the wall so that it does not fall backwards It is safe to connect the string so that the clamps fixed on the wall are equal to or lower than the clamps fixed on the TV eet tee Jp eetee e Untie the string before moving the TV 4 Verify all connections are properly secured Periodically check connections for any sign of fatigue for failure If you have any doubt about the security of your connections contact a professional installer 3 6 English Troubleshooting If the TV seems to have a problem first try this list of possible problems and solutions If none of these troubleshooting tips apply visit www samsung com then click on Support or call Samsung customer service at 1 800 SAMSUNG Issues Solutions and Explanations Poor picture The TV image does not look as good as it did in the store First of all please perform the Picture Test and confirm that your TV is properly displaying test image go to MENU Support Self Diagnosis Picture Test p 23 If the test image is properly displayed the poor picture may caused by the source or signal e If you have an analog cable satellite box upgrade to an HD digital set top box Use HDMI or Component cables to deliver HD high definition picture quality e Cable Satellite subscribers Try HD stations from the channel line up e Antenna co
49. l List Add delete or set Favorite channels and use the program guide for digital broadcasts MENU MI gt Channel Channel List gt ENTER G Select a channel in the All Channels Added Channels Favorite or Programmed screen by pressing the A and ENTERC buttons Then you can watch the selected channel S SUUEYD Pappy A Antenna B Zoom W Select gt Page 4 Tools All Channels Shows all currently available channels H Added Channels Shows all added channels Favorite Shows all favorite channels Programmed Shows all currently reserved programs amp Using the color buttons with the Channel List ARed Antenna Switches to Air or Cable Green Zoom Enlarges or shrinks a channel number Yellow Select Selects multiple channel lists Select desired channels and press the Yellow button to set all the selected channels at the same time The v mark appears to the left of the selected channels Page Move to next or previous page A Tools Displays the Channel List option menu The options menus may differ depending on the situation Channel Status Display Icons Icons Operations vV A channel selected y A channel set as a Favorite A reserved Program a Using Favorite Channels MENU II gt Channel Channel List gt ENTERC Add to Favorite Delete from Favorite Set channels you watch frequently as Favorites 1 Select a channel and pre
50. n slot on the product 4 Lock the lock amp These are general instructions For exact instructions see the User manual supplied with the locking device The locking device has to be purchased separately amp The location of the Kensington slot may be different depending on the TV model Securing the TV to the Wall do not hang over or destabilize the TV doing so may cause the TV to tip over resulting in serious injuries or death Follow all safety precautions provided in the included Safety Flyer For added stability and safety install Caution Pulling pushing or climbing on the TV may cause the TV to fall In particular ensure that your children the anti fall device as follows To Avoid the TV from Falling 1 Put the screws into the clamps and firmly fasten them onto the wall Confirm that the screws have been firmly installed onto the wall You may need additional material such as an anchor depending on the type of wall Since the necessary clamps screws and string are not supplied please purchase these additionally 2 Remove the screws from the center back of the TV put the screws into the clamps and then fasten the screws onto the TV again Q Screws may not be supplied with the product In this case please purchase the screws of the following specifications e Fora 19 22 inch M4 e Fora 23 65 inch M8 3 Connect the clamps fixed onto the TV and the clamps fixed onto the wal
51. nglish 5 Getting Started The product color and shape may vary depending on the model Power Indicator source MENU vor v cena C Speakers j Remote control sensor Remote control sensor Aim the remote control towards this spot on the TV SOURCE C Toggles between all the available input sources In the on screen menu use this button as you would use the ENTER C button on the remote control MENU Displays an on screen menu the OSD on screen display of your TV s features VOL Adjusts the volume In the OSD use the VOL buttons as you would use the lt and gt buttons on the remote control V CHA Changes the channels In the OSD use the W CH A buttons as you would use the Vv and A buttons on the remote control Power Indicator Blinks and turns off when the power is on and lights up in standby mode Power Turns the TV on or off Standby mode Do not leave your TV in standby mode for long periods of time when you are away on a holiday for example A small amount of electric power is still consumed even when the power button is turned off It is best to unplug the power cord 6 English Viewing the Remote Control This is a special remote control for the visually impaired and has Braille points on the Power Channel and Volume buttons Turns the TV on and off Selects the HDMI mode directly Press to directly access channels Press to s
52. nnection Try HD stations after performing Auto program Many HD channels are upscaled from SD Standard Definition contents e Adjust the Cable Sat box video output resolution to 1080i or 720p The picture is distorted macroblock error small block dots pixelization e Compression of video contents may cause picture distortion especially in fast moving pictures such as sports and action movies e Low signal level can cause picture distortion This is not a TV problem e Mobile phones used close to the TV cca up to 1m may cause noise in picture on analog and digital TV Color is wrong or missing e If you re using a component connection make sure the component cables are connected to the correct jacks Incorrect or loose connections may cause color problems or a blank screen There is poor color or brightness e Adjust the Picture options in the TV menu go to Picture mode Color Brightness Sharpness p 15 e Adjust Energy Saving option in the TV menu go to MENU Picture Eco Solution Energy Saving p 16 e Try resetting the picture to view the default picture settings go to MENU Picture Reset p 18 There is a dotted line on the edge of the screen e If the picture size is set to Screen Fit change it to 16 9 p 17 e Change cable satellite box resolution The picture is black and white e If you are using an AV composite input connect the video cable yellow to the Green
53. oblem refer to this description amp If none of these troubleshooting tips apply contact the Samsung customer service center English 23 sounjyeey oisegq 0 Basic Features Software Upgrade Software Upgrade can be performed downloading the latest firmware from www samsung com to a USB memory device Current Version the software already installed in the TV amp Software is represented as Year Month Day_Version Software Upgrade Current Version 2010 01 18 000001 By USB gt si ses Alternative Software Move Enter 5 Return Installing the Latest Version E By USB Insert a USB drive containing the firmware upgrade file downloaded from www samsung com into the TV Please be careful not to disconnect the j power or remove the EE USB drive until upgrades i fil are complete The TV will be turned off and on automatically after completing the firmware upgrade When software is upgraded video and audio settings you have made will return to their default settings We advise you to to write down your settings so that you can easily reset them after the upgrade TV Side Panel cm USB Drive E Alternative Software Not available 24 English HD Connection Guide Refer to this information when connecting external devices to the TV Contact Samsung View this information when your TV does not work properly or when you want to upgra
54. on the broadcast station and signal the auto time set up may not be correct In this case set the time manually English 19 sounjyeey oisegq 0 Basic Features Clock Set Set Month Day Year Hour Minute and am pm manually Available only when Clock Mode is set to Manual You can set the Month Day Year Hour and Manual directly by pressing the number buttons on the remote control DST Daylight Saving Time Off On Switches the Daylight Saving Time function on or off This function is on y available when the Clock Mode is set to Auto Time Zone Select your time zone This function is on y available when the Clock Mode is set to Auto Using the Sleep Timer MENU I Setup Time Sleep Timer gt ENTER G E Sleep Timer Automatically shuts off the TV after a preset period of time 80 60 90 120 150 and 180 minutes To cancel the Sleep Timer select Off p Setting the On Off Timer MENU II Setup gt Time Timer 1 gt ENTER E Timer 1 Timer 2 Timer 3 Three different on off timer settings can be made You must set the clock first On Time vogo A E Off Time vacuo M E Volume Source Antenna Channel A a fF ww Git FF a Repeal Sun Mon Tue Wed Thu Fri Sat Once ZHEHEE EH E 4 gt Move Adjust 4 Enter 5 Return On Time Off Time Set the hour minute and activate inactivate To activate the timer with t
55. onary graphics and images on screen such as the dark sidebars on no expanded standard format television video and programming should be limited to no more than 5 of the total television viewing per week Additionally viewing other stationary images and text such as stock market reports video game displays station logos web sites or computer graphics and patterns should be limited as described above for all televisions Displaying stationary images that exceed the above guidelines can cause uneven aging of LED Displays that leave subtle but permanent burned in ghost images in the LED picture To avoid this vary the programming and images and primarily display full screen moving images not stationary patterns or dark bars On LED models that offer picture sizing features use these controls to view different formats as a full screen picture Be careful in the selection and duration of television formats used for viewing Uneven LED aging as a result of format selection and use as well as burned in images are not covered by your Samsung limited warranty e SAMSUNG ELECTRONICS NORTH AMERICAN LIMITED WARRANTY STATEMENT Subject to the requirements conditions exclusions and limitations of the original Limited Warranty supplied with Samsung Electronics SAMSUNG products and the requirements conditions exclusions and limitations contained herein SAMSUNG will additionally provide Warranty Repair Service in the United States on SAMSUNG products purchased
56. p 22 e Use the remote control within 23 feet from the TV Bright light may affect the performance of the remote control Avoid use when nearby fluorescent lights or neon signs The color and shape may vary depending on the model English 7 LO peyeys Buiyje5 Getting Started Connecting to an Antenna When the TV is initially powered on basic settings proceed automatically amp Connecting the power cord and antenna tf he size of the cable mold part was an abnormal shape the part may not be connected to the input port properly VHF UHF Antenna Antenna Cable Not Supplied Cable ANT OUT Plug amp Play Initial Setup When the TV is initially powered on a sequence of on screen prompts will assist in configuring basic settings Press the POWER button Plug amp Play is available only when the Input source is set to TV amp To return to the previous step press the Red button 1 2 6 7 Selecting a language Press the A or button then press the ENTER C button POWER Select the desired OSD On Screen Display language Selecting Store Demo Press the lt or gt button then press the ENTER C4 button or Home Use e Select the Home Use mode Store Demo Mode is for retail environments e To return the unit s settings from Store Demo to Home Use standard Press the volume button on the TV When you see the volume OSD press and hold MENU
57. ption menu 44 REW or gt gt FF button file list can move to next or previous page different depending on the contents Operation Buttons AJ Tools Disp Using the Videos Playing Video 1 Press the lt or gt button to select Videos then press the ENTER C button in the Media Play menu 2 Press the lt gt A button to select the desired 3 Press the ENTER C button or gt Play button The selected file is displayed on the top with its video in the file list playing time If video time information is unknown play time and progress bar are not displayed During video playback you can search using the lt and gt button amp In this mode you can enjoy movie clips contained on a Game but you cannot play the Game itself e Supported Subtitle Formats 00 04 03 00 07 38 Movie 01 avi Name File extension Format MPEG 4 time based text ttxt XML SAMI smi HTML SubRip rt string based SubViewer sub string based Micro DVD sub or txt string based 26 English sum 4 Pause lt gt Jump 2 Tools D Return Supported Video Formats File Extension Container Video Codec Resolution sans roa Audio Codec Divx 3 11 4 x 5 1 6 0 920x1080 6 30 8 avi AVI XviD 920x1080 6 30 8 MP3 AC3 LPCM mkv MKV H 264 BP MP H
58. put on the TV Input Source Picture Size ATV AV 16 9 Zoom1 Component 480i 480p Zoom2 4 3 DTV 1080i 16 9 4 3 Wide Fit Component 1080i 1080p Screen Fit HDMI 720p 1080i 1080p PC 16 9 4 3 Digital Noise Filter Off Low Medium High Auto Auto Visualization If the broadcast signal received by your TV is weak you can activate the Digital Noise Filter feature to reduce any static and ghosting that may appear on the screen Q When the signal is weak try other options until the best picture is displayed Auto Visualization When changing analog channels displays signal strength QB Only available for analog channels amp When bar is green is that the best possible signal MPEG Noise Filter Off Low Medium High Auto Reduces MPEG noise to provide improved picture quality HDMI Black Level Normal Low Selects the black level on the screen to adjust the screen depth amp Available only in HDMI mode Film Mode Off Auto1 Auto2 Sets the TV to automatically sense and process film signals from all sources and adjusts the picture for optimum quality amp Available in TV AV COMPONENT 480i 1080i and HDMI 480i 1080i Auto Protection Time 2 hours 4 hours 8 hours 10 hours Off Set the time the screen remains idle with a still image until the screen saver is activated The screen saver prevents the formation of ghost images on the scr
59. rt MenUscccccsssssssssseevssssssesssessssssssesssesseeesesees 29 e Viewing the Remote Control 7 oe e Plug amp Play Initial Setup cect teeters 8 e Media Plassa eai aa 25 ee en i Screen Display 26 e Connecting to an AV DeVICE eerie 9 Playing Multiple Files 29 Connecting to an Audio Device 10 Media Play Additional Functions 29 CONNECTING toa PO issar ssrisienini tiesa 11 E EE AI A E 31 Changing the Input SOUPCE s sisien 12 Setting Up Anynet 32 Switching between Anynet Devices 32 Listening through a Receiver 33 e How to Navigate MenUS sssssssesesesssesrrssrtreresesesereses 12 Troubleshooting for Anynet 33 Channel MONU acts bettie ciate 13 Seeing Channels 13 7 Memorizing channels 14 e Assembling the Cables 0 cece Editing Channels 14 e Installing the Wall Mount Other Features 14 e Anti theft Kensington LOCK ccccceeeeeeeeeeeees 36 e Picture MENU oot 15 Securing the TV to the Wall csseessesssseesteees 36 rs Changing the Preset Picture Mode 15 To Avoid the TV from Falling 36 E Adjusting Picture Settings 15 TOUDIOSH CONG aysana 37 z Economical Solutions 16 Storage and Maintenance 39 Changing the Picture Options 16 LICCNSC E 40 Setting up the TV with Your PC 18 Specifications nsss 40 SOUND MENU anen 18 DIMENSIONS c ccccccccccccuececcccuececcuuuccceuuuueeeuauerecenans 41 Changing the Preset Sound Mode 18 TS TeS O 42 Adjusting Sound Settings 18 Sound Settings 18 C
60. se e Check the cable connections Make sure a video cable is not connected to an audio input e For antenna or Cable connections check the signal strength Low signal level may cause sound distortion e Perform the Sound Test as explained above English 37 UOHEULOJU BUI S0 Other Information Issues Solutions and Explanations No Picture No Video The TV won t turn on The TV turns off automatically Make sure the AC power cord is securely plugged in to the wall outlet and the TV Make sure the wall outlet is working Try pressing the POWER button on the TV to make sure the problem is not the remote If the TV turns on refer to Remote control does not work below Ensure the Sleep Timer is set to Off in the Setup menu p 20 If your PC is connected to the TV check your PC power settings Make sure the AC power cord is plugged in securely to the wall outlet and the TV When watching TV from an antenna or cable connection the TV will turn off after 10 15 minutes if there is no signal There is picture Video Check cable connections remove and reconnect all cables connected to the TV and external devices Set your external devices Cable Sat Box DVD Blu ray etc video outputs to match the connections to the TV input For example if an external device s output is HDMI TV s input HDMI Make sure your connected devices are powered on Be sure to select the TV s correct source by
61. ss the TOOLS button 2 Add or delete a channel using the Add to Favorite or Delete from Favorite menu respectively Delete Add to Favorite Timer Viewing Channel Name Edit gt a 2 D a p gt i D D z To show all Favorite channels click on the button shown on the right English 13 s m y oiseg 0 Basic Features D Memorizing channels MENU II Channel gt ENTERC Antenna Air Cable Before your television can begin memorizing the available channels you must specify the type of signal source that is connected to the TV i e an Air or a Cable system Auto Program E Air Air antenna signal E Cable Cable antenna signal H Auto Air and Cable antenna NOTE e When selecting the Cable TV system STD HRC and IRC identify various types of cable TV systems Contact your local cable company to identify the type of cable system that exists in your particular area At this point the signal source has been selected After all the available channels are stored it starts to remove scrambled channels The Auto Program menu then reappears J Editing Channels MENU II gt Channel gt Channel List gt ENTER Channel Name Edit 1 Select a channel and press the TOOLS button 2 Edit the channel name using the Channel Name Edit menu H Channel Name Edit analog channels only Assign your own channel name i Other Features MENU MI gt Channel g
62. t HDMI CEC to On in the Application menu e Switching to the selected device may take up to 2 minutes You cannot cancel the operation during the switching operation e If you have selected external input mode by pressing the SOURCE button you cannot use the Anynet function Make sure to switch to an Anynet device by using the Device List fl Recording You can make a recording of a TV Program using a Samsung recorder 1 Select Recording amp when there are more than two recording devices e When multiple recording devices are connected the recording devices are listed Select one recording device in the Device List Q when the recording device is not displayed select Device List and press the Red button to search devices 2 Press the EXIT button to exit amp You can record the source streams by selecting Recording device_name amp Pressing the Le REC button will record whatever you are currently watching If you are watching video from another device the video from the device is recorded Before recording check whether the antenna jack is properly connected to the recording device To properly connect an antenna to a recording device refer to the recording device s users manual 3 2 English J Listening through a Receiver You can listen to sound through a receiver i e Home Theater instead of the TV Speaker 1 Select Receiver and set to On 2 Press the EXIT button to exit amp f
63. t ENTER C Clear Scrambled Channel This function is used to filter out scrambled channels after Auto Program is completed This process may take up to 20 30 minutes 14 English How to Stop Searching Scrambled Channels 1 Press the ENTER C button to select Stop 2 Press the lt button to select Yes 3 Press the ENTER C4 button amp This function is only available in Cable mode Channel List Channel List Option Menu Set each channel using the Channel List menu options Add Delete Timer Viewing Select All Deselect All Option menu items may differ depending on the channel status 1 Select a channel and press the TOOLS button 2 Select a function and change its settings E Add Delete Delete or add a channel to display the channels you want amp NOTE e All deleted channels will be shown on the All Channels menu Agray colored channel indicates the channel has been deleted The Add menu only appears for deleted channels Delete a channel from the Added Channels or Favorite menu in the same manner E Timer Viewing You can set a desired channel to be displayed automatically at the reserved time Set the current time first to use this function 1 Press the lt 4 gt A Y buttons to select the desired channel in Channel List 2 Press the TOOLS button then select Timer Viewing 3 Scroll up or down to adjust the settings in the box or use the numeric buttons on your remote
64. t ENTERC Security The PIN input screen appears Enter your 4 digit PIN number V Chip The V Chip feature automatically locks out programs that are deemed inappropriate for children The user must enter a PIN personal identification number before any of the V Chip restrictions are set up or changed amp NOTE e V Chip is not available in HDMI Component or PC mode e The default PIN number of a new TV set is 0 0 0 0 Allow All Press to unlock all TV ratings e Block All Press to lock all TV ratings V Chip Lock Off On You can block rated TV Programs TV Parental Guidelines You can block TV programs depending on their rating This function allows you to control what your children are watching TV Y Young children TV Y7 Children 7 and over TV G General audience TV PG Parental guidance TV 14 Viewers 14 and over TV MA Mature audience ALL Lock all TV ratings FV Fantasy violence V Violence S Sexual situation L Adult Language D Sexually Suggestive Dialog The V Chip will automatically block certain categories dealing with more sensitive material For example if you block the TV Y category then TV Y7 will automatically be blocked Similarly if you block the TV G category then all the categories in the young adult group will be blocked TV G TV PG TV 14 and TV MA The sub ratings D L S V work similarly So if you block the L sub rating in TV PG then the L
65. to On in the Anynet setup menu e Search Anynet devices again e You can connect an Anynet device using the HDMI cable only Some HDMI cables may not support Anynet functions e If connection is terminated because there has been a power interruption or the HDMI cable has been disconnected please repeat the device scan The TV Program cannot be e Check whether the antenna jack on the recording device is properly connected recorded The TV sound is not output e Connect the optical cable between TV and the receiver through the receiver English 33 Other Information Assembling the Cables Stand Type Enclose the cables in the Cable Tie so that the cables are not visible through the transparent stand TPT MLZ Wall Mount Type Do not pull the cables too hard when arranging them This may cause damage to the product s connection terminals Installing the Wall Mount Attaching the Blanking Bracket When installing the TV onto a wall attach the Blanking Bracket as shown Blanking Bracket SU gy wee 34 English Preparing before installing Wall Mount To install a wall mount from another manufacturer use the Holder Ring Instal ling the Wall Mount Kit The wall mount kit sold separately allow you to mount the TV on the wall For detailed information on installing the wall mount see the
66. to enter the date and time amp Ifyou selected Once Every Week or Everyday in Repeat you can enter the date you want 4 Select OK then press the ENTER C button when done amp NOTE Only memorized channels can be reserved e Reserved programs will be displayed in the Programmed menu e When a digital channel is selected press the gt button to view the digital program BH Select All Select all the channels in the channel list E Deselect All Deselect all the selected channels amp You can only select Deselect All when one or more channels are selected Programmed in Channel List You can view modify or delete a show you have reserved to watch Programmed timer viewing is displayed here Highlight a program and press the TOOLS button to display Options E Change Info Change a show you have reserved to watch Begin with step 3 of Timer Viewing above E Cancel Schedules Cancel a show you have reserved to watch amp This deletes the highlighted or selected program s E Information Display a show you have reserved to watch You can also change the reservation Information amp Alternatively you can view Information by highlighting a program and pressing the ENTERG button Select All Deselect All Select or deselect all reserved programs Fine Tune analog channels only If the reception is clear you do not have to fine tune the channel as this is done automatically d
67. ty of the caption background Options include Default Transparent Translucent Solid and Flashing Return to Default This option sets each Size Font Style Foreground Color Background Color Foreground Opacity and Background Opacity to its default NOTE Digital Caption Options are available only when Default and Servicel Service6 can be selected in Caption Mode e The availability of captions depends on the program being broadcasted The Default setting follows the standards set by the broadcaster e The Foreground and Background cannot be set to have the same color You cannot set both the Foreground Opacity and the Background Opacity to Transparent General E Game Mode Off On When connecting to a game console such as PlayStation or Xbox you can enjoy amore realistic gaming experience by selecting the game mode NOTE e Precautions and limitations for game mode To disconnect the game console and connect another external device set Game Mode to Off in the setup menu If you display the TV menu in Game Mode the screen shakes slightly Game Mode is not available when the input source is set to TV or PC e After connecting the game console set Game Mode to On Unfortunately you may notice reduced picture quality If Game Mode is On Picture mode is set to Standard and Sound mode is set to Movie Equalizer is not available Basic Features E Menu Transparency Br
68. ure doesn t work in Component HDMI or PC modes E Caption Mode You can select the desired caption mode The availability of captions depends on the program being broadcast Default CC1 CC4 Text1 Text4 analog channels only The Analog Caption function operates in either analog TV channel mode or when a signal is supplied from an external device to the TV Depending on the broadcasting signal the Analog Caption function may or may not work with digital channels Default Service1 Service6 CC1 CC4 Text1 Text4 digital channels only The Digital Captions function works with digital channels Service1 6 may not be available in digital caption mode depending on the broadcast H_ Digital Caption Options digital channels only Size Options include Default Small Standard and Large The default is Standard Font Style Options include Default and Styles 0 to 7 The default is Style O 2 2 English Foreground Color Options include Default White Black Red Green Blue Yellow Magenta and Cyan You can change the color of the letter The default is White Background Color Options include Default White Black Red Green Blue Yellow Magenta and Cyan You can change the background color of the caption The default is Black Foreground Opacity This adjusts the opacity of text Options include Default Transparent Translucent Solid and Flashing Background Opacity This adjusts the opaci
69. uring the search and store operation If the signal is weak or distorted fine tune the channel manually Scroll to the left or right until the image is clear amp Settings are applied to the channel your currently watching amp Fine tuned channels that have been saved are marked with an asterisk on the right hand side of the channel number in the channel banner To reset the fine tuning select Reset Changing the Preset Picture Mode MENU II Picture gt Mode gt ENTERC sounjeey oisegq 0 Mode Select your preferred picture type E Dynamic Suitable for a bright room H Standard Suitable for a normal environment H Movie Suitable for watching movies in a dark room Adjusting Picture Settings Backlight Contrast Brightness Sharpness Color Tint G R MENU II Picture gt ENTERC Your television has several setting options for picture quality control amp NOTE e When you make changes to Backlight Contrast Brightness Sharpness Color or Tint G R the OSD will be adjusted accordingly In PC mode you can only make changes to Backlight Contrast and Brightness Settings can be adjusted and stored for each external device connected to the TV English 15 Basic Features J Economical Solutions The Eco Function can be used to enhance your power savings Eco Solution MENU II Picture gt Eco Solution gt ENTERC E Energy Saving Off Low
70. will appear 3 Click on Display and a display dialog box will appear Navigate to the Settings tab on the display dialog box e The correct size setting resolution Optimum 1360 x 768 pixels e f a vertical frequency option exists on your display settings dialog box the correct value is 60 or 60 Hz Otherwise just click OK and exit the dialog box P 18 English Changing the Preset Sound Mode MENU II gt Sound gt Mode ENTER C Mode E Standard Selects the normal sound mode E Music Emphasizes music over voices Movie Provides the best sound for movies HM Clear Voice Emphasizes voices over other sounds Amplify Increase the intensity of high frequency sound to allow a better listening experience for the hearing impaired i Adjusting Sound Settings MENU I Sound Equalizer gt ENTERC Equalizer Adjusts the sound mode standard sound mode only E Balance L R Adjusts the balance between the right and left speaker HM 100Hz 300Hz 1KHz 3KHz 10KHz Bandwidth Adjustment Adjusts the level of specific bandwidth frequencies E Reset Resets the equalizer to its default settings i Sound Settings MENU I Sound gt ENTER C Virtual Surround Off On standard sound mode only This function provides a virtual 5 1 channel surround sound experience through a pair of speakers using HRTF Head Related Transfer Function te
71. your receiver supports audio only it may not appear in the device list amp amp The receiver will work when you have properly connected the optical in jack of the receiver to the DIGITAL AUDIO OUT OPTICAL jack of the TV amp When the receiver i e Home Theater is set to On you can hear sound output from the TV s Optical jack When the TV is displaying a DTV air signal the TV will send out 5 1 channel sound to the receiver When the source is a digital component such as a DVD and is connected to the TV via HDMI only 2 channel sound will be heard from the receiver amp NOTE e You can only control Anynet devices using the TV remote control not the buttons on the TV The TV remote control may not work under certain conditions If this occurs reselect the Anynet device soinjee4 peoueapy vo e The Anynet functions do not operate with other manufacturers products Troubleshooting for Anynet Problem Possible Solution Check if the device is an Anynet device The Anynet system supports Anynet devices only Only one receiver home theater can be connected Check if the Anynet device power cord is properly connected Check the Anynet device s Video Audio HDMI cable connections Check whether Anynet HDMI CEC is set to On in the Anynet setup menu Check whether the TV remote control is in TV mode Check whether the remote control is Anynet compatible Anynet doesn t work in certain situations Se

Download Pdf Manuals

Related Search

Related Contents

H8 Family E10T Emulator Additional Document for User`s Manual  

Copyright © All rights reserved. Failed to retrieve file