PYLE Audio VIEW PLVWH2 User's Manual
Contents
1. 5 Receiving Positions The headphone Receiver receives audio signals omni directionally and in line of sight within certain effective ranges For best reception use th headphone within 5 meters from the emitter of the transmitter Specifications Infrared Wave Lenght 850mm Modulation Frequency Modulation Carrier Frequency L ch 2 3 MHz R ch 2 80 MHz Transmitter Input Voltage 12 VDC 2V Current lt 80mA IF Frequency L ch 2 3 MHz 15KHz R ch 2 80 MHz 15KHz Impedance 10K ohm 15 Auto On Lever Less Than 30 mV input 1KHz Auto Off Time 120 Sec 240 Sec Connecting Pin Wiring Source 1 Ground 2 Left Ch 3 Right Ch 4 GND 5 12V2. WIRELESS INFRARED TRANSMITTER AND WIRELESS INFRARED STEREO HEADPHONE ANG PLVWH2 Overview The PLVWH2 isa true wireless headphone system which uses latest high frequency modulation infrared technology You can enjoy music by simply connecting the supplied infrared transmitter to any of your audio video equipment through either a line output jack or a headphone jack This system is easy to set up within your car It provides you with ultimate personal listening freedom INFRARED TRANSMITTER RECEIVER HERDPHONE Features An optical transmission system with high frequency modulation guarantees excellent nd surround sound quality and wide effective transmission range The well designed transmitter and headphone with built in receiver are omnidirectional in sending and receiving audio signals within a 7 meter radius which are generally not susceptible to be blocked by objects between them True surround sound elegant design and rich finish of the system add into the beauty of your expesive automobile entertainment systems The signalinput levelis automatically adjusted by the built in Automatic Input Level control Circuit ALC Since this system uses infrared ray ifthe headphones receivers are placed too far from the transmitter a hissing noise may increase This is a characteristic of infrared systems and does not mean that the system is defective Do notuse this system inthe open air under direct sun
3. light as the infrared system will not work properly Precautions Operate the transmitter on 12V 100mA Operate the headphone system on3 V DC size AAA batteries x 2 Turn offthe power of the transmitter andthe system is notin use Do not open the cabinet Refer servicing to qualified personnel only Do not leave the system in a location near heat sources such as radiators or airducts orin a place subject to direct sunlight excessive dust moisture rain mechanical vibrantion or shock Do not use alcohol benzine or thinner to clean the cabinet Transmitter 1 Infrared emitter 2 Audio input R RED 3 Audio input L WHITE 4 Power 12VDC RED y T BLACK 2 3 Velcrofor Mounting IR Transmitter Headphone Infrared sensors Power Switch Stereo mono Volume Controls Battery Compartment Door Far pad Adjustable headband IR Stereo Headphone 1 Open the battery compartment door on the right of the headphone 2 Insert two size AAA batteries with correct polarity 3 Close the battery compartment How to use I Turn on the audio video equipment 2 Turn on the power switch for connected to the transmitter headphone A 3 Adjust volume control on the 4 Turn on the stereo switch for left side Do not cover the sensors stereo effect For Mono while adjusting volumes audio video equipment turn the switch to the mono position
Download Pdf Manuals
Related Search