PYLE Audio PT-600A User's Manual
Contents
1. PYLE PRO INTEGRATED STEREO AMPLIFIER PT 600A INTEGRATED STEREO AMPLIFIER OPERATION MANUAL PRECAUTIONS Thank you for purchasing this HI FI product Taking time to read these operating instructions carefully before use will acquaint you fully with all its features and help ensure optimum performance In order to simplify the explanation illustrations may sometimes differ from the originals CAUTION DO NOT OPEN CAUTION TO REDUCE THE RISK OF ELECTRIC SHOCK DO NOT REMOVE COVER OR BACK NO USER SERVICEABLE PARTS INSIDE REFER SERVICING TO QUALIFIED SERVICE PERSONNEL The lightning flash with arrowhead symbol within an equilateral triangle is intended to alert the user to the presence of uninsulated dangerous voltage within the product s enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons The exclamation point within an equilateral triangle is intended to alert the user to the presence of important operating and maintenance literature servicing instructions in the accompanying the appliance WARNING To prevent fire or shock hazard do not expose this appliance to rain or moisture Power plug When disconnecting the power cord from the power outlet always take hold of the plug and not the wire and pull free Never connect or disconnect the power plug with wet hands since you may r2. Set the BASS and TREBLE tone controls to the 0 center position After these checks press the POWER switch to turn on the power If you find a remote standby indicator is lighted the power amplifier is in remote standby state a Press the power switch off and press it once again after the remote standby indicator is off b Using the remote control to switch on the power Playing a program source 1 Press the desired input selector switch to select the program source which you wish to listen to To listen to record press the PHONO switch To listen to radio broadcast Press the TUNER switch To listen to a compact disc Press the CD switch To listen to a component connected to VIDEO terminals Press the AV1 AV2 switch To listen to a tape Press the TAPE switch 2 Operate the program source unit 3 Gradually turn the VOLUME control clockwise until the desired volume level is obtained 4 To adjust the tone quality adjust the BASS and TREBLE control When you wish to use headphones insert the plug of the headphones into the PHONES jack RECORDING TAPE A record compact disc broadcast of the program source of a component connected to the line terminals can be recorded by the tape deck connected to the TAPE recording REC terminals 1 Select the input selector switch corresponds to the program source PHONO CD TUNER AV1 AV2 which is to be recorded 2 Start playing the program source 3 Operate
3. the tape deck and press the REC key The volume Tone and other controls including graphic equalizer have no effect on the recording level or sound quality of the signals being recorded even they are operated OPERATION PT 600A 1 Power Switch 2 AM FM Selector Memory Scan Hold 3 Volume Control Key 4 External Processor 5 Preset EQ 6 CD Control Key STOP CLOSE OPEN 4 PLAY PAUSE gt 71 SKIP FAST BACKWARD 44 1 SKIP FAST FORWARD gt We 7 Function Keys PHONO TUNER TAPE AV1 AV2 CD REMOTE CONTROL Remote Controlling Instructions The remote control box can directly control majority of system functions of HI FI SYSTEM The functions include power control of the whole system Volume control sound field control CD operation control Tuner operation control and also source control function This remote controller may not function properly if an roadblock is located between it and the receiving unit or if the remote controller is held at an improper angle with respect to the receiving unit Battery Installation Remove the rear cover of the remote controller by sliding it backward Install two AA 1 5 V size batteries while observing the correct polarity match the and signs Sound Field Control Operation Switch the power key to connect to electric current Use PRESET EQ key to select the sound mode decided Each t
4. broadcasts from the tuner connected to the TUNER terminals 13 TAPE This switch is pressed when you wish to listen to the cassette deck connected to the tape terminal 14 TONE CONTROL TREBLE VOLUME The treble sound is emphasized when the TREBLE knob is rotated clockwise from its 0 position while it is attenuated when the knob is rotated counterclockwise 15 TONE CONTROL BASS VOLUME The bass sound is emphasized when the BASS knob is rotated clockwise from its 0 position while it is attenuated when the knob is rotated counterclockwise 16 PHONES JACK This is the jack for headphones Connect the plug on the stereo headphones for private listening Adjust the volume so that it does not hurt your ears when using the headphones Ifyou do not intend to use your headphones always ensure that you unplug them 17 MUTE Press this switch to mute the sound if resume press it again 18 REMOTE STANDBY INDICATOR The Power Amplifier is in remote standby state if the remote standby indicator is lighted OPERATING PROCEDURES TAPE TUNER m ce ni 222224 a c a u o o o Before starting operation Check that the controls have been set to the following positions before commencing operation Rotate the VOLUME control counterclockwise as far as it will go and set it at the 0 minimum volume position
5. eceive an electric shock Remember to disconnect the power plug from the power outlet when you do not intend to use the unit for a prolonged period of time Do not remove the case and bottom panel Any inspections or adjustments inside the unit may lead to malfunctions and electric shocks Do not touch any of the inside parts DO 00000 Ventilation warning The normal ventilation of the product shall not be impeded for intended use Installation precautions Do not install the unit in any of the following locations since this may result in deterioration in performance or malfunction Locations exposed to direct sunlight or near objects radiating heat such as heating appliances Locations exposed to moisture or humidity Locations with poor ventilation exposed to dust and dirt Locations which are unstable and not perfectly flat or which are susceptible to vibration BY Do not wipe with thinners Wipe the panels and case from time to time with a soft cloth Using any kind of thinner alcohol or volatile liquid will mar the surface cause blotching on the exterior and erase the markings and should therefore be avoided Do not use insecticide sprays in the vicinity Dripping warning The product shall not be exposed to dripping or splashing and that no objects filled with liquids such as vases shall be placed on the product CONNECTIONS Connection precautions When connecting either d
6. hort circuit A network TUNER TAPE PLAY 70 dB Power requirements Power voltage 220V 50Hz For U K 240V 50Hz For U S A amp Canada 110V 60 Hz Power consumption 300 Watts maximum Dimensions 420 x 135 x 230mm W x Hx D Weight 6 2 Kg Design and specifications for subject to changes without notice for improvements
7. ime the button is pressed the mode changes as follows ROCK CLASSIC FLAT TUNER OPERATION BUTTONS When the function switch is set to Tuner side Press BAND keys for selecting AM FM channel Memo Scan Press to scan the stations 0 9 stored in the station memory Memory Hold After pressing Memory Scan key Tuner will scan through station 0 9 When your desired station is reached press MEMORY HOLD to hold it OTHER Sound source can be changed directly by pressing TUNER PHONO TAPE CD or AV1 AV2 key Volume level can be adjusted by pressing VOL or keys Note Exhausted batteries may reduce the level of sensitivity of the controller SPECIFICATIONS Power output Min RMS both channels driven from 40 20 kHz with no more than 0 1 total harmonic distortion 50 watts per channel into 6 ohms Load Impedance 6 ohms Total Harmonic Distortion less than 0 0596 at 1 2 rated RMS power output Frequency response at 1 watt 20 to 20 kHz 1 dB 2dB RIAA curve deviation PHONO 20 Hz to 20 kHz 0 5 dB 0 5 dB Input sensitivity and impedance at 1 kHz for rated power output 2 5mV 47 kohms Max input capability mV at 1 kHz less than 0 1 total harmonic distortion TUNER TAPE PLAY 250 mV 47 kohms Output level 1 kHz TAPEREGC niis 250 mV into 47kohms Signal to noise ratio s
8. isconnect the power plug from the power outlet or turn off the unit s power using the POWER switch Check the left and right channels and connect properly Left to L and Right to R Insert the plugs securely Improper connection can lead to the generation of noise Compact disc player Connect the CD terminals to the OUTPUT terminals on the compact disc player using the pin plug cord AV1 AV2 terminals These terminals have an electrical performance which is equivalent to that of the CD terminals and the TUNER terminals which means that they can be used as the audio output terminals for a video disc player or TV tuner Connect these terminals to the OUTPUT terminals on the component using the pin plug cord TAPE Deck Recording connections Connect the TAPE REC terminals to the input LINE IN terminals on the tape deck using the pin plug cord TAPE PLAY terminals to the output LINE OUT terminals on the Playback connections Connect the cassette deck using the pin plug cord amp 6 9 9 He 294 e a PROCESSOR terminals These terminals are used to connect a graphic equalizer or sound processor They also come in handy for c
9. nals on the tuner using the pin plug cord PANEL INFORMATION 1 POWER SWITCH Power is supplied to the amplifier when this switch is depressed and the power is switched off when the switch is released 2 FUNCTION Press either TAPE TUNER AV1 AV2 CD PHONO the relative indicator will be grown 3 REMOTE SENSOR Work with the remote control 4 PRESET EQ Press this switch to preset one of the following kinds of music POP green color ROCK red color CLASSIC orange color and FLAT no color 5 VOLUME CONTROL This is used to control the sound heard from the speakers or through the headphones Rotate it in clockwise or in counter clockwise the volume will be increased or decreased 6 EXTERNAL PROCESSOR When this unit is connected to an external graphic equalizer or sound processor press this switch 7 MIC LEVEL VOLUME Adjust the MIC LEVEL by rotating MIC LEVEL VOLUME knob 8 MIC JACK Inserting Microphone if using 9 PHONO This switch is pressed when you wish to listen to records on the turntable PHONO connected to the PHONO terminal 10 CD This switch is pressed when you wish to listen to the compact disc player connected to the CD terminals 11 AVI AV2 This switch is pressed when this unit is connected to the external amplifier 12 TUNER This switch is pressed when you wish to listen to the radio
10. onnecting an AV audio video selector unit Use pin plug cords to connect the REC terminals to the INPUT terminals on the selected component and also to connect the PLAY terminals to its OUTPUT terminals CONNECTIONS Speaker systems Connect the speaker systems to the SPEAKERS terminals on the rear panel of the unit with the speaker cords When viewed from the front the listening position the speaker mounted on the left should be connected to the L terminals and the speaker mounted on the right should be connected to the R terminals Be sure to connect the polarities of the speaker systems and the SPEAKER terminals correctly to to If the polarity of one of the speaker systems is connected improperly sound in the central area between the speakers will appear to be missing and the position of the instruments will not be clear resulting in a loss of stereo directionality so take care when connecting When connecting do not allow the conductor of the speaker cords to be exposed from the terminals and come into contact with other terminals Front Left Front Right cO PHONO Connect the turntable s output cord L white plug to the L PHONO terminal and the R red plug to the R terminal If your turntable is equipped with a grounding cable connect it to the unit s GND terminal But disconnect it if you notice increased hum LEE EL Tuner Connect the TUNER terminals to the OUTPUT termi
Download Pdf Manuals
Related Search