PYLE Audio PHST90IBGL User's Manual
Contents
1. MODEL PHST90ICW PHST90IBK PHST90IBGL 2 1 CHANNEL MUSIC CENTER Www pyleaudio com Operating Instruction Dear customers Thank you for purchasing the 2 1 channel music center system We strongly recommend that you carefully study the operating instructions before attempting to operate the unit and that you note the listed safety information Safety information 1 This unit can be used only where the power supply is in accordance with the notes on the rear panel of the speaker system It can t be used elsewhere 2 To reduce the risk of fire or electric shock do not expose this unit to rain or moisture 3 When the unit is not being used turn the unit off 4 Do not open covers and repair by yourself Refer all servicing to qualified personnel 5 After turning off the unit if you don t start the unit again in 24 hours the time would return to the factory reset When the unit is on you can adjust the time please take the operation instruction in the owner s manual for reference 6 remote control battery The button battery has been installed in the remote control When you use it for the first time just pull out the insulation layer and you could use it now System Connection O O rO Br u PYLE Stereo Input Remote2. save control keys If you want to save one channel press and hold any one of the 10 number keys for about 2 seconds you will save the channel on the selected number key When you want to play the channel you saved just press the number key you have saved 2 Operations of Touch Key Control System a C The default main interface of this system shows current time Touch A to up down for the of the system master volume Touch OK menu to enter the first level subpage control panel On the control panel interface Touch V A you can enter into different control partitions When cursor points to the first lever subpage control panel you can touch OK menu again to enter the second level subpage or touch for the switch of different entrance options Also you can touch OK menu to enter the third level subpage to choose the function you need If you want to return to the previous subpage you can touch Menu And if no any operation is done the system will return to the default main interface in 5 seconds e How to setup clock and alarm by touch key control system a When cursor points to the clock and alarm control interface touch OK menu enter the options interface of clock alarm and alarm on off which is the second level subpage Then touch V A for needed operation or touch OK menu again to enter the third level subpage At this moment you can touch V A to adj
3. Control D S fa ee EE 4 5 6 DD co 1 Tuner Tuner 10 uen cz C es amp Gall Scroll Ok Scroll up Menu down me g Select ERS Em 15 Alarm 40 COn off J A pA A FM control area B iPod control area C Multi function control area 1 Standby mode control selector 2 Press Input mode button to select the source iPod AUX FM 3 Tuner number button 4 iPod toggle repeat button 5 iPod ok menu button 6 iPod scroll up down button 7 iPod skip lt lt gt gt button 8 Select control button 9 Adjust increase decrease button 10 Alarm on off control button 11 Tuner band control button 12 iPod menu button 13 iPod toggle shuffle button 14 iPod play pause button 15 OK Select control button 16 Mute mode control button Touch Key Control OOo a Specifications 1 Output power 2 Frequency Touch Menu to return to the previous menu Touch OK menu to enter to the menu and the operation key of the submenu OF Touch V A to scroll up or scroll down in different function interfaces Touch to control the power on off L R 150W x 1 Subwoofer 300W x 1 L R 150Hz 20kHz S
4. VICEABLE PARTS INSIDE THIS UNIT PLEASE REFER SERVICING TO QUALIFIED SERVICE PERSONNEL The lightning flash with arrowhead symbol within an equilateral triangle is instend to alert the user to the presence of uninsultated dangerous voltage within the products enclosure that may be of sufficient magnitude to constitute risk of electric shock to persons The exclamation point within an equilateral triangle is intended to alertthe user to the presence of important operating and maintenance servicing instructions in the literature accompanying the appliance WARNING TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK DO NOT EXPOSE THIS APPLIANCE TO RAIN OR MOIS TURE 1 READ INSTRUCTIONS AII safety and operating instructions should be read before the appliance is operated 2 RETAIN INSTRUCTIONS Safety and operating instructions should be retained for future reference 3 HEED WARNINGS AII warnings on the appliance and in the operating instructions should be followed 4 FOLLOW INSTRUCTIONS AII operating and use instructions should be followed 5 WATER AND MOISTURE The appliance should not be used near water near a bathtub kitchen sink laundry tub in a wet basement near a swimming pool etc 6 CARTS AND STANDS Do not place this product on an unstable cart stand tripod bracket or table 7T VENTILATION The appliance should be situated so that its location and position does not interfere with proper ventilation The appliance should not
5. be situated on a bed sofa rug or any surface that may obstruct cabinet openings 8 HEAT The appliance should be situated away from heat sources such as radiators heat registers stoves or others devices including amplifiers that produce heat 9 POWER SOURCES The appliance should be connected only to a power supply of the type described in the operating instructions or on the appliance Do not overload wall outlets extension cords or integral convenience outlets as this can result in a risk of fire or electric shock 10 POWER CORD PROTECTION Power supply cords should be routed so that they are not likely to be walked upon or pinched by items placed upon or against them paying particular attention to cords at plugs convenience receptacles and the point where they exit from the appliance 11 POLARIZED PLUG This appliance is equipped with a polarized line plug a plug having one blade wider than the other This plug will fit into the power outlet only one way This is a safety feature If you are unable to insert the plug fully into the outlet try reversing the plug If the plug still fails to fit contact your electrician to replace your obsolete outlet Do not attempt to defeat this safety feature 12 CLEANING The appliance should be cleaned only as recommended by the manufacturer Do not use chemical cleaners 13 LIGHTNING STORMS amp NO USE PERIODS The power cord should be unplugged from the outlet during lightning stor
6. ms or during long periods of non use 14 OBJECT AND LIQUID ENTRY Care should be taken that objects do not fall onto and liquids are not spilled on the amplifier or speaker 15 DAMAGE REQUIRING SERVICE The appliance should be serviced by qualified service personnel when A The power supply cord or plug has been damaged or B Objects have fallen on or liquid has been spilled into the appliance or C The appliance has been exposed to rain or D The appliance does not appear to operate normally or exhibits a marked change in performance or E The appliance has been dropped or the enclosure damaged 16 SERVICING The user should not attempt to service the appliance If parts are replaced during service be sure the parts meet factory specification Inappropriate substitution can result in fire or a risk of electric shock Upon completion of service ask the technician to perform safety checks on the product For service and warranty information CAUTION TO PREVENT ELECTRIC SHOCK DO NOT USE THIS POLARIZED PLUG WITH AN EXTENSION CORD RECEPTACLE OR OTHER OUTLET UNLESS THE BLADES CAN BE FULLY INSERTED TO PREVENT BLADE EXPOSURE 8
7. over Notes about the remote control 1 If you find that the remote control can not be used at a normal distance to the main unit then the battery could be weak so you need to replace the battery with a new one 2 Remove the battery if the remote control is not used for an extended period of time 3 If battery leak remove it immediately and properly dispose it Avoid touching the leaked material and splashing it to clothing etc Clean the battery compartment thoroughly before installing new battery Trouble shooting Problem Possible Reasons solutions Can t get through power supply Display can t be turned on The plug is not inserted properly the socket has no power the fuse is broken POWER button has not been pressed No sound at all Incorrect selection of input signal The wire and lead are not connected correctly f mute state is turned on Sound source machine is not powered Neither of the main channels have sound The speaker line is not connected properly The signal plug is connected wrongly or lines are short circuited Can t operate or display normally e Be affected by exterior strong disturbance turn off first and then turn on again Avoid direct sunlight heat CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN CAUTION DO NOTREMOVE BACK OR COVER OF UNIT DUE TO THE POSSIBILITY OF ELECTRICAL SHOCK THERE ARE NO USER SER
8. ress the OK Select key to reset the figures of minutes after that press OK Select key again the time on the screen will flicker continuously for 6 times to show the success of time setup e When you want to set Alarm you can first enter Alarm interface then take the method of resetting the time for reference After the setting of Alarm press the Alarm on off key to make the alarm on e How to play iPod a Insert iPod into the socket of iPod b Press the iPod c In the middle of remote control are specially designed for iPod player iPod control area M gt Can control the play and pause function of the iPod player C EP Press and hold 2 seconds you can control iPod player fastforward and fastreverse E EP Can control iPod player to play the previous or the next song EZ Can control the previous catalogue of the iPod player E Can control the next catalogue of the iPod player E Mens Can control the iPod player to return to the previous submenu O j Can control the iPod player to enter to the next submenu Can control the iPod player to play repeatedly Alp Can control the iPod player to play randomly e How to play FM tuner a b C Press FM tuner for radio mode LCD will show 87 50mHZ Tuner controls the increase and decrease of the FM frequency 1 10 number keys separately belong to 10 channels extract or
9. ubwoofer 50Hz 280Hz L R channel 3 5 inch x 2 dome tweeter Subwoofer 8 inch 3 Drive unit 4 S N 85dB 5 THD 0 196 6 Size DxWxH 460mm x 150mm x 1000mm sek LCD Display System Ao mo A SS IW ES CAI nn 3 4 Default main interface 1 Input control area 4 iPod control area 2 Volume control area 5 System control area 3 Tuner control area 6 Time and Alarm control area Es TRE ES FU First level subpage ons E e Phd ELS AUTO SHUFFLE IPOD ON OFF ALARM ES memos We J gt i Jn Aoworr Second level subpage Third level subpage Operation instructions e How to open the system When the POWER in the back panel is on the system will have 5 seconds of self checking You can press key on the remote control or touch the key on the front panel to start this system e How to play stereo audio Press iPod AUX TUNER input mode on the remote control 1 Operations of the remote control a Alarm on off control the on off of alarm b Press Select key on the remote control you can select the following three submenu lt time volume alarm c Press OK Select you can enter into the next submenu in which the volume includes three group volume adjusters treb gt lt bass sw gt d When you want to reset time you can first enter time interface press Y A to reset the figures of hours then p
10. ust the figures of hour or minute After adjustment touch OK menu again the clock icon on the LCD will flicker continuously for 6 times to show the success of time setup When setup alarm choose alarm option on the second level subpage the operation is similar to the clock setup After finish the alarm setup touch OK menu and hold for 2 seconds to return the third level subpage for the on off option of alarm e How to play FM tuner by touch key control system When the cursor points to the tuner control area touch OK menu key to enter ADJUST option you can change the needed option through V A key then touch the OK menu key to enter ADJUST status then touch to up or to down and the tuner will search manually choose and enter AUTO status and then touch V Ato up or down once to up the FM frequency will decrease otherwise opposite the tuner will search automatically If you want to save the program just enter the MEMORY status then Press V A to choose the channel you want to save At last press the OK menu once again Installing battery in the remote control Since the remote control will be used for many units to control operations you should begin by installing the supplied battery 1 Turn the remote control over and pull out the battery compartment cover 2 Insert the battery according to the battery compartment 3 Close the battery compartment c
Download Pdf Manuals
Related Search