Home

Pioneer XDJ-AERO User's Manual

1. Records the input sound at the point the ROLL button is pressed and repeatedly ROLL outputs the recorded sound according to the beat mul tiple set with the BEAT control Sets the balance between the original sound and the roll sound Varying the effect Turn the LEVEL DEPTH control The effect changes according to the direction in which the LEVEL DEPTH control is turned and its position SUOI IUN pue SaWeU Yed Basic Operation Preparations must be made using the procedure shown on the diagram below in order to make DJ performances using a wireless LAN 3 Connecting by wireless LAN page 11 4 Loading tracks Installing rekordbox i0S Android Download the rekordbox iOS Android application using a mobile device or computer then install it on the mobile device rekordbox iOS Android can be used on your mobile device e The rekordbox OS Android application can be downloaded from the App Store or Google Play Importing tracks In order to play tracks music files on a mobile device or computer on this unit the tracks must first be analyzed then added to the rekordbox library e The following describes the procedure for importing tracks into rekordbox on a mobile device For the procedure for importing tracks into rekordbox on a computer see the Operating Instructions for rekordbox Mac Windows 1 At the rekordbox iOS Android top menu tap the impor
2. Mixing using the faders Prepare the unit in advance so that the sound of CH 1 is being output from the speakers For instructions on preparation see Outputting sound on page 23 For instructions on monitoring the sound see Monitoring sound with headphones on page 20 Mixing using the channel faders 1 Set CROSS F CURVE THRU 7X 7X the crossfader curve selection switch to THRU 2 Switch the DECK2 PHONO2 LINE2 selector switch in the CH 2 section 3 Turn the CH 2 TRIM control clockwise 4 Press the 12 CH2 button The sound of CH 2 is monitored from the headphones 5 Turn the HEADPHONES MIXING control This adjusts the balance of the monitor volume between the sound output from the MASTER OUT 1 and MASTER OUT 2 terminals the sound of CH 1 and the sound of CH 2 6 Operate DECK2 While checking the sound over the headphones adjust the tempo of CH 2 track to match the tempo of CH 1 track 7 While moving the CH 2 channel fader to the back move the CH 1 channel fader to the front While checking the sound output from the speakers operate the chan nel faders to substitute the sound of CH 1 with the sound of CH 2 Mixing is completed once only the CH 2 sound is being output from the speakers Mixing using the crossfader 1 Set CROSS F CURVE THRU 7X 7X the crossfader curve selector switch to 7A or 7X 2 Operate CH 2 Operate as described in steps 2 to 6
3. Music files used for Du play can be managed The management informa tion can be transferred using USB devices page 7 Driver software When operating DJ software on the computer using this unit the sound of the music file that is playing can be output from this unit page 8 Software end user license agreement This Software End User License Agreement Agreement is between you both the individual installing the Program and any single legal entity for which the individual is acting You or Your and PIONEER CORPORATION Pioneer TAKING ANY STEP TO SET UP OR INSTALL THE PROGRAM MEANS THAT YOU ACCEPT ALL OF THE TERMS OF THIS LICENSE AGREEMENT PERMISSION TO DOWNLOAD AND OR USE THE PROGRAM IS EXPRESSLY CONDITIONED ON YOUR FOLLOWING THESE TERMS WRITTEN OR ELECTRONIC APPROVAL IS NOT REQUIRED TO MAKE THIS AGREEMENT VALID AND ENFORCEABLE IF YOU DO NOT AGREE TO ALL OF THE TERMS OF THIS AGREEMENT YOU ARE NOT AUTHORIZED TO USE THE PROGRAM AND MUST STOP INSTALLING IT OR UNINSTALL IT AS APPLICABLE 1 Definitions Documentation means written documentation specifications and help content made generally available by Pioneer to aid in installing and using the Program Program means all or any part of Pioneer s software licensed to You by Pioneer under this Agreement 2 Program license Limited License Subject to this Agreement s restrictions Pioneer grants to You a limited non exclusive nontr
4. No Support Pioneer has no obligation to provide support maintenance upgrades modifications or new releases for the Program or Documentation under this Agreement 3 Warranty disclaimer THE PROGRAM AND DOCUMENTATION ARE PROVIDED AS IS WITHOUT ANY REPRESENTATIONS OR WARRANTIES AND YOU AGREE TO USE THEM AT YOUR SOLE RISK TO THE FULLEST EXTENT PERMISSIBLE BY LAW PIONEER EXPRESSLY DISCLAIMS ALL WARRANTIES OF ANY KIND WITH RESPECT TO THE PROGRAM AND DOCUMENTATION WHETHER EXPRESS IMPLIED STATUTORY OR ARISING OUT OF COURSE OF PERFORMANCE COURSE OF DEALING OR USAGE OF TRADE INCLUDING ANY WARRANTIES OF MERCHANTABILITY FITNESS FOR A PARTICULAR PURPOSE SATISFACTORY QUALITY ACCURACY TITLE OR NON INFRINGEMENT 4 Damages and remedies for breach You agree that any breach of this Agreement s restrictions would cause Pioneer irreparable harm for which money damages alone would be inadequate In addition to damages and any other remedies to which Pioneer may be entitled You agree that Pioneer may seek injunctive relief to prevent the actual threatened or continued breach of this Agreement 5 Termination Pioneer may terminate this Agreement at any time upon Your breach of any provision If this Agreement is terminated You will stop using the Program permanently delete it from the computer where it resides and destroy all copies of the Program and Documentation in Your posses sion confirming to Pioneer in writing that You h
5. 1 Connect the USB device to the USB device insertion slot 2 Press the lt gt USB button The tracks on the USB device are displayed on the main unit display 3 Turn the rotary selector Select the track e To move to lower layers in a folder select the folder then press the rotary selector e To return to a higher level press the BACK TOP button e When the BACK TOP button is pressed for over 1 second the screen moves back to the layer above 4 Press the rotary selector The track is loaded and playback begins Disconnecting USB devices Always perform the following procedure to disconnect USB devices Pulling the USB device out without performing this procedure could make the USB device unreadable When turning this unit s power off be sure to remove the USB device first 1 Press the USB STOP button for over 2 seconds The USB indicator turns off 2 Disconnect the USB device Outputting sound Before outputting sound check that this unit and the surrounding devices are properly connected For instructions on connecting see Connecting the input output terminals on page 10 or Connecting by wire less LAN on page 11 Set the volume of the power amplifiers connected to the MASTER OUT 1 and MASTER OUT 2 terminals to an appropriate level Note that very loud sounds will be output if the volume is set too high When playing tracks via wireless LAN playback may become impos sible due to deter
6. Stereo mini phone jack 3 5 MM cccccesicteeeserrceansdarmaenteaatiansgcesers 1 set PHONO LINE input terminals RCA DIN JACK ienen E 2 sets MIC input terminal Phone jacki 0 3 MM ecesnccrneeiaswecgnecrbeeeseredeiennsnnet thie sermeusceiasi Gees 1 set The specifications and design of this product are subject to change without notice e 2012 PIONEER CORPORATION All rights reserved PIONEER CORPORATION 1 1 Shin ogura Saiwai ku Kawasaki shi Kanagawa 212 0031 Japan lt DRI1063 A gt UOHPUWOJU euo ppy
7. selector switches set to the proper positions No sound or small sound Are the TRIM control channel faders crossfader and MASTER LEVEL control set to the proper positions Is the LINE PHONO selector switch on this unit s rear panel properly set Is the MASTER LEVEL control set to the proper position Distorted sound Is the TRIM control set to the proper position Is the LINE PHONO selector switch on this unit s rear panel properly set Is the sound level input to the MIC terminal set to an appropriate level No sound is produced or sound is Is this unit placed near a TV distorted or noisy Are the MIC ATT and MIC LEVEL controls set to the proper positions Microphone sound is not output or volume is low Sound is distorted when an analog player is connected to this unit s PHONO LINE terminals Or lighting of the channel level indicator does not change even when the TRIM control is turned in phono equalizer Is an audio interface for computers connected between the analog player and this unit Display Check The playing address display is not displayed in the remaining time mode Problem The category is not displayed Is the rekordbox Mac Windows library informa tion stored on the USB device Is the USB device write protected Caching meter is not displayed Are you playing a track from a USB device Is a t
8. w foa oc e a o fa fof on a e a ja poa bea fe m Jou os ros fo To ff 0 lit 127 Difference count value from when previously operated e Turn clockwise 1 max 30 e Turn counterclockwise 127 min 98 Difference count value from when previously operated Turn clockwise 1 max 30 Turn counterclockwise 127 min 98 Difference count value from when previously operated urn clockwise 1 max 30 Turn counterclockwise 127 min 98 Difference count value from when previously operated Turn clockwise 1 max 30 Turn counterclockwise 127 min 98 OFF 0 ON 127 0 16383 When turned fully counterclockwise 0 When ned fully clockwise 16383 16383 en turned fully counterclockwise 0 When ned fully clockwise 16383 6383 en turned fully counterclockwise 0 When ned fully clockwise 16383 ned fully counterclockwise 0 When ly clockwise 16383 Remarks dd values Off 0 Er fo fo fa fe e pe aona o C E lit 127 e p pe pe oron mesa foe nn Jes Joe Joo Jor ore ete er pee f n a j fo f ee Off 0 lit 127 t 127 Off 0 lit 127 Off 0 lit 127 3 Mixer MIDI message this unit to computer Remarks dd values When SHIFT button is off When SHIFT button is on 0 16383 Deck A a a a When turned fully counterclockwise 0 When turned
9. A EEEE E 15 Faye SoC N Merrett tte rer rete tetera ter wre errr ranr tn treet ectrer tt 16 Browse SSC TION 2 ecieasircnviinc ou toceeticeanucnacasiinseocaatucasatase ston atanestessaaddastdoestadestavexs 18 DVIS FSSC TION artsen stirna a a sac a o 20 EtteCtSeGtiOMineriugriieriari ina EEE E ENON E ine 21 05 Basic Operation Installing rekordbox IOS Android siscsssivessxcosaivyvanesnsiavenersana tester taasebuses 22 PEUBGHTVCAACK Ss windscnasiciandoavscsvdvuneroesidonvevacdaisaineaed oisunniectotuadriutesedunntdtestouens 22 Loading traCkKS eerdre tav aia EEEE DE E ET EEEE SEERE 22 CT UNG SOUNA 5 econo use lc Cake E eo lea E al E s 23 Mixing using the TAC SYS acer vssaursinnaneersieadeaseelerssanies oumuisiecatancamnncmen asianstomwadenrs 24 Disconnecting MAIS Seacynassincsasersniinsdicouniaiadesuenorsbiasynieisbiaaroietenavernetneioanen 24 advanced Operation Using TS AO TUK MOI CMON vsscteieiiceddssutosaudensatastbauinidveouucriulaicukennrds 25 Using the sample launch TUN C UGH cseusesclncdcaucehantcavectascahioussiiteinarcitoebiores 20 Using the jog drum FUNCTION cceeccccscccccecsssssstsetsssestsestisstssiestieees 25 Using the QUANTIZE PUNCTON sarantan n ea 25 Using th SYNG DUCTION sairaista notave an a a 26 Using the DJ SO WArE ox hecerest nvcchnrenvebcastie vee ernesmelowanetieaxsuadmondomnesion 26 About the playback history HISTORY s sssssresresirrrrrerirrrrrrrrrrrerrirrerrn 26 Changing the settings About the auto standby TUNCT
10. Please read and understand the Software End User License Agreement before installing or using this software Use of this software constitutes agreement to the terms of the Software End User License Agreement 7 XDJ AERO Operating Instructions rekordbox Read Before Use PDF file rekordbox Install Music Management Software version 1 6 0 Install Driver Software XDJ AERO_ 1 000 Adobe Reader is required to view PDF files If you do not have Adobe Reader please click the button al left to download Fang ADOGE READER Adobe the Adobe logo and Reader are elfer registered trademarks or trademarks of Adobe Systems incorporated in the United States and or other countries e Toclose the CD ROM menu click Exit 3 Install rekordbox Mac Windows following the instructions on the screen e s noA alojag En 7 For Windows 7 Windows Vista and Windows XP Read Cautions on installing the software carefully before installing rekordbox Mac Windows e Authorization of the computer s administrator is required to install and uninstall rekordbox Mac Windows Log on as the user registered as the computer s administrator before installing rekordbox Mac Windows 1 Insert the included CD ROM into the computer s CD drive The CD ROM menu is displayed e ifthe CD ROM menu does not appear when the CD ROM is inserted open the CD drive from Computer or My Computer in the Start menu then doub
11. a suitable level for the connected devices Turn the TV s power off or install this unit and TV away from each other Set the MIC ATT and MIC LEVEL controls to the proper positions For analog players with built in phono equalizers use with the LINE PHONO selector switch on this unit s rear panel switched to LINE page 10 lf the analog player with built in phono equalizer has a PHONO LINE selector switch switch it to PHONO he output of the audio interface for computers is line level use with the LINE PHONO selector switch on this unit s rear panel switched to LINE page 10 If he analog player has a PHONO LINE selector switch switch it to PHONO Remedy When playing files recorded in VBR it may happen that the set cannot detect the length of the track immediately and that some time is required for the playing address display to appear Use a device onto which the library information has been exported from rekord box Mac Windows Cancel the USB device s write protection so that this unit can write on it The caching meter is not displayed when playing tracks from USB devices The caching meter is not displayed when tracks over 10 minutes in length are loaded This unit is shipped with the auto standby function turned on If you do not want to use the auto standby function set AUTO STANDBY to OFF page 27 Functions and operations Problem Check Can
12. e See your device s operating instructions for instructions on search ing for or displaying connectable SSID s 12 En 7 On the mobile device or computer select the SSID checked in step 3 8 Input the password you made a note of in step 5 Setting the wireless LAN connections in the WLAN client mode If the access point to which you want to connect supports the WPS standard make the connection settings using the WPS button the WPS PIN code or manually If the access point to which you want to connect does not support the WPS standard make the connection settings manually e Before starting turn on this unit s power e fconnections cannot be established approximately 2 minutes after the connection settings operations below are performed the WPS indicator turns off e Previously connected devices are connected automatically with priority without making the settings Connecting using the WPS button Press the access point s WPS button e See your device s operating instructions for instructions on connect ing using the WPS button 2 Press this unit s WPS button for over 1 second The WPS indicator flashes Once the setting is completed the WPS indicator turns on Connecting by inputting this unit s WPS PIN code 1 Press the INFO UTILITY button for over 1 second 2 Turn the rotary selector select WLAN SETTING then press the rotary selector 3 Turn the rotary selector select Show P
13. second The WPS indicator flashes Once the setting is completed the WPS indicator turns off Connecting by inputting the WPS PIN code 1 Check the PIN code in the WPS connection function on the mobile device or computer e See your device s operating instructions for instructions on checking the WPS PIN code 2 Press the INFO UTILITY button for over 1 second 3 Turn the rotary selector select WLAN SETTING then press the rotary selector 4 Turn the rotary selector select INPUT WPS PINCODE then press the rotary selector 5 Use the rotary selector to input the mobile device s or computer s PIN code Once the setting is completed the WPS indicator turns off Connecting by manual input 1 Press the INFO UTILITY button for over 1 second 2 Turn the rotary selector select WLAN INFORMATION then press the rotary selector 3 Turn the rotary selector select SSID then press the rotary selector Make a note of the SSID for future reference e The first 11 characters of the SSID are displayed Turn the rotary selector to display the portion that is not initially displayed 4 Press the BACK TOP button Press to return to the previous screen 5 Turn the rotary selector select PASSWORD then press the rotary selector Make a note of the PASSWORD for future reference 6 From the wireless LAN connection settings on the mobile device or computer display the connectable SSID s
14. section with the auto cue function can be selected from eight levels e The auto cue level setting remains in the memory even when the power is turned off 1 Press the INFO UTILITY button for over 1 second The UTILITY screen is displayed 2 Turn the rotary selector then press it Select A CUE LEVEL 3 Turn the rotary selector then press it The auto cue level setting changes SUOI IUN pue s weLu Yed Mixer section PHONO2 PHONO1 DECK1 LINE1 DECK2 LINE2 Sood o o i HEADPHONES Shits MIC KENG E E LEVEL D g J CUE MASTER i i 0 0 2 E 4 a 65 5 4 j b E OEE E 0 LOW HI CH1 CH2 ON OFF Ei iQ o BEQS Y ji gt N G RF E Pl ON oo CROSS F CURVE On 0005 THRU x 7X O KH NO DECK1 PHONO1 LINE1 selector switch This selects the CH 1 input source from among the devices con nected to this unit e When set to PHONO LINE the mixer section can be used as a DJ mixer In this case the effect sections of the respective decks can be used EQ HI MID LOW controls These adjust the sound quality of the respective channels These adjust the HI high range MID middle range and LOW low range respectively TRIM control Adjusts the level of audio signals input in each channel LEVEL indicator This displays the audio levels of the respective channels e Press the MASTER button to switch the
15. t crossfade Is the CROSS F CURVE THRU 7X 7 cross fader curve selector switch set to THRU Back cue function does not work Is a cue point set No effect Is one of the FX SELECT buttons TRANS FLANGER ECHO or ROLL pressed ls the LEVEL DEPTH control set to the center position ls the BEAT control set to the proper position SYNC function does not work Has the music file been analyzed SYNC function does not work even Is the beat grid irregular when files are analyzed Is the beat grid properly tapped Are the BPMs of the tracks in the two decks too different Are you scratching Recording is not possible Is the external device or microphone properly connected Is the channel you want to record properly sele Auto mixing is not possible Isa Are cted track on a playlist selected there at least two playable tracks on the playlist Are the DECK1 PHONO1 LINE1 and DECK2 PHONO2 LINE2 selector switches set to the proper positions Settings are not stored inthe memory Has the power been turned off directly after changing the setting USB devices Problem Check USB device is not recognized Is the USB device properly connected Is th Is th e USB device connected via a USB hub e USB device supported by this unit Is th Are e file format supported by this unit you using a USB device such as a bus power driven hard disk whose
16. the top of this unit to adjust the microphone s volume MIC jack Connects a microphone here PHONES jacks Connect headphones here Both stereo phone plugs 6 3 mm and stereo mini phone plugs 3 5 mm can be used e There are two input jacks both a stereo phones jack and a mini phones jack but do not use both simultaneously If both are used simultaneously when one is disconnected and or connected the volume of the other may increase or decrease suddenly Connecting by wireless LAN On this unit wireless LAN connections can be used to connect to mobile devices or computers Supporting wireless LAN connections and hold DJ performances using music files on the mobile devices or computers To make DJ performances using a wireless LAN the LINK EXPORT function must be used after making the wireless LAN connection then establishing the link For instructions on establishing the link see the User s Manual for rekordbox iOS Android or the Operating Instructions for rekordbox Mac Windows About the wireless LAN function s operation mode On this unit the wireless LAN function s operation mode can be switched according to the usage purpose There are two operation modes for the wireless LAN function as described below Access point AP mode In this case this unit is the main unit on the LAN network Data is exchanged directly with the mobile devices or computers through wire less connections re
17. which the CD ROM can be read Audio output to speakers headphones etc internal or external Sound i audio device ternet For user registration and inquiries use a web browser support ing 128 bit SSL Safari 2 0 or greater Internet Explorer 6 0 or connection greater etc USB port A USB port for connection of a USB device flash memory hard disc etc is required to transfer music files to the USB device e Full functionality is not guaranteed on all computers even those meeting the operating environment requirements described above e Even with the required memory capacity indicated for the operating environment above in the cases described below the software may not provide full function ality and performance due to lack of memory In this case take the necessary measures to ensure Sufficient free memory We recommend adding extra memory in order to achieve stable performance When there are many tracks being managed in the rekordbox Mac Windows library When resident programs and services are running e Depending on the computer s power settings and other factors the CPU and hard disk processing capacity may be insufficient When using laptop comput ers in particular always keep the AC power connected and adjust the comput er s settings to maximize performance when using rekordbox Mac Windows e Note that problems may arise with the functionality of rekordbox Mac Windows depending on other software runni
18. 383 urned fully counterclockwise 0 When OFF 0 O fully clockwise 16383 fAuTOMxbution de Je ja J J J oons S Indicator name MIDI message computer to this unit Remarks dd values w gt CH LEVER METER Dec D D fin gt J ec ec ec J s HEADPHONE CUE A Dec 1 i al aimee AUTO MIX button ss sidY MIX button When SHIFT button is off When SHIFT button is on Oto Er A NC RR E os as 8 Q 27 Alloff 0 allon 127 Additional information Troubleshooting e Incorrect operation is often mistaken for trouble or malfunction If you think that there is something wrong with this component check the points below Sometimes the trouble may lie in another component Inspect the other components and electrical appliances being used If the trouble cannot be rectified after checking the items below ask your nearest Pioneer authorized service center or your dealer to carry out repair work power off waiting 1 minute then turning the power back on Power supply Problem Check Is the power cord properly connected ls the STANDBY ON switch for power supply set to ON The STANDBY ON indicator flashes and the power does not turn on The power is not turned on None of the indicators light Audio output Problem Check Are the DECK1 PHONO1 LINE1 and DECK2 PHONO2 LINE2
19. AT LOOP LED SAMPLE LAUNCH MASTER TEMPO SYNC MASTER LED UJ 3 M Jog dial when top section turned N a 5 5 a 5 J Jog dial illumination 9n s ess WN IAIN 40 S 7 2 Effects SW Name MIDI message this unit to computer Remarks dd values Dec kA Deck B BEAT control Deck C Deck D Dec FX SELECT button Dec Dec Dec FX SELECT button Dec FLANGER Det Dec Dec FX SELECT button Dec ECHO Dec Dec Dec Dec FX SELECT button ROLL Dec Dec Dec gJ Da PITDINIAIPI DINIM PIOVIN WI gt yD Deck B LEVEL DEPTH Deck C Deck D Indicator nam FX SELECT TRANS FX SELECT FLANGER e e O IJ U cmos JOJA FX SELECT ECHO FX SELECT ROLL e w gt iii w gt wl gt piogola o 9 When SHIFT button is off When SHIFT button is on W K emp QO QO B4 16 gJ O ooo O 0 10 oO o 0 Ww oal rPRKI oR Ial AIAJ AIAI AIAJ A Iaia Io on K on i EN O i O M B4 2 MSB B4 8 B4 34 LSB B4 50 B5 2 MSB B5 18 B5 34 LSB B5 50 B4 0 MSB B4 26 B4 42 LSB B4 58 B5 0 MSB B5 26 B5 42 LSB B5 58 MIDI message computer to this unit dd MSB LSB MSB LSB MSB LSB MSB LSB When SHIFT button is off When SHIFT button is on a q a w fa o a w fa nF t 127 a e a a
20. C CONTROL USB gt MIC List of icons displayed on the main unit display section LA Genre Fry Playback is not possible ih Artist Ca Playing Album Played Track file name 1 Folder ceed Remixer Rating E 3 Original artist o Time try rekordbox Beat Sound File Music USB rekordbox e ca Effect Color FX ROLL Filter ca ca PC DECKA Beat Sound r Trim Effect Color FX ROLL Filter aed aed L MASTER OUT Beat Effect Beat Effect MASTER HEAD PHONES PHONES OUT LEVEL PC PHONES About trademarks and registered trademarks e Pioneer and rekordbox are trademarks or registered trademarks of the PIONEER CORPORATION e Microsoft Windows Vista Windows and Internet Explorer are either registered trademarks or trademarks of Microsoft Corporation in the United States and or other countries e Apple Macintosh Mac OS Safari iTunes and Finder are registered trademarks of Apple Inc in the United States and other countries e Android and Google Play are trademarks of Google Inc e Intel and Pentium are trademarks of Intel Corporation in the U S and other countries e ASIO is atrademark of Steinberg Media Technologies GmbH The names of companies and products mentioned herein are the trade marks of their respective owners This product has been licensed for nonprofit use This product has not been licensed for commercial purposes for profit ma
21. INCODE then press the rotary selector This unit s PIN code is displayed Make a note of the PIN code 4 Press the rotary selector The WPS indicator turns on 5 With access point WPS connection settings input the PIN code displayed in step 3 Once the setting is completed the WPS indicator turns on e See your device s operating instructions for instructions on inputting the PIN code Connecting by manual input 1 Press the INFO UTILITY button for over 1 second 2 Check the access point s SSID and password e See your device s operating instructions for instructions on checking the SSID and password 3 Turn the rotary selector select WLAN SETTING then press the rotary selector 4 Turn the rotary selector select SELECT SSID then press the rotary selector Up to 10 access points in the area are displayed 5 Turn the rotary selector select the SSID checked in step 2 then press the rotary selector e fthe corresponding device s SSID is not displayed on the list of access points in the area or to specify an SSID that is intentionally not displayed through use of a stealth function etc the device can be specified by selecting OTHER then inputting the SSID security encryption type password 6 Use the rotary selector to input the PASSWORD Once the setting is completed the WPS indicator turns on Checking the current wireless LAN settings 1 Press the INFO UTILITY bu
22. ION seviiseuccstsatswsortecereannekinnbcepestallouiitieineapuiced 27 Setting Pretere Sirisa ieaiaia aar aa aE AAAA AAAI 27 List of WLAN INFORMATION iteMS ssssesierrrrrireririrrirrrrrrirrrierrren 217 List of WLAN SETTING EMS s1icooci couezsennscdnetesiobichonbalenthiotindi e A 28 08 List of MIDI Messages MEE A E A E A E A A E 29 2 ENEC Sn A E dancdeanu ered ceaautiaedes 30 NS serere ienne ninde irain ii eaea eminence EEA EENE DESE 31 Additional information Troubles HOOUINIO iiciwistiwisaseioveniiaeticctettianie luge nmanieeetdertnnrd nwa ave aussie 33 GI FMS Sao S e E E E E EE 35 Block Diagr MN sersarerarininerarinarienr veer a A ENNERT 36 List of icons displayed on the main unit display SECTION 36 About trademarks and registered trademarks erriren 36 Cautions GC Oy TCI INS erea a a A a 36 Using the online support S te ss ssssssrssrrernrsnrinnrrnrrnritnrirrirerrrnrrrrrrirrrrrrns 37 SPECICATION Sirenia orn eat coke eda dno comin doers E oe T S 37 2 En Before start Features This unit is a DJ system integrating a DJ player and DJ mixer in a single unit and carrying over the high operability of Pioneer s DJ products the world standard for club equipment Full fledged DJ performances can be made easily using tracks not only on USB devices and computers but also on mobile devices smartphones tablets etc MULTI MEDIA MULTI FORMAT In addition to music files stored on flash memory or other USB devices m
23. Pioneer DJ SYSTEM XDJ AERO http pioneerdj com support The Pioneer website shown above offers FAQs information on software and various other types of information and services to allow you to use your product in greater comfort http rekordbox com For inquiries on rekordbox please see the online support site indicated above Operating Instructions Contents How to read this manual In this manual names of channels and buttons indicated on the prod uct names of menus in the software etc are indicated within square brackets e g MASTER channel ON OFF File menu Before start EAI CS Sirain in eg E RE REEE TE E EEEE 3 Waar SIA Ae DOK ia A 4 Before you start Playable USB COVICES ccccccccccecsscsccsstsssescsestestsstssstsssrsssssesseseess 5 Playable music file POrmMats cntsrocsssnstonnenssendseuticsutans ebesauaati eesisenensensetiatadesnss 5 Functions usable in combination with a COMpUtEr sesser 6 About the rekordbox Mac Windows music management software 7 Installing the driver SOTWAlE civeciasrscveavavcvessctticaninsdestuessniceitaveudinevavveersvenis 8 Connections Connecting the input output terminalS s sssssresrrirrrrrrrrrrrrerrrrrrrrnen 10 Connecting by wireless LAN i vccveciastacdaxasancalainnsasnupantensnd veniam dmmptonenttins 11 D Part names and functions Power amp wireless SECON wceannemerewimecerntintenae de aeaantnaamiatiinn 15 USB device SeCtiO Numini a aa
24. SK Setting upon purchase Not displayed in the WLAN client mode N Items marked are not displayed in the access point AP mode Setting ranges OFF ACCESS POINT AP WLAN CLIENT 0 to 9 max 8 characters A to Z ato z 0 to 9 symbols max 32 characters OPEN WPA WPA2 A to Z a to z 0 to 9 symbols max 64 characters CH1 AUTO ENABLE DISABLE 20 MHz 40 MHz Ominute to 60minute to 1440minute YES NO Method of selection input method ENABLE DISABLE 000 000 000 000 to 255 255 255 255 Set to 192 168 1 1 255 255 255 0 upon purchase Description Used to set this unit s operation mode When in the access point mode input the PIN code of the sub unit to be connected to this unit here to authorize connection Used to set this unit s SSID Used to set this unit s security encryption type Used to set this unit s password Sets this unit s IP address Sets this unit s subnet mask This unit uses the 2 4 GHz band If there is a wireless LAN network on the same band in the area and the waves cause interference making connections and communications instable try changing the channel manually By default this is set to AUTO anda relatively free channel is selected automatically Used to set whether or not to enable this unit s DHCP server function ENABLE Enables the DHCP server function DISABLE Disables the DHCP ser
25. TER OUT 2 terminals the sound of the master channel When turned clockwise The volume of the sound output from the MASTER OUT 1 and MASTER OUT 2 terminals the sound of the master channel becomes relatively louder 4 Turn the HEADPHONES LEVEL control Sound is output from the headphones e When the Q CH1 button or 0 CH2 button is pressed again monitoring is canceled e Monitoring of the sound output from the MASTER OUT 1 and MASTER OUT 2 terminals the sound of the master channel can not be canceled Using a microphone 1 Press the MIC ON OFF button 2 Turn the MIC LEVEL control clockwise The sound of the microphone is output from the speakers e Adjust the MIC ATT control on the rear panel as necessary page 10 Adjusting the sound quality Turn the MIC EQ control When turned fully clockwise the attenuation of the bass sound is maximum When turned fully counterclockwise the attenuation of the treble sound is maximum Using the filter function The sound of the high or low range is filtered out greatly changing the tone Turn the FILTER control Right An effect as if the low range was gradually cut is achieved Left An effect as if the high range was gradually cut is achieved Effect section BEAT TRANS FLANGER GHE C fF ER a Mm BEAT control This is used to select the beat multiple to wh
26. USB device s recording and playback functions are not in use That no computer is connected to the USB port type B port on this unit s rear panel while the A MIDI button is pressed 3 Press the rotary selector The changed settings are stored e o close the UTILITY screen press the INFO UTILITY button Setting preferences Options settings Selection items Descriptions Q WLAN INFORMATION For details see List of WLAN INFORMATION items on page 27 WLAN SETTING For details see List of WLAN SETTING items on page 28 gt LINK DISCONNECT Disconnected the link with rekordbox on the mobile device or computer eQ Ee 7 Sets the mode for operating DJ software gt MIZER MORE RE meRO ES For details see Using the DJ software on page 26 P D A CUE LEVEL 36 dB 42 dB 48 dB 54 dB 60 dB 66 dB 72 dB 78 dB Sets the auto cue level For instructions on setting see o Changing the auto cue level on page 19 5 sdi LANGUAGE E The language used for the XDJ AERO s display can be selected O here LCD CONTRAST 1 3 5 Sets the main unit display s contrast LCD COLOR BLUE MAGENTA RED WHITE Sets the main unit display s backlight LCD INVERSION NEGATIVE POSITIVE Inverts the main unit display s tone f Set the time until the standby mode is set AST S TANDBN aii i For details see About the auto standby function on page 27 LOAD LOCK ON OFF Sets whether or not new tracks can be loaded on a deck on which a tr
27. Windows is started up the operating instruc tions can be viewed from the rekordbox Mac Windows Help menu For Mac OS X Open the Application folder with Finder then double click rekordbox Mac Windows 1 x x app e The 1 x x indicates the rekordbox Mac Windows version For Windows 7 Windows Vista and Windows XP Click on the Windows Start menu button then All Programs gt Pioneer gt rekordbox Mac Windows 1 x x gt rekordbox Mac Windows 1 x x e The 1 x x indicates the rekordbox Mac Windows version Installing the driver software This driver software is designed exclusively for inputting and outputting sound from the computer To use this unit connected to a computer on which a Windows or Mac OS is installed first install this driver software on the computer Before installing the driver software e Read Cautions on installing the software on page 7 carefully e Turn off this unit s power switch then disconnect the USB cable connecting this unit and the computer e f any other programs are running on the computer quit them e To install or uninstall the driver software you need to be authorized by the administrator of your computer Log on as the administrator of your computer before proceeding with the installation e fyou connect this unit to your computer without installing the driver software first an error may occur on your computer depending on the system environme
28. ack is playing VERSION No Displays this unit s software version Setting upon purchase List of WLAN INFORMATION items When MODE at WLAN SETTING is set to OFF only MODE and MAC ADDRESS are displayed MODE Displays the operation mode of this unit s wireless LAN function SSID When in the access point mode displays this unit s SSID When in the WLAN client mode displays the SSID only when con nected to an access point SECURITY Displays the currently set security encryption type PASSWORD Displays the currently set password IP ADDRESS When in the access point mode 192 168 1 1 is displayed When in the WLAN client mode displays the acquired IP address SUBNET MASK When in the access point mode 255 255 255 0 is displayed When in the WLAN client mode displays the acquired subnet mask MAC ADDRESS Displays this unit s MAC address Not displayed in the WLAN client mode List of WLAN SETTING items When MODE at WLAN SETTING is set to OFF only MODE and RESET TO DEFAULT are displayed Setting item 2 Setting item 1 MODE INPUT WPS PINCODE SSID NETWORK SETTING SECURITY PASSWORD IP ADDRESS SUBNET MASK CHANNEL NO OTHERS DHCP SERVER CHANNEL WIDTH KEY RENEWAL INTERVAL RESET TO DEFAULT 2 SELECT SSID 2 DHCP CLIENT IP ADDRESS SUBNET MA
29. aded from a device connected by wireless LAN the amount of data loaded into this unit is displayed here When all the indicators on the caching meter are lit this indicates that one track s worth of data has been loaded into this unit e This is not displayed when tracks are loaded from a USB device or for tracks with long playing times MP3 files with lengths of approximately 10 minutes or greater etc Information display section Switching the browse display mode There are two types of browse display modes library browse and folder browse The display mode differs according to whether or not rekordbox Mac Windows library information is stored on the USB device When library information is stored on the USB device The informa tion is displayed in the library browse mode The music files are displayed in the categories album artist etc set with rekordbox Mac Windows The category types can be changed in the Preferences in rekordbox Mac Windows When no library information is stored on the USB device The infor mation is displayed in the folder browse mode The folders and tracks on the medium are displayed in a tree structure When the lt USB button is pressed the mode switches to the browse display mode Searching for tracks quickly using the library information When library information created using rekordbox Mac Windows is recorded on the USB device the library information can be used to qu
30. ansferable license without the right to sublicense a Toinstall a single copy of the Program on the hard disk drive of Your computer to use the Program only for Your personal purpose complying with this Agreement and the Documentation Authorized Use b Touse the Documentation in support of Your Authorized Use and c Tomake one copy of the Program solely for backup pur poses provided that all titles and trademark copyright and restricted rights notices are reproduced on the copy Restrictions You will not copy or use the Program or Documentation except as expressly permitted by this Agreement You will not transfer sublicense rent lease or lend the Program or use it for third party training commercial time sharing or service bureau use You will not Yourself or through any third party modify reverse engineer disassemble or decompile the Program except to the extent expressly permitted by applicable law and then only after You have notified Pioneer in writing of Your intended activities You will not use the Program on multiple processors without Pioneer s prior written consent Ownership Pioneer or its licensor retains all right title and interest in and to all patent copyright trademark trade secret and other intellectual property rights in the Program and Documentation and any derivative works thereof You do not acquire any other rights express or implied beyond the limited license set forth in this Agreement
31. ary selector Only items containing the character string you have input are displayed Switching the information display mode The bottom section of the display switches between the track name and beat display each time the INFO UTILITY button is pressed Using the beat display function This displays the beat and playback position of the currently playing as 120018 S SS J J J geVeesersrrsrsres c 3 16 REMAIN C3 OUAHT Beat display section Auto loop display section Effect display section When display of track name is selected in the information display mode the mode automatically switches to the beat display when one of the operations below is performed Scratch Auto beat loop setting Effect setting oS Setting auto cue When a track is loaded or the track search operation is performed the silent section at the beginning of the track is skipped and the cue point is automatically set at the point immediately before the sound starts Press the TIME AUTO CUE QUANTIZE button for over 1 second Auto cue is Set to on A CUE lights on the main unit display e When the TIME AUTO CUE QUANTIZE button is pressed again for over 1 second auto cue is Set to off e The auto cue level setting remains in the memory even when the power is turned off Changing the auto cue level The acoustic pressure level identified as a silent
32. ave done so Sections 2 2 2 3 2 4 3 4 5 and 6 will continue in effect after this Agreement s termination 6 General terms Limitation of Liability In no event will Pioneer or its subsidiaries be liable in connection with this Agreement or its subject matter under any theory of liability for any indirect incidental special consequential or punitive damages or damages for lost profits revenue business savings data use or cost of substitute pro curement even if advised of the possibility of such damages or if such damages are foreseeable In no event will Pioneer s liability for all damages exceed the amounts actually paid by You to Pioneer or its subsidiaries for the Program The parties acknowl edge that the liability limits and risk allocation in this Agreement are reflected in the Program price and are essential elements of the bargain between the parties without which Pioneer would not have provided the Program or entered into this Agreement The limitations or exclusions of warranties and liability contained in this Agreement do not affect or prejudice Your statutory rights as consumer and shall apply to You only to the extent such limita tions or exclusions are permitted under the laws of the jurisdic tion where You are located Severability and Waiver If any provision of this Agreement is held to be illegal invalid or otherwise unenforceable that provision will be enforced to the extent possible or if incapable o
33. ay Adjusting the playing speed without changing the pitch Master Tempo Press the MASTER TEMPO button The MASTER TEMPO indicator lights The pitch does not change even when the playing speed is changed with the TEMPO slider e The sound is digitally processed so the sound quality changes Setting Cue 1 During playback press the gt I PLAY PAUSE button Playback is paused 2 Press the CUE button The point at which the track is paused is set as the cue point The gt H PLAY PAUSE indicator flashes and the CUE indicator lights No sound is output at this time e When anew cue point is set the previously set cue point is canceled Adjusting the cue point position 1 Turn the jog dial while pausing at a cue point The gt H PLAY PAUSE and CUE indicators flash The cue point can be fine adjusted in units of 10 msec 2 Press the CUE button The position at which the button was pressed is set as the new cue point e When anew cue point is set the previously set cue point is canceled Returning to Cue Point Back Cue During playback press the CUE button The set immediately returns to the currently set cue point and pauses e When the gt H PLAY PAUSE button is pressed playback starts from the cue point Checking Cue Point Cue Point Sampler Keep pressing the CUE button after returning to the cue point Playback starts from the set cue point Play
34. back continues while the button is held in Setting the loop automatically based on the track s tempo Auto Beat Loop 1 During playback turn the AUTO BEAT LOOP control to set the length for loop playback in number of beats The main unit display switches to the beat display 2 Press the AUTO BEAT LOOP control to start loop playback The loop out point is set automatically according to the track s tempo BPM and loop playback starts e Loop playback cannot be performed properly if the BPM value is not displayed e When auto beat loop is set the cue point moves to the loop in point e When the AUTO BEAT LOOP control is pressed during loop play back loop playback is canceled Operating the jog dial e The top of the jog dial has an embedded switch Do not place objects on the jog dial or subject it to strong forces e Water or other liquids getting into the set will lead to malfunction amp Scratch 1 Press the JOG DRUM button The jog dial indicator lights blue Switch the jog dial to the VINYL mode 2 During playback press the top of the jog dial Playback stops 3 Spin the jog dial in the desired direction and at the desired speed The sound is played according to the direction and speed at which the jog dial is spun by spinning the top of the jog dial while pressing it 4 Release your hand from the top of the jog dial Normal playback resumes Pitch bend During playback spin the outer sec
35. can be exchanged directly USB EXPORT rekordbox Mac Windows music files and management data can be exchanged using a USB device SOUND CARD This unit is equipped with a dedicated interface for controlling other brands of DJ software and a MIDI interface It also has a built in sound card allowing simple connection to other devices BEAT DISPLAY The beat position corresponding to the track s BPM and the position of playback are shown on the main unit display Furthermore the number of beats in loops and beat effects are displayed allowing you to check the beat visually for scratch loop and effect performances eys alojag USB REC Sound played on this unit during DJ performances can easily be recorded on USB devices flash memory devices etc The recorded sound can also be played on this unit BEAT SYNC This function can be used to automatically synchronize the tempo BPM and beat positions on the left and right decks based on the tracks GRID information as analyzed with rekordbox Genuine beat mixing is possible easily without moving the TEMPO sliders JOG DRUM The jog dial s mode can be switched to produce sound when the jog dial is touched This function allows this unit to be used like a sampler Furthermore the sampled sound can be scratched by turning the jog dial at this time SAMPLE LAUNCH Sampled sound sources registered in this unit can be easily loaded onto the respective decks simply by p
36. channel whose audio level is displayed MASTER LEVEL control Adjusts the audio level output from the MASTER OUT 1 and MASTER OUT 2 terminals O MASTER button This switches the channel indicated on the LEVEL indicator When off The audio level input to CH 1 channel 1 and CH 2 channel 2 is displayed on the LEVEL indicator When lit The audio level output from the MASTER OUT 1 and MASTER OUT 2 terminals is displayed on the LEVEL indicator DECK2 PHONO2 LINE2 selector switch This selects the CH 2 input source from among the devices con nected to this unit e When set to PHONO LINE the mixer section can be used as a DJ mixer In this case the effect sections of the respective decks can be used Ei MIC LEVEL control Adjusts the audio level input to the MIC terminal 20 En e Use the MIC ATT control on this unit s rear panel to adjust the audio level before DJ performances Ey MIC EQ control This adjusts the microphone s sound quality MIC ON OFF button Turns the microphone on off FILTER control Turn clockwise to apply the high pass filter Turn counterclockwise to apply the low pass filter gt Using the filter function p 21 AUTO MIX button This turns the auto mix function on and off Channel fader Adjusts the level of audio signals output in each channel CROSS F CURVE THRU 7X 7X crossfader curve selector switch This switches the crossfader c
37. current is higher than this unit s rated current 500 mA Time is required to read USB devices Is there a large number of folders or files recorded flash memory drives and hard discs on the USB device Are devi files other than music files stored on the USB ce Playback does not start when a track Are the files playable is loaded from a USB device isih No sound is produced or the sound is Isth faint when playing a track recorded on posi a USB device Sound is distorted when playing a Is th track recorded on a USB device File cannot be played Is th Music files cannot be played Are e auto cue function activated e MASTER LEVEL control set to the proper Remedy Set the CROSS F CURVE THRU Z Z crossfader curve selector switch to a position other than THRU Page 23 Set a cue point page 16 Press one of the FX SELECT buttons TRANS FLANGER ECHO or ROLL page 21 Turn the LEVEL DEPTH control clockwise or counterclockwise page 21 Set the BEAT control to the proper position page 21 Analyze the file page 26 Set the beat grid properly page 26 The SYNC function will not work properly if the BPM of the track on the deck for which the SYNC button is pressed is outside the adjustable tempo range of the track on the deck for which the SYNC button is not pressed The SYNC function is disabled when scratching Check the connection of the external d
38. ding is not possible on devices formatted in MAC OS Extended Journaled SUOI OUN pue SaWeU Yed Player section AUTO BEAT LOOP SHIFT e 0 refkordbe x PLAY PAUSE ERE El AUTO BEAT LOOP control e Turm Set the length of the auto beat loop s loop in units of beats e Press Turns loop playback on and off JOG DRUM button Use this to turn the jog drum function on and off gt Using the jog drum function p 25 SAMPLE LAUNCH button Use this to load this unit s internal sampled sound sources gt Using the sample launch function p 25 Jog dial e Scratch When the jog dial is set to the VINYL mode and the jog dial is turned while pressing down on its top the sound is played in the direction and at the speed at which the jog dial is turned e Pitch bend The playing speed can be adjusted by turning the outer part of the jog dial during playback TEMPO RANGE button The TEMPO slider s range of variation switches each time this is pressed O MASTER TEMPO button Use this to turn the master tempo function on and off TEMPO slider Use this to adjust the track playing speed El SYNC button Synchronizes to the master deck s tempo gt Using the SYNC function p 26 El MASTER indicator This lights when the SYNC function is set to MASTER gt 11 PLAY PAUSE button Use this to play pause tracks CUE button e Press Sets a cue point or moves th
39. e auto mix function was turned on is switched to by cutting in When a track that is not included on the playlist is loaded and played after turning the auto mix function on repeat playback is set between one or two tracks The auto mix function cannot be used in the following cases When the DECK PHONO LINE selector switch on either of the decks is set to PHONO LINE When the sample launch function is being used on either of the decks When the PC control mode is being used on either of the decks Auto mixing playlists on USB devices 1 Press the AUTO MIX button The auto mix function turns on 2 Connect the USB device to the USB device insertion slot 3 Press the lt USB button Select the playlist to be auto mixed 4 5 Load the tracks on the playlist e When the AUTO MIX button is pressed again the auto mix func tion turns off Auto mixing rekordbox iOS Android or rekordbox Mac Windows playlists 1 Press the AUTO MIX button The auto mix function turns on 2 Load the tracks from the rekordbox iOS Android or rekordbox Mac Windows playlist For instructions on loading tracks from rekordbox iOS Android or rekordbox Mac Windows see Loading tracks from mobile devices or computers via wireless LAN on page 22 e When the AUTO MIX button is pressed again the auto mix func tion turns off Using the sample launch function This function can be used to load this uni
40. e copyright protected by DRM the music files damaged Adjust the MASTER LEVEL contro so that the master level indicator s orange indicator lights at the peak level before recording Page 23 Adjust the TRIM control so that the channel level indicator s orange indicator lights at the peak level before recording Page 23 Copyright protected files cannot be played Play music files that are not damaged DJ software Problem Check Remedy DJ software on a computer cannot be Is the driver software properly set Set the driver software properly Page 8 operated DJ software s sound is not properly Are the DJ software s output settings and this Check the Du software s settings then check this unit s settings on the output unit s MIXER MODE setting properly set UTILITY screen and set the proper signal path page 26 Sound of the Du software is not Are the connection cables properly connected Connect the connection cables properly page 10 output Is the included USB cable properly connected Connect the computer and this unit directly using the included USB cable USB hubs cannot be used page 10 Are terminals or plugs dirty Wipe any dirt off terminals and plugs before connecting Are the connected components and amplifiers Set the external input selection and volume on the components and amplifiers properly set properly Is this unit s MIXER MODE properly set Set this unit s MIXER MODE accordin
41. e cue point e SHIFT press The playing position moves to the beginning of the track SHIFT button When another button is pressed while pressing the SHIFT button a different function is called out Playback Press the gt II PLAY PAUSE button Pausing During playback press the gt Il PLAY PAUSE button e Playback resumes when gt H PLAY PAUSE button is pressed again e When the jog dial is turned while pausing the position can be moved in units of 10 msec Forward and reverse scanning Turn the jog dial while pressing the SHIFT button The track is fast forwarded fast reversed in the direction in which the jog dial is spun e When the SHIFT button is released this function is canceled e When you stop the jog dial from spinning normal playback resumes e The fast forward fast reverse speed can be adjusted according to the speed at which the jog dial is spun Adjusting the playing speed Tempo control Move the TEMPO slider forward or backward The playing speed increases when the slider is moved to the side towards you decreases when the slider is moved to the side away from you The rate at which the playing speed is changed is indicated on the main unit display Selecting the playing speed adjustment range Press the TEMPO RANGE button The playing speed adjustment range switches each time the button is pressed WIDE 16 10 6 lights on the main unit displ
42. e eds a AE E E E oases 94 dB PHONO e E rere ee ae trey ne ee eer 84 dB IRMA eer en Rn E ERIN SET RTE AISNE TEN E REN OE 79 dB Total harmonic distortion MASTER OUT 1 20 Hz 20 kHzBW WLAN USB cueire e E A 0 003 EINE e E E A E A 0 006 Standard input level Input impedance LINE ea canescens ma daceeasseeececacn aes 12 dBu 47 kO PHONO oi ee 52 dBu 47 kQ MIC ee OnE ee RE 52 dBu 12 kQ Standard output level Load impedance Output impedance MASTER OUT 1 6 dBu 10 kQ 1 kQ or lower MASTER OUT 2 2 dBu 10 kQ 1 KQ or lower PHONES Penne en eo ne Y 3 8 dBu 32 0 51 Q Rated output level Load impedance MASTER OUT f a 24 dBu 10 kQ MASTER OUT 2 20 dBu 10 kQ Crosstalk 20 Hz 20 kKHzBW LINE cps cee E acc A E 89 dB Channel equalizer characteristic PMU a E E EEA o to 9 dB 13 kHz MID nE EEE o to 9 dB 1 kHz LOW eene E o to 9 dB 70 Hz Microphone equalizer characteristic LOW CENTER Hl 12 dB 10 kHz to 0 dB to 12 dB 100 Hz Input output terminals USB downstream port TDO A rE E E E E E 1 set POWT SUPP Y cninn eran nie ETE E EE 5 V 500 mA or less USB upstream port BD VPE caiacist i A sama nese E REEE E 1 set MASTER OUT 1 output terminal TRS phone jack 6 3 MM uirai aia loaded 1 set MASTER OUT 2 output terminal ROCA PINJACK S araia aE a N O UA EA 1 set PHONES output terminal Stereo phone jack 6 3 MM asec ree chaaverevesanantecierverendeneveedsaariues 1 set
43. er software anyway and continue with the installation e When installing on Windows XP If Hardware Installation appears on the screen while the installa tion is in progress click Continue Anyway and continue with the installation e When the installation program is completed a completion message appears Connecting this unit and computer 1 Connect this unit to your computer via a USB cable For instructions on connections see Connecting the input output termi nals on page 10 2 Press STANDBY ON button Turn on the power of this unit 3 Press the A MIDI button The CONTROL MODE screen appears on the main unit display e The message Installing device driver software may appear when this unit is first connected to the computer or when it is connected to a different USB port on the computer Wait a while until the message Your devices are ready for use appears e When installing on Windows XP Can Windows connect to Windows Update to search for software may appear while the installation is in progress Select No not this time then click Next to continue installation What do you want the wizard to do may appear while the installation is in progress Select Install the software automatically Recommended then click Next to continue installation f Hardware Installation appears on the screen while the installation is in progress click Continue Anyway and con tinue with the installati
44. er to the back side The level of the sound output from the CH 1 terminals is adjusted 5 Switch CROSS F CURVE THRU 7X 7N the crossfader curve selector switch This switches the crossfader curve characteristics THRU Choose this when you do not want to use the crossfader ZN Set here for a curve that rises gradually ZN Set here for a curve that rises steeply When the crossfader moves away from either the left or right edge the sound is imme diately output from the opposite side 6 Set the crossfader Switch the channel whose sound is output from the speakers Left edge The CH 1 sound is output Center position The sound of CH 1 and CH 2 is mixed and output Right edge The CH 2 sound is output e This operation is not necessary when the CROSS F CURVE THRU 7X 7 selector switch is set to THRU 7 Press the MASTER button at the center of this unit Set so that the MASTER button is lit e When the MASTER button is lit the audio level output from the MASTER OUT 1 and MASTER OUT 2 terminals is displayed on the LEVEL indicator En 23 8 Turn the MASTER LEVEL control clockwise Sound is output from the speakers The LEVEL indicator lights Adjust the MASTER LEVEL control so that the orange indicator lights where the track s volume is highest at the climax etc Be careful that the red indicator does not light or the sound could be distorted
45. evice or microphone page 10 Select the channel you want to record properly Select a track on a playlist Put at least two playable tracks on the playlist When the DECK1 PHONO1 LINE1 and DECK2 PHONO2 LINE2 selector switches are set to the PHONO LINE side the auto mixing function cannot be used Set both selector switches to the DECK side page 25 After changing settings wait at least 10 seconds before turning the power off Remedy Connect the device securely all the way in USB hubs cannot be used This unit Supports such USB mass storage class USB devices as external hard disks and portable flash memory devices Check the file format of the connected USB device For the file formats sup ported by this unit see Playable USB devices on page 5 Use a USB device within this unit s rated current Such as a hard disk driven by an AC adapter or other external power supply Turn the power off wait 1 minute then turn the power back on When there are many folders or files some time may be required for loading When files other than music files are stored in folders time is required to read them as well Do not store files or folders other than music files on the USB device See Playable music file formats on page 5 Press the TIME AUTO CUE QUANTIZE button for over 1 second to cancel the auto cue function page 19 tion e TRIM control set to the proper position e fil
46. f enforce ment deemed to be severed and deleted from this Agreement and the remainder will continue in full force and effect The waiver by either party of any default or breach of this Agreement will not waive any other or subsequent default or breach No Assignment You may not assign sell transfer delegate or otherwise dispose of this Agreement or any rights or obligations under it whether voluntarily or involuntarily by operation of law or otherwise without Pioneer s prior written consent Any pur ported assignment transfer or delegation by You will be null and void Subject to the foregoing this Agreement will be binding upon and will inure to the benefit of the parties and their respec tive successors and assigns Entire Agreement This Agreement constitutes the entire agree ment between the parties and supersedes all prior or contem poraneous agreements or representations whether written or oral concerning its subject matter This Agreement may not be modified or amended without Pioneer s prior and express written consent and no other act document usage or custom will be deemed to amend or modify this Agreement fl You agree that this Agreement shall be governed and construed by and under the laws of Japan Cautions on installing the software Read Software end user license agreement carefully before installing rekordbox Mac Windows and the driver software e The included CD ROM contains installation programs
47. for over 1 Second When pressed for over 1 second auto cue turns on and off gt Setting auto cue p 19 e SHIFT press This turns the QUANTIZE function on and off gt Using the QUANTIZE function p 25 O Main unit display BACK TOP button Press The screen moves back to the layer above e Press for over 1 second Press for over 1 second to move to the top layer Ei Rotary selector El REMAIN This lights when the time display is set to the remaining time A CUE This lights when auto cue is set QUANTIZE This is displayed when QUANTIZE is turned on 18 En Time display minutes seconds milliseconds Playing speed display The value changes according to the position of the TEMPO slider Playing speed adjustment range display This indicates the range in which the playing speed can be adjusted with respect to the original playing speed recorded on the medium BPM Displays BPM Beats Per Minute of the track currently being played Playing address display The track is displayed as a bar graph The current playback posi tion is displayed as a white vertical line When the elapsed time is displayed the left edge of the graph lights When the remaining time is displayed the display turns off from the left side The entire graph flashes slowly when there are less than 30 seconds remaining in the track then begins flashing rapidly when less than 15 seconds remain Caching meter When tracks are lo
48. fully clockwise 16383 16383 en turned fully counterclockwise 0 When ned fully clockwise 16383 16383 en turned fully counterclockwise ned fully clockwise 16383 6383 en turned fully counterclockwise 0 When turned fully clockwise 16383 0 16383 When turned fully counterclockwise 0 When turned fully clockwise 16383 0 16383 When turned fully counterclockwise turned fully clockwise 16383 0 16383 en turned fully counterclockwise 0 When turned fully clockwise 16383 0 16383 When turned fully counterclockwise 0 When turned fully clockwise 16383 0 16383 When turned fully counterclockwise turned fully clockwise 16383 0 16383 When turned fully counterclockwise 0 When turned fully clockwise 16383 0 16383 When turned fully counterclockwise 0 When turned fully clockwise 16383 0 16383 When turned fully counterclockwise turned fully clockwise 16383 0 16383 en turned fully counterclockwise 0 When turned fully clockwise 16383 0 16383 When turned fully counterclockwise 0 When turned fully clockwise 16383 0 16383 When turned fully counterclockwise 0 When turned fully clockwise 16383 0 16383 When turned fully counterclockwise 0 When turned fully clockwise 16383 0 16383 When turned fully counterclockwise 0 When turned fully clockwise 16383 6383 en turned fully counterclockwise 0 When fully clockwise 16383 Deck B ia oO O wo A O F D amp w ay TRIM co
49. g to the DJ software s audio output settings page 26 Sound being played is interrupted Is the driver software s latency value suitable Set the driver software s latency to a suitable value Page 8 when using DJ software Set the DJ software s latency to a suitable value Wireless LAN Problem Check Remedy Tracks cannot be loaded via wireless Is the wireless LAN connection properly Connect the mobile device or computer and this unit properly by wireless LAN connection connected page 11 Is the link established For instructions on establishing the link see the User s Manual for rekordbox iIOS Android or the Operating Instructions for rekordbox Mac Windows Are over four mobile devices or computers The maximum total number of units computer and or mobile devices that can connected be connected simultaneously is four Disconnect unnecessary connections at LINK DISCONNECT on the UTILITY screen page 24 Is the LOAD LOCK function on Set LOAD LOCK on the UTILITY screen to OFF or pause the currently play ing track before loading page 27 Links cannot be established Is the wireless LAN connection properly Connect the mobile device or computer and this unit properly by wireless LAN connected page 11 For instructions on establishing the link see the User s Manual for rekordbox iOS Android or the Operating Instructions for rekordbox Mac Windows Are over four mobile devices or computers The max
50. hts when a link with the mobile device or computer is established To turn the power on Press STANDBY ON button Turn on the power of this unit The STANDBY ON indicator lights green To set to the standby mode When this unit s power is on press the STANDBY ON button for over 1 second This unit is set to the standby mode The STANDBY ON indicator lights red e When the STANDBY ON button is pressed again the power turns on e This unit is equipped with an auto standby function For details see About the auto standby function on page 27 USB device section USB device insertion slot Insert USB devices here MASTER REC button This is used to record the sound output from this unit on aUSB device USB STOP button Press this for over 2 seconds before disconnecting USB devices from this unit Recording the performance The same sound as the sound being output from the MASTER OUT 1 and MASTER OUT 2 terminals can be recorded as a WAV file on a USB device e The name of the files created when the sound is recorded is in the format REC WAV is a 3 digit number 1 Connect the USB device to the USB device insertion slot 2 Press the MASTER REC button Recording starts The MASTER REC indicator lights e When the MASTER REC button is pressed again the MASTER REC indicator turns off and recording stops e Recording is possible for about 90 minutes on a1 GB USB device e Recor
51. icator stops flashing remain ing lit the track name is displayed on the main unit display and playback starts by factory default Using this unit s rotary selector to load tracks from a mobile device or computer via wireless LAN 1 Connect the mobile device or computer to this unit via wireless LAN 2 Launch rekordbox on the mobile device or computer and establish the link 3 Press this unit s A rekordbox button The mobile devices or computers connected to this unit are displayed on the main unit display 4 Turn this unit s rotary selector to select the mobile device or computer then press the rotary selector Use this unit s rotary selector to select the mobile device or computer to be operated 5 Turn this unit s rotary selector to select the track from the track collection in rekordbox on the mobile device or computer e To move to lower layers in a folder select the folder then press the rotary selector e To return to a higher level press the BACK TOP button e When the BACK TOP button is pressed for over 1 second the screen moves back to the layer above 6 Press this unit s rotary selector Track loading starts The jog dial indicator on the deck on which the track is being loaded flashes Once playback is possible the jog dial indicator stops flashing remain ing lit the track name is displayed on the main unit display and playback starts by factory default Loading tracks from USB devices
52. ich the effect is synchronized FX SELECT TRANS FLANGER ECHO ROLL buttons Turns the effects on and off LEVEL DEPTH control Adjusts the quantitative parameter of the effect Using the beat effect function This unit is equipped with four effect buttons Effects can be applied to the sound by pressing one of the effect buttons Press one of the FX SELECT TRANS FLANGER ECHO ROLL buttons The button that was pressed flashes The effect is applied in beat with the track The effect differs for the different buttons For details on the different effects see the table below e When a button that is flashing is pressed again the effect is turned off Effect Name LEVEL DEPTH Sets the balance between Descriptions Cuts the sound according to TRANS the beat multiple set with the the original sound and the BEAT control effect sound The further the control is Creates a one cycle flanger turned clockwise the more FLANGER effect according tothe beat the effect is stressed multiple set with the BEAT When turned all the way control counterclockwise only the original Sound is output Outputs a delay sound several times that attenuates gradually according to the oe we Use this to set the balance ECHO between the original sound With 1 1 beat echoes the delay sounds are faded out according to the track s tempo even after the input sound has been cut and the echo sound
53. ickly search for tracks Searching by specifying the first character jump When the item names in the category are sorted in alphabetical order you can move to items beginning with the specified character e This function may not work for some categories 1 Press the lt gt USB button Switch to the BROWSE display 2 Turn the rotary selector then press it Select the category 3 Press the rotary selector for at least 1 second The mode switches to the character jump mode 4 Turn the rotary selector The character displayed in the top left switches Select the character to which you want to move 5 Press the rotary selector The display switches to the item selected in step 4 Searching by inputting a character string This function lets you display only the artists albums tracks or files containing the character string you input e Categories not selected in the Preferences in rekordbox Mac Windows are not displayed 1 Press the lt USB button Switch to the BROWSE display 2 Turn the rotary selector Select SEARCH 3 Press the rotary selector The display switches to the character input screen 4 Using the rotary selector to input characters Turn the rotary selector and select the desired character then press the rotary selector to enter that character e Repeat this operation to input other characters 5 Once you have completed inputting the character string press the rot
54. imum total number of units computer and or mobile devices that can connected be connected simultaneously is four Disconnect unnecessary connections at LINK DISCONNECT on the UTILITY screen page 24 UONPWOJU eUOI IPpY Track loading does not finish or is Is the wireless LAN connection properly Connect the mobile device or computer and this unit properly by wireless LAN slow connected page 11 Jog dial Indicator does not stop Is the link established For instructions on establishing the link see the User s Manual for rekordbox flashing iOS Android or the Operating Instructions for rekordbox Mac Windows Are 2 tracks being loaded simultaneously In these cases track loading may be slow Is the device to which you are trying to transfer the track far away Are other wireless signals being used nearby Loop playback starts suddenly on Is the wireless LAN connection properly The wireless LAN connection may have been cut Check the connection status tracks loaded via wireless LAN connected Emergency loop function Connection with mobile device is not Is there a device producing electromagnetic waves Either install this unit away from the device producing electromagnetic waves or possible mobile device cannot be in the 2 4 GHz band microwave oven other wire stop using the device producing electromagnetic waves operated or no sound is produced less LAN device etc nearby Are the mobile device and this uni
55. in the follow ing 12 languages English French German Italian Dutch Spanish Portuguese Russian Chinese simplified characters Chinese traditional char acters Korean Japanese e When using an operating system in any language besides the ones listed above select English during the installation procedure rekordbox f Driver Supported operating systems Mac software Windows Mac OS X 10 5 8 10 6 or 10 7 J Windows 7 32 bit version J J Home Premium 7 Professional Ultimate 64 bit version v v Windows Vista 32 bit version J J Home Basic Home Premium Business 64 bit version J J H Ultimate SP2 or later Windows XP Home Edition 32 bit version J J Professional SP3 or later 1 When using a 64 bit version of Windows the driver software can only be used for 32 bit applications Minimum operating environment for rekordbox Mac Windows Check that the computer provides the operating environment described below before starting installation Macintosh computer equipped with For Mac OS X a Dual Core 1 6 GHz or greater Intel processor CPU For Windows 7 PC AT compatible computer equipped Windows Vista and with a Dual Core 2 0 GHz or greater Windows XP Intel processor Recuites 1 GB or more of RAM memory bie 250 MB or more of free Space not including space for storing music files etc Optical drive Optical disc drive on
56. ing the jog dial When the jog dial is released after scratching the track returns to the cue point and playback resumes from there e tis also possible to use the sound loaded into this unit using the SAMPLE LAUNCH button with the jog drum function Using the QUANTIZE function This function can be used to play auto beat loops apply beat effects etc in tempo with the currently playing track based on the track s GRID information as analyzed with rekordbox e Music files must be analyzed with rekordbox Mac Windows in advance in order to use the QUANTIZE function For instructions on analyzing music files with rekordbox Mac Windows also refer to the User s Manual for rekordbox iOS Android or the Operating Instructions for rekordbox Mac Windows e The QUANTIZE function does not work with the ROLL and ECHO effects Press the TIME AUTO CUE QUANTIZE button while pressing the SHIFT button The QUANTIZE function turns on When auto beat loops are played or beat effects are applied they are played in tempo with the track e When the TIME AUTO CUE QUANTIZE button is pressed again while pressing the SHIFT button the QUANTIZE function turns off Using the SYNC function This function can be used to automatically synchronize the tempo BPM and beat positions on the left and right decks based on the tracks GRID information as analyzed with rekordbox e Music files must be analyzed with rekordbo
57. ioration of the communication conditions In this case loop playback begins automatically and EMERGENCY LOOP is displayed on the main unit display When communications conditions recover the EMERGENCY LOOP display turns off Press the AUTO BEAT LOOP control at this time to cancel looping To output the sound of channel 1 CH 1 To output the sound of CH 2 channel 2 replace CH 1 with CH 2 DECK1 with DECK2 and PHONO1 LINE1 with PHONO2 LINE2 in the procedure below 1 Switch the DECK1 PHONO1 LINE1 selector switch in the CH 1 section Select the input source for CH 1 from among the devices connected to this unit DECK1 Selects the USB device or the unit connected by wire less LAN PHONO1 LINE1 Selects the device connected to the PHONO1 LINE1 terminals uol e19ado JIseg 2 Press the MASTER button at the center of this unit Set so that the MASTER button is off e When the MASTER button is off the audio level input to CH 1 and CH 2 is displayed on the LEVEL indicator 3 Turn the CH 1 TRIM control clockwise Adjusts the audio level input to the CH 1 terminal The LEVEL indicator lights when sound is properly being input to CH 1 Adjust the TRIM control so that the orange indicator lights where the track s volume is highest at the climax etc Be careful that the red indicator does not light or the sound could be distorted 4 Move the CH 1 channel fad
58. iries on rekordbox operating procedures or technical issues read the rekordbox operating instructions and online manual and check the FAQ provided on the rekordbox online support site lt rekordbox online support site gt http rekordbox com e User registration on the rekordbox online support site is required prior to making inquiries concerning rekordbox e You will need to enter your license key during user registration so please have it handy Also be sure not to forget the login name your e mail address and the password specified for your user registra tion as well as the license key e PIONEER CORPORATION collects your personal information for the following purposes 1 To provide customer support for your purchased product 2 Toinform you of product or event information by e mail 3 To obtain feedback collected by survey for product planning purposes Your personal information is kept confidential corresponding to the privacy policy set forth by our company Pioneer s privacy policy can be viewed on the rekordbox online support site e When making inquiries regarding rekordbox please be sure to fur nish your computer type and specifications CPU installed memory other connected peripherals etc the operating system and version used as well as concrete information regarding the issue at hand To inquire about configuring your computer with non Pioneer peripheral devices and to obtain the corresponding technica
59. ithin the DJ software This unit s MASTER LEVEL control Q CH1 button and Q CH2 button can be used Set the DJ software s audio output settings as described below MASTER OUT L PIONEER XDJ AERO 1 MASTER OUT R PIONEER XDJ AERO 2 MONITOR OUT L PIONEER XDJ AERO 3 MONITOR OUT R PIONEER XDJ AERO 4 e o close the UTILITY screen press the INFO UTILITY button About the playback history HISTORY When tracks managed with rekordbox are played the playback history is registered at HISTORY e The playback history is stored on the playback device The maximum number of tracks that can be recorded is 999 The playback history is not recorded if there is not enough free space on the playback device or if the device is write protected e Anew HISTORY is created each time the power is turned on and off or the USB device is disconnected then reconnected Changing the settings 1 Press the INFO UTILITY button for over 1 second About the auto standby function The UTILITY screen is displayed When the auto standby function is turned on the power is automatically 2 Use the rotary selector to change the setting set to the standby mode after the set time has passed with all of the e When the BACK TOP button is pressed the previous screen conditions below met reappears That none of this unit s buttons or controls are operated That this unit s channel level indicator is not lit That the
60. king use such as broadcasting terrestrial satellite cable or other types of broadcast ing streaming on the Internet Intranet a corporate network or other types of networks or distributing of electronic information online digi tal music distribution service You need to acquire the corresponding licenses for such uses For details see http www mpd3licensing com Cautions on copyrights rekordbox restricts playback and duplication of copyright protected music contents e When coded data etc for protecting the copyright is embedded in the music contents it may not be possible to operate the program normally e When rekordbox detects that coded data etc for protecting the copyright is embedded in the music contents processing playback reading etc may stop Recordings you have made are for your personal enjoyment and accord ing to copyright laws may not be used without the consent of the copy right holder e Music recorded from CDs etc is protected by the copyright laws of individual countries and by international treaties It is the full respon sibility of the person who has recorded the music to ensure that it is used legally e When handling music downloaded from the Internet etc it is the full responsibility of the person who has downloaded the music to ensure that it is used in accordance with the contract concluded with the download site Using the online support site Before making inqu
61. l support contact the specific manufacturer or retailer e Further version updates are anticipated for improved functionality and performance of rekordbox Update programs will be available for download on the rekordbox online support site We strongly recom mend you perform these updates and always use the latest version of rekordbox e The software screens used in these operating instructions are from the development stage and may differ from the actual screens Specifications AC adapter POWE aieeaa T A E S AC 100 V to 240 V 50 Hz 60 Hz Rated CUEN crara E EE T 0 6 A Rated OUTPUT eieaa n Ee E EAE rt E ERG DC 12 V 2A Power consumption SUGIICDY u cdinisvsiaccsusvevusdailidsdeajeeldcracidusads sadcataaeees 0 5 W General Main Unit OVS COIN STMT Oust seccades custrrectentnnr En ERE RAEAN 1 3 A Maun wiit Wegt narisane eare EAT ETEEN ETET EREET 3 7 kg Max external dimensions n 623 mm W x 65 mm H x 289 5 mm D Tolerable operating temperature cccceccceeestsseeereeaes o Gh FID Tolerable operating humidity wc 5 to 85 no condensation Wireless LAN section Supported standards vvccccccesessssseeeeeeeeen IEEE 802 11b g n 2 4 GHz band Audio Section SAMPUN AE eet ane sahara E E AA ety A AS 44 1 kHz ADDA CONVENE iien e a E EE 24 bits Frequency characteristic WLAN USB LINE n 20 Hz to 20 kHz S N ratio MASTER OUT 1 rated output A WEIGHTED WLAN USB when external input terminal not connected 105 dB BO ea
62. le click the CD_menu exe icon 2 When the CD ROM s menu is displayed select rekordbox Install Music Management Software then click Start Ga Pioneer Cr Pioneer English Thank you for purchasing this product Please read and understand the Software End User License Agreement before installing or using this software Use of this software constitutes agreement to the terms of the Software End User License Agreement XDJ AERO Operating Instructions rekordbox Read Before Use PDF file rekordbox Install Music Management Software version 1 6 0 Install Dnver Software XDJ AERO 1 000 Adobe Reader is required to view POF files E you do not have Adobe Reader please click the bution at left to download E Get fame ADOBE READER Adobe the Adobe logo and Reader are ether registered trademarks or trademarks of Adobe Systems Incorporated im the United States and or other countries e Toclose the CD ROM menu click Exit 3 Install rekordbox Mac Windows following the instructions on the screen e Click Cancel to cancel installation after it has started Launching rekordbox Mac Windows Log on as the user which was set as the computer s administrator before using rekordbox Mac Windows e When rekordbox Mac Windows is started up for the first time the license key must be input The license key is affixed to the CD ROM package e When rekordbox Mac
63. munications aie ne FAT16 FAT32 and HFS with the USB device are interrupted To restore normal operation disconnect the USB device from this unit Avoid reusing USB devices When there are many folders or files some time may be required for for which an excess current has been detected If normal operation loading is not restored if communications cannot be established after the Folders and files exceeding the limits cannot be displayed above procedure is performed try turning off this unit s power then turning it back on e ifthe USB device is split into multiple partitions only the first parti USB devices that cannot be used Or CAN DE USEC e USB devices equipped with flash card readers may not operate e Optical disc type devices such as external DVD CD drives etc are e Depending on the USB device you are using the desired perfor not supported mance may not be achieved e USB hubs cannot be used e For devices formatted in MAC OS Extended Journaled the rekord box Mac Windows library information cannot be used Playable music file formats This unit supports music files in the formats shown below File extension Compatible formats Bit depth Bit rate Sampling frequency Encoding method 32 kbps to p MP3 mp3 MPEG 1 6 bit 320 kbps 44 1 kHz CBR VBR 16 kbps to AAC m4a aac and mp4 MPEG 4 AAC LC 6 bit 44 1 kHz CBR VBR 320 kbps WAV wav WAV 6 bit 44 1 kHz U
64. n is off When SHIFT button is on Difference count value from when previously operated e Turn clockwise 1 max 30 e Turn counterclockwise 127 min 98 Rotary selector turn Bn 64 dd Bn 65 dd n_ fee Ja fon fa fa Olo o o J 5 3 NO Ke gt O Se O J M Difference count value from when previously operated AUTO BEAT LOOP control turn Tamehckuise ie man En D J NO ae Turn counterclockwise 127 min 98 80 dd OF F 0 ON 127 on OF F 0 ON 127 on on f fad OFF 0 ON 127 on 9 92 dd OF F 0 ON 127 5 MSB 0 16383 32 LSB Bn 37 0 at side 16383 at side Difference count from previous operation e Increases from 64 when turned clock Bn wise decreases from 64 when turned counterclockwise The cumulative difference count when the jog dial is turned 1 rotation is 1215 Difference count from previous operation e Increases from 64 when turned clock Bn TEMPO adjustment control 3 n Jog dial when outer section turned lt ie UJ Kej O i g ll wise decreases from 64 when turned counterclockwise The cumulative difference count when the jog dial is turned 1 rotation is 1215 Jog dial when top section pressed on fos fad OF F 0 ON 127 MIDI message computer to this unit Indicator name Remarks dd values When SHIFT button is off When SHIFT button is on PLAY PAUSE n 11 dd 9n 71 dd Of AUTO BE
65. ncompressed PCM AIFF aif aiff AIFF 6 bit 44 1 kHz Uncompressed PCM About MP3 files About WAV and AIFF files MP3 files can have a constant bit rate CBR or a variable bit rate VBR File transfer via wireless LAN is not supported for WAV and AIFF files Both types of files can be played on this unit but the search and super fast search functions are slower with VBR files If your priority is oper ability we recommend recording MP3 files in CBR About AAC files e AAC isthe abbreviation of Advanced Audio Coding a basic format of audio compression technology used for MPEG 2 and MPEG 4 e The file format and extension of AAC data depends on the applica tion used to create the data e On this unit in addition to AAC files encoded with iTunes and with the extension m4a files with the extensions aac and mp4 files can also be played However AAC files that are copyright protected such as those purchased from the iTunes Store cannot be played Also depending on the version of iTunes in which the file was encoded it may not be possible to play the file e s noA alojag Functions usable in combination with a computer About the included CD ROM This unit can be used in combination with a computer when the software is installed onto the computer from the included CD ROM The included CD ROM contains the following two software programs gt rekordbox Mac Windows music management software
66. ng on your computer About the rekordbox Mac Windows music management software rekordbox Mac Windows is a software program for purchasers of the XDJ AERO or other Pioneer DJ players to manage the music files they use for DJ play rekordbox Mac Windows may be used for classifying and searching for music files stored on your computer as well as creating playlists all of which can help improve your Du performance rekordbox Mac Windows allows the detecting measuring and editing of beats tempos BPM and other elements of your music files prior to a performance Installing rekordbox Mac Windows For Mac OS X Read Cautions on installing the software carefully before installing rekordbox Mac Windows e Authorization of the computer s administrator is required to install and uninstall rekordbox Mac Windows Log on as the user which was set as the computer s administrator before installing 1 When the included CD ROM is inserted into the computer s CD drive the CD drive opens on the screen Double click the CD_menu app icon e fthe CD drive does not open on the screen when the CD ROM is inserted use Finder to open the CD drive then double click the CD_menu app icon g rekordbox 1 0 0 Pioneer CD_menu 2 When the CD ROM s menu is displayed select rekordbox Install Music Management Software then click Start Pioneer Thank you for purchasing this product
67. nt e finstallation of the driver software is interrupted after it has started start the installation procedure over again from the beginning For Mac OS X 1 When the included CD ROM is inserted into the computer s CD drive the CD drive opens on the screen Double click the CD_menu app icon e fthe CD drive does not open on the screen when the CD ROM is inserted use Finder to open the CD drive then double click the CD_menu app icon 2 When the CD ROM menu appears select Install Driver Software XDJ AERO_Driver then click Start Pioneer Thank you for purchasing this product Please read and understand the Software End User License Agreement before installing or using this software Use of this software constitutes agreement to the terms of the Software End User License Agreement XDJ AERO Operating Instructions rekordbox Read Before Use PDF file rekordbox Install Music Management Software version 1 6 0 Install Driver Software XDJ AERO 1 000 Adobe Reader is required to view PDF files if you do not have Adobe Reader please click the Dutton at left to download A Get Paes ADOBE READER Adobe the Adobe logo and Reader are eier registered trademarks or trademarks of Adobe Systems incorporated n the United States and or other countries e Toclose the CD ROM menu click Exit 3 Proceed with installation according to the instructions on the screen For Windows 7 Windo
68. ntrol Deck C B6 37 ek Deck A as Deck B in Deck a H Deck D p Deck A Deck B w o gt ol D amp W W EQ HI control s ess N IAIN 40 S 7 uW W Oy K amp PO m D W W EQ MID control Deck C aw e l Deck B 7 Deck C a r Deck D i e Deck A 7 Deck B Deck C a Deck D I 7 k Channel fader Deck C i a B6 55 LSB Deck D EQ LOW control FILTER control urned fully counterclockwise 0 When fully clockwise 16383 urned fully counterclockwise 0 When fully clockwise 16383 0 16383 0 at lower limit 16383 at upper limit 0 16383 0 at lower limit 16383 at upper limit 0 16383 0 at lower limit 16383 at upper limit 0 16383 0 at lower limit 16383 at upper limit En 31 WW O iO K M Ww ns W W ww mo O O PO N D amp w sy SW Name HEADPHONES MIXING control HEADPHONES LEVEL control MIC ATT control MIC EQ control MIC ON OFF button MASTER VOL control a a a E MIDI message this unit to computer When SHIFT button is off When SHIFT button is on Remarks dd values 0 16383 z e 7 E a When turned fully counterclockwise 0 When 7 turned fully clockwise 16383 16383 urned fully counterclockwise 0 When y clockwise 16383 urned fully counterclockwise 0 When fully clockwise 16
69. on Adjusting the buffer size when using Windows ASIO This unit functions as an audio device conforming to the ASIO standards e fan application using this unit as the default audio device DJ software etc is running quit that application before adjusting the buffer size Click the Windows Start menu gt All Programs gt Pioneer gt XDJ AERO gt XDJ AERO Settings Utility Sets the size of the buffer when using ASIO If you make the buffer smaller then latency Audio output delay will be shorter If the audio gets cut off increase the size of the buffer so that the sound does not get cut off e s noA alojag Buffer Size 256 Sample Latency 5 8msec Standard Setting e ifthe buffer size is made large drops in audio data breaks in the sound occur less easily but the time lag due to the delay in the transfer of the audio data latency increases Checking the version of the driver software For Mac OS X Click Macintosh HD icon gt Application gt Pioneer gt XDJ AERO gt XDJ AERO driver version display utility XDJ AERO driver version display utility is displayed For Windows 7 Windows Vista and Windows XP Click the Windows Start menu gt All Programs gt Pioneer gt XDJ AERO gt XDJ AERO Settings Utility be XDJ AERO Setting Utility Copyright 2012 Pioneer Corporation Checking the latest information on the driver software For the latest information
70. on the driver software for exclusive use with this unit visit our website shown below http pioneerdj com support En 9 Connections e Connect the power cord after all the connections between devices have been completed Be sure to turn off the power and unplug the power cord from the power outlet whenever making or changing connections Refer to the operating instructions for the component to be connected e Be sure to use the power cord and AC adapter included with this product Connecting the input output terminals Rear panel front panel To power outlet Power cord included Computer powered speaker etc I To audio input terminals USB cable Audio cable InN leee Component amplifier Audio cable DJ paer Analog player Headphones To audio output To To terminals microphone headphones Headphones cord Ih El Cord hook Catch the AC adapter s power cord and USB cable on this hook when using this unit e The sound will be interrupted if the AC adapter or USB cable is disconnected during playback Using the cord hook Fasten the AC adapter s power cord and USB cable in place by hooking them on the cord hook This prevents the power cord and USB cable from being accidentally pulled and the plugs from being disconnected from the terminals USB cable Cord hook AC adapter s power cord DC IN terminal C
71. onnect the included AC adapter s DC plug here Wait until all con nections of the equipment are completed before connecting the power cord Be sure to use the power cord and AC adapter included with this product lt USB terminal Connect to a computer e AUSB hub cannot be used MASTER OUT 2 terminals Connect to a power amplifier etc MASTER OUT 1 terminals Connect powered speakers etc here Compatible with balanced or unbalanced output fora TRS connector 10 En lam codB 0dB i fa LINE PHONO selector switch Switches the function of the PHONO LINE terminals PHONO1 LINE1 and PHONO2 LINE2 terminals Connect a phono level output device analog player for MM car tridges etc or a line level output device Du player etc here Switch the terminals function according to the connected device using the LINE PHONO selector switch on this unit s rear panel E SIGNAL GND terminal Connects an analog player s ground wire here This helps reduce noise when the analog player is connected El Kensington security slot MIC ATT control Adjusts the audio level input to the MIC terminal e The gain of the sound input to the microphone differs greatly according depending on the microphone being used The MIC ATT control on this unit s rear panel is used to adjust the audio level according to the microphone before DJ perfor mances During DJ performances use the MIC LEVEL control on
72. parately Not only can the tone be adjusted to your tastes the sound for a certain range can be turned completely off by turning the control all the way counterclockwise isolator function EXTERNAL INPUT This unit is equipped with inputs for connecting such external devices as CD players or analog players DJ performances are possible using the two sets of inputs CH 1 channel 1 and CH 2 channel 2 What s in the box e CD ROM containing rekordbox Mac Windows the driver software and the operating instructions The rekordbox Mac Windows license key is attached e AC adapter e Power cord e Warranty card e Read Before Use Important e Quick Start Guide e Notice on software licenses Before you start Playable USB devices This unit Supports USB mass storage class USB devices external hard Cautions on using USB devices disks portable flash memory devices digital audio players etc Folder layers Max 8 layers e Some USB devices may not operate properly on this unit Note that Taaa aa Pioneer will accept no responsibility whatsoever for any loss of data ax NUMber O i i i ioiders 1 000 folders recorded on USB devices resulting from connection to this unit Max number 10 000 files 1 000 files for files not managed by rekordbox BID a WR a A ae of files Mac Windows detected in this unit s USB port the USB STOP indicator flashes the power supply to the USB device is cut off and com
73. point AP mode This unit is set as the master unit on the network WLAN CLIENT Sets this unit to the WLAN client mode This unit is set as a Sub unit on the network OFF Turns the wireless LAN function off 6 When APPLY CHANGES appears on the main unit display turn the rotary selector to select YES then press the rotary selector Now make the connection settings for the access point AP or WLAN client mode page 12 Setting the wireless LAN connections in the access point AP mode If the device to be connected supports the WPS standard make the con nection settings using the WPS button the WPS PIN or manually If the device to be connected does not support the WPS standard make the connection settings manually e Before starting turn on this unit s power e f connections cannot be established approximately 2 minutes after the connection settings operations below are performed the WPS indicator turns off e With connection settings in the access point AP mode note that connection with the mobile device or computer is not established if no link indicator is lit even if the WPS indicator is off Connecting using the WPS button 1 Select connection by WPS button PBC connection with the WPS connection function of a mobile device or computer e See your device s operating instructions for instructions on connect ing using the WPS button 2 Press this unit s WPS button for over 1
74. rack over 10 minutes in length loaded ls a WAV file loaded Nothing is displayed Is the auto standby function activated Have you connected an analog player with a built This unit may not operate properly due to static electricity or other external influences In this case proper operation may be restored by turning the Remedy Plug in the power cord to an AC outlet page 10 Set the STANDBY ON switch for power supply to ON page 15 Normal operation can sometimes be restored by unplugging the power cord waiting at least 1 minute then plugging the power cord back in If the symptom persists unplug the power cord and request repairs Remedy Switch the channel s input source using the DECK1 PHONO1 LINE1 and DECK2 PHONO2 LINE2 selector switches Page 23 Set the TRIM control channel faders crossfader and MASTER LEVEL contro to the proper positions Page 23 Properly set the LINE PHONO selector switch on this unit s rear panel accord ing to the connected device page 10 Adjust MASTER LEVEL so that the orange indicator on the master level indica tor lights at the peak level Page 23 UONPWOJU eUOI IPpY Adjust TRIM so that the orange indicator on the channel level indicator lights at the peak level Page 23 Properly set the LINE PHONO selector switch on this unit s rear panel accord ing to the connected device page 10 Set the audio level input to the terminals to
75. ressing a button QUANTIZE This unit is equipped with a QUANTIZE function letting you set points on beat for tracks analyzed with rekordbox even if buttons are pressed roughly When setting auto loop beats and beat effects the points are automatically set to the beat nearest the position at which the button was pressed AUTO MIX Tracks registered in playlists can automatically be played alternately on DECK1 and DECK2 When the point 30 seconds before the end of the currently playing track is reached the two tracks are automatically mixed and playback of the next track starts AUTO BEAT LOOP Loops can be set automatically without breaking the beat by press ing the AUTO BEAT LOOP control The loop s number of beats can be changed by turning the AUTO BEAT LOOP contro clockwise or counterclockwise BEAT EFFECT Beat effects are provided for each of the decks Beat effects can be applied individually to the tracks currently playing on the respective deck Beat effects can also be applied to other devices connected to the mixer section s input terminals En 3 SOUND COLOR FILTER Each channel is equipped with a SOUND COLOR FILTER function for achieving filter effects easily simply by turning the controls This lets you arrange and mix tracks intuitively during DJ performances 3BAND EQ This unit is equipped with a 3 band equalizer allowing the volume of the high medium and low frequency ranges to be adjusted se
76. s an audio device install the driver software on the computer beforehand page 8 This unit must also be selected in the DJ software s audio output device settings For details see your DJ soft ware s operating instructions 1 Connect the USB port on this unit to your computer For instructions on connections see Connecting the input output termi nals on page 10 2 Press the A MIDI button MIDI CONTROL appears on the main unit display 3 Launch the DJ software Communication with the DJ software starts The DJ software can be operated using this unit s buttons and controls e t may not be possible to use some buttons to operate the DJ software e For messages output by this unit see List of MIDI Messages on page 29 Changing the MIXER MODE There are two types of Du software mixing modes one for mixing using an external mixer and one for mixing within the DJ software On this unit either mixing mode can be used by changing the MIXER MODE setting on the UTILITY screen 1 Press the INFO UTILITY button for over 1 second The UTILITY screen is displayed 2 Turn the rotary selector select MIXER MODE then press the rotary selector 26 En 3 Turn the rotary selector select the mode you want to set then press the rotary selector XDJ AERO The sound is mixed using this unit s mixer section The DJ software can be operated using this unit s player section PC The sound is mixed w
77. simultaneously e The maximum total number of units mobile devices and or com puters with which links can be established simultaneously is four Loading tracks from mobile devices or computers via wireless LAN 1 Connect the mobile device or computer to this unit via wireless LAN 2 Launch rekordbox on the mobile device or computer and establish the link 3 Operate rekordbox on the mobile device or computer to select the track 4 Operate rekordbox on the mobile device or computer to select the deck on which the track is to be loaded then tap or click Track loading starts The jog dial indicator on the deck on which the track is being loaded flashes Once playback is possible the jog dial indicator stops flashing remain ing lit the track name is displayed on the main unit display and playback starts by factory default Loading tracks on USB devices connected to this unit from mobile devices by browsing via wireless LAN 1 Connect the mobile device by wireless LAN 2 Launch rekordbox on the mobile device and establish the link 3 Connect the USB device to this unit s USB device insertion slot 4 Operate rekordbox on the mobile device to select the track 5 Operate rekordbox on the mobile device to select the deck on which the track is to be loaded then tap Track loading starts The jog dial indicator on the deck on which the track is being loaded flashes Once playback is possible the jog dial ind
78. t button A list of music files on the mobile device is displayed 2 Tap the music file you want to add to the library The selected music file is displayed in gray e Multiple music files can be selected simultaneously To add all the displayed music files tap the add all tracks button 3 Tap the import button Analysis of the music file s begins Once analysis of the music file s is completed the track s is are added to the rekordbox iOS Android library Loading tracks There are four ways to load tracks into this unit as described below 22 En Loading tracks from mobile devices or computers via wireless LAN Loading tracks on USB devices connected to this unit from mobile devices by browsing via wireless LAN Using this unit s rotary selector to load tracks from a mobile device or computer via wireless LAN Loading tracks from USB devices To make DJ performances using a wireless LAN the LINK EXPORT function must be used after making the wireless LAN connection then establishing the link For making wireless LAN connections see Connecting by wireless LAN on page 11 For instructions on establishing the link see the User s Manual for rekordbox iOS Android or the Operating Instructions for rekordbox Mac Windows When a link is established with a mobile device or computer one of link indicators 1 to 4 lights Which link indicator s light s depends on the number of units connected
79. t s internal sampled sound sources into the respective decks and play them 1 Press the SAMPLE LAUNCH button This unit s internal sampled sound source is loaded into the deck whose button was pressed 2 Press the gt Il PLAY PAUSE button The sampled sound source is played e Sampled sound sources can be operated using this unit s deck sec tion in the same way as regular tracks Selecting the type of this unit s internal sampled sound source Press the SAMPLE LAUNCH button for over 1 second A list of this unit s internal sampled sound sources is displayed on the main unit display Turn the rotary selector to select the sampled sound source then press the rotary selector The selected sampled sound source is loaded into the deck Using the jog drum function This function can be used to switch to a mode in which sound is output when the jog dial is touched This enables DJ performances combining sampler functions and scratching 1 Press the JOG DRUM button The jog dial indicator lights red Switch the jog dial to the jog drum mode uol ei9doO pasueApy 2 Seta cue point at the point at which the sound you want to use as the sample starts For information about setting cue points see Setting Cue on page 16 3 Press the top of the jog dial Playback starts from the set cue point When you release the jog dial playback stops e The currently playing sound can be scratched by scratching while touch
80. t too far apart or Install in the same room within a line of sight distance with no obstacles of 40 is there an obstacle between them meters This line of sight distance is rough indication The actual distance at which communications are possible may differ depending on the surrounding environment Error messages When this unit cannot operate normally an error code appears on the display Check the table below and take the measures indicated If an error code not shown on the table below is displayed or if the same error code is displayed again after taking the indicated action contact your store of purchase or a nearby Pioneer service station Error code Error type Description of error Cause and action E 8304 DECODE ERROR The music files are not in an authorized format Music files that cannot be played normally are loaded Replace them with music files in an authorized E 8305 DATA FORMAT ERROR fermat Track recorded in the library playlist etc has been Erano MAREE deleted from the USB device and cannot be played To play the track load it back onto the USB device Block ni ice PHONO1 LINE1 I I I ae I I i be I I I I I 1 I File Music j Music USB rekordbox i I I I I I I ce I I I I I I I PC DECK A gt PC DECK B a PHONO2 LINE2 PC DECK B MIXER MODE XDJ AERO MIXER MODE PC PC MASTER I I I PC PHONES I eHe D P
81. tion of the jog dial without touching the top The playing speed increases when spun clockwise decreases when spun counterclockwise When spinning is stopped playback returns to the normal speed Jog drum For details on the jog drum function see Using the jog drum function on page 25 SUOI IUN pue SawWeU Yed Browse section J rekordbox D AUTO CUE s N m QUANTIZE o ye MIDI a INFO T gt UTILITY 7 A CLIE GUAT Ei gt USB button Use this to browse the contents of the USB device connected to this unit and display them on the main unit display e When rekordbox Mac Windows library information is stored on the USB device the main unit display switches to the browse display mode when the button is pressed MIDI button This unit switches to the PC control mode rekordbox button A list of the mobile devices and computers connected to this unit and on which rekordbox is installed is displayed INFO UTILITY button e Press The main unit display switches to the information display mode When in the information display mode the bottom section of the display switches between the track name and beat display each time the button is pressed e Press for over 1 second The UTILITY screen is displayed TIME AUTO CUE QUANTIZE button e Press The main unit display s time display mode switches to the elapsed time or remaining time display e Press
82. tton for over 1 second The UTILITY screen is displayed 2 Turn the rotary selector select WLAN INFORMATION then press the rotary selector See page 27 for the list of WLAN INFORMATION items 3 Select the item you want to check then press the rotary selector The settings are displayed e When the BACK TOP button is pressed the screen returns to the WLAN INFORMATION screen 4 Press the INFO UTILITY button The UTILITY screen closes suol I9UUOZ Part names and functions ooon THRU x 7X TM ll TW A 1 Power amp wireless section page 15 2 USB device section page 15 3 Player section page 16 4 Browse section page 18 5 Mixer section page 20 6 Effect section page 21 Power amp wireless section vo oO STANDBY ON WPS Ea STANDBY ON indicator This lights when this unit s power is on or in standby STANDBY ON button This switches this unit s power between on and standby WPS indicator This lights when connection with an access point is established when in the WLAN client mode The indicator flashes during WPS connection settings WPS button This is used for wireless LAN connection to devices supporting con nection by WPS button Link indicators This lig
83. under Mixing using the channel faders on page 24 3 Move the crossfader gradually to the right While checking the sound output from the speakers operate the cross fader to substitute the sound of CH 1 with the sound of CH 2 Mixing is completed once only the CH 2 sound is being output from the speakers Disconnecting links Links with mobile devices can be disconnected e For instructions on disconnecting links with computers see the Operating Instructions for rekordbox Mac Windows 1 Press the INFO UTILITY button for over 1 second The UTILITY screen is displayed 24 En 2 Turn the rotary selector to select LINK DISCONNECT then press the rotary selector A list of the mobile devices on which rekordbox iOS Android is installed and with which links with this unit are established is displayed on the main unit display 3 Turn the rotary selector to select the mobile device whose link you want to disconnect then press the rotary selector The link with the selected mobile device is disconnected Advanced Operation Using the auto mix function Use this function to automatically play the selected playlist continuously When the point 30 seconds before the end of the currently playing track is reached the two tracks are crossfaded when using the SYNC func tion or faded in and out in other cases and playback of the next track starts e The track following the first track played when th
84. urve characteristics Crossfader The sound of the respective channels is output according to the curve characteristics selected with the THRU ZN Z selector switch Q CH2 button The sound of CH 2 is monitored 9 CH1 button The sound of CH 1 is monitored HEADPHONES LEVEL control Adjusts the audio level output from the PHONES terminal HEADPHONES MIXING control Adjusts the balance of the monitor volume between the sound of the deck whose Qh button is pressed and the master sound Adjusting the sound quality Turn the HI MID LOW controls for the respective channels e The sound for that range can be turned completely off by turning the control all the way counterclockwise isolator function Monitoring sound with headphones 1 Connect headphones to the PHONES terminal For instructions on connections see Connecting the input output termi nals on page 10 2 Press the C CH1 or i CH2 button Select the channel you want to monitor e This operation is not necessary to monitor the sound output from the MASTER OUT 1 and MASTER OUT 2 terminals the sound of the master channel 3 Turn the HEADPHONES MIXING control When turned counterclockwise The volume of CH 1 and CH 2 becomes relatively louder Atthe center position The volume of the CH 1 and CH 2 sound is the same as the volume of the sound output from the MASTER OUT 1 and MAS
85. usic files stored on mobile devices and computers can also be played The unit can also be used as a DJ software controller and audio interface WIRELESS CONNECTION This unit is equipped with a wireless LAN function DJ performances are possible with mobile devices or computers connected by wireless LAN rekordbox i0S Android rekordbox a smartphone application that can be downloaded free of charge can be used for the management analysis settings creation history storage of music files on mobile devices Using music files man aged with rekordbox iOS Android in combination with this unit makes it possible to achieve outstanding DJ performances e Inthis manual the iOS Android edition of rekordbox is referred to as rekordbox iOS Android rekordbox Mac Windows The included rekordbox Mac Windows music management software can be used for the management analysis settings creation history storage of music Tiles on computers Using music files managed with rekordbox Mac Windows in combination with this unit makes it pos sible to achieve outstanding DJ performances e Inthis manual the Mac Windows edition of rekordbox is referred to as rekordbox Mac Windows rekordbox is used to indicate the editions of rekordbox Mac Windows and rekordbox iOS Android simultaneously LINK EXPORT When a mobile device or computer is connected by wireless LAN rekordbox music files and management data
86. ver function Used to set the frequency band s width Only set 40 MHz when communications are possible by IEEE802 11n Otherwise leave this at 20 MHz When WPA or WPA2 is set at SECURITY under NETWORK SETTING the encryption key s renewal interval can be set When this setting is made the encryption key is renewed automati cally at specific intervals maintaining a more secure status Resets the settings at WLAN SETTING to the factory defaults Displays up to 10 receivable networks SSIDs in the area OTHER at the bottom is used to specify an SSID that is not displayed Used to select whether to acquire the network settings automati cally using the DHCP function on the connected network side or to set them manually ENABLE Acquire the IP address subnet mask etc automatically DISABLE Input the IP address subnet mask etc manually When in the access point mode the fixed values below are set IP address 192 168 1 1 Subnet mask 255 255 255 0 When DHCP CLIENT is set to DISABLE the values must be input manually List of MIDI Messages Of the 3 bytes in MIDI messages the first and second bytes are expressed in decimal the third byte in hexadecimal MIDI channel MIDI ch Value Deck A n 0 Deck B Deck C Deck D Effect A C Effect B D Mixer z Y lt M MIDI message this unit to computer Remarks dd values When SHIFT butto
87. ws Vista and Windows XP 1 Insert the included CD ROM into the computer s CD drive The CD ROM menu is displayed e fthe CD ROM menu does not appear when the CD ROM is inserted open the CD drive from Computer or My Computer in the Start menu then double click the CD_menu exe icon 2 When the CD ROM menu appears select Install Driver Software XDJ AERO_Driver then click Start ae m Pioneer Pioneer English Thank you for purchasing this product Please read and understand the Software End User License Agreement before installing or using this software Use of this software constitutes agreement to the terms of the Software End User License Agreement E XDJ AERO Operating Instructions rekordbox Read Before Use PDF file rekordbox Install Music Management Software version 1 6 0 Install Driver Software XDJ AERO_ 1 000 Adobe Reader is required to view PDF files you do not have Adobe Reader please click the bution at left to download E cet Pang ADOBE READER Adobe the Adobe logo and Reader are either registered trademarks or trademarks of Adobe Systems Incorporated in the United States and or other countries e e Toclose the CD ROM menu click Exit 3 Proceed with installation according to the instructions on the screen If Windows Security appears on the screen while the installation is in progress click Install this driv
88. x Mac Windows in advance in order to use the SYNC function For instructions on analyzing music files with rekordbox Mac Windows also refer to the User s Manual for rekordbox iOS Android or the Operating Instructions for rekordbox Mac Windows e The following describes the procedure for synchronizing the DECK2 track to the DECK1 track 1 Play a track that has been analyzed with rekordbox on DECK1 The deck on which a track that has been analyzed with rekordbox is played first is set as the MASTER for the SYNC function 2 Play a track that has been analyzed with rekordbox on DECK2 3 Press the SYNC button for DECK2 DECK2 is synchronized to the tempo BPM and beat positions of the track playing on DECK1 e When the SYNC button is pressed again the SYNC function turns off e Use the procedure below to restore the currently playing track s tempo BPM to its original tempo after turning the SYNC function off First move the tempo slider to the position of the synchronized tempo BPM then set it back to the center position Reload the same track Using the DJ software This unit also outputs the operating data for the buttons and dials in MIDI format If you connect a computer with a built in MIDl compatible DJ software via a USB cable you can operate the DJ software on this unit The sound of music files being played on the computer can also be output from the XDJ AERO To use this unit a
89. xordbox Zp O0 HHEBM O O WLAN client mode In this case this unit is a sub unit on the LAN network Data is exchanged with the mobile devices or computers via a wireless LAN access point device A OO HEHH o O Setting the wireless LAN function s operation mode Set the wireless LAN function s operation mode before connecting this unit by wireless LAN The buttons and controls below are used for making the wireless LAN function s operation mode settings and wireless LAN connection settings e By default the access point AP mode is set suoljI9UUOZ UEC J o CD O STANDBY ON WPS TIME rekordbox AUTO CUE Mm MIDI INFO USB STANDBY ON indicator STANDBY ON button WPS indicator WPS button Link indicators Rotary selector BACK TOP button INFO UTILITY button Press STANDBY ON button Turn on the power of this unit The STANDBY ON indicator lights green 2 Press the INFO UTILITY button for over 1 second The UTILITY screen is displayed 3 Turn the rotary selector select WLAN SETTING then press the rotary selector See page 28 for the list of WLAN SETTING items BROEEeSe 4 Turn the rotary selector select MODE then press the rotary selector 5 Turn the rotary selector select the mode you want to set then press the rotary selector ACCESS POINT AP Sets this unit to the access

Pioneer XDJ-AERO User's Manual

Contents

Download Pdf Manuals

Related Search

Related Contents