Philips VOIP8410 User's Manual
Contents
1. Note The base can register up to 4 handsets then the base unit registration memory is full If you attempt to register an additional handset the registration process will be aborted O Verify the signal strength The signal icon Q displays the link status between the handset and the base unit Signal icon 0 The handset and base unit are linked They can communi cate No signal icon The handset and base unit have lost link They are not able to communicate Take your handset closer to the base unit to reconnect the link If you move too far away from the base unit while you are on the phone you will hear warning tones notifying you that the handset is almost out of range lost link Take the handset closer to the base unit or your call will be cut off shortly after the warning Note If your handset has lost link you will not be able to make or receive any call In addition you will not be able to carry out many of the phone functions and features 3111 285 33661 XtraHS QSG_VOIP841 US EN gqxd 19 01 2007 21 40 Seite 2 Enjoy Call another handset Answer 1 Press in 2 Scroll to the handset you want to call 3 Press Call Wait for the other party to answer your call 4 Press to cancel or end the intercom call 1 Press Answer to answer the incoming Skype call The internal call will be ended automatically 2 Press End or to end the Skype2. XtraHS QSG_VOIP841 US EN gqxd 19 01 2007 21 40 Seite 1 What s in the box h Two 750mAh AAA NiMH batteries Handset Belt clip Quick start guide Welcome Quick start guide What else will you need A VOIP841 Power supply for charger PHILIPS User manual P Connect O Connect the charger Insert the plug of the charger power adapter into the socket on the bottom of the charger Plug the power adapter into your power outlet Place the 2 rechargeable NiMH AAA batteries observing their polarities into the battery compartment on the handset Slide the battery door firmly into place Before first use put the handset on the charger and charge batteries for 14 hours Install O Register the handset Registration allows communication between the base unit and handset s If the handset cannot communicate with its base you will not be able to make any call or use many of the functions and features on the phone 1 Press REg Register shall be highlighted 2 Enter the system PIN Default 0000 Use Clear to correct typing errors 3 Press Enter to confirm Your handset starts searching for the base 4 Press Cn on the base unit until the two indications turn off e f registration is successful the signal icon ff displays steadily Tip If registration failed repeat the above procedure
3. call Call transfer During a call in progress you can tranfer the external call to a specific handset 1 Press m during the call 2 Scroll to the handset you want to call 3 Press Call 4 Press after the other party answers your call The external call is now transferred to the other handset Conference call allows one external call to be shared with two handsets registered on the same base 1 Press m during the call with the external caller 2 Scroll to the handset you want to call 3 Press Call Wait for the other party to answer your call 3 Press Conf e You are now on a 3 way conference call 4 Press to end the conference call p elcome Quick start guide 1 2 3 Connect Install Enjoy A V Cem Never use non rechargeable batteries
Download Pdf Manuals
Related Search