Philips HTL7180/F7 User's Manual
Contents
1. Standby On Standby indicator When the SoundBar is in standby the HDMI selection standby indicator turns red HDMI ARC Switch your source to HDMI ARC connection HDMI 1 Switch your source to the HDMI IN 1 connection EN 5 English HDMI 2 Switch your source to the HDMI Rear connectors IN 2 connection GB Source buttons OPTICAL Switch your audio source to the optical connection COAX Switch your audio source to the coaxial connection AUDIO IN Switch your audio source to the AUDIO In connection 3 5mm jack AUX Switch your audio source to the AUX connection ii Bluetooth Switch to Bluetooth mode CDE O NIGHT MODE ON OFF Turn night mode on or off O Volume control O AC MAINS Increase or decrease volume Connect to the power supply amp Mute or restore volume O TO TV HDMI OUT ARC 6 V SURR Connect to the HDMI ARC input on the Toggle between stereo and virtual TV surround sound In HDMI in mode connected via HDMI IN 2 E HDMI IN 1 or HDMI IN 2 press and Connect to the HDMI output on a digital hold to switch audio output through device the SoundBar speaker or TV speaker HDMI IN 1 BASS Connec o the HDMI output on a digital Increase or decrease bass device TREBLE DIGITAL IN OPTICAL Connect to an optical audio output on the2. or d if any serial number has been removed or defaced or e product accessories or consumables sold AS IS without warranty of any kind by including refurbished Philips product sold AS IS by some retailers This Limited Warranty does not cover Shipping charges to return defective product Labor charges for installation or setup of the product adjust ment of customer controls on the product and installation or repair of antenna signal source systems outside of the product Product repair and or part replacement because of improper installation or maintenance connections to improper voltage supply power line surge lightning damage retained images or screen markings resulting from viewing fixed stationary con tent for extended periods product cosmetic appearance items due to normal wear and tear unauthorized repair or other cause not within the control of the company Damage or claims for products not being available for use or for lost data or lost software Damage from mishandled shipments or transit accidents when returning product A product that requires modification or adaptation to enable it to operate in any country other than the country for which it was designed manufactured approved and or authorized or repair of products damaged by these modifications A product used for commercial or institutional purposes including but not limited to rental purposes Product lost in shipment an
3. e Reset your SoundBar to its factory settings e On the remote control select the correct audio input e Make sure that the SoundBar is not muted No sound from the wireless surround speakers e Wirelessly connect the speakers to the main unit see Pair up with the speakers on page 8 e Dock the wireless surround speakers into the main unit to charge the battery EN 15 English No sound from the wireless subwoofer e Wirelessly connect the subwoofer to the main unit see Pair up with the subwoofer on page 9 Distorted sound or echo e If you play audio from the TV through the SoundBar make sure that the TV is muted Audio and video are not synchronized e Press AUDIO SYNC to synchronize the audio with the video Bluetooth A device cannot connect with the SoundBar e The device does not support the compatible profiles required for the SoundBar e You have not enabled the Bluetooth function of the device See the user manual of the device on how to enable the function e The device is not correctly connected Connect the device correctly e The SoundBar is already connected with another Bluetooth device Disconnect the connected device then try again Quality of audio play from a connected Bluetooth device is poor e The Bluetooth reception is poor Move the device closer to the SoundBar or remove any obstacle between the device and the SoundBar The connected Bluetooth
4. 1 tweeter Dimensions WxHxD 1035 x 73 x 156 mm with 2 surround speakers attached e Weight 3 9 kg Surround speakers Speaker impedance 8 ohm e Speaker drivers 2 x 63 5 mm 2 5 full range Dimensions WxHxD 191 x 73 x 156 mm e Weight 0 7 kg each Subwoofer e Power supply 120 V 60 Hz Power consumption 30 WV Standby power consumption lt 0 5 W e Impedance 4 ohm e Speaker drivers 1 x 165 mm 6 5 woofer Dimensions WxHxD 200 x 510 x 201 mm e Weight 4 9 kg Wall mount Dimensions WxHxD 40 x 100 x 26 5 mm e Weight 0 1 kg each Remote control batteries e 2x AAA RO3 1 5 V 7 Troubleshooting A Warning Risk of electric shock Never remove the casing of the product To keep the warranty valid never try to repair he product yourself f you have problems using this product check he following points before you request service f you still have a problem get support at www philips com support Main unit The buttons on the SoundBar do not work Disconnect the SoundBar from the power supply for a few minutes then reconnect Sound No sound from SoundBar speakers e Connect the audio cable from your SoundBar to your TV or other devices However you do not need a separate audio connection when e the SoundBar and TV are connected through HDMI ARC connection or e a device is connected to the HDMI IN connector on your SoundBar
5. 12 EN Ly When auto volume is turned off the V SURR indicator blinks twice Synchronize picture and sound If the audio and video are not synchronized delay the audio to match the video 1 Press AUDIO SYNC to synchronize the audio with the video e AUDIO SYNC increases the sound delay and AUDIO SYNC decreases the sound delay L gt When you change the value of sound delay the more value delay you set the more indicators on the main unit light up Night mode For quiet listening decrease the volume of loud sounds when audio is played Night mode is only available for Dolby Digital soundtracks 1 Press NIGHT MODE ON OFF to turn night mode on or off L gt When night mode is turned on the V SURR indicator blinks once L gt When night mode is turned off the V SURR indicator blinks twice Note e If auto volume is set to turned on you cannot enable the night mode MP3 player Connect your MP3 player to play your audio files or music What you need e An MP3 player A 3 5mm stereo audio cable 1 Using the 3 5mm stereo audio cable connect the MP3 player to the AUDIO IN connector on your SoundBar Press AUDIO IN Press the buttons on the MP3 player to select and play audio files or music On the MP3 player it is recommended to set the volume in the range of 80 maximum volume wN Play music via Bluetooth Through Bluetooth connect the SoundBar with your B
6. Increase or decrease treble V ora digital device DIGITAL IN COAXIAL Connect to a coaxial audio output on the AUTO VOLUME ON OFF TV ora digital device Turn auto volume on or off AUDIO SYNC Increase or decrease audio delay AUDIO IN AUX Connect to an analog audio output on the TV or an analog device Connectors AUDIO IN This section includes an overview of the Audio input from for example an MP3 connectors available on your SoundBar player 3 5mm jack Wireless speakers The SoundBar comes with 2 wireless surround speakers left and right s 00 The illustration above is for the right speaker s op view and bottom view O Speaker indicator During wireless pairing between the main unit and the speaker the indicator blinks red quickly e When the pairing succeeds the indicator turns into solid white undocked from the main unit or the indicator lights up white 30 seconds hen fades off being docked into the main unit e When the pairing fails or pairing remains undone the indicator blinks red slowly When the speaker is being charged docked into the main unit the indicator lights up amber When the speaker goes to standby the indicator blinks amber O Connection key Press with a pin to enter the pairing mode for the speaker 3 POWER ON Press to turn on the wireless speaker if it a
7. Para obtener informaci n de productos de reciclaje por favor visite www recycle philips com Pour tout renseignement sur le recyclage des produits veuillez visiter www recycle philips com pausa e PHILIPS Contents 1 Important mportant safety instructions Care for your product Care of the environment Help and support WM UN NN Your SoundBar ndicators on the main unit Remote control Connectors Wireless speakers Wireless subwoofer NN DW 4 Connect and set up Charge speakers Pair up with speakers subwoofer Place speakers Connect to TV Connect digital devices through HDMI Connect audio from TV and other devices COO O oo Use your SoundBar Adjust the volume Choose your sound MP3 player Play music via Bluetooth Auto standby Apply factory settings w w w u ss A gt Wall mount your SoundBar Wall mount Product specifications Troubleshooting Notice Notice of compliance EN English 1 Important Read and understand all instructions before you use your product If damage is caused by failure to follow instructions the warranty does not apply Important safety instructions e Read these instructions e Keep these instructions e Heedall warnings e Follow all instructions Do not use this apparatus near water e Clean only with dry cloth Do not block any ventilation openings Install in accordance with the manufacture
8. device or other devices nearby that operate in the same frequency e If you want to connect your SoundBar with another Bluetooth device disable the currently connected Bluetooth device Auto standby When playing media from a connected device the SoundBar automatically switches to standby if no source button is pressed for 30 minutes and e no audio video playback is detected from a connected device Apply factory settings You can reset your SoundBar to the default settings programmed at the factory 1 In AUX mode press and hold NIGHT MODE OFF for 5 seconds L gt When the factory settings restore is complete the SoundBar automatically switches off and restarts EN 13 English 5 Wall mount your SoundBar Before you mount your SoundBar on the wall read all safety precautions Wall mount unit before wal damage If you in your country Secure the wal the rubber fee You must detach the surround speakers from the main mounting or un mounting Improper wall mounting may result in accident injury or ave any query contact Consumer Care mount to a wall that can support the combined weight of the product and the wall mount Before wall mount you need not remove the four rubber feet at the bottom of the soundbar otherwise cannot be fixed back Depend on the Screw length diameter type of wall mounting this wall mount bracket make sure that you u
9. in relation to the product with which this booklet was packaged Philips and the Philips Shield Emblem are registered trademarks of Koninklijke Philips N V HTL7180_F7_UM_V2 0
10. liquids such as vases should not be placed on this apparatus CAUTION To prevent electric shock match wide blade of plug to wide slot fully insert Care for your product Use only microfiber cloth to clean the product Care of the environment ab Your product is designed and manufactured with high quality materials and components which can be recycled and reused Please visit www recycle philips com for additional information on a recycling center in your area Never dispose of your product with other household waste Please inform yourself about the local rules on the separate collection of EN 3 English electrical and electronic products and batteries The correct disposal of these products helps prevent potentially negative consequences on the environment and human health The batteries supplied do not contain the heavy metals mercury and cadmium Nevertheless in many areas batteries may not be disposed of with your household waste Please ensure you dispose of batteries according to local regulations For perchlorate material special handling may apply Visit www dtsc ca gov hazardouswaste perchlorate Caution e Removal of the built in battery invalidates the warranty and can destroy the product Always bring your product to a professional to remove the built in battery Help and support For extensive online support visit www philips com support to e downlo
11. or SPDIF OUT Option 2 Connect audio through a digital coaxial cable Good quality audio DIGITAL IN COAXIAL IN 1 Using a coaxial cable connect the COAXIAL connector on your SoundBar to the COAXIAL DIGITAL OUT connector on the TV or other device e The digital coaxial connector might be labeled DIGITAL AUDIO OUT Option 3 Connect audio through analog audio cables Basic quality audio 1 Using an analog cable connect the AUX connectors on your SoundBar to the AUDIO OUT connectors on the TV or other device AUX IN AUDIO IN 4 Use your SoundBar This section helps you use the SoundBar to play audio from connected devices Before you start e Make the necessary connections described in the quick start guide and the user manual e Switch the SoundBar to the correct source for other devices Adjust the volume 1 Press Volume to increase or decrease a volume level e To mute sound press amp Mute e To restore the sound press amp Mute again or press Volume Volume indicator When you change volume one or multiple Volume indicator up to 8 indicators on the main unit light up to indicate a volume level The more indicators light up the higher the volume level is HDMI OPTICAL ARC 1 HDMI 2 COAX AUX AUDIO IN Bluetooth V SURR O O O O O O O O e If you do not press the volume key for five seconds the volume indicators light of
12. CAUTION To prevent battery leakage which may result in bodily injury property damage or damage to the unit e Install all batteries correctly and as marked on the unit Do not mix batteries old and new or carbon and alkaline etc e Remove batteries when the unit is not used for a long time The batteries shall not be exposed to excessive heat such as sunshine fire or the like e Perchlorate Material special handling may apply See www dtsc ca gov hazardouswaste perchlorate The product remote control may contain a coin button type battery which can be swallowed Keep the battery out of reach of children at all times If swallowed the battery can cause serious injury or death Severe internal burns can occur within two hours of ingestion e If you suspect that a battery has been swallowed or placed inside any part of the body seek immediate medical attention e When you change the batteries always keep all new and used batteries out of reach of children Ensure that the battery compartment is completely secure after you replace the battery e Ifthe battery compartment cannot be completely secured discontinue use of the product Keep out of reach of children and contact the manufacturer e Apparatus shall not be exposed to dripping or splashing Do not place any sources of danger on the apparatus for example liquid filled objects lighted candles e This apparatus may cont
13. For product support visit Para obtener asistencia t cnica visite Pour en savoir plus sur l assistance sur les produits visitez le site www hd philips com HTL7180 User manual 1 Manuel d utilisation 39 Manual del usuario 19 EN For further assistance call the customer support service in your country To obtain assistance in the U S A Canada Puerto Rico or the U S Virgin Islands contact Philips Customer Care Center at 1 866 310 0744 To obtain assistance in Mexico contact Philips Customer Care Center at 01 800 839 1989 exico city 5887 9736 Para obtener mas informacion llame al servicio de soporte al cliente de su pais ara obtener asistencia en los Estados Unidos en Canada Puerto Rico o en las Islas Virgenes de los Estados Unidos comuniquese con Centro de atencion al cliente de Philips al 1 866 310 0744 Solo para Mexico CENTRO DE ATENCION A CLIENTES LADA 01 800 839 1989 Solo Para Mexico exico city 5887 9736 FR Pour obtenir de l aide supplementaire communiquez avec le centre de service a la clientele de votre pays e Pour obtenir de l aide aux Etats Unis au Canada a Puerto Rico ou aux Iles Vierges americaines communiquez avec le centre de service a la clientele Philips au 1 866 310 0744 e Pour obtenir l aide au Mexique entrez en contact avec le centre de soin de client de Philips a 01 800 839 1989 exico city 5887 9736 For Product recycling information please visit www recycle philips com
14. HDMI ARC e Lights up when you select HDMI ARC as the input source e Blinks when no audio from the selected HDMI ARC source is detected or when an unsupported audio format is detected G HDMI 1 Lights up when you select HDMI IN 1 as Remote control the input source O HDMI 2 This section includes an overview of the remote control Lights up when you select HDMI IN 2 as the input source 5 OPTICAL COAX e Lights up when you switch to optical or coaxial input source e Blinks when an unsupported audio format is detected 6 AUX Lights up when you switch to AUX input source T AUDIO IN as sites Lights up when you switch to AUDIO IN source 3 5mm jack Bluetooth e Lights up when you switch to Bluetooth mode and Bluetooth devices are paired e Blinks when you switch to Bluetooth mode and Bluetooth devices are not paired 9 V SURR indicator e Lights up when surround mode is selected Off when stereo mode is selected PHILIPS Blinks once when night mode auto volume is enabled e Blinks twice when Dolby Digital audio is input Standby On Blinks twice when night mode auto e Switch the SoundBar on or to standby volume is disabled e When EasyLink is enabled press Blinks three times when DTS audio is and hold for at least three seconds input to switch all connected HDMI CEC compliant devices to standby
15. I DVI adapter to connect to TV However some of the features may not be available e video is automatically displayed on your TV and e audio is automatically played on your SoundBar 1 Using a High Speed HDMI cable connect the HDMI OUT connector on your digital device to the HDMI IN 1 2 on your SoundBar 2 Connect your SoundBar to TV through HDMI OUT ARC e Ifthe TV is not HDMI CEC compliant select the correct video input on your TV 3 On the connected device turn on HDMI CEC operations For details see the user manual of the device Connect audio from TV and other devices Play audio from TV or other devices through your Soundbar speakers Use the best quality connection available on your TV Soundbar and other devices Note e When your Soundbar and TV are connected through HDMI ARC an audio connection is not required Connect digital devices through HDMI Connect a digital device such as a set top box DVD Blu ray player or games console to your SoundBar through a single HDMI connection When you connect the devices in this way and play a file or game the 10 EN Option 1 Connect audio through a digital optical cable Best quality audio DIGITAL IN OPTICAL 1 Using an optical cable connect the OPTICAL connector on your SoundBar to the OPTICAL OUT connector on the TV or other device e The digital optical connector might be labeled SPDIF
16. ad the user manual and the quick start guide e watch video tutorials available only for selected models e find answers to frequently answered questions FAQs e email us a question e chat with our support representative Follow the instructions on the website to select your language and then enter your product model number Alternatively you can contact Consumer Care in your country Before you contact note down the model number and serial number of your product You can find this information on the back or bottom of your product 2 Your SoundBar Congratulations on your purchase and welcome to Philips To fully benefit from the support that Philips offers register your SoundBar at www philips com welcome Indicators on the main unit This section describes the information of the LED indicators on the main unit 7 e is 1 HDMI OPTICAL 1 i ARC 1 HDMI 2 COAX AUX AUDIO IN Bluetooth V SURR me o o O o i doo bobos O Volume indicator e When you change volume one or multiple indicators up to eight indicators light up to indicate the volume level Wireless pairing indicators During wireless pairing between the main unit and the surround speakers elght indicators blink one by one e When the pairing succeeds eight indicators light up for three seconds e If the pairing fails eight indicators blink hree times 2
17. ain lead and mercury Dispose according to local State or Federal laws For disposal or recycling information please contact your local authorities For additional assistance on recycling options please contact www mygreenelectronics com or www elae org or www recycle philips com e Where the MAINS plug or an appliance coupler is used as the disconnect device the disconnect device shall remain readily operable Do not place this apparatus on the furniture that is capable of being tilted by a child and an adult leaning pulling standing or climbing on it A falling apparatus can cause serious injury or even death e This apparatus should not be placed in a built in installation such as a bookcase or rack unless proper ventilation is provided Make sure to leave a space of 7 8 inches 20cm or more around this apparatus Class II equipment symbol This symbol indicates that the unit has a double insulation system This bolt of lightning indicates uninsulated material within your unit may cause an electrical shock For the safety of everyone in your household please do not remove product covering The exclamation point calls attention to features for which you should read the enclosed iterature closely to prevent operating and maintenance problems WARNING To reduce the risk of fire or electric shock this apparatus should not be exposed to rain or moisture and objects filled with
18. d no signature verification receipt can be provided Failure to operate per Owner s Manual TO OBTAIN ASSISTANCE IN THE U S A CANADA PUERTO RICO OR U S VIRGIN ISLANDS Contact Customer Care Center at 1 866 310 0744 REPAIR OR REPLACEMENT AS PROVIDED UNDER THIS WARRANTY IS THE EXCLUSIVE REMEDY FOR THE CON SUMER PHILIPS SHALL NOT BE LIABLE FOR ANY INCIDEN TAL OR CONSEQUENTIAL DAMAGES FOR BREACH OF ANY EXPRESS OR IMPLIED WARRANTY ON THIS PROD UCT EXCEPT TO THE EXTENT PROHIBITED BY APPLICABLE LAW ANY IMPLIED WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE ON THIS PRODUCT IS LIMITED IN DURATION TO THE DURATION OF THIS WARRANTY Some states do not allow the exclusions or limitation of inciden tal or consequential damages or allow limitations on how long an implied warranty lasts so the above limitations or exclusions may not apply to you This warranty gives you specific legal rights You may have other rights which vary from state province to state province P amp F USA Inc PO Box 2248 Alpharetta GA 30023 2248 18 P amp F USA Inc PO Box 2248 Alpharetta GA 30023 2248 PHILIPS Specifications are subject to change without notice 2013 WOOX Innovations Limited All rights reserved This product was brought to the market by WOOX Innovations Limited or one of its affiliates further referred to in this document as WOOX Innovations and is the manufacturer of the product P amp F is the warrantor
19. device connects and disconnects constantly e The Bluetooth reception is poor Move the device closer to the SoundBar or remove any obstacle between the device and the SoundBar e Turn off Wi Fi function on the Bluetooth device to avoid interference e For some Bluetooth the Bluetooth connection can be deactivated automatically to save power This does not indicate any malfunction of the SoundBar 16 EN 8 Notice This section contains the legal and trademark notices Notice of compliance This set complies with the FCC rules Part 15 Operation is subject to the following two conditions O This device may not cause harmful interference and O This device must accept any interference received including interference that may cause undesired operation FCC rules This equipment has been tested and found to comply with the limits for a Class B digital device pursuant to part 15 of the FCC Rules These limits are designed to provide reasonable protection against harmful interference in a residential installation This equipment generates uses and can radiate radio frequency energy and if not installed and used in accordance with the instruction manual may cause harmful nterference to radio communications However there is no guarantee that in n n w erference will not occur in a particular installation If this equipment does cause harmful erference to radio or television reception hic
20. epeat the steps above 5 Repeat the steps above to pair up the other surround speaker with the main unit Pair up with the subwoofer 1 Turn on the SoundBar and the subwoofer gt Ifthe connection to the SoundBar is lost the indicator on the subwoofer blinks white slowly 2 Press the CONNECT button on the subwoofer to enter the pairing mode Ly The indicator on the subwoofer blinks white quickly 3 On the remote control press AUX and then press TREBLE BASS and Volume within three seconds L gt Ifthe pairing succeeds the indicator on the subwoofer lights up white gt Ifthe pairing fails the indicator on the subwoofer blinks white slowly 4 ifthe pairing fails repeat the steps above Place speakers For best sound effect position all the speakers owards the seating position and place them close to your ear level seated Surround sound depends on factors such as room shape and size type of wall and ceiling windows and reflective surfaces and speaker acoustics Experiment with the speaker positions to find the optimum setting for you Follow these general guidelines for speakers placement 1 Seating position This is the center of your listening area 2 Place the SoundBar in front of the seating position 3 REARL rear left and REAR R rear right surround speakers Place the rear surround spea
21. f and the current source indicator and the sound mode indicator light up Choose your sound This section helps you choose the ideal sound for your video or music EN 11 English Surround sound mode Experience an immersive audio experience with surround sound modes 1 Press VSURR to select a surround mode Surround Creates a surround listening experience The V SURR indicator on the main unit lights up e Stereo lwo channel stereo sound Ideal for listening to music Note When the surround speakers are undocked from the main unit it is fixed to surround mode only Equalizer Change the high frequency treble and low frequency bass settings of the SoundBar 1 Press TREBLE or BASS to change the frequency Treble bass indicator e When you change frequency levels one or multiple indicator up to 8 indicators on the main unit light up to indicate a frequency level The more indicators light up the more the treble or bass is 4 4 HDMI OPTICAL ARC 1 HDMI 2 COAX AUX AUDIO IN Buetooth V SURR O O O O O O O O Auto volume Turn the auto volume on to keep the volume constant when you switch to a different source It also compresses the sound dynamics increasing the volume for quiet scenes and decreasing the volume for loud scenes 1 Press AUTOVOLUME ON OFF to turn auto volume on or off Ly When auto volume is turned on the V SURR indicator blinks once
22. h can be determined by turning the equipment off and on the user is encouraged o try to correct the interference by one or more of the following measures e Relocate the receiving antenna e Increase the separation between equipment and receiver Connect the equipment into an outlet on a circuit different from that to which the receiver is connected Consult the dealer or an experienced radio TV technician for help FCC Radiation Exposure Statement his equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment This equipment should be installed and operated with a minimum distance of 20cm between the radiator and your body This transmitter must not be co located or operated in conjunction with any other antenna or transmitter Warning Changes or modifications made to this equipment not expressly approved by WOOX Innovations may void the FCC authorization to operate this equipment Model number PHILIPS HTL7180 F7 Trade Name Philips Responsible Party P amp F USA Inc PO Box 2248 Alpharetta GA 30023 2248 1 866 310 0744 Canada This device complies with Industry Canada licence exempt RSS standard s Operation is subject to the following Two conditions 1 this device may not cause harmful interference and 2 this device must accept any interference received including interference that may cause undesired operation This Class B digital apparatus complies with Ca
23. kers to the eft and right side of your seating position either in line with it or slightly behind it 4 SUBWOOFER subwoofer Place the subwoofer at least one meter o the left or right of the TV Leave about 10 centimeter clearance from the wall Dock the surround speakers You can also dock your surround speakers onto he main unit to listen to audio for example watching TV shows and news 4 Ep J 4 E Connect to TV Connect your SoundBar to a TV You can listen to audio from TV programs through your SoundBar Use the best quality connection available on your SoundBar and TV EN 9 English Connect to TV through HDMI ARC Your SoundBar supports HDMI with Audio Return Channel ARC If your TV is HDMI ARC compliant you can hear the TV audio through your SoundBar by using a single HDMI cable HDMI OUT ARC 1 Using a High Speed HDMI cable connect the HDMI OUT ARC connector on your SoundBar to the HDMI ARC connector on the TV e The HDMI ARC connector on the TV might be labeled differently For details see the TV user manual 2 On your TV turn on HDMI CEC operations For details see the TV user manual Note IfyourTV is not HDMI ARC compliant connect an audio cable to hear the TV audio through your SoundBar see Connect audio from TV and other devices on page 10 IfyourTV has a DVI connector you can use an HDM
24. luetooth device such as an iPad iPhone iPod touch Android phone or laptop and then you can listen to the audio files stored on the device through your SoundBar speakers What you need e A Bluetooth device which supports Bluetooth profile A2DP and with Bluetooth version as 2 1 EDR e The operational range between the SoundBar and a Bluetooth device is approximately 10 meters 30 feet 1 Press Bluetooth on the remote control to switch the SoundBar to Bluetooth mode L gt The Bluetooth indicator blinks 2 On the Bluetooth device switch on Bluetooth search for and select Philips HTL7180 to start connection see the user manual of the Bluetooth device on how to enable Bluetooth L gt During connection the indicator blinks 3 Wait until you hear a beep sound from the SoundBar L gt The Bluetooth indicator lights up L fthe connection fails the Bluetooth indicator blinks continually 4 Select and play audio files or music on your Bluetooth device During play if a call is coming music play is paused Play resumes when the call ends e If music streaming is interrupted place the Bluetooth device closer to the Soundbar 5 To exit Bluetooth select other source e When your switch back to Bluetooth mode Bluetooth connection remains active Note The music streaming may be interrupted by obstacles between the device and SoundBar such as wall metallic casing that covers the
25. nadian ICES 003 EN 17 English ONE 1 YEAR LIMITED WARRANTY WARRANTY COVERAGE This warranty obligation is limited to the terms set forth below WHO IS COVERED This product is warranted to the original purchaser or the per son receiving the product as a gift against defects in materials and workmanship as based on the date of original purchase Warranty Period from an Authorized Dealer The original sales receipt showing the product name and the purchase date from an authorized retailer is considered such proof WHAT IS COVERED This warranty covers new products if a defect in material or workmanship occurs and a valid claim is received within the Warranty Period At its option the company will either 1 repair the product at no charge using new or refurbished replacement parts or 2 exchange the product with a product that is new or which has been manufactured from new or ser viceable used parts and is at least functionally equivalent or most comparable to the original product in current inventory or 3 refund the original purchase price of the product The company warrants replacement products or parts provided under this warranty against defects in materials and workmanship from the date of the replacement or repair for ninety 90 days or for the remaining portion of the original product s warranty whichever provides longer coverage for you When a product or part is exchanged any replacement i
26. r s instructions e Do not install near any heat sources such as radiators heat registers stoves or other apparatus including amplifiers that produce heat e ES Do not defeat the safety purpose of he polarized or grounding type plug A polarized plug has two blades with one wider than the other A grounding type plug has two blades and a third grounding prong The wide blade or the third prong are provided for your safety If the provided plug does not fit into your outlet consult an electrician for replacement of the obsolete outlet e Protect the power cord from being walked on or pinched particularly at plugs convenience receptacles and the point where they exit from the apparatus e Only use attachments accessories specified by the manufacturer Use only with the cart stand tripod bracket or table specified by the manufacturer or sold with the apparatus When a cart is used use caution when moving the cart apparatus combination to avoid injury from tip over Unplug this apparatus during lightning storm or when unused for long periods of time Refer all servicing to qualified service personnel Servicing is required when the apparatus has been damaged in any way such as power supply cord or plug is damaged liquid has been spilled or objects have fallen into the apparatus the apparatus has been exposed to rain or moisture does not operate normally or has been dropped Battery usage
27. se screws of a suitable length and diameter 3 3 5mm gt 25mm For information about how to wall your SoundBar see the wall mount guide 14 EN 6 Product specifications Note e Specifications and design are subject to change without notice Amplifier e FTC total output power 66W Front Left Right 16W 1 THD 80hm 150 Hz 20 kHz Surround Left Right 20W 1 THD 80hm 150 Hz 20 kHz Subwoofer 30W 1 THD 4ohm 30 Hz 140 Hz e Total output power e 210W RMS 0 5 dB 30 THD e 168W RMS 0 5 dB 10 THD e Frequency response 20 Hz 20 kHz 3 dB Signal to noise ratio gt 65 dB CCIR A weighted e Input sensitivity AUX 400 mV e AUDIO IN 200 mV FTC output power is measured in bypass mode To enter bypass mode in AUX mode press and hold AUTO VOLUME OFF for 5 seconds To exit bypass mode turn off the unit and switch it on again Audio e S PDIF Digital audio input Coaxial IEC 60958 3 Optical TOSLINK Bluetooth e Bluetooth profiles A2DP Bluetooth version 2 1 EDR Main unit e Power supply 120 V 60 Hz e Power consumption 50 W Standby power consumption lt 0 5 W Speaker impedance Woofer 8 ohm e tweeter 8 ohm Speaker drivers 2 x 63 5 mm 2 5 woofer 2 x 25 4 mm
28. speakers 2 Turn on the main unit L gt During charging the indicator on the speaker lights up amber L gt When fully charged the indicator on the speaker lights up white for 30 seconds 8 EN Note It may take around 2 hours to fully charge the speakers Ifthe charging lasts more than 4 hours during standby of the main unit the speakers automatically switch to standby Pair up with speakers subwoofer The wireless speakers and subwoofer automatically pair up with the SoundBar for wireless connection when you turn on the SoundBar the speakers and the subwoofer If no audio from the wireless speakers and subwoofer can be heard manually pair up the speakers and the subwoofer Pair up with the speakers 1 Turn on the SoundBar and the surround speaker L gt Ifthe connection to the SoundBar is lost the indicator on the speaker blinks red slowly 2 Press the Connection key on the speaker with a pin to enter the pairing mode L gt The indicator on the speaker blinks red quickly 3 On the remote control press AUX and then press TREBLE BASS and Volume within three seconds L Ifthe pairing succeeds the indicator on he speaker lights up white undocked from the main unit or the indicator on the speaker lights up white for 30 seconds being docked into the main unit L gt Ifthe pairing fails the indicator on the speaker blinks red slowly 4 ifthe pairing fails r
29. tem becomes your property and the replaced item becomes the company property When a refund is given your product becomes the company property Note Any product sold and identified as refurbished or renewed carries a ninety 90 day limited warranty Replacement product can only be sent if all warranty requirements are met Failure to follow all requirements can result in delay WHAT IS NOT COVERED EXCLUSIONS AND LIMI TATIONS This Limited Warranty applies only to the new products that can be identified by the trademark trade name or logo affixed to it This Limited Warranty does not apply to any non Philips hardware product or any software even if packaged or sold with the product Non Philips manufacturers suppliers or publishers may provide a separate warranty for their own products packaged with the bundled product The company is not liable for any damage to or loss of any programs data or other information stored on any media contained within the product or any non Philips product or part not covered by this warranty Recovery or reinstallation of programs data or other information is not covered under this Limited Warranty This warranty does not apply a to damage caused by accident abuse misuse neglect misapplication or non Philips product b to damage caused by service performed by anyone other than an Authorized Service Location c to a product or a part that has been modified without written permission
30. utomatically goes to standby Wireless subwoofer The SoundBar comes with a wireless subwoofer CONNECT Or O Cy 7 AC MAINS CONNECT Press to to enter the pairing mode for the subwoofer Subwoofer indicator e When the power is turned on the indicator lights up During wireless pairing between the subwoofer and the main unit the indicator blinks white quickly When the pairing succeeds the indicator lights up white When the pairing fails the indicator blinks white slowly G AC MAINS Connect to the power supply EN 7 English 3 Connect and set up This section helps you connect your SoundBar to a TV and other devices and then set it up For information about the basic connections of your SoundBar and accessories see the quick start guide Note e For identification and supply ratings see the type plate at the back or bottom of the product Before you make or change any connections make sure that all devices are disconnected from the power outlet Charge speakers If the wireless surround speaker is undocked from the main unit its battery level is indicated by the indicator on the speaker e Light up white full battery e Light up red low battery level less than 30 remaining e Flash red near empty less than 10 remaining 1 Dock your speakers onto the main unit to charge the
Download Pdf Manuals
Related Search