Philips FWV595 User's Manual
Contents
1. Locicrare peck me NOOO IMPORTANT To change the playback mode Before playing a tape check and tighten Press AUTO REPLAY repeatedly to select the slack tape with a pencil Slack tape may get different playback modes jammed or may burst in the mechanism e AUTO REPLAY or ONCE will C 120 tape is extremely thin and is easily appear on the display deformed or damaged It is not recommended for use in this system Store the tapes at room temperature and do not put them too close to a magnetic field for example a transformer TV or speaker AUTO REPLAY the tape will rewind automatically at the end of playback and replay again It will replay up to a maximum of 20 times or until you press W ONCE ss the tape will playback the selected side once and then stop Tape Playback Press to open the tape To rewind or fast forward when playback is stopped Press 44 or DP Press W when you reached the desired passage deck door nsert a recorded tape and close the tape door Load the tape with the open side down and the full spool To reset tape counter number o the left When in stop mode press Ml Press TAPE TAPE 1 2 repeatedly to select T1 GOO or Te BO will be displayed ape deck 1 or tape deck 2 gt The selected tape deck number is displayed Notes Press PLAY DIE to start playback The tape counter will automatically set to zero after detecting end of tape2. D un n ott ini M PHILIPS Optimum disc playability ensuring excellent picture quality Philips components and modules for the various CD applications have always enjoyed an excellent reputation in the market place for super disc playability the ability to play discs which may be scratched soiled or not fully according to the standard specification This position has been underlined by tests showing the superior performance of the various Philips players as well as by the positive experiences of millions of individual consumers around the world Constantly improving performance As the penetration of the CD system has increased and new applications like CD ROM and Video CD have become commonplace Philips Components as the CD technology inventor and as one of the major suppliers of CD player modules in the industry has constantly improved the performance of its products One of the ways in which this benefits users is by optimum disc playability This is an important parameter for CD players other than CD Audio and especially for the Video CD applications because any loss of data from the disc will at best cause disturbances in the reproduced picture and at worst can cause the player to lose rack so that disc playing fails EriCo Presenting Super Error Correction To ensure consistently good results when playing Video CD discs of all quality grades and conditions Philips
3. the current selected disc tray is loaded or playing To play all discs on the disc tray Press PLAY PIL gt All the available discs will play once then stop gt During playback the selected disc tray track number and elapsed playing time of the current track will appear on the display To start playback from a selected disc tray Press DISC 1 DISC 2 or DISC 3 To interrupt playback Press PAUSE gt II To resume playback press PLAY BIT again To stop playback Press Ml Replace discs during playback Press DISC CHANGE gt OPEN will be displayed To change the inner disc press DISC CHANGE again gt The active disc will stop playing and the disc tray will close to retrieve the inner disc then reopen with the inner disc accessible 17 CD VCD MP3 CD Operation 18 Select a desired track passage To search for a particular passage during playback Press lt 4 or PP to select 4 different search speed gt FRX1 FRX2 FRX3 or FRX4 will be displayed on the TV screen when you select a fast rewind search gt FFX1 FFX2 FFX3 or FFX4 will be displayed on the TV screen when you select a fast forward search gt Normal playback will begin at the end of the fast rewinding or forwarding of the selected rack Play returns to normal when PLAY BIT is pressed or when a new track is selected To select a desired track Press M or Pl repeatedly or Digits 0 9 on h
4. To stop playback Press Ml 25 Tape Operation Recording 26 General Information on Recording If you do not intend to record via the microphone unplug the microphone to avoid accidental mixing with other recording source For recording use only tape of IEC type normal tape The recording level is set automatically regardless of the position of the Volume VAC DSC and so forth The tape is secured at both ends with leader tape At the beginning and end of the tape nothing will be recorded for six to seven seconds To prevent accidental recording break out the tab on the left shoulder of the tape side you want to protect If CHECK THRE is displayed the protection tab has been broken Put a piece of clear adhesive tape over the opening emo fasten IMPORTANT Recording is permissible if copyright or other rights of third parties are not infringed upon Recording is possible only on tape deck 2 wn Preparation for Recording Press TAPE TAPE 1 2 to select TAPE 2 Load a recordable tape into tape deck 2 with full spool to the left Prepare the source to be recorded VCD load the disc s TUNER tune to the desired radio station TAPE load the prerecorded tape into tape deck 1 with the full spool to the left AUX connect external equipment When recording is in progress gt starts flashing It is not possibl
5. FW VCD MINI HIFI SYSTEM Ezsasoun 1 7 7N CONTROL DAC MAX BASS DYNAMIC AMPLIFICATION TT voume osp QO _ VCD123 AUX TUNER TAPE 1 2 MP3 123 6 6660 S YN DO eee x C TITLE Storing Preset Radio Stations You can store up to 40 preset radio stations in he memory Automatic Preset Programming Plug and Play setting refer to Basic Functions Plug and Play OR 1 Press TUNER BAND to select TUNER mode gt TUNER will be displayed A few seconds he display f an FM station is received in stereo will appear on the display To begin automatic preset from a desired 3 preset number Press or Pl to select the desired preset number If a radio station has been stored in one of the presets it will not be stored again under 2 Press and hold PROG until AUTO appears on the display gt PROG will start flashing stations on the FM band then the MW band gt All available radio stations with strong signal strength will be stored automatically gt The system will stop searching when all the available radio stations are stored or when the memory for 40 preset radio stations is used gt The last preset radio station will then be played when completed ater the current radio frequency will appear on 2 another preset number gt The system w
6. MP3 123 RS A y 1 1 e max CONTROL DAC ae KEP BASS DYNAMIC AMPLIFICATION Wa 1 o NT IN Ae NUE LOL i0 jeeee eee Q K y EN mae 7 ALBUM DSC vac ALBUM LF Au YD PBC RETURN DIGEST AB OOOO zoom RESUME stow VOCAL Z 29 IMPORTANT This system is designed for regular discs Therefore do not use any accessories such as disc stabiliser rings or disc treatment sheets etc as offered on the market because they may jam the disc mechanism Do not load more than one disc into the tray Before viewing the Video CD ensure that the set is switched to corresponding PAL or NTSC system of your TV set exception Multi system TV Discs for Playback This system can playback all digital audio CD video CD MP3 CD format discs finalised digital audio CD Recordable CDR discs and finalised digital audio CD Rewritable CDRW discs cise cie ise cise USE EC DIGITAL AUDIO DIGITAL AUDIO Se ReWritable Support following MP3 CD formats 1509660 format Max Title Album name 30 characters Max Title number plus Album is 255 Max nested directory is 8 levels The max Album number is 32 The max MP3 programme track number is 99 Supported VBR bit rate Supported sampling frequencies for MP3 disc 32 kHz 44 1 kHz 48 kHz Supported Bit rates of MP3 disc
7. Adjusting the TV System Before viewing the Video CD ensure that the set is switched to corresponding PAL or NTSC system of your TV set except Multi system TV Press and hold PAL NTSC for more than 2 seconds to D0 128 N switch between PAL or NTSC G O TV system YY D AS gt After TV system is selected peN A the set will automatically switch to the last TV system setting every time the VCD source is selected Note Before adjusting the TV system make sure that there is no MP3 CD in disc tray 1 during power up OSD On Screen Display f you insert VCD your TV screen will serve as an additional display for messages e g PLAY STOP and information stored on the VCD Press OSD on the remote control repeatedly to switch on or off the On Screen Display When OSD is switched ON you can see the following display on the TV screen Below is an example of the OSD message SINGLE ELAPSED PLAY XX TT MM SS XX is the current track TT is the total tracks MM is in minutes SS is in seconds Note You can also view the information from a MP3 CD or normal CD Playing aVideo CD with PBC VCD with PBC Playback Control will be indicated on the display of the set as soon as they are inserted PBC is a predefined play sequence stored on the VCD Switch on the TV insert aVCD with PBC and press PLAY P Ill to start playback MENU appears on the TV screen If the
8. gt The clock will be displayed for a few seconds f the clock has not been set will be displayed Clock Setting The clock can be set in either 12 hour or 24 hour mode AM 2 00 or UO 00 for example Press CLOCKeTIMER twice 2 Press PROG on the system repeatedly to select clock mode gt If 12 hour mode is selected AM 12 0 will start flashing gt If 24 hour mode is selected 00 500 will start flashing 3 Press or PP on the system repeatedly to set the hour 4 Press M or Pl on the system repeatedly to set the minute 5 Press CLOCK TIMER again to store the setting gt The clock will start working To exit without storing the setting Press Mon the system 28 ALBUM 7 lan z Notes The clock setting will be cancelled when the power cord is disconnected or if a power failure occurs During clock setting if no button is pressed within 90 seconds the system will exit clock setting mode automatically Timer Setting The system can switch on to VCD TUNER or TAPE 2 mode automatically at a preset time serving as an alarm to wake you up IMPORTANT Before setting the timer ensure that the clock is set correctly The timer will always be switched on after it has been set The timer will not start if a recording is in progress The volume of the timer will increase gradually from the minimum level to the last tuned volume leve
9. see Maintenance Use only NORMAL IEC I tape Apply a piece of adhesive tape over the missing tab space The tape deck door cannot open Remove and reconnect the AC power plug and switch on the system again GENERAL The system does not react when buttons are pressed Remove and reconnect the AC power plug and switch on the system again Sound cannot be heard or is of poor quality Adjust the volume Disconnect the headphones Check that the speakers are connected correctly Check if the stripped speaker wire is clamped Make sure the MP3 CD was recorded within 32 256 kbps bit rate with sampling frequencies at 48 kHz 44 1 kHz or 32 kHz The left and right sound outputs are reversed Check the speaker connections and location The remote control does not function properly Select the source VCD or TUNER for example before pressing the function button D K4 Pl Reduce the distance between the remote control and the system nsert the batteries with their polarities signs aligned as indicated Replace the batteries Point the remote control directly toward R sensor on the front of the system The timer is not working Set the clock correctly f a recording is in progress stop the recording Not all lighted buttons are showing light Press DISPLAY to select NORMAL or MODE 1 display mode The Clock Timer setting is erased Power has been interrupted
10. CD to stop playback or to clear a programme for TUNER on the system only to stop programming bichon hae es on the system only to delete he preset radio station for TAPE uses o stop playback or recording nant o reset tape counter number for DEMO ns on the system only to activate deactivate the demonstration for CLOCK on the system only to exit clock setting or cancel timer for PLUG amp PLAY on the system only to exit plug amp play mode PREV PRESET NEXT I gt l TITLE for MP3 CD only to select previous next Title for VCD only to move the zoomed picture down or up o select next or previous ENU orVCD track during playback for VCD with PBC switched on for CD VCD to skip to the previous or next rack for TUNER to select a preset radio station for CLOCK on the system only to set the minute Q o connect headphones VCD Operation for VCD version 2 0 only PBC PLAYBACK CONTROL o switch on or off PBC mode RETURN G o return to the previous MENU level during playback for VCD with PBC switched on TITLE ALBUM NAME o display the title or album name for P3 CD DISPLAY o select different screen display mode ORMAL MODE 1 MODE 2 or MODE 3 PROG for CD VCD MP3 CD to programme disc tracks for TUNER to programme preset radio stations for CLOCK on the system only to
11. Press M or Pl to view the previous or next page for additional information Press digit 3 on the remote control to select DIGEST TRACK gt The first track of the selected disc will be divided into 9 parts and displayed on the TV screen gt Press digit 0 9 on the remote control to playback the desired parts gt Press M or Pl to digest the next track To exit DIGEST mode press digit 4 on the remote control to select EXIT DIGEST MENU BB UW e amp A B Repeat This feature is also applicable to audio CD except for MP3 CD To play a certain scene or passage of the disc repeatedly Press A B on the remote control during playback to mark the sta or passage gt SET A appears on the display of the chosen scene Press A B again to mark the end of the chosen scene or passage SET P appears on the display The selected scene or passage is played repeatedly gt FLAY AE appears on the display Press A B once more to return to normal playback Un CLERR AE appears on the display Notes You can also cancel A B Repeat by pressing M or Pl You can only able to set the A B marking within the same track Once it crosses from one track to the next the A B marking is reset Zoom This feature enables you to view a still picture frame in an enlarge mode During playback press PAUSE PII to have a still picture on the TV screen gt The sound will be muted
12. from the power supply Repeat You can play the current track disc programme repeatedly during playback Press REPEAT on the remote control repeatedly to select various repeat modes In normal playback 2 REPEAT TRACK to repeat the current track REPEAT DISC to repeat the entire disc gt RPT appears on the display In programme playback e REPEAT TRACK to repeat the current programmed track REPEAT PROGRAM to repeat all programmed tracks gt RPT and PROG will appear on the display The current track disc programme will now be played repeatedly until you press Ml To resume normal playback press REPEAT until the REPEAT OFF mode is displayed gt RPT will disappear from the display Title Album Name This feature use to display the title and album name for MP3 CD Press TITLE ALBUM NAME repeatedly to display the title or album name gt TITLE will start flashing if title name is displayed gt ALB will start flashing if album name is displayed For Recording please refer to Tape Operation Recording 19 CD VCD MP3 CD Operation VIDEO CD 20 o FA lt 3 N Py gt x 4 2 G 4 gt N 0 O 0 CICR 3 8 POOE PQ A S A N e 3 F m a m o g Q lt lt SG fz gt e O Ne __ E gt x g LO
13. gt On TV screen PAUSE will be displayed Press ZOOM on the remote control once to enlarge the still picture by 2 times gt ZOOM appears on the TV screen You can move the zoomed picture left or right by pressing lt 4 or PP respectively You can move the zoom picture down or up by pressing K or Pl respectively Press ZOOM once more to return to normal still frame Press PLAY P Il to continue playback 21 CD VCD MP3 CD Operation 22 Resume This feature is also applicable to audio CD except for MP3 CD In stop mode press RESUME on the remote control to start playback again from where you have stopped Note Resume information is lost if you have changed the disc opened the disc tray change source or disconnected the system from the power supply Resume is not available when PBC mode is switched on Slow Press SLOW on the remote control to watch a VCD at a slower speed There are 3 types of slow modes to select gt The sound will be muted gt On TV screen SLOW 1 SLOW 2 or SLOW 3 will be displayed To resume playback at normal speed press PLAY gt II Vocal This feature allows you to fade out the original vocal from a karaoke VCD This feature is used together with Echo mode You can also use it to select the different audio modes Pressing WOCAL on the remote control repeatedly allows you to select the following modes STERED gt S
14. has introduced further improvements in the system s playability These developments together are called Super Error Correction a proprietary Philips technology optimizing the system s ability to handle less than perfect discs with the minimum disturbance to normal playing By effectively eliminating virtually all errors arising under normal playing conditions Super Error Correction ensures that the picture quality as seen by the user is independent of disc play The video encoding and processing during mastering of the disc and the MPEG 1 decoding and video encoding in the signal processing stages are now the only limiting factors for picture quality 3 DISC DIRECT PLAY DISC 1 DISC 2 O DISC 3 O EL CDICD R CD RW COMPATIBLE CD SYNCHRO RECORDING VCD MINI HIFI SYSTEM SHUFFC corp coea c03 rose TD D 9 O QOGOVO QOOW LOGIC TAPE DECK TAPEZ N REC PLAY DIGITAL SOUND CONTROL VIRTUAL AMBIENCE CONTROL DYNAMIC BASS BOOST DA Oo 000 0000 OO DEMO MODE To turn ON To turn OFF DEMO STOP DEMO STOP Press amp HOLD button Press amp HOLD it button for 5 seconds for 5 seconds PLUG amp PLAY 3 Follow instructions Press PLAY Plug in the unit in the display COMPACT SG
15. kg GENERAL Material finish ssesssssssssssssssssnes Polystyrene Metal AC Power 110 127 220 240V 50 60 Hz Switchable Power Rs Active Standby Dimensions w xh x d 265 x 310 x 390 mm Weight without speakers wis 75 kg Specifications and external appearance are subject to change without notice Cleaning the Cabinet Use a soft cloth slightly moistened with a mild detergent solution Do not use a solution containing alcohol spirits ammonia or abrasives Cleaning Discs When a disc becomes dirty a clean it with a cleaning cloth Wipe the disc from the centre out Do not wipe in circular motion N Do not use solvents such as benzine thinner commercially available cleaners or antistatic spray intended for analogue records Cleaning the disc lens After prolonged use dirt or dust may accumulate at the disc lens To ensure good playback quality clean the disc lens with Philips CD Lens Cleaner or any commercially available cleaner Follow the instructions supplied with cleaner WARNING Maintenance Cleaning the Heads and the Tape Paths To ensure good recording and playback quality clean the heads A the capstan s B and pressure roller s after every 50 hours of tape operation Use a cotton swab slightly moistened with cleaning fluid or alcohol You also can clean the heads by playing a cleaning tape once Demagnetising the heads Use a demagn
16. on the reverse side at the end of side A flip the tapes to side B and repeat the procedure To stop dubbing Microphone Mixing Connect a microphone not supplied to the system allowing you to sing along with the music source 1 Connect a microphone to the MIC jack Before connecting the microphone set the microphone LEVEL to the minimum level to prevent howling sound 2 Press VCD TUNER TAPE or AUX to select the source to be mixed and start playback Tape Operation Recording Notes Dubbing of tapes is possible only from tape deck 1 to tape deck 2 To ensure good dubbing use tapes of the same length You can listen to another source while dubbing Karaoke Adjust the volume level of the source with VOLUME control Adjust the microphone volume with microphone LEVEL control Note Keep the microphone away from the speakers to prevent howling For Recording please refer to Tape Operation Recording 27 Clock Timer FW VCD MINI HIFI SYSTEM STANDBY ON 1 CONTROL DAC MAX BASS DYNAMIC AMPLIFICATION _ _ VOLUME amp VCD123 AUX TUNER TAPE 1 2 O D O pui uw me a me A View Clock The clock if it is set will be shown in Standby mode To view the clock in any source mode VCD or TUNER for example Press CLOCK TIMER
17. select 12 or 24 hour clock mode 11 Controls 5 CLOCK gt TIMER to view the clock set the clock or set the timer OSD ON SCREEN DISPLAY to switch on or off the on screen display on the TV ZOOM o enlarge a still picture of the VCD on the TV screen RESUME o continue playback again from where you have stopped for VCD with PBC switched off KEY CONTROL b 4 o change the VCD key tone level to suit your 8 vocal range b to decrease the key tone level H to restore the key tone level to original setting Hem to increase the key tone level ECHO to adjust the VCD echo level for karaoke after inserted the microphone 6 SLOW gt to watch the VCD at a slower speed 6 VOCAL P to fade out the original vocal from a Karaoke VCD or to switch between mono or stereo mode during audio disc playback 63 A B to playback a certain scene or passage of a CD VCD repeatedly DIGEST to scan through a VCD or a specific track 5 REPEAT to playback track disc programme repeatedly DIGIT 0 9 numbers consisting more than two figures must be keyed in within 2 seconds to select a track number for CD VCD MP3 CD O to switch the system to Standby mode 12 Fw VCD MINI HIFI SYSTEM Basic Functions TT VOLUME IMPORTANT Before you operate the system complete the preparation procedu
18. 000 Hz 3 dB Input sensitivity AUX In CDR DVD In wees 500 mV 1V Microphones Let OV Output Speakers 26Q Headphones 32 Q 1000 Q 1 6 Q 1 kHz 10 THD DISC PLAYER umber of programmable tracks wees 99 Frequency response 20 20000 Hz Signal to noise ratio 2 76 dBA Channel separation 79 dB 1 kHz Total harmonic distortion lt 0 02 1 kHz ER VCD version 2 0 PEG 1 Layer 3 MP3 CD n s MPEG AUDIO P3 ED bitrate semis 32 256 kbps sampling frequencies 48 kHz 44 1 kHz 32 kHz TUNER FM wave range 87 5 108 MHz MW wave range 9 kHz 1602 kHz MW wave range 10 kHz 1700 kHz Tuning grid z Number of presets Antenna 75 Q wire Loop antenna TAPE PLAYER Frequency response Normal tape type 1 80 10000 Hz 8 dB Signal to noise ratio Normal tape type 1 248 dBA Wow and flutter lt 0 4 DIN SPEAKERS Front left right SYST ME a Impedance Woofer Tweeter Polydome Tweeter Dimensions w x h x d 240 x 310 x 290 mm Weights a nine 3 80 Kg each BOOSTER UNIT Material finish ose Polystyrene Metal Wood Output power 2 x 60 W AC Power sss 110 127 220 240V sada shuns ati GB 50 60 Hz Switchable Active 150W Standby 25W Dimensions w x h x d 140 x 310 x 345 mm Weight without speakers D
19. 4 Power Saving Automatic Standby 14 Clock Timer Display mode 14 View Clock 28 Volume Control 14 CIO Ek Setting sssrini eresie 28 Sound Navigation sssssssssssssssssssssssssssssssssssesssssesse 15 Timer Setting CD VCD MP3 CD Operation External Sources Discs for Playback sse 16 Listening to External Sources pe 29 Loading Discsi ccccsscsesseceiss anses 17 Disc Playback 17 Specifications s ss 1 111111111111111 30 Replace discs during playback 217 Select a desired track passage 18 x Programming the disc tracks ccc ccecccocccocccee 18 19 Maintenance 31 Repeat is sense tt ur 19 Title Album Name rs 19 Troubleshooting VIDEO CD Adjusting the TV System uu 20 OSD On Screen Display c cccsseesssesseesees 20 Playing a Video CD with PBC uu 20 RECU e p Ea RERO RR 21 IMPORTANT PLEASE NOTE THAT THE VOLTAGE SELECTOR LOCATED AT THE REAR OF THIS SYSTEM IS PRESET AT 220V FROM THE FACTORY FOR COUNTRIES THAT OPERATE AT 110V 127V PLEASE ADJUST TO 110V 127V BEFORE YOU SWITCH ON THE SYSTEM Environmental Information All unnecessary packaging has been omitted We have tried to make the packaging easy to separate into three materials cardboard box polystyrene foam buffer and polyethylene bags protective foam sheet Your system consists of materials which can be recycled and reused if disassembled by a specialised company Please observe the local
20. COMPACT DIGITAL AUDIO COMPACT DIGITAL AUDIO Recordable USE DIGITAL AUDIO ReWritable English BR oein ais aa Bahasa Melayu 61 Bahasa Indonesia 89 CAUTION Use of controls or adjustments or performance of procedures other than herein may result in hazardous radiation exposure or other unsafe operation Bahasa Melayu 6 E Contents General Information Environmental Information Supplied Accessories 7 Safety Information uo 7 Preparations Rear Connections ssssccsssesssesessseessseesssseeeses 8 9 Inserting batteries into the remote control 9 Controls Controls on the system and remote control oinin 10 12 Basic Functions Radio Reception Storing Preset Radio Stations 23 24 Tuning to Preset Radio Stations pp 24 Erasing a Preset Radio Station ee 24 Changing Tuning Grid sssssssssssssssssesssssssssssssssesse 24 Tape Operation Recording Tape Playback ss 25 General Information on Recording 26 Preparation for Recording uo 26 One Touch Recording Recording the mixed sound Plug and Play RE AE LME TE 13 Karaoke Demonstration mode 13 th Switching the SYSTEM ON nn 14 Microphone Mixing cesseessessessseessesssessseeese 27 Switching the system to Standby mode 1
21. TEREO VOCAL LEFT gt STEREO VOCAL RIGHT gt MONO LEFT MONG RIGHT STERED STEREO same effect as the original recorded disc STEREO VOCAL LEFT RIGHT fade out the original vocal for special recorded Karaoke disc only with the ECHO mode switched on MONO LEFT RIGHT select the language on a bilingual VCD Ensure that Echo mode is switched on when press VOCAL to fade out the original vocal during STEREO VOCAL LEFT RIGHT mode Key Control bh This feature allows you to change the key tone of your vocal range Press b on the remote control to decrease vocal key level gt KEY X and appears on the display Press on the remote control to increase vocal ey level gt KEY X amp appears on the display Press 4 on the remote control to restore vocal ey to original setting KEY FLAT appears on the display Note X denotes the key level Echo This feature allows you to add echo while singing or talking through a microphone Press ECHO on the remote control to decrease increase or switch off the echo effect e ECHO X or ECHO OFF appears on the display Notes X denotes the echo level You are advised to switch off the echo effect when not using the feature If microphone is not inserted INSERT MIC will be displayed Echo will switch off automatically when unplug the microphone from the system Radio Reception
22. are 32 64 96 28 192 256 kbps Following formats can t be supported The files like WMA AAC DLF M3U PLS Non English Album Title name The discs recorded under UDF format Note For mixed mode discs only one mode will be selected for playback depending on the recording format CD VCD MP3 CD Operation Loading Discs Press VCD to select CD VCD MP3 CD mode Press OPEN CLOSE to open the disc tray Load up to two discs on the individual disc trays To load the third disc press DISC CHANGE gt The disc tray will rotate until the empty tray is ready for loading Press OPEN CLOSE to close the disc tray RELATING DISL will be displayed The selected disc total number of tracks and the playing time will appear on the display A lighted button indicates that a disc is loaded on the disc tray For MP3 CD only Load a MP 3 CD format music disc on the disc tray gt The first album number and first title number AG TOO i will be displayed Notes Load the discs with the label side facing up To ensure good system performance wait until the disc tray completely reads the disc s before proceeding For MP3 CD the disc reading time may exceed 10 seconds due to the large number of songs compiled into one disc Disc Playback a CD1 adiscis loaded in the disc tray the current selected disc tray is empty CD1
23. ay if no button is pressed within 15 seconds the system will exit Plug and Play mode automatically Demonstration mode The system has a demonstration mode that shows the various features offered by the system To activate the demonstration In Standby mode press and hold DEMO STOP M on the system until TEMG GN is displayed gt The demonstration will begin To deactivate the demonstration Press and hold DEMO STOP M on the system until ZEMO OFF is displayed gt The system will switch to Standby mode Note Even if you remove the AC power cord and reconnect it to the wall socket the demonstration will remain off until you activate it again 13 Basic Functions Switching the system on In Standby Demonstration mode Press STANDBY ON gt The system will switch to the last selected source Press VCD TUNER TAPE AUX or VCD 123 MP3 123 TUNER TAPE 1 2 or AUX on the remote control gt The system will switch to the selected source Press any one of the DISC DIRECT PLAY buttons gt The system will switch to CD mode Switching the system to Standby mode In Demonstration mode Press and hold DEMO STOP M onthe system In any other source mode Press STANDBY ON or on the remote control gt The clock will appear on the display when the system is in Standby mode Note If you have not deactivated the demonstration it will resume five seconds after the system sw
24. ce the bass response Press DBB DBB button lights up Adjust the JOG CONTROL or press DBB on the remote control repeatedly to select the desired Dynamic Bass Boost level BEAT PUNCH BLAST or DBB OFF gt If BEAT is selected will appear on he display gt If PUNCH is selected e will appear on he display gt If BLAST is selected will appear on he display gt If DHE OFF is selected DBB will be deactivated Note Some discs or tapes might be recorded in high modulation which causes a distortion at high volume If this occurs deactivate DBB or reduce the volume Automatic DSC DBB VAC DBB selection The best DBB setting is generated automatically for each DSC or VAC selection You can manually select the DBB setting that best suits your listening environment Incredible Surround The Incredible Surround magnifies the virtual distance between the front speakers for an incredibly wide enveloping stereo effect Press INCREDIBLE SURROUND or IS on the remote control repeatedly to activate deactivate the surround sound effect gt f activated will appear on the display and the INCREDIBLE SURROUND button lights up gt If deactivated IS OFF will be displayed 15 CD VCD MP3 CD Operation 16 3 DISC DIRECT PLAY Discz os VCD123 AUX TUNER OO 5 0
25. ched to Standby mode it is still consuming some power To disconnect the system from the power supply completely remove the AC power plug from the wall socket The apparatus shall not be exposed to dripping or splashing and that no objects filled with liquids such as vases shall be placed on the apparatus Preparations Television AM loop antenna FM wire Ei antenna speaker speaker right OOF J left oye Poster G PE CR a a at booster booster speaker re speaker right left d AC power cord ax AC power cord Rear Connections The type plate is located at the rear of the system A Power Before connecting the AC power cord to the wall outlet ensure that the following are done If your system is equipped with a VOLTAGE Voltage Selector set the VOLTAGE SES SELECTOR to the local power line zav p voltage All other connections have been made WARNING For optimal performance use only the original power cable Never make or change any connections with the power switched on To avoid overheating of the system a safety circuit has been built in Therefore your system may switch to Standby mode automatically under extreme conditions If this happens let the system cool down before reusing it not available for all versions Ant
26. e remote control until the desired track appears on the display f playback is stopped press PLAY BH to start playback Note Maximum track selection from digital keys on the remote control is 199 for MP3 CD and 99 for VCD CD For MP3 CD only To select a desired Album Press ALBUM 44 or BP repeatedly until the desired Album appears on the display gt ALB will start flashing Axx THC i will be displayed after the album name scrolled through the display briefly To select a desired Title Press TITLE M or Pl repeatedly until the desired Title appears on the display Use the digital keys on the remote control to select the track under current Album directly gt TITLE will start flashing ADI will be displayed after the title name scrolled through the display briefly Tw wwvD AAA Note A represents ALBUM and T represents TRACK XX or xXx is the current selected Album or Track number ane Programming the disc tracks Programming tracks is possible when playback is stopped Up to 99 tracks can be stored in the memory in any order Load the desired discs on the disc tray refer to Loading Discs Press the VCD CD 1 2 3 button to select the disc tray gt Programming can only be done on the selected disc Press PROG to start programming gt PROG will start flashing gt It will cancel any previously programmed racks and selected r
27. e to listen to another sources except when dubbing tapes It is not possible to activate the timer function One Touch Recording Recording the mixed sound Press VCD TUNER or AUX to select the source You can connect a microphone to record the mixed sound in tape deck 2 refer to Karaoke Microphone Mixing Start playback of the selected source Press REC to start recording To stop recording Press W on the system Note One Touch Recording is not possible in TAPE mode SELECT SOURCE will be displayed CD VCD MP3 CD Synchro Recording Press WCD to select the disc Press I or PI to select the desired track to start recording You can programme the tracks in the order you want them to be recorded refer to CD VCD MP3 CD Operation Programming the disc tracks Press REC to start recording gt The disc will start playback automatically N To select another track during recording Press M or Pl to select the desired track Press PLAY IE to resume recording To stop recording Press Ml gt Recording and disc playback will stop simultaneously Press W Dubbing Tapes Load the prerecorded tape in tape deck 1 You can set the tape to the desired passage where recording will start Press DUBBING gt Playing and recording will start simultaneously gt TUE GOO will be displayed Dubbing of tapes is possible on one side of the ape only To continue recording
28. ennas Connection Connect the supplied AM loop antenna and FM antenna to the respective terminals Adjust the position of the antenna for optimal reception Position the antenna as far as possible from a TV VCR or other radiation source AM Antenna FM Antenna For better FM stereo reception connect an outdoor FM antenna to the FM ANTENNA terminal Speakers Connection Front Speakers Connect the speaker wires to the SPEAKERS FRONT terminals right speaker to R and left speaker to L coloured marked wire to and black unmarked wire to ls a ae Fully insert the stripped portion of the speaker wire into the terminal as shown Notes For optimal sound performance use the supplied speakers Do not connect more than one speaker to any one pair of speaker terminals Do not connect speakers with an impedance lower than the speakers supplied Please refer to the SPECIFICATIONS section of this manual D Video Out Connection Connect the VIDEO OUT CVBS terminal at the rear of the system to the TV or VCR VIDEO IN for viewing or recording Note To avoid magnetic interference with the picture on your TV do not position the front speakers too close to the TV Connecting other equipment to your system Connect the audio left and right OUT terminals of a TV VCR Laser Disc player DVD player or CD Recorder to the AUX CDR IN terminals Note If y
29. epeat mode Press I or Pl repeatedly or Digits 0 9 on he remote control to select the desired track For MP3 CD press ALBUM and TITLE to select the desired Album and Title for programming Press PROG to store the track Repeat steps 3 5 to store other tracks Press PLAY P Ill to start programme playback 2 PLAY PROGRAM will be displayed To end programming without starting playback press W once gt The total number of tracks programmed and he total playing time will appear on the display Notes Programme cannot be used for VCDs when PBC is switched on Switch off PBC before storing tracks For MP3 CD total playing time will not be shown If the total playing time is more than then will appear on the display instead of the total playing time If you attempt to programme more than 99 tracks PROGRAM FULL will be displayed During programming if no button is pressed within 20 seconds the system will exit the Programme mode automatically MEL g 17 77 To review the programme Stop playback and press I or Pl repeatedly To exit review mode press Ml CD VCD MP3 CD Operation To erase the entire programme Press M once when playback is stopped or twice during playback 9 PROGRAM CLEARED will be displayed gt PROG will disappear from the display Note The programme will be erased if you change source select another disc tray or disconnected the system
30. etising tape available at your dealer Troubleshooting Under no circumstances should you try to repair the system yourself as this will invalidate the warranty Do not open the system as there is a risk of electric shock If a fault occurs first check the points listed below before taking the system for repair If you are unable to remedy a problem by following these hints consult your dealer or service centre Problem DISC PLAYER OPERATION Solution UNREADABLE DISC is displayed Check if the disc is inserted upside down Wait until the moisture condensation at the lens has cleared Replace or clean the disc see Maintenance Use a readable disc or correct recorded format P3 CD NG DISC is displayed Insert a disc No picture on TV screen Connect the cable betwen the system and TV No colour on TV Q hange the system to the respective PAL or TSC setting Cannot adjust the TV system to PAL or NTSC Remove the MP 3 CD from disc tray 1 or press DISC CHANGE twice to select a non MP3 disc ray 31 Troubleshooting RADIO RECEPTION Radio reception is poor If the signal is too weak adjust the antenna or connect an external antenna for better reception Increase the distance between the Mini HiFi System and your TV or VCR TAPE OPERATION RECORDING Recording or playback cannot be made Clean deck parts
31. ill start searching for all radio To stop storing the automatic preset Press PROG or M on the system Note If no preset number is selected automatic preset will begin from preset 1 and all your former presets will be overridden Manual Preset Programming Press TUNER BAND repeatedly to select the desired waveband FM or MW Press PROG gt PROG will start flashing gt The next available preset number will be displayed for selection Press and hold lt 4 or gt gt until the frequency indication starts to change then release gt The display will show SEARCH until a radio station with sufficient signal strength is found To store the radio station to another preset number Press I or Pl to select the desired preset number Press PROG again to store the radio station gt PROG will disappear from the display Repeat steps 2 4 to store other preset radio stations Tuning to a weak radio station Press 44 or PP briefly and repeatedly until the optimal reception is found To stop storing the manual preset Press W on the system 23 Radio Reception 24 Notes Ifyou attempt to store more than 40 preset radio stations PROGRAM FULL will be displayed During programming if no button is pressed within 20 seconds the system will exit the Programme mode automatically Tuning to Preset Radio Stations Once you ve preset the radio stations press I or Pl to select the desi
32. isposed off properly Controls main system s illustration on page 3 i JJO 8808 QBOOQROOE PHILIPS Notes for remote control First select the source you wish to control by pressing one of the source select keys on the remote control VCD 123 or TUNER for example Then select the desired function P I4 PI for example 10 Controls on the system and remote control 1 STANDBY ON to switch the system on or to Standby mode DISPLAY SCREEN o view the current status of the system DISC TRAYS DISC CHANGE o change disc s DISC 1 DISC 2 DISC 3 o select a disc tray for playback OPEN CLOSE o open or close the disc tray INTERACTIVE VU METER o show the VU volume unit meter in music or volume mode depending on the display mode selected VOLUME to increase or decrease the volume 9 Tape Deck Operation AUTO REPLAY to select continuous playback in either AUTO PLAY or ONCE mode only DUBBING to dub a tape REC to start recording on tape deck 2 SOUND NAVIGATION to select the desired sound feature DSC VAC or DBB A JOG CONTROL to select the desired sound effect for the selected sound feature 0 DSC wees DIGITAL ROCK POR NEWAGE CLASSIC or ELECTRIC VA HALL CONCERT CINEMA DISCO ARCADE or CYBER DBB 48 BEAT PUNCH or BLAST 42 INCREDIBLE SURROUND IS to activate o
33. itches to Standby mode Power Saving Automatic Standby As a power saving feature the system will automatically switch to Standby mode if you do not press any buttons within 30 minutes after a disc or tape has stopped playing Display mode There are four different display modes for selection Press DISPLAY repeatedly to select NORMAL MODE 1 MODE 2 or MODE 3 NORMAL All available LEDs will light up and the display screen will have full brightness The VU meter will be in music mode 14 MODE 1 All available LEDs will light up and the display screen will have full brightness The VU meter will be in volume mode MODE 2 All available LEDs will light up and the display screen will be at half brightness The VU meter will be in music mode MODE 3 The display screen will be at half brightness The VU meter and all LEDs will be off Volume Control Adjust VOLUME to increase turn knob clockwise or press VOLUME or decrease turn knob anti clockwise or press VOLUME the sound level To listen through the headphones Connect the headphones plug to the socket at the front of the system gt The speakers will be muted Sound Navigation For optimal sound listening select only one of the following navigation sound controls at a time MAX sound DSC or VAC MAX Sound MAX sound provides the best mixture of various sound features DSC VAC DBB for e
34. l Press and hold CLOCKeTIMER for more than two seconds to select timer mode AM i2 00 or 00 00 or the last timer setting will start flashing gt TIMER 2 will start flashing gt The selected source will be lighted while other available sources are flashing Press VCD TUNER or TAPE to select the desired source Before setting the timer make sure the music source has been prepared VCD Load the disc s To start from a specific track make a programme refer to CD VCD MP3 CD Operation Programming the disc tracks TUNER tune to the desired radio station TAPE load the prerecorded tape into tape deck 2 Press 44 or gt gt on the system repeatedly to set the hour for the timer to start Press I or Pl on the system repeatedly to set the minute for the timer to start Press CLOCKeTIMER to store the start time gt TIMER ON will be displayed and followed by the set timer lt and then the selected source gt TIMER will remain on the display At the preset time the selected source will play To exit without storing the setting Press Ml on the system a an Listening to External Sources 1 Connect the audio out terminals of the external equipment TV VCR Laser Disc player DVD player or CD Recorder to the AUX CDR IN terminals of your system Clock Timer To deactivate the TIMER Press and hold CLOCKeTIMER for more than two seconds Press W o
35. menu consists of a list of titles you can select a sequence directly Press Digits 0 9 on the remote control to select your choice gt The VCD starts playing of the selected sequence automatically Note Ifa menu consists of more than one page press KB to go through the pages Switching off PBC In stop mode press PBC gt PBC OFF will be displayed Notes Programme mode is not available whenever PBC mode is switched on The menu structure depends on the information stored on the VCD Please refer to the information supplied with the disc CD VCD MP3 CD Operation Return Press RETURN to return to the previous VCD disc MENU level PBC mode must be switched on Digest This feature allows you to scan through aVCD for a quick review PBC mode must be switched off There are four digest mode for selection Press DIGEST on the remote control gt DIGEST appears on the display 1 INTRO SCAN 2 DIGEST DISC 3 DIGEST TRACK and 4 EXIT DIGEST MENU appear on the TV screen INTRO SCAN DIGEST DISC DIGEST TRACK EXIT DIGEST MENU Press digit 1 on the remote control to select INTRO SCAN gt The first 10 seconds of each track are played Press digit 2 on the remote control to select DIGEST DISC gt The first frame of each track appears on the TV screen gt Press digit 0 9 on the remote control to playback the desired tracks gt
36. n the system to cancel the timer gt The display will show CANCEL and TIMER 4 will disappear from the display To activate the TIMER for the same preset time and source Press and hold CLOCKeTIMER for more than two seconds Press CLOCKeTIMER again to store the start time gt The last set timer information will be shown for a few seconds and TIMER will appear on the display Notes If the source selected is VCD playback will begin with the first track of the last selected disc or other trays if disc is empty If all the disc trays are empty TUNER will be selected instead During timer setting if no button is pressed within 90 seconds the system will exit timer setting mode automatically External Sources Press AUX CDR DVD repeatedly to select CDR DVD mode or normal AUX mode L IR Iv D or AUX will be displayed If the sound from the external source is distorted select CDR DVD mode for listening Notes You are advised not to listen to and record from the same source simultaneously All the navigation sound control features DSC or VAC for example are available for selection Refer to the operating instructions for the connected equipment for details For Recording please refer to Tape Operation Recording 29 Specifications AMPLIFIER Output power uw 3200 W PMPO 2 x 60 W RMS Signal to noise ratio 75 dBA IEC Frequency response 50 20
37. or the power cord has been disconnected Reset the clock timer The system displays features automatically and buttons start flashing Press and hold DEMO STOP M on the system o switch off the demonstration
38. ou are connecting equipment with a mono output a single audio out terminal connect it to the AUX CDR IN left terminal Alternatively you can use a single to double cinch cable still be mono sound F Power Booster Connection 1 Connect the BOOSTER OUT Right and Left terminals of the mini system to the power booster amplifier BOOSTER IN Right and nu oO UB W Preparations A A O p 5 2 ma ti 3 HI PERFORMANCE Left terminals respectively Connect the speaker wires to the BOOSTER SPEAKERS terminals right speaker to R and left speaker to L coloured marked wire to and black unmarked wire to Set the VOLTAGE SELECTOR to the local power line voltage Plug in the AC mains to the wall socket Switch on the POWER SWITCH to activate he power booster amplifier Press STANDBY ON button to switch the system ON or to Standby mode Rotate the VOLUME control to adjust the oudness of the power booster amplifier Inserting batteries into the Remote Control Insert two batteries Type R06 or AA into the remote control with the correct polarity as indicated by the and symbols inside the battery compartment CAUTION Remove batteries if they are exhausted or not to be used for a long time Do not use old and new or different types of batteries in combination Batteries contain chemical substances so they should be d
39. r deactivate the surround sound effect 43 MAX SOUND MAX to activate or deactivate the optimal mix of various sound features MIC LEVEL to connect microphone jack to adjust the mixing level for karaoke or microphone recording 4 to open the tape deck door TAPE DECK 2 47 TAPE DECK 1 SOURCE to select the following VCD PAL NTSC CD 1 2 3 to select disc tray 1 2 or 3 this system can playback normal CD VCD MP3 CD format disc on the system only to select corresponding video output for NTSC or PAL system of your TV set except Multi system TV TUNER BAND to select waveband FM or MW TAPE TAPE 1 2 to select tape deck 1 or 2 AUX CDR DVD to select a connected external source CDR DVD or AUX auxiliary mode Mode Selection PLAY PAUSE PII for CD VCD MP3 CD to start or interrupt playback for TAPE nran to start playback for PLUG amp PLAY on the system only to initiate and start plug amp play mode SEARCH TUNING ALBUM for MP3 CD only to select previous next Album for VCD only to move the zoomed picture to he left or right for CD VCD to search backward forward for TUNER o tune to a lower or higher lt lt gt gt radio frequency for TAPE si o rewind or fast forward on the system only to set the nour Controls DEMO STOP CLEAR E for CD VCD MP3
40. red preset number gt The preset number radio frequency and waveband will appear on the display Erasing a Preset Radio Station Press I or Pl to select the preset radio station to be erased Press and hold Ml on the system until PRESET TELE TED appears on the display gt The radio frequency remain on the display gt The preset numbers of all other preset radio stations in the band with higher numbers are also decreased by one Repeat steps 1 2 to erase other preset radio stations For Recording please refer to Tape Operation Recording Changing Tuning Grid In some countries the frequency step between adjacent channels in the MW band is 10 kHz 9 kHz in some areas The preset frequency step in the factory is 9 kHz Changing the tuning grid will erase all previously stored preset radio stations Disconnect the system from the AC power supply pull out the AC power cord While holding down TUNER and gt gt on the system reconnect the system to the AC power supply gt The display will show GRID 9 or GRIT we tu Notes GRID 9 and GRID 10 indicate that the tuning grid is in step of 9 KHz and 10 kHz respectively The FM tuning grid also will be changed from 50 kHz to 100 kHz or vice versa Tape Operation Recording Fw VCD MINI HIFI SYSTEM UT VOLUME ET eee Ne i 1 le MAX BASS DYNAMIC AMPLIFICATION CONTROL DAC
41. regulations regarding the disposal of packaging materials exhausted batteries and old equipment Supplied accessories Remote control Batteries two AA size for remote control AM loop antenna FM wire antenna AC power cord One Video cinch cable General Information Safety Information Before operating the system check that the operating voltage indicated on the typeplate or the voltage indication beside the voltage selector of your system is identical with the voltage of your local power supply If not please consult your dealer Place the system on a flat hard and stable surface Place the system in a location with adequate ventilation to prevent internal heat build up in your system Allow at least 10 cm 4 inches clearance from the rear and the top of the unit and 5 cm 2 inches from each side Do not expose the system batteries or discs to excessive moisture rain sand or heat sources caused by heating equipment or direct sunlight If the system is brought directly from a cold to a warm location or is placed in a very damp room moisture may condense on the lens of the disc unit inside the system Should this occur the CD player would not operate normally Leave the power on for about one hour with no disc in the system until normal playback is possible The mechanical parts of the set contain self lubricating bearings and must not be oiled or lubricated When the system is swit
42. res Plug and Play Plug and Play allows you to store all available radio stations automatically If Plug and Play has not been installed When you turn on the system HUT INSTALL PRESS PLAY will be displayed Press PLAY IE on the system to start installation INSTALL will be displayed and followed by TUNER and then AUTO gt PROG will start flashing gt The system will search for all radio stations on the FM band then the MW band gt All available radio stations with strong signal strength will be stored automatically gt The system will stop searching when all the available radio stations are stored or when the memory for 40 preset radio stations is used gt The last preset radio station will play when Plug and Play is completed To reinstall Plug and Play In Standby or Demonstration mode press and hold PLAY IE on the system until AUTO INSTALL PRESS PLAY is displayed Press PLAY BIT again to start installation All previously stored radio stations will be replaced To exit without storing the Plug and Play Press W on the system Notes When the power is turned on the disc tray may open and close to initialise the system Ifyou do not complete Plug and Play installation Plug and Play will be reinitiated the next time you turn on the power If no stereo frequency is detected during Plug and Play CHECK ANTENNA will be displayed During Plug and Pl
43. xample PR PR Press MAX SOUND or Esc MAX ON OFF on the 7 remote control repeatedly to activate deactivate the optimal sound gt If activated will appear on the display and the MAX SOUND button lights up gt If deactivated MAX OFF will be displayed Note When MAX sound is selected all other sound navigation will switch off automatically DSC Digital Sound Control The DSC feature enables you to adjust the system to suit your type of music Press DSC gt DSC button lights up Adjust the JOG CONTROL or press DSC on the remote control repeatedly to select the desired Digital Sound Control effect DIGITAL ROCK POR NEWAGE CLASSIC or ELECTRIC gt The selected DSC will be highlighted DIGITAL SOUND CONTROL GEE UD CES Qin CEE Note For a neutral sound effect select CLASSIC VAC Virtual Ambience Control The VAC feature enables you to adjust the system to select a type of environment Press VAC gt VAC button lights up Adjust the JOG CONTROL or press VAC on the remote control repeatedly to select the desired Virtual Ambience Control effect HALL CONCERT CINEMA DISCO ARCADE or CYBER gt The selected VAC will be highlighted VIRTUAL AMBIENCE CONTROL Note When you select VAC Incredible Surround will switch on automatically Basic Functions DBB Dynamic Bass Boost There are three DBB settings to enhan
Download Pdf Manuals
Related Search