Phantom Tech SU0508L User's Manual
Contents
1. Bracket Screen Housing Screen Sassy a Housing ea Mounting o Bracket 11 Installing the Top Rail 1 Remove the backing on the adhesive strip on the Top Rail 2 Place the uncapped end of the Top Rail over the Sliding Bar Top Cap and slide the Top Rail into the Mesh Lock Adjuster Ensure that it fits tightly A 3 Align the Top Rail so that the edge of the Top Rail End Cap closest to the door is in a straight line to the L shaped edge of the Mounting Bracket This line should be at a 90 angle to the mounting surface on which the Mounting Bracket was attached B Once aligned press the Top Rail firmly into place C and secure with the 1 1 4 32 mm Wood Screws provided Mesh Lock Top Rail Sliding Bar Top Cap Top Rail End Cap Mounting Bracket Top Rail End Cap Top Rail om 1 1 4 32 mm Sliding Bar Wood Screw aM 12 Installing the Catch Frame 1 Insert the Catch Frame into the bottom of the Top Rail End Cap Ensure that the Top Rail End Cap fits tight to the right side of the door frame D 2 Using a level adjust the Catch Frame along the mounting surface of the door frame to ensure that it is positioned plumb It is important that the bottom of the Catch Fra2. check to ensure that the door frame is square If not use shims to bring the door frame to square before beginning installation Is this Sure View Screen being installed on a Left Hinged Door Finally make sure the right model has been purchased The Sure View Screen in this package is configured for a LEFT hinged door To identify door hinging look at the door from the side on which the Sure View Screen will be mounted The hinges should be on the left side and the door knob or handle should be on the right Mounting Surface Before beginning make sure that all these parts are included in the A Sure View Screen package il TH 7 Screen Housing Mounting Assembly Bracket used on flat door sills Required Tools Hacksaw Measuring tape 32tpi A a LA I Carpenter Philips Electric drill square screwdriver er ome Bottom Rail Type B used on angled door sills Parts and Tools Al Stickers 2pcs for Latch f 5 8 16 mm Pan Head Screws 10pcs for Mounting Bracket and Catch Frame for Top Rail 5 8 16 mm Self Tapping Screws Catch 2pcs for Bottom Rail Frame Top Rail Sure View Screens can be sized and installed using common household tools Make sure all necessary tools are available before beginning NOTE A cho
3. Installation Manual for PHANTOM Sure View O S Retractable Screen Solutions For Left Hinged Doors Durable Reliable Attractive For door openings up to 36 914 mm wide and 81 1 4 2 064 mm high Quick and Easy to Size and Install PHANTOM True to you Pure Phantom Congratulations and thank you for purchasing Sure View The Sure View retractable screen is designed and manufactured by Seiki Screen Systems the world s largest manufacturer of retractable screens Phantom Screens North America s leading brand of retractable solutions is proud to bring you these innovative products Thanks to rigorous design and product testing the Sure View Screen will provide years of dependable operation Plus it comes with a factory supplied limited lifetime warranty on all parts against manufacturer s defects The Sure View Screen is designed for easy sizing and installation This Installation Manual provides a step by step guide through the entire process Any questions Contact our Help Line Toll Free at 1 888 PHANTOM 1 888 742 6866 Index Getting to Know the Sure View Screen csceeeeeeee 4 Parts and Tolg asiain aiaiai aiaiai 5 Measuring the Door Opening swsireccsiieinonaais 6 Sizing the S re V
4. Type B Angled Surface Catch Frame Align The Centre Bottom Rail f 5 8 16 mm Self Tapping H Screw Bottom Rail 1 Loosen the screw on the Catch 2 Move the Catch up and down to determine the position where the Latch makes a secure contact with the Catch Tighten the screw on the Catch to secure it in place D 3 Adhere the Stickers to the front and rear of the Latch as indicated E Sliding Bar Latch Adjusting the Catch Catch Frame Catch ze 1 D E Sticker Sticker b A 1 Latch Final Adjustments Mesh Lock Adjuster Dial om ely rd Lock Spring Tension Adjuster LA be D Dial Q i B Increase Spring Tension 16 Adjusting the Mesh The Sure View Screen can be adjusted to reduce the amount of mesh discharged from the Screen Housing This keeps the mesh tight to maintain the effectiveness of the Sure View Screen in keeping out unwanted insects 1 Close the Sure View Screen 2 Turn the dial on the Mesh Lock Adjuster as indicated in illustration A until meeting with resistance but without over tightening Adjusting Spring Tension 1 Ifthe Sure View Screen does not retract fully or
5. been installed 42 mm mounting 1 5 8 surface Door Sill Filler strip Sizing the Sure View Screen If the door opening is smaller than 36 914 mm wide and 81 1 4 2 064 mm high the Sure View Screen must be cut Determine Length to be Cut from Top and Bottom Rails To determine the length to be cut from the Top and Bottom Rails use the following formula Measured Width Length to be cut off 36 914 mm 1 Determine Length to be Cut from Screen Housing Assembly and Catch Frame To determine the length to be cut from the Screen Housing Assembly and Catch Frame use the following formula Measured Height Length to be cut off 81 1 4 2 064 mm Cutting the Top and Bottom Rail and Catch Cutting the Top Rail of the Sure View Screen is an easy process 1 Using the Length to be cut dimension calculated on Page 7 carefully measure the Top A Rail on the end opposite the end cap Mark on Top Rail Length all sides to ensure an even cut to be cut 2 Wearing safety glasses cut straight through the a Top Rail using either a chop saw or a hacksaw with a bi metal blade A Choosing and Cutting the Bottom Rail Bottom Rail Type A Before cutting it is important to select the i correct Bottom Rail
6. ed on the outside of Catch Frame the home Out swing doors open to the ml outside of the home and require the Sure one rouch View Screen to be installed on the inside of the home eee P i Type Aor B Does the Sure View Screen fit the Spring Tension TH i Adjuster ie Door Opening oe Retracting Sliding Mesh Guide Make sure the Sure View Screen will fit the door The Sure View Screen will accommodate a door opening of up to 36 914 mm wide and 81 1 4 2 064 mm high If the door opening is larger than this the Sure View Screen can still be installed by attaching a filler strip under the door frame to reduce the height of the door opening Refer to page 6 for details Is there enough Mounting Surface for the Sure View Screen The Sure View Screen is a recess mount screen which installs on the inside surface of the door frame Mounting Surface as indicated in diagram A To ensure that the Sure View Screen is fully recessed after installation there must be at least 1 5 8 42 mm of mounting surface However the Sure View Screen can accommodate a minimum mounting surface of 1 1 8 28 mm In this instance the Mounting Bracket will extend slightly beyond the door frame This mounting surface must be flat and at a right angle 90 to Bottom Cap Is the Door Opening Square For the Sure View Screen to operate effectively the door opening must be perfectly square Using a Carpenter Square
7. for installation The Sure View Flat Surface Screen package comes with two Bottom Rails to accommodate both flat and angled door sills Please refer to B to determine the correct Bottom Rail Yy B 1 Using the same Length to be cut dimension used for the Top Rail measure and mark the Choose the correct Bottom Rail for either appropriate Bottom Rail on all sides to ensure a flat or angled door sills even cut The Bottom Rail can be cut on Bottom Rail Type B Angled Surface either side C 2 Cut straight through the Bottom Rail C Bottom Rail Length to be cut Cutting the Catch Frame a e cu Either end of the Catch Frame can be cut 1 Using the Screen Housing and Catch Frame Length to be Cut dimension calculated on Page 7 carefully measure and mark the Catch Frame on all sides to ensure an even cut Catch Frame D 2 Cut straight through the Catch Frame D ienai to be cut NOTE It is important to wear safety glasses at all times when cutting components of the Sure View Screen After cutting any part of the Sure View Screen use a file to remove any burrs from the cut surfac utting the Screen Housing Assembly It is easy to cut right through the Screen Housing Assembly of the Sure View Screen using a chop saw or hacksaw NOTE All cutting will be done on the upper end of the Screen Housing Assembly The Mounting Mounting we _ Bracket Bracket on the Screen Housing As
8. iew DOUCEIN dice ccicssscvanicevencidonsevinceranreaesys 7 Cutting the Top Bottom Rail and Catch Frame 8 Cutting the Screen Housing Assembly ccseceseeees 9 Installing the Screen Housing Assembly 10 11 Instalime the TOP Rail ss sa20 Hsocericscassanisonetdeasancacaittecotinnse 12 Installing the Catch Praiine ico iccnsateicicesatsdasenisteamecgistivens 13 Installing the Bottom Rail sssiiseisristasiieeernesnisiais 14 Adjusting th Catel serorei neee eai 15 Final As siscrscsenininsoenaasatets teaseniascedcacceacmeass 16 service and Maintenance Hints ccssiscisasesnacdacteawaborneds 17 For installations on double doors French doors you will need one left Sure View Screen one right Sure View Screen and one Double Door Kit Please refer to Installation Manual within the Double Door Kit prior to installation The Sure View Screen is not intended for installation on a Sliding Patio Door Getting to Know the Sure View Scree Before beginning become familiar with Sliding Bar Slidin Top Rail Top Cap 9 ames gt Top Rail the Sure View Screen and the door on f p fo ai NE J Endc which it will be installed Mesh Lock 7 L Adjuster yo The Sure View Screen can be installed on both in swing and out swing doors In swing doors open to the inside of the home and require the Sure View Housing eh Screen to be install
9. me fits tight to the door sill E 3 Attach the Catch Frame to the door frame using the 5 8 16 mm Pan Head Screws provided F L Top Rail End Cap Catch Frame Catch Frame ar 5 8 16 mm Pan Head Screw re Installing the Bottom Rail If the Bottom Rail did not require cutting it is important to select the correct Bottom Rail for installation The Sure View Screen package comes with two Bottom Rails to accommodate both flat and angled door sill Please refer to A to determine the correct Bottom Rail 1 Remove the backing on the adhesive strip on the Bottom Rail 2 While slightly lifting the Sliding Bar insert one end of the Bottom Rail into the groove at the bottom of the Sliding Bar Bottom Cap B Sliding Bar NOTE If using the Angled Bottom Rail ensure that it is oriented so that the top of the Bottom Rail is flat and level when placed on the door sill 3 Position the other end so that the center of the Catch Frame aligns with the center of the Bottom Rail C When aligned press the Bottom Rail firmly onto the door sill 4 Fasten the Bottom Rail to the door sill using the 5 8 16 mm Self Tapping Screws provided It is not necessary to pre drill the surface below Me 14 Bottom Rail Type A m j Ue Flat Surface Bottom Rail
10. p saw can be used in place of a hacksaw provided that a bi metal blade has been properly installed 1 1 4 32 mm Wood Screws 3pcs Measuring the Door Opening Now it s time to measure the door opening The Sure View Screen will accommodate a door opening of up to 36 914 mm wide and 81 1 4 2 064 mm high If the door opening is smaller than this the Sure View Screen will have to be cut For the width measure the dimension between the right and left sides of the door frame at both the top and bottom of the doorway as indicated in the diagram Record the smallest of the two sizes in the box labeled Width below For the height measure the dimension between the top of the door frame and the door sill at the point where the Sure View Screen will be installed We recommend positioning the Sure View Screen flush with the outside edge of the door frame the furthest point away from the door Measure from the top of the door frame to the door sill at a point 1 5 8 42 mm back from the outside edge of the door frame A Measure in all three locations and record the smallest dimension in the box labeled Height below Width Height NOTE If the door opening is too high a filler strip must be installed before the Sure View Screen can be installed The filler strip must reduce the door opening to 81 1 4 2 064 mm or less All measurements must be made after the filler strip has
11. quickly enough turn the dial on the Spring Tension Adjuster as indicated in illustration B to increase spring tension 2 Ifthe Sure View Screen retracts too quickly turn the dial on the Spring Tension Adjuster in the opposite direction to reduce spring tension The Sure View Screen Installation is Now Complete Service and Maintenance Hints The Sure View Screen is designed and engineered to be maintenance free Please review these helpful hints to ensure the smooth operation of the Sure View Screen for years to come All moving components used in the Sure View Screen are manufactured from a mixture of nylon and other materials This combination of compounds is strong impact resistant and self lubricating Do not use oil grease or oil based sprays or lubricants on any of the components on the Sure View Screen These products attract dirt and debris and may cause the Sure View Screen to react abnormally However the periodic application of a dry silicon lubricant to the moving parts is permissible e We recommend that while not in use the Sure View Screen be kept in the retracted position This will help extend the life of the screen mesh In the retracted position the mesh is protected and kept clean e The Bottom Rail should be kept free of dirt and debris Use a broom to remove any obstructions from the Bottom Rail e Ifthe screen mesh becomes damaged or torn a Replacement Mesh Cartridge can be purchased
12. sembly is A clearly labeled with CUT and NO CUT zones Mesh Lock Adjuster 1 Remove the Mesh Lock Adjuster and Sliding Bar Top Cap from the Screen Housing Assembly by S Pr ae Bi removing their screws with a Phillips screwdriver A MS gt ers 2 Detach the Sliding Bar from the Sliding Bar Bottom Cap Sie and slide it towards the upper end of the Screen Housing Assembly until it is aligned with the top of the Assembly and the mesh B Mounting _ Bracket Med Z 3 Slide the Mounting Bracket until its upper edge is aligned with the upper edge of the Screen Housing Assembly C 4 With all components aligned carefully Sliding sar measure and mark the Screen Housing Sliding Bar and Mounting Bracket on all sides based on the Length to be cut dimension calculated on Page 7 D Bs Sliding Bar 5 Wearing safety glasses cut straight through all components of the assembly Use a fileto Sy remove any burrs from the cut surfaces j 6 Re attach the Sliding Bar onto the Sliding lt lt Bar Bottom Cap B Make sure that it is 5A pushed in as far as it will go 7 Re attach the Mesh Lock Adjuster and Sliding Bar Top Cap to the Screen Housing Assembly and replace the screws A 8 Slide the Mounting Bracket completely off the Screen Housing and set aside Installing the Screen Housing Asse Securing the Mounting Bracket The Mounting Bracket of the Sure View Screen is in
13. separately through your local dealer or retailer Before installing the Sure View Screen please take the time to read the installation instructions thoroughly Help Hotline The Sure View Screen was designed for easy sizing and installation This Installation Manual provides a step by step guide through the entire process If there are any questions during the installation of the Sure View Screen please call toll free 1 888 PHANTOM 1 888 742 6866 PHANTOM True to you Pure Phantom Sure View Screen Limited Lifetime Non transferable Manufacturer s Warranty The Sure View Screen is warranted by Seiki Screen Systems to be free of manufacturer s defects in materials or workmanship for as long as the original purchaser owns and or resides at that residence and that the product remains at its original point of installation Seiki Screen Systems will repair or replace at its discretion any component within the terms and conditions of this warranty which is deemed as being defective from the manufacturing process upon proof of purchase This warranty excludes the fiberglass screen mesh Furthermore this warranty does not cover components damaged through improper use or installation or if components have been altered from their original sta
14. stalled on the left inside surface of the door frame The ideal minimum dimension of this surface is 1 5 8 42 mm This surface must be perfectly flat and at a right angle 90 to the door If the mounting surface is greater than 1 5 8 42 mm the Mounting Bracket can be positioned anywhere on this surface We recommend positioning the Mounting Bracket flush with the edge of the door frame the furthest point away from the door 1 Locate the L shaped edge of the Mounting Bracket A The Mounting Bracket will be positioned with this edge closest to the door 2 Remove the adhesive strip on the back of the Mounting Bracket and position on the mounting surface B 3 Using a level adjust the Mounting Bracket to ensure that it is positioned plumb 4 Attach the Mounting Bracket to the door frame using the 5 8 16 mm Pan Head Screws provided y Mounting Surface A L Shaped Edge i A Mounting Bracket Le g ae 5 8 16 mm Heng Screw Da E ling the Screen Housing Assembly Attac 1 Place the front left corner of the Screen Housing Assembly in the outside edge of the Mounting Bracket C ing the Screen Housing Assembly 2 Pivot the Screen Housing along this point until the back of the Assembly snaps into the L shaped edge on the back of the Mounting Bracket Snap Screen Housing into L Shaped Edge of Mounting
15. te in a manner not otherwise prescribed in this manual This warranty is strictly limited to defective components only This non transferable limited warranty excludes labor breakage or damage due to normal wear and tear lack of maintenance or use for other than residential applications accidents and acts of god Replacements or repairs made subject to this limited warranty are otherwise warranted for the balance of the original warranty period Seiki Screen Systems liability under this limited warranty is restricted to the corrective actions as set forth herein and contrarily repudiates all incidental and consequential damage It is the responsibility of the consumer to notify Seiki Screen Systems of missing components within 30 days of the purchase of the Sure View Screen The Sure View Screen is designed to assist in keeping unwanted insects from the home it is in no way intended as a safety or security device to prevent access by individuals animals or small children Liability for any damages including but not limited to general special indirect incidental consequential aggravated punitive or exemplary damages and economic loss as well as for breach of any expressed or implied warranties including but not limited to implied warranties of merchantability quality and fitness for any purpose other than as prescribed herein is disavowed and omitted here from to the extent that such a disclaimer and preclusions are permitted b
16. y the laws of any particular jurisdiction Maintenance Keep Bottom Rail clean and free of debris Periodic use of silicone spray onto the inside of the Top Rail the Bottom Rail and the Retracting Mesh Guide is recommended do not use petroleum based lubricants Sure View Screen Designed and Manufactured by Seiki Screen Systems PRODUCT INFORMATION MANUAL For warranty claims Call 1 877 446 7180 Or email info seikiscreensystems com Designed amp Manufactured by Seiki Screen Systems Marketed and Distributed by Phantom Screens PHANTOM True to you Pure Phantom Seiki Screen Systems Phantom Mfg Intl Ltd Call 1 877 446 7180 Call 1 888 PHANTOM Or email info seikiscreensystems com Or email phantom phantomscreens com www seikiscreensystems com www phantomscreens com 2008 Phantom Mfg Int l Ltd amp Seiki Screen Systems SU0S508L
Download Pdf Manuals
Related Search