Pelikan DNDC540 User's Manual
Contents
1. SENS UP helps maintain a bright clear screen image by automatically detecting changes in the level of light in low light level conditions Digital Day amp Night Dome Camera M By Digital Day amp Night Dome Camera il Camera Operation SPECIAL 1 Position the cursor to point to SPECIAL on the SETUP menu by using the 3 Press the SET button UP and DOWN buttons 2 Select the mode required by pressing the UP or DOWN button Camera ID ABCDEFGHIJKLM NOPORSTUVWXYZ SPEC TAR abcdefghijklm gt CAMERA ID OFF mU eee COS cm c CLR POS END SYNC INT Fe MM MOTION DET OFF PISO OFF 4 Up to 15 characters can be used for the camera ID PLES BAD QD Move the cursor to the letter required by using the UP and DOWN button SHARPNESS ON d RESET RETURN Camera ID 8 A ABCDEFGHIJKLM NOPORSTUVWXXZ abcdefghijklm nopqrstuvwxyz Q CAMERA ID If an ID is input this camera ID appears on the monitor and recorded footage 0123456789 1 Position the cursor to point to CAMERA ID by using the xpi D PE UP or DOWN button Evra a a a a 2 Select an ID from A B Y Z a b y z 0 1 8 9 by using the UP DOWN LEFT and RIGHT buttons Lock in the characters by using the SET button Once locked in the cursor moves to the next space in the ID Repeat the above steps until the ID is complete Y If OFF is selected the ID does not SPECIAL appear on the monitor even if it has been input gt CAMERA ID COLOR SYN2. Digital Day amp Night Dome Camera Instruction Guide Model DNDC540 amp DNDC540DV www PelikanCam com 8 Horizontal Resolution of 540 TV Lines d A I N gt 3 Axis built in 120mm Dome Housing Digital Day amp Night Dome Camera 2_ B Features hA 7 Clear image quality has been achieved by employing a SONY CCD with 410 000 effective pixels which provides a horizontal resolution of 540 TV lines h DAY amp NIGHT J A e m This camera has a function that auto matically selects the mode that is appropriate for daytime or night time conditions The COLOR mode operates in daytime conditions to provide optimum colors and BW mode operates in night time conditions to enhance the definition of the image J Ele amp tronic IRIS TA Vane The electronic IRIS function enables continuous automatic control of the shutter between 1 60 1 120 000 seconds PRIVACY Function apne The PRIVACY function conceals the areas not required to appear on the image i d X Vent NN Y High Sensitivity A J e NU The built in high sensitivity SONY COLOR CCD enables a clear image even in 0 3Lux 0 1Lux B W or as low as 0 002Lux with SENS UP A 1 DNR Digital Noise Reduction 5 y NS The amount of low illuminance noise has been significantly reduced and the signal to noise ratio S N ratio as well as horizontal resolution have been improved
3. resulting in clear and sharp images displayed even in low light b A 1 Controlled by OSD Menu A FT ta Y 3 The camera functions are controlled by selecting text displayed on the monitor screen bh A 1 Additional Functions Yap SENS UP MOTION DETECTION MIRROR SHARPNESS and SYNC INT LL functions are also available Warning E The camera requires periodic inspection Contact an authorised technician to carry out the inspection Stop using your camera when you find it malfunctioning If the camera emits smoke or is unusually hot for a long period a fire may be caused Do not Install the camera on a surface that can not support it If the camera is installed on an inappropriate surface it may fall and cause injury Do not hold plug with wet hands It could cause an electric shock Do not dis assemble the camera It may result in an electric shock or other hazards Do not use the camera close to a gas or oil leak It may result in a fire or other hazards 3 Digital Day amp Night Dome Camera E Contents FN 2 Camera Operation stonku oed us Cet onset viet oed Cet est ded 14 Warnings and Precautions cle utu PROIN DOO UR ERU Iud ERU NE 3 E Settings 15 Components IT 8 s LENS selectlori cxxeeiasescoxnaxieceseiztibedun em cdit kieku inta sensji Gig SHUTTER condition and speed control ee ee 18 Names and Functions of Pats eee 9 WHITE BALANCE control 49 p L A ne
4. This mode can be used within the colour temperature range 1 800 K 10 500 K eg fluorescent light outdoor sodium vapour lamp etc AWC Auto White Balance Control Press the SET button while the camera is directed at a piece of white paper to obtain the optimum state under current illumination If the environment including the light source changes the white balance will need to be adjusted again MANUAL The manual adjustment mode enables finer adjustment Select ATW or AWC first then change to manual adjustment mode and press the SET button Set the appropriate colour temperature then increase decrease the red and blue colour values and monitor the colour changes of the object 1 Under the following conditions the WHITE BALANCE function may not operate properly In such cases please select the AWC mode D When the object s surroundings have a very high colour temperature eg a clear sky and sunset 2 When the object s surroundings are dark 3 If the camera directly faces a fluorescent light or is installed in a place where there are considerable changes in illumination the WHITE BALANCE function may become unstable Digital Day amp Night Dome Camera N 18 19 Digital Day amp Night Dome Camera ii Camera Operation BLC Back Light Compensation AGC Auto Gain Control When there is a strong backlight behind the object clear images of the 1 Position the cursor to point to AGC on the SETUP menu by using
5. the background as well as the object can still be obtained by using the UP and DOWN buttons BACKLIGHT function 2 Select the value required by pressing the LEFT or RIGHT button As the 1 Position the cursor to point to BACKLIGHT on the SETUP menu by using level of gain increases the screen gets brighter but the level of noise will the UP and DOWN buttons also increase 2 Select the value required by pressing the LEFT or RIGHT button O HIGH The gain varies between the range of 6dB 42dB MIDDLE The gain varies between the range of 6dB 30dB SETUP LOW Thegain varies between the range of 6dB 18dB OFF The gain is fixed at 6dB LENS MANUAL SHUTTER ESC 4 WHITE BAL ATW DS b BACKLIGHT OFF LENS MANUAL AGC LOW 4 SHUTTER ESC 4 DNR LOW WHITE BAL ATW BACKLIGHT OFF b AGC LOW 4 HIGH The gain increases from OdB up to 42cB DNR LOW MIDDLE The gain increases from OdB up to 30dB O Ue MA LOW The gain increases from OdB up to 18dB e pr i QOFF BACKLIGHT function does not operate BACKLIGHT ON BACKLIGHT OFF Digital Day amp Night Dome Camera sa Ay Digital Day amp Night Dome Camera ii Camera Operation DNR Digital Noise Reduction The level of background noise in low light decreases automatically as the 1 Position the arrow to point to SENS UP on the SETUP menu by using the level of gain changes UP and DOWN buttons 1 Position the cursor
6. 4 Programmable Zone Operating Temperature Humidity 10 C 50 C 30 90 RH Digital Day amp Night Dome Camera N32
7. C MOTION DET PRIVACY MIRROR SHARPNESS RESET RETURN If the wrong name has been input Press the SET button after moving the cursor to CLR and all the letters will be erased If you want to correct a letter move the cursor to the arrow at the bottom left of the screen and press SET Position the cursor above the letter you wish to correct and then move the cursor onto the letter you wish to choose and press the SET button Digital Day amp Night Dome Camera Ne 25 Digital Day amp Night Dome Camera m Camera Operation 5 When the camera ID is complete select a position for the name to be displaved Y e When the AGC is turned off COLOR does not operate D Move the cursor onto POS and then press the SET button When an infrared light is used there may be a problem with focusing Camera ID ABCDEFGHIJKLM SYNC Two svchronisation modes are available INTERNAL and NOPQRSTUVWXYZ EXTERNAL LINE LOCK In LINE LOCK mode it synchronises the abcdefghijklm video signal between cameras without a synchronous generator nopgrstuvwxvz The line lock synchronisation is only used in areas of 60Hz 0123456789 NTSC Models 50Hz PAL Models GAS SET RAW gt O SBD INT Internal svnchronisation LL External line lock synchronisation E If LL is selected it can be adjusted to the desired phase FRONT DOOR Press the SET button Adjust to the desired phase from 0 to 359 2 The ID will appear i
8. essary adjust the brightness level COLOR mode is not Check if the AGC menu is set to the OFF ERNA position There is a problem with Cheki T T E ETE eNe complies with the manufacturer s e uneton is noi solo i a io totandbeek stipes ating Check for ground ops Check if the SHUTTER menu is set to Digital Day amp Night Dome Camera kt 37 Digital Day amp Night Dome Camera E Specifications ITEM NTSC PAL Power Source AC24V DC12V DC12V AC24V DC12V DC12V PimA ACOVOSQmA DCIQ 160mA 25mA ACAVyDSOmADCIV 160mA Total Pixels 811 H x 508 V 795 H x 596 V c Effective Pixels 768 H x 494 V 752 H x 582 V p Size 1 3 inch interline transfer CCD Scanning System 2 1 Interlace S n INT LL Selectable INT LL Selectable y Synchronization INT MA n 0 359 Adjustable 0 359 Adjustable c Horizontal 15 625 KHz Vertical 50 00 Hz Resolution 540 TV Lines Video Output 1 0Vp 0 75 Video 0 714Vp p Sync 0 286V p 1 0Vp p 75 Video 0 7 Vp p Sync 0 3 Vp p S N Y signal 50dB AGC Off E Min Illumination 0 3Lux F1 2 Color 0 1Lux F1 2 B W 0 002Lux Sens up E Gain Control OFF LOW MIDDLE HIGH White Balance ATW AWC MANUAL 1 800 K 10 500 K Electronic Shutter Speed AUTO MANUAL 1 60 1 120 000 AUTO MANUAL 1 50 1 120 000 C Sens Up OFF AUTO t 05D Built in Motion Detection ON OFF 4 Programmable Zone DNR OFF LOW MIDDLE HIGH Noise Reduction Mirror Built in Horizontal Image Inversion Privacy Function ON OFF
9. m physical shocks Vay E Em m It can cause malfunctions to occur It can damage the CCD Do not expose the camera to rain Do not expose the camera to or spill beverage on it radioactivity WW An OD If it gets wet wipe it dry immediately If exposed to radioactivity the CCD Liquids can contain minerals that will fail corrode the electronic components If the camera is exposed to spotlight or object reflecting strong light smear or blooming may occur Please check that the power satisfies the normal specification before connecting the camera _ Digital Day amp Night Dome Camera E Components Names and Functions of Parts B 1 COLOR DOME CAMERA DAGOREWST C 3 WIRE FOR VBS EXTRA a 4 INSTRUCTION GUIDE eee Digital Day amp Night Dome Camera 8_ 9 Digital Day amp Night Dome Camera E Names and Functions of Parts Names and Functions of Parts Bil LENS Vari Focal DC Auto Iris Lens 3 VBS EXTRA FOR CONNECTING TO LCD 2 5mm 6 0mm F1 2 3 8mm 9 5mm F1 2 Please use the supplied wire when connecting to LCD 2 9mm 10 0mm F1 2 4 0mm 9 0mm F1 5 BS VBS EXTRA 42 3 AXIS BRACKET Please loosen screws and fix tilted and panned position unit mm 5 SMPS PCB FOR DUAL POWER 2 OSD PCB Dimensions E unit mm e SET button Used for the menu display This button can be used to confirm setting
10. me Camera il Camera Operation B Menu B Settings SETUP menu Settings can be made using the 5 buttons located in the camera LENS selection e MANUAL DC aid t speed control Pes TUNES Acre WHITE BALANCE control e ATW e AWC e MANUAL BACKLIGHT e OFF e LOW e MIDDLE Backlight Compensation e HIGH AGC Auto Gain Control e OFF e LOW e MIDDLE e HIGH 1 Press the SET button DNR OFF LOW MIDDLE e Settings can now be made The SETUP menu is displayed on the monitor Digital Noise Reduction e HIGH SETUP SENS UP Low illuminance OFF e AUTO SPECIAL e CAMERAID COLOR SHUTTER ESC 4 e SYNC e MOTION DETECTION WHITE BAL ATW e PRIVACY MIRROR EY CUS ERAT EE e SHARPNESS RESET AGC LOWA e RETURN DNR LOW SENS UP OFF SPECIAL 4 EXIT OF 2 Select a menu item from the list available by using the UP and DOWN buttons e The cursor can be moved up or down by using the UP and DOWN buttons Position the cursor to point to the function requiring adjsutment Digital Day amp Night Dome Camera ka me Digital Day amp Night Dome Camera Mm Camera Operation MANUAL Manual Lens selection SETUP Select any function you gt LENS MANUAL Modes can be changed Q DC Auto Iris Lens selection wish to operate by SHUTTER ESC using the LEFT and using the UP and WHITE BAL ATW RIGHT buttons DOWN buttons BACKLIGHT OFF AGC LOW 4d DNR LOW SENS UP OFF The brightness of the screen can be adjusted in DC mode The b
11. mode for the chosen area e Please adjust the size of the area to be observed by using the UP DOWN LEFT or RIGHT button MOTION DETECTION P AREA SEL AREA STATE TOP DOWN LEFT RIGHT Press SET to Return Please press the SET button to save the changes and complete the setting Q PRIVACY This mode conceals the areas you do not wish to appear on the screen OFF Cancels the PRIVACY mode ON Operates the PRIVACY mode Please press the SET button PRIVACY P AREA SEL AREA1 AREA STATE ON AREA TONE TOP mmm DOWN LEFT RIGHT Press SET to Return Digital Day amp Night Dome Camera N 28 Please select the area you do not wish to appear from the 4 areas in AREA SEL mode e Please select ON mode for the chosen area Please adjust the size of the area to be concealed by using the UP DOWN LEFT or RIGHT button MIRROR ON Sets a horizontal image inversion OFF Cancels the inversion MIRROR ON MIRROR OFF Q SHARPNESS The outline of the video image becomes cleaner and more distinctive as the level of SHARPNESS increases If the level goes up excessively however it may affect the video image and generate noise Please press the SETUP button SHARPNESS gt LEVEL Jr Press SET to Return The available range of level is 0 31 Q RESET Returns to the level which was set by the manufacturer fo
12. n the top left 7 corner 8 Select the position where the ID is to be displaved bv using the 4 directional buttons and then press the SET button Press SET to Return 6 Select END and press the SET button to complete ID input COLOR Y When the mains frequency is 50Hz the line lock mode NTSC Models cannot be used When the mains frequency is 60Hz the line lock mode PAL Models cannot be used AUTO This camera has an IR Cut Filter and automatically changes to the appropriate mode dependant on lighting levels COLOR mode is selected during daylight and B W mode at night time ON The color mode is selected by default and the modes do not change automatically Digital Day amp Night Dome Camera N26 2 Digital Day amp Night Dome Camera m Camera Operation MOTION DETECTION This product has a feature that allows you to observe movements of objects in 4 different areas on the screen and the words MOTION DETECTED appear on the screen when movement is detected hence a single individual can conduct supervision efficiently The camera detects an object s movement by sensing disparity of outline and level of brightness and color Please press the SET button OFF MOTION DETECTION mode is cancelled ON Any motion in the selected areas is observed Please select the area you wish to observe from the 4 areas in AREA SEL mode Please select ON
13. r shipment Q RETURN Saves the SPECIAL menu and returns to the SETUP menu EXIT Saves all the setting menus and then exits 29 Digital Day amp Night Dome Camera E Troubleshooting If there are problems with the camera operation check the tables below If the problem persists please contact the agent who supplied the product FURS SES Troubleshooting The MOTION Check if MOTION DETECTION mode is Problems Troubleshooting DETECTION function is turned on IN ju L Check the setting of the MD AREA Nothing appears on the Check the power connection setet Check the video signal line connection i Check the WHITE BAL setting Colors are not quite Please refer to page 19 right The video image is not Make sure that the lens is clean l Check if the camera is facing directly into Clear Clean the lens with a clean lint free cloth or ThE SG ISE sunlight or fluorescent light brush flickering Adjust the contrast control on the monitor e Make sure that the screen is not exposed directly to a bright light Re position the camera if necessary nn Have you connected your camera to DC power L L mode isn t able to source Connect it to AC power source be selected The screen is dark Adjust the contrast control of the monitor TEM Check the frequency of power supply e If there is an intermediate device set the75ohm ibid Is not 60Hz for NTSC 50Hz for PAL Hi z correctly and also check the connections If nec
14. rightness ADE eLa can be adjusted within the range of 1 70 The optimum level of brightness aan A for the user can be achieved bv adjustment If you select the MANUAL mode it can be adjusted in ESC mode 3 When the LEFT or RIGHT button is pressed available values and modes are displayed in order Keep pressing the button until you get to the mode you wish to select 4 Select EXIT and then press the SET button to exit the set up Menu cm PBRIGHTNESS pnus 25 If appears at the mode you wish to operate it means that there is a Press SET to Return sub menu which can be selected by pressing the SET button If appears at the mode item it means that there is no mode available to be selected LENS selection This function is used to adjust the brightness of the screen 3 Press the SET button if you wish to return to the previous menu 1 When the SETUP menu is displayed on the screen position the cursor to point to LENS by using the UP and DOWN buttons 2 Select the type of the lens setting to use by pressing the LEFT or RIGHT button SETUP gt LENS DC SHUTTER Td WHITE BAL ATW BACKLIGHT OFF Digital Day amp Night Dome Camera M A Digital Day amp Night Dome Camera IN Camera Operation SHUTTER condition and speed control Auto or manual control can be selected 1 When the SETUP menu is on the screen position the cursor to point to SHUTTER by using the UP and DOWN button
15. s 2 Select the shutter mode by pressing the LEFT or RIGHT button G FLK Select FLK mode when flickering occurs on the screen due to an imbalance between illumination and frequency NTSC Model 1 100 PAL Model 1 120 e ESC Auto control of the shutter speed is enabled When ESC mode is on the shutter speed is controlled automatically according to the brightness of the scene MANUAL The shutter speed can be controlled manually SETUP LENS MANUAL gt SHUTTER ESC 4 WHITEBAL ATW BACKLIGHT OFF 3 Select MANUAL mode for manual shutter speed adjustment e Selectable speeds are from 1 60 to 1 120 000 sec NTSC and 61 50 to 1 120 000 sec PAL 4 Press the SET button when the settings are completed e While using the internal synchronous system if the shutter setting is on ESC and the camera is directly facing bright fluorescent lights the image on the screen can be adversely affected therefore choose the installation location carefully When MANUAL mode is on the SENS UP function cannot be used WHITE BALANCE control The screen colours can be adjusted using the WHITE BALANCE function 1 Position the cursor to point to WHITE BAL on the SETUP menu by using the UP and DOWN buttons 2 Select the mode you wish to adjust by pressing the LEFT or RIGHT buttons SETUP LENS MANUAL SHUTTER ESCA gt WHITE BAL ATW BACKLIGHT OFF X Select one of the 3 modes below ATW Auto Tracking White Balance
16. s E E E 10 BLC Back Light Compensation 89 OS i Pa AE AGC Auto Galli Control eii peta rait ttn iein a 21 m VES EX RA E M E 11 DNR Digital Noise Reduction o 22 E 3 AXiS BIACKET ose terii se teadesobsisdus t eiogseddassi debes edid anin 11 e SENS UP ooo mee eee eee 23 E MPS e REED 11 SPECIAL o A DIRS m EXIT E M e DO Installation IX LLL Bob B BORORJEI bigE E hiai 1 2 Troubleshooting MA E E See Lac EA O 30 Cable Connections Je Pat ta dicted EE l nek rte 13 Specification Be A st EE 39 Digital Day amp Night Dome Camera oe Digital Day amp Night Dome Camera B Precautions Do not install the camera in extreme temperature conditions Only use the camera under conditions where temperatures are between 10 C and 50 C Be especially careful to provide ventilation when operating under high temperatures Do not install the camera under unstable lighting conditions pe TERN X Severe lighting change or flicker can cause the camera to work improperly Do not install or use the camera in an environment where the humidity is high It can cause the image quality to be poor Do not touch the front lens of the camera ga ev KU This is one of the most important parts of the camera Be careful not to leave fingerprints on the lens cover Digital Day amp Night Dome Camera N Never keep the camera pointed directly at strong light Do not drop the camera or protect it fro
17. s after changing the value of the selected function or current conditions UP 8 DOWN buttons Used for selecting items by moving the cursor up or down on the menu screen LEFT 8 RIGHT buttons Used when changing item values by moving the cursor to the left or right on the menu screen Digital Day amp Night Dome Camera ND NU Digital Day amp Night Dome Camera E Installation Dome Base Mounting Open the dome cover by loosening 3 screws using special wrench provided Mount the base of camera to a sturdy surface using 4 screws 1 5 inch and 4 premade holes on the base of the dome BACK HOUSING 2 Power Connect amp Monitor Impedance DC12V 300mA regulated power supply DC12V only AC24V Class 2 power supply AC24V DC12V To avoid fire or shock hazard must use a UL listed power supply Set the monitor impedance switch to 750 Check the impedance switch when the screen turns blurred 3 Camera Module Adjustment screw housing Loosen screws for 3 axis camera bracket and adjust the direction BOT and angle of camera Make sure to retighten the screws for camera bracket Set any function you wish to activate by using the OSD buttons HOLDER WINDOW 4 Dome Cover Mounting Replace the dome cover to the base and tighten 3 screws WINDOW Cable Connections BH DC only AC24V DC12V AC IN AC IN DC IN DC IN Digital Day amp Night Dome Camera ae d Digital Day amp Night Do
18. to point to DNR on the SETUP menu by using the 2 Select the value required by pressing the LEFT or RIGHT button UP and DOWN buttons O AUTO Low light level automatic mode 2 Select the value required by pressing the LEFT or RIGHT button OFF The function does not operate SETUP ae aa nm When SHUTTER is in the manual or flk mode SENS UP does not operate When AGC is turned off SENS UP does not operate WHITE BAL ATW BACKLIGHT OFF AGC LOW 4 SETUP gt DNR LOW LENS MANUAL SENS UP OFF SHUTTER ESC 4 SPECIAL WHITE BAL ATW BACKLIGHT OFF QOFF There is no reduction in noise level AGC LOW 4 QLOW There is a small reduction in noise level with almost no DNR LOW ghost image gt SENS UP OFF MIDDLE The most effective mode There is a sufficient reduction in SPECIAL noise levels without causing significant ghosting EXIT y HIGH The level of noise is reduced greatly however there is an increase in ghosting 3 Press the SET button when all the settings are complete Q 3 When AGC is turned off DNR d i The maximum storage magnification in low light level movement situations an a ai Drees an can be adjusted by pressing the SET button in AUTO mode X2 X128 As the magnification increases the screen gets brighter however the after l image also increases SENS UP Low Illuminance If storage magnification is increased while SENS UP is operational it may cause noise and spots may appear this is normal
Download Pdf Manuals
Related Search