Pelco C2410M-J User's Manual
Contents
1. Spain Sweden United Arab Emirates United Kingdom United States2. The ICS150 Series Camclosure can be installed directly to a wall ceiling 4S electrical box using the optional ICS150 adapter plate or a ceiling tile Installation INSTALL B ACK BOX MOUNTING DIRECTLY TO A WALL OR CEILING 1 Cut a hole 3 5 inches 9 cm in diameter in the FPS aN ceiling or wall using the adapter plate as a FANON CY WALL OR uag MOUNTING ene 2 Connect the video cable HARDWARE N NOT SUPPLIED IM 3 Connect the power wires E BACK BOX For 12 VDC connect the 24 VAC 12 VDC red and GND black wires to input power The MOUNTING DIRECTLY TO blue wire is not used WALL OR CEILING For 24 VAC connect the 24 VAC 12 VDC red and 24 VAC blue wires to input power The black wire is not used 4 Attach the back box to the wall or ceiling MOUNTING TO 4S DEEP ELECTRICAL BOX 4S DEEP 1 Attach the adapter plate to the 4S box ELECTRICAL with the two 8 32 x 0 750 inch screws a NO C O supplied AY WA 2 Connect the video cable snk eo CEILING 7 SUPPLIED 3 Connect the power wires ADAPIER LATE e Eor 12 VDC connect the 24 VAC ack Box 12 VDC red and GND black oessa 1 1 A SUPPLIED wires to input power The blue MOUNTING TO 4S DEEP ELECTRICAL BOX wire is not used For 24 VAC connect the 24 VAC 12 VDC red and 24 VAC blue wires to input power The black wire is not used 4 Attach the back box to the adapter plate with the four 8 32 x 0 37
3. lamp and color wheel will be covered for a period of 90 days The air filter is not covered under warranty e Two years on Intelli M elDC controllers e One year except video heads on video cassette recorders VCRs Video heads will be covered for a period of six months e Six months on all pan and tilts scanners or preset lenses used in continuous motion applications preset scan tour and auto scan modes Pelco will warrant all replacement parts and repairs for 90 days from the date of Pelco shipment All goods requiring warranty repair shall be sent freight prepaid to a Pelco designated location Repairs made necessary by reason of misuse alteration normal wear or accident are not covered under this warranty Pelco assumes no risk and shall be subject to no liability for damages or loss resulting from the specific use or application made of the Products Pelco s liability for any claim whether based on breach of contract negligence infringement of any rights of any party or product liability relating to the Products shall not exceed the price paid by the Dealer to Pelco for such Products In no event will Pelco be liable for any special incidental or consequential damages including loss of use loss of profit and claims of third parties however caused whether by the negligence of Pelco or otherwise The above warranty provides the Dealer with specific legal rights The Dealer may also have additional right
4. the manufacturer s instructions Do not install near any heat sources such as radiators heat registers stoves or other apparatus Use only with the cart stand tripod bracket or table specified by the manufacturer or sold with the apparatus When a cart is used use caution when moving the cart apparatus combination to avoid Refer all servicing to qualified service personnel Servicing is required when the apparatus has been damaged in any way such as power supply cord or plug is damaged liquid has been spilled or he apparatus the apparatus has been exposed to rain or moisture does not Installation should be done only by qualified personnel and conform to all local codes ically marked as a NEMA Type 3 3R 3S 4 4X 6 or 6P enclosure it is designed for indoor use only and it must not be installed where exposed to rain and moisture hods and materials capable of supporting four times the maximum ng instructions are for use by qualified service personnel only To reduce do not perform any servicing other that contained in the operating 1 Read these instructions 2 Keep these instructions 3 Heed all warnings 4 Follow all instructions 5 6 including amplifiers that produce heat 7 Only use attachments accessories specified by the manufacturer 8 injury from tip over 9 objects have fallen into operate normally or has been dropped 10 11 Unless the unit is specif 12 Use only installation me specifi
5. 5 inch screws supplied C2410M J 2 08 MOUNTING TO CEILING TILE oes ADAPTER PLATE Remove the ceiling tile FA Using the adapter plate as a template cut x a hole 3 5 inches 9 cm in diameter in the i SOS ceiling tile for the back box Punch four screw holes in the ceiling tile I 8 32 X 1 25 i i lina fi MOUNTING E Attach the bac box to the ceiling tile and HARDWARE BACK BOX adapter plate with the four 8 32 x 1 25 inch suppuien ji aN MOUNTING TO CEILING TILE Replace the ceiling tile Remove an adjacent ceiling tile and connect the video cable Connect the power wires For 12 VDC connect the 24 VAC 12 VDC red and GND black wires to input power The blue wire is not used For 24 VAC connect the 24 VAC 12 VDC red and 24 VAC blue wires to input power The black wire is not used INSTALL CAMERA 1 WARNING Heater elements could be hot When camera power is on use caution when adjusting the camera This applies to all models Some indoor installations do not require a heater If the installation does not require a heater remove the heater board from the camera assembly To remove the heater apply pressure and press on the corner of the board 12 VDC Operation Only The camera is set for 24 VAC operation at the factory For 12 VDC operation remove the jumper from the 24 VAC position and install it on the 12 VDC position VIDEO CONNECTOR HEATER CONN
6. ECTOR 24 VAC JUMPER 12 VDC JUMPER C2410M J 2 08 3 If the heater is installed plug the heater connector from the camera into the mating connector inside the base Plug the video connector from the camera into the mating connector inside the base Turn on power to the camera and monitor VIDEO CONNECTOR CONNECTOR 4 Always make sure the tab on the camera bracket is pointing out of the enclosure away from the ceiling or wall Gently squeeze the bracket place it against the shoulder inside the back box and then gently release Proper camera orientation CAMERA BRACKET TAB ALWAYS POINTS OUT OF THE ENCLOSURE SUP HE CAMERA CAMERA BRACKET TAB ALWAYS POINTS OUT OF THE ENCLOSURE Ceiling Mounting The camera bracket tab Wall Mounting The camera bracket tab points out of the enclosure and the top of the points out of the enclosure and the top of the camera is pointed in the opposite direction camera points up towards the tab INSTALL DOME AND TRIM RING Place the trim ring and dome over the back box If the dome has a liner position the viewing window over the lens of the camera Tighten the tamper resistant screws with the supplied 1 8 inch hollow screwdriver bit NOTE The screws are installed at an angle C2410M J 2 08 7 Adjustments The camera is set up at the factory and normally requires no adjustments Sometimes however adjustments may be necessary 1 Remove the dom
7. INSTALLATION 150 Series Camclosure Integrated Camera System In Ceiling Mount 2410M J 2 08 Contents important Safety Instructions ch eee opted Sn a R 3 Regulatory Notices saena ance bee tn and ode TAN EA den ween PEK REA TATEK T 4 Descriptions Aa eh Li dace eda eh cee RE ced ne eo as Gale un ba KDN Ta da 5 Installations eee kee Sak eel ee aT ain oY Mat ae eM Soe thn soi ee dl tees Mla ie 5 Install Back BOK as ne en aon eens ee seed eek ee ees ae gece Eri 5 Mounting Directly to a Wall or Ceiling 5 Mounting to 4S Deep Electrical Box 5 Mounting to Ceiling Ml 54 reZ pe Ea 2 Tere ova pe eens a ben mendes 6 Install Gamera 2 5 de ZZ a none Rae tale dr Re aN REKA ne ah oe 6 Install Dome and Trim Bing nanunua oana aaeeea earannan erroen 7 Adjustments 244284 ue ecco lad ce nude ote ASMA 9 Pate Ode SDA Le eee Ae nee oa a a 8 Vertical Phase 24 VAC Operation Only 8 Switch Settings for Fixed Focal Length Lens Without Auto Iris 8 SPeciiICAtlONS sev goss fe eee tee ea need tags pe eae en ZEA She Gad awe ss ote 9 G n raliste dns leds heb 4 ar nd a eh de dr ele AAE 9 Electrical sateco N CAT a a ae AL Gris See E A E mea tee eee Ae 9 2 CxxxxM xx 08 Important Safety Instructions Do not block any ventilation openings Install in accordance with
8. WARRANTY AND RETURN INFORMATION WARRANTY Pelco will repair or replace without charge any merchandise proved defective in material or workmanship for a period of one year after the date of shipment Exceptions to this warranty are as noted below e Five years on fiber optic products and TW3000 Series unshielded twisted pair UTP transmission products e Three years on Spectra IV products e Three years on Genex Series products multiplexers server and keyboard e Three years on DX Series digital video recorders DVR5100 Series digital video recorders DigitalSENTRY Series hardware products DVX Series igital video recorders NVR300 Series network video recorders and Endura Series distributed network based video products e Three years on Camclosure and Pelco branded fixed camera models except the CC3701H 2 CC3701H 2X CC3751H 2 CC3651H 2X MC3651H 2 and MC3651H 2X camera models which have a five year warranty e Three years on PMCL200 300 400 Series LCD monitors e Two years on standard motorized or fixed focal length lenses e Two years on Legacy CM6700 CM6800 CM9700 Series matrix and DF5 DF8 Series fixed dome products e Two years on Spectra III Spectra Mini Esprit ExSite and PS20 scanners including when used in continuous motion applications e Two years on Esprit and WW5700 Series window wiper excluding wiper blades e Two years except lamp and color wheel on Digital Light Processing DLP displays The
9. d 3 9 e Auto backlight compensation BLC switch OFF ON ABL switch ON x 3 x E OFF 5 e Manual backlight compensation BLC switch ON ABL switch OFF 9 abt Hl SWITCH POSITION 8 C2410M J 2 08 Green Specifications GENERAL Operating Temperature Pan Tilt Adjustment Construction Finish Dimensions Environment Weight ELECTRICAL Input Voltage Power Consumption Video Connector 50 to 122 F 46 to 50 C De ices to 25 F 4 C Manual 360 pan 180 tilt Aluminum with steel camera mounting bracket and polycarbonate dome White polyester powder coat trim ring with charcoal gray back box Refer to dimension drawing below Low temperature indoor outdoor suitable for use in environmental air handling spaces 1 70 Ib 0 77 kg 12 VDC or 24 VAC 10 13 W or less BNC Design and product specifications subject to change without notice 5 48 13 92 rs 3 50 8 89 Ra NOTE VALUES IN PARENTHESES ARE CENTIMETERS ALL OTHERS ARE INCHES The materials used in the manufacture of this document and its components are compliant to the requirements of Directive 2002 95 EC z this equipment C2410M J 2 08 This equipment contains electrical or electronic components that must be recycled properly to comply with Directive 2002 96 EC of the European Union regarding the disposal of waste electrical and electronic equipment WEEE Contact your local dealer for procedures for recycling PRODUCT
10. e and trim ring using the supplied 1 8 inch hollow screwdriver bit 2 Adjust the vertical phase focus or switch settings refer to the following procedures 3 Replace the dome and trim ring VERTICAL PHASE 24 VAC OPERATION ONLY Adjustment is required if there is vertical roll when switching between two cameras 1 Reverse the 24 VAC connections on one camera If both cameras are connected to the same transformer this should solve the problem 2 If reversing the connections does not solve the problem or if cameras are connected to different transformers turn the adjustment screw on one camera while switching as rapidly as possible between the two camera views until the switching is clean and there is no vertical roll If more than two cameras are out of synchronization with each other choose one camera and synchronize all others to it VERTICAL PHASE ADJUSTMENT SWITCH SETTINGS FOR FIXED FOCAL LENGTH LENS WITHOUT AUTO IRIS Refer to the switch drawing The switch is located next to the lens Automatic backlight compensation factory setting is used under varying lighting conditions such as outdoors or fixed lighting conditions where there are no bright spots that darken other picture details Manual backlight compensation is used in fixed lighting conditions to optimize the picture detail when there are bright spots e ALC ELC switch Always ELC FACTORY SETTINGS e Y DC switch Not use
11. ed load 3 CAUTION These servici the risk of electric shock instructions unless you are qualified to do so 4 Only use replacement parts recommended by Pelco The product and or manual may bear the following marks This symbol indicates this unit This symbol indicates operating and maintenance instructions in the that dangerous voltage constituting a risk of electric shock is present within CAUTION RISK OF ELECTRIC SHOCK that there are important DO NOT OPEN literature accompanying this unit C2410M J 2 08 Regulatory Notices This device complies with Part 15 of the FCC Rules Operation is subject to the following two conditions 1 this device may not cause harmful interference and 2 this device must accept any interference received including interference that may cause undesired operation Radio and Television Interference This equipment has been tested and found to comply with the limits of a Class B digital device pursuant to Part 15 of the FCC Rules These limits are designed to provide reasonable protection against harmful interference in a residential installation This equipment generates uses and can radiate radio frequency energy and if not installed and used in accordance with the instructions may cause harmful interference to radio communications However there is no guarantee that the interference will not occur in a particular installation If this equipment does cause harmful interfere
12. ents Incorporated REVISION HISTORY Manual C24 C24 C24 C24 C24 C24 C24 C24 C24 C24 C24 C24 0 2 2 GG G G C2410 o nd ox H J J 2 08 Date 11 99 1 00 1 00 7 00 1 01 7 01 7 02 5 03 1 04 10 05 1 06 2 08 Comments Original version Revised instal ation instructions Added FCC notices Added varifocal lens Changed format Added information on dome liner Added heater element caution Camera modu Added instruc Revised Instal e redesigned reference ECO 1 7054 7055 7056 ions for fixed lens with auto iris ation instructions bracket and camera assembled at factory Added iris level adjustment for fixed lens with auto iris Added to certi spaces ications that all models are suitable for use in environmental air handling Revised drawings showing vertical phase and iris level adjustments Revised switch setting descriptions for varifocal lens Added WEEE statement Updated factory switch settings for varifocal lens Updated wiring information Revised manual for standard resolution color cameras with fixed focus lenses PELCO Worldwide Headquarters 3500 Pelco Way Clovis California 93612 USA USA amp Canada Tel 800 289 9100 Fax 800 289 9150 International Tel 1 559 292 1981 Fax 1 559 348 1120 www pelco com 1S09001 Australia Finland France Germany Italy Macau The Netherlands Russia Singapore South Africa
13. nce to radio or television reception which can be determined by turning the equipment off and on the user is encouraged to try to correct the interference by one or more of the following measures e _ Reorient or relocate the receiving antenna N Increase the separation between the equipment and the receiver e Connect the equipment into an outlet on a circuit different from that to which the receiver is connected N Consult the dealer or an experienced radio TV technician for help You may also find helpful the following booklet prepared by the FCC How to Identify and Resolve Radio TV Interference Problems This booklet is available from the U S Government Printing Office Washington D C 20402 Changes and Modifications not expressly approved by the manufacturer or registrant of this equipment can void your authority to operate this equipment under Federal Communications Commission s rules This Class B digital apparatus complies with Canadian ICES 003 Cet appareil num rique de la classe B est conforme a la norme NMB 003 du Canada 4 C2410M J 2 08 Description The 150 Series Camclosure integrated camera system is an in ceiling dome incorporating a camera and lens package into a small discreet high security enclosure designed for areas subject to heavy vandalism The system is perfect for a variety of indoor and outdoor applications and its versatile design allows for multiple mounting options
14. s which are subject to variation from state to state If a warranty repair is required the Dealer must contact Pelco at 800 289 9100 or 559 292 1981 to obtain a Repair Authorization number RA and provide the following information 1 Model and serial number 2 Date of shipment PO number sales order number or Pelco invoice number 3 Details of the defect or problem If there is a dispute regarding the warranty of a product that does not fall under the warranty conditions stated above please include a written explanation with the product when returned Method of return shipment shall be the same or equal to the method by which the item was received by Pelco RETURNS To expedite parts returned for repair or credit please call Pelco at 800 289 9100 or 559 292 1981 to obtain an authorization number CA number if returned for credit and RA number if returned for repair and designated return location All merchandise returned for credit may be subject to a 20 percent restocking and refurbishing charge Goods returned for repair or credit should be clearly identified with the assigned CA or RA number and freight should be prepaid 1 8 08 Pelco the Pelco logo Camclosure DigitalSENTRY Endura Esprit ExSite Genex Intelli M Legacy and Spectra are registered trademarks of Pelco Inc Spectra Ill is a trademark of Pelco Inc Copyright 2008 Pelco Inc All rights reserved DLP is a registered trademark of Texas Instrum
Download Pdf Manuals
Related Search