Panasonic WV-SP509 Installation Guide
Contents
1. Mounting screws For mounting on ceiling Tripod mount base Remove the tripod mount base on the top Safety wire plate of the camera for ceiling accessory Align the tripod mount base with the safety wire plate for ceiling accessory and attach them to the camera with the mounting screws IMPORTANT e Use the detached mounting screws to attach the tripod mount base When using different length screws it may damage the camera or cause the camera to fall Recommended tightening torque 0 39 N m 0 29 lbf ft Engage the safety wires with the wire engaging holes respectively Wire engaging hole Ne Safety wire accessory Pass the ring part of the safety wire through the wire engaging hole 21 For mounting on wall Put the tripod mount base on the bottom of the camera Secure the safety wire lug for wall accessory to the camera mount screw hole with the wire lug fixing screw accessory EE d Wire lug fixing IMPORTANT HE engaging ia screw accessory e Be sure to use the provided fixing screws for the safety wire lug and the removed Saey ere lug Aer or wa screws for the camera mount base Ge screw accessory When using different length screws it may damage the camera or cause the camera to fall Recommended tightening torque 0 39 N m 0 29 Ibf ft Leave these holes untouched a Mounting screws Aa Tripod mount base Engage the safety wire accessory with the wire2. Viewer Software Install About this software Please read first Note e Refer to Using the CD ROM in the Operating Instructions on the provided CD ROM for further information about CDLauncher Click the Run button next to IP Setting Software Panasonic IP Setting screen will be displayed Click the Network Settings button after select ing the MAC address IP address of the camera to be configured 29 30 Select the camera you want to configure and click Access Camera BH Panasonic IP Setting Lo Es Camera list About this program No MAC Address IPv4 Address Port No Camera Name Model IPv4 overlap Search Network Settings IPv4 IPv6 IPv4 sl Close Note e When cameras are displayed in Panasonic IP Setting screen click the camera with same MAC address as the MAC address printed on the camera that you want to configure If the installation screen of the viewer software Network Camera View 4S is displayed follow the instructions of the wizard to start the installation The viewer software is installed from the camera e The Live page will be displayed e If you cannot install the viewer software Network Camera View 4S or if images are not displayed click the Install button next to Viewer Software on the launcher window to install the software e Perform the Time amp date settings in the Setup Basic page before using the camera
3. Note When no image is displayed on the Live page refer to the Troubleshooting in the Operating Instructions on the provided CD ROM It is possible to enhance the network security by encrypting the access to cameras using the HTTPS function Refer to the Operating instructions on the provided CD ROM for how to con figure the HTTPS settings Click the Setup button on the Live page the user authentication window will be displayed Enter the default user name and password as follows and log in User name admin Password 12345 When changing settings related to the network settings such as connection mode IP address and subnet mask click the Network Settings button in IP Setting Software screen as shown in step 3 then change each setting Due to security enhancements in IP Setting Software Network settings of the camera to be configured cannot be changed when around 20 minutes have passed after turning on the power of the camera When the effective period is set to 20 min in the Easy IP Setup accommodate period However settings can be changed after 20 minutes for cameras in the initial set mode Network Camera Recorder with Viewer Software Lite which supports live monitoring and recording images from multiple cameras is available For further information refer to our web site http security panasonic com pss security support info htm Troubleshooting Before asking for rep
4. Operation of this equipment in a residential area is likely to cause harmful interference in which case the user will be required to correct the inter ference at his own expense FCC Caution To assure continued compliance example use only shielded interface cables when connecting to computer or peripheral devices Any changes or modifications not expressly approved by the party responsible for compliance could void the user s authority to operate this equipment For U S A The model number and serial number of this product may be found on the surface of the unit You should note the model number and serial number of this unit in the space provided and retain this book as a permanent record of your purchase to aid identification in the event of theft Model No Serial No For Europe We declare under our sole responsibility that the product to which this declaration relates is in conformity with the standard or other normative document following the provisions of Directive 2004 108 EC Wir erkl ren in alleiniger Verantwortung daf das Produkt auf das sich diese Erklarung bezieht mit der folgenden Norm oder normativen Dokument bereinstimmt Gem den Bestimmungen der Richtlinie 2004 108 EC Nous d clarons sous notre propre responsabilit que le produit auquel se r f re la pr sente d claration est conforme a la norme sp cifi e ou a tout autre document normatif conform ment
5. amplifiers that produce heat 9 Do not defeat the safety purpose of the polarized or grounding type plug A polarized plug has two blades with one wider than the other A grounding type plug has two blades and a third grounding prong The wide blade or the third prong are provided for your safety If the provided plug does not fit into your outlet consult an electrician for replacement of the obsolete outlet 10 Protect the power cord from being walked on or pinched particularly at plugs convenience receptacles and the point where they exit from the apparatus 11 Only use attachments accessories specified by the manufacturer 12 Use only with the cart stand tripod bracket or table specified by the manufacturer or sold with the apparatus When a cart is used use caution when moving the cart apparatus combi nation to avoid injury from tip over 13 Unplug this apparatus during lightning storms or when unused for long periods of time 14 Refer all servicing to qualified service personnel Servicing is required when the apparatus has been damaged in any way such as power supply cord or plug is damaged liquid has been spilled or objects have fallen into the apparatus the apparatus has been exposed to rain or moisture does not operate normally or has been dropped Limitation of liability THIS PUBLICATION IS PROVIDED AS IS WITHOUT WARRANTY OF ANY KIND EITHER EXPRESS OR IMPLIED INCLUDING BUT NOT LIMITED TO THE IMPLIED WA
6. aux dispositions de la directive 2004 108 CE Nosotros declaramos bajo nuestra Unica responsabilidad que el producto a que hace referencia esta declaraci n esta conforme con la norma u otro documento normativo siguiendo las estipulaciones de la directiva 2004 108 CE Noi dichiariamo sotto nostra esclusiva responsabilita che il prodotto a cui si riferisce la presente dichiarazione risulta conforme al seguente standard o altro documento normativo conforme alle disposizioni della direttiva 2004 108 CE Wij verklaren als enige aansprakelijke dat het product waarop deze verklaring betrekking heeft voldoet aan de volgende norm of ander normatief dokument overeenkomstig de bepalingen van Richtlijn 2004 108 EC Vi erkleerer os eneansvarlige for at dette produkt som denne deklaration omhandler er i overensstemmelse med standard eller andre normative dokumenter i folge bestemmelserne i direktiv 2004 108 EC Vi deklarerar harmed vart fulla ansvar f r att den produkt till vilken denna deklaration h nvisar ar i verensst mmelse med standarddokument eller annat normativt dokument som framst lls i direktiv 2004 108 EC llmoitamme yksinomaisella vastuullamme ett tuote jota t m ilmoitus koskee noudattaa seuraavaa standardia tai muuta ohjeellista asiakirjaa jotka noudattavat direktiivin 2004 108 EC s d ksi Vi erkl rer oss alene ansvarlige for at produktet som denne erkl ringen gjelder for er i overensstem
7. engaging hole Safety wire accessory Wire engaging hole LS j Pass the ring part of the safety wire 2 Pass the other end of the safety wire through the wire engaging hole through the ring part of the safety wire 22 Camera mounting The camera is mounted on the camera mount bracket locally procured and the safety wire is secured IMPORTANT e The installation area shall be strong enough to hold the camera and camera mount bracket e The camera mount bracket locally procured shall be mounted on the foundation part of the construction or a part with adequate strength e To prevent the mounting strength from becoming lower do not use wooden screws to secure the camera mount bracket locally procured Secure the camera mount bracket locally procured to an installation position and mount the camera on the camera mount bracket Prepare mounting screws according to the material of the area where the camera mount brack et is to be installed The installation method may be different depending on the material of the area where the bracket is to be installed e When installing on steel Fix with bolts and nuts M6 or M8 e When installing on concrete Fix with anchor bolts M6 or M8 The mounting conditions of the camera mount bracket locally procured are described as follows Installation Recommended Screw quantity Minimum pull out position screw strength per 1 pc On ceiling M6 or M8 3 pcs 19
8. kbps 4096 kbps 6144 kbps 8192 kbps 10240 kbps 12288 kbps 14336 kbps Frame rate 1 fps 3 fps 5 fps 7 5 fps 10 fps 12 fps 15 fps 20 fps 30 fps JPEG Image quality O SUPER FINE 1 FINE 2 3 4 5 NORMAL 6 7 8 9 LOW 10 steps 0 9 Transmission type PULL PUSH 0 1 fps 30 fps JPEG frame rate will be restricted when dis playing both JPEG and H 264 images 2 megapixel 16 9 H 264 MJPEG 1 3 megapixel 16 9 H 264 MJPEG 640x360 320x180 m 640x360 320x180 m 640x360 320x180 m ax 30 fps ax 30 fps ax 30 fps 640x360 320x180 m ax 30 fps 1 3 megapixel 4 3 H 264 VGA 640x480 QVGA 320x240 max 30 fps MJPEG VGA 640x480 QVGA 320x240 max 30 fps G 726 ADPCM 32 kbps 16 kbps G 711 64 kbps Unlimited 64 kbps 128 kbps 256 kbps 384 kbps 512 kbps 768 kbps 1024 kbps 2048 kbps 4096 kbps 8192 kbps IPv6 TCP IP UDP IP HTTP RTP FTP SMTP DNS NTP SNMP HTTPS DHCPv6 MLD ICMP ARP IPv4 TCP IP UDP IP HTTP RTSP RTP RTP RTCP FTP SMTP DHCP DNS DDNS NTP SNMP HTTPS UPnP IGMP ICMP ARP Microsoft Windows 7 Microsoft Windows Vista Microsoft Windows XP SP3 Windows Internet Explorer 9 0 82 bit Windows Internet Explorer 8 0 82 bit Windows Internet Explorer 7 0 82 bit Microsoft Internet Explorer 6 0 SP3 14 Depends on network conditions Alarm image transmission FTP periodic transmission When the FTP transmission is failed backup on an optio
9. power is turned on however it does not indi cate any malfunction When using 12 V DC power supply Loosen the screw of the power cord plug accessory Connect the cable of the 12 V DC power supply to the power cord plug Strip 3 mm to 7 mm 1 8 inches to 9 32 inches from the end of the wire and twist the stripped part of the wire sufficiently to avoid short circuit Specification of cable wire 16 AWG 24 AWG power supply Single core twisted This illustration represents WV SP509 e Check whether the stripped part of the wire is not exposed and is securely connected Tighten the screw of the power cord plug Recommended tightening torque 0 34 N m 0 25 Ibf ft Connect the power cord plug to the 12 V DC power sup ply terminal on the rear of the camera ONLY CONNECT 12 V DC CLASS 2 POWER SUPPLY UL 13810 CSA 223 or LIMITED POWER SOURCE ECH EN UL CSA 60950 1 12 V DC power cord plug accessory IMPORTANT e Be sure to use the power cord plug provided with this product e Be sure to fully insert the power cord plug into the 12 V DC power supply terminal Otherwise it may damage the camera or cause malfunction e When installing the camera make sure that excessive force is not applied to the power cable e Be sure to use an AC adaptor compliant with the Specifications regarding power source and power consumption Is page 32 27 28 When using PoE IEEE802 3
10. selected by default It is possible to determine whether or not to receive input from EXT WO terminal 2 and 3 ALARM IN2 3 by selecting Off Alarm input Alarm output or AUX output for Terminal 2 or Terminal 3 on the Alarm tab on the Alarm page Refer to the Operating Instructions includ ed in the CD ROM for further information e Connect an external device with verifying that the ratings are within the specifications above e When using the EXT I O terminals as the output terminals ensure they do not cause signal collision with external signals lt Ratings gt e ALARM OUT AUX OUT Output specification Open collector output maximum applied voltage 20 V DC Open 4 V 5 V DC by internal pull up Close Output voltage 1 V DC or less 50 mA or less e ALARM IN DAY NIGHT IN Input specification No voltage make contact input 4 V 5 V DC internally pulled up OFF Open or 4V 5 VDC ON Make contact with GND required drive current 1 mA or more DAY NIGHT IN is only for WV SP509 Connect a LAN cable category 5 or better STP to the network connector on the rear of the camera For Europe LAN cable A uenen ra S eegend ALARMIN AUX OUT LALARMIN ALARM OUT This illustration represents WV SP509 D Connect the power supply IMPORTANT e The 12 V DC power supply shall be insulated from the commercial AC power e The operating sound might be heard when the
11. such as seashores e Locations where the temperature is not within the specified range page 32 e Locations subject to vibrations This prod uct is not designed for on vehicle use e Locations subject to condensation as the result of severe changes in temperature Be sure to remove this product if it is not in use Shielded STP LAN cables must be used with this unit to ensure compliance with EMC standards For Europe Before installation e When this camera and camera mount bracket are mounted on a ceiling or a wall use the screws described on page 23 The screws to be used are not provided Prepare the screws according to the mate rial structure strength and other factors of the mounting area and the total weight of objects to be mounted e Ensure that the mounting surface anchor and screws are sufficiently strong e Do not mount this product on a plaster board or a wooden section because they are too weak If this product is unavoidably mounted on such a section the section shall be sufficiently reinforced About the network connection When connecting to a network using the net work cable of this product observe the follow ing e When wiring for the network design and engineer not to be affected by thunder Screw tightening e The screws and bolts must be tightened with an appropriate tightening torque according to the material and strength of the installation area e Do not use an i
12. 6 N 44 06 Ibf On wall M8 4 pcs 921 N 207 05 Ibf IMPORTANT e Refer to the operating instructions of the camera mount bracket locally procured pa J gt for the mounting angle of the camera mount bracket for a ceiling or wall e When the camera mount bracket is mount ed on a wall be sure to observe the mounting height described on the illustra tion 2m 90 cm 9 5 feet _ _ or more Secure the safety wire to the foundation part of the construction or a part with adequate strength minimum pull out strength 196 N 44 06 lbf Prepare the fixing screw according to the material of the area where the safety wire is to be fixed 23 IMPORTANT e The safety wire shall be adjusted to remove slack e Be sure to install the safety wire to prevent a fall of the camera resulting in injury or accidents in case the camera comes off e To prevent the mounting strength from becoming lower do not use wooden screws to secure the safety wire lt For mounting on ceiling gt rb Washer accessory Spring washer accessory Recommended screw M4 Minimum pull out strength 196 N 44 06 Ibf Safety wire accessory Recommended screw M4 Minimum pull out strength 196 N 44 06 Ibf Safety wire lt For mounting on wall gt Recommended screw M6 Minimum pull out strength 196 N 44 06 Ibf Safety wire Z Foundation part of construction or part with adequate strength 24 lt Mounting sample
13. ATA FOR SOME REASON BECOMES PUBLIC OR IS USED FOR ANY PURPOS 7 LOSS OF REGISTERED DATA CAUSED BY ANY FAILURE The network camera WV SP509 WV SP508 is designed to operate using a PC on a network 10BASE T 100BASE TX By connecting to a network LAN or the Internet images and audio from the camera can be moni tored on a PC via a network 3 Note e lt is necessary to configure the network settings of the PC and its network environment to monitor images from the camera on the PC It is also necessary to install a web browser on the PC About notations The following notations are used when describing the functions limited for specified models The functions without the notations are supported by all models The functions with this notation are available when using the model WV SP509 The functions with this notation are available when using the model WV SP508 H 264 and JPEG triple encoding H 264 dual stream output and JPEG output can be simultaneously provided H 264 stream1 1920x1080 max 30 fps H 264 stream2 640x360 max 30 fps Cropping function the function of cutting out the image capture area At the same time as providing the whole image it is possible to provide the part cut out from whole image Up to 4 image capture areas can be specified and it is also po
14. Panasonic Installation Guide Included Installation Instructions Network Camera Model No WV S P509 WV S P508 Lens Option This illustration represents WV SP509 P xa Before attempting to connect or operate this product please read these instruc tions carefully and save this manual for future use The model number is abbreviated in some descriptions in this manual This document is the Installation Guide for use in other countries except Japan WARNING e To prevent injury this apparatus must be securely attached to the floor wall ceiling in accordance with the installation instructions e To prevent fire or electric shock hazard do not expose this apparatus to rain or moisture e The installation shall be carried out in accor dance with all applicable installation rules e The connections should comply with local electrical code For Canada CAN ICES 3 A NMB 3 A ForU S A NOTE This equipment has been tested and found to comply with the limits for a Class A digi tal device pursuant to Part 15 of the FCC Rules These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial environ ment This equipment generates uses and can radiate radio frequency energy and if not installed and used in accordance with the instruction man ual may cause harmful interference to radio com munications
15. RRANTIES OF MERCHANTABILITY FITNESS FOR ANY PARTICULAR PURPOSE OR NON INFRINGEMENT OF THE THIRD PARTY S RIGHT THIS PUBLICATION COULD INCLUDE TECHNICAL INACCURACIES OR TYPOGRAPHICAL ERRORS CHANGES ARE ADDED TO THE INFORMATION HEREIN AT ANY TIME FOR THE IMPROVEMENTS OF THIS PUBLICATION AND OR THE CORRESPONDING PRODUCT S Disclaimer of warranty IN NO EVENT SHALL Panasonic System Networks Co Ltd BE LIABLE TO ANY PARTY OR ANY PERSON EXCEPT FOR REPLACEMENT OR REASONABLE MAINTENANCE OF THE PRODUCT FOR THE CASES INCLUDING BUT NOT LIMITED TO BELOW 1 ANY DAMAGE AND LOSS INCLUDING WITHOUT LIMITATION DIRECT OR INDIRECT SPECIAL CONSEQUENTIAL OR EXEMPLARY ARISING OUT OF OR RELATING TO THE PRODUCT 2 PERSONAL INJURY OR ANY DAMAGE CAUSED BY INAPPROPRIATE USE OR NEGLIGENT OPERATION OF THE USER ALL MALFUNCTIONS OR TROUBLES FROM UNAUTHORIZED DISASSEMBLE REPAIR OR MODIFICATION OF THE PRODUCT BY THE USER REGARDLESS OF THE CAUSE OF THE MALFUNCTION OR TROUBLE 4 INCONVENIENCE OR ANY LOSS ARISING WHEN IMAGES ARE NOT DISPLAYED DUE TO ANY REASON OR CAUSE INCLUDING ANY FAILURE OR PROBLEM OF THE PRODUCT 5 ANY PROBLEM CONSEQUENTIAL INCONVENIENCE OR LOSS OR DAMAGE ARISING OUT OF THE SYSTEM COMBINED BY THE DEVICES OF THIRD PARTY 6 ANY CLAIM OR ACTION FOR DAMAGES BROUGHT BY ANY PERSON OR ORGANIZATION BEING A PHOTOGENIC SUBJECT DUE TO VIOLATION OF PRIVACY WITH THE RESULT OF THAT SURVEILLANCE CAMERA S PICTURE INCLUDING SAVED D
16. V 0 5 V e Recommended sensitivity of microphone 48 dB 3 dB 0 dB 1 V Pa 1 kHz IMPORTANT e Connect disconnect the audio cables and turn on the power of the camera after turning off the power of the audio output devices Otherwise loud noise may be heard from the speaker Connect an external speaker with amplifier to the audio output connector for use of the audio transmission function Connect a stereo mini plug 93 5 mm Audio output is monaural e Recommended cable length 10 m 33 feet or less 25 26 Connect external devices to the EXT WO terminal Strip range When connecting an external device remove 9 mm 10 mm eg EEN 11 32 inches 13 32 inches of the outer jacket of the cable pl and twist the cable core to prevent the short circuit first 9 mm 10 mm Specification of cable wire 22 AWG 28 AWG AUR ae INCHES Single core twisted e Check whether the stripped part of the wire is not exposed and is securely connected lt WV SP509 gt lt WV SP508 gt GND GND m ALARM IN3 AUX OUT 3 AUX OUT 4321 4321 __ ALARM IN1 DAY NIGHT IN L_ ALARM IN 2 ALARM IN2 ALARM OUT ALARM OUT IMPORTANT e Do not connect 2 wires or more directly to a terminal When it is necessary to connect 2 or more wires use a splitter Input and output of the EXT WO terminal 2 and 3 can be switched by configuring the setting Off is
17. X Access indicator blinks when accessing Es SET ABF POWER pe 3 Power indicator INITIAL SET button ACT LINK Link indicator lit when linking MONITOR OUT EXT up GND 4 3 2 1 j ol AUX OUT BIN OUT 57 12 V DC power supply terminal Monitor for adjustment Output connector EXT I O terminals ABF indicator blinks when ABF is being activated About the INITIAL SET button After turning off the power of the camera turn on the power of the camera while holding down this button and wait for around 5 seconds or more without releasing this button Wait around 2 minutes after releasing the button The camera will start up and the settings including the network settings will be initialized Do not turn off the power of the camera during the process of the initialization Before initializing the settings it is recommended to write down the settings in advance 17 18 Slowly rotate the lens clockwise to mount the lens and connect the lens cable to the ALC lens con nector of the camera ALC lens connector CS mount lens option P Protruded portion E from mount face l Zoom lock knob 220 mm 25 32 inches or less b Protruded portion from flange face 4 5 mm 5 32 inches or less 13 Pin No FE 1 Dump NN 2 Dump O gt nin 3 Drive Focus ring E A Drive O Optional dedicated lens 24 Product name Model number ALC lens f
18. af compliant Connect a LAN cable category 5 or better straight STP between a PoE device Such as a hub and the network connector of the camera For Europe IMPORTANT e Use all 4 pairs 8 pins of the LAN cable e The maximum cable length is 100 m 328 feet e Make sure that the PoE device in use is compliant with IEEE802 3af standard e When connecting both the 12 V DC power supply and the PoE device for power supply 12 V DC will be used for power supply Depending on the PoE device used the power supply lamp may not light and the network connections may not be possible In this case disable the PoE device setting and refer to the operating instructions of the PoE device in use e When disconnecting the LAN cable once reconnect the cable after around 2 seconds When the cable is quickly connected the power may not be supplied from the PoE device Connection example when connecting to a network using a PoE hub Video monitor for Speaker with amplifier option adjustment use only ei PoE device hub 0000000000 0 e LJ OD OD LAN cable oo category 5 or better straight STP Microphone option PC e LAN cable category 5 1 IN LA or better straight STP j LAN cable category 5 or o Ho better straight STE Speaker with amplifier option Microphone option Video monitor for adjustm
19. airs check the symptoms with the following table Contact your dealer if a problem cannot be solved even after checking and trying the solution in the table or a problem is not described below gt Reference mo SE pages When using DC power supply e Is 12 V DC power supply connected to the power supply terminal Check whether the connection is appropriately established e Is the AC adaptor in use compliant with the Specifications Check the Specifications regarding AC adaptor When using a PoE device for power supply e Are the PoE device and the network connector on the rear of the camera connected using a LAN cable 4 pair Check whether the connection is appropriately established Depending on the PoE device the power supply will stop when the demanded power exceeds its total power limit for all PoE ports Refer to the operating instructions of the PoE device in use Power is not turned on gt 27 28 Is the zoom ring turned to the W or T end Adjust the focus again by slightly 18 19 moving the zoom ring to the direc tion of T or W The focus cannot be D gt adjusted 31 32 Specifications O Basic Power source Power consumption Ambient operating temperature Ambient operating humidity Monitor output for adjusting the angular field of view EXT VO terminal cable Microphone Line input CSP509 gt For microphone inp
20. contact your dealer or supplier for further information Information on Disposal in other Countries outside the European Union These symbols are only valid in the European Union If you wish to discard these items please contact your local authorities or dealer and ask for the correct method of disposal Cd Note for the battery symbol bottom two symbol examples This symbol might be used in combination with a chemical symbol In this case it complies with the requirement set by the Directive for the chemical involved For U S and Canada Panasonic System Communications Company of North America Unit of Panasonic Corporation of North America www panasonic com business For customer support call 1 800 528 6747 Two Riverfront Plaza Newark NJ 07102 5490 Panasonic Canada Inc 5770 Ambler Drive Mississauga Ontario L4W 2T3 Canada 905 624 5010 www panasonic ca Panasonic System Networks Co Ltd 2013 For Europe and other countries Panasonic Corporation http panasonic net Panasonic System Networks Co Ltd Fukuoka Japan Authorised Representative in EU Panasonic Testing Centre Panasonic Marketing Europe GmbH Winsbergring 15 22525 Hamburg Germany avs1113 0 PGQX1437ZA Printed in China
21. cts Keep away from heat sources Use of the damaged power cable may cause electric shock short circuit or fire Consult the dealer for repair Turn the power off when cleaning of this product Failure to observe this may cause injury Precautions for use This system is designed to be used indoors This product is not operable out doors This product has no power switch When turning off the power disconnect the power supply from the 12V DC power supply or the PoE device When using both the 12V DC power supply and the PoE device for power supply disconnect both the connec tions To keep on using with stable performance Do not use this camera in hot and humid con ditions for a long time Failure to observe this causes component degradation resulting in life shortening of this product Do not expose this camera to direct heat sources such as a heater Handle this camera with care Do not drop this camera nor apply shock or vibration to this camera Failure to observe this may cause trouble About the PC monitor Displaying the same image on a monitor for a long time may damage the monitor It is recom mended to use a screen saver When an error is detected this product will restart automatically This product will be inoperable for around 2 minutes after the restart just as when the power is turned on Product disposal transfer Data saved on this product or a storage device used with this produc
22. e resulting from fail ures arising out of improper installation or operation inconsistent with this documenta tion This camera is designed to be used indoors This camera is not operable outdoors Do not expose this camera to direct sunlight for hours and do not install the product near a heater or an air conditioner Otherwise it may cause deformation discoloration and malfunc tion Keep this camera away from water and moisture Installation place Contact your dealer for assistance if you are unsure of an appropriate place in your particu lar environment e Make sure that the installation area is strong enough to hold this product such as a concrete ceiling Install the camera in the foundation area of the architecture or where sufficient strength is assured If a ceiling board such as plaster board is too weak to support the total weight the area shall be sufficiently reinforced Do not place the unit in the following places e Locations where it may get wet from rain or water splash e Locations where a chemical agent is used such as a swimming pool e Locations subject to moisture or oil smoke such as a kitchen e Locations that have a specific environment that is subject to an inflammable atmo sphere or solvents e Locations where a radiation an X ray a strong radio wave or a strong magnetic field is generated e Locations where corrosive gas is pro duced Locations where it may be dam aged by briny air
23. ed by a firewall etc If this unit is connected to a network that includes PCs make sure that the system is not infect ed by computer viruses or other malicious entities using a regularly updated anti virus pro gram anti spyware program etc Protect your network against unauthorized access by restricting users to those who log in with an authorized user name and password Apply measures such as user authentication to protect your network against leakage or theft of information including image data authentication information user names and passwords alarm mail information FTP server information and DDNS server information After the unit is accessed by the administrator make sure to close the browser Change the administrator password periodically Do not install the camera in locations where the camera or the cables can be destroyed or damaged by persons with malicious intent Precautions Refer installation work to the dealer Installation work requires technique and experi ences Failure to observe this may cause fire electric shock injury or damage to the prod uct Be sure to consult the dealer Stop the operation immediately when something is wrong with this product When smoke goes up from the product the smell of smoke comes from the product or the exterior of the product has deteriorated con tinued use will cause a fire or fall of the product resulting in injury or damage to the product Turn the power of
24. ed during installation procedures PoweriCcord De eieiei eege Zeeche Eed iaa TTT TT EE Safety wire plate Tor coli a ba Safety wire UG der w egene Wire lug fixing screws M2 5 x 8 mm 5 16 inches Optional accessories User License Accessory For H 264 BB HCA8A BB HCA8CE 35 Information for Users on Collection and Disposal of Old Equipment and used Batteries These symbols on the products packaging and or accompanying documents mean that used electrical and electronic products and batteries should not be mixed with general household waste For proper treatment recovery and recycling of old products and used batteries please a take them to applicable collection points in accordance with your national legislation and the Directives 2002 96 EC and 2006 66 EC By disposing of these products and batteries correctly you will help to save valuable resources and prevent any potential negative effects on human health and the environment which could otherwise arise from inappropriate waste handling For more information about collection and recycling of old products and batteries please contact your local municipality your waste disposal service or the point of sale where you purchased the items Penalties may be applicable for incorrect disposal of this waste in accordance with national legislation For business users in the European Union If you wish to discard electrical and electronic equipment please
25. ent use only lt Required cable gt LAN cable category 5 or better straight STP For Europe IMPORTANT e The video monitor is used for checking the adjustment of the angular field of view when install ing the camera or when servicing It is not provided for recording monitoring use e Use a switching hub or a router which is compliant with 10BASE T 100BASE TX e Power supply is required for each network camera When using a PoE device hub 12 V DC power supply is unnecessary Configure the network settings Configuring the camera so that it can be accessed from a PC The following are descriptions for when the camera with default settings is configured If you are using firewall software on your PC the Setup Program may not be able to find any cameras on your network Configure the setting of the camera after temporarily invalidating the firewall software Contact the network administrator or your Internet service provider for information about configuring the settings of the network Insert the provided CD ROM into the CD ROM drive of your PC e The License Agreement will be displayed Read the Agreement and choose accept the term in the license agreement and click OK e The launcher window will be displayed If the launcher window is not displayed double click the CDLauncher exe file on the CD ROM Ta CD Launcher ES IP Setting Software Install Run Manual Install Open
26. erly or performance deterioration may be caused Code label The code labels accessory are required at inquiry for trouble Use caution not to lose these labels It is recommended to paste one of the labels onto the CD ROM case About the MOS image sensor e When continuously shooting a bright light source such as a spotlight the color filter of the MOS image sensor may have deteri orated and it may cause discoloration Even when changing the fixed shooting direction after continuously shooting a spotlight for a certain period the discolor ation may remain e When shooting fast moving subjects or performing panning tilting operations objects crossing the shooting area may look to be bending askew AVC Patent Portfolio License THIS PRODUCT IS LICENSED UNDER THE AVC PATENT PORTFOLIO LICENSE FOR THE PERSONAL USE OF A CONSUMER OR OTHER USES IN WHICH IT DOES NOT RECEIVE REMUNERATION TO i ENCODE VIDEO IN COMPLIANCE WITH THE AVC STANDARD AVC VIDEO AND OR ii DECODE AVC VIDEO THAT WAS ENCODED BY A CONSUMER ENGAGED IN A PERSONAL ACTIVITY AND OR WAS OBTAINED FROM A VIDEO PROVIDER LICENSED TO PROVIDE AVC VIDEO NO LICENSE IS GRANTED OR SHALL BE MPLIED FOR ANY OTHER USE ADDITIONAL NFORMATION MAY BE OBTAINED FROM MPEG LA L L C SEE HTTP WWW MPEGLA COM 13 14 Precautions for Installation Panasonic assumes no responsibility for injuries or property damag
27. f immediately and contact qualified service personnel for service Do not attempt to disassemble or modify this product Failure to observe this may cause fire or electric shock Consult the dealer for the repair or inspections Do not insert any foreign objects This could permanently damage the apparatus Turn the power off immediately and contact qualified service personnel for service Select an installation area that can sup port the total weight Selecting an inappropriate installation surface may cause the product to fall down or topple over resulting in injury Installation work shall be started after sufficient reinforcement Periodic inspections shall be conducted Rust on the metal parts or screws may cause a fall of the product resulting in injury or accidents Consult the dealer for the inspections Do not use this product in an inflammable atmosphere Failure to observe this may cause an explosion resulting in injury Avoid installing this bracket in the loca tions where salt damage occurs or corro sive gas is produced Otherwise the mounting portions will deterio rate and accidents such as a fall of this product may occur The measures of protection against a fall of this product shall be taken Failure to observe this may cause a drop result ing in injury or accidents Be sure to install the safety wire The exclusively designed mount bracket shall be used Failure to observe this ma
28. gt Safety wire Connection Caution e ONLY CONNECT 12 V DC CLASS 2 POWER SUPPLY UL 1310 CSA 223 or LIMITED POWER SOURCE IEC EN UL CSA 60950 1 Before starting the connection turn off the power of this camera and the devices to be connected Before start the connection prepare the required devices and cables Connect the RCA pin cable to the monitor Connect to output connector for adjustment on the the video rear only for adjustment of the angle field monitor etc of view cu This illustration represents WV SP509 IMPORTANT e The monitor output connector is provided only for checking the adjustment the angle field of view on the video monitor when installing the camera or when servicing It is not provided for recording monitoring use e Black bands may appear at the top bottom right and left of the screen There is no problem with adjustment since the angle field of view is not affected e The video output on the monitor for adjustment does not guarantee the video performance or image quality Connect the microphone to MIC LINE IN for use of the audio reception function Input impedance Approx 2 kQ Recommended cable length 1 m 3 3 feet or less for microphone input 10 m 83 feet or less for LINE input Recommended microphone Plug in power type microphone option Connect a monaural mini plug 83 5 mm e Supply voltage 2 5
29. ions included in the CD ROM for how to perform the auto back focus function from the setup menu e Subj moves frequently e Subj with large illuminance change e Subj with low illuminance e Subj through a window e Subj with less contrast such as white wall e Subj with heavy flicker 19 Insert remove a SD memory card WV SP509 only IMPORTANT e When inserting a SD memory card make sure the direction e Before removing the SD memory card make sure to select Not use for SD memory card on the SD memory card tab of the Basic page on the setup menu first Operating Instructions included in the CD ROM Open the slide cover on the side of the camera and then insert a SD memory card into the SD memory card slot If necessary loosen the screw of the clamp for SD memory card and tighten the screw after rotating the clamp 90 clockwise Recommended tightening torque 0 19 N m 0 14 lbf ft ABF 5 e 40 SDCARD LOCK Screw of the clamp for SD memory card Close the slide cover on the side of the camera To remove the SD memory card rotate the clamp for SD memory card 90 counterclockwise push the memory card to unlock it and remove the memory card from the SD memory card slot Installation Connect the safety wire The following is an example of safety wire connection IMPORTANT e Be sure to install the safety wire Ask your dealer for installation
30. lens Note that the adjustment method is different depending on t refer to the operating instructions for the lens to be used he type For further information When using 8x or 10x lens adjust the back focus after positioning the zoom ring at the W end and positioning the focus ring at a step short of the F end When using 2x or 3x lens adjust the back focus after positi and positioning the focus ring at a step short of the F end Depending on the lens to be used if the zoom ring is ful periphery may become dark In such a case rotate the zoo justment When images in the near infrared light area change from th oning the zoom ring at the T end y rotated in the W direction the m ring in the T direction for read e color mode to the black amp white mode out of focus may be occurred according to the nature of optical property In this case the focus can be corrected by selecting Auto or Preset for Adjusting method on the setup menu The focus will not automatically be adjusted accord ing to the illumination level change once the focus is corrected Refer to the Operating Instructions included in the CD ROM for how to configure the Adjusting method setting on the setu p menu When shooting the following subjects it may have difficulty adjusting the back focus position automatically In this case adjust the back focus position manually from the setup menu Refer to the Operating Instruct
31. melse med f lgende norm eller andre normgivende dokumenter som f lger bestemmelsene i direktiv 2004 108 EC Contents Important Safety Ipnestruchons nnt kAAnnE EAEN EAEEEEE EAEn E EEEn EE Ennem EEEE 5 Kimitationicor IEL a A o A 6 Disclaimeriot warranty ssas wk oon ews nn A awh Sn a aw Rain NS 6 Preface ita About notations s e Main functions s About the user manuals System requirements for a PDC Trademarks and registered trademarks Copyright c cecc2csscceeecceeseecsun ica x NES NA PreCautlonS a a O Precautions for Installation coo id Major operating CONtroOlS ccciccccsccccceccscccscsscucccececacsuevccsvsccasoecvcnducecucsuevesdececacsactecdssvseceuctensreccnense s LSNSIMOUNTING BEE Insert remove a SD memory card WV SP509 only Installation Boat A BE a ANE CONNECTION e court dd ee oda eerie eee Configure the network settings E THOUDIESNOOUING iia dt lee EE Standard RE Wl el IR SDXC SDHC SD memory card is described as SD memory card Important safety instructions 1 Read these instructions 2 Keep these instructions 3 Heed all warnings 4 Follow all instructions 5 Do not use this apparatus near water 6 Clean only with dry cloth 7 Do not block any ventilation openings Install in accordance with the manufacturer s instruc tions 8 Do not install near any heat sources such as radiators heat registers stoves or other appara tus including
32. ments displaying of images may become slower or the web browser may become inoperable e Audio may not be heard if a sound card is not installed on a PC Audio may be interrupted depending on the network environment e Microsoft Windows 7 Starter Microsoft Windows Vista Starter and Microsoft Windows XP Professional 64 bit Edition are not supported e When using IPv6 for communication use Microsoft Windows 7 or Microsoft Windows Vista Note e For further information about PC system requirements and precautions for when using Microsoft Windows 7 Microsoft Windows Vista or Windows Internet Explorer click Manual Open from the supplied CD ROM and refer to Notes on Windows Internet Explorer versions e f using Microsoft Windows XP screen tearing may occur when the shooting scene drastically changes for example while shooting fast moving subjects due to the GDI restrictions of the OS A phenomenon in which portions of the screen are displayed out of alignment e For information on the operation verification of the supported operating systems and web browsers refer to our website at http security panasonic com pss security support index html Trademarks and registered trademarks e Adobe the Adobe logo and Reader are either registered trademarks or trademarks of Adobe Systems Incorporated in the United States and or other countries e Microsoft Windows Windows Vista Internet Explorer ActiveX and DirectX a
33. mpact driver Use of an impact driver may damage the screws or cause tightening excessively e When a screw is tightened make the screw at a right angle to the surface After tightening the screws or bolts perform visual check to ensure tightening is enough and there is no backlash Fall prevention measures When the external safety wire is connected select a connection point resulting in that noth ing will hit people after the mount bracket is damaged Remove the slack of the safety wire adjusting the length of the wire and the position where to connect Angle adjustment Be sure to loosen the screw of this product mount bracket when the camera angle is adjusted If the camera angle is changed when the screw is tight excessive force is applied to the camera mount bracket and camera and accordingly they may be damaged Be sure to tighten the screw securely after camera angle adjustment Radio disturbance When this product is used near TV radio anten na strong electric field or magnetic field near a motor a transformer or a power line images may be distorted and noise sound may be pro duced PoE Power over Ethernet Use a PoE hub device that is compliant with IEEE802 3af standard Router When connecting this product to the Internet use a broadband router with the port forward ing function NAT IP masquerade Refer to the Operating Instructions included in the CD ROM for further information about the po
34. n the CD ROM Explains how to perform the settings and how to operate this camera Adobe Reader is required to read these operating instructions on the provided CD ROM When the Adobe Reader is not installed on the PC download the latest Adobe Reader from the Adobe web site and install it SP509 SP508 shown in the instructions and illustrations used in these operating instructions indi cate the WV SP509 WV SP508 English screens are used in these operating instructions System requirements for a PC CPU Intel Core 2 Duo 2 4 GHz or faster recommended Memory 512 MB or more A minimum of 1 GB memory is required when using Microsoft Windows 7 or Microsoft Windows Vista Network Interface 10BASE T 100BASE TX 1 port Audio interface Sound card when using the audio function Monitor Image capture size 1024 x 768 pixels or more Color 24 bit True color or better OS Microsoft Windows 7 Microsoft Windows Vista Microsoft Windows XP SP3 Web Browser Windows Internet Explorer 9 0 32 bit Windows Internet Explorer 8 0 32 bit Windows Internet Explorer 7 0 32 bit Microsoft Internet Explorer 6 0 SP3 Other CD ROM drive It is necessary to read the operating instructions and use the software on the provided CD ROM DirectX 9 0c or later Adobe Reader It is necessary to view the PDF file on the provided CD ROM IMPORTANT e When using a PC that does not meet the above require
35. nal SD memory card is available Up to 16 camera images can be displayed simultaneously on a multi screen including the camera itself Manufactured by Panasonic SD speed class 4 or higher SD memory card option CSP509 gt SDXC memory card 64 GB SDHC memory card 4 GB 8 GB 16 GB 32 GB SD memory card 2 GB except miniSD card and microSD card Cellular phone compatibility JPEG image AUX control by access level Mobile terminal compatibility iPad iPhone iPod touch iOS 4 2 1 or later As of October 2013 4 Android mobile terminals 1 Transmission for 2 streams can be individually set in the same compression method 2 For further information about PC system requirements and precautions for when using Microsoft Windows 7 Microsoft Windows Vista or Windows Internet Explorer click Manual Open from the supplied CD ROM and refer to Notes on Windows Internet Explorer versions 3 When using IPv6 for communication use Microsoft Windows 7 or Microsoft Windows Vista 4 For further information about compatible devices refer to our website http security panasonic com pss security support info html Standard accessories Installation Guide this document Warranty card CD ROM uu PP e 1 The CD ROM contains the operating instructions and the software 2 This label may be required for network management The network administrator shall retain the code label The following parts are us
36. or 1 3 type CCD cameras WV LZA62 2 2x varifocal High resolution If a lens for 1 3 type video camera other than the above is mounted and the camera is used at resolution of 1280 x 720 or higher the camera cannot achieve full performance of high resolu tion It is recommended to use a dedicated high resolution lens especially when the illuminance level of the photographic subject is low and the camera is used with the lens iris open How to adjust the focus Before adjustment reset the back focus position by holding down the auto back focus button for 5 seconds or more when the power is on This operation can also be performed on the setup menu Refer to the Operating Instructions included in the CD ROM Adjust the view angle and focus coarsely by adjusting the zoom and focus of the lens to center a subject in the screen and then press the auto back focus button on the side of the camera page 16 or perform the auto back focus function from the setup menu Refer to the Operating Instructions included in the CD ROM for how to perform the auto back focus function from the setup menu IMPORTANT e Press the auto back focus button twice quickly to perform basic adjustments in a short time For more accurate adjustments use the detailed adjustments e After performing basic adjustments make sure to press the auto back focus button once to perform detailed adjustments Note The most common use of a varifocal lens and a zoom
37. re either regis te red trademarks or trademarks of Microsoft Corporation in the United States and or other coun tries e Microsoft product screen shot s reprinted with permission from Microsoft Corporation e Intel and Intel Core are trademarks or registered trademarks of Intel Corporation or its subsid iaries in the United States and other countries e SDXC Logo is a trademark of SD 3C LLC e iPad iPhone and iPod touch are trademarks of Apple Inc registered in the U S and other countries e Android is a trademark of Google Inc Use of this trademark is subject to Google Permissions e All other trademarks identified herein are the property of their respective owners Copyright Distributing copying disassembling reverse compiling and reverse engineering of the software provided with this product are all expressly prohibited In addition exporting any software provided with this product violating export laws is prohibited 10 Network security As you will use this unit connected to a network your attention is called to the following security risks Leakage or theft of information through this unit Use of this unit for illegal operations by persons with malicious intent 7 Interference with or stoppage of this unit by persons with malicious intent It is your responsibility to take precautions such as those described below to protect yourself against the above network security risks Use this unit in a network secur
38. rt forwarding function Time amp date setting It is necessary to set the time amp date before putting this product into operation Refer to the Operating Instructions on the provided CD ROM for descriptions of how to perform the settings 15 Major operating controls lt Side view gt Panasonic lt ALC t C lens connector Lens option lt WV SP509 gt m SD memory card slot Panasonic lt L Tipoa mount base Slide cover Clamp for SD memory card Auto back focus button ABF lt WV SP508 gt Panasonic lt t Ween Tripod mount base 16 lt Rear view gt lt WV SP509 gt Network connector Audio output connector 10BASE T OBASE TX le e Link indicator neh zl SD CARDIABF POWER lit when linking po ETO GK Power indicator i EZ oo 12 V DC power supply terminal Monitor for adjustment 2 1 2 ARM IN 1 DAYINIGHT IN LIN 2 ALARM OUT D 4 3 Output connector iewes LALAR Access indicator blinks when accessing wu SE Microphone line input connector INITIAL SET button EXT I O terminals D z SD memory card error indicator ABF indicator blinks when ABF is being activated lt WV SP508 gt Network connector a S 10BASE T OBASE T
39. ssible to control the sequence It is possible to control its sequence and transmit the image cut out only when H 264 stream2 is provided VIQS function Variable Image Quality on Specified area It is possible to provide specified areas with high quality image without changing the overall size of the data Up to 2 areas can be specified The adjustment function of compensation for the distorted images It is possible to compensate for lens distortion The amount of compensation performed can be adjusted SDXC SDHC SD memory card slot equipped t is possible to save H 264 videos and JPEG images on the SDXC SDHC SD memory card man ually at an alarm occurrence during the period of the schedule or on a web browser It is also pos sible to save JPEG images at a network failure occurrence Download is possible Recommended SDXC SDHC SD memory card ee page 35 Introduction of Super Dynamic Operating Instructions included in the CD ROM MEGA Super Dynamic compensates brightness on a pixel to pixel so that it produces clearer imag es even if objects have various illumination intensities Auto back focus ABF function Auto back focus ABF ensures easy installation and stable focus in both color and black 8 white modes About the user manuals There are 2 sets of operating instructions for the WV SP509 WV SP508 as follows e Installation Guide Explains how to install and connect devices e Operating Instructions included i
40. t may lead to personal information leakage When it is necessary to dispose or give this product to someone even when for repair make sure that there is no data on this product Cleaning this product body Be sure to turn off the power before cleaning Do not use strong abrasive detergent when cleaning this camera Otherwise it may cause discoloration When using a chemical cloth for cleaning read the caution provided with the chemical cloth product Transmission interval Image transmission interval may become slow depending on the network environment PC performance shooting subject access num ber etc About SD memory card e Before removing the SD memory card make sure to select Not use for SD memory card on the SD memory card tab of Basic page on the setup menu first Operating Instructions included in the CD ROM Refer to page 20 for descriptions of how to insert remove an SD memory card e When using an unformatted SD memory card format it using this camera Recorded data on the SD memory card will be delet ed when formatted If an unformatted SD memory card or an SD memory card formatted with other devices is used this product may not work properly or performance deterioration may be caused Refer to the Operating Instructions included in the CD ROM for how to format a SD memory card e When some SD memory cards are used with this product the product may not work prop
41. ter max 16 30 s Gain On High BW 0 06 Ix 0 006 footcandle F1 4 Auto slow shutter Off 1 30 s Gain On High 0 004 Ix 0 0004 footcandle F1 4 Auto slow shutter max 16 30 s Gain On High Color 0 5 Ix 0 05 footcandle F1 4 Auto slow shutter Off 1 30 s Gain On High 0 03 Ix 0 003 footcandle F1 4 Auto slow shutter max 16 30 s Gain On High Super Dynamic Dynamic range Gain AGC Adaptive black stretch Light control mode setting Shutter speed Auto slow shutter Day 8 Night IR CSP503 gt Day amp Night electrical CSP508 gt White balance Digital noise reduction Video analytics Face detection Privacy zone VIQS Camera title on screen Video motion detection VMD alarm Back focus Adjustment ALC lens drive Lens mount BW 0 3 Ix 0 03 footcandle F1 4 Auto slow shutter Off 1 30 s Gain On High 0 02 Ix 0 002 footcandle F1 4 Auto slow shutter max 16 30 s Gain On High Converted value On Off 52 dB typ only at Super Dynamic On On Low On Mid On High Off On Off only at Super Dynamic Off Indoor scene 50HZ 60Hz Outdoor scene ELC Fix shutter Off 1 30 s 3 100 3 120 2 100 2 120 1 100 1 120 1 250 1 500 1 1000 1 2000 1 4000 1 10000 only at Super Dynamic Off Off 1 30 s Max 2 30 s Max 4 30 s Max 6 30 s Max 10 30 s Max 16 30 s On Off Auto1 Auto2 Off Auto ATW1 ATW2 AWC High Low On Off with the XML no
42. tification setting On Off up to 2 zones available On Off up to 2 zones available Up to 20 characters alphanumeric characters marks On Off On Off up to 4 areas available Auto back focus Focus Adjusting method Auto Preset Fix DC drive CS mount 1 To use the XML notification and Face detection functions you need to install the extension software Network Network Resolution 10BASE T 100BASE TX RJ45 connector Imaging mode 2 megapixel 16 9 H 264 1920x1080 640x360 320x180 max 30 fps JPEG MJPEG 1920x1080 640x360 320x180 max 30 fps Imaging mode 1 3 megapixel 16 9 H 264 1280x720 640x360 320x180 max 30 fps JPEG MJPEG 1280x720 640x360 320x180 max 30 fps Imaging mode 1 3 megapixel 4 3 H 264 1280x960 VGA 640x480 QVGA 320x240 max 30 fps JPEG MJPEG 1280x960 VGA 640x480 QVGA 320x240 max 30 fps Imaging mode 3 megapixel 4 3 H 264 1280x960 max 15 fps JPEG MJPEG 2048x1536 max 15 fps 33 Image compression method al Transmission interval Transmission the image cut out Audio compression method CSP509 gt Bandwidth control Protocol OS 2 3 Browser Maximum concurrent access number FTP client Multi screen Compatible SDXC SDHC H 264 Image quality Low Normal Fine Transmission type Unicast Multicast Bit rate Constant bit rate 64 kbps 128 kbps 256 kbps 384 kbps 512 kbps 768 kbps 1024 kbps 1536 kbps 2048 kbps 3072
43. ut For line input Audio output CSP509 gt Dimensions Mass Finish Camera mage sensor Effective pixels Scanning area Scanning system Minimum illumination CSP509 gt Minimum illumination CSP508 gt 12 V DC PoE IEEE802 3af compliant 12 V DC 570 mA PoE 48 V 125 mA Class 2 devices 12 V DC 550 mA PoE 48 V 120 mA Class 2 devices ONLY CONNECT 12 V DC CLASS 2 POWER SUPPLY UL 1310 CSA 223 or LIMITED POWER SOURCE IEC EN UL CSA 60950 1 10 C to 50 C 14 F to 122 F Less than 90 no condensation VBS 1 0 V p p 75 Q composite signal RCA jack ALARM IN1 DAY NIGHT IN ALARM IN2 ALARM OUT ALARM IN3 AUX OUT x1 for each CSP508 gt ALARM IN ALARM OUT AUX OUT x1 each 23 5 mm monaural mini jack Input impedance Approx 2 KQ Applicable microphone Plug in power type Supply voltage 2 5 V 0 5 V Input level Approx 10 dBV 23 5 mm stereo mini jack monaural output Output impedance Approx 600 Q Line level 75 mm W x 65 mm H x 132 5 mm D 2 31 32 inches W x 2 9 16 inches H x 5 1 4 inches D excluding connectors ter minals Approx 420 g 0 93 lbs Fine silver 501 1 3 type MOS image sensor Approx 3 1 megapixels 4 51 mm H X3 38 mm V 3 16 inches H x 1 8 inches V Progressive Color 0 5 Ix 0 05 footcandle F1 4 Auto slow shutter Off 1 30 s Gain On High 0 03 Ix 0 003 footcandle F1 4 Auto slow shut
44. y cause a drop result ing in injury or accidents Use the exclusively designed mount bracket for installation The screws and bolts shall be tightened to the specified torque Failure to observe this may cause a drop result ing in injury or accidents Do not install this product in locations subject to vibration Loosening of mounting screws or bolts may cause a fall of the product resulting in injury Install this product in a location high enough to avoid people and objects from bumping the product Failure to observe this may cause a drop result ing in injury or accidents Do not strike or give a strong shock to this product Failure to observe this may cause fire or injury Turn the power off when do wiring of this product Failure to observe this may cause electric shock In addition short circuit or wrong wiring may cause fire 11 12 Do not rub the edges of metal parts with your hand Failure to observe this may cause injury Do not touch this product the power cable or the connected cables during thunder Including during installation work Failure to observe this may cause electric shock Keep SDXC SDHC SD memory cards option away from infants and children Otherwise they may swallow the cards by mis take In this case consult a doctor immediately Do not damage the power cable Do not damage fabricate twist stretch bun dle or forcibly bend the power cable Do not place heavy obje
Download Pdf Manuals
Related Search