Panasonic WJ-ND400 Installation Guide
Contents
1. New functions Software V3 40 Due to software upgrade the following new functions have become available Details on the new functions It is possible to start obtaining SD memory data images recorded on the SD memory card on the camera manually When the SD memory backup is activated the Obtain SD memory data button will be displayed under the Stop recording button Obtaining SD memory data will start when the Obtain SD memory data button is clicked Reference pages Operating Instructions page 16 The event log relating to the i VMD of the camera is added CAM INT Intruder detection CAM LOI Loitering detection CAM DIR Direction detection CAM SCD Scene change detection Note e This function is available when On is selected for Additional alarm area data on the camera For further information about this setting refer to the operating instructions of the camera in use Operating Instructions page 42 Details on the new functions Reference pages By using the viewer software the function that compensates and converts fish eye images captured by Panasonic s 360 degree network camera hereinafter referred to as 360 degree camera to 1 screen PTZ or 4 screen PTZ is now available Compensation function Important The compensation function is available only when the library file for compensation is downloaded from the URL below and installed on the PC in2. information on SD memory card loaded on the camera which is set SD memory recording and the progress on SD memory recording can be checked on the setup menu e Camera software Displays the software version of camera e Model no Displays the model number of SD memory card loaded on the camera e Hour meter Displays the operating time of SD memory card loaded on the camera e Overwrite Displays how many times the data has been overwritten on the SD memory card loaded on the camera Progress information Displays the progress on SD memory recording Date amp time display The time and date of images being obtained from the SD memory card loaded on the camera The SD memory card loaded on the camera contains no image data to be obtained Note e Refer to the readme txt on the provided CD ROM about the available cameras Maintenance gt Product information Setup Instructions page 78 Product information Details on the new functions Menu to configure the settings The following two NTP server addresses can be registered Server gt NTP e Primary server address The former name NTP server address Setup Instructions page 57 e Secondary server address NTP New functions Software V3 20 Due to software upgrade the following new functions have become available Details on the new functions Menu to configure the settings ONVIF compl
3. iant cameras can be used with the recorder Camera gt NW camera Note e For further information refer to the readme txt on Setup Instructions page 49 the provided CD ROM Automatic camera detection and registration The underlined setting values are added to Hour meter Maintenance gt Disk warning Off 10000h 20000h default 30000h 40000h 50000h Operating Instructions page 83 Disk av0912 2073 PGQQ1065XA
4. which the viewer software is installed http security panasonic com pss security support info html e When images that can be compensated are detected the E buttons will be displayed Click one of them to change the compensation method Get back to fish eye image bia Compensate and convert to 1 screen PTZ bi Compensate and convert to 4 screen PTZ e When displaying images that are compensated and converted to 1 screen PTZ or 4 screen PTZ it is possible to make a desired point to position as the center point of the image by clicking on the image Notes for Installation pdf New functions Software V3 30 Due to software upgrade the following new functions have become available Details on the new functions The setting of SD memory recording has become available even when the compression method is H 264 SD memory recording Off On Default when cameras have been registered Compression H 264 Note e When setting the SD memory recording in ia make sure that H 264 1 or H 264 2 is selected for the Recording format setting of the camera e If the load is high on the recorder or the network the SD memory recording may sometimes be performed even when the connection with the je camera is not interrupted a Menu to configure the settings Emergency rec Schedule gt Program Setup Instructions page 36 SD memory rec The
Download Pdf Manuals
Related Search