Home

Palsonic N111 TFTV553LEDR User's Manual

1. Analogue programme selection Be sure to select ATV through the Input Source menu See the above steps for source selection e Press CHa or CH to go to the next or previous channel The skipped channels can not be selected e Press the number buttons to directly select any channel you want then wait for the channel to change Note Button presses must be within three seconds of each other e Press LIST to display the Channel List then press or to select a channel and then press OK e After you have created the favorite channel list you can press FAV LIST button to display the favorite channel list Use or w to select a channel and then press OK e lo go to the previous channel viewed press Co 16 Basic Operations Continued Volume adjusment To adjust the volume e Press the VOL to increase or decrease the volume e Press the MUTE button to temporarily turn off the sound To restore the sound press the MUTE button again Displaying program information Press the INFO button to display the information banner The information banner displays current status information such as the channel number and signal source Depending on the mode different information is displayed In DTV mode more information will be displayed Below figure is an example banner in DTV mode In DTV mode the information banner may contain e Current channel number and name e Currenttime e Current programme name start and
2. From EPG RECORDER pressing EPG then BLUE button to Title Start Date EndDate Programme Mode access window press YELLOW button to call out the News 2011 09 22 08 47 2011 09 22 09 05 2ABC TV Sydney Once RECORDER LIST Genius Go GoGo 2011 09 23 18 47 2011 09 23 19 25 82 CH4 Once s 2 If you want to cancel some schedule press 4 or v to select the programme event then press RED button to delete it 3 Toreturnto EPG window press GREEN button To go back to EPG RECORDER window press YELLOW button To directly close the menu press EXIT Delete Edit QQ Move Schedule B Playing back the recorded contents When your scheduled programs have been recorded onto your connected external memory device the TV can show the Recorded List From the list you can select program you want to play back In addition you can sort the list by your preference obtain more information about the program event or delete some unwanted programmes Recorded List Programme News Press REC LIST button to open the Recorded List e f you want to sort the program list by your preference press Index button one or more times to select different order by Genius Go Go Go PTH channel number by time or by program title alphabetical order and the programmes are automatically sorted in this order e If you want to delete some unwanted programmes press 4 or v to select then press RED button e If you want to obtain more program information such
3. Press vor to select your unwanted channel press BLUE button and a skip symbol appears alongside the selected channel in the list which means this channel will be skipped To cancel the skip setting press BLUE button again and the symbol disappears Repeat the above steps to set more programs to skip Press EXIT to close the menu Now when you press CHA v these unwanted channels will be skipped Note If the Programme Edit menu has more than one page you may press 4 or v to scroll the page upward or downward You can delete your unwanted channels from the channel list After deleting you can not find them unless you perform a new channel search 4 Navigate to the Channel menu press sorv to select Programme Edit press or OK to open the Programme Edit menu Press vora to select your unwanted channel press RED button and a delete symbol appears alongside the selected channel in the list Press RED button again to confirm the deleting and this channel is deleted Use wor to select other unwanted program and press RED button to delete Press EXIT to close the menu Note If the Programme Edit menu has more than one page you may press or v to scroll the page upward or downward Adjusting the Picture Adjusting the picture To adjust the picture Press MENU The on screen menu opens with the Picture menu displayed then press v to access 2 Press v a tohighlight an option press 4 gt t
4. 3 Replace the cover Battery precautions Improper use of batteries can result in a leakage of chemicals and or explosion Be sure to follow the instructions below e Place batteries with their terminals corresponding to the and indications e Different types of batteries have different characteristics Do not mix batteries of different types e Do not mix old and new batteries Mixing old and new batteries can shorten the life of new batteries and or cause old batteries to leak chemicals e Remove batteries as soon as they are non operable Chemicals that leak from batteries can cause a rash If chemical leakage is found wipe with a cloth e Dispose of batteries in a proper manner e If the remote control is not used for an extended period of time remove the batteries e The batteries shall not be exposed to excessive heat such as sunshine fire orthe like ME Aiming the remote control Use the remote control by pointing it towards the remote sensor on the front of your TV Objects between the remote control and the remote sensor May prevent proper operation Cautions regarding use of remote control eDo not expose the remote control to shock In addition do not expose the remote control to liguids and do not place in an area with high humidity eDo not install or place the remote control under direct sunlight The heat may cause deformation ofthe unit eThe remote control may not work properly if the remo
5. The USB menu may vary in different situation If you want to pull out the USB device please exit USB mode first For instructions on using your USB device refer to the owner s manual of your USB device Please use English to name your files Otherwise the file names can not be shown correctly You can connect the USB device to the TV to display most photos in JPG BMP and PNG formats but for the sake of technical updating some formats above may not be supported To view photos Connect USB device and switch to USB mode the USB main menu will appear automatically 2 Press 4 orb to select PHOTO menu and press OK to access 3 Press a orv to navigate among files or folders 4 Press to start slide show from current photo file or press OK to open the highlighted folder After a photo folder is opened you can press GREEN button to view photos in thumbnail then uses 4 gt to navigate press P i to start slide show from current photo During photo slide show you can press 1 Play pause e a Stop Id lt Goto the previous photo PPI Go tothe next photo DSC08758 jpg 4920x1200 C5 Rotate the photo clockwise To restore to slide show press DSC08759 jpg A ees PA DSC08760 jpg gt gt Press one or more times to zoom in the photo In zoom in DSC08761 jpg mode you can press arrow buttons to pan the photo lt lt Press one or more times to zoom out the photo A BACK ENTER PD SELECT Py
6. wall outlet and disconnect the antenna This will prevent damage to the equipment due to lightning and power line surges 18 Do not use this apparatus near water for example near a bathtub washbowl kitchen sink or laundry tub in a wet basement or near a swimming pool and the like The apparatus shall not be exposed to dripping or splashing and that no objects filled with liquids such as vases shall be placed on the apparatus Do not use immediately after moving from a low temperature to high temperature environment as this causes condensation which may result in fire electric shock or other hazards 19 Clean only with dry cloth Unplug this product from the wall outlet before cleaning Do not use liquid cleaners or aerosol cleaners Use a damp cloth for cleaning 20 Ventilation Do not block any ventilation openings Install in accordance with the manufacturer instructions The vents and other openings in the cabinet are designed for ventilation Do not cover or block these vents and openings since insufficient ventilation can cause overheating and or shorten the life of the product Do not place the product on a bed sofa rug or other similar surface since they can block ventilation openings This product is not designed for built in installation do not place the product in an enclosed place such as a bookcase or rack unless proper ventilation is provided or the manufacturer s instructions are followed 21 Heat
7. 4 or gt to select On to turn on the function To cancel the function select Off After Activate is set to On press sorv to select Hour or Minute press 4 or b to adjust the value When finished use or v to select Close and press OK to confirm the setting and close this sub menu To close the menu press EXIT button Setting Clock amp Timer Continued Setting Sleep timer To set Sleep timer Sleep timer lets you select the amount of time before your TV turns itself off automatically This setting is cleared when the TV is turned off Channel 01 Jan 2011 15 30 l Off Time Off On Time Off Sleep Timer lt Off Auto Sleep lt Off gt lt NSW ACT GMT 10 gt Press MENU Press 4 orb to display Time menu press v toaccess Press 4 or v to select Sleep Timer Time Zone Press 4 or b toselectthe amount of time to turn offthe OO SELECT timer please select Off OY MOVE MENU RETURN Note After you have set sleep timer when the last 60 seconds comes the Power Off screen will appear to remind you after how many seconds the TV will power off You can press any button to quit Setting Auto Sleep To set Auto Sleep Clock Off Time On Time Sleep Timer Auto Sleep Time Zone SELECT Off Time On Time Sleep Timer Auto Sleep Time Zone OS SELECT T PEGS E ay Option Channel 01 Jan 2011 15 30 off Off Off On gt NSW ACT GMT 10 OY MOVE menu RETURN ATA Gp ape Channel 0
8. Audio Sampling Rate 32 44 1 48 kHz Dimensions W x H x D 529 W x 372 H x 140 D mm stand included 529 W x 342 H x 37 D mm stand not included Weight 3 8 kg stand included 3 4 kg stand not included Terminals Antenna in 1 AV in 1 COMPONENT in 1 D Sub in 1 HDMI in 2 RS 232 1 Headphone SPDIF out 1 USB port 1 AV out 1 Note Design and specifications are subject to change without notice 2 Weight and dimensions shown are approximate 3 Specifications and external appearance may be changed for the sake of improvement 39 PALSONIC 1 JOYNTON AVENUE WATERLOO NSW 2017 AUSTRALIA TEL 02 9313 7111 FAX 02 9313 7555 PALSONIC CUSTOMER SERVICE TELEPHONE AUSTRALIA 1300 657 888 5944037690 Ver 1 0
9. PLAY PAUSE EAS Exit slide show Exit slide show and return to USB main menu When USB main menu is on the screen you can press C5 Press one or more times to select a repeat mode You can select repeat to show one photo repeat to show all photos when slide show reaches end no repeat when it reaches end and go to USB main menu Note When a photo file is selected you can press OK button to mark it as favourite and a check mark appears press OK again to cancel the mark Do so to create your favourite photo list then slide show goes among these favourite photos To quickly select unselect all photos inside this folder move the cursor to its volume row first row and press OK then choose Select or UnSelect 35 Using USB Multi Media Player continued Playing music Generally audio player supports MP3 WMA and AAC formats but for the sake of technical updating some formats above may not be supported vy 8 MOVIE TEXT Page 1 1 To listen to music Connect USB device and switch to USB mode the USB main menu will appear automatically 2 Press 4 orb to select MUSIC menu and press OK to access 3 Press or to navigate among files or folders and select your desired one Press u to start music playing from current file or press OK to open the highlighted folder During music playing you can press s Play pause a m Stop playing gt gt Fast forward MESS
10. Tuning this case select another sound system SELECT MOVE MENU RETURN sis UL C Current CH Selects current channel using 4 or System BG Current CH D Search Channel search operation Search Se Press to search up the band or 4 to search down the band Press 4 or b repeatedly until your desired channel is displayed E Fine Tune Manual fine tuning SELECT Press 4 or gt until better picture and sound are obtained F Frequency Shows current frequency it can not be adjusted During the process you can press EXIT to exit the operation 3 Press RED button to save your settings Tae le CU CUSED Ifa channel is not already labeled you can label the channel to make it analogue only easier to identify You can also relabel a channel that is already labeled Press MENU Press 4 or gt to select Channel menu press v to access Auto Tuning Press wor to select Programme Edit press b or OK to DTV Manual Tuning open the Programme Edit menu and a programme list is ATV Manual Tuning displayed Programme Edit File System Within the programme list press v or a to select a channel you want to label press GREEN button to start to label A cursor appears at the edit field OAO SELECT AY MOVE MENU RETURN Programme Edit Use ora to selecta character use 4 orb to move the cursor 1 S 03 nO When finished press OK to confirm 3 S 04 The maximum length of label is 5 characters 4 C 04
11. as Date Time Duration Program Name Channel Name press a or v to select your desired program then press b button To AYE NU OK KOIVA index PET ela close the information press 4 button Q amp Q INFO EXIT DEL 2 If you want to play back some recorded programme press 4 or v to select then press OK to start playing Current time Broadcasting time During playing back you can press Playback 21 56 83 iN N A AE Ees E 2 ee it EE e A B repeat button During play you can pause and repeat any specified section simply by pressing this button at the starting and Program name Duration ending points To cancel press this button once again Channel name o PP lt lt Fast forward rewind PbI I lt lt Previous next IN Time shift Time Shift function is the recording of live programme to an external memory device to be viewed at a later time more convenient to the user With the miracle of Time Shift you can pause rewind and replay live TV by temporarily saving a programme onto the connected external memory device After successful PVR File System check you can use Time Shift function now Press T SHIFT button to start time shifting The live programme stops at the current state At the bottom screen a control bar will appear for your help After some seconds this control bar will be minimized in size and glitter on the screen To restore please press OK During the process you can press Current time e i
12. cropped 1 1 pixel mapping D SUB HDMI only Displays an input source without scaling it This option is available on either of these two conditions native resolution 1920x1080 input Sl C aes resolution 1920 x 1080p native resolution 1366x768 input resolution 360 x768 F hedi Note You can also press ASPECT to select the aspect ratio FECZINE Mic PIEEHEE e Noise Reduction Selects the noise reduction mode to Press the FREEZE button to freeze the image reduce picture noise snow You can select Low Middle on the screen the video sources still run Press High or Of again to restore e Overscan D SUB HDMI only Turn this On to adjust the picture s reproduction rate available when the TV s aspect ratio is in 4 3 or 16 9 and the input signal is in video format hn di Elea h e Adaptive Contrast Turn this On to optimize the picture e Ifa fixe image is disp ayed on the screen for a display for a more vivid image long time that fixed image may become imprinted on the screen and remain visible e HDMI Black Level HDMI only Selects the black level on Therefore do not freeze the picture for a long the screen Select Low for darker screen Normal for brighter imie screen Available when RGB signal is input through HDMI jack e In some mode the FREEZE function can not Screen D SUB only Adjusts the computer image work 23 Adjusting the Sound Adjusting the sound EA rb JE Ser A Ne VE J Pic
13. liquid has been spilled or objects have fallen into the apparatus the apparatus has been exposed to rain or moisture does not operate normally or has been dropped Damage requiring service lf any of the following conditions occurs unplug the power cord from the AC outlet and request a qualified service person to perform repairs a When the power cord or plug is damaged b When aliquid is spilled on the product or when objects have fallen into the product c When the product has been exposed to rain or water d When the product does not operate properly as described in the operating instructions Do not touch the controls other than those described in the operating instructions Improper adjustment of controls not described in the instructions can cause damage which often requires extensive adjustment work by a qualified technician e Ifthe product has been dropped or the cabinet has been damaged in any way f When the product displays an abnormal condition or exhibits a distinct change in performance Any noticeable abnormality in the product indicates that the product needs servicing 12 Replacement parts In case the product needs replacement parts make sure that the service person uses replacement parts specified by the manufacturer or those with the same characteristics and performance as the original parts Use of unauthorized parts can result in fire electric shock and or other danger 13 Safety checks Upon co
14. menu press EXIT button From Option menu you can select and adjust the following OSD Language Selects on screen menus language In this model only ENGLISH is available Hearing Impaired digital only Selects On to display the subtitles if available for the hearing impaired S PDIF Output digital only Selects the digital audio output mode for S PDIF You can select AUTO or PCM AUTO This mode outputs Dolby Digital or PCM to the digital audio output jack S PDIF providing it is being broadcast PCM Select this when a 2ch digital stereo amplifier is connected to the TV When you select a Dolby Digital or MPEG audio track the sound is converted to the PCM 2ch format and output Audio Preference digital only Selects the audio track to output You can select MPEG or Dolby Digital MPEG If the programme has MPEG and Dolby Digital tracks select MPEG to output MPEG track in preference Dolby Digital If the programme has MPEG and Dolby Digital tracks select Dolby Digital to output Dolby Digital track in preference Manufactured under license from Dolby Laboratories LX D O L BY Dolby and double D symbol are trademarks of Dolby Laboratories DIGITAL Audio Only When listening to radio programs or listening to MP3 music under USB music play you can set Audio Only to Power Saving for energy save The backlight will turn off automatically after some seconds Select Normal then the backlight works
15. off Plug the power cord into an AC power outlet Press Power Switch on the TV LA A A Now the set is in standby mode Wait some seconds until the power indicator lights up then press POWER to turn Power Switch on the TV Be sure to wait some seconds before pressing POWER button If you promptly press POWER button then the TV may not respond or act wrongly Press button again to turn off the TV and put the TV in standby mode To cut offthe power completely press Power Switch on the O SOURCE TV FREEZE TV RADIO STEREO Warning When the TV is in standby mode power is still flowing into the TV To save power please press Power Switch to 4 2 3 completely cut off the power After you turn off the TV you should wait at least 5 seconds the power indicator goes out before you turn it on again S MODE FAV LIST P MODE Note If the TV does not receive a broadcast signal for several minutes the TV goes into standby mode automatically 15 Basic Operations Continued Input Source Selection Input Source DTV ATV AV Component D SUB HDMI1 HDMI2 USB OY Move Select To select the input source Press SOURCE button The Input Source list appears 2 Press vor a to select the input source then press OK or gt to confirm your choice The TV switches to the selected source Programme Selection Channel List 2 ABC T
16. or OK to open the Programme nenne Edit menu Auto Tuning DTV Manual Tuning ATV Manual Tuning Programme Edit Use v or 4 to select a channel you want to move File System Press YELLOW button and a move symbol appears alongside the selected channel in the list then use v or 4 to move the channel upward or downward to a desired new position Press YELLOW button again to finish the moving SELECT GG MOVE MENU RETURN Programme Edit 1 S 03 Repeat the above steps to move more programs 2 C 42 3 S 04 4 C 04 Note If the Programme Edit menu has more than one page you may press a or v to scroll the page upward or downward The order of the DTV channels is automatically assigned and cannot be changed by user Programme Edit Continued Skipping channels Auto Tuning DTV Manual Tuning ATV Manual Tuning Programme Edit File System OQO SELECT AY MOVE MENU RETURN Programme Edit 1 S 03 2 C 42 3 S 04 4 C 04 Deleting channels Auto Tuning DTV Manual Tuning ATV Manual Tuning Programme Edit File System QAO SELECT AY MOVE MENU RETURN Programme Edit 1 S 03 2 C 42 3 S 04 4 C 04 You can skip unnecessary channels so that only the channels you want to watch can be selected by CH 4 CH You can still tune to the skipped channel by using the number buttons 4 Navigate to the Channel menu press sorv to select Programme Edit press or OK to open the Programme Edit menu
17. 1 Jan 2011 15 30 Activate lt On Hour lt 00 Minute lt 00 lt Off Volume lt 30 lt NSW ACT GMT 1 Source lt DTV Channel lt 10 Close OY MOVE MENU RETURN Auto Sleep will bring the TV to standby automatically when there is no signal input except USB and Music source for a certain time Press MENU Press 4 orb to display Time menu press v toaccess Press or v to select Auto Sleep Press 4 or bto select On to turn on Auto Sleep To cancel the function select Off To close the menu press EXIT button To set ON timer ON timer feature allows you to set the TV to turn on automatically to a preset channel or source at a certain time and at certain volume Once you set ON timer it will effect every day Press MENU Press lt or gt to display Time menu press v toaccess Press 4a orv to select On Time Press bor OK to access the submenu Now the Activate item is highlighted press 4 or gt to select On to enable ON timer To cancel select Off After Activate is set to On press orv to go through the item list adding the details of the on timer by using 4 orb to make selections e Hour Minute Sets the desired time to turn on the TV e Volume Sets the volume level for the On Timer program e Source Sets the source to be viewed when the TV turns on e Channel Sets the channel that will be tuned when the TV turns on When finished use or v to select Close item and pre
18. 5 Repeat the above steps to label more channels Note The labels of DTV channels are automatically assigned and cannot be changed by user Programme Edit Continued Setting up a favourite channel list You can create a favourite channel list so you can quickly browse through your favourite channels by pressing FAV LIST then selecting a channel from the favourite channel list Navigate to the Channel menu press Aorv to select mute ning Programme Edit press or OK to open the Programme DTV Manual Tuning Edit menu ATV Manual Tuning Programme Edit Use vor to select your favourite program use FAV LIST File System button to mark the selected programme as favourite a favourite symbol appears To cancel the favourite mark just press FAV LIST button again and the symbol disappears If the programme list has more than one page you can press v or 4 to scroll the page OO SELECT AY MOVE MENU RETURN Favourite List v 22 ABC TV Repeat the above steps to set more favorite programs v 350 CH1 v 353 CH4 1 S 03 2 C 42 v 4 C 04 Press EXIT button to close the menu Now you can press FAV LIST button to display the favorite list press wor to browse through the favorite programs and press OK to access the channel AG Move Select Reorder rearrange channels ATV channels can be arranged in your favourite order analogue only Gs Navigate to the Channel menu press orw to select day Programme Edit press
19. Continued Aarel digital only File System Record Time lt 6Hr gt Select Disk lt 6 Check PVR File System Start EWT EXIT CoK OK meny Return GG Move OO Select File System Record Time Sele Che Create partition Create disk partition Warning All data will be lost Record Time Sele Chet File System Size PVR File System Type Hi Speed FS PVR File System Size All SD 294 Mins HD 84 Mins Record Time Sele Che Format Disk Do not unplug USB device Create PVR file system please wait EXT EXIT CoK OK menu Return GG Move COE Select File System Record Time Sele Ched Time Shift Size Time Shift Disk Size 5 GB SD 80 Mins HD 25 Mins EWT EXIT CoK OK menu Return GG Move Select File System Record Time lt 6Hr gt Select Disk lt G gt Check PVR File System Checking OY Move COE Select CXT EXIT Cok OK mEn Return gt C Check PVR File System From File System menu highlight Check PVR File System press OK to start 2 Now a dialogue box appears prompting you to start to create disk partition Highlight Start and press OK to proceed to format the disk all data will be lost Or select Exit to abandon and exit 3 Now File System Size screen pops up with PVR File System Type highlighted Hi Speed FS select for high recording speed and FAT32 can be selected with 4 orb button Note If Hi Speed FS is choosed it will occupy disk space ba
20. D Player etc Component cables often have red green and blue color coded video connectors and red and white audio connectors Match the colors when making connections Component video cable Audio cable O o D Sub cable To monitor port 15 pin D Sub To audio output jack Audio cable How to connect an HDMI device Connect the HDMI cable between the HDMI jack on the TV HDMI located at TV rear while HDMI2 at TV side and HDMI output jack on the device Note If your device has an HDMI connection we recommend you use that to get the best quality possible To play from the HDMI device Turn on your TV then press SOURCE button The Input Source menu opens 2 Press or vto select HDMII or HDMI2 correspondingly then press OK to confirm 3 Turn on the HDMI device and set it to the correct mode Refer to the instructions that came with the HDMI device Note If the external device has DVI output only use a DVI to HDMI adapter cable to connect to the HDMI terminal Connect the audio cable to the PC IN AUDIO jack on the TV rear To connect a component video device Connect the Component Video cable between the Y Pb Pr input jacks onthe TV and Y Pb Pr output jacks on the device Connect the Audio cable between the AUDIO input jacks on the TV and AUDIO output jacks on the device To play from the component video device
21. IAH mp3 l lt lt Fast reverse SENEE Al Bit Rate 184K a Play the previous PEACE mp3 Artist CHRISTMAS mp3 Sampling 44K pei Play the next EXIT Exit music play Year 2010 A BACK OK enrer ee OA er E Exit and return to USB main menu When USB main menu is on the screen you can press Press one or more times to select a repeat mode You can select repeat to play one music repeat to play all music files when it reaches end no repeat when it reaches end and go to USB main menu Note e When selecting file or folder from the list you can press 4 gt to scroll the page e When a music file is selected you can press OK button to mark it as favourite and a check mark appears press OK again to cancel the mark Do so to create your favourite music list then music play goes among these favourites To quickly select unselect all files inside this folder move the cursor to its volume row first row and press OK then choose Select or UnSelect Playing movie Generally video playback supports MPG MPEG MP4 TS TRP M4V RM RMVB formats but for the sake of technical updating some formats above may not be supported Be yp PHOTO MUSIC TEXT Page 1 1 To watch movie MSTPVR From the USB main menu press 4 or gt to select MOVIE menu and press OK to access TITANIC ts 2012 mov Press Aorv to navigate among your files or folders 3 Press u to play the
22. OFF timer ON timer you should set the clock first Press MENU Press 4 orb to display Time menu press v to access OY MOVE menu RETURN A For DTV programs you need to select your time ay zone Channel Press 4 orv to select Time Zone use 4 or gt to select your local area time zone Date ri 01 Then the clock will be automatically set by the TV signal Month lt Jan source based on the time zone you selected Sleep Timer S Year lt 2011 Auto Sleep Hour lt Off Time On Time B For ATV programs and the clock is not set press a orv to select Clock press gt or OK to access its setting menu Within the menu use a orv to highlight the Date Month Year Hour or Minute item anduse 4 orb to adjust the values When finished use 4 or v to select Close and press OK to confirm the setting and close this sub menu Time Zone Close OS SELECT OY MOVE menu RETURN 3 Toclosethemenu press EXIT button Setting OFF timer To set OFF timer You can set OFF timer to switch the TV to standby at a specified time Once you set OFF timer it will effect every PT E sess Channel 01 Jan 2011 15 30 Press MENU Press 4 or to display Time menu press v toaccess Hour lt 00 gt Press a orv to select Off Time press or OK to Minute lt 00 gt i Auto Sleep access its setting menu Time Zone Sleep Timer Close Now the Activate item is highlighted automatically Se ler A M GENS RETURN press
23. OWNER S MANUAL Paisonic 55CM WIDE SCREEN LED LCD TV MONITOR MODEL TFTV553LEDR C N111 PALSONIC 1 JOYNTON AVENUE WATERLOO NSW 2017 AUSTRALIA TEL 02 9313 7111 FAX 02 9313 7555 PALSONIC CUSTOMER SERVICE TELEPHONE AUSTRALIA 1300 657 888 Contents Contents Important Information Important Safety Precautions Important Notice Identification of Controls Preparations Making Connections First Time Configuration Basic Operations Memorizing the Channels Programme Edit Adjusting the Picture Adjusting the Sound Adjusting Basic Settings Adjusting the Computer Image Setting Clock amp Timer Setting Child and Rating Locks Making Use of PVR recording Function Teletext amp Subtitle Using USB Multi Media Player Troubleshooting Specifications 20 23 24 25 26 28 30 34 35 38 39 IMPORTANT INFORMATION If a television is not positioned in a sufficiently stable location it can be potentially hazardous due to falling Many injuries particularly to children can be avoided by taking simple precautions such as e Using cabinets or stands recommended by the manufacturer of the television e Only using furniture that can safely support the television e Ensuring the television is not overhanging the edge of the supporting furniture Not placing the television on tall furniture for example cupboards or bookcases without anchoring both the furniture and the television to a su
24. SB device to this port 4 HDMI2 Connect an HDMI device to this jack 5 Headphone amp S PDIF Connect headphones to this jack Connect a digital sound system to this jack 6 COMPONENT IN Connect a component video device to these jacks 7 AV INPUT Connect an AV device to these jacks 8 RF Connect an antenna to this jack 9 PC IN D SUB AUDIO Connect a computer to these jacks 10 HDMII Connect an HDMI device to this jack Identification of Controls Continued Remote Control POWER Switches the TV power on or Standby 2 FREEZE To freeze current picture 3 FAV LIST Displays the favourite channel list 4 S MODE Selects sound mode TVIRADIG STEREO 5 0 9 number buttons Press to enter channel numbers or input password 6 ASPECT Selects the screen aspect ratio SOURCE FAV LIST P MODE 7 MENU Displays the main menu screen 8 4 v 4 OK Press the arrows to navigate through the menus or adjust an item Press OK to confirm a selection or enter a sub menu 9 EPG Displays the Electronic programme Guide DTV only 10 VOL Increases or decreases the volume I 1 INFO Displays the information banner ASPECT 12 0 m INSTANT RECORD STOP button PVR recording menu 13 44 Fast reverse 14 14 Previous 15 SOURCE Displays input source menu 16 TV RADIO Switches between TV and Radio mode DTV only 17 STEREO Selects bilingual stereo or mono ATV only or audio track D
25. TV only 18 PMODE Selects picture mode 19 CD Returns to the previous channel 20 EXIT Exits the menu screen A 21 LIST Displays the channel list 22 MUTE Press to mute the sound Press again to restore the sound M 23 CH 4 v Changes channel up and down T SHIFT REC LIST 24 T SHIFT time shift button lt a Play Pause button when in time shifting or USB Media Play 25 REC LIST G button Shows Recorded List BACK button USB Media Play 26 Fast forward 27 Repeat mode select USB Media Play 28 gt gt Next A eee MK hale 29 Coloured buttons RED GREEN YELLOW BLUE Direct access to the coloured items or corresponding pages Teletext TTX Subtitle Hold Reveal 30 Teletext control buttons TTX Used to enter or exit teletext mode Teletext Subtitle Displays the subtitle or the teletext subpage Teletext Hold To stop or resume sub page acquisition Teletext Reveal To reveal or hide the concealed information Teletext Size Press this button several times to display the upper then the lower part of the screen and then return to the normal size teletext page Teletext Index Press this button to view the main index page Teletext Mix Press the button to display the Teletext on the screen with transparent background while viewing the TV programme simultaneously Teletext Update Press the button to view the updated teletext page Teletext 8 P
26. Turn on your TV then press SOURCE button The Input Source menu opens 2 Press or v to select Component then press OK to confirm 3 Turn on your external device and set it to the correct mode See the device s user guide for more information To connect a computer Connect a D SUB VGA cable between the D SUB jack on the computer and the D SUB input jack on the unit Connect an Audio cable between the AUDIO output on the computer and AUDIO input jack on the unit To play video from the computer Turn on your TV then press SOURCE button The Input Source menu opens 2 Press or v to select D SUB then press OK to confirm 3 Turn on your computer and adjust the display properties as required Making Connections Continued AV device connection for playback To connect an AV device such as VCR camcorder or game console Connect the Audio Video cables between the Audio L R Video jacks on the TV and AV device To play the AV device Cobles are open eslor soe Turn on your TV then press SOURCE button The Input to connectors Connect Source menu Opens yellow to yellow red to red i itta whit 2 Press or v to select AV then press OK to confirm 3 Turn on your VCR insert a videotape and press the Play button To connect a VCR for recording Connect an AV cable to the AV OUT jacks on the side of your TV and to the AV IN jacks on the back of the VCR QA i AV cable To record
27. V Sydne 20 ABC HDTV 21 ABC2 22 ABC TV 350 CH1 351 CH2 352 CH3 353 CH4 354 CH5 355 CH6 Move Select Favourite List bd 2 ABC TV Sydne v 22 ABC TV w 350 CH1 v 353 CH4 v 1 S 03 e 2 C 42 v 4 C 04 AO Move Select Channel List 1 S 03 2 C 42 3 S 04 4 C 04 Select Favourite List v 2 ABC TV Sydney v 22 ABC TV e 350 CH1 e 353 CH4 v 1 S 03 v tv 2 C 42 v 1V 4 C 04 AG Move Select Digital programme selection After you have tuned the TV you have several ways to select DTV programmes Be sure to select DTV through the Input Source menu See the above steps for source selection When watching digital programme and you want to listen to radio simply press TV RADIO button to switch To return to TV program press TV RADIO button again When watching analogue programme the TV RADIO button does not work e Press CH 4 or CH v to go to the next or previous channel The skipped channels can not be selected e Press the number buttons to directly select any channel you want then wait for the channel to change Note Button presses must be within three seconds of each other e Press LIST to display the Channel List then press or 4 to select a channel and then press OK e After you have created the favorite channel list you can press FAV LIST button to display the favorite channel list Use 4 orv to select a channel and then press OK e lo go to the previous channel viewed press Co
28. a program Turn on your TV then select the programme you want to record 2 Turn on your VCR then insert a videotape VCR for recording 3 Press RECORD on your VCR to start the recording Note Only TV and AV programs can be recorded 14 First Time Configuration Basic Operations Initial setup The first time you use the TV you need to configure your TV To configure your TV Make sure that you have inserted the batteries in the remote control have connected your antenna to the TV properly and have connected the AC power 2 Press the Power Switch on the TV then press POWER to Installation Guide turn on the TV Channel Tuning gt Now the Installation Guide screen appears with Channel Start Exit Tuning highlighted Press OK to begin the auto tuning for all available channels first for ATV then DTV including Radio channels It may take several minutes please wait until it is Channel Tuning finished 2 78 50MHz ATV rT ATV 2 Programme s DTV 0 Programme s When complete it will go to digital programme position one pado i U rosu Now channel list has been created and you can start to watch TV During searching the screen will display a report about found stations Press lt Menu gt to skip Press lt Exit gt to exit Note During ATV tuning if you want to skip it and goto DTV tuning press MENU To exit tuning press EXIT Turning the TV on or off To turn the TV on or
29. ase call the services center in your local area Before calling service please check the symptoms and follow suggested solutions Problem Possible Solutions The batteries could be weak Replace the batteries Remote control does not operate Check the orientation of the batteries Make sure the power cord is plugged in Make sure the power cord is plugged in Press POWER on the TV or on the remote control Try another channel it could be station trouble Dark poor or no picture Select a proper picture mode Adjust the brightness in the video setting e Check the antenna connection No color dark picture abnormal color Adjust the color saturation in the video setting Only snow and noise appear e Check the antenna connection on the screen e Iryanother channel it could be station trouble e Adjust the antenna e Movethe TV away from noise sources such as cars neon signs or hair dryers Double images e Usingahighly directional outdoor antenna may solve the problem Good picture no sound e Thesound may be muted Press MUTE again to cancel e Communication problems may occur if infrared communication Audio noise equipment e g infrared cordless headphones is used near the TV Move the infrared communication equipment away from the TV until the noise is eliminated e These channels may be set skipped You may cancel the skip setting through the menu or select them with number buttons No picture screen not lit No sou
30. ata or format a partition to completely clear those unnecessary data e Certain types of memory device such as some USB devices may not be compatible with this TV MB Checking file system of the external memory device To check PVR File System Ves Picture Sound Connect your USB device or portable hard disk to the USB port on TV ene side firstly DTV Manual Tuning ATV Manual Tuni A A la 2 Navigate to CHANNEL File System menu to check file system Programme Edit File System Press MENU then use 4 or gt to select CHANNEL menu press v to access Press or v to highlight File System then press gt to access SELECT MOVE RETURN Now do the following to check file system A Set Record Time From File System menu highlight Record Time press 4 or gt to set the recording length of time PWR RECORD ALL Hr 6Hr can be selected Note The record time also depends on your timer setting through the EPG and your disk space If the recording timer setting is shorter then the timer setting has priority over the Record Time setting at the File System menu BID EXIT COKDOK GE Return OO Move OO Select B Select Disk From File System menu highlight Select Disk press gt to access Use 4 or gt to select a disk then move the highlight to OK box and press OK to confirm To cancel select EXIT to exit Instructions continue on the next page 30 Making use of PVR recording function
31. bove No Block R Restricted viewing Not for children under age 17 Strong elements of sex and or violence Press MENU to return to previous menu Press EXIT to close the menu directly Restoring factory default To restore factory default Caution When you restore factory default all settings EEK n LIN O IN including password will be cleared and reset to default the w PS 5 ae assword is reset to 0000 So make sure d tt Picture Sound P you ao Want to reset the settings to its original factory condition before you perform this operation Navigate to the Lock menu and input the correct password to access Press 4 or v to select the Restore Factory Default item andthen press gt or OK OAO SELECT OY MOVE CWENU RETURN F i i A message appears prompting you to confirm again 3 Use 4orbtoselectbetween YES to reset or NO to cancel item and press OK to confirm 4 Press MENU to return to previous menu Press EXIT to close the menu directly 29 Making use of PVR recording function Adia lt digital only This TV provides PVR personal video recorder recording function which allows the viewer to pause and rewind any DTV program that is time shifting function as well as record and play back selected programs The program content will be recorded ina digital format onto an external memory device such as USB device memory card or other mass storage device Below all operations in this se
32. ction reguire the external memory device be connected with the TV Otherwise the operation can not be done Before proceeding please pay attention to the following notes e About Copyright The unauthorized recording use copying distribution or revision of television programs is prohibited under the copyright laws of the Australia and other countries and may subject you to civil and or criminal liability e Before PVR recording you need to check the external memory device s File System successfully e Do not disconnect the memory device from the TV while recording or the data will be lost e When PVR recording Time Shifting a directory will be automatically created at the external memory device to temporarily save the data e The data cannot be played on any other product or computer Also the data can not be played on the TV through the USB input source e The recorder once in time shift mode will continue recording what you are watching and overwrite any information already on the memory device e If malfunction then information already on the memory device may lose So please back up your memory device data e When Time Shifting the external memory device need to write and read data simultaneously So during the process it may occur slight picture sound pause or standstill depending on the memory device s speed and stability e After PVR recording Time Shift you can connect the memory device to your PC to delete temporary d
33. ed channel s now and future programme events are listed Use 4 or v to navigate among the programme events To quickly navigate among the list press RED button to go to previous day list and GREEN button to next day list and press INFO button to get more detailed information if available about the programme you choose 22 Sep 2010 09 00 3 gt Toclosethe EPG press EXIT or EPG button Note e The above OSD is only served as an example The availability of EPG information depends upon the broadcaster e To enable EPG to work properly it is suggested to set the appropriate time zone Basic Operations Continued On screen menu overview H List of main menus to help you with operations PICTURE menu SOUND menu wey ar a l A mya A 770 ps N So 2 T go H Picture Channel Picture Mode Sound Mode Contrast Treble Brightness Bass Colour Balance Sharpness Auto Volume Tint Surround Sound OCS SELECT OY MOVE menu RETURN OCS SELECT AO MOVE menu RETURN PEAD T l PIAN EELT i 7 M a 1 I A N A N x ir 2 1 ver Kal ax fl A Channel Channel Clock 01 Jan 2011 15 30 Off Time off Hearing Impaired off On Time Off S PDIF Output AUTO Sleep Timer lt Off Audio Preference Dolby Digital Auto Sleep lt Off Audio Only Normal Time Zone lt NSW ACT GMT 10 gt OY MOVE menu RETURN OS SELECT OY MOVE MENU RETURN LOCK menu CHANNEL menu Channel Lock System Auto Tuning Set Passw
34. end play times Next programme name and start and end play times TV or Radio Audio mode audio track Signal strength for current channel Note Signal resolution The above OSD is only served as an example and it is Subtitle teletext availability in DTV mode Video format of the current programme SD HD Information banner content varies depending on the Parental rating G PG M MA etc broadcaster and your settings AAA Using the EPG digital only The Electronic Programme Guide EPG makes it possible for users to see details about the programme they are watching other programmes and even a schedule of the next 7 days if 2 ABC TV Sydney available The information available includes the number and British Isles A Natural History name of the channel the name of programme the start and end time and a summary Thus viewers can easily get 22 Sep 08 47 09 05 information about future programmes 22 Sep 09 05 10 00 Designers Agriculture 22 Sep 10 00 10 32 Midday Report To use EPG 22 Sep 10 32 11 31 22 Sep 11 31 12 03 Men Behaving Badly Press the EPG button to open the EPG In the EPG 22 Sep 12 03 12 33 The Lenny Henry Show window as shown on the left current channels now and upcoming program s information will be displayed 2 At upper screen the channel number name is shown you can use 4 orb to select a channel whose information you want to know At the lower screen this select
35. i PLAY PAUSE button m STOP button 11 AAA SEES ed gt P 44 Fast forward rewind Play Pause Stop GREW OF Prev Eet DI I lt lt Previous next Duration 33 Teletext amp Subtitle Teletext amp Subtitle Q FREEZE TV RADIO S MODE FAV LIST 2 ASPECT MENU T SHIFT Ph m TTX Subtitle Hold Size Index Mix SOURCE STEREO P MODE A Vv REC LIST Reveal Update What Is Teletext Your System receives Teletext signals broadcast by a TV network and decodes them into graphical format for viewing News weather and sports information stock exchange prices and programme previews are among the many services available Mi To Turn On Off Teletext Select a TV channel providing the Teletext program Press TTX button to display the teletext Press TTX button again to switch back to TV screen HH Teletext control button list e a v button Used to scroll page upward or downward e 0 9 button Directly select any page by using 0 9 e Coloured buttons RED GREEN YELLOW BLUE Coloured areas are displayed at the bottom of the screen The 4 coloured buttons are used to access the items or corresponding pages e Hold button Certain pages contain sub pages which are automatically displayed successively This button is used to stop or resume sub page acquisition e Reveal button Press the button to reveal the concealed information such as games solutions Press the bu
36. in the search for that multiplex At the bottom of the menu screen the DTV Signal strength bar is displayed You can make use of it to check how strong your Div Manual Tuning DTV signal is and whether you need to adjust your antenna The higher the signal strength is the less likely you are to experience picture degradation OQA SELECT AY MOVE MENU RETURN UHF CH lt 23 gt Please select channel then Press OK to search DTV 4 When the multiplex is found any channels that are not currently Radio 2 in the channel list will be added and the channel information will Bad Normal Good be updated TEES During the process you can press MENU or EXIT to exit the ad search Memorizing the Channels amp Programme Edit AMATI analogue only Use the Manual Tuning operation if desired channels can not be preset by Auto Tuning or if you would like to preset channels to specific position numbers one by one In Channel menu press v ora to select ATV Manual Tuning then press gt or OK to access the setting menu Auto Tuning DTV Manual Tuning From ATV Manual Tuning setting menu press v or 4 to select ATV Manual Tuning an item press 4 or b toset the item as shown below Programme Edit File System A Storage To Position selection Press 4 or gt button to select the position you want to store B System Sound system selection If certain channel s sound is abnormal it may be that the sound system setting is wrong In ATV Manual
37. ing photo or folder from the list you can press 4 gt to scroll the page e When the highlight rest ona file for some seconds its content preview will appear automatically Playing text ying Text play supports TXT format but for the sake of technical updating not all TXT format files can be played oyp PHOTO MUSIC MOVIE Page 1 1 To view text MSTPVR From the USB main menu press 4 or gt to select TEXT menu and press OK to access WORD txt POMA R 2 Press a orv to navigate amongfiles or folders 4 ack OK ENTERS LT PA SLA 3 Press to open the highlighted file and show its text or press OK to open the highlighted folder During text playing you can press E ia Y a A signal that reaches beyond the s Play the text eee Viewing aren of Ghpiay screen A KK Go to the previous Page 1 1 slight overscan is generally not nolicable on atv ret but bs pri Go to the next apparent on a computer monitor a v Scrollthe content MSTPVR where taskbars are typically at the extremeendsoftheviewingarea EXIT Exit text playing A E Exit and return to USB main menu HW FOXMAIL txt Note When selecting file or folder from the list B BACK OK ENTER 4 SELECT PAN PLAY PAUSE you can press lt gt to scroll the page Troubleshooting BE Troubleshooting guide general If after reading these operating instructions you have additional questions related to the use of your television ple
38. into effect and these locked programmes are blocked To viewed locked programmes just input the password To disable the lock system set Lock System to Off and all locked programmes can be viewed Setting Child and Rating Locks Continued Jade TES digital only To set and enable parental ratings k ss Some digital broadcasters rate their programmes according to age Picture sound i pti You can set your TV to display only programmes with age ratings Lock System higher than your child s age Before setting parental ratings you Set Password have to enable the lock system Block Programme Parental Guidance lt No Block Restore Facton Derai Use password to access Lock menu highlight Lock System and use 4 or gt to select On to enable the lock system SAE Se CED Is Press aor to highlight the Parental Guidance use 4 or b to select an age rating All programmes beyond the D cige tones esis selected age rating will be blocked You can select PG Parental Guidance Suggested PIGEK AI Content is such that parents may not want Block G and above their children to view the programme Block PG and above G General Audiences Content not M Mature Audience Suitable for mature audience Block M and above MA Mature Adult Audience May contain Block MA and above mature themes profane language graphic Block AV and above violence and sexual situations AV Adult Audience Strong violence Block Rand a
39. ished highlight Close and press OK Start Time 22 Sep 2011 08 47 End Time 22 Sep 2011 09 05 e End Time Highlight End Time then press gt to open its pop up menu Press v or a to select Year Month Date OO Select OO Move OSchedule ORETURN ox Hour Minute item use 4 or gt to adjust the setting When finished highlight Close and press OK Note Future program recording can be done in standby mode During recording in standby the backlight is off while the Indicator turns blue to remind you that the set is at recording Pressing POWER button can turn on the backlight Once the timer reached this program will be recorded and During recording do not change channel or source Stored at the connected external memory device If you do want to change channel or source a reminding message will pop up elf no disk space left a warning will pop up and the recording stops C Be sure to press OK button again to save the timer D Repeat the above steps if you want to schedule more program recording Note that only one program can be recorded at the same time 32 Making use of PVR recording function Continued Adale a digital only Ni i When you have scheduled future program recording through EPG Mi Editing Recorder List window successfully you can call out the RECORDER LIST to know your schedule list Also you can delete some unwanted recording 22 Sep 2011 11 90 schedule from the window HEOUR IES LU
40. itable support Not standing the televisions on cloth or other materials placed between the television and supporting furniture Educating children about the dangers of climbing on furniture to reach the television or its controls Warning To prevent the spread of fire keep candles or other open flames away from this product at all times Important Safety Precautions Electrical energy can perform many useful functions but it can also cause personal injuries and property damage if improperly handled This product has been engineered and manufactured with the highest priority on safety But IMPROPER USE CAN RESULT IN POTENTIAL ELECTRICAL SHOCK OR FIRE HAZARD In order to prevent potential danger please observe the following instructions when installing operating and cleaning the product To ensure your safety and prolong the service life of your TV product please read the following precautions carefully before using the product Read these instructions All operating instructions must be read and understood before the product is operated 2 Keep these instructions These safety and operating instructions must be kept in a safe place for future reference 3 Heed all warnings All warnings on the product and in the instructions must be observed closely 4 Follow all instructions All operating instructions must be followed 5 Attachments Only use attachments accessories specified by the manufacturer Do not use attachme
41. ith the cloth carefully identification of Controls Mi Front View Bottom View 2 O SOURCE MENU V CH A vou 3 4 5 6 7 Note Buttons on the TV control panel CH x VOL MENU SOURCE POWER 0 are touch buttons First touch of the button will illuminate it Second touch will fulfill its function Be sure button presses must be quickly done before the illumination disappears Mi Back View 10 Hmi RECN IO D Sub e is 9000995 Main Unit Front View Bottom View Back View Remote sensor Receives signals from the remote control Do not block 2 Power indicator Lights blue when in operating mode Lights red when in standby mode 3 POWERO Press this button to turn the unit ON from STANDBY mode Press it again to turn the set back to STANDBY 4 SOURCE To access SOURCE menu 5 MENU Press this button to access the main menu screen 6 CHAN v Press these two buttons to directly change the TV channel In menu operations also serve as up down buttons 7 VOL Press the VOL or VOL button to directly increase or decrease the sound volume level In menu operations also serve as right left buttons 8 Power Switch RS 232 For service only Do not use 2 AV OUTPUT Connect a VCR to these jacks to record programs 3 USB port Connect a U
42. mpletion of service or repair work request the service technician to perform safety checks to ensure that the product is in proper operating condition 14 Wall or ceiling mounting When mounting the product on a wall or ceiling be sure to install the product according to the method recommended by the manufacturer This is a safety feature 4 Important Safety Precautions Continued 15 Stand Use only with the cart stand tripod bracket or table specified by the manufacturer or sold with the apparatus Do not place the product on an unstable trolley stand tripod or table Placing the product on an unstable base can cause the product to fall resulting in serious personal injuries as well as damage to the product When mounting the product on a wall be sure to follow the manufacturer s instructions Use only the mounting hardware recommended by the manufacturer 16 Careful move When a cart is used use caution when moving the cart apparatus combination to avoid injury from tip over Sudden stops excessive force and uneven floor surfaces can cause the product to fall from the trolley Never attempt to move the TV unless the AC power cord has been disconnected 17 Lightning Unplug this apparatus during lightning storms or when unused for long periods of time For added protection for this television equipment during a lightning storm or when it is left unattended and unused for long periods of time unplug it from the
43. nd Screen lit good sound Dotted lines or stripes One or some channels cant be displayed e These channels may be locked or blocked you may go to LOCK menu and set Lock System to Off e You may use the super password 2580 e If a setting option appears in gray this indicates that the settings Some items can t be accessed option is unavailable in current input mode When the TV is in use there is a natural rise in temperature causing the cabinet to expand or contract and may be accompanied by a slight creaking noise This is not a malfunction V cabinet creaks During the timing of USB device detection i e when the TV is turned on with USB device connected or when you plug in USB device during TV working the TV may not act by remote control buttons in such case Wait some time then it is OK Remote control command is not effect in some cases Disconnect the power cord and wait for a few seconds Then re plug the power cord and turn on the unit again Control buttons do not operate When you push POWER SWITCH to power on the TV in about 3 POWER button responds slowly seconds the POWER button starts to respond after pressed after power is connected 38 Specifications Integrated Digtal TV Analogue TV system PAL B G CCIR NTSC AV Digital TV system Compliant Standard DVB T 7 MHz Bandwidth Video Decoding MP ML amp MP HL Audio Decoding Dolby Digital MPEG 1 amp II
44. nd speed information will appear they can not be adjusted Note e After PVR File System checking if SD Fail appears on the screen that indicates this external memory device is not suitable to be used for recording please replace with other one and try it again If SD Support appears that means this external device is suitable to record SD program but not HD program If HD Support appears then both SD and HD programs are OK File System Record Time lt 6Hr Select Disk lt C Check PVR File System SUCCESS EXT EXIT CokK OK menu Return GG Move CE Select 31 Making use of PVR recording function Continued Adia lit digital only You can record DTV programs in two ways instant recording and timer recording IHN Instant recording current program recording To record a programme instantly simply press the e m button on your remote control Selecta DTV programme you desired to record press Current time e m button to begin recording Channel name Now a control bar will appear at the bottom screen for you to Recording 24 57 control 00 00 03 ie iNews 0000 07 50 From the control bar you can obtain information such as channel OR ews 01 name programme name current time and recorded length Program name Duration duration etc After some seconds this control bar will be minimized in size and Recorded length glitter on the bottom right corder To re
45. normally Adjusting the Computer Image PC only Before adjusting the screen make sure that you select the correct source D SUB To adjust the computer image SES Press MENU The on screen menu opens with Picture menu acrecn displayed Press or v repeatedly to scroll the menu page until you select the Screen item then press or OK to access Press v or 4 to highlight an option press 4 or to adjust GE SELECT GO MOVE ED RETURN the level or press OK to confirm You can select e Auto Adjust Automatically adjusts the image settings such as position and phase Horizontal Pos Moves the image right or left Auto Adjust R Te Ea Vertical Pos Moves the image up or down Vertical Pos Size Adjust the horizontal width of the image on the Size screen Phase e Phase Adjusts the focus of stable images KT TE To close the menu press EXIT button Setting Clock amp Timer Setting TV clock To set TV clock For DTV programs the clock displays the current time A using time data received from your TV service provider This Gp information is based on a digital channel and does not need Channel to be set manually but you need to select your time zone 01 Jan 2011 15 30 firstly Off Time off gt On Time Off gt For ATV programs if the clock is not set you may set the Sleep Timer lt off gt clock manually Auto Sleep lt Off i mine zone L NEWACT CATEG gt To set
46. nts not recommended by the manufacturer Use of improper attachments can result in accidents 6 Power source This product is intended to be supplied by a listed power supply indicated on the marking label If you are not sure of the type of power supply to your home consult your product dealer or local power company For added protection for this product during a lightning storm or when it is left unattended and unused for long periods of time unplug it from the wall outlet and disconnect the cable system 7 Power cord protection Protect the power cord from being walked on or pinched particularly at plugs convenience receptacles and the point where they exit from the apparatus NOTE where the mains plug or an appliance coupler is used as the disconnect device the disconnect device shall remain readily operable 8 Overloading Do not overload wall outlets extension cords or convenience receptacles on other equipment as this can result in a risk of fire or electric shock 9 Entering of objects and liquids Never insert an object into the product through vents or openings High voltages are present in the product and inserting an object can cause electric shock and or short internal parts For the same reason do not spill water or liquid on the product 10 Servicing Refer all servicing to qualified service personnel Servicing is required when the apparatus has been damaged in any way such as power supply cord or plug is damaged
47. o 40 C The extended use of fixed image programme material can cause a permanent after image on the screen This background image is viewable on normal programs in the form of a Stationary fixed image This type of irreversible screen deterioration can be limited by observing the following steps A Reduce the brightness contrast setting to a minimum viewing level B Do not display the fixed image for extended periods of time C Turn the power off when not in actual use Important Information Regarding Use of Video Games Computers Captions or Other Fixed Image Displays e Do not allow a still picture to be displayed for an extended period as this can cause a permanent after image to remain on the screen Examples of still pictures include logos video games computer images teletext and images displayed in 4 3 mode CAUTIONS e The permanent after image on the screen resulting from fixed image use isnotan operating defect and as such is not covered by the warranty e This product is not designed to display fixed images for extended periods of time To clean this unit wipe with a soft dry cloth If the surfaces are extremely dirty use a soft cloth dipped in a soap and water solution or a weak detergent solution e Use eyeglass cleaner to remove stubborn dirt from the screen e Never use alcohol paint thinner or benzine to clean this unit e Before using a chemically treated cloth read the instructions that came w
48. o adjust the option picture Mode Ifa sub menu exits press or OK to access You can select Contrast prightnees e Picture Mode Selects the picture mode You can select Colour Dynamic a bright and vivid picture aed Standard a standard picture In Mild a soft picture OO SELECT OO MOVE MENU RETURN User user customized picture Press m orato Note You can also press RMODE to select the picture mode scroll the menu e Contrast Adjusts the contrast e Brightness Adjusts the brightness e Colour Adjusts the colour saturation e Sharpness Adjusts the sharpness Fae rages woul e Tint Adjusts the image tint Only for NTSC system Noise Reduction lt Middle e Colour Temperature Selects the colour temperature You Overscan gt On can select Warm to enhance the reds Cool to enhance the Adaptive Contrast lt On blues or Normal e Aspect Ratio Selects the aspect ratio of the picture You can select SELECT AO MOVE CWENU RETURN 16 9 Shows a full screen picture in 16 9 mode In D SUB mode press v 4 3 Shows picture in 4 3 display mode Recommended not to scroll to next screen let TV remain in this mode for extended period of time as to protect the screen Auto Selects the correct aspect ratio automatically Zoom Enlarges the picture vertically The top and bottom Screen may be cropped Zoom2 Enlarges picture both horizontally and vertically The edges may be
49. o update the channel list It is recommended that Auto Tuning is run periodically to ensure that all new services are added All current channels and settings e g locked channels will be lost Note As new services are broadcast it will be necessary to retune the TV in order to view them Auto Tuning DTV Manual Tuning ATV Manual Tuning Go to Input Source menu and select ATV or DTV first Programme Edit File System Press MENU Press 4 or gt to select Channel menu press v to access OED SELECT AG MOVE MENU RETURN Highlight Auto Tuning item and press or OK to access ce Now a Pop up screen opens with Australia as default country at and Start is highlighted Now simply press OK to begin the auto tuning If you want to cancel press b to select Cancel and press OK All ATV DTV channels available in your area will be searched and stored into memory Please wait until the searching is complete Channel During the process if you want to skip press MENU To exit OO SELECT AG MOVE WEND RETURN searching press EXIT This feature is available for service engineers or can be used for direct channel entry if the multiplex channel is known In Channel menu press v or to select DTV Manual Tuning then press or OK to access Auto Tuning DTV Manual Tuning ATV Manual Tuning Programme Edit File System Highlight UHF CH item press 4 orb button to select your desired multiplex number Press OK to beg
50. ord DTV Manual Tuning Block Programme ATV Manual Tuning Parental Guidance lt No Block Programme Edit Restore Factory Default File System OCS SELECT OY MOVE menu RETURN OQA SELECT AY MOVE MENU RETURN Note eDepending on the signal tuned you may see different menu options on your screen The above main menus are illustrated under TV mode eMenu items that are not selectable are grayed out If without special indication this manual is described under TV mode e The illustrations and on screen displays in this manual are for explanation purposes some are enlarged others cropped and may vary slightly from the actual ones li To operate the OSD on screen display menu e Press MENU to call up the OSD main menu The screen will now display Picture menu e Press 4 orb one or more times to select menu press v to access Picture Sound Time Option Lock Channel menu can be selected e From the menu press v 4 gt to navigate or adjust Press OK to confirm an entry or selection e lo return to previous menu press MENU e To close the menu press EXIT 18 Memorizing the Channels Note If the Lock System is On Auto Tuning DTV manual tuning ATV manual tuning can not be operated without password For details please see lt Setting Child and Rating Locks gt section When in PVR recording time shifting Channel menu can not be accessed Auto Tuning Auto Tuning will completely re tune the TV and can be used t
51. reparations Installing and removing the stand If the stand is provided please read these instructions thoroughly before attempting this installation You must install your TV into the stand in order for it to stand upright on a cabinet or other flat surface If you intend to mount your TV ona wall or other vertical surface you must remove the stand column Cautions Make sure that you handle your TV very carefully when attempting assembly or removal of the stand If you are not sure of your ability to do this or of your ability to use the tools necessary to complete this job refer to a professional installer or service personnel The manufacturer is not responsible for any damages or injuries that occur due to mishandling or improper assembly The speaker is not intended to support the weight of your TV Do not move or handle your TV by the speaker This can cause damage to your TV that is not covered by the manufacturer s warranty Before attempting assembly or removal of the stand unplug the AC power cord IW To install the stand Carefully place your TV screen face down on a cushioned clean surface to protect the screen from damages and scratches 2 Secure the stand to the TV with the three provided screws HM To adjust the viewing angle e Tiltthe screen forward 5 or backward 10 Caution When adjusting the viewing angle be careful not to tip over your TV Mi To install a wall mount bracket no
52. sed on your PVR File System Size setting while FAT 32 will not elf Hi Speed FS is choosed then press v to highlight PWR File System Size use 4 or gt to select a size the greater the size the longer you can make recording The next line will show the recording time allowed for example if shows SD 294 Mins HD 84 Mins that means recording SD programs can last 294 minutes while for HD programs only 84 minutes is allowed at your disk Then highlight OK and press OK to start formatting the disk The format may take several minutes please wait When finished Time Shift Size setting screen will pop up elf FAT32 is choosed then PVR File System Size can not be set The screen will show the recording time allowed Highlight OK and press OK to start formatting the disk The format may take several minutes please wait When finished it starts to check recording speed 4 After you choosed Hi Speed FS and set size and the format is finished the Time Shift Size screen pops up Use 4 or gt to set Time Shift size for time shifting the time shift size ranges from 512MB to 8GB the greater the size the longer the duration allowed for time shifting then highlight OK and press OK to proceed to check recording speed Checking speed may take several minutes please wait When finished if SUCCESS appears at the Check PVR File System line then you can start PVR recording function At File System menu bottom screen USB Disk state a
53. selected movie full screen or 2 E sack 08 enter sevect 71 PLAYIPAUSE press OK to access the folder to select your desired movie to play Using USB Multi Media Player continued Playing movie continued During movie play you can press i Play pause m Stop playing Fast forward Fast reverse Page 1 1 Subtitle Shows subtitle ifavailable STEREO Selects audio track if available MSTPVR EXIT Exit movie play Exit and return to USB main menu Size 101 MBytes A ar AACR When USB main menu is on the screen you can press one or more times to select a repeat 2012 mov mode You can select repeat to play one movie repeat to play all movies when it A sack ox ENTER SELECT A1 PLAYIPAUSE reaches end no repeat when it reaches end Also you can press RED button for A B repeat BLUE button for time search so that the play starts from the specific time e A B repeat During play you can pause and repeat any specified section simply by pressing RED button at the starting and ending points To cancel press RED button once again e Time search Press BLUE button to call out Input search time screen then use number buttons to input time use 4 gt to move the cursor and then highlight OK and press OK button for time search and the playback starts from the specific time Pressing INFO button can get time information from the screen Note e When select
54. sources Do not install near any heat sources such as radiators heat registers stoves or other apparatus including amplifiers that produce heat 22 Panel protection The display panel used in this product is made of glass Therefore it can break when the product is dropped or impacted upon by other objects Be careful not to be injured by broken glass pieces in case the display panel breaks 23 Pixel defect The display panel is a very high technology product giving you finely detailed pictures Occasionally a few non active pixels may appear on the screen as a fixed point of blue green or red Please note that this does not affect the performance of your product WARNING For continued safety apparatus with class construction shall be connected to a mains socket outlet with a protective earthing connection Important Notice IH About Temperature MB About After Image IH Cleaning and Maintenance Do notuse in hot and cold rooms locations e When the unit is used in rooms locations with low temperature the picture may leave trails or appear slightly delayed This is not a malfunction and the unit will recover when the temperature returns to normal e Donotleavetheunitinahotor cold location Also do not leave the unit in a location exposed to direct sunlight or near a heater as this may cause the cabinet to deform and the screen to malfunction e Storagetemperature 0 C to 50 C e Working temperature 5 C t
55. ss OK to close the sub menu Press EXIT button to close the main menu Press to switch the TV to standby mode At the preset time the TV will auto turn on and broadcast the preset programme at the preset volume Setting Child and Rating Locks You can prevent your children from watching TV by locking the TV and using age ratings To enable child lock and rating feature you must set Lock System to On through LOCK menu Also you can set Lock System to On to lock auto tuning manual tuning to protect some TV settings from being accidentally changed To cancel child and rating lock you can directly set Lock System to Off Setting or changing the child lock password To set or change the child lock password From LOCK menu you can set a new child lock password or to See change an existing child lock password By default the password is CERNE 0000 and you should change it To access LOCK menu to lock or unlock channels to view locked channels etc the child lock password is required Parental Press MENU Press 4 or b to display Lock menu press v to access Restore F Now a password is reguired to input Use number buttons to GO SELECT MOVE CHEN RETURN input the correct password the default password is 0000 tj Press Aorv to select Set Password and then press gt or or OK button to access its submenu Channel ae s Use the number buttons to inputa new password 4 digit Block Pro Input the new pa
56. ssword again Parental Now the new password has been created successfully Restore F A a Note Be sure to write down your password and retain it for future use If you do forget the password the unit provides a super password 2580 Please DO NOT let your children know the super password OCS SELECT AO MOVE menu RETURN Locking the TV programmes To lock or unlock the TV programmes Locking the TV programs prevents your children from viewing any channels which you do not want them to watch To use lock feature you have to enable the Lock System She Channel Navigate to the Lock menu and input the correct password to Lock System access Set Password still Now the Lock System item will be highlighted automatically llad aka Ke Use 4 or gt to select On to enable the lock system Restore Factory Default Use orv to highlight Block Programme item press gt or OO SELECT MOVE aa OK to access Now the Block Programme screen opens with a BICK Programme programme list displayed Use Aorvto select the 2 ABC TV Sydney programme you want to lock then press GREEN button to 20 ABC HDTV _ set lock to it A lock symbol appears alongside To unlock z pa press GREEN button again 350 CH1 Select other programs and press GREEN button to set lock to 351 CH2 them 352 CH3 353 CH4 Press MENU to return to previous menu Press EXIT to exit 354 CH5 the menu screen directly 355 CH6 Select Then the lock comes
57. store press OK 2 To stop recording press the button again Mi Timer recording future program recording EPG Electronic Program Guide is your on screen digital program guide for navigating selecting and discovering program event by time title channel You can also enjoy the scheduling of future recordings for up to eight days by setting the timer recording through EPG then go on vacation and come back to watch the program event as if it were live broadcast Press EPG button to open the EPG window 22 Sep 2011 08 50 2 Press 4 or gt button to select a channel you want to record 2A hee ela Press or 4 to navigate and select a desired program British Isles A Natural History t event 22 Sep 08 47 09 05 3 Press BLUE button to open RECORDER menu Now do the following operations E A Mode select From RECORDER menu highlight Mode item use 4orbto select a recording mode Once recording once Every Day recording everyday Weekly recording weekly or AUTO automatically record all Prev Day Next Day REC ed d y y episodes from one series can be selected EPG 14 May 2011 21 58 B If you set Mode to Once or Every Day or Weekly you can RECORDER set Start Time and End Time freely Programme News e Start Time Highlight Start Time then press gt to open its pop up menu Press v or 4 to select Year Month Date Hour Minute item use 4 or gt to adjust the setting When fin
58. t provided Note To avoid interference between the jacks wall mount bracket and wall the wall mount bracket must be more than 40 mm thick and the RF or VGA cable must have a 90 degree plug To attach your TV to a wall mount bracket not provided Carefully place your TV screen face down on a cushioned clean surface to protect the screen from damages and scratches 2 Remove the three screws that secure the TV to the stand base then remove the stand base 3 Remove the screws holding the stand column to the TV then remove the stand column 4 Secure the wall mount bracket to the back of your TV using the four screws provided with the bracket NOTE The appearance of this product in these illustrations may differ from your actual TV and is for comparative purposes only Preparations Continued Using the Remote Control MM Selecting a location You should selecta location for the TV eWhere direct light does not reflect on the screen e hat has indirect and soft lighting Where the TV has access to an antenna or cable TV connection eWhere the TV has access to a power outlet Note Watching TV in total darkness or with a reflection on the screen may cause eyestrain Mi Installing remote control Batteries Open the battery cover 2 Insert two AAA batteries into the battery compartment Make sure that the and symbols on the batteries match the and symbols inthe battery compartment
59. te sensor window of the main unit is under direct sunlight or strong lighting In such a case change the angle of the lighting or the TV set or operate the remote control closer to the remote sensor window 10 Making Connections Before you make any connections Cautions Before Connecting e When connecting an external device to the TV make sure that the TV and the device are turned off e Check the plugs on the ends of cables to make sure that they are the correct type before you try plugging them into jacks on the TV e Make sure that all plugs are securely inserted into the jacks Loose connections can result in image or color problems e The illustration of the external device may be different depending on your model e Refer to the operating manual of the external device as well Antenna connections Connect one end of your antenna cable to the RF jack on the back of the TV then connect the other end of the cable to the antenna wall jack Note e lt is recommended that the 75 ohm coaxial cable be used to eliminate interference and noise which may occur due to radio wave conditions e The antenna cable should not be bundled with the power cord and the like 75 ohm coaxial cable 34 id cable Ifthe antenna is not installed properly contact your dealer for assistance Power connection Connect the power cord to a power outlet Note e This product should be operated only from the
60. the word Stereo or Dual will appear on the screen each time you change channels disappearing after a few seconds If the broadcast is not in stereo the word Mono will appear Stereo Press STEREO button to select Stereo or Mono Bilingual Bilingual transmissions are rare If they are transmitted the word DUAL will display Choose the desired channel number and if the word DUAL appears press STEREO to select NICAM DUAL A NICAM DUAL B Mono NICAM broadcast or DUAL A or DUAL B German stereo bilingual broadcast For DTV programmes The digital TV transmission system is capable of simultaneous transmission of many audio tracks for example simultaneous translations of the programme into foreign languages or different commentators for sport events You can press STEREO button and then use or a to select the audio track Audio Languages MPEG English DoilbyD English Note The availability of these additional multi tracks depends upon the broadcaster Adjusting Basic Settings Adjusting the Computer Image Adjusting basic settings aa A Pan To adjust basic settings per i g Lock Option Press MENU The on screen menu opens Hearing Impaired Off Press 4 orb to display Option menu press w to access S PDIF Output AUTO Audio Preference Dolby Digital i i Press v or a to select an option press 4 orb to adjust the Audio Only Normal option OO SELECT GO MOVE CHEN RETURN To close the
61. tton again to hide the information e Size button Press this button several times to display the upper then the lower part of the screen and then return to the normal size teletext page e Index button In teletext mode press this button to display the index page e Mix button Press the button to display the Teletext on the screen with transparent background while viewing the TV programme simultaneously e Update button Press the button to view the updated teletext page e Subtitle button Press the button to display the teletext subpage if available Subtitle e For analogue programs if the programme has subtitle press Subtitle button to display subtitle on the screen To cancel press EXIT e For digital programs if the programme has subtitle press Subtitle button to display Subtitle Languages list and then use v or to select subtitle press OK to confirm To cancel the subtitle go to Subtitle Languages list use or to select Off and then press OK 34 Using USB Multi Media Player Notes about using USB You can connect a compatible USB device such as U disk portable hard disk MP3 card to your TV to view compatible photo movie text or play compatible music To use USB multi media player please go to USB source through Input Source menu by pressing SOURCE button Notes Never remove the USB device or turn off the TV while using the USB device It is recommended that you back up your USB device data
62. ture Sound Sound Mode Treble Bass To adjust the sound Press MENU The on screen menu opens Press 4 or b toselect Sound menu press v to access Press v or to highlight an option press 4 or b toadjustthe option You can select e Sound Mode Selects the sound mode You can select Balance Auto Volume Standard for normal programs Strcund Sond Music for musical programs Movie for movies OO SELECT OO MOVE GWENU RETURN e Sports for sports programs User for user setting sound mode Note You can also press S MODE on the remote control to select the sound mode Treble Adjusts Treble high sounds Bass Adjusts Bass low sounds Press v or to scroll the menu rt Sound 720 Picture Visual Impairment Mode Volume Balance Adjusts the balance between the left and right audio channels Auto Volume Turns on to equalize the overall volume OCS SELECT AO MOVE mENU RETURN levels for all channels Surround Sound Turns the Surround sound effect on or off Visual Impairment Sets the mix of visually impaired audio with regular audio When available visually impaired audio includes audio descriptions of on screen action Enable this by setting Mode to On also you can adjust the volume from this menu To close the menu press EXIT button Stereo and Bilingual transmissions For ATV programmes If stereo or dual language broadcasts are transmitted
63. type of power source indicated on the marking label e Always unplug the AC cord from power outlet when not using for a long period of time e This illustration is for reference only The AC plug may be different on different models Making Connections Continued Headphone connection To connect headphones Insert the plug of the headphone into the TV s Headphone jack When using headphones adjust the headphone volume so as to avoid excessive levels as hearing damage may result SZ 90080045 Headphones USB connection Insert your USB device into the USB port To play from the USB device Turn on your TV then press SOURCE button The Input Source menu opens 2 Press or v to select USB then press OK to confirm Never remove the USB device or turn off the TV while using the USB device For a full Home Theater sound experience you must connect your digital sound system to the S PDIF OUT Mini TOSLINK jack on the TV Optical Note e To connect to the S PDIF OUT Mini TOSLINK jack a S PDIF IN Mini TOSLINK adapter is required to connect an optical Optical Cable to this jack e The headphone output and S PDIF OUT share the same jack So when you want to use S PDIF please disconnect your headphone and vice versa 12 Making Connections Continued HDMI device connection HDMI cable ee DV

Palsonic N111 TFTV553LEDR User's Manual

Contents

Download Pdf Manuals

Related Search

Related Contents