Palsonic DVDR160G User's Manual
Contents
1. connect a 5 1 channel amplifier connect the player s 5 1 channel audio outputs to the amplifier s 5 1 channel audio inputs 3 To connect a digital amplifier connect the players digital Coaxial output or the optical output to the digital amplifier s digital input with either coaxial or optical cable 4 Connecting to other AV equipment please switch off power before connecting Yellow video Video cable white L I e Audio cable Red R E Hi rs s video cable E Additional AV devices to scart 2 DVD VCD or VCR player EMEN III Connect Video on front panel CVBS input terminal OUTPUT COAXIAL mmm Y RER Pb cb rN L gt VIDEO INPUT d m Od L7 N lt De Y Cb 2 100 240V 50 60Hz OUTPUT R Cr INPUT k ses ss AV cable uiti Or i Link cable Portable DV Card reader USB Note 1 If you want to record DV or USB contents you can use front jacks those jacks are on the right side of the front panel 2 The excellent image quality if you hold DV you can connect it to the unit by i Link connecting cables 3 The best image quality if your DV just holds component video output connect it to the unit by AV cables Connecting to TV set VCR DVB with DVD recorder I please switch off power before connecting VCR RF modulator lt Antenna To Anten2. 2 e Do not repair the unit yourself Opening or removing the cover may expose you to dangerous voltage or other hazards Refer all servicing to qualified service personnel Unplug the unit and apply for professional maintainer in such conditions below A Power plug or power lead is damaged B If liquid has been spilled or objects have fallen into the unit C The unit has been exposed to rain or water D If the unit does not operate normally when following the operating instructions E If the unit has fallen or the cabinet has been damaged F When the unit exhibits a distinct change in performance this indicates a need for service If the technician technician finds the substituted component is equal to original one in safety character after inspection or the manufacturer of substituted component detailed explain that this component is considered of anti fire anti electric or anti other disaster then this substituted component can be used The manufacturer note that the maintained unit should be undertake the safe inspection to ensure the unit security Please refer to the safety specification if you want install the unit on the wall Please install the unit far away from following items radiator oven and other heating including amplifier Note Our company would update the software and function if there are any difference with practical operation with instruction manual please refer to the unit real function Content
3. amp decoding technology of LSI LOGIC American company support multi recording modes 22 Special TIME SHIFTING PAUSE FAST FORWARDS FAST BACKWARDS SLOW the TV program won t miss any wonderful moment Time Shift buffer can be selected from 60 180 360 minutes 23 Support OTR one touch recording and OTS one touch stop recording time can be set convenient and fast 24 Chinese graphic user interface naming recorded program through built in Chinese phonetic input make management more convenient 25 Special effect playback such as immediate playback of recorded program playback in slow motion and fast forward and fast backwards playback in 32X speed etc fast program selecting you can choose as you like 26 Strong program management can delete protect name the program lock HDD as you like 27 Built in real time clock even power outage or power disconnection it can still run accurately and ensure scheduled timer recording to start on time 28 Support PIP picture in picture and dynamic display support traditional Chinese DIVX subtitle Chapter 2 Front panel Receiver window STANDBY LED display Rear panel VGA output HDMI output Optical output Operation interface Channel up Channel down Source Disc tray Open Close Record Play Pause USB socket i link DV socket Video input socket yellow Left audio input socket white Right audio input socket red YPbPr YCbCr output Antenna Input P
4. recording will start in few seconds During recording or record pause you can not change recording quality HDD playback Press HDD DUB key after power on to enter HDD menu move cursor to select desired title No Date Time Title Play and press ENTER key to play 001 CH007 01 01 01 17 02 Title 1 Delete Split After entering HDD menu press direction wa Rename Press Add Clear key to Select D Lock Program s Right and the system will show the function 05 Protect Press Dub key to copy selected sale oop xu s ao D Select Play and press ENTER key to L s de E play selected title Select Delete and press ENTER key to 46 For other options Press DVD TV VIDEO USB SETUP or TIMER delete the selected title from HDD M keys Note the title deleted from HDD can t be recovered Select Split is to divide a title into 2 or even more titles operation as follows move cursor to Split press ENTER key to enter title playback and wait until the time point that needs to divide press ENTER key and wait for seconds the time point will be divided Then the system will return to HDD menu and you can find there s one more title that is divided out Select Segment is to insert a chapter mark into selected title When playing title that needs to be marked each press of ENTER key will have one chapter segment inserted 9 Change index picture each title have a picture displayed on the u
5. Left It s used to adjust the dynamic range compression to increase Front Right the Volume of small detailed audio when you watch movie of large dynamic range with low volume and can t enjoy the small detailed audio It helps you not to disturb the neighbour or decrease the audio quality Speaker setup Only when Downmix is OFF can you enter this setup Front Speakers When speakers are set to ON there s audio output from the terminal of the channel When speakers are set to OFF there s no audio output from the terminal of the channel Centre Speakers When speakers are set to ON there s audio output from the terminal of the channel When speakers are set to OFF there s no audio output from the terminal of the channel Rear Speakers When speakers are set to ON there s audio output from the terminal of the channel When speakers are set to OFF there s no audio output from the terminal of the channel Subwoofer When set in On there will be signal sent out to Subwoofer output When set in Off there will be no signal sent out to Subwoofer output Centre distance To delay the time of audio out from centre speaker Rear distance To delay the time of audio out from rear speakers Channel distance To select test audio signal of each channel output from unit Centre Rear Left Rear Right Subwoofer System Lang Audio Lang Subtitle Lang ES Disc Menu Lang ER Date T
6. column and press ENTER key to enter programming playback The full name is Time Shift This function has the AUX in signal recorded in the HDD so that you can control the playback speed by pressing keys like F FWD F REW PAUSE etc The recorded signal won t be saved after power off or stand by When T Shift is ON If set Time buffer mode in Time Shift item of the setup menu to refresh the previously recorded content will be cleared after the system changes AUX in source including switching TV channel if you set that to preserve it will save the previously recorded content When T Shift is ON each time when you press direction key Left it will skip back to 10 seconds ago to play each time when you press direction key Right it will skip forward to 30 seconds later to play When T Shift is ON press T Shift to turn off the function and the system won t save the AUX in signals Chapter 3 Basic Playback Play DVD Disc Tiro DVD 1 Power on and put in disc 2 Start loading and playing the contents of disc automatically 3 When playing the disc choose the desired title by direction key and press ENTER to play 4 When playing the disc press DVD key back to disc title menu playback 5 Press RETURN key back to disc main menu playback Play VCD SVCD disc lt S VCD Super VCD should hold PBC playback control function and have a playing menu to choose PBC is defaulted on 1 Put in the dis
7. is not supported if there s no PDC in the TV signal sent out by TV station Put in MP3 JPEG Divx disc or plug USB File Manager AUDIO 00 00 00 00 00 00 with MP3 JPEG Divx file OSD will display 1 Don t go away a menu as follows Copy 3 Goodbye Brother Rename Move Create Dir Select all Unselect all Favorite Unfavorite Favorite list Move cursor to item need to play or edit Press ENTER key to enter item menu list playback Move cursor to desired file in the list and just press ENTER to play if you Right Operation OK Play hilighted file want to edit the file press direction key pud usd SS RIGHT to show the menu as the picture COPY to copy the file Move cursor to COPY and press ENTER key OSD will show the menu Select HDD to copy file to HDD Select DISC to copy file to disc Select USB to copy file to USB After select the carrier press direction RIGHT to show the instruction menu TO COPY to start copying the file Chapter 6 Additional information Usual Issues What is S Video cable S Video is also called SVHS which transfer luminance and colour signal This tiny pocket DIN faucet is also called HOSIDEN faucet What is composite video CVBS The socket is usually called CINCH socket which is used for transferring composite video signal FBAS CVBS In this way chromatism and luminance signal will be transferred together Connecting to other VCR After recorded cassette vid
8. off PBC function Note Definition of PBC the signal recorded in VCD or S VCD disc that can control the playback When playing the disc that contains PBC signal has the recorded information display on the TV screen as a menu which makes it convenient to select disc content to play In AUX operation mode if it s showed record to HDD on TV screen press DVD key to switch to record to disc DV USB When you connect DV or USB press DV USB to switch between DV and USB mode HDD DUB In HDD or AUX in operation mode press HDD DUB key to switch to HDD menu playback RETURN When playing DVD disc press RETURN key back to disc menu In PBC ON mode when play S VCD disc press RETURN key back to PBC menu playback ADD CLEAR Add or clear EDIT edit the recording content on the disc TIMER to enter timer recording setup menu Remote F REV F FWD r CHANNEL REVERSE SLOW SORT A B FUNC GOTO VIDEO ZOOM PIP STOP when playing disc press STOP key to stop playing when recording program press STOP key to stop recording PAUSE when playing disc press PAUSE key to pause playing when playing S VCD DVD disc press PAUSE key continuously to play the video pictures one by one when recording press PAUSE key to pause recording PLAY Play key VOLUME adjust the volume PREV NEXT If there are multi titles or chapters in the DVD disc you can choose the desired title o
9. that of TV VIDEO signal output from progressive RGB signal If the TV has more than one video inputs you may choose either one to connect Make sure you have properly connected the video and audio ports and switch the TV channel to the same input e g AV1 AV2 etc 3 HDMI jack contains not only digital video signal but also digital audio signal Connecting to amplifier If you have got an external amplifier you can connect the DVD recorder to the amplifier with reference to the below connections Please keep the equipment power off during connection Front Left Front Right 5 1 channel amplifier IE no digital decoder Surround Left Surround Right EB O Q m a 1 I Sn 5 1 decoded output speakers connection EE I EE VGA OUTPUT O Q SS MA N w Homi VIDEO J SUBWOOFER SURROUND R FRONT R 100 240V 50 60Hz Stereo amplifier ur Zo uit 000 Stereo speakers I I I I White l I 1 e qeo jeondo U 9 qeo jeixeoy Front Left Front Right Subwoofer E Surround Left Surround Right SR Digital decoding amplifier Notes Connect either one of the below amplifier 1 To connect a stereo amplifier connect the player s audio out L left and R right to the stereo amplifier s audio input left and right 2
10. 7 888
11. HDD to disc D When the unit is working load a blank recordable disc press HDD DUB key to enter HDD menu 2 Move direction key to select title that needs copy press ADD CLEAR key and system will display the title disc capacity it would take and how many titles you can select at the same time on the up side of HDD menu After selection press HDD DUB key to start copy During the process of copy system enter AUX in playback mode Note If the disc contains files of other mode or type it can not used to copy Rename disc Select Rename disc by direction key press Play title ENTER key to enter name disc menu After input the new name move cursor to confirm Rename disc press ENTER key to complete renaming Erase optical disc Erase disc p Waring This operation will Through this function you can erase all the erase all data in the disc Are contents on the disc Select erase disc by ae m5 direction key press ENTER key to erase Overwrite disc When the unit reads and shows the disc menu of the disc with recorded contents select Overwrite disc press ENTER to enter recording preparing mode select the source to record from press RECORD to record new contents Lock disc This function is to protect disc from being deleted its recorded contents by mistake Select Lock disc by direction key press ENTER key to lock Note when the recording hasn t finishe
12. Palsonic INSTRUCTION MANUAL DVD RECORDER DVDR160G DVD amp HDD DVD ReWritable PALSONIC CORPORATION PTY LTD 1 JOYNTON AVENUE WATERLOO NSW 2017 AUSTRALIA TEL 02 9313 7111 FAX 02 9313 7555 www palsonic com au PALSONIC CUSTOMER SERVICE TELEPHONE AUSTRALIA 1300 657 888 Please read this manual before installation and operation ENGLISH gt gt Safety WARNING To reduce the risk of fire or electric shock do not expose this appliance to rain or moisture The apparatus shall not be exposed to dripping or splashing and no objects filled with liquids such as vases shall be placed on the apparatus CAUTION RISK OF ELECTRIC SHOCK DO NOT The lightning flash with arrowhead symbol within an equilateral triangle is intended to alert the user to the presence of uninsulated dangerous voltage within the product s enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons The exclamation point within an equilateral triangle is intended to alert the user to the presence of important operating and maintenance servicing instructions in the literature accompanying the appliance CAUTION To reduce the risk of fire and electrical shock do not remove the cover of this unit Please refer all servicing difficulties to qualified technicians Use of controls or adjustments or performance of procedures other than those specified may result in hazardous radiation expo
13. SB jack can also record any file of which to DVD R RW DVD R RW disc 7 TV signal RF input default 200 TV channels 8 Professional recorder driver can record the content on HDD to DVD R RW disc rapidly record one hour s content within 60 seconds without affecting the picture quality make recoding convenient and fast 9 Built in large capacity HDD support maximum 160GB HDD can record TV program DV signal and AUX in signal into HDD to save and play at any time 10 6 recording modes maximum 6 hours disc recording of high quality 4 7GB DVD R RW disc up to 223 hours HDD recording 11 Intelligent timer recording miss no wonderful program 12 Recording of DVD Video quality can keep the high video quality of the original program 13 Various disc editing and management 14 Support modification of TV channel information including frequency and audio mode 15 Disc lock function prevent from deleting or recording by mistake 16 Disc compatibility processing make recorded DVD R RW disc to be played in other DVD players easily 17 Built in Multi digital Audio Decoder e g Dolby Digital HDCD MPEG4 PCM 18 Support Divx Divx Pro Xvid MPEG1 MPEG2 MP3 JPEG decoder 19 Support multi disc format e g DVD DVD R RW SVCD VCD CD CD R RW Picture CD 20 Built in large storage HDD support copying between sources of HDD DVD USB support super long recording high speed accessing and rewriting 21 Adopt MPEG II digital real time coding
14. at Weekend Note system can set 8 timers at the same time The scheduled time Date 06 01 07 shall not exceed 1 month Dan 17 55 45 R di End 17 56 45 Recording source ue Through this function you can select desired input source of recording Wes Note If there s no signal output from the source at the scheduled time the system won t record Record to choose to record the contents from input source to Press SELECT to cancel the timer HDD or disc recording setting Quality select the quality of the recorded Video Mode select the repeat modes of recording Once record only once Every day record in the scheduled time everyday automatically Every week record in the scheduled time every week automatically Mon Fri record in the scheduled time from Monday to Friday automatically Mon Sat record in the scheduled time from Monday to Saturday automatically Weekend record in the scheduled time on weekend automatically Date It s available when the recording mode is set to Once only Begin It s to set the beginning time of timer recording End It s to set the end time of timer recording Note when setting more than one timers the scheduled time shall not be overlapped Title Display the title name of recorded items Title name can be changed through this function PDC ON Inserted advertisements won t be recorded OFF Inserted advertisements will be recorded Note This function
15. ays when cleaning the unit Safety NOTES for CATV erector This page which lists correct grounding method and detailed instructions is to remind CATV erector of NEC 820 40 parts Cables should be connected to grounding system of the building If the unit is connected to the antenna outdoor or cable system the outdoor antenna must be grounded to prevent statical disturbance by thunder National Electronic Code 810 part US National Standardisation Organisation National Fireproofing Association NO 70 1984 Canada Electronical Code part 1 paragraph 54 this part contains correct grounding method of antenna and building grounding method of lead in and antenna discharger and how to connect grounding electrode and The request for electrode Do not put the external part of electrical wire near the high voltage wire When installing antenna system be careful that do not touch or near the high voltage wire or circuit They might cause mortal harm Installing antenna is very dangerous and should be finished by professionals Direction 1 2 3 Unplug the unit from the wall outlet before cleaning or polishing it Do not use liquid cleaners or aerosol cleaners Use a cloth lightly dampened with water for cleaning the exterior of the unit Never let any liquid spattered on the unit It might cause electric shock or fire hazard Please disconnect the unit under these conditions lightning rainstorm unused for a long time Maintain 1
16. c Picture The disc is dirty or damaged Clean the disc or try another disc noise distorted Reset the colour system of the player or the TV set Try to direct the player to the TV set instead of via other components such as a VCR Picture not full Select the screen format from the player s SYSTEM MENU screen see SYSTEM MENU of this manual Select the screen format from DVD disc menu 25 Specifications Type of Disc Playback DIVX XVID DVD VCD SVCD CD CD MP3 DVD RW DVD R DVD RW DVD R CD RW CDR KODAK PICTURE CD Type of disc recording DVD RW DVD R DVD RW DVD R Signal noise ration gt 90dB Dynamic Range 1kHz gt 80dB Crosstalk 1kHz gt 80dB Distortion noise 1kHz lt 65dB RF TV out x 1 Output Terminals HDMI x 1 VGA x 1 S video x 1 Component Video YCbCr amp YPbPr x 1 Composite video amp audio 1 5 1 channel output x 1 Digital Audio Coaxial output x 1 Digital Audio Optical output 1 Antenna in x 1 S video x 1 Front Composite video amp audio x 1 Rear Composite video amp audio x1 DV input i Link IEE1394 USB input i Link Input Terminals Power input AC 100 240V 50 60Hz Dimension Body size W430 x D327 x H48 mm Main unit only Net weight 4 5Kg 26 PALSONIC CORPORATION PTY LTD 1 JOYNTON AVENUE WATERLOO NSW 2017 AUSTRALIA TEL 02 9313 7111 FAX 02 9313 7555 www palsonic com au PALSONIC CUSTOMER SERVICE TELEPHONE AUSTRALIA 1300 65
17. c 2 After loading the contents of disc the PBC menu will show on the screen 3 Choose the content desired to play by number keys 4 Press DVD key to turn ON OFF PBC function 5 Press RETURN key back to PBC menu playback What is PBC There are controllable signals in VCD and SVCD The disc holds PBC signal would show its information on the TV screen as menu which makes it easy to choose the contents Play MP3 disc MPEG1 AUDIO LAYER 3 file is a kind of high compressed audio file This technique can compress the data to 1 10 size That is to say compress 10 audio discs into one CD ROM disc 1 Put in MP3 disc the unit will read the data of the disc and show it on the screen 2 Choose the desired track by director or number key press ENTER to confirm How to program the playback Choose the wanted tracks by director cursor and press ADD CLEAR to take them into the playing list After programming press direction key Right to enter program playback list then press direction key Up Down to select desired track press ENTER key to enter program playback Play CD disc DIGITAL AUDIO C D 1 Load the disc 2 The unit will recognise the disc type and automatically play disc information Play Picture CD Picture CD COMPATIBLE The unit can play Kodak Picture CD disc or JPEG file 1 Load the Kodak picture CD and it will play automatically Press STOP key to e
18. d this function can also prevent from deleting the contents already recorded by mistake Record a new title Overwrite disc Lock disc Edit title EN 1 Mark picture Normally the first recorded picture is regarded as title picture m through this function you can make any picture in the title to be ulus Tile 01701 title picture In disc playback mode for the position of d U N PLAY the picture that can be title picture press PAUSE key and Chapter marker press EDIT key to select Mark picture press ENTER key Hide Chapter to confirm and press EDIT key again to save the setup and Ires ae Split title return to disc menu playback Time 0 15 36 2 Split title Through this function you can divide a title into several independent titles of different length In disc menu playback select title that needs split press ENTER key to play at the point you want to divide press EDIT key to select Split title and press ENTER key to confirm press EDIT key again to save the setup and exit rae ee 3 Chapter mark Through this function you can divide a chapter into several ones or combine several chapters into one A disc can contain maximum 124 chapters and maximum 99 titles If the chapters exceed the limit system will warn too many chapters and existing mark will be deleted before new mark added In disc playback mode at the point you want to divide press EDIT key
19. e content by different viewing angles Note It is available only when the disc holds this kind of information OPEN CLOSE Open or close the tray door Time shift you can only turn ON OFF time shift function in AUX in or TV TUNER mode AUDIO TO switch language or audio When playing disc with multi languages or multi audio press AUDIO to switch the languages or audio to play SUBTITLE TO switch the displaying subtitle When playing disc with multi subtitle press SUBTITLE key to switch among different displaying subtitles Note the function needs disc support 0 9 Number keys When playing disc you can select track to play by number keys directly In TV mode you can select channels by number keys e g To select the 8th track press number key 0 and 8 then press ENTER key to confirm To select track after 10th e g The 18th track press number key 1 and 8 then press ENTER Note when playing VCD or SVCD you can only select by number keys in PCB OFF mode SETUP System setup key Enter system setup mode SOURCE To select source of input signal Press SOURCE key you can switch the mode among Tuner TV Channel F COMP front AV R Svideo back S video and YCbCr component video DVD In HDD or AUX in playback mode press DVD button for 2 seconds to switch to DVD play mode When playing DVD disc press DVD back to DVD disc menu playback When playing S VCD disc press DVD button to turn on or
20. e video signal with copyright protection General recording TV Tuner v 1 Press to turn on the unit AV input on front 2 Turn on the TV select correct input source then signal from the 4 unit will display on the TV screen see es Lap TOSS 3 Press 4 place a recordable disc Y 4 Press close the disc tray 5 Press SOURCE to select recording sources are listed as below 6 If TV program is selected press CHANNEL or number keys to select the program you need to record DV input 7 After selected recording source press RECORD to start recording 8 To avoid recording advertisement or other useless content you can press Pll to pause recording after advertisement press RECORD again to resume recording 9 Press g to stop recording NOTE A few seconds is necessary to update the disc after stop NOTE When recording signal from DV The buttons gt on remote can control the DV Play Recorded Program Press pil to play recorded program NOTICE When recording source is set in DV after stop recording you must press SOURCE to switch to DVD playback mode to play the recorded program Watch other TV program while recording Press AV TV on TV remote to switch the TV into TV mode NOTE If you do not want to watch TV while recording you can turn off the TV Please be careful that if you are using topbox make sure it s in WORK status After pressing RECORD
21. eo tape no signal shows when playing in DVD recorder Why Check if cable is fastened securely If the input video signal is very weak or do not match correlative standards it will not be recognised by the recorder Can PAL and NTSC signal be recorded on one DVD R RW disk NO As DVD standard the unit does not allow to record both PAL and NTSC signal on one disk Disk Content Management Can new caption be added on DVD R disk Yes If only the disk has not been closed you can add new caption on it Close Disk After closing disk the recorded DVD R disk can play on normal DVD player 24 Troubleshooting Should your DVD recorder develop a problem please check below before requesting service Symptom Check and Action No Power Check if the power cord has been properly connected to the power oullet Check if the main power has been switched on Does not play No disc load a disc Disc has been loaded upside down Place the disc with the label side up Disc s region code does not match to the player Disc is not correct type for the player Disc is damaged or dirty clean the disc or try another disc There may be moisture condensation inside the player Remove the disc and leave the unit power on for one or two hours No Picture Check if the TV set has power on use TV remote to select A V signal for DVD rather than broadcast Check if the system connection is secure Check if the connection cables are damaged Clean the dis
22. h this function you can cover title you don t need and record new contents in it s original place In the PBC menu of disc with recorded contents select desired title by direction key then select Overwrite press ENTER key to enter recording preparing mode select source to record from select RECORD key to record new contents Overwrite disc When the unit reads and shows the disc menu of the disc with recorded contents select Overwrite disc press ENTER to enter recording preparing mode select the source to record from press RECORD to record new contents Add It can continue to record from the end of the last title but not record another title Select the last title then press ADD press ENTER key to enter recording waiting mode press SOURCE Channel or number keys to select satisfactory input source press ENTER to record until the disc is full or recording is stopped Note The beginning of added recording is the end of the last title Rename title Erase title Overwrite title Append title Setup timing record Timer sawp menr Through timer recording setup menu you can record the contents Source Front CVBS Rear S VIDEO YUV you want in scheduled time This function is usually used to record Recordio TV TIMER key io enter timer T iin ium mien Quality HQ SP SP LP EP SLP pr ogr am press o enter ti le 9 se up e u Mode Once Daily Weekly Mon Fri Mon S
23. ime Setting Program Day dd mm yyyy 06 01 2006 Time hh mm System Language Select the language you use to operate the unit Audio Language This option is available when the disk supports such audio sounds and menu language If the disk has no optional audio language this option will not work Subtitle Language This option is available when the disk supports such subtitles sounds and menu language If the disk has no optional audio language this option will not work Disc Menu Language This option is available when the disk supports such subtitles sounds and menu language If the disk has no optional audio language this option will not work Set up date time Manual you can set the time and date as the exact time of your local place by hand Auto The earth is divided into 24 time zone each places may be in different time zone and TV station obey the local time TV station You can only enter it when date time is set to auto which means that time of the unit is according to time of the current watched TV station Date You can change year month and day in the option Time You can change time in the option Parental Level 4 PG13 5 6PG R 7 Nc17 8 ADULT Change Password Factory Defaults Screen saver SCARTOutput YCbCr RGB Time shift buffer Preserve Hard disk info CNotice wa Enter password here mimi Input new password L LILILI Input new agai
24. mplifier e Unplug the unit from the wall outlet before cleaning or polishing it Do not use liquid or aerosol cleaners Use a cloth lightly dampened with water for cleaning the exterior of the unit Never place heavy object on the unit Safety Important Safety Instructions Read these instructions Keep these instructions Heed all warning Follow all instructions Do not use this apparatus near water Clean only with dry cloth Do not block any ventilation openings Install in accordance with the manufacturer s instructions Do not install near any heat sources such as radiators heat registers stoves or other apparatus including amplifiers that produce heat Do not defeat the safety purpose of the polarised or grounding type plug A polarised plug has two blades with one wider than the other A grounding type plug has two blades and a third grounding prong The wide blade or the third prong are provided for your safety If the provided plug does not fit into your outlet consult an electrician for replacement of the obsolete outlet Protect the power cord from being walked on or pinched particularly at plugs convenience receptacles and the point where they exit from the apparatus Only use attachments accessories specified by the manufacturer Use only with the cart stand tripod bracket or table specified by the manufacturer or sold with the apparatus When a cart is used use with caution whe
25. n according to frequency search for TV channel according to it s exact frequency 4 Band Select Standard if use wireless antenna to search for TV channels Select Wired cable if use wired TV to search for TV channels 5 Fine Tuning This option can only be set while watching TV When watching TV enter into Fine Tuning page in TV Setup Because there might be some inaccuracy of the antenna you can set the best frequency in the option Adjust the frequency through 4 gt then select Confirm 6 Del delete the current TV channel PAL TV Display 4 3 LB 4 3 PS 16 9 WS Video Output Progressive TV Type TVs in different countries or areas are in different systems please check the TV system in your country or area before set this option When set in AUTO the unit will set the TV system on the basis of the system of TV channels or disk played input source is TV tuner TV Display 4 3LB when the unit is connected to normal TV set wide screen picture will display on the TV screen but a part will be cut automatically 4 3PS when the unit is connected to normal TV set while playing wide screen films there will be a black area in top and bottom 16 9WS choose this option when the unit is connected with a wide screen IV set Video output format If you select progressive output the interlace video has no output including CVBS S Video YCbCr If you select interlace output the progressive video ha
26. n gagad Factory Defaults System will reset all setup items to the default values OK to confirm Cancel to exit HDD Size 151504MB Used space 48736MB Remain space 102768MB Title Number 14 Space Manage Automatically Manuall Empty hard disk All video programs the hard disk drive will be lost Do you want to continue Cancel Parental Control When play disks with age control you can decide the disks that can be played on the unit through age control Change Password When entering the option the TV screen will show as below sid Password Enter password here JOGO The default password is 8806 Input the new password and press ENTER to confirm User Default Reset to all the setup status Screen saver After the unit remains in STOP or NO Disk status for a few minutes the screen saver will show a floating picture to protect the TV kinescope if the screen saver is on Component input Select YCbCr and there will be signal output in YUV terminal when Video format output is set to interval YUV It s YCbCr output when set to progressive YUV It s YPbPr output select RGB when the Video format output is set to progressive there will be video output to VGA terminal Time shift buffer mode Refresh means the recorded contents will be erased if you switch input source or TV channel after T Shift function is ON Preserve mean
27. n moving the cart apparatus combination to avoid injury from tip over Unplug this apparatus during lightning storms or when unused for long periods of time Refer all servicing to qualified service personnel Servicing is required when the apparatus has been damaged in any way such as power supply cord or plug is damaged liquid has been spilled or objects have fallen into the apparatus the apparatus has been exposed to rain or moisture does not operate normally or has been dropped Read through this instruction manual before installation and use To disconnect the power cord hold the plug instead of pulling the cord Switch off the main power when the unit is not in use Disconnect the power plug from the power outlet when you do not intend to use the unit for a prolonged period of time Before moving the unit remove the disc from the unit s tray first Do not open the cover or touch any of the components inside the unit Do not operate or install the unit under direct sunlight or near objects that radiate heat This may lead to overheating of the unit Do not operate or install the unit in moist or humid conditions This may affect the pick up of the unit Install the unit on a flat surface with good air circulation Please ensure the ventilation holes are not covered otherwise the unit will overheat and malfunction Wipe the panel and case with soft dry cloth only Do not apply any kind of thinner alcohol or spr
28. na In Aerial cable Notes To TV Set _ 1 This is a suggested connections for your reference only The actual connection should be base on your own needs and your TV and equipment system Remote STANDBY T Shift NUMBER KEY DVD ADD CLEAR RETURN STOP VOLUME RECORD REVERSE REPEAT A B FUNC VIDEO OUTPUT MODE ZOOM g 40 U gt lt d AUDIO SUBTITLE 0000 0O DVD DV USB Ce RETURN ADD CLEAR EDIT TIMER o STOP PAUSE PLAY J 00009 0 600001 PREV NEXT F REV F FWD CHANNEL ee REPEAT REVERSE SLOW SORT J A B FUNC GOTO 0 J UM VIDEO ZOOM T DVD R RW DISPLAY SUBTITLE AUDIO SETUP SOURCE DV USB HDD DUB ENTER EDIT TIMER PAUSE PLAY PREV NEXT F FWD F REV CHANNEL SLOW SORT GOTO PIP Remote DISPLAY T Shift J AUDIO d SUBTITLE 0000 o o e DVD DV USB HDD DUB RETURN O ADD CLEAR EDIT TIMER O STANDBY Stand by enter or exit stand by state DISPLAY When playing disc press DISPLAY key to display the information of the recorder s current state on TV screen ANGLE If DVD contains segments viewed from different angles you can enjoy different viewing angel content Playing multi angle segment DVD disc press ANGLE to enjoy th
29. nter picture browse playback In normal picture playback press direction key to rotate the picture press F FWD key the picture will ZOOM by 12 25 50 100 200 400 normal In normal picture playback press ANGLE key to change the circularly way in which the picture displays on the TV screen 2 Load the JPEG file the system will display file list of the disc on the TV screen after reading the disc type QD Select the file you want to play by direction key UP DOWN n normal picture playback press direction key to rotate the picture press F FWD key the picture will ZOOM by 12 25 50 10096 20096 400 normal In normal picture playback press ANGLE key to change the display way in which the picture displays on the TV screen Play DIVX disc DIVX XVID refer to the latest video compressed standard which can recover a very low bit rate digital stream into high quality video this kind of format can compress the information of a DVD disc into a normal CD disc the supported MPEG4 subtitle is SRT srt and SAMI smi How to make DIVX file File Manager AUDIO W 0 00 00 0 00 00 1 Computer equipment can surf on the internet BAD hold enough hard disc space hold disc recorder BAD SRT Operation system should be TURN 2 Search for suitable DIVX file from the website TURN SMI download and save it to the hard disc 3 Put in recordable disc after downloading record the d
30. nu as below TV Video Timer Recording File Manager GOTO To search when playing disc press GOTO key to select track or any time point to play VIDEO To switch Video output In open mode press VIDEO key to switch the Video output mode among YCbCr YPbPr etc ZOOM To zoom out When playing S VCD DVD disc press ZOOM key to zoom out the playing pictures by 1 5 times or 2 times PIP This key is to turn on off PIP function When playing DVD or video in HDD PIP can display a window on the right upper corner of the TV screen in which you can watch the TV program or input signal Note When playing MP4 MP3 VCD CD this function is unavailable 9 When playing CD S VCD DVD MP3 disc press DISPLAY key twice until the TV screen display the menu of relative disc information then move cursor to MODE press direction key Right move cursor to Random and press ENTER key to enter random mode When playing CD S VCD DVD MP3 disc press DISPLAY key twice until TV screen display the menu of relative disc information move Mode press direction key Right then move cursor to Program and press ENTER key to enter disc program mode TV screen will display as follows program Play List TRACK H v move cursor to the track need to program press ADD CLEAR key to pick up the track to program column and rearrange the orders of them After programming the tracks move cursor to the track in program
31. ower ON OFF Coaxial output AUDIO output S Video input Antenna Output AUDIO input YCbCr input S Video output 5 1 channels surround audio Connecting to TV lt o Aerial cable Essential connection for TV program record cable Antenna Homi VGA OUTPUT Component cable Green Blue Red Audio cable white amp red Video cable yellow S Video cable Yellow video amp Je NE E l Co cem White L Green Red en Red E RE utt em TE _ Aerial cable essential connection VGA Cabe j 0 1 m Ex TV set Connections amp O are necessary for TV and recorder to receive TV signal Unlike conventional VCR machine the recorder will not output its own signal via the aerial cable So it s normal that you cannot view the recorder signal from any of the separate TV channels Connecting either one of 20 0 0 O Oor Q is Notes necessary for the TV to receive recorder signal 1 Connect the player s down mix audio left L and right R output to the TV s audio left and right inputs Connect either one of the player s video output Video S Video or component to the TV s corresponding video input If the TV set is equipped with component video input connecting this signal will provide the best picture quality 2 lf the TV has VGA input connect the VGA port of the recorder to
32. ownload DIVX file into the disc Load in DIVX disc the unit would read the disc information and show it on the TV screen refer to picture Choose the wanted tracks by the director key Up Down or number key press ENTER to play When playing AV files press DISPLAY key to display disc file list move cursor to according subtitle files press ENTER key to select the display subtitle Chapter 4 Menu setup Auto Chapter Mark Record Duality This operation will modify saved channels continue Program Number Name Standard PAL B G PAL D K PALI SECAM L SECAM B G SECAM D K Channel Cable Channel Fine Tuning Del Search Type Program Table Timer Setting Menu Press ENTER to review a scheduled gt recording create a new one Press Function for other options Channel list Move cursor to the channel need to be reordered then press direction key Right to pick it out from the list then move it to the position you want and press direction key Left to insert it there At last move the cursor to Confirm and press ENTER Country Setting Refers to choosing national channel mode Because different country use different channel mode before searching please fixed the channel mode to the related country Note country set will lead to abnormal sound or picture and even failure in channel search Auto Chap Mark When the option is set in 5 min the unit will mark one chapter e
33. pper right of the HDD menu Through this setup you can change the index picture when the playing title goes to the picture that needs change press ENTER key to make it 6 Rename the system gives each title a title name through this setup user can change the name to a familiar one Move cursor to Rename press ENTER key and rename menu composed of letters and figures etc will display on TV screen move cursor to desired letter or figure by direction key press ENTER to make it Lock is to lock selected title means when you want to play the title you have to input code when you need other operation e g delete divide etc Note super code 8806 Protect is to prevent the selected title from being deleted Split or segment How to copy the content of USB to the disc When the unit is working plug the USB flash or card reader with memory card into the USB jack in the front panel 2 Press DV USB key to switch the operation mode to USB playback mode 3 Press EDIT key the system will indicate to enter USB to DVD back up mode Move cursor to select the file that needs copy Press ADD CLEAR key and the system will send selected file to selected file list After select the files press RECORD key to start copy Note The disc used to copy must be blank recordable disc or recordable disc recorded with similar files Recordable disc with different type of files can not used to copy How to copy the content of
34. r chapter by the button Press PREV into previous chapter or title press NEXT return to the next chapter or title Note Some discs do not support this operation F REV F FWD YOU can choose fast speed of 2X 4X 16X or 32X to play the disc content 1 When playing press F REV F FWD to adjust the speed 2 When fast playing press PLAY to recover the normal playback Note Some discs do not support this operating _ CHANNEL to switch TV channels in TV playback mode REPEAT Q when playing DVD disc you can switch the playback among chapter repeat title repeat disc repeat and normal playback by repeat key when playing S VCD CD disc you can switch the playback among track repeat disc repeat and normal playback by repeat key REVERSE To play backwards in slow motion This function refers to S VCD DVD disc only SLOW SORT To play forwards in slow motion sort This function refers to SVCD DVD disc only A B segment repeat When playing CD VCD SVCD DVD discs press this key to view random part of the disc repeatealy When playing disc press A B once on the beginning point point A of the part that need to be repeated point A is set Press A B again on the final point of the part Then the part between Point A and B will play repeatedly Press A B key once move current repeated part that has been set will resume normal play FUNC Function key Press the key you can select desired operation mode through me
35. s Chapter 1 General introduction 01 Function introduction Chapter 2 Operation interface 02 10 Front panel Rear panel Connecting to TV Connecting to amplifier Connecting to outer AV equipment Connecting to TV set recorder DVB DVD recorder Remote Chapter 3 Basic playback Chapter 4 Menu setup 13 17 Setup Recording Setup Video Setup Audio Setup Language Setup Date Time Setup Preferences Setup menu Time Shift Chapter 5 Basic recording 18 23 Preparing for recording General recording Disc operating Disc editing Setup timing record Chapter 6 Additional information 24 26 Usual issues Troubleshooting Specifications Chapter 1 General introduction Function Introduction 1 Stereo 2 channel 5 1 channel analog audio output coaxial optical digital output 2 HDMI VGA CVBS S video YCbCr YPbPr output 3 Analogue signal input CVBS L R S Video input 4 Y Cb Cr signal input produce clearer recording Video 5 Intelligent monitor can connect with Digital Variscope shoot and record continuously for 223 hours store real time monitor information apply to home monitor and meeting recording etc 6 USB input can play JPEG file Mp3 music and Mp4 movie in the storage equipment connected to U
36. s no output including HDMI VGA YPbPr In open mode press VIDEO key to switch between progressive video and interlace video Downmix Downmix ON when playing disks with 5 1 channels the left speaker will output sound of left channel and partial sound of centre SPDIF Output and surround channels the right speaker will output sound of right channel and partial sound of centre and surround LPCM Output channels OFF All 5 1 channels have audio output Dynamic Range SPDIF Output RAW when the unit is connected with an amplifier by coaxial or optical please enable this option When playing disk that recorded in Dolby Digital DTS or MPEG Speaker Setup format the unit will send out digital sound code through coaxial or optical output The amplifier must hold Dolby Rear Digital DTS and MPEG decoder PCM when this option is enabled the unit will decode sound code into PCM signal when playing disk in Dolby Centre Distance of DTS and MPEG format and send out through coaxial or 0 3m optical output reat LPCM Output E 48K the sampling frequency of LPCM digital audio output 1 5m is 48KHz Rear Distance 96K the sampling frequency of LPCM digital audio output is 96KHz The amplifier must support 96KHz decoding Note LPCM refers to digital audio format without compression no loss Subwoofer TestTone OK Test Tone Test Control All Circle Dynamic Range Now Testing Front left Speaker Front
37. s not to erase HDD information Show relative information about HDD Space management If you need to record more contents to HDD when it s full Select Manual system will indicate that HDD is full and can t record any more Select Auto system will delete the oldest title to record new contents automatically Erase HDD Erase HDD contents Erase disc Erase disc can only be entered in AUX in operation mode and it s only available to DVD RW and DVD RW disc Chapter 5 Basic recording Preparing for recording This unit can record on DVD R RW DVD R RW discs If you want re record a disc please select DVD RW DVD RW This disc type can be re written for 1000 times ATTENTION The unit is not able to record on DVD RAM CD R or CD RW discs Video signal in PAL system and NTSC system can t be recorded on the same disc Before recording please check for the latent problem that might cause recording failure such as scratch and spot NOTE For some DVD devices the recorded DVD R or DVD R discs can only play after closing When a disc contains too little information some player might not be able to play it Disc Resume Record If the recording is halted by power cut the unit can resume those information that has been recorded 1 Turn on the unit 2 Read the disc 3 The screen will display the window of resume disc data 4 Press ENTER to start resuming disc The unit can t record th
38. sure Where the MAINS plug or an appliance coupler is used as the disconnect device the disconnect device shall remain readily operable CLASS 1 LASER PRODUCT CLASS 1 LASER PRODUCT This marking indicates the presence of laser beams used in this unit and CLASS 1 refers to laser beams of the weaker class There is no danger of hazardous radiation outside this unit Double insulation This is class Il apparatus Please disconnect the unit under these conditions Do not overload wall outlets extension cords or convenience receptacles beyond their capacity since this can result in fire or electric shock Do not use unsuitable outlet it might be dangerous Check the connection regularly If any rupture or failure in insulation call for a maintenance man to replace them ensure reliable operation and to protect it from overheating the unit must be put in somewhere well ventilated Do not use power line operated sets near sources of water for example near a bathtub washbowl kitchen sink or laundry tub in a wet basement or near a swimming pool etc Do not place the unit on an unstable object The set may fall causing serious injury to a child or an adult and serious damage to the unit Never let any liquid spattered on the unit It might cause electric shock or fire hazard Never place the unit near or over such objects for example radiator heat register stove or other heat sources including a
39. to select Chapter mark press ENTER key to confirm select insert chapter title press ENTER key to confirm at last press EDIT key to save Note Those chapters will be saved on the disc in pending format because recordable disc has no compatibility process mode normal DVD player can t read it however the self defined chapter mark during recording can play in normal DVD player after close disc 4 Hide chapter Through this function when the recorded contents is playing you can skip those that you don t want to watch e g commercial advertisements First edit the contents you don t want to watch into an independent chapter by edit function then when playing the chapters after edit select the title that needs to be hidden press EDIT key to select hide chapter press ENTER key to confirm press EDIT again to exit from edit menu and renew disc contents And when playing title contents the chapter hidden won t play Rename title In the disc menu of disc with recorded contents select desired title by direction key then press Rename title press ENTER key to enter name title menu After input the new name move cursor to confirm press ENTER key to complete renaming Erase title Through this function you can delete title you don t need In the disc menu of disc with recorded contents select desired title by direction key select Erase title press ENTER key to erase Overwrite title Throug
40. very 5 minutes automatically while recording when it set in Off the unit will not mark chapter while recording Record Quality s SP Automatic Search Through Automatic Search the unit can save the found channels in order In Automatic Search status press Cancel to cancel the search and the channels received before will be stored NOTE Before Automatic Search please set Country Setup select local TV system first please first check if SECAM is available in the channels of your country or area If it is available you can auto scan directly If not please setup the TV audio system first Modify Channel 1 Channel name Move cursor to the channel press CHANNEL key to select the channel need to name Then move cursor to Channel name press ENTER key to enter edit frame and select desired letters or figures by direction key to compose the channel name 2 TV TVs in different countries or areas are in different systems please check the TV system in your country or area before set this option When set in AUTO the unit will set the TV system on the basis of the system of TV channels or disc played input source is TV tuner 3 Channel scan mode Scan according to channel Search for TV channels according to the TV channels table provided by TV station Each TV channel has a serial number provided by TV station e g C 036 which is sent out together with the TV signals Sca
Download Pdf Manuals
Related Search