Oricom ECO7050 User's Manual
Contents
1. BE O U E Oricom ECO7050 Guide Once you have fully charged your eco7050 Handset follow the instructions below to register this handset for use with your eco70 700 REGISTERING YOUR HANDSET Registration allows communication between your base unit and handset s If your handset is not registered you will not be able to make a call or use some of the functions and features on the phone 1 Charge the batteries for 14 hours 2 Register the handset to the base unit the operation is different in eco70 and eco700 In eco70 we need to set the base unit in registration mode by resetting the base power In eco700 we can set the base in registration mode by pressing and holding the base for 10s During standby mode 1 Press and hold the a gt key for 3 seconds until both the and Yi icons flash then press and hold the amp key for 3 seconds The following will appear on the display a Yin 2 Press 1 and the handset begins to search for the base 3 Enter the base pin code 0000 If the pin is wrong the handset will restart searching for the base 4 When the handset is registered it will show HS followed by the handset number Registration shall be completed within 30 seconds If registration is successful the signal icon f displays steadily If registration failed repeat the above procedure gt NOTE Your base can register up to 5 handsets After registering 5 ha2. ndsets your base unit registration memory is full If you attempt to register an additional handset registration will not be successful FOR ALL OTHER INSTRUCTIONS PLEASE REFER TO YOUR eco70 700 USER GUIDE PROHS Guide indd 1 cS 2009 4 15 mei
Download Pdf Manuals
Related Search