Oreck Blower XL User's Manual
Contents
1. S L I O AMAZING FRANCA GUIDE D UTILISATION PAGE 7 E S P A SIMPLY 1 800 242 1378 1 888 23 ORECK Commercial Hospitality CANADA 1 866 74 ORECK O WWW ORECKCONMMERCIAL COM 72191 02REVB E A A E N G L I S H BEFORE OPERATING CLEANER READ ALL INSTRUCTIONS IN THIS MANUAL CAREFULLY Table of Contents Safeguards Important Safety Instructions page 2 Warranty Accessory Parts List page 3 Operating Assembly Instructions page 4 Maintenance amp Customer Service Troubleshooting Guide page 5 PCCOSSONES soma o unre ora page Fran ais Guide D utilisation page 7 Espa ol Guia Del Usuario page 12 Safeguards WARNING Unplug cord from electrical outlet before servicing e IMPORTANT Make sure filter bag is in place Do not operate cleaner without filter bag Damage to motor may occur Be sure bag gasket is in place If the white bag gasket is damaged or lost replace at once For best results change disposable filter bag regularly even if it is not completely full An extremely dirty bag or a bag close to full will affect the suction of the cleaner and can create excessive motor heat that could damage the motor A good practice is to change filter bag every 30 days even if it is not full Do not pick up moist material or liquids Clean your vacuum cleaner with a damp not wet cloth in the disposable bag cavity and the o2. AUTHORIZED SERVICE CENTER S H ACCESSORIES SOLD SEPARATELY 1 800 242 1378 1 888 23 ORECK 1 866 74 ORECK To order call Commercial Hospitality Canada Replacement Treated Filter Bags 12 pk with 1 Micro Filter Part No PKBB12DW Replacement Micro Filter Part No 72005 01 Replacement White Bag Gasket Oreck Fresh Air Tabs Reusable Cloth Bag Part No 72017 02 Part No AIRTABS Part No 72184 01
3. The flexible hose uses a Shurlok locking system that prevents hose removal unless intended To install hose align J slot in hose coupling with TWIST AND PUSH TO INSTALL TOOLS TWIST AND PULL TO REMOVE TOOLS port Insert hose in port Twist collar clockwise to lock hose coulping in port Twist counterclockwise and pull to remove hose The adjustable extension wand and cleaning tools supplied with your Oreck XL Compact Cannister Vacuum lock together with friction Twist and push to be sure they lock tightly when installing Twist and pull to remove When installing tools directly to blower or suction port without using hose tool adapter must be used Blower Port The blower port is located at the rear of the machine Installation of tools is the same as BLOWER described for suction port Air Exhaust Deflector AIR EXHAUST To deflect exhaust air DEFLECTOR attach air exhaust deflector to blower port using adapter tube Cord Dump Twist cord dump to easily release stored cord Plug cord into electrical outlet Power Switch Push power switch to ON I position Assembly Attach Caddy and Insert Tools Locate caddy clip indents at top rear corners of appliance Place appliance on firm non slip surface or hold in your lap Grasp handle firmly Place end of caddy in outside indent then strongly push and pull other end of caddy into opposite indent Be sure
4. an to replace the obsolete outlet Do not defeat the purpose of the polarized plug E N G L ORECK MANUFACTURING COMPANY ORECK gives you the following limited warranty for this product only if it was originally purchased for use not resale from ORECK or an ORECK Authorized Retail Dealer ORECK will repair or replace free of charge to the original purchaser any rt which is found to be defective in material or workmans ip within one 1 year or the data of purchase Parts subject fo normal wear are not covered by this limited warranty This limited warranty does not apply to any part subjected to accident abuse commercial use alteration misuse damage caused by fire or act of God the use of voltages other than indicated on the serial number plate of this product or service of this product by other than ORECK or an ORECK Factory Authorized Service Center ORECK does not authorize any person or representative to assume or grant any other warranty obligation with the sale of this product ORECK s limited warranty is valid only if you retain proof of purchase from ORECK or an ORECK Authorized Retail Dealer for this product If you purchase this product from any other source your purchase is AS IS which means ORECK grants you no warranty and that you not ORECK assume the entire risk of the quality and performance of this product e the entire cost of any necessary servicing or repairs of any etects ORECK s liab
5. ility for damages to you for any costs whatsoever arising out of this statement of limited warranty shall be limited to the amount paid for this product at the time of original purchase and ORECK shall not be liable for any direct indirect consequential or incidental damages arising out of the use or inability to use this product Some states do not allow the exclusion or limitation of incidental or consequential damages so the above limitation or exclusion may not apply to you ALL EXPRESS AND IMPLIED WARRANTIES FOR THIS PRODUCT INCLUDING IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE LIMITED IN DURATION TO THE WARRANTY PERIOD AND NO WARRANTIES WHETHER EXPRESS OR IMPLIED WILL APPLY AFTER THIS PERIOD Some states do not allow limitations on the duration of implied warranties so the above limitation may not apply to you This warranty gives you specific legal rights and you may also have other rights which vary from state to state CALL CUSTOMER SERVICE HOT LINE Commercial 1 800 242 1378 Hospitality 1 888 23 ORECK Canada 1 866 74 ORECK Whenever calling please be sure to have your model and serial number from data plate Servicing of Double Insulated Appliances A double insulated appliance is marked with one or more of the following The words DOUBLE INSULATION or DOUBLE INSULATED or the double insulation symbol E In a double insulated appliance two systems of insu
6. lation are provided instead of grounding No grounding means is provided on a double insulated appliance nor should a means for grounding be added to the appliance Servicing a double insulated appliance requires extreme care and knowledge of the system and should be done only by qualified service personnel Replacement parts for a double insulated appliance must be identical to the parts they replace I S H Accessory Parts List 1 Adjustable shoulder strap 2 Flexible hose 3 Crevice tool 4 Fabric tool 5 Deluxe Bare floor and wall tool 6 Tool adapter tube for fitting tools directly to vacuum when not using hose 7 Adjustable extension wand 8 Dusting brush 9 Paper filter bags 10 On Board Tool Caddy 11 Air Exhaust Deflector To order new parts or accessories call Commercial 1 800 242 1378 Hospitality 1 888 23 ORECK Canada 1 866 74 ORECK EN G L I S H IMPORTANT DO NOT REMOVE the dirt retaining flap attached on the back of the front plate It must be left in place for the unit to operate properly and to ensure cleaning effectiveness Shoulder Strap Clamp one end of shoulder strap to ring located in front of ON OFF switch Clamp opposite end of shoulder strap to ring located on back of unit Adjust length by A gt pulling shoulder strap i through clip a a IMPORTANT Before using shoulder strap pull both ends to be sure it is secure Hose amp Tool Installation
7. rims on caddy openings face up Avoid trapping fingers when caddy snaps on painful pinch could result If caddy needs to be removed a large flathead screwdriver inserted under caddy clip at indent can be used to carefully pry caddy loose E N G L Assembly Pull cord through center opening in caddy and push until it is seated at back of slot at rear of center opening in caddy Insert crevice tool brush and fabric tool into caddy in spaces provided Maintenance CHANGING THE FILTER BAG A Use only genuine ORECK XL filter bags Stand unit on its back Holding strap away from door twist knob counterclockwise to release and lift out front plate B C Remove used bag and insert fresh bag The cardboard rim fits smoothly into the recessed top Replace the front plate and close unit clockwise un IS H Maintenance THE WHITE BAG GASKET GLUED IN THE HOUSING MUST BE IN PLACE OR UNIT WILL NOT OPERATE PROPERLY REPLACE IF NEEDED REPLACING MICRO FILTER Stand unit on its back Twist knob and lift out front plate Micro Filter Remove disposable bag Remove old filter from bottom inside unit Replace with new filter A replacement filter is supplied in each package of 12 ORECK XL filter bags or you may order filters separately Maintenance and Customer Service Your ORECK COMPACT CANISTER VACUUM is a product of recise engineering The motor bearings are permanently lubrica
8. ted and should not be oiled If you require additional information or have problems with your ORECK appliance you may call ORECK customer service Commercial 1 800 242 1378 Hospitality 1 888 23 ORECK Canada 1 866 74 ORECK Please ia the model number and serial code number which can be found on the data plate on the back of the vacuum Save your sales or purchase slip Should your ORECK appliance require warranty service in the U S A present this slip to the Authorized Service Center as your proof of purchase date or in Canada call customer service Problem _ Cleaner Will Not Run Vacuum Will Not Pick Up Or Has Low Suction Tools Wands Will Not Stay Together Possible Source Not plugged in properly No electricity in wall outlet Motor protector tripped Needs service Filter bag is full Hose wand tool is clogged Air leak due to missing or damaged gasket Proper friction fit not being obtained E N G L I Troubleshooting Guide Be sure cleaner is firmly plugged into wall outlet Check electrical source fuse or circuit breaker See Motor Protection System page 2 Take to service center or call for nearest service center Replace filter bag See To Replace Filter Bag page 5 Remove obstructions Replace gasket See page 5 Push and turn ALL OTHER SERVICING SHOULD BE DONE BY AN ORECK
9. turn it to a service center or call customer service Commercial 1 800 242 1378 Hospitality 1 888 23 ORECK Canada 1 866 74 ORECK Do not pull or carry by cord use cord as a handle close door on cord or pull cord around sharp edges or corners Do not run appliance over cord Keep cord away from heated surfaces Do not unplug by pulling on cord To unplug grasp the plug not the cord Do not handle plug or appliance with wet hands Do not put any object into ppan s Do not use with any opening blocked keep tree of dust lint hair and anything else that may reduce air flow Keep hair loose clothing fingers and all parts of body away from openings and moving parts Do not use to pick up anything that is burning or smoking such as cigarettes matches or hot ashes Do not use without filter bag assembly in place Turn off all controls before unplugging Use extra care when cleaning on stairs Do not use to pick up flammable or combustible liquids such as gasoline or use in areas where they may be present SAVE THESE INSTRUCTIONS For Commercial Use Polarized Plug Notice This product is equipped with a polarized alternating current line plug a plug having one blade wider than the other This plug will fit into the power outlet only one way This is a safety feature If you are unable to insert the plug fully into the outlet try reversing the plug If the plug should still fail to fit contact an electrici
10. utside of canister unit IMPORTANT DO NOT REMOVE the dirt retaining flap attached on the back of the front plate It must be left in place for the unit to operate properly and to ensure cleaning effectiveness MOTOR PROTECTION SYSTEM If fine materials such as soot cement plaster dust copy machine powder etc are picked up the bag surface may seal and cause the motor to shut off to avoid over heating If this happens turn the switch off and unplug the cleaner Replace filter bag Check and clear any clogs in hose or accessories After approximately 30 min the motor will have cooled and the cleaner will be ready to use Note The cleaner must remain unplugged for 30 minutes for motor to cool and system to reset including the following IMPORTANT SAFETY INSTRUCTIONS When using an electrical appliance basic recautions should always be followed READ ALL INSTRUCTIONS BEFORE A USING THIS VACUUM CLEANER WARNING To reduce the risk of fire electric shock or injury e Do not leave appliance unattended when plugger in Unplug from outlet when not in use and before servicing Do not use outdoors or on wet surfaces Do not allow to be used as a toy Close attention is necessary when used by or near children Use only as described in this manual Do not use with damaged cord or plug If appliance is not working as it should has been dropped damaged lef outdoors or dropped into water re
Download Pdf Manuals
Related Search