Onkyo M-5010 Owner's Manual
Contents
1. TRIGGER selector Set this TRIGGER switch before turning on the M 5010 To turn on the M 5010 with the signal input from the 12V TRIGGER IN jack set the TRIGGER switch to 12V TRIGGER To turn on the M 5010 with the signal input from the INPUT jack set the TRIGGER switch to AUDIO Auto Power On Function If you do not use Auto Power On Function set the TRIGGER switch to OFF AUTO STANDBY selector Enables or disables the Auto standby function SPEAKER IMPEDANCE selector Switches the speaker impedance to 4 Q or 8 Q POWER CORD Connections Cable and Jacks Analog audio RCA L ma a g White Analog audio connections RCA carry analog audio E R Red L Push plugs in all the way to make good connections loose connections can cause noise or malfunctions To prevent interference keep audio cables away from power cords and speaker cables Connecting the AV Receiver When connecting the M 5010 to AV Receiver connect the INPUT jacks of the M 5010 to the PRE OUT jacks ofthe AV Receiver and connect the front speakers to the SPEAKERS terminals of the M 5010 AV Receiver N A FRONT PRE OUT jacks To AC wall outlet iG Right Left speaker speaker Connecting Your Speakers Ka Pay close attention to speaker wiring polarity In other words connect positive terminals only to positive terminals and negativ2. 270 Q OUTPUT Frequency Response 10 Hz 100 kHz 0 dB 3 dB INPUT Signal to Noise Ratio 110 dB INPUT IHF A Speaker Impedance 49 160 Power Supply AC 120 V 60 Hz Power Consumption 160 W No sound Power Consumption 45 W Stand by Power Consumption 0 5 W Dimensions W x H x D 435 mm x 139 mm x 311 mm 17 1 8 x 5 1 2 x 12 1 4 Weight 8 0 kg 17 6 Ibs Specifications and features are subject to change without notice En 11 ONKYO Onkyo Corporation 2 1 Nisshin cho Neyagawa shi OSAKA 572 8540 JAPAN Tel 072 831 8023 Fax 072 831 8163 http www onkyo com Onkyo U S A Corporation 18 Park Way Upper Saddle River N J 07458 U S A Tel 800 229 1687 201 785 2600 Fax 201 785 2650 http www us onkyo com Onkyo Europe Electronics GmbH Liegnitzerstrasse 6 82194 Groebenzell GERMANY Tel 49 8142 4401 0 Fax 49 8142 4208 213 http www eu onkyo com Onkyo Europe Electronics GmbH UK Branch Unit 19 Building 6 Croxley Green Business Park Hatters Lane Watford WD18 8YH UK Tel 44 0 1628 473 350 Fax 44 0 1628 401 700 Onkyo China Limited Unit 1033 10 F Star House No 3 Salisbury Road Tsim Sha Tsui Kowloon Hong Kong Tel 852 2429 3118 Fax 852 2428 9039 http www onkyochina com Onkyo China PRC 1301 555 Tower No 555 West NanJin Road Jin an Shanghai China 200041 Tel 86 21 52131366 Fax 86 21 52130396 http www cn onkyo com SN 29401276 C Copyright 2012 Onkyo Corporation
3. Canadian Models NOTE THIS CLASS B DIGITAL APPARATUS COMPLIES WITH CANADIAN ICES 003 For models having a power cord with a polarized plug CAUTION TO PREVENT ELECTRIC SHOCK MATCH WIDE BLADE OF PLUG TO WIDE SLOT FULLY INSERT Modele pour les Canadien REMARQUE CET APPAREIL NUMERIQUE DE LA CLASSE B EST CONFORME A LA NORME NMB 003 DU CANADA Sur les mod les dont la fiche est polaris e ATTENTION POUR EVITER LES CHOCS ELECTRIQUES INTRODUIRE LA LAME LA PLUS LARGE DE LA FICHE DANS LA BORNE CORRESPONDANTE DE LA PRISE ET POUSSER JUSQU AU FOND Features Contents M 5010 Power Amplifier 75 W ch 1kHz 8 ohms 0 08 THD 2ch Driven FTC e WRAT Wide Range Amplifier Technology e High Current Low Impedance Drive e 10 000 uF Capacitor x 2 e Three Stage Inverted Darlington Circuitry e Copper Bus Plate for Low Impedance Drive e 1 16 16mm Full flat Chassis e Aluminum Front Panels e 12V Trigger in out e Impedance Switch 4 8 ohms and 8 16 ohms e Auto Power on Function by Receiving Audio Signal e Auto Standby Function e OUTPUT RCA Through Out Installing the Power Amplifier Ensure proper ventilation Approx 20 cm a Approx 8 in 20 cm A _ Approx 4 in f 10 cm s Approx 8 in 20 cm Install the power amplifier on a sturdy rack or shelf Position it so that its weight is evenly dispersed on its four legs Do not install the power amplifier in a place with vibratio
4. is a problem plug the power amplifier into a different branch circuit 1 Connect all of your speakers and components 2 Plug the power cord into an AC wall outlet Custom Setup Setting the TRIGGER Make TRIGGER selector settings if you want to turn the power on and off along with other equipment TRIGGER selector 7 Switch the TRIGGER selector on the unit s rear panel gt 12V TRIGGER The M 5010 will be turned on when the 12V TRIGGER jacks are provided with power gt AUDIO The M 5010 will be turned on when the INPUT jacks are provided with an audio signal Note The power will not be turned off automatically if the TRIGGER selector is set to AUDIO Use the Auto Standby function if you want to turn off the power automatically gt OFF default Set the TRIGGER selector to OFF if you want to turn the M 5010 on or off independently from other equipment Setting the Auto Standby Function When the Auto Standby ASb function is activated the power amplifier will automatically enter Standby mode if there is no operation for 3 hours with no audio signal input AUTO STANDBY OFF ON o AUTO STANDBY selector 7 Switch the AUTO STANDBY selector on the unit s rear panel gt ON Enables auto standby gt OFF default Disables auto standby Setting the Speaker Impedance You can set the impedance of the speakers that you connect to the unit SPEAKER IMPEDANCE so 30 a SPEAK
5. is normal e If you do not use this unit for a long time it may not work properly the next time you turn it on so be sure to use it occasionally For U S models FCC Information for User CAUTION The user changes or modifications not expressly approved by the party responsible for compliance could void the user s authority to operate the equipment NOTE This equipment has been tested and found to comply with the limits for a Class B digital device pursuant to Part 15 of the FCC Rules These limits are designed to provide reasonable protection against harmful interference in a residential installation This equipment generates uses and can radiate radio frequency energy and if not installed and used in accordance with the instructions may cause harmful interference to radio communications However there is no guarantee that interference will not occur in a particular installation If this equipment does cause harmful interference to radio or television reception which can be determined by turning the equipment off and on the user is encouraged to try to correct the interference by one or more of the following measures e Reorient or relocate the receiving antenna e Increase the separation between the equipment and receiver e Connect the equipment into an outlet on a circuit different from that to which the receiver is connected e Consult the dealer or an experienced radio TV technician for help For
6. when the main power of M 5010 is turned on Rear Panel inpur SS 12V TRIGGER INPUT LEVEL knob Turn this INPUT LEVEL knob to adjust the input level of the signal from the INPUT jacks Normally set to MAX INPUT OUTPUT jacks These are the analog audio inputs and outputs Use an RCA type audio connection cable to connect the output jacks of the device to the INPUT jacks on the M 5010 When connecting a control amplifier or preamplifier connect the PRE OUT jacks to the INPUT jacks If you connect the OUTPUT jacks of the M 5010 to the INPUT jacks of another M 5010 the signal input at the INPUT jacks of the M 5010 is also output from the OUTPUT jacks Input Output Link Function 12V TRIGGER IN OUT jacks Connect the 12V TRIGGER IN jack to an AV Receiver that has a 12V TRIGGER output jack This jack works on between 5 to 12 volts DC If you want another component to be activated deactivated by turning on off the AV receiver connected to the 12V TRIGGER IN jack of the M 5010 connect the 12V TRIGGER input jack of that component to the 12V TRIGGER OUT jack of the M 5010 In this state the 12V TRIGGER is output when the M 5010 is turned on Devices can be connected in series using these jacks Use 1 8 inch 3 5mm monaural type mini jack connectors or the supplied stereo mini plug cable The tip polarity of the connector is positive AUTO zus amp SPEAKERS terminals Connect Speakers
7. ER IMPEDANCE selector 1 Switch the SPEAKER IMPEDANCE selector on the unit s rear panel gt 4 or more and less than 8 Q Sets the impedance to 4 Q gt 8 Q or more and 16 Q or less Sets the impedance to 8 Q default Settings will not be enabled even when the selector is changed in the Standby mode To change a setting be sure to turn on the unit prior to making any changes En 10 Operations Troubleshooting To listen to music or view your favorite movies follow the operations below The procedures given below assume that the other system components are already connected For example that the source components are already connected to the control amplifier or the preamplifier 1 Lower the volume at the control amplifier or preamplifier Lower the volume of the control amplifier or preamplifier to the minimum so that when the M 5010 is turned on you do not hear loud unwanted sounds 2 Turn on the M 5010 and select the input on the control amplifier or preamplifier Select the proper input on the control amplifier or preamplifier 3 Slowly increase the volume of the control amplifier or preamplifier Now all that remains is to control the control amplifier or preamplifier and the other connected system components to enjoy your music or movies The Standby On indicator does not light when the ON STANDBY button is pressed e Bad connections or wiring Check if the power cord is properly connected
8. If the indicator still does not light turn off the M 5010 disconnect the power cord and contact the dealer from whom you purchased this unit The Power indicator lights blue but no sound comes from the speaker or the volume is very low e Bad connections or wiring Check connections speaker cables etc The INPUT LEVEL control is set to MIN gt Turn the INPUT LEVEL control to adjust the input level e The settings on the control amplifier or preamplifier are wrong Check the settings on the control amplifier or preamplifier The left and right sounds are unbalanced or reversed e Bad connections or wiring Check connections RCA type audio connection cable etc e The polarity of the speaker cable is wrong Check the polarity of the speaker cable The TRIGGER switch does not react Check that the TRIGGER switch is effective Turn on the power supply once Specifications Rated Output Power FTC 75 watts minimum continuous power per channel 8 ohm loads 2 channels driven at 1 kHz with a maximum total harmonic distortion of 0 08 FTC 65 watts minimum continuous power per channel 4 ohm loads 2 channels driven at 1 kHz with a maximum total harmonic distortion of 0 08 THD N Total Harmonic Distortion N 0 08 Rated Output Power Damping Factor 60 Front 1 kHz 8 Q Input Sensitivity and Impedance Unbalance 870 mV 20 kQ INPUT Rated RCA Output Level and Impedance 0 87 V
9. Japan All rights reserved C1210 1 29401276
10. ONKYO Contents Power Amplifier roduc M 5010 La Advanced Operations Instruction Manual Gig eee eee Thank you for purchasing an Onkyo Power Amplifier Please read this manual thoroughly before making connections and plugging in the unit Following the instructions in this manual will enable you to obtain optimum performance and listening enjoyment from your new Power Amplifier Please retain this manual for future reference WARNING TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK DO NOT EXPOSE THIS APPARATUS TO RAIN OR MOISTURE CAUTION TO REDUCE THE RISK OF ELECTRIC SHOCK DO NOT REMOVE COVER OR BACK NO USER SERVICEABLE PARTS INSIDE REFER SERVICING TO QUALIFIED SERVICE PERSONNEL WARNING AVIS RISK OF ELECTRIC SHOCK ff RISQUE DE CHOC ELECTRIQUE DO NOT OPEN NE PAS OUVRIR N The lightning flash with arrowhead symbol within an equilateral triangle is intended to alert the user to the presence of uninsulated dangerous voltage within the product s enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons The exclamation point within an equilateral triangle is intended to alert the user to the presence of important operating and maintenance servicing instructions in the literature accompanying the appliance Important Safety Instructions SA YR Oy 10 11 12 13 14 Read these instructions Keep these instructio
11. d or objects have fallen into the apparatus the apparatus has been exposed to rain or moisture does not operate normally or has been dropped PORTABLE CART WARNING S3125A 15 16 17 18 Damage Requiring Service Unplug the apparatus from the wall outlet and refer servicing to qualified service personnel under the following conditions A When the power supply cord or plug is damaged B If liquid has been spilled or objects have fallen into the apparatus C Ifthe apparatus has been exposed to rain or water D Ifthe apparatus does not operate normally by following the operating instructions Adjust only those controls that are covered by the operating instructions as an improper adjustment of other controls may result in damage and will often require extensive work by a qualified technician to restore the apparatus to its normal operation E Ifthe apparatus has been dropped or damaged in any way and F When the apparatus exhibits a distinct change in performance this indicates a need for service Object and Liquid Entry Never push objects of any kind into the apparatus through openings as they may touch dangerous voltage points or short out parts that could result in a fire or electric shock The apparatus shall not be exposed to dripping or splashing and no objects filled with liquids such as vases shall be placed on the apparatus Don t put candles or other burning objects on top of this uni
12. e terminals only to negative terminals If you get them the wrong way around the sound will be out of phase and will feel unnatural Be careful not to short the positive and negative wires Doing so may damage the power amplifier e Make sure the metal core of the wire does not have contact with the power amplifier s rear panel Doing so may damage the power amplifier E Screw type speaker terminals Strip 1 2 to 5 8 12 to 15 mm of insulation from the ends of the speaker cables and twist the bare wires tightly Don t connect more than one speaker wire to a single speaker as shown terminal Doing so could damage the power amplifier or cause it 1 2 to 5 8 12 to 15 mm to malfunction Z gt E E Banana Plugs If you are using banana plugs tighten the speaker terminal before inserting the banana plug e Do not insert the speaker code directly into the center hole of the speaker terminal Connecting the Power Cord Tip e To reduce noise do not tie signal cables together with the power cable Wire them so that they are away from each other Depending on the country the power amplifier may be polarity sensitive In this case plug the power cord in a way that provides the best sound quality Turning on the power amplifier may cause a momentary power surge that might interfere with other electrical equipment on the same circuit If this
13. n or an unstable location The power amplifier is designed to have high conversion efficiency however its temperature will become much higher than other audio equipment Therefore make sure not to hamper heat dissipation by ensuring proper ventilation Introduction Important Safety Instructions ueneersnnnnnnnnnnnnnnnnnnnnnnnnnnn 2 Precautions Features uuesnnsaneennnnnnnnennnnnnnn pi Installing the Power Amplifier 4 Getting to Know the Power Amplifier cssseese 5 Front Panel Rear Panel Connections Connections in sccessiecceccdes ceedece ccecedssecescesteceeceseece coos scestussaceiess Cable and Jacks Connecting the AV Receiver Connecting Your Speakers see Connecting the Power Cord sssecceseeeeeeseeneeeneeneeees Advanced Operations Custom Setup Setting the TRIGGER Setting the Auto Standby Function Setting the Speaker Impedance nnrseesserneennrnennen ooo00 0 Others Oper tionsS 2 2 2 2250250244020000020d0002000kudnsngnngnnznenneri 10 Troubleshooting 10 Specifications 4 245 4 022 400H teten 11 Getting to Know the Power Amplifier Front Panel POWER AMPLIFIER M 5010 For detailed information see the pages in parentheses OON STANDBY button Power indicator This button is used to turn the main power on off The power indicator will be lit blue
14. ns Heed all warnings Follow all instructions Do not use this apparatus near water Clean only with dry cloth Do not block any ventilation openings Install in accordance with the manufacturer s instructions Do not install near any heat sources such as radiators heat registers stoves or other apparatus including amplifiers that produce heat Do not defeat the safety purpose of the polarized or grounding type plug A polarized plug has two blades with one wider than the other A grounding type plug has two blades and a third grounding prong The wide blade or the third prong are provided for your safety If the provided plug does not fit into your outlet consult an electrician for replacement of the obsolete outlet Protect the power cord from being walked on or pinched particularly at plugs convenience receptacles and the point where they exit from the apparatus Only use attachments accessories specified by the manufacturer Use only with the cart stand tripod bracket or table specified by the manufacturer or sold with the apparatus When a cart is used use caution when moving the cart apparatus combination to avoid injury from tip over Unplug this apparatus during lightning storms or when unused for long periods of time Refer all servicing to qualified service personnel Servicing is required when the apparatus has been damaged in any way such as power supply cord or plug is damaged liquid has been spille
15. t Batteries Always consider the environmental issues and follow local regulations when disposing of batteries If you install the apparatus in a built in installation such as a bookcase or rack ensure that there is adequate ventilation Leave 20 cm 8 of free space at the top and sides and 10 cm 4 at the rear When a shelf is located above the unit the rear edge of the shelf shall be set 10 cm 4 away from the backboard to improve ventilation Precautions 1 Recording Copyright Unless it s for personal use only recording copyrighted material is illegal without the permission of the copyright holder 2 AC Fuse The AC fuse inside the unit is not user serviceable If you cannot turn on the unit contact your Onkyo dealer 3 Care Occasionally you should dust the unit all over with a soft cloth For stubborn stains use a soft cloth dampened with a weak solution of mild detergent and water Dry the unit immediately afterwards with a clean cloth Don t use abrasive cloths thinners alcohol or other chemical solvents because they may damage the finish or remove the panel lettering 4 Power WARNING BEFORE PLUGGING IN THE UNIT FOR THE FIRST TIME READ THE FOLLOWING SECTION CAREFULLY AC outlet voltages vary from country to country Make sure that the voltage in your area meets the voltage requirements printed on the unit s rear panel e g AC 230 V 50 Hz or AC 120 V 60 Hz The power cord pl
16. ug is used to disconnect this unit from the AC power source Make sure that the plug is readily operable easily accessible at all times For models with POWER button or with both POWER and ON STANDBY buttons Pressing the POWER button to select OFF mode does not fully disconnect from the mains If you do not intend to use the unit for an extended period remove the power cord from the AC outlet For models with OON STANDBY button only Pressing the OON STANDBY button to select Standby mode does not fully disconnect from the mains If you do not intend to use the unit for an extended period remove the power cord from the AC outlet 5 Preventing Hearing Loss Caution Excessive sound pressure from earphones and headphones can cause hearing loss 6 Batteries and Heat Exposure Warning Batteries battery pack or batteries installed shall not be exposed to excessive heat as sunshine fire or the like 7 Never Touch this Unit with Wet Hands Never handle this unit or its power cord while your hands are wet or damp If water or any other liquid gets inside this unit have it checked by your Onkyo dealer 8 Handling Notes e If you need to transport this unit use the original packaging to pack it how it was when you originally bought it e Do not leave rubber or plastic items on this unit for a long time because they may leave marks on the case This unit s top and rear panels may get warm after prolonged use This
Download Pdf Manuals
Related Search