Home

One Stop Gardens Digital Weather Station 68354 User's Manual

1. Digital Weather Station 68354 Digital Weather Station AWARNING Read this material before using this product Failure to do so can result in serious injury SAVE THIS MANUAL When unpacking make sure that the product is intact and undamaged If any parts are missing or broken please call 1 800 444 3353 as soon as possible Visit our website at http www harborfreight com Copyright 2011 by Harbor Freight Tools All rights reserved No portion of this manual or any artwork contained herein may be reproduced in any shape or form without the express written consent of Harbor Freight Tools Diagrams within this manual may not be drawn proportionally Due to continuing improvements actual product may differ slightly from the product described herein Tools required for assembly and service may not be included and caution are factors which cannot be built into Specifications this product but must be supplied by the operator 4 AAA Not included SAVE TH ESE BANENE 2 for Station 2 for Transmitter INSTRU CTIONS Wall and Stand Mounting i Display and Key Functions Note This equipment has been tested and found to comply with the limits for a Class B digital device pursuant to part 15 of the FCC Rules Power Date Save This Manual Indicator Keep this manual for the safety warnings and precautions DATE MONTH DAY S assembly operating inspection maintenance and 7 Day Moon Phase cle
2. snooze function will last for five minutes and can be repeated for five times 2 Press ALM to deactivate the snooze function Outdoor Temp Alarm Settings 1 Press ALERT once The temperature alert will turn on or off and the direction arrows will appear or disappear 2 Press ALERT again for two seconds The max indoor temp and the up arrow will flash Press CH to select the channel you need to set When entering the outdoor temp alarm setting the max outdoor temp and the up arrow will flash Use the UP DOWN keys to set the max temperature alert When finished press ALERT to confirm setting Follow the same steps to set the minimum temperature alert setting Press ALERT again to exit NOTE If you do not press ALERT or another key for 8 seconds while in this mode the system will exit back to the standard time mode If you wish to readjust the max or min temperature alert press the UP or DOWN key The setting will begin to flash allowing for readjustment Note the following a The indoor temperature range is 14 to 158 F 10 to 70 C b The outdoor temperature range is 40 to 158 F 40 to 70 C c For the temperature alert setting the lowest alarm temperature should be 1 less from the highest temperature d The humidity detecting range is 20 95 However if the temperature goes below 40 F the display will show LL Should the humidity go below 20 the display wi
3. aning procedures Write the product s serial number in the back of the manual near the assembly diagram or month and year of purchase if product has no number Keep this manual and the receipt in a safe and dry place for future reference Alarm Important Safety Information a In this manual on the labeling and all other information provided with this product Indoor Temp This is the safety alert symbol Itis Trend Indoor used to alert you to potential personal Temp injury hazards Obey all safety Current messages that follow this symbol to Weather avoid possible injury or death Indoor Indoor Humidity Comfort General Safety Warnings neicator Outdoor WARNING Read all safety warnings and Temp instructions Failure to follow the warnings and Trend instructions may result in serious injury pees all sea and instructions Channel or future reference Indicator G tdo r Outdoor Outdoor 1 Position batteries in proper polarity and do not Temperature Reception Humidity install batteries of different types or polarity Icon 2 Properly dispose of all used batteries up Hapi Nae change 3 This product is not a toy Keep Weather Station DOWN Adjust data in any set mode dT itt tof h of chil ane Dalene ee eye ae MODE Press for 3 seconds to enter setting mode 4 Inspect before use do not use if parts are damaged MAX MIN Switch between temp and humidity 5 Use as intended only ALM Enter alarm setting Turn on off alarm 6 T
4. ansmitter signal Keep out of direct rain and direct sun to prevent inaccurate readings Air conditioning or indoor heat can effect the signal leading to incorrect readings Page 3 Operating Instructions Read the ENTIRE IMPORTANT SAFETY A INFORMATION section at the beginning of this manual including all text under subheadings therein before set up or use of this product Time Date and Language Setting 1 After turning on Weather Station press and hold the MODE key for three seconds The Station will beep and the setting to be changed will flash 2 Press UP DOWN key to adjust the year setting Press MODE to confirm setting 3 The order of setting is year month day language hour minute then exit NOTE The seven options for languages are German English Italian French Dutch Spanish and Danish 4 Once the date is set the Week will automatically be set 5 Press and hold the UP key for three seconds to change the Year and Day of Week display 6 Ifyou are in the process of setting but do not operate the device for 8 seconds the display will return to normal mode Alarm Setting 1 Press the ALM key for three seconds A beep will be heard Then press UP DOWN to adjust the alarm s time setting 2 Press ALM again to confirm the setting The alarm bell icon will appear disappear when the alarm turns on off Snooze 1 While the alarm is on press the SNZ key to activate snooze function The
5. he warnings precautions and instructions discussed ALERT Set temp alert Turn on off temp alert in this instruction manual cannot cover all possible Switch between Transmitter channels conditions and situations that may occur It must be understood by the operator that common sense SNZ ACV aie sane nea an lant SKU 68354 For technical questions please call 1 800 444 3353 Page 2 Setup Instructions Read the ENTIRE IMPORTANT SAFETY INFORMATION section at the beginning of this manual including all text under subheadings therein before set up or use of this product Installing Batteries 1 2 3 10 NOTE Install the Weather Station s batteries first Open the Weather station s battery compartment cover Install two AAA batteries making sure to follow polarity marked on the inside of the compartment Close battery compartment cover NOTE Once batteries are in place the LCD will light up briefly and a short beep will sound Then the indoor temperature and humidity will automatically display If the indoor temperature is not displayed after a few seconds remove the batteries and wait for at least 10 seconds before reinserting them Within three minutes of activating the Weather Station insert the Transmitter s batteries Open the Transmitter s battery compartment cover Install two AAA batteries making sure to follow polarity marked on the inside of the compartment Close battery c
6. ht arrow will show c If the temperature has decreased an arrow that curves down will show 4 Ifthe device does not receive a signal from 4 the outdoor transmitter within a hour s time the display will show Once it receives a signal it will renew the outdoor display 5 The indoor humidity are summarized by the Comfort Indicator a If the humidity is lower than 40 too dry then a comfortable icon non smiling face will appear on the display b If the humidity is more than 70 too humid then an uncomfortable icon frowning face will appear on the display c If the temperature is between 20 28 C and the 5 humidity is between 40 to 70 then it will show a very comfortable icon smiling face d If the temperature is outside 20 28 C and the humidity is between 40 to 70 nothing will be shown 6 The weather forecasts have four display icons Sunny sun display Slightly Cloudy sun cloud display Cloudy clouds only display and Rainy clouds with rain display 8 NOTE The outdoor waterproof Transmitter checks the current temperature and humidity and every 60 seconds sends the information to the main Weather Station receiver NOTE The Transmitter s working temperature is between 4 F to 158 F 20 C to 70 C If the Transmitter s temperature becomes either lower or higher than these ranges the Transmitter will stop working NOTE The Trans
7. ll show LL If the humidity is higher than 95 it will show HH e When the temperature alarm beeps in the current channel the temperature and alarm signs will flash When set in another channel only the alarm symbol will flash f When the outdoor temperature alarm beeps the temperature and alarm symbols will flash simultaneously g Once the alert sounds press any key to stop the alert The press ALERT to turn off the alert The alert symbol will disappear from display h If the temperature alert and alarm go off at the same time turn off the alarm first Then deactivate the temperature alert i The temperature alert will beep every second and last for five seconds Then it will stop for about a minute 55 seconds It sound again until pressing any key or until the temperature goes up Once the temperature goes up the beeping will stop automatically SKU 68354 For technical questions please call 1 800 444 3353 Page 4 Thermometer and Hygrometer Transmitter Setup 1 Once the device is turned on the display will 1 show the current temperature and humidity 2 Press DOWN to change the temperature unit 3 The device will check the temperature every 2 hour and compare it to the previous hour The results are shown in the temp trend box There is one for indoors and one for outdoors a If the temperature has increased an arrow that curves up will show b If there is no change in temperature a straig
8. mitter s humidity range is between 20 to 95 If the humidity is lower than 20 the display will continue to show 20 If the humidity is higher than 95 it will continue to show 95 in the LCD display See below for the Transmitter s display icons Transmit Current Channel a oye a Sali bS Battery Power oa Indicator Humidity To mount the Transmitter attach the Transmitter s holder to a wall or place it on a table NOTE Do not mount Transmitter where it will come into contact with a piece of metal or a highly polished surface Doing so can decrease the transmitting range Use the double sided tape not included to mount the holder to a smooth surface that does not allow for screw mounting The holder can also be mounted to the wall using screws NOTE Verify mounting location is free of any hidden wires Once this is done follow these steps a Use a pen to mark the location of the mounting holes on the wall b Drill mounting holes in the points marked on the wall c Screw Transmitter holder into wall and then slide Transmitter into holder SKU 68354 For technical questions please call 1 800 444 3353 Page 5 Maintenance and Servicing Cleaning Maintenance and Lubrication Procedures not specifically explained 1 BEFORE EACH USE inspect the general condition in this manual must be performed of the tool Check for loose hardware misalignment only by a qualified technician or binding of m
9. ompartment cover NOTE When battery power is low the battery icon will appear on the Weather Station Transmitter s LCD display Testing Weather Station Transmitter Connection 1 SKU 68354 After inserting batteries into Transmitter the Weather Station will start receiving readings from the Transmitter The outdoor temperature should be displayed If this does not happen within 15 minutes the batteries will need to be removed from both units and reset following the above instructions NOTE The Weather Station can take up to 3 remote transmitters Follow the above steps for each extra Transmitter making sure to leave 10 seconds in between the reception of the last Transmitter and the set up of the next Transmitter The Weather Station will number the Transmitters in the order of set up the first Transmitter will have the temperature displayed with the number 1 against it and so on When all Transmitters are set up a testing period will follow during which the display switches between all received Transmitters at random Press any key to stop this process The display will show the temperature for the first Transmitter The process also stops automatically if no keys are pressed for a few minutes Once the remote temperature has been received and displayed on the Weather Station the time code reception is automatically started This will take about 7 minutes in good weather conditions NOTE This 7 minute
10. oving parts cracked or broken parts damaged electrical wiring and any other Checking Reception condition that may affect its safe operation 1 If the temperature data is not sent three minutes 2 AFTER USE wipe external surfaces with clean cloth after setup please check the following Do not immerse in water a The Weather Station and Transmitter are at least 1 5 to 2 yards away from any sources of interference such as computer monitors or TV sets 3 Do not use cleaning agents to clean the plastic parts of the tool Use only a mild detergent or a damp cloth b The Transmitter has not been placed on or close to a metal window frame c Electrical products such as headphones or speakers should not be operating on the same signal 433 MHz as the Weather Station And 2 Make sure that your neighbors are not using any electrical devices operating on a similar frequency SKU 68354 For technical questions please call 1 800 444 3353 Page 6 3491 Mission Oaks Blvd PO Box 6009 Camarillo CA 93011 800 444 3353 SKU 68354 For technical questions please call 1 800 444 3353 Page 7
11. time period is an excellent opportunity to install the Transmitter s in suitable location s outdoors To ensure sufficient 433 MHz transmission do not install Transmitter s more than 100 meters from where the Weather Station will be positioned If after 10 minutes the time code has not been received use the MODE key to manually enter a time initially The clock will automatically attempt each hour to receive the time When this is successful the received time will override the manually set time The date is also updated with the received time If the Weather Station cannot receive the time code signal perhaps because of weather disturbances or transmitting distance the time can be manually set The clock will then work as a normal clock Channel Settings 1 For technical questions please call 1 800 444 3353 Once the batteries are inserted and BEFORE replacing Transmitter battery cover use the Channel Key on the back of the Transmitter to select the channel If there is more than 1 Transmitter please choose a different channel Once all settings have been made close the Transmitter battery compartment cover and use the mounting hole to mount the Transmitter on an outdoor wall or window NOTE The max open distance between the Weather Station and the Transmitter is 328 ft 100 meters Do not install the Transmitter at a distance greater than 328 ft Otherwise the Weather Station will not a receive a proper tr

One Stop Gardens Digital Weather Station 68354 User's Manual

Contents

Download Pdf Manuals

Related Search

Related Contents