Omron Healthcare NE-U17 User's Manual
Contents
1. Used to transmit the ultrasonic Used for inhalation such as for Protects the unit from the dust in air Material PS vibration If it has any damage or tracheal lavage Materials case PP filter PS Packaging unit 5 filters deformation the unit may not be able to nebulise Handle this part carefully Material PP Packaging unit 5 cups YS Nebulisation set Materials filter PP connector PMP Packaging unit 1 filter 1 adapter Packaging unit 1 set Long time nebulisation set Mouthpiece set Inhalation mask L set e 4997216 9 4997217 7 4997212 6 4997205 3 Used for normal nebulisation Used for continuous nebulisation Used for inhalation by being held by Attached with the fixing rubber string Materials medication cup PP To be used in combination with the the mouth Enables the simultaneous inhalation medication cup holder ABS supply medication set 4997206 1 Material EVA by mouth and nose Material SEBS Packaging unit 3 sets medication cup cover PMP packing Materials cover PMP cap silicone silicone Packaging unit 1 set Packaging unit tse 20 22mm ISO compatible He se Packaging unit 5 sets ch E Inhalation mask S set Inhalation hose S 30 cm witha Inhalation hose M 70 cm with a 4997207 0 cuff having the diameter of 20 mm cuff having the diameter of 20 mm Attached with the fixing rubber s2. Do not wash the main unit with water or splash water to the power source do not use the nebuliser while you are in bath or having a shower never submerge the nebuliser in water e Short circuit may occur in the unit or you may suffer electric shock Notes on Safety If the nebulisation parts have already become dirty before using the unit clean them first before use e If the medication remains in the nebulisation unit your physical conditions may change for the worse Wash off the remaining medication in the parts thoroughly with water after cleaning these parts with disinfectant e If you inhale with the remaining disinfectant in the parts your physical conditions may change for the worse Replace the water in the water tank each time you use the unit e A dirty vibrator may cause lower nebulisation rate If the medication is attached to the fan installation axis wipe it off e Overheating may cause the motor to stop Disposal of this product should be carried out in accordance with the national regulations for the disposal of electronic products If you are not going to use the unit for a long time be sure to unplug the power plug from the electric outlet e You may suffer electric shock or the unit may ignite due to electric leakage Be sure to turn off the power and unplug the power plug from the electric outlet when you install or remove the device or take care of the parts e You may suffer electric s
3. Turn the air volume adjustment knob to the far right the position of 10 Supply Push the START STOP Button gt and start inhalation medication set Supply 4997206 1 medication pipe Supply medication Air duct bottle cap Cap Long time nebulisation set 4997217 7 e unit for oxygen humidification If you use the unit for humidification in combination with oxygen therapy connect the equipment to the oxygen supply pipe of the long time nebulisation set optional 4997217 7 Please refer to the illustration on the next page In order to stop the air from the fan on the main unit during the oxygen therapy set the air flow volume adjustment knob to 0 and attach an air duct cap to the air duct of the long time nebulisation set The operating and inhalation methods are the same as those of the normal operation 13 How to Inhale Using Optional Parts Oxygen supply pipe bacterial filter Having passed through a bacterial filter the filtered air can be supplied to the inside of the long time nebulisation set Remove the medication cup cover and assemble the long time nebulisation set with the main unit To assemble use the long time nebulisation set in place of the medication cup cover by following the procedure shown on Page 10 At this time close the air duct with the air duct cap Remove the air duct cover from the main unit Remove the bacterial filter
4. the buzzer sounds and the unit stops operation When the time set by the timer is completed e When the medication cup cover is removed during inhalation When the amount of water in the water tank is far from sufficient When the fan cover is removed In case the buzzer sounds due to an error the error display flashes Push the START STOP Button lt gt then the buzzer will stop In this case check the error display and inspect the unit by referring to Page 19 How to Inhale ishing the treatment When the timer is used The buzzer sound notifies the completion of time set by the timer and the unit stops operation When the operation ends 0 on the display illuminates and the display changes to the initial set time Sample display when the timer is set to 10 minutes In approximately 3 seconds When the timer comes to end TIMER MIN 15 Ts 20 5 25 4 30 P continuous 30 P connus To terminate inhalation while using the timer push the START STOP Button lt gt then the unit stops operation At this time the remaining time is reset and the timer returns to the initial set time To start inhalation again push the START STOP Button lt gt PO WE A O Caution In case the treatment is paused by pressing START STOP button be sure to re enter the remaining time before the treatment is resumed To
5. axis General Advice Do not wipe the main unit with volatile chemicals such as benzine or thinners e Do not damage the surface of the vibrator 16 17 How to Disinfect the Unit How to Disinfect the Unit Disinfection by boiling cannot be done to some parts They may become deformed Parts that can be disinfected by boiling Medication Washer cup cover Inhalation hose M with a cuff 70 cm Air filter case Air duct cover Fan cover S Fan Medication Medication cup Mouthpiece cup holder set Disinfection by disinfectant Different disinfectants have different anti bacterial actions For sterilization and disinfection follow the instruction manual and the notes on each disinfectant The time to immerse the parts in the disinfectant yn a differs with the type of the disinfectant used Typical disinfectants that can be used However 30 to 60 minutes or longer is common e Disinfecting ethanol e Glutaraldehyde Sterihyde 0 5 i i ial and other equivalent products Aner mmerSmg We pals wash Men eue e Sodium hypochlorite Milton 0 1 Purax 0 1 with water and dry promptly Carefully store the and other equivalent products parts so that they are not re infected e Benzalkonium chloride Osvan 0 1 e Chlorhexidine Hibitane 0 5 Maskin 0 5 If a coloured disinfectant solution such as Hibitane ee anh Tego 0 2 and other equi
6. bent hose correctly and drain the pooled medication Refer to Page 12 The nebulisation rate is low The nebulisation power is lowered Is the amount of medication in the medication cup too small Increase the amount of medication to more than 5 ml Is the lower portion of medication cup damaged or deformed Replace the medication cup with a new one Is the amount of medication in the medication cup much Reduce the amount of medication to less than 150 ml Refer to Page 10 Is the value of nebulisation rate adjustment knob or the air volume adjustment knob set too low Turn the knob to the right and adjust the value Refer to Page 11 Is the room temperature and or water temperature too low Operate the unit without medication for about 4 minutes then use the unit Is the medication cup dirty After cleaning the medication cup with the detergent wash off the detergent sufficiently under running water before using the cup Nebulisation is unstable Is the amount of medication exceeding 150 ml Reduce the amount of medication to less than 150 ml Refer to Page 10 Are the air volume and the nebulisation rate set to the maximum level when the amount of medication is 150 ml Adjust the nebulisation rate Refer to Page 11 Trouble Where to Inspect How to Correct P D WATER LEVEL MEDICATION CUP D ER P FAN cover The wa
7. cap of the long time nebulisation set Attach a bacterial filter to the long time nebulisation set Attach a connector to the bacterial filter Attach the inhalation hose to the connector and connect the other end of the hose to the air duct of the fan cover When using the bacterial filter set the air volume adjustment knob to 10 Inhalation hose M 4997209 6 Connector Bacterial filter 4997213 4 Bacterial filter cap Long time nebulisation set 4997217 7 14 15 How to Take Care of the Unit ake Care of the Parts 1 Turn off the power by pushing the ON OFF Button 0 1 and unplug the N power plug from the electric outlet 2 Remove the mouthpiece set or inhalation mask 3 Rotate the medication cup cover fixing lever clockwise 4 Remove the nebulisation unit for disassembling D Discard the remaining medication LEE Discard the cooling water in the water om Re Draining tank by using the draining hose Q hose 4 mu 6 Clean and disinfect the parts e Wipe the inside of the water tank by using alcohol e Clean disinfect and immediately dry the medication cup cover medication cup holder medication cup inhalation hose mouthpiece set For the disinfection method refer to Page 17 When assembling the cleaned disinfected and dried parts do not touch the places where the medication and the nebulised medication pass through directly with yo
8. com e This device fulfils the provisions of the EC directive 93 42 EEC Medical Device Directive and the European Standard EN13544 1 2007 Respiratory therapy equipment Part1 Nebulising systems and their components Symbols oul DS Type B 20 21 Specifications Important information regarding Electro Magnetic Compatibility EMC With the increased number of electronic devices such as PC s and mobile cellular telephones medical devices in use may be susceptible to electromagnetic interference from other devices Electromagnetic interference may result in incorrect operation of the medical device and create a potentially unsafe situation Medical devices should also not interfere with other devices In order to regulate the requirements for EMC Electro Magnetic Compatibility with the aim to prevent unsafe product situations the EN60601 1 2 standard has been implemented This standard defines the levels of immunity to electromagnetic interferences as well as maximum levels of electromagnetic emissions for medical devices This medical device manufactured by OMRON Healthcare conforms to this EN60601 1 2 2007 standard for both immunity and emissions Nevertheless special precautions need to be observed e Do not use mobile cellular telephones and other devices which generate strong electrical or electromagnetic fields near the medical device This may result in incorrect operation of the unit and create a potent
9. the water tank is low the nebulisation rate may drop Recommended temperature is approximately 26 C 78 8 F Replace water in the water tank each time the unit is used When the unit is used for a long time continuously replace water at least every twenty four hours For continuous use or long periods refer to Page 13 How to Prepare the Unit before Inhalation ing medication into the medication 1 Remove the medication cup cover by rotating it counterclockwise Ot 2 2 Fill medication into the medication cup Minimum of 5 ml 3 Assemble the medication cup cover by turning it clockwise then install it to the main unit Be sure to turn the cover securely as far as it goes sembling and attaching the ulisation unit to the main unit 1 Fix the nebulisation unit by rotating the medication cup cover fixing lever counterclockwise 2 Attach the inhalation hose and the mouthpiece set M Hose holder 3 Turn on the Power Button O After all items on the LCD display illuminate check that the ERROR display does not flash If the ERROR display flashes check the place where the error number is indicated by referring to Page 19 D WATER LEVEL MEDICATION CUP COVER FAN COVER P FAN cover All items on Now the preparation the display for inhalation is illuminate completed Note As soon as the Power Button O is
10. turned on the fan to cool the parts inside the main unit will start rotating This is normal 10 11 How to Inhale ting the inhalation time Setting the inhalation time by rotating the timer knob clockwise 1 To set the timer The timer can be adjusted by 1 minute when setting the time up to 15 minutes Please note that the timer has intervals of 1 or 2 minutes between 15 and 30 minute timer settings RS RS 10 Le a 20 ia NS we 5 25 26 min 28 min P Continuous TIMER MIN 2 Continuous nebulisation Turn the timer knob clockwise to the position of continuous The display of Continuous on the timer will turn on and the digital characters will rotate to indicate that the unit is in the continuous operation CONTINUOUS TIMER MIN SK e START STOP Button lt gt The fan will rotate and the unit starts to nebulise POWs A O N When the timer is used The display counts down by 1 minute To change the setting during the operation Turn the timer knob to the desired time The timer is reset and the unit starts to operate Adjust the air volume and the nebulisation rate Adjust the air flow volume and the nebulisation rate with the air volume knob and the nebulisation volume adjustment knob while observing the aerosol coming out from the inhalation hose For inhalation using the accessories such
11. Caution When parts are sterilised in an autoclave make sure these parts do not directly contact the heater S inside the autoclave As the temperature of the heater is very high these parts may be melted or deformed How to store the unit Store the parts after thoroughly drying them When storing the parts be careful for the infection Do not store the unit under direct sunlight where temperature and humidity are high in a dusty place where they can be easily sprayed with water or where vibration or shock can be easily applied 18 19 Troubleshooting Trouble Where to Inspect How to Correct ne pros not Is the power plug securely plugged into the Plug the power plug in the electric outlet es electric outlet correctly Refer to Page 10 The unit does not nebulise Is of ERROR display flashing due to insufficient amount of water in the operating chamber Fill the water up to the specified water level mark in the operating chamber Refer to Page 9 Is the medication cup correctly set to the main unit Set the medication cup correctly Refer to Page 10 Is the fan cover open Close the fan cover correctly Is the fan set Set the fan properly Is the amount of medication in the medication cup too much Reduce the amount of medication to less than 150 ml Refer to Page 10 Is the inhalation hose bent and the medication pooled in the hose Adjust the
12. OMRON OMRON ULTRASONIC NEBULISER Mode ME U 17 Instruction Manual E Thank you very much for purchasing this OMRON Ultrasonic Nebuliser E Be sure to read this instruction manual carefully before using the unit so that you can use it safely and correctly E Please keep this instruction manual always at hand for future reference E This unit is a medical instrument Be sure to use the unit properly according to instructions given by medical professionals Only use medications as prescribed and instructed by your doctor A aa ULTRA ATR Table of Contents Be sure to Read This Section Exemptions from Liabilities 1 Intended Use 2 Notes on Safety 3 About the Product Features of the Product 6 Composition of the Product 7 Description of the LCD Display 7 Names of the Parts 1aaaacccaanaa 8 How to Use the Unit How to Prepare the Unit before Inhalation 005 9 How to Inhale uu 11 How to Inhale using optional parts 13 How to Take Care of the Unit How to Take Care of the Unit 15 How to Disinfect the Unit 17 How to Store the Unit 18 Specifications Troubleshooting ceee 19 Specifications 20 List of Optional Parts 22 IM NE U17 E 01 11 2010 1615886 5E NL Exemptions from Liabilities Please understand that OMRON is not liable for the following Occurr
13. RH 20 C to 60 C 4 F to 140 F 10 to 95 RH 700 to 1060 hPa Inhalation hose M with a cuff 70 cm Mouthpiece set 2 Medication cups Power cord Instruction manual with warranty card Result of cascade impactor measurements for particle size 100 Cumulative Undersize Cumulative particle mass of sodium fluoride under size ividual an 0 1 100 Dp um Independently measured at SolAero Ltd Canada Dr John Dennis according to EN13544 1 2007 Measured by OMRON HEALTHCARE Co Ltd Notes e Subject to technical modification without prior notice e This OMRON product is produced under the strict quality system of OMRON HEALTHCARE Co Ltd Japan e The device may not work if the temperature and voltage conditions are different to those defined in the specifications e Do not use the device where it may be exposed to flammable gas e The Nebulisation rate is measured with saline 0 9 solution at 23 C and can vary with medication and ambient conditions e The distribution of particle size is measured with 2 5 NaF solution and can vary with medication and ambient conditions e Performance may vary with drugs such as suspensions or high viscosity See drug suppliers data sheet for further details e See web site of OMRON HEALTHCARE EUROPE to update technical information URL www omron healthcare
14. as mouthpiece adjust the air volume and the nebulisation rate according to your preferences and the accessories being used The air volume 11 levels and the nebulisation rate 10 levels can be checked by the level display adjacent to each knob The air flow volume adjusts the volume of air sent through the medication cup cover ca AIR FLOW VOLUME e e 0 10 NEBULISATION VOLUME The nebulisation volume adjusts the rate of aerosol released from the medication Cod Co fn OC Depending on the type of the medication nebulised aerosol may not come out constantly Medication with high viscosity and surface tension may have a lower nebulisation rate When the unit starts to operate with the medication volume of 150 ml and the air volume and the nebulisation rate at level 10 it nebulises intermittently In this case adjust the nebulisation rate by the nebulisation rate adjustment knob haling the aerosol lt Example of correct use gt You can use an optional inhalation mask instead of a mouthpiece Wrong examples of use Do not bend the inhalation hose or block the nozzle e The medication will be pooled in the hose and the nebulisation rate may be lowered Do not use the unit if the main unit is higher than your head e The medication may splash onto your face or clothes In the following cases
15. ence of trouble and or damage caused by the maintenance and or repair conducted by other than OMRON or OMRON s authorized dealer Trouble and or damage of OMRON s product caused by the product of other manufacturer not delivered by OMRON Trouble and or damage caused by the maintenance and or repair using the repair part s not authorized by OMRON Trouble and or damage caused as a result of not observing the Notes on Safety or operating method mentioned in this Instruction Manual Deviation from the operating conditions of the unit mentioned in this Instruction Manual including the power source and installation environment Trouble and or damage caused as a result of modifying and or improper repair of the product Trouble and or damage caused by supreme forces such as fire earthquake flood or lightning 1 The contents of this Instruction Manual are subject to change for improvement without prior notice 2 The contents of this Instruction Manual have been prepared with care and attention However if you find any omission or error please inform your local OMRON representative or dealer It is prohibited to copy all or a part of this Instruction Manual without getting OMRON s permission Unless you use this Instruction Manual for your personal corporate purpose you are not allowed to use it without OMRON s permission in accordance with the Copyright Act Medical Purpose Intended User Intended Patien
16. ethylene resin SEBS Styrene elastomer 0 nes me ee eee ep ee ee ss see me ee ces ee mes eee me eee 22 Manufacturer naal OMRON HEALTHCARE Co Ltd 24 Yamanouchi Yamanoshita cho Ukyo ku Kyoto 615 0084 JAPAN EU representative ES OMRON HEALTHCARE EUROPE B V Kruisweg 577 2132 NA Hoofddorp THE NETHERLANDS www omron healthcare com Production facility OMRON MATSUSAKA Co Ltd 1855 370 Kubo cho Matsusaka city Mie prefecture 515 8503 Japan Subsidiary OMRON HEALTHCARE UK LIMITED Opal Drive Fox Milne Milton Keynes MK15 ODG U K OMRON MEDIZINTECHNIK HANDELSGESELLSCHAFT mbH John Deere Str 81a 68163 Mannheim GERMANY www omron medizintechnik de OMRON Sant France SAS 14 rue de Lisbonne 93561 Rosny sous Bois Cedex FRANCE Made in Japan
17. gt illuminates and the digital display indicates this ERROR display When the water level in the water tank is too low or the medication cup cover or the fan cover is not installed the corresponding error location is indicated at the upper left corner of the panel For the error display refer to Page 19 Names of the Parts indicates replaceable supplies Air duct cover Mouthpiece set Fan cover Air filter case oe tea gt Air filter Inhalation hose M Display of air volume Refer to the Description of the LCD Display on Page 7 Air volume adjustment knob Display of nebulisation rate Refer to the Description of the LCD Display on Page 7 Nebulisation rate adjustment knob Electric power Medication socket cup holder Rave Nebulisation unit O D START STOP Button lt gt Power lamp Timer knob Medication cup cover fixing lever Back of the main unit Draining hose holder Overflow Drainin hose g Water tank Fan installation axis Vibrator Hose holder Float Button Detection of the shortage of water How to Prepare the Unit before Inhalation Clean the parts before starting the inhalation Parts that can be disinfected by boiling For the disinfecting method refer to Page 17 Submerge these parts in a container fil
18. hich the possibility of death or severe bodily injury may arise as a result of A Warning p y y injury may A Indicates matters in which bodily injury or material damage may arise as a result of incorrect Caution handling XR J Material damage refers to a wide range of damage involving your house household goods domestic animals and pets Examples of signs The A icon indicates caution including warning and danger The pictured The pictured Matters involving actual caution are indicated by statements icon refers to icon refers to or pictures in or near A caution for caution for flammability electric shock The icon indicates prohibitions what you cannot do The pictured The pictured Matters involving specific prohibitions are indicated by text or Icon refers to icon refers pictures shown in or near prohibition to to general disassemble prohibition The icon indicates something that is compulsory must be The pictured The pictured observed at any time icon refers icon refers to Matters involving specific compulsory actions are indicated by to general unplugging the statements or pictures shown in or near compulsion power plug Only use medications as prescribed and instructed by your doctor e Your physical conditions may change for the worse When you use the unit for the first time after purchasing it or after having not used it for a l
19. hock or injure yourself Do not look into the nebulisation section during nebulisation e A large amount of medication may get into your eyes and cause injury Do not operate the unit when the medication cup is empty e The unit may become overheated or damaged Do not fill the water tank with the liquid other than water tap water or distilled water e The vibrator will deteriorate and may be damaged When parts are sterilised in an autoclave make sure these parts do not directly contact the heater inside the autoclave e As the temperature of the heater is very high these parts may be melted or deformed Do not use the power cord or the power plug if it is damaged or do not plug the power cord into a loose electric outlet e You may suffer electric shock or the unit may be shorted or ignite Do not scratch tear modify forcibly bend pull twist or bundle the power cord Do not place a heavy material on the power cord Keep power cord away from heated or hot surfaces e You may suffer electric shock or the unit may ignite due to short circuit because of deteriorated insulation Do not disassemble repair or modify the unit The unit may malfunction or cause injury Contact your nearest OMRON service representative Do not use a power cord other than the supplied one e The unit may ignite or you may suffer electric shock Be sure to use the power source as specified on the device e The unit may ignite or you
20. ially unsafe situation Recommendation is to keep a minimum distance of 7 m Verify correct operation of the device in case the distance is shorter Further documentation in accordance with EN60601 1 2 2007 is available at OMRON Healthcare Europe at the address mentioned in this instruction manual Documentation is also available at www omron healthcare com Correct Disposal of This Product Waste Electrical amp Electronic Equipment BE This marking shown on the product or its literature indicates that it should not be disposed of with other household wastes at the end of its working life To prevent possible harm to the environment or human health from uncontrolled waste disposal please separate this from other types of wastes and recycle it responsibly to promote the sustainable reuse of material resources Household users should contact either the retailer where they purchased this product or their local government office for details of where and how they can take this item for environmentally safe recycling Business users should contact their supplier and check the terms and conditions of the purchase contract This product should not be mixed with other commercial wastes for disposal This product does not contain any hazardous substances List of Optional Parts Sos mere ee 2 me ee ee e Medication cup Bacterial filter Air filter set Air filter 499721 1 8 4997213 4 4997214 2 4997215 0
21. led with sufficient water and boil for 10 minutes Medication cup cover C Inhalation hose M Washer __4 with a cuff How to remove the washer Place the medication cup cover on its side and insert a small item such as a paper clip into the hole of the cover Pinch and remove the washer gently How to attach the washer Hold the medication cup cover and place the washer securely with your fingertips as illustrated in the figures on the left Make sure the washer is placed flat and not upside down Parts that cannot be disinfected by boiling For the care and disinfection refer to Page 17 Fi N Mouthpie i st y Air duct cover Air filter case A Q is TSS KARST IR COSE Fan cover Ne y Medication cup Fan Be sure to immediately dry the cleaned and disinfected parts then store them in a dry place in order to prevent them from getting contaminated in the future ling the cooling water 1 Remove the nebulisation section by rotating the medication cup cover fixing lever clockwise 2 Fill the cooling water Fill the cooling water up to the water level mark that specifies the water level in the water tank The proper amount is approximately 375 ml If the water level in the water tank is lower than the water level mark a lower water level in water tank error will be displayed If the water temperature in
22. may suffer electric shock Do not share the electric outlet with other electric appliances e The unit may ignite or you may suffer electric shock PEN To unplug the power plug from the electric outlet do not pull the power cord instead hold the power plug with your hand e The power cord may be broken or short circuited and cause fire or you may suffer electric shock Notes on Safety General Advice Do not use the unit for the purpose other than for inhalation Do not use any parts other than the accessories or the optional parts listed on page 22 Do not fill the medication cup with more than 150 ml medication or less than 5 ml e The unit may not nebulise Do not move the unit while medication remains in the unit Do not block the air ventilation holes at the rear side of the nebuliser Place the nebuliser on a plain and stable surface during operation Do not apply strong shocks to or drop the main unit Do not bend the inhalation hose e The medication may be pooled in the hose and the nebulisation rate may be lowered Do not inhale from the inhalation hose if the main unit is higher than your head e The medication may spill onto your face or clothes Be careful not to damage the vibrator when cleaning the water tank of the main unit Do not disinfect the unit by boiling in a microwave oven After cleaning and disinfecting the parts assemble them after they are completely dried Do not wipe the main unit
23. ong time be sure to clean and disinfect it Refer to Pages 15 to 17 e Miscellaneous types of bacteria may propagate and you may get infected Clean and disinfect the medication cup medication cup cover mouthpiece and inhalation hose each time the unit is used e Miscellaneous bacteria may propagate and you may become infected If the unit is going to be used by more than one person prepare a disinfected medication cup medication cup cover mouthpiece and inhalation hose for each person before using it This will prevent cross infection Be sure to immediately dry the cleaned and disinfected parts then store them in a dry place in order to prevent them from getting contaminated in the future In case of any problem with your nebuliser please contact your local OMRON service representative address on inside package Do not use this device in combination with ventilation equipment e The pressure in the ventilation system may reduce significantly When assembling the cleaned disinfected and dried parts do not touch the places where the medication and the nebulised medication pass through directly with your hands to prevent possible infection Do not make any contact with the vibrator while the power plug is plugged into the electric outlet e You may suffer electric shock or injure yourself Do not plug in or pull the power plug from the electric outlet with wet hands e You may suffer electric shock or injure yourself
24. rted into aerosol Vibrator Features of the Product 1 Easy to see large LCD displays air volume nebulisation rate set time remaining time and error location The back light illumination featured in the unit enables checking of the display in the dark The unit can nebulise for 72 hours continuously with the use of the optional long time nebulisation set and the supply medication set time set by the timer is completed With the use of a dial the air volume nebulisation rate and time can be set easily and quickly The unit can handle various inhalation therapies with the use of various optional parts 3 The unit has a notification buzzer The buzzer sounds when an error occurs or the Composition of the Product Inhalation hose M with a cuff 70 cm Mouthpiece set Two medication cups Main unit Power cord E Instruction manual with warranty card As the unit is a Class electroshock protection type be sure to use only the supplied power cord with an earth For the optional parts refer to the List of Optional Parts on Page 22 Description of the LCD Display Display of air volume The air volume is displayed in 11 levels Display of nebulisation rate The nebulisation rate is displayed in 10 levels When the timer is used A timer mark gt illuminates and the buzzer beeps to notify the end time For continuous operation A continuous operation mark
25. ter level in the operating Fill in the water up to the water level flashes chamber has been lowered of the operating chamber flashes The medication cup cover is open ure close the medication cup flashes The fan cover is open Securely close the fan cover mr E1 is displayed stopped The fan inside the main unit has Contact the nearest OMRON dealer If the unit does not operate normally after taking the above mentioned measures do not touch the internal mechanism and consult the store where you purchased the unit or the nearest OMRON dealer Technical data Product name Model Power source Power consumption Fuse Ultrasonic frequency Particle size Nebulisation rate Sound Air volume Amount of cooling water Capacity of medication cup External dimensions Weight of the main unit Protection class Operating condition Operating temperature humidity Storage temperature humidity air pressure Accessories included Specifications Omron Ultrasonic Nebuliser NE U17 NE U17 E 230 VAC 50 Hz Approx 80 VA T2A L250V Approx 1 7 MHz MMAD 4 4 um MMAD Mass Median Aerodynamic Diameter Approx 0 to 3 ml adjustable Less than 45 dB Maximum of 17 l min Approx 375 ml Approx 150 ml min 5 ml Approx 276 W x 243 H x 226 D mm Approx 4 0 kg Class Continuous 5 C to 40 C 41 F to 104 F 30 to 85
26. terminate the inhalation during the continuous operation push the START STOP Button lt gt then the unit stops operation To start the inhalation again push the START STOP Button D then the unit will start continuous operation When the inhalation is finished turn off the power and unplug the power cord from the electric outlet How to Inhale Using Optional Parts unit for a long time By using the optional long time nebulisation set 4997217 7 and the supply medication set 4997206 1 the unit can nebulise continuously for a long time Remove the medication cup cover of the main unit Attach an optional long time nebulisation set in place of the medication cup cover and assemble the unit according to the procedure shown on Page 10 At this time check that the air duct is not blocked by the air duct cap Fill medication into the supply medication bottle Tightly close the supply medication bottle cap At this time check that the washer is correctly set inside the cap Remove the cap of the supply medication pipe of the long time nebulisation set and attach the tube of the supply medication set Hang the supply medication bottle on a proper place higher than the device At this time check that the tube is not bent If the tube is bent the medication cannot be supplied If the tube is too long cut it to a proper length Attach the inhalation hose Set the timer to Continuous
27. tring 4997208 8 4997209 6 Exclusive for the inhalation by mouth White hose guide tube cuff can be White hose guide tube cuff can be A size that can be used by an infant removed and installed removed and installed Inhalation hose L 150 cm with a cuff having the diameter of 20 mm 4997210 0 White hose guide tube cuff can be removed and installed Material SEBS Attach it to the hose by rotating Attach it to the hose by rotating Attach it to the hose by rotating e Packaging unit 3 sets clockwise Cut it to the proper length clockwise Cut it to the proper length clockwise Cut it to the proper length Material SEBS Material SEBS Material SEBS x KZ Packaging unit 1 hose e Packaging unit 1 hose e Packaging unit 1 hose x d 7 sul s Pr k s NGG D X 2 E is Sue Adapter Supply medication set Washer 5 pcs Materials are indicated by 4997218 5 4997206 1 4997285 1 e abbreviations Material PMP Supplies the meditation in order to keep Materials silicone ABS Acrylonitrile butadiene ethylene 3 the medication in the medication cup at r resin Used for connecting 22 mm parts a certain level Used for humidifying or e g bacterial filter inhalation for a long time Material PP EVA Ethylene vinyl acetic acid resin e PMP Polymethyle pentane PP _ Polypropylene resin SY PS Poly
28. ts Environment Durable period Precautions for use Intended Use This product is intended to be used for inhaling medication for respiratory disorders or for humidification in combination with oxygen therapy e Legally certified medical experts such as doctor nurse and therapist or healthcare personnel or patient under the guidance of qualified medical experts e The user should also be capable of understanding general machine operation and the content of instruction manual This product should not be used by patients who are unconscious or are not breathing spontaneously This product is intended for use in a medical facility such as Hospital clinic and doctor s office Durable periods are as follows provided the product is used to nebulise saline 3 times a day for 10 minutes each time at room temperature 23 C Durable period may vary depending on usage environment Main unit 5 years Inhalation hose M with a cuff 70cm 1 year Mouthpiece set 1 year Inhalation mask L 1 year Nebulisation set 1 year Medication cup 6 months Warnings and cautions described in the instruction manual should be observed Notes on Safety E The warning signs and the sample icons shown here are listed for you to use this product safely and correctly as well as to prevent the risk of injury to you and others E The icons and meanings are as follows i Warning sign Contents incorrect handling Indicates matters in w
29. ur hands to prevent possible infection S Do not make any contact to the vibrator while the power plug is plugged into the electric outlet e You may suffer electric shock or injure yourself How to Take Care of the Unit How to Take Care of the Air Filter Replace the air filter when it becomes dirty Remove the nebulisation unit from the main device Remove the fan cover by lifting it up Remove the air filter case from inside the fan cover Remove the air filter from the air filter case to replace with a new one Assemble the above mentioned parts in the reverse order gt Care of the Fan Open the fan cover and remove the fan Clean the fan by washing it with water or detergent If the medication is stuck to the fan installation axis remove the medication Remove the fan cover by lifting it up after removing the nebulisation unit from the main device The dirty fan cover can be washed with water or detergent In order to install the fan position the fan to the fan installation axis securely as far as it goes How to Take Care of the Main Unit Clean the dust on the main unit by wiping it with a lightly squeezed cloth after being moistened with water or alcohol After draining water from the water tank of the main unit through the draining hose wipe off the leftover water with a clean and dry cloth Nebulisation section Fan cover Nebulisation section Fan installation
30. valent products used Some parts may be discoloured with Note These products cannot be used for the air filter repeated use However it does not affect the nebulising properties Be sure to immediately dry the cleaned and disinfected parts then store them in order to prevent them from getting contaminated in the future e Miscellaneous types of bacteria may propagate and you may get infected Do not wash the main unit with water or splash water to the power source e Electric leakage may occur in the unit or you may suffer electric shock How to Disinfect and Store the Unit Sterilization with ethylene oxide gas E O G Observe the Instruction Manual of the sterilizer and consult with the manufacturer of the E O G sterilizer for the details Some of the rubber and plastic parts of the nebuliser may have residual ethylene oxide gas After sterilization consult with the manufacturer of the sterilizer and provide sufficient aeration until the safe level to human beings can be obtained The equipment and the parts to be sterilized by E O G must be sufficiently dried in advance Wash and dry the parts then conduct the E O G sterilization Sterilization by autoclave Refer to the Instruction Manual and the Notes on Handling of the sterilizer Option parts that can be sterilized by autoclave 110 ee a Inhalation mask L Inhalation mask S 4997205 3 4997207 0 L J
31. with volatile chemicals such as benzine or thinners Although this nebuliser fulfils the provisions of the EMC Electromagnetic Compatibility directive the use of it should be avoided in direct vicinity of other electric devices Do not allow unsupervised children or infirm persons to use the unit Maintenance Before using the unit be sure to confirm that the main unit operates normally and safely How to handle faults or accidents If an equipment error E1 occurs immediately take the following measures Also refer to Page 19 1 Power off the unit and unplug the power plug from the electric outlet to make the unit inoperable 2 Write Faulty Do not use on the main unit so that it will not be used 3 Contact the store where you purchased the unit or the nearest OMRON dealer Features of the Product About the principle of FU net nebulisation in the NE U17 The NE U17 transmits the energy of ultrasonic vibration from the vibrator located at the bottom of the water tank into water The ultrasonic vibration is transmitted to the medication in the medication cup through the water in the water tank The ultrasonic vibration emits medication from the medication cup like a fountain and this is dispersed as aerosol Air from the fan carries this nebulised medication out of the medication cup Medication Nebulisation The state in which the medication is conve
Download Pdf Manuals
Related Search