Omron Healthcare HEM-711AC User's Manual
Contents
1. A CAUTION Use only Omron authorized parts and accessories Parts and accessories not approved for use with the device may damage the unit 15 USING THE AC ADAPTER TO CONNECT THE AC ADAPTER D Insert the AC Adapter Plug into the AC Adapter Jack on the back side of the monitor as illustrated Plug the AC Adapter into a 120V AC outlet 60 cycles TO DISCONNECT THE AC ADAPTER D Hold and pull the Housing to remove the AC Adapter from the electrical outlet Do not remove by pulling on the cord 2 Remove the AC Adapter plug from the monitor A WARNING Do not plug or unplug the power cord into the electrical outlet with wet hands A CAUTION Do not overload power outlets Plug the device into the appropriate voltage outlet 16 SETTING THE DATE AND TIME Set the monitor to the current date and time before taking a measurement for the first time If the date and time are not set correctly the measurement values stored in the memory and the average values may not be correct The Blood Pressure Monitor automatically stores up to 60 individual measurement values with the dates and times The monitor can also calculate an average reading based on the three most recent measurements taken within 10 minutes of the last reading NOTES If only two readings are stored in the memory for the 10 minute period the average is based on the two readings f one reading is stored in the memory for the 102. RD HE 28 To Display the Measurement Values 0 000 28 To Delete All Values Stored in the Memory 30 Care and Maintenance Care and Maintenance ioc dd sous deenen EEEE uie EE Ie S 31 Error Indicators and Troubleshooting Tips 0000 33 FCC Statement qos ss emer openPR seen sect tede th cR NE M EN 35 Waranty Ze T M eRe 36 SDeCHICHLODSC sS osse eod pn e REF eke Oke Eque E pep dE 37 INTRODUCTION Thank you for purchasing the Omron HEM 711AC IntelliSense Automatic Blood Pressure Monitor with Arm Cuff Fill in for future reference DATE PURCHASED SERIAL NUMBER Staple your purchase receipt here Your new digital blood pressure monitor uses the oscillometric method of blood pressure measurement This means the monitor detects your blood s movement through your brachial artery and converts the movements into a digital reading The monitor stores measurement results The HEM 711AC comes with the following components Monitor Standard Adult Arm Cuff AC Adapter Storage Case e Warranty Card e Instruction Manual printed in English and Spanish The HEM 711AC IntelliSense Automatic Blood Pressure Monitor is intended for home use SAVE THESE INSTRUCTIONS 3 SAFETY INFORMATION To assure the correct use of the product basic safety measures should always be followed including the warnings and cautions listed in this instruction manu
3. blood pressure and the pulse rate in the memory every time a measurement is completed The monitor automatically stores up to 60 sets of measurement values blood pressure and pulse rate When 60 sets of measurement values are stored the oldest record is deleted to save the most recent values AVERAGING FUNCTION The monitor calculates the average reading based on the three most recent sets of measurement values taken within 10 minutes of the most recent reading NOTE If two sets of measurement values are stored in the memory for the 10 minutes period the average is based on the two sets of measurement value If one set of measurement values is stored this is displayed as the average TO DISPLAY THE MEASUREMENT VALUES 1 Press the MEMORY button The Average Symbol i appears on the display when the average reading is shown 28 USING THE MEMORY FUNCTION 2 Press the MEMORY button to display the most recent set of measurement values on the screen The values are displayed from the most recent to the oldest 4a Alternating display NOTES The date and time are alternately displayed with the measurement values Press the MEMORY button to display the next set of values Press and hold the MEMORY button to display the values faster 3 Press the START STOP button to turn the power off 29 USING THE MEMORY FUNCTION TO DELETE ALL VALUES STORED IN THE MEMORY You cannot partially de
4. certain patients including diabetic patients pregnant women and patients with renal failure The monitor is not intended to be a diagnostic device A WARNING Contact your physician for specific information about your blood pressure Self diagnosis and treatment using measured results may be dangerous Follow the instructions of your physician or licensed healthcare provider American Heart Association Scientific Statement 2004 11 DISPLAY SYMBOLS HEARTBEAT SYMBOL HYPERTENSION INDICATOR 4f TAKING A MEASUREMENT The Heartbeat Symbol flashes on the display during the measurement The Heartbeat Symbol flashes at every heartbeat When the measurement is complete the Heartbeat Symbol flashes on the display with your blood pressure and pulse rate if the reading is above 135 for the Systolic Blood Pressure value and or 85 for the Diastolic Blood Pressure value USING THE MEMORY FUNCTION The Heartbeat Symbol flashes when the blood pressure reading stored in the memory is above 135 for the Systolic Blood Pressure value and or 85 for the Diastolic Blood Pressure value Omron Healthcare recommends you contact your physician if the HEARTBEAT SYMBOL appears on the display with your measurement values 12 BATTERY INSTALLATION Battery Cover Press the W indicator on the battery cover and slide the cover off in the direction of the arrow 2 Install 4 AA size batteries so the positiv
5. minute period this reading is displayed as the average 1 TO START THE SETTING Press and hold the Date Time Setting button to adjust the date and time The year flashes on the display 17 SETTING THE DATE AND TIME 2 SETTING THE YEAR The year can be set between 2006 and 2030 When the display reaches 2030 it will return to 2006 Press the MEMORY button to advance by increments of one year Press the Date Time Setting button to set the current year The month flashes on the display NOTE Press and hold the MEMORY button to advance the date and time values faster 3 SETTING THE MONTH Press the MEMORY button to advance by increments of one month Press the Date Time Setting button to set the current month The day flashes on the display 18 SETTING THE DATE AND TIME 4 SETTING THE DAY Press the MEMORY button to advance by increments of one day Press the Date Time Setting button to set the current day The hour flashes on the display 5 SETTING THE HOUR The time is set using AM or PM Press the MEMORY button to advance by increments of one hour Press the Date Time Setting button to set the current hour The minute flashes on the display 6 SETTING THE MINUTE Press the MEMORY button to advance by increments of one minute Press the Date Time Setting button to set the minute setting 7 TO TURN THE MONITOR OFF Press the START STOP button NOTE The monitor will
6. GHT ARM When taking a measurement using the right arm use this instruction for Step 4 on page 22 Apply the cuff to your right upper arm so the blue arrow and the air tube runs along the inside of your elbow The bottom of the cuff should be approximately 1 2 above your elbow NOTE Be careful not to rest your arm on the air tube This will restrict the flow of air to the cuff 23 TAKING A MEASUREMENT The monitor automatically determines your ideal inflation level In rare circumstances when a higher inflation may be necessary the monitor automatically re inflates the cuff up to 30 mmHg higher than the initial inflation and restarts the measurement A CAUTION Operate the device only as intended Do not use the device for any other purpose 1 Sit on a chair with your feet flat on the floor Place your left arm on a table so the cuff is level with your heart 24 TAKING A MEASUREMENT 2 Press the START STOP button All symbols appear on the display The cuff starts to inflate automatically As the cuff inflates the monitor automatically determines your ideal inflation level This monitor detects the pulse during inflation Do not move your arm and remain still until the entire measurement process is completed ca 4 J ca 2M z RI n ca ico NOTE To stop the inflation or measurement press the START STOP button The monitor will stop inflating start d
7. LEVISION INTERFERENCE for U S A only This product has been tested and found to comply with the limits for a Class B digital device pursuant to part 15 of the FCC rules These limits are designed to provide reasonable protection against harmful interference in a residential installation The product generates uses and can radiate radio frequency energy and if not installed and used in accordance with the instructions may cause harmful interference to radio communications However there is no guarantee that interference will not occur in a particular installation If the product does cause harmful interference to radio or television reception which can be determined by turning the product on and off the user is encouraged to try to correct the interference by one or more of the following measures Reorient or relocate the receiving antenna ncrease the separation between the product and the receiver Connect the product into an outlet on a circuit different from that to which the receiver is connected Consult the dealer or an experienced radio TV technician for help POTENTIAL FOR RADIO TELEVISION INTERFERENCE for Canada only This digital apparatus does not exceed the Class B limits for radio noise emissions from digital apparatus as set out in the interference causing equipment standard entitled Digital Apparatus ICES 003 of the Canadian Department of Communications Cet appareil num rique respecte les limit
8. OMRON QD usi Automatic Blood Pressure Monitor with Arm Cuff Model HEM 711AC ESPA OL ENGLISH TABLE OF CONTENTS Before Using the Monitor IntrOduction esa derete torii UC RE eR Eee a ha e SR ed ans 3 Safety Informations doc eoe sme pps ete RP UE S Ode teo DE etre 4 Operating the Device 22 assiessr lemon Pe EE pete d 4 Risk of Electrical Shock mieocce Drm DEROSe Pre mE PIS PRE EE 5 Care and Maintenance associe eR Ec Re eR ewan Ra 6 Before Taking d Measurement cornises sacemoute nau erok PR dris 7 Operating Instructions Know Your Uit sire res dames tie xp eium r cid bees en 8 Unt Display oo cut stews hier nne xe bee qe beso ite d RE 9 Display Symbols 4i nnde ese et PRU bear Hh iE ieu pis 10 Irregular Heartbeat Symbol s ccs oncanc ses seed ab RAE ERE 10 Movement Error Symbol sises hac vatidacies Rex 10 Average Value Symbol ou eos ese viec pr eoe op etti 10 Heartbeat Symbol Hypertension Indicator sse 12 Battery Installation emen Ode Boxe pex eins ib es idus 13 Using the AC Adapter xsevesbiiweeRRen Muere eda BE Dee eng 15 Setting the Date and Tite s zoo enc sern se been NE PR 17 Applying th Atm Cuff i ueuos esee ese eer ere ee ne em eet en 21 Taking a Measurement orenen i eE nE bie ehe iE litum er euin 24 Special Conditions uasa eR Sed aerea IAE Re er eid 27 Using the Memory E nctloD 2 52 SeecedpRc e Ree riria beer rud 28 Averaging FUNCHON auo sce dencenr ee wha E RES
9. accessories accord ing to applicable local regulations Unlawful disposal may cause environmental pollution A Do not use a cellular phone near the device It may result in an operational failure A Use only Omron authorized parts and accessories Parts and accessories not approved for use with the device may damage the unit A Use only 1 5V manganese or alkaline batteries with this device Do not use other types of batteries This may damage the unit RISK OF ELECTRICAL SHOCK A Do not plug or unplug the power cord into the electrical outlet with wet hands A Do not overload power outlets Plug the device into the appropriate voltage outlet SAFETY INFORMATION CARE AND MAINTENANCE A Do not subject the monitor to strong shocks such as dropping the unit on the floor A Do not submerge the device or any of the components in water A Store the device and the components in a clean safe location A Changes or modification not approved by Omron Healthcare will void the user warranty Do not disassemble or attempt to repair the unit or components BEFORE TAKING A MEASUREMENT To ensure a reliable reading follow these recommendations Avoid eating drinking alcohol smoking exercising and bathing for 30 minutes before taking a measurement Rest for at least 15 minutes before taking the measurement 2 Stress raises blood pressure Avoid taking measurements during stressful times 3 Measurements should be
10. al SAFETY SYMBOLS USED IN THIS INSTRUCTION MANUAL Indicates a potentially hazardous situation A WARNING which if not avoided could result in death or serious injury Indicates a potentially hazardous situation which if not avoided may result in minor or moderate injury to the user or patient or damage to the equipment or other property A CAUTION OPERATING THE DEVICE A Contact your physician for specific information about your blood pressure Self diagnosis and treatment using measured results may be dangerous Follow the instructions of your physician or licensed healthcare provider A If battery fluid gets in your eyes immediately rinse with plenty of clean water Contact a physician immediately A Read all of the information in the instruction manual and any other literature in the box before operating the unit A This device is intended for use in measuring blood pressure and pulse rate in the adult population Do not use this device on infants or persons who cannot express their intentions SAFETY INFORMATION OPERATING THE DEVICE continued A Read the Special Conditions section page 27 of the instruction manual if your systolic pressure is known to be more than 220 mmHg Inflating to a higher pressure than necessary may result in bruising where the cuff is applied A Operate the device only as intended Do not use the device for any other purpose A Dispose of the device components and optional
11. automatically turn off after the minute has been set after battery replacement 19 SETTING THE DATE AND TIME RESETTING THE DATE AND TIME To adjust the date or time after it has been setup when you first use the unit Start with the monitor in the off position 1 Press and hold the Date Time Setting button The year flashes on the display 2 Follow the instruction from step 2 on page 18 NOTE If you need to change the Date and Time always adjust the Date and Time setting before taking the next measurement 20 APPLYING THE ARM CUFF A CAUTION Read all of the information in the instruction manual and any other literature in the box before operating the unit A CAUTION This device is intended for use in measuring blood pressure and pulse rate in the adult population Do not use this device on infants or persons who cannot express their intentions APPLYING THE CUFF ON THE LEFT ARM 1 Make sure the air plug is securely inserted in the main unit 21 APPLYING THE ARM CUFF 3 Apply the cuff to your left upper arm so the blue arrow is centered on the inside of your arm and aligned with your middle finger The air tube runs down the inside of your arm The bottom of the cuff should be approximately 1 2 above your elbow 1 2 inch 1 2 cm Blue Arrow Air Tube 4 Wrap the cuff firmly in place around your arm using the closure strip 22 APPLYING THE ARM CUFF APPLYING THE CUFF ON THE RI
12. e and negative polarities match the polarities of the battery compartment as indicated 3 Replace the battery cover 13 BATTERY INSTALLATION BATTERY REPLACEMENT ex Low Battery Indicator When the Low Battery Indicator appears on the display screen turn the monitor off and remove all the batteries Replace with four new batteries at the same time Longlife alkaline batteries are recommended A CAUTION If battery fluid should get in your eyes immediately rinse with plenty of clean water Contact a physician immediately NOTES Turn the unit off before replacing the batteries If the batteries are removed while the unit is still on the date and time will be reset to that of the previous use However the measurement results are not deleted When the batteries are replaced you may need to reset the date and time If the year is flashing on the display screen refer to Resetting the Date and Time on page 20 A CAUTION Dispose of the device components and optional accessories according to applicable local regulations Unlawful disposal may cause environmental pollution 14 USING THE AC ADAPTER NOTES Use only the authorized Omron AC Adapter that came with this monitor We recommend you install the batteries even if the AC Adapter is used If no batteries are installed you may need to reset the date and time if the AC Adapter is disconnected The measurement results will not be deleted
13. eflating and turn off 3 Inflation stops automatically and the measurement is started As the cuff deflates decreasing numbers appear on the display The Heartbeat Symbol 4 flashes at every heartbeat l l 13 ipe igb 125 0 08 0 08 19 08 25 TAKING A MEASUREMENT 4 When the measurement is complete the arm cuff completely deflates Your blood pressure and pulse I a rate are displayed g B a 85 8 08 5 Press the START STOP button to turn the monitor off NOTE The monitor will automatically turn off after five minutes When the measurement is complete the Heartbeat Symbol flashes on the display with your blood pressure and pulse rate if the reading is above 135 for the Systolic Blood Pressure value and or 85 for the Diastolic Blood Pressure value 26 TAKING A MEASUREMENT SPECIAL CONDITIONS A CAUTION Inflating to a higher pressure than necessary may result in bruising where the cuff is applied If your systolic pressure is known to be more than 220 mmHg press and hold the START STOP button until the monitor inflates 30 to 40 mmHg higher than your expected systolic pressure NOTES Do not apply more pressure than necessary The monitor will not inflate above 299 mmHg When the measurement is complete the arm cuff completely deflates Your blood pressure and pulse rate are displayed 27 USING THE MEMORY FUNCTION The monitor is designed to store the
14. es de bruits radioel ctriques applicables aux appareils num riques de Clase B prescrites dans la norme sur le materiel brouilleur Appareils Num riques ICES 003 dict e par le minister des communications Changes or modifications not expressly approved by the party responsible for compliance could void the user s authority to operate the equipment 35 WARRANTY Your HEM 711AC IntelliSense Automatic Blood Pressure Monitor excluding the arm cuff is warranted to be free from defects in materials and workmanship appearing within 5 years from the date of purchase when used in accordance with the instructions provided with the monitor The arm cuff is warranted to be free from defects in materials and workmanship appearing within one year from the date of purchase when the monitor is used in accordance with the instructions provided with the monitor The above warranties extend only to the original retail purchaser We will at our option repair or replace without charge any monitor or arm cuff covered by the above warranties Repair or replacement is our only responsibility and your only remedy under the above warranties To obtain warranty service contact Omron Healthcare for the address of the repair location Shipping instructions and repair information is available by calling 1 800 634 4350 or visit our website at www omronhealthcare com Enclose the Proof of Purchase Include 5 00 for the return shipping and handlin
15. g Include a letter with your name address phone number and description of the specific problem Pack the product carefully to prevent damage in transit Because of possible loss in transit we recommend insuring the product with return receipt requested ALL IMPLIED WARRANTIES INCLUDING BUT NOT LIMITED TO THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR PARTICULAR PURPOSE ARE LIMITED TO THE DURATION OF THE APPLICABLE WRITTEN WARRANTY ABOVE Some states do not allow limitations on how long an implied warranty lasts so the above limitation may not apply to you OMRON SHALL NOT BE LIABLE FOR LOSS OF USE OR ANY OTHER INCIDENTAL CONSEQUENTIAL OR INDIRECT COSTS EXPENSES OR DAMAGES Some states do not allow the exclusion or limitation of incidental or consequential damages so the above exclusions may not apply to you This warranty gives you specific legal rights and you may also have other rights which may vary from state to state FOR CUSTOMER SERVICE Visit our web site at www omronhealthcare com Call toll free 1 800 634 4350 36 SPECIFICATIONS Model HEM 711AC Display LCD Digital Display Measurement Range Pressure 0 to 299 mmHg Pulse 40 to 180 min Accuracy Calibration Pressure 3mmHg or 2 of reading Pulse 596 of reading Inflation Automatic by electric pump Deflation Automatic pressure release valve Rapid Air Release Automatic exhaust valve Pressure Detection Capaci
16. ion provided in this manual A CAUTION Changes or modification not approved by Omron Healthcare will void the user warranty Do not disassemble or attempt to repair the unit or components A CAUTION Use only Omron authorized parts and accessories Parts and accessories not approved for use with the device may damage the unit 32 ERROR INDICATORS AND TROUBLESHOOTING TIPS ERROR INDICATORS SYMBOL CAUSE CORRECTION Cuff under inflated Cuff not applied tly correctly Remove the arm cuff Read Taking a Measurement Reapply the arm cuff and take another measurement Cuff over inflated Monitor could not detect pulse wave Take another measurement and remain still until the Air plug is not measurement is complete connected Replace the four batteries Refer to Battery Installation Batteries are worn 33 ERROR INDICATORS AND TROUBLESHOOTING TIPS TROUBLESHOOTING TIPS PROBLEM CAUSES AND SOLUTIONS No power Replace all four batteries with new ones No display appears on the unit Check the battery installation for proper placement of the battery polarities Blood pressure varies constantly Many factors including stress time of day and how you wrap the cuff may affect your blood pressure Review the sections Before Taking a Measurement and Taking a Measurement Measurement values appear too high or too low 34 FCC STATEMENT Note POTENTIAL FOR RADIO TE
17. lete values stored in the memory All values will be deleted 1 First press the MEMORY button While holding it down press the START STOP button together for more than 2 seconds All values will be deleted 2 Press the START STOP button to turn the monitor off NOTE The monitor will automatically turn off after 5 minutes 30 CARE AND MAINTENANCE To keep your digital blood pressure monitor in the best condition and protect the unit from damage follow the directions listed below Keep the monitor in the storage case when not in use Make sure the AC Adapter is placed under the main unit so that is does not damage the display Avoid kinking or sharply bending the AC Adapter cord Do not forcefully bend the arm cuff or air tube Do not fold tightly Clean the monitor with a soft dry cloth Do not use any abrasive or volatile cleaners Do not attempt to clean the cuff A CAUTION Do not submerge the device or any of the components in water Do not subject the monitor to extreme hot or cold temperatures humidity or direct sunlight A CAUTION Store the device and the components in a clean safe location A CAUTION Do not subject the monitor to strong shocks such as dropping the unit on the floor 31 CARE AND MAINTENANCE Remove the batteries if the unit will not be used for three months or longer Always replace all the batteries with new ones at the same time Use the unit consistent with the instruct
18. regular rhythm two or more times during the measurement the Irregular Heartbeat Symbol Q will appear on the display with the measurement values An irregular heartbeat rhythm is defined Normal Heartbeat as a rhythm that is more than 2596 slower Pulse A A A A A A or 25 faster than the average rhythm Blood fN fN JN J AN detected while the monitor is measuring pressure meotar hearbei the systolic blood pressure and the E Short Long diastolic blood pressure Pulse If the irregular heartbeat symbol CO Blood fA JN fL fN displays with your measurement results PURUS we recommend you consult your physician Follow the directions of your doctor MOVEMENT ERROR SYMBOL The Movement Error Symbol e is displayed if you move your body during the measurement Please remove the arm cuff wait 2 3 minutes reapply the arm cuff then take another measurement AVERAGE VALUE SYMBOL l The Average Value Symbol ii is displayed when you press the MEMORY button The most recent average reading appears on the display screen 10 DISPLAY SYMBOLS The American Heart Association recommends the following guideline for upper limit of normal for home blood pressure readings AHA Home Guideline for Upper Limit of Normal BP Systolic Blood Pressure 135 mmHg Diastolic Blood Pressure 85 mmHg This is a general guideline because blood pressure depends on age and morbidity The AHA recommends a lower home blood pressure goal for
19. taken in a quiet place 4 Remove tight fitting clothing from your arm 5 Sit on a chair with your feet flat on the floor Rest your arm on a table so that the cuff is at the same level as your heart 6 Remain still and do not talk during the measurement 7 Keep a record of your blood pressure and pulse readings for your physician A single measurement does not provide an accurate indication of your true blood pressure You need to take and record several readings over a period of time Try to measure your blood pressure at about the same time each day for consistency 8 Wait 2 3 minutes between measurements The wait time allows the arteries to return to the condition prior to taking the blood pressure measurement You may need to increase the wait time depending on your individual physiological characteristics KNOW YOUR UNIT Main Unit MEMORY Button Air Jack Date Time Setting Button AC Adapter Jack Components Air Tube Air Plug Connects to Air Jack Storage Case Arm Cuff p GA AC Adopter Instruction Manual UNIT DISPLAY Systolic Blood Pressure M LN Diastolic Blood Pressure Memory Symbol Heartbeat Symbol Hypertension Indicator Average Value Symbol Pulse Display Deflation Symbol Movement Error Symbol Date Time Display Low Battery Indicator Irregular Heartbeat Symbol DISPLAY SYMBOLS IRREGULAR HEARTBEAT SYMBOL Q When the monitor detects an ir
20. tive pressure sensor Measurement Method Oscillometric method Pulse Wave Detection Capacitance type pressure sensor Power Source 120V 60Hz AC adapter or 4 AA batteries Battery Life Approx 1500 uses when used 2 times a day with 4 new alkaline batteries Operating Temperature Humidity 50 F to 104 F 10 C to 40 C 30 to 85 RH Storage Temperature Humidity Air Pressure 4 F to 140 F 20 C to 60 C 10 to 95 RH 700 1060 hPa Main Unit Weight Approximately 12 1 2 oz 355 g not including batteries Main Unit Dimensions Approx 6 3 32 1 x 5 5 32 w x 3 5 16 h 155 mm x 131 mm x 84 mm Cuff Size Approx 5 3 4 w x 17 1 2 1 146 mm x 446 mm Cuff tube 23 5 8 1 600 mm Cuff Circumference Fits arm circumferences 9 to 13 220 mm to 320 mm Memory Up to 60 readings Contents Main Unit Arm Cuff AC Adapter Instruction Manual Storage Case and Warranty Card UPC Code 0 73796 07115 8 NOTE These specifications are subject to change without notice 37 Manufactured by OMRON HEALTHCARE Made in China Distributed by OMRON HEALTHCARE INC 1200 Lakeside Drive Bannockburn Illinois 60015 www omronhealthcare com Copyright O 2008 Omron Healthcare Inc
Download Pdf Manuals
Related Search