Omega FoodPro User's Manual
Contents
1. Make sure the Food Pro is unplugged N Wipe the motor base and cord with a warm sudsy cloth and wipe clean with a damp cloth Dry with a soft cloth Do not use abrasive cleansers or scouring pads o All removable parts of the Food Pro are dishwasher safe Top shelf is preferred for parts that fit If washing the Food Pro parts by hand avoid the use of abrasive cleansers or scouring pads They may scratch or cloud the work bowl and cover Thoroughly dry all parts after washing 4 Wrap the power cord around the work bowl 5 Discs shafts and blades should be stored in the provided storage case or assembled onto the Food Pro Always keep out of the reach of children FOOD PROCESSOR FEATURES This food processor includes the following items Large 11 Cup Work Bowl e Large Chopping Mixing Stainless Steel Blade e Work Bowl Cover with wide Feed Chute e Stainless Steel Dough Blade Compact 4 Cup Mini Chopper Compact Chopping Mixing Stainless Steel Blade e Wide Plunger with Narrow Plunger Insert e 2mm 4mm Stainless Steel Slicing Disc e 2mm 4mm Stainless Steel Shredding Disc Disc Adapter Custom Spatula Cleaning Tool Heavy Duty Base e Storage Container FOOD PROCESSOR FEATURES 1 Large 11 Cup Work Bowl Durable polycarbonate bowl large enough for most jobs 2 Work Bowl Cover with Wide Feed Chute Handles large items with minimal preparation 3 Large Chopping Mixing Stai2. bursts can give more accurate results NOTE If the unit fails to operate make sure the work bowl and cover are properly locked on the base 19 FOOD PROCESSING TIPS Hard cheese Example Parmesan Romano If the cheese cannot be pierced with the tip of a sharp knife it is too hard to process Do not use your Food Pro for processing If the cheese can be pierced with the tip of a sharp knife it is okay to continue Soft Cheese can be shredded with the shredding disks but when attempting to shred hard cheese you can use the multi purpose blade Place 1 inch pieces into the work bowl Process using short pulses until coarsely chopped Process continuously until finely grated Pieces of cheese can also added through the feed chute while the processor is running Soft cheese For best results with soft cheeses such as mozzarella freeze 10 to 15 minutes before processing Cut to fit feed chute Process using even pressure Julienne Matchstick slices Use the Slicing Disk to prepare julienne or matchstick style strips of produce Place food into feed chute horizontally Using the plunger push with even pressure to make plank like slices Place plank like slices into feed chute again Position the planks vertically for shorter pieces or horizontally for longer pieces Process using even pressure Slice uncooked meat or poultry Cut or roll food to fit feed chute Wrap and freeze food until hard t
3. of purchase Omega Products Inc will upon receipt of machine shipped prepaid repair such defect and return the unit prepaid This warranty does not cover breakage of any part in shipment or damage caused by misuse A service charge of 10 00 must accompany any unit over one 1 year old For service send food processor or part to Omega Products Inc 6291 Lyters Lane Harrisburg PA 17111 For additional service or operational information please contact Omega Products Inc directly Phone 717 561 1105 Fax 717 561 1298 Web Site www omegajuicers com Email omega omegajuicers com 23 Registration and Guarantee Record HD Omega Food Pro Serial Number Name Address City State Phone Zip Code Purchased From City State Date of Purchase IMPORTANT To protect your purchase fill out and mail this form within thirty 30 days of purchase 24 Omega Food Pro 11 Cup Direct Drive Food Processor with 4 Cup Mini Chopper INSTRUCTION MANUAL Omega Products Inc 6291 Lyters Lane Harrisburg PA 17111 717 561 1105 717 561 1298 fax 800 633 3401 www omegajuicers com omega omegajuicers com
4. the indicator light will remain lit if the unit has power On Once pressed the Food Pro will run continuously Off Stops the Food Pro The indicator light will remain on Pulse The Food Pro will run only when pressed Short bursts can give more accurate results NOTE If the unit fails to operate make sure the work bowl and cover are properly locked on the base Inserting Ingredients When Chopping or Mixing items may be placed around the blade before the cover is installed or placed down the feed chute during operation Most items will work best when placed around the blade before the cover is installed but not always It is best to experiment with both styles to decide which will work best for your needs Items will chop best when 1 to 1 2 inches in size Inserting Ingredients Wide Plunger w plunger insert When mixing ingredients the plunger insert can be used to drizzle liquids example oil to add the liquid slowly This is helpful when making emulsions The Wide Plunger has a recess that is approximately 4 liquid ounces to aid in measuring Dough Blade The dough blade is designed for mixing and kneading dough quickly and thor oughly For the best results do not knead recipes using more than 2 3 cups of flour 13 ASSEMBLY SLICING OR SHREDDING DISK Place the large work bowl onto the motor housing with the main handle IN to the left of the power panel This aligns the b
5. FoodPro PREMIER FOOD PROCESSOR INSTRUCTION MANUAL TABLE OF CONTENTS Introduction Food Processor Safety srn eL re RR RR ER 4 Electrica Requir mierits ssis rentre b cipere renti eec n ier te 4 Important Safeguards eee entree ream dtd eges pte Pte den dades 5 Cleaning ttl dieu eee e 6 Features and Operations Food Processor Features piinia aa Pa a Ga aa ga TAG PN na GEN aa ngan a wae waja Pak 7 9 Mulitpurpose Blade and Dough Blade Assembly aneneneenenenenna nenen an enene 10 Mulitpurpose Blade and Dough Blade Disassembly sssssssssss 11 Mulitpurpose Blade and Dough Blade Use ssssssee 12 Slicing and Shredding Disc Assembly ssssssssssseeenenns 13 Slicing and Shredding Disc Disassembly sss 14 Slicing and Shredding Disc USE smarisci iain 15 Mini Ghopper Ass mbly 2 iiie tied tenait tet evi Ee Ta aan 16 Mini Chopper Disassembly ssssssssssee eem 17 Mini Chopper Sec ids trie rd e piae aas tede leta nk aa aa eh add ag a E an AA 19 Food Processing Tips eet tent hope e tai eA Dee f et ie cte reus 20 Helpful Hlints z ctt ettet fede tereti d tede 21 22 Warranty lito POTAE ee ede eb eret 23 Registration POT tie S p dh nia be tas 24 FOOD PROCESSOR SAFETY Your safety and the safety of others are very important We have provided many important safety messages in this manual and on your appliance Always read an
6. arrots apples hard cheeses partially frozen meats etc Soft and medium hard cheese may spread out or roll up on the shredding disc To avoid this shred only well chilled cheese Sometimes slender foods such as carrots or celery fall over in the feed chute resulting in an uneven slice To minimize this cut food in several pieces and pack the feed chute with the food For processing small or slender items the small feed chute in the two piece food plunger will prove especially convenient When preparing a cake or cookie batter or quick bread use the multi purpose blade to cream fat and sugar first Add dry ingredients last Place nuts and fruit on top of flour mixture to prevent over chopping Process nuts and fruits using short pulses until blended with other ingredients Do not overprocess 21 HELPFUL HINTS When shredded or sliced food piles up on one side of the bowl stop the processor and redistribute the food using a spatula When food quantity reaches the bottom of a slicing or shredding disc remove the food 10 A few larger pieces of food may 11 remain on top of the disc after slicing or shredding If desired cut these by hand and add to mixture Organize processing tasks to minimize bowl cleanup Process dry or firm ingredients before liquid ingredients 12 To clean ingredients from the multipurpose blade easily just empty the work bowl replace the lid an
7. ator light will remain lit if the unit has power On Once pressed the Food Pro will run continuously Off Stops the Food Pro The indicator light will remain on Pulse The Food Pro will run only when pressed Short bursts can give more accurate results NOTE If the unit fails to operate make sure the work bowl and cover are properly locked on the base Inserting Ingredients Wide Plunger w plunger insert Items should be placed into the Feed Chute If needed use the Wide Plunger to push items down the feed chute If more consistent slicing is desired when slicing slender items the Narrow Plunger Insert can be used Rotate the Plunger Insert partially to unlock the insert from the Wide Plunger Place the Wide Plunger into the Feed Chute Place slender items example carrots into the narrow feed chute and use the insert plunger to push the items down the feed chute 16 ASSEMBLY MINI CHOPPER N UJ A 17 1 Place the large work bowl onto the motor housing with the main handle to the left of the power panel This aligns the bowl to properly engage the safety interlock Turn the main handle to the right until it clicks or locks into place The main handle should now be centered with the Power Panel Inset the Min Chopper Bowl into the Large Work Bowl You may have to rotate the bowl until it is properly seated The Mini Chopper Bowl is not properly inserted if it can
8. d obey all safety messages This is the safety alert symbol This symbol alerts you to potential hazards that can kill or hurt you and others All safety messages will follow the safety alert symbol and either the word DANGER or WARNING These words mean You can be killed or seriously injured if you don t follow the instructions All safety messages will tell you what the potential hazard is how to reduce the chance of injury and what can happen if the instructions are not followed ELECTRICAL REQUIREMENTS Volts 120 V A C only Hertz 60 Hz NOTE This Food Processor has a polarized plug one blade is wider than the other To reduce the risk of electrical shock this plug will fit in a polarized outlet only one way If the plug does not fit fully in the outlet reverse the plug If it still does not fit contact a qualified electrician Do not modify the plug in any way Do not use an extension cord If the power supply cord is too short have a qualified electrician or service person install an outlet near the appliance W IMPORTANT SAFEGUARDS hen using electrical appliances basic safety precautions should always be followed including the following 1 2 8 9 10 11 12 13 14 15 16 Read all instructions To protect against risk of electrical shock do not put Food Processor in water or other liquid Close supervision is necessary when any appliance is used by or near ch
9. d pulse 1 to 2 seconds to spin the blade clean 13 After removing the work bowl cover place it upside down on the counter This will help keep the counter clean 14 15 To remove the contents of the work bowl without removing the multipurpose blade grasp the work bowl from the bottom and place one finger through the center opening to hold the blade in place Then remove food from the bowl and blade with a spatula Your Food Processor is not designed to perform the following functions grind coffee beans grains or hard spices grind bones or other inedible parts of food liquefy raw fruits or vegetables slice hard cooked eggs or un chilled meats This warranty extends to the purchaser and any succeeding owner for Food Processors operated in the United States and District of Columbia Omega Food Processor Warranty 22 OMEGA PRODUCTS INC Omega Model Food Pro Omega Products Inc warrants this food processor to be free from defects of workmanship and material under normal use and service The food processor is required to be operated solely on the electric current indicated on the unit Damage or malfunction caused by use on other electrical current is excluded from this warranty This warranty is limited to repair or replacements of original parts which in the opinion of Omega Products Inc are defective in workmanship or material Should such a defect be discovered within five 5 years from date
10. ildren Unplug from the outlet when not in use before taking on or off parts and before cleaning Avoid contacting moving parts Do not operate any appliance with a damaged cord or plug or after the appliance malfunctions or is dropped or damaged in any manner Return appliance to the nearest Authorized Service Facility for examination repair or electrical or mechanical adjustment The use of attachments not recommended or sold by the manufacturer may cause fire electric shock or injury Do not use outdoors Do not let cord hang over edge of table or counter Keep hands and utensils away from moving blades or discs while processing food to reduce the risk of severe injury to persons or damage to the Food Processor A scraper may be used but must be used only when the Food Processor is not running Blades are sharp Handle carefully To reduce the risk of injury never place cutting blade or discs on base without first putting bowl properly in place Be certain cover is securely locked in place before operating appliance Never feed food by hand Always use the food plunger Do not attempt to defeat the cover interlock mechanism This product is designed for household use only CLEANING A WARNING Cut Hazard Handle blades carefully Failure to do so can result in cuts First Cleaning Before using your Omega Food Pro for the first time wash all removable parts Cleaning the Food Processor
11. nless Steel Blade Multi use blade for quick mincing chopping mixing and emulsifications 4 Stainless Steel Dough Blade Mixes and kneads dough 5 Compact 4 Cup Mini Chopper with C hopping Mixing Stainless Steel Blade Instantly converts 11 Cup Processor to 4 Cup Mini Chopper Convenient for small everyday jobs 6 Wide Plunger with Narrow Plunger Insert Use Wide Plunger and Wide Feed Chute for larger items For smaller or slender items use plunger insert and s mall feed chute The wide plunger can also be used as a convenient 4 oz measure The plunger insert has a small hole in the bottom of the plunger for emulsifications The small hole slowly drizzles oil into the work bowl 10 FOOD PROCESSOR FEATURES 7 2mm 4mm Stainless Steel Slicing Disk The two sided disc will produce two different size slices depending on the side used 4 mm Side 1 8 inch Slices approx 2 mm Side 1 16 inch Slices approx 8 2mm 4mm Stainless Steel Shredding Disc The two sided disc will produce two different size shreds depending on the side used 4 mm Side 1 8 inch Shreds approx 2 mm Side 1 16 inch Shreds approx 9 Disk Adapter Adapter installs into the center of a slicing or shredding disc and onto the power shaft 10 Custom Spatula Cleaning Tool Spatula Tool is designed for the shape of the work bowl for easier removal of food from bowls 11 Heavy Duty Base On Off and Pulse Control on P
12. o the touch 30 minutes to 2 hours depending on thickness of food Check to be sure you can still pierce food with the tip of a sharp knife If not allow items to thaw slightly Process using even pressure Slice cooked meat or poultry food should be very cold Cut in pieces to fit feed chute Process using even pressure 20 HELPFUL HINTS 1 Never process any food that is so hard or firmly frozen that it cannot be pierced with the tip of a sharp knife Hard food can cause damage to the blade or motor If a piece of hard food such as carrot becomes wedged or stuck on the blade stop the processor and remove the blade Carefully remove food from the blade Do not overfill work bowl or mini bowl For thin mixtures fill work bowl up to 1 2 to 2 3 full For thicker mixtures fill work bowl up to 3 4 full For liquids fill up to the maximum level as described on page XX When chopping the work bowl should be no more than 1 3 to 1 2 full Use the mini bowl for up to 1 cup of liquid or 1 2 cup solids To capitalize on the speed of the processor drop ingredients to be chopped through the feed chute while the processor is running 4 Different foods require varying degrees of pressure for best shredding and slicing results In general use light pressure for soft delicate foods strawberries tomatoes etc moderate pressure for medium foods zucchini potatoes etc and firmer pressure for harder foods c
13. ower Panel Houses Motor with power shaft 10 ASSEMBLY LARGE BLADE OR DOUGH BLADE 1 Place the large work bowl onto the motor housing with the main handle to the left of the power panel This aligns the bowl to properly engage the safety interlock Turn the main handle to the right until it clicks or locks into place The main handle should now be centered with the Power Panel Y Place the Large Blade or Dough Blade onto the main motor shaft You may have to rotate the blade partially to properly seat onto the shaft Place the Work Bowl Cover onto the Work Bowl with the interlock tab to the left of the main handle Turn the Cover to the right until it clicks or locks into place The tab should now be aligned with the Main Handle UJ 11 DISASSEMBLY LARGE BLADE OR DOUGH BLADE 12 1 Rotate the Cover to the left until the tab is unseated 2 Remove the Blade by pulling upward If the blade is held in place by ingredients it may be removed with the Work Bowl 3 Rotate the Main Handle to the left until it is unseated and lift off of the motor housing USING LARGE BLADE OR DOUGH BLADE Maximum Liquid Level This line is visible on the work bowl Use as an indication of the maximum amount of liquid that can be used in the Food Pro Power Pad The Food Pro will not operate until the Large Work Bowl and the Work Bowl Cover are both properly installed Once installed
14. owl to properly engage the safety interlock turn the main handle to the right until it clicks or locks into place The main handle should now be centered with the Power Panel N The desired size of Slicing or Shredding should be facing away from the adapter when installing the disk UJ Place the Slicing or Shredding disk onto the Disc Adapter Be sure to align the center hole of the disk with the disc adapter A Once the Adapter is inserted into the Disk rotate the disk until it is seated 5 Place the Adapter Disk Assembly onto the main motor shaft You may have to rotate the assembly partially to properly seat onto the shaft Oo Place the Work Bowl Cover onto the Work Bowl with the interlock tab to the left of the main handle Turn the Cover to the right until it clicks or locks into place The tab should now be aligned with the Main Handle 14 DISASSEMBLY SLICING OR SHREDDING DISK Rotate the Cover to the left until the tab is unseated N Remove the Disk and Adapter by pulling upward 3 Remove the Disk from the Adapter by rotating the disk and or adapter 4 Rotate the Main Handle to the left until it is unseated and lift off of the motor housing 15 USING SLICING OR SHREDDING DISK POWER PAD The Food Pro will not operate until the Large Work Bowl and the Work Bowl Cover are both properly installed Once installed the indic
15. still be rotated Place the Mini Blade onto the main motor shaft You may have to rotate the blade partially to properly seat onto the shaft Place the Work Bowl Cover onto the Work Bowl with the interlock tab to the left of the main handle Turn the Cover to the right until it clicks or locks into place The tab should now be aligned with the Main Handle DISASSEMBLY MINI CHOPPER 1 Rotate the Cover to the left until the tab is unseated 2 Remove the Mini Blade by pulling upward If the blade is held in place by ingredients it may be removed with the Mini Chopper Bowl UJ Remove the Mini Chopper Bowl from the Large Work Bowl There are two finger tabs on inner surface of the bowl Using two fingers the bowl can be removed easier 4 Rotate the Main Handle to the left until it is unseated and lift off of the motor housing 18 USING MINI CHOPPER Power Pad Inserting Ingredients The Food Pro will not operate until the Place the items into the Mini Chopper Large Work Bowl and the Work Bowl bowl after the blade has been installed Cover are both properly installed Once Additional ingredients can be placed installed the indicator light will remain lit down the feed chute if the unit has power On Once pressed the Food Pro will run continuously Off Stops the Food Pro The indicator light will remain on Pulse The Food Pro will run only when pressed Short
Download Pdf Manuals
Related Search