Omega Engineering I/32 User's Manual
Contents
1. Servicing Europe Benelux Postbus 8034 1180 LAAmstelveen The Netherlands TEL 31 20 3472121 FAX 31 20 6434643 Toll Free in Benelux 0800 0993344 e mail n omega com Rud arm dy 1868 733 01 Karvin 8 TEL 420 69 6311899 FAX 420 69 6311114 e mail czech omega com France 9 rue Denis Papin 78190 Trappes TEL 33 130 621 400 FAX 33 130 699 120 Toll Free in France 0800406342 e mail france omega com Daimlerstrasse 26 D 75392 Deckenpfronn Germany TEL 49 7056 9398 0 FAX 49 7056 9398 29 Toll Free in Germany 0800 639 7678 e mail germany omega com One Omega Drive River Bend Technology Centre Northbank Irlam Manchester M44 5BD United Kingdom TEL 44 161 777 6611 FAX 44 161 777 6622 Toll Free in England 0800 488 488 e mail sales omega co uk Czech Republic Germany Austria United Kingdom ISO 9002 Certified on setting up your instrument for basic operation The latest complete Communication and Operational Manual as well as free Software and ActiveX Controls are available at www omega com specsi iseries or on the CD ROM enclosed with your shipment SAFETY CONSIDERATION This device is marked with the international Caution symbol ones This Quick Start Reference provides information The instrument is a panel mount device protected in accordance with Class Il of EN61010 1 Remember that the unit has no power on switch Building installation should include a switch or circuit breaker t2. 1 year from the date of purchase In addition to OMEGA s standard warranty period OMEGA Engineering will extend the warranty period for four 4 additional years if the warranty card enclosed with each instrument is returned to OMEGA If the unit malfunctions it must be returned to the factory for evaluation OMEGA s Customer Service Department will issue an Authorized Return AR number immediately upon phone or written request Upon examination by OMEGA if the unit is found to be defective it will be repaired or replaced at no charge OMEGA s WARRANTY does not apply to defects resulting from any action of the purchaser including but not limited to mishandling improper interfacing operation outside of design limits improper repair or unauthorized modification This WARRANTY is VOID if the unit shows evidence of having been tampered with or shows evidence of having been damaged as a result of excessive corrosion or current heat moisture or vibration improper specification misapplication misuse or other operating conditions outside of OMEGA s control Components which wear are not warranted including but not limited to contact points fuses and triacs OMEGA is pleased to offer suggestions on the use of its various products However OMEGA neither assumes responsibility for any omissions or errors nor assumes liability for any damages that result from the use of its products in accordance with information provided by OMEGA
3. ABOV ENBL 7BIT GREEN LO BELO 8BIT RED HI LO HLLO STOP AMBER BAND BAND DSBL 1 BIT ENBL ADIT P ON DSBL BUS F DAT F BL MbUS STAT ALR L ALR L YES NQ YES NO VALUE VALUE 100 0 100 0 ECHO PEAK LFEED RDNG YES NO YES NO ALR H ALR H YES NO YES NO VALUE VALUE 400 0 400 0 STND VALY 232C YES NO 485 UNIT MODE YES NO CMD CONT ADDR SEPR VALUE CR 9001 SPACE TRTM VALUE
4. panel so the gasket seals between the bezel and the front of the panel 3 Slide the retainer over the rear of the case and tighten against the backside of the mounting panel Disassembly Instruction If necessary the unit may be removed from the panel and opened Warning Disconnect all ac power from the unit before proceeding Make sure the AC power is disconnected Remove all wiring connections from the rear of the meter To remove power and input connectors bend the side panel detents on the case outward to release the connectors then pull connectors from the meter 3 To remove meter from the case squeeze left and right sides of the bezel to release then pull from case Na WIRING Wire the instrument according to the figure shown below Warning Do not connect ac power to your device until you have completed all input and output connections This device must only be installed by a specially trained electrician with corresponding qualifications Failure to follow all instructions and warnings may result in injury PULSE OUTPUT z lz aa OUTPUT 2 OUTPUT 1 POWER olo ololZ E OUTPUT 4 Zz o Q FfJalolelo oln EARS INPUT RS232 485 RELAY OUTPUT o S 2 I THERMOCOUPLE RTD 100 Q RTD 1 KO INPUT INPUT INPUT afdol
5. 20 Display available Temperature Units Press to display the flashing Degree Mid or i Step 21 Scroll through Temperature Units selection Press to select Id Degree Step 22 Store the Temperature Unit Press to display momentarily that the Degree Unit has been stored and the instrument will go automatically to the next menu item Step 23 Enter the Filter Constant Submenu Display shows BMA Filter Constant Submenu Step 24 Display the Filter Constant Value Submenu Press to display the flashing previously selected Filter Constant Step 25 Scroll through available Filter Constants Press to sequence thru Filter Constants HN HEPR GEE GEE WEB EES EEE and Step 26 Store the Filter Constant Press momentarily to store HEE Filter Constant and the instrument will automatically go to the next menu item Step 27 Enter Alarm 1 Menu The display will show GEE the top menu for Alarm 1 In the following steps we are going to enable Alarm 1 Deviation Unlatch Normally Open Active Above Enable at power on and 2 F High Alarm i e Process Value gt Setpoint 1 Value 2 F will activate Alarm 1 Step 28 Enter Alarm 1 Enable Disable Submenu Press to display flashing ERA GET Step 29 Enable Alarm 1 Submenu If flashing BRE is displayed press if EET is displayed press until S EIS is displayed then press to store and go to the next menu item Step 30 Select the Deviation Control Type Subme
6. digit value pressing button will always direct the instrument one step backward of the top menu item The second push on the button will reset the instrument except after the setpoint and the alarms that will go to the RUN Mode without resetting the instrument The button will always sequence the instrument thru the menu items The button has two functions 1 To save a selected flashing display 2 To direct the instrument to the next submenu level RUN Mode causes the display to flash the PEAK with the corresponding value Press again to go back to RUN Mode causes the display to flash VALLEY with the corresponding value Press again to go back to RUN Mode causes flashing PEAK or VALLEY to reset corresponding values Press one more time to go back to RUN Mode FLOW CHART ID ID FULL SP ID y Y RUN SP1 SP2 CNFG VALUE VALUE 0000 oooo INPT H RDG OPERATION For Thermocouple Input Step 1 Apply Power to the Instrument When your device is first powered up it will display the ambient temperature assume 75 F Step 2 Enter Setpoint 1 Menu Press one time from run mode to get to Setpoint 1 Step 3 Enter the Setpoint 1 Value Submenu Press Display shows the previous selection of Setpoint 1 Step 4 Change the Setpoint 1 Value Press or until desired value is displayed Step 5 Store the Setpoint 1 Value Set the S
7. machine readable form in whole or in part without the prior written consent of OMEGA ENGINEERING INC PATENT AND TRADEMARK NOTICE This product is covered by one or more of the following patents U S Pat No Des 336 895 5 274 577 6 243 021 CANADA 2052599 2052600 ITALY 1249456 1250938 GERMANY DE 41 34398 C2 SPAIN 2039150 2048066 UK Patent No GB2 249 837 GB2 248 954 FRANCE BREVET NO 91 12756 The Meter Bezel Design is a trademark of Newport Electronics Inc USED UNDER LICENSE Other U S and International Patents pending or applied for MQS3448 0102 iSeries i 32 Temperature amp Process Monitor Alarm omega com OZOMEGA OMEGAnet On Line Service Internet e mail www omega com info omega com Servicing North America USA One Omega Drive P O Box 4047 ISO 9001 Certified Stamford CT 06907 0047 TEL 203 359 1660 e mail info omega com Canada 976 Bergar Laval Quebec H7L 5A1 TEL 514 856 6928 e mail info omega ca FAX 203 359 7700 FAX 514 856 6886 For immediate technical or application assistance USA and Canada Sales Service 1 800 826 6342 1 800 TC OMEGA Customer Service 1 800 622 2378 1 800 622 BEST Engineering Service 1 800 872 9436 1 800 USA WHEN TELEX 996404 EASYLINK 62968934 CABLE OMEGA Mexico and TEL 001 800 TC OMEGA FAX 001 203 359 7807 Latin American En Espa ol 001 203 359 7803 e mail info omega com mx
8. 4 Vac J K T E R S B C N L but No Certification for CE UL are claimed RTD ITS68 Dimensions 100 500 1000 ohm Pt sensor 2 3 or 4 wire 0 00385 or 0 00392 25 4 H x48 W x 126 3 D mm 1 0 x 1 89 x 5 curve Weight Voltage 127 g 0 28 Ib 0 to 100 mV 0 to 1 V 0 to 10 Vdc Approvals Current UL C UL CE per EN50081 1 0 to 20 mA 4 to 20 mA EN50082 2 EN61010 1 WARNING These products are not designed for use in and should not be used for patient connected applications Setup Guide before installing or commissioning this device as the guide contains important f This device is marked with the international caution symbol It is important to read the information relating to safety and EMC It is the policy of OMEGA to comply with all worldwide safety and EMC EMI regulations that apply OEMGA is constantly pursuing certification of its products to the European New Approach Directives OMEGA will add the CE mark to every appropriate device upon certification The information contained in this document is believed to be correct but OMEGA Engineering Inc accepts no liability for any errors it contains and reserves the right to alter specifications without notice TRADEMARK NOTICE SE omega com CE OMEGA and ia are Trademarks of OMEGA ENGINEERING INC USA WARRANTY DISCLAIMER OMEGA ENGINEERING INC warrants this unit to be free of defects in materials and workmanship for a period of one
9. Step 10 Enter to the Thermocouple Input Submenu Press to store Thermocouple Input The ey will stop flashing and show the top menu for Thermocouple types If you press controller will step to next menu item Skip to Step 14 Step 11 Enter to the Thermocouple Type Input Submenu Press to display flashing previously selected Thermocouple type Step 12 Scroll through available selection of TC types Press O to sequence thru flashing Thermocouple types select k for type K CHROMEGA ALOMEGA JKT EN DINJ RS B C TC types J kt EN dNJ R S b C Display Step 13 Store TC type After you have selected the Thermocouple type press to store your selection the instrument automatically advances to the next menu item Step 14 Enter to Reading Configuration Menu The display shows Reading Configuration which is the top menu for 4 submenus Decimal Point Degree Units Filter Constant and Input Reading Submenus Step 15 Enter to Decimal Point Submenu Press to show BB Decimal Point Step 16 Display the Decimal Point position Press again to display the flashing Decimal Point position Step 17 Select the Decimal Point position Press Q to select Decimal Point position Step 18 Store selected Decimal Point position By pressing momentarily the Decimal Point position will be stored and the instrument will go to the next menu item Step 19 Enter to Temperature Unit Submenu Display shows Temperature Unit Step
10. either verbal or written OMEGA warrants only that the parts manufactured by it will be as specified and free of defects OMEGA MAKES NO OTHER WARRANTIES OR REPRESENTATIONS OF ANY KIND WHATSOEVER EXPRESS OR IMPLIED EXCEPT THAT OF TITLE AND ALL IMPLIED WARRANTIES INCLUDING ANY WARRANTY OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE HEREBY DISCLAIMED LIMITATION OF LIABILITY The remedies of purchaser set forth herein are exclusive and the total liability of OMEGA with respect to this order whether based on contract warranty negligence indemnification strict liability or otherwise shall not exceed the purchase price of the component upon which liability is based In no event shall OMEGA be liable for consequential incidental or special damages CONDITIONS Equipment sold by OMEGA is not intended to be used nor shall it be used 1 as a Basic Component under 10 CFR 21 NRC used in or with any nuclear installation or activity or 2 in medical applications or used on humans Should any Product s be used in or with any nuclear installation or activity medical application used on humans or misused in any way OMEGA assumes no responsibility as set forth in our basic WARRANTYDISCLAIMER language and additionally purchaser will indemnify OMEGA and hold OMEGA harmless from any liability or damage whatsoever arising out of the use of the Product s in such a manner RETURN REQUESTS INQUIRIES Direct all warranty and repair req
11. elalalelelell Slalelslelele N Lt lt Liw PROCESS VOLTS PROCESS CURRENT PROCESS CURRENT INPUT INPUT INPUT E z Zjujojejojoj jaujojjojojn E alo sfo oln ao L 1 or 10V oH Internal r4 lt L 100 mV zlih F Excitation Return External Excitation k Jumper Connect the main power connections as shown in the figure below OUTPUT 2 OUTPUT1 POWI Use Copper o Conductors o lz 2 only for Power Connections A A Ll L MA t EQUIVALENT AC POWER DC POWER 90 240 Vac 110 375 Vdc 50 400 Hz o 9o ojz z AIAIA Ly eS 2 Fuse 3 Sw NA Fuse 2 a N External O O N Load or L e Ve LOW VOLTAGE POWER OPTION Fuse 1 po Fuse 4 D External a N s O O N Load 24Vac A 12 36 Vdc See Specification Section FUSE Connector Output Type For 115Vac For 230Vac DC FUSE 1 Output 1 Relay 3 A T 3 A T z FUSE 2 Output 2 Relay 3 A T 3 A T Z FUSE 3 Power N A 100 mA T 100 mA T 100 mA T FUSE 4 Power N A N A N A 400 mA T Output 1 and 2 are for AL Alarm Option only CONFIGURATION MENU Mode Flashing display in MENU Mode means you can make your selection by pressing button If the flashing display is not a four
12. etpoint 1 to 10 degree higher than Process value SP1 85 and press to store display flashes message and advances to Setpoint 2 Menu Step 6 Store the Setpoint 2 Value Repeat steps 3 and 4 Set the Setpoint 2 to 5 degree higher than Process value SP2 80 and press to store display flashes message and advances to NEG Configuration Menu Step 7 Enter the Input Type Menu Press to enter PiN PE Input Type Menu Step 8 Enter to the submenu items of Input Menu Press to display Input Process RTD or Thermocouple If flashing is displayed press and proceed to Step 11 Step 9 Scroll through available selection of Input Menu Press until a flashing B for Thermocouple is displayed Underline denotes factory default setup F FFF RTD 100 500 _TEMP 1000 EC 392 2 392 3 FLTR 392 4 1 2 4 8 385 2 16 32 385 3 64 128 385 4 PROC ar 00 1V wie 0 1 0V OH10V gue 0 20 mA ie VALUE RD2 VALUE ALR1 f arre RADJ gt D gt comm COLR BL DSBL VALUE C PAR N CLR ENBL ENBL 000 0 BAUD GREEN 300 600 RED SO ABSO SP DV ee AMBER ABSO ABSO DSBL pps DEV DEV ENBL 9600 1 CLR 49200 GREEN LTCH LTCH Bary RED LTCH LTCH NO AMBER UNLT UNLT ODD EVEN ACTV ACTV DsBY Spr C2CER ABOV
13. hat must be compliant to IEC 947 1 and 947 3 SAFETY Do not exceed voltage rating on the label located on the top of the instrument housing e Always disconnect power before changing signal and power connections e Do not use this instrument on a work bench without its case for safety reasons Do not operate this instrument in flammable or explosive atmospheres e Do not expose this instrument to rain or moisture EMC e Whenever EMC is an issue always use shielded cables e Never run signal and power wires in the same conduit e Use signal wire connections with twisted pair cables e Install Ferrite Bead s on signal wire close to the instrument if EMC problems persist MOUNTING 1 772 024 000 057 0145 i 45 00 0 61 0 00 F Sa j i Loo E 0 886 024 000 iy H 22 50 0 61 0 00 _ 4 R0 060 R1 52 PANEL THICKNESS p 0 25 6 4 MAX 4 40 nna gt 4 PLCS 0 03 08MIN e PANEL CUTOUT 1 89 48 0 0 0 BRAA v SESS a 1 00 25 4 L eo elololo TOP VIEW FRONT VIEW 1 89 48 0 f Fonon 1 00 25 4 ER case Retainer Rear Connector Panel Mounting Instruction 1 Using the dimensions from the panel cutout diagram shown above cut an opening in the panel 2 Insert the unit into the opening from the front of the
14. nu Press If flashing Deviation is displayed press otherwise press until flashing BEI is shown Now press to store and go to next menu item Step 31 Select the Latched Type Submenu Press If flashing HE Unlatched is displayed press otherwise press until HIME is displayed Press to store and advance to next menu item Step 32 Select the Normally Open Type of Contact Closure Submenu Press If flashing Normally Open is displayed press otherwise press Q until Co is displayed Press to store and advance to next menu item Step 33 Select the Above Type of Active Submenu Press If flashing HER Above is displayed press otherwise press until EIR is displayed Press to store and advance to next menu item Step 34 Enable Alarm 1 at Power On EEES Press If flashing BREH is displayed press otherwise press until Ene is displayed Press to store and advance to next menu item Step 35 Enter Alarm 1 High Submenu Press twice to skip Alarm 1 Low value BMEM is for below amp EMENI for above Step 36 Set the Alarm 1 High value EMEA Press Press or until value to set the display to Press to save Step 37 Enter the Alarm 2 Menu The display will show GIS the top menu for Alarm 2 Repeat steps from 28 to 36 to set for Alarm 2 the same conditions as for Alarm 1 Step 38 Configuration of Display Color Selection Press until the Display Color Selecti
15. on Menu appears on the Display Configure MIG as MIN green EAST Red red GETS amber Please refer to the operator s manual if needed Step 39 Run a Test Press until reset the controller and return to RUN Mode to display Ambient Temperature Now you are ready to observe temperature as it rises 10 F higher than displayed Touch the tip of the Thermocouple to raise the temperature above the Alarm 2 High value MEENA and AL2 will turn on and Display Color will change from Green to Amber Continue touching the tip to raise the temperature above the Alarm 1 High value HERR and Display Color will change from Amber to Red SPECIFICATION Accuracy Output 1t 0 5 C temp Relay 250 Vac 3 A Resistive Load 0 03 rdg process typical SSR Pulse Resolution Output 2t 1 0 1 10 uV process Relay 250 Vac 3 A Resistive Load Temperature Stability SSR Pulse t Only with AL option 0 05 C C TC 25 C 77 F Options Communication 50 ppm C process RS 232 RS 485 or Display Excitation 24 Vdc 25 mA 4 digits 9 segments LED Not available for Low Power Option f wi f Line Voltage Power 10 2 mm 0 40 with red green and a amber programmable colors 90 240 Vac 10 50 400 Hz Input Types or 110 375 Vde 4w Thermocouple RTD Analog Voltage L ear athe ati eh sonz and Current ow Voltage Power Option 12 36 Vdc 3 W 0 04 C C RTD TC ITS90 Units can be i powered safely with 2
16. uests inquiries to the OMEGA Customer Service Department BEFORE RETURNING ANY PRODUCT S TO OMEGA PURCHASER MUST OBTAIN AN AUTHORIZED RETURN AR NUMBER FROM OMEGA S CUSTOMER SERVICE DEPARTMENT IN ORDER TO AVOID PROCESSING DELAYS The assigned AR number should then be marked on the outside of the return package and on any correspondence The purchaser is responsible for shipping charges freight insurance and proper packaging to prevent breakage in transit FOR WARRANTY RETURNS please have the FOR NON WARRANTY REPAIRS consult OMEGA for following information available BEFORE current repair charges Have the following information contacting OMEGA available BEFORE contacting OMEGA Purchase Order number under which the product 1 Purchase Order number to cover the COST of the was PURCHASED repair Model and serial number of the product under 2 Model and serial number of product and warranty and 3 Repair instructions and or specific problems relative to the product Repair instructions and or specific problems relative to the product OMEGA s policy is to make running changes not model changes whenever an improvement is possible This affords our customers the latest in technology and engineering OMEGA is a registered trademark of OMEGA ENGINEERING INC Copyright 2002 OMEGA ENGINEERING INC All rights reserved This document may not be copied photocopied reproduced translated or reduced to any electronic medium or
Download Pdf Manuals
Related Search