Home

Olympus D-780 Instruction Manual

1. d The factory default settings differ according to the region where the camera is sold To play back camera images on a TV e Connection via AV cable D Use the camera to select the same video signal system as the one of connected TV NTSC PAL 2 Connect the TV and camera 3 Turn on the TV and change INPUT to VIDEO an input jack connected to the camera 4 Turn on the camera and use A V IP to select the image for playback Multi connector AV cable Connect to the TV video sold separately CB AVC5 input jack yellow and audio input jack white e For details on changing the input source of the TV refer to the TV s instruction manual e Depending on the TV s settings the displayed images and information may become cropped EN 39 Saving battery power between shots f Power Save Submenu 2 Application Off Cancels Power Save When the camera is not being used for approx 10 seconds the On monitor automatically turns off to save battery power To resume standby mode Press any button Changing the display language f III Submenu 2 Application The language for the menus and error messages displayed on the monitor is selected Languages Setting the date and time f C D Press the Arrow pad to A V to select the year for Y 2 Press the Arrow pad to to save the setting for Y 3 As in Steps and D press the Arrow pad to
2. To prevent causing battery leaks or damaging their terminals carefully follow all instructions regarding the use of batteries Never attempt to disassemble a battery or modify it in any way solder etc If battery fluid gets into your eyes flush your eyes immediately with clear cold running water and seek medical attention immediately Always store batteries out of the reach of small children If a child accidentally swallows a battery seek medical attention immediately e If you cannot remove the battery from the camera contact an authorized distributor or service center Do not try to remove the battery by force Damage to the battery exterior scratches etc may produce heat or an explosion 70 EN AN WARNING Do not wet batteries with fluid such as water or seawater To prevent batteries from leaking overheating or causing a fire or explosion use only batteries recommended for use with this product e Insert the battery carefully as described in the operating instructions e f rechargeable batteries have not been recharged within the specified time stop charging them and do not use them Do not use a battery if it is cracked or broken e If a battery leaks has unusual odor becomes discolored or deformed or becomes abnormal in any other way during operation stop using the camera and keep away from fire immediately e If a battery leaks fluid onto your clothing or skin remove the clothing and flus
3. 3 Follow Steps 5 and 6 in DO Resetting all print reservation data 1 Follow Steps 1 and 2 in L1 p 48 2 Select either 04 or d and press the 99 button 3 Use A V to select Reset and press the 9 button EN 49 Resetting the print reservation data for selected images 1 2 3 4 50 Follow Steps 1 and 2 in 11 p 48 Use A V to select 11 and press the button Use A V to select Keep and press the 9 button Use lt to select the image with the print reservation you want to cancel Use A V to set the print quantity to 0 If necessary repeat Step 4 and then press the button when finished Use A V to select the date print screen option and press the 9 button e The settings are applied to the remaining images with the print reservation data Use A V to select Set and press the 9 button EN Usage Tips If the camera does not work as intended or if an error message is displayed on the screen and you are unsure of what to do refer to the information below to fix the problem s Troubleshooting Battery The camera does not work even when batteries are installed e Insert recharged batteries in the correct direction Inserting and removing the battery and card commercially available p 4 Charging the battery p 5 e Battery performance may have been reduced temporarily due to low temperature Take the
4. 1 Shootingmode v y 2 Flash v v 3 Selttime v w y 4 Exposure 5 Whiebalance v w 6 ISO sensitivity Pium still images 9 Aspect length still pictures Camera shake warning KAE ES Rs eene stt EH HEE D The displays change in the order of Normal Detailed No info each time A INFO is pressed 12 EN Selecting the shooting mode The default settings of the function are highlighted in Shooting mode Submode P P mode 2 iAUTO iAUTO mode W DIS Mode a BEAUTY BEAUTY mode Recommended Set 1 Set 2 Set 3 e F Super Macro mode Q Portrait f ig Landscape FQ Night Scene 9s Night Portrait amp Sport 5 5 Indoor amp i amp Candle Su Self Portrait z amp Sunset XA Fireworks Cuisine i amp Documents FJ4 Beach amp Snow 4 Pet Pop Art Pin Hole Fish Eye Soft Focus Punk Sparkle Watercolor Reflection Miniature SCN SCN mode MAGIC MAGIC mode HI Panorama mode B e List of settings available in each shooting mode p 57 List of SCN settings p 58 List of MAGIC settings p 60 Press 1 of the arrow pad on standby mode screen first and press JP to select shooting mode d To select the BEAUTY SCN and MAGIC submodes display submodes by using V first Then use lt I gt to select the desired submode and press the 99 button Scene Mode i NA yl To select a submode Port
5. Erasing images during playback 1 Display the image you want to erase and press V D TM MENU 4 30 2 Press A V to select Erase and press the 9 button e Grouped images are erased as a group e Multiple images or all images can be erased at a time p 34 20 EN Shooting movies Playing back movies 1 Press the button to start recording e Pausing and restarting Lights up red when playback recording Recording time Recording length p 64 Fast forward e The movie is shot in the set shooting mode Note that the shooting mode effects may not be obtained Rewind for some shooting modes e Sound is also recorded Adjusting the 2 Press the button again to stop volume recording Select a movie and press the 9 button cM 7 M 4 During playback Press the 9 button to pause playback During pause fast forward or reverse press the button to restart playback Press to fast forward Press gt again to increase the fast forward speed Press lt to rewind Press lt again to increase the rewind speed Use A V to adjust the volume EN 21 Operations while playback is paused Elapsed time Total shooting time During pause Use A to display the first frame and press V to display the last frame Cueing Press gt or 1 to advance or rewind one frame at a time Hold gt or lt pressed for continuous advance or rewind Press the x button to
6. Ob amp 12sec The self timer lamp turns on for approx 10 seconds then blinks for approx 2 seconds and then the picture is taken e 2 sec The self timer lamp blinks for approx 2 seconds then the picture is taken Exposure compensation Compensates the brightness appropriate exposure adjusted by the camera 2 to 2 Value Set a larger negative value to adjust darker or a larger positive value to adjust brighter White balance Sets an appropriate color scheme for the light of the shooting scene AB WB Auto The camera automatically adjusts the white balance E Sunny Suitable for shooting outdoors under a clear sky e Cloudy Suitable for shooting outdoors under a cloudy sky z Incandescent Suitable for shooting under tungsten lighting D N D N D a N Fluorescent Suitable for shooting under white fluorescent lighting For manually adjusting the white balance according to the light when shooting Set a 9 One Touch 1 e m piece of white paper or other white object so that it fills the entire screen and press the MENU button to set the white balance For the settings of one touch WB refer 5 One Touch 2 to p 25 ISO sensitivity Sets the ISO sensitivity PA ISO Auto The camera automatically sets the sensitivity with priority on image quality too to io Value Set a smaller value to reduce noise in the picture or a larger val
7. Press the MENU button during shooting or playback to display the setup menu The setup menu provides access to a variety of camera settings such as shooting and playback functions time and date settings and display options 1 Press the MENU button 3 Use A V to select the desired e The setup menu is displayed submenu 1 and then press the Camera Menu 1 button Compression Normal Submenu 2 AF Mode Face iESP Digital Zoom Off AF Illuminat On Icon Guide On Date Stamp off Settings Menu 2 a a 9o tl v v 2 Press lt to select the page tabs Use A V to select the desired page tab and press gt Page tab Senne 4 Use AV to select the desired submenu 2 and then press the button Selat e Once a setting is selected the display returns power Save or 7 power Save to the Submenu 1 S A ee bed Deedee e There may be additional operations World Time tt World Time tt English 13 02 26 12 30 World Time tt 5 Press the MENU button to complete the setting EN 27 e The default settings of the function are highlighted in e For the operation method refer to Using the setup menu p 27 E Camera Menu 1 Restoring the shooting functions to the default settings EQ Reset Submenu 2 Application Restores the following menu functions to the default settings Shooting mode Flash Self timer Exposure compensation Yes White balance SO sensitivity Drive Image Size
8. olympus com for the authorized international Olympus service network EN 75 For customers in Asia Provisions of warranty 1 If this product proves to be defective although it has been used properly in accordance with the written Handling Care and Operating instructions supplied with it during a period of up to one year from the date of purchase this product will be repaired or at Olympus s option replaced free of charge To claim under warranty the customer must take the product and this Warranty certificate before the end of the one year warranty period to the dealer where the product was purchased or any Olympus authorized service station listed in the instructions and request the necessary repairs 2 The customer shall transport the product to the dealer or Olympus authorized service station at his own risk and shall be responsible for any costs incurred in transporting the product 3 This warranty does not cover the following and the customer will be required to pay repair charge even for defects occurring within the one year period referred to above a Any defect that occurs due to mishandling such as an operation performed that is not mentioned in the Handling Care or other sections of the instructions etc b Any defect that occurs due to repair modification cleaning etc performed by anyone other than Olympus or an Olympus authorized service station c Any defect or damage that occurs due to transport a fall
9. Submenu 2 Application Print This prints the image selected in Step 8 All Print This prints all images stored in the internal memory or card Multi Print This prints one image in a multiple layout format This prints an index of all images All Index stored in the internal memory or card Print Order This prints images based on the print reservation data on the card Print Order is available only when print reservations have been made Print Reservations p 48 46 EN Borderless or Pics Sheet settings and press the button Submenu 4 Off On Application The image is printed with a border around it Off The image is printed to fill the entire paper On The number of images per sheet varies depending on the printer The number of images per sheet Pics Sheet is selectable only when Multi Print is selected in Step 4 The available settings for Borderless vary depending on the printer If Standard is selected in Steps 5 and 6 the image is printed at the printer s standard settings 7 Use lt to select an image 8 Press A to make a print reservation for the current image Press V to make the detailed printer settings for the current image To make the detailed printer settings D Use A V lt to select the setting and press the button Submenu 5 Submenu 6 Application DX 0 to 10 This selects the number of prints Selecting With
10. button on the review screen to save the image e Registration is complete EN 41 Connecting with a computer Set USB Connection in the setup menu of the camera beforehand p 37 Connecting the camera USB cable supplied 42 EN When USB Connection is set to Auto connect the camera and the computer select Storage or MTP at the screen for selecting the connection method and then press the button System requirements Windows Windows XP Home Edition Professional SP1 or later Windows Vista Windows 7 Windows 8 Macintosh Mac OS X v10 3 or later e Even if a computer has USB ports proper operation is not guaranteed in the following cases e Computers with USB ports installed using an expansion card etc e Computers without a factory installed OS and home built computers e When the computer does not support SDXC cards a message may appear urging to format the internal memory or card Formatting will completely erase all images so do not format Installing the PC software and registering user Windows Insert the supplied CD in a CD ROM drive Windows XP e A Setup dialog will be displayed Windows Vista Windows 7 Windows 8 e An Autorun dialog will be displayed Click OLYMPUS Setup to display the Setup dialog pe Oty wi a A A e f the Setup dialog is not displayed select My Computer Windows XP or
11. still images Aspect Camera Menu 1 Camera Menu 2 and Movie Menu Functions Selecting the image quality for still images DI Compression Submenu 2 Application Fine Shooting at high quality Normal Shooting at normal quality e Number of storable pictures still images Recording length movies in the internal memory and cards p 63 64 Selecting the focusing area amp AF Mode Submenu 2 Application The camera focuses automatically If a face is detected it is shown by a white frame when the shutter button is pressed halfway and the camera focuses the frame turns to green If no face is detected the camera chooses a subject in the frame and focuses automatically Face iESP No The settings will not be changed 28 EN The camera focuses on the Spot subject located within the AF target mark The camera tracks the subject movement automatically to focus on it continuously AF Tracking For some subjects the frame may not appear or may take some time to appear f the frame blinks in red the camera cannot focus Try refocusing on the subject To focus on a moving subject continuously AF Tracking 4 Hold the camera to align the AF target mark on the subject and press the e button 2 When the camera recognizes the subject the AF target mark automatically tracks the subject movement to focus on it continuously 3 To cancel the trac
12. 7 online automated help Monday to Friday ET http www olympusamerica com support http olympusamerica com contactus Phone customer support Tel 1 888 553 4448 Toll free Olympus software updates can be obtained at http Awww olympusamerica com digital OLYMPUS EUROPA HOLDING GMBH Premises Wendenstrasse 14 18 20097 Hamburg Germany Goods delivery Modul H Willi Bleicher Str 36 52353 Duren Germany Tel 49 40 23 77 3 0 Fax 49 40 23 07 61 Letters Postfach 10 49 08 20034 Hamburg Germany European Technical Customer Support Please visit our homepage http www olympus europa com or call our TOLL FREE NUMBER 00800 67 10 83 00 for Austria Belgium Denmark Finland France Germany Italy Luxemburg Netherlands Norway Portugal Spain Sweden Switzerland United Kingdom Please note some mobile phone services providers do not permit access or request an additional prefix to 800 numbers For all European Countries not listed and in case that you can t get connected to the above mentioned number please make use of the following CHARGED NUMBERS 49 180 5 67 10 83 or 49 40 237 73 4899 Our Technical Customer Support is available from 9 am to 6 pm MET Monday to Friday OLYMPUS IMAGING CHINA CO LTD Customer Support 400 650 0303 Homepage http www olympus com cn Customer Service Center A8F Ping An International Financial Center No 1 3 Rm 1605 1608 Guangzhou International Ele
13. The date stamp can not be deleted e When drive settings are set to other than LI Date Stamp cannot be set Ep Camera Menu 2 Shooting larger pictures than when using optical zoom with low degrading of image quality UD Digital Image resolution Zoom bar zoom size zoom WI T On Off 16M a Super resolution zoom W T b 16M T 3 Digital zoom Off On W ZT REED Other 1 W V CE On On 16M Super resolution I zoom Digital zoom EN Due to increased processing of the pixel Super Res Zoom Submenu 2 Application Off Disable super resolution zoom On Enable super resolution zoom e Available only if fff is selected for Image Size 30 EN counts the image quality will not degrade The magnification ratio changes depending on the image size setting e Photographs taken with the zoom bar displayed in red may appear grainy amp Movie Menu Selecting the image size for movies Image Size Frame Rate Submenu 1 Submenu 2 720P Image Size 1280x720 VGA 640x480 30fps Frame Rate 15fps Application Select the image quality based on the image size and frame rate Higher frame rates provide smoother movie images Recording sound when shooting movies 4 Submenu 2 Application Off No sound is recorded On Sound is recorded frames per second e Number of storable pictures sti
14. for any loss resulting from delay in repair is excluded Notes 1 This Warranty is in addition to and does not affect the customer s statutory right 2 If you have any queries regarding this Warranty call any of the Olympus authorized service stations listed in the instructions Notes regarding warranty maintenance 1 This Warranty will only be valid if the Warranty Certificate is duly completed by Olympus or the dealer Make sure that your name the name of the dealer the serial number and the year month and date of purchase are all completed 2 Since this Warranty Certificate will not be re issued keep it in a safe place 3 Any request for repair by a customer in same country where the product was purchased shall be subject to the terms of the warranty issued by the Olympus distributor in that country Where the local Olympus distributor does not issue a separate warranty or where the customer is not in the country where the product was purchased the terms of this worldwide warranty shall apply 4 Where applicable this Warranty is valid worldwide The Olympus authorized service stations listed in this Warranty will gladly honor it Please refer to the appended list for the authorized international Olympus service network Disclaimer of Warranty Olympus makes no representations or warranties either expressed or implied by or concerning any content if these written materials or software and in no event shall be liable f
15. for Camera File system DCF Applicable Exif 2 3 Digital Print Order Format DPOF PRINT Image Matching III PictBridge standards Sound with Wave format still pictures Movie AVI Motion JPEG Memory Internal memory SD SDHC SDXC Eye Fi card No of effective pixels 16 000 000 pixels Image pickup device 1 2 3 CCD primary color filter Lens Olympus lens 4 7 to 23 5 mm f2 8 to 6 5 Equivalent to 26 to 130 0 mm on a 35 mm film Photometric system Digital ESP metering spot metering system Shutter speed 2 to 1 2000 sec Shooting range Normal 0 2 m 0 7 ft to oo W 0 6 m 2 0 ft to oo T Super macro 0 05 m 0 2 ft to oo f 8 3 mm fixed mode Monitor 3 0 TFT color LCD display 460 800 dots Connector Multi connector USB connector A V OUT jack Automatic calendar system 2000 up to 2099 66 EN Operating environment Temperature 0 C to 40 C 32 F to 104 F operation 20 C to 60 C 4 F to 140 F storage Humidity 30 to 90 operation 10 96 to 90 storage Power supply One Olympus lithium ion battery LI 50B Dimensions 103 7 mm W x 62 2 mm H x 22 5 mm D 4 1 x 2 4 x 0 9 in excluding protrusions Weight 150 2 g 5 3 oz including battery and card Lithium ion battery LI 50B Product type Lithium ion rechargeable battery Model No LI 50BA LI 50BB Standard voltage DC 3 7 V Standard capacity 9
16. function menu or the setup menu e To view images press the gt button to switch to playback mode e To return to standby mode press the gt button again or press the shutter button halfway down and then release it e Press and hold the gt button while the camera is turned off to start up the camera in the playback mode e In this case pressing the gt button again sets the camera to the standby mode 8 EN Shooting still images Press the ON OFF button to turn on the camera 2 Select the shooting mode p 13 3 Hold the camera and compose the shot d When holding the camera take care not to cover the flash microphone or other important parts with your fingers etc d Take care so that the flash window is not exposed to fingerprints or dirt 4 Press the shutter button halfway down to focus AF target mark Press halfway Shutter Aperture speed value e The camera was unable to focus if the AF target mark flashes red Try focusing again 5 To take the picture gently press the shutter button all the way down while being careful not to shake the camera Press halfway Press fully EN 9 Using the zoom Turning the zoom lever adjusts the shooting range W side T side Image size Zoom bar W T 16M Optical zoom wW y Sr Other r rd t Due to increased processing of the pixel counts the image quality will not degrade The magnification
17. of charge To claim under this warranty the customer must take the product before the end of the applicable national warranty period to the dealer where the product was purchased or any other Olympus service station within the business area of Olympus Europa Holding GmbH as stipulated on the website http www olympus com During the one year period of the World Wide Guarantee the customer may turn the product in at any Olympus service station Please notice that not in all countries such Olympus service station exists 2 The customer shall transport the product to the dealer or Olympus authorized service station at his own risk and shall be responsible for any costs incurred in transporting the product Provisions of Guarantee 1 OLYMPUS IMAGING CORP 2951 Ishikawa machi Hachioji shi Tokyo 192 8507 Japan grants a one year World Wide Guarantee This worldwide Guarantee must be presented at an Olympus authorized repair service station before any repair can be made under conditions of this Guarantee This Guarantee is valid only if the Guarantee Certificate and proof of purchase are presented at the Olympus repair service station Please note that this Guarantee is in addition to and does not affect the customer s legal warranty rights under the applicable national legislation governing the sale of consumer goods mentioned above 2 This Guarantee does not cover the following and the customer will be required to pay repair charg
18. prints With the images with the date Date Wi Selecting Without prints ithout the images without the date Selecting With prints the file name on the File Name With image Without Selecting Without does not print any file name on the image Proceeds E to the This selects a portion of setting the image for printing screen To crop an image F1 D Use the zoom lever to select the size of the cropping frame use A V IP to move the frame and then press the button Cropping frame 2 Use A V to select OK and press the button O If necessary repeat Steps 7 and 8 to select the image to be printed make the detailed settings and set Single Print 10 Press the button EETA MENU Sd Print EN 47 11Use AV to select Print and Print Reservations press the 9 button ius In print reservations the number of prints and date e Printing starts imprint option are saved in the image on the card e When Option Set is selected in All Print This enables easy printing at a printer or print shop mode Print Info screen is displayed supporting DPOF by using only the print reservations e When printing is finished the Print Mode on the card without a computer or a camera Select screen is displayed e Print reservations can be set only for the images stored on the card e DPOF reservations set by another DPOF device cannot be changed by this camera Make change
19. protect switch The SD SDHC SDXC card body has a write protect switch If you set the switch to the LOCK side you will not be able to write to the card delete data or format Return the switch to enable writing Readout recording process of the card During shooting the current memory indicator lights up in red while the camera is writing data Never open the battery card cover or unplug the USB cable This can not only damage the image data but also render the internal memory or card unusable 62 EN Number of storable pictures still images Recording length movies in the internal memory and cards p The figures for the number of storable still pictures and recording length are approximate The actual capacity varies with shooting conditions and the card used Still pictures TT Number of storable pictures serrata 4 7 7 Ky 4608x3456 E 3200x2400 40 O 780 O pO no AR 1920x1440 A co 00 50 70 640x480 The image sizes are the examples when the aspect ratio is set to ER EN 63 Movies Continuous recording length Image Size Frame Rate Internal memory SD SDHC SDXC card 4 GB With sound Without sound With sound Without sound m 30fps 15fps 30fps WIN 640x480 Md 640 15fps e The maximum file size of a single movie is 2 GB regardless of the capacity of the card Increasing the number of pictures that can be taken Either erase unwanted ima
20. ratio changes depending on the image size setting 10 EN Using the flash The flash functions can be selected to best match the shooting conditions 1 Press D Flash Auto a EE P A AY ic i Pai a r WB Adi s ER 1 iu s T 2 Use lt P to select the setting option and press the 69 button to set Option Description The flash fires automatically in SIEUT low light or backlight conditions Pre flashes are emitted to reduce Redeye the occurrence of red eye in your photos The flash fires regardless of the Fill In available light Flash Off The flash does not fire Long Flash Flash reaches a longer distance than Flash Auto Using the self timer After the shutter button is pressed all the way down the picture is taken after a short delay Press V 2 Use ID to select the setting option and press the 69 button to set Option Description S Off The self timer is deactivated The self timer lamp turns on for approx 10 seconds then blinks Sees for approx 2 seconds and then the picture is taken The self timer lamp blinks for 9 2 sec approx 2 seconds and then the picture is taken To cancel the self timer after it starts Press the MENU button EN 11 Shooting screen displays When the shutter button is pressed halfway down Switching the displays No Name Normal Detailed No info
21. resume playback Advancing and rewinding one frame at a time Resuming playback To stop movie playback Press the MENU button e To play back movies on the computer the supplied PC software is recommended For the first use of the supplied PC software connect the camera to the computer then launch the software p 42 22 EN Menu settings In certain shooting modes some functions cannot be set Function menu Setup menu p 26 Function menu 4 Flash 3 Exposure compensation ISO sensitivit Image Size 2 Self timer 4 White balance 6 Drive Aspect Using the function menu 1 Use lt of the arrow pad to display Example Exposure compensation the function menu 2 Use A V ofthe arrow pad to select the function to be set 3 Use IP of the arrow pad to select the setting value and then press the button to enter the setting EN 23 Flash Sets the flash firing method wro Flash Auto The flash fires automatically in low light or backlight conditions Qo Redeye Pre flashes are emitted to reduce the occurrence of red eye in your photos z Fill In The flash fires regardless of the available light amp Flash Off The flash does not fire fos Long Flash Flash reaches a longer distance than Flash Auto Self timer Sets the time after the shutter button is pressed until the picture is taken Oe Off The self timer is deactivated
22. shock etc after purchase of the product d Any defect or damage that occurs due to fire earthquake flood damage thunderbolt other natural disasters environmental pollution and irregular voltage sources e Any defect that occurs due to careless or improper storage such as keeping the product under conditions of high temperature and humidity near insect repellents such as naphthalene or harmful drugs etc improper maintenance etc f Any defect that occurs due to exhausted batteries etc g Any defect that occurs due to sand mud etc entering the inside of the product casing h When this Warranty Certificate is not returned with the product i When any alterations whatsoever are made to the Warranty Certificate regarding the year month and date of purchase the customer s name the dealer s name and the serial number j When proof of purchase is not presented with this Warranty Certificate 76 EN 4 This Warranty applies to the product only the Warranty does not apply to any other accessory equipment such as the case strap lens cap and batteries 5 Olympus sole liability under this warranty shall be limited to repairing or replacing the product and any liability for indirect or consequential loss or damage of any kind incurred or suffered by the customer due to a defect in the product and in particular any loss or damage caused to any film or lenses or other equipment or accessories used with the product or
23. such as on an airplane where the Eye Fi communication is prohibited remove the Eye Fi card from the camera or set Eye Fi to Off e This camera does not support the Eye Fi card s Endless mode Selecting a method for connecting the camera to other devices f USB Connection Submenu 2 Set to select the connection Application Saving the mode when the camera is turned off f Keep amp Settings Submenu 2 Yes Application The shooting mode is saved when the camera is turned off and is reactivated the next time the camera is turned on on The shooting mode is set to P mode when the camera is turned Auto method each time the camera is connected to another device Storage Connect as a card reader As a portable device connect to MTP PC loaded with Windows Vista Windows 7 Windows 8 Print Select when connecting to a PictBridge compatible printer e Select Storage to use the supplied software e Refer to Connecting with a computer p 42 for the connection method with a computer Turning on the camera with the gt button f gt Power On Submenu 2 Application The camera is not turned on To No turn on the camera press the ON OFF button Press and hold the gt button Yes to turn the camera on in the playback mode Selecting the camera sound and its volume f Sound Settings Submenu 2 Sound Type Submenu 3 1 2 3 Application Selec
24. the PC software e For details on installing the PC software refer to p 43 In addition refer to the PC software help guide for details on how to make panorama images 16 EN Viewing images 1 Press the gt button Number of frames Total number of images Ga e Pictures taken using BEAUTY mode are displayed as a group Turn the zoom lever to the T side to play back the image in the group 2 Use lt to select an image Displays O Displays next previous image image e Hold to fast forward and hold lt to reverse e Press the gt button again to return to the shooting Screen To play sound recordings To play sound recorded with an image select the image and press the 9 button e Press A V to adjust volume Index view and close up view Index view enables quick selection of a desired image Close up view up to 10x magnification allows checking of image details Turn the zoom lever 1 Close up view Index view s Da barata RIT 13 02 26 12 30 EN 17 To select an image in index view Use A V 9P to select an image and press the button to display the selected image in single image view To scroll an image in close up view Use A V 1D to move the viewing area Playing back grouped images If the pictures are taken using BEAUTY the images taken are displayed as a group during playback Several operations are available for the grouped images such as e
25. the beach use a cloth soaked in clean water and wrung well Monitor e Wipe gently with a soft cloth Lens Blow dust off the lens with a commercial blower then wipe gently with a lens cleaner d Do not use strong solvents such as benzene or alcohol or chemically treated cloth d Mold may form on the lens surface if the lens is left dirty Battery USB AC adapter e Wipe gently with a soft dry cloth Storage e When storing the camera for extended periods remove the battery USB AC adapter and card and keep in a cool dry place that is well ventilated Periodically insert the battery and test the camera functions d Avoid leaving the camera in places where chemical products are handled since this may result in corrosion Using a separately sold USB AC adapter The USB AC adapter F 3AC sold separately can be used with this camera Do not use any USB AC adapter other than the dedicated one When using F 3AC be sure to use the USB cable included with this camera Do not use any other USB AC adapter with this camera Shooting is not available when using the F 3AC Using a separately sold charger A charger UC 50 sold separately can be used to charge the battery Using your charger and USB AC adapter abroad e The charger and USB AC adapter can be used in most home electrical sources within the range of 100 V to 240 V AC 50 60Hz around the world However depending on the country or area you are
26. the supplied CD in a CD ROM drive e Double click the CD OLYMPUS Setup icon on the desktop e Double click the Setup icon to display the Setup dialog 2 Install OLYMPUS Viewer 3 e Check the system requirements before beginning installation e Click the OLYMPUS Viewer 3 button and follow the on screen instructions to install the software e You can register via Registration in OLYMPUS Viewer 3 Help 44 EN OLYMPUS Viewer 3 Operating Mac OS X v10 5 v10 8 System Intel Core Solo Duo 1 5 GHz or better Processor Core 2 Duo 2 GHz or better required for movies RAM 1 GB or more 2 GB or more recommended xin ae 3 GB or more Drive Space Monitor 1024 x 768 pixels or more Minimum 32 000 colors Settings 16 770 000 colors recommended e Other languages can be selected from the language combo box For information on using the software see online help 3 Copy the camera manual e Click the Camera Instruction Manual button to open the folder containing the camera manuals Copy the manual for your language to the computer Direct printing PictBridge By connecting the camera to a PictBridge compatible printer you can print images directly without using a computer To find out if your printer supports PictBridge refer to the printer s instruction manual e The printing modes paper sizes and other parameters that can be set wit
27. warranty or any other repairs and ii make any internal or external design and or feature changes on or to its products without any liability to incorporate such changes on or to the Products WHAT IS NOT COVERED BY THIS LIMITED WARRANTY Excluded from this limited warranty and not warranted by Olympus in any fashion either express implied or by statute are a products and accessories not manufactured by Olympus and or not bearing the OLYMPUS brand label the warranty coverage for products and accessories of other manufacturers which may be distributed by Olympus is the responsibility of the manufacturers of such products and accessories in accordance with the terms and duration of such manufacturers warranties b any Product which has been disassembled repaired tampered with altered changed or modified by persons other than Olympus s own authorized service personnel unless repair by others is made with the written consent of Olympus c defects or damage to the Products resulting from wear tear misuse abuse negligence sand liquids impact improper storage nonperformance of scheduled operator and maintenance items battery leakage use of non OLYMPUS brand accessories consumables or supplies or use of the Products in combination with non compatible devices d software programs e supplies and consumables including but not limited to lamps ink paper film prints negatives cables and
28. 25 mAh Battery life Approx 300 full charges varies on usage Operating environment Temperature 0 C to 40 C 32 F to 104 F charging USB AC adapter F 2AC Model No F 2AC 2B F 2AC 1C F 2AC 3C F 2AC AC F 2AC 5C F 2AC 1D F 2AC 3D F 2AC 4D F 2AC 5D F 2AC 6D Power requirements AC 100 to 240 V 50 60 Hz Output F 2AC 2B DC 5 V 500 mA F 2AC 1C F 2AC 3C F 2AC 4C F 2AC 5C F 2AC 1 D F 2AC 3D F 2AC 4D F 2AC 5D F 2AC 6D DC5 V 550 mA Operating environment Temperature 0 C to 40 C 32 F to 104 F operation 20 C to 60 C 4 F to 140 F storage Design and specifications subject to change without notice EN 67 SAFETY PRECAUTIONS CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN CAUTION TO REDUCE THE RISK OF ELECTRICAL SHOCK DO NOT REMOVE COVER OR BACK NO USER SERVICEABLE PARTS INSIDE REFER SERVICING TO QUALIFIED OLYMPUS SERVICE PERSONNEL A An exclamation mark enclosed in a triangle alerts you to important operating and maintenance instructions in the documentation provided with the product If the product is used without observing the information given under this symbol serious injury or death may result If the product is used without observing the information given under this symbol injury or death may result If the product is used without observing the information given under this symbol minor personal injury damage to the equipment
29. 3 Press the button after you have selected the area to trim e The edited image is saved as a separate image Adding sound to still images gt 4 Submenu 1 Edit U Submenu 2 D Use lt to select an image and press the button 2 Use the zoom lever to select the size of the cropping frame and use A V IP to move the frame Cropping frame 32 EN D Use lt to select an image 2 Aim the microphone toward the sound source OLYMPUS Microphone 3 Press the button e Recording starts e The camera adds records sound for approx 4 seconds while playing back the image Retouching faces on still images gt Beauty Fix Submenu 1 Edit Beauty Fix Submenu 2 e Depending on the picture the editing may not be effective D Use JP to select an image and press the button 2 Use A V to select a retouching item and press the button 3 To save the image select OK on the review screen and press the 9 button To retouch the image additionally select Beauty Fix e The retouched image is saved as a separate image gt OK t e The Image Size of the retouched image is limited to EM or lower Beauty Fix 4 Select a retouching item and press the button 2 Press the button on the review screen Brightening areas that are dark due to backlight or other reasons gt Shadow Adj Submenu 1 Submenu 2 Edit Shadow Ad
30. A V lt to set M month D day Time hours and minutes and Y M D date order and then press the button e For precise time setting press the button as the time signal strikes 00 seconds 40 EN Choosing home and alternate time zones f World Time e You will not be able to select a time zone using World Time if the camera clock has not first been set using Submenu 2 Submenu 3 Application The time in the home a time zone the time zone selected for ff in submenu 2 Home Alternate The time in the travel destination time gt zone the time zone selected for in submenu 2 tr Select the home time zone fft Select the travel destination time zone In areas where daylight saving time is in effect use A V to turn daylight saving time Summer on When you select a time zone the camera automatically calculates the time difference between the selected zone and the home time zone ffl to display the time in the travel destination time zone gt 2 DES f Settings Menu 3 Registering the settings for Beauty Fix f Beauty Settings e Depending on the picture the editing may not be effective D Use A V to select a retouching setting and press the 69 button 2 Press the shutter button to take a portrait picture e The image is not saved 3 Select a retouching item and press the button 4 Press the
31. ALL OLYMPUS BE RESPONSIBLE FOR SAVING KEEPING OR MAINTAINING ANY IMAGE OR DATA SAVED ON A PRODUCT RECEIVED BY IT FOR SERVICE OR ON ANY FILM CONTAINED WITHIN A PRODUCT RECEIVED BY IT FOR SERVICE NOR SHALL OLYMPUS BE RESPONSIBLE FOR ANY DAMAGES IN THE EVENT ANY IMAGE OR DATA IS LOST OR IMPAIRED WHILE SERVICE IS BEING PERFORMED INCLUDING WITHOUT LIMITATION DIRECT INDIRECT INCIDENTAL CONSEQUENTIAL OR SPECIAL DAMAGES LOSS OF PROFITS OR LOSS OF USE WHETHER OR NOT OLYMPUS SHALL BE OR SHOULD BE AWARE OF THE POSSIBILITY OF SUCH POTENTIAL LOSS OR IMPAIRMENT Package the Product carefully using ample padding material to prevent damage in transit and either deliver it to the Authorized Olympus Dealer that sold you the Product or ship it postage prepaid and insured to any of our Olympus Service Centers When returning Products for service your package should include the following 1 Sales receipt showing date and place of purchase 2 Copy of this limited warranty bearing the Product serial number corresponding to the serial number on the Product unless it is a model on which Olympus does not place and record serial numbers 3 A detailed description of the problem 74 EN 4 Sample prints negatives digital prints or files on disk if available and related to the problem When service is completed the Product will be returned to you postage prepaid WHERE TO SEND PRODUCT FOR SERVICE See WORLDWIDE WARRANTY for the near
32. Computer Windows Vista Windows 7 from the start menu Double click the CD ROM OLYMPUS Setup icon to open the OLYMPUS Setup window and then double click Launcher exe d If a User Account Control dialog is displayed click Yes or Continue 2 Register your Olympus product e Click the Registration button and follow the on screen instructions e To register the camera must be connected to the computer Connecting the camera p 42 e f nothing is displayed on the camera screen even after connecting the camera to the computer the battery may be exhausted Charge the battery and then connect the camera again 3 Install OLYMPUS Viewer 3 e Check the system requirements before beginning installation e Click the OLYMPUS Viewer 3 button and follow the on screen instructions to install the software OLYMPUS Viewer 3 Obafali Windows XP Service Pack 2 or later E 9 Windows Vista Windows 7 y Windows 8 Pentium 4 1 3 GHz or better Core 2 Processor Duo 2 13 GHz or better required for movies 1 GB or more RAM 2 GB or more recommended ee Hard 3 GB or more Drive Space Monitor 1024 x 768 pixels or more Settinas Minimum 65 536 colors g 16 770 000 colors recommended e See online help for information on using the software EN 43 4 Install the camera manual e Click the Camera Instruction Manual button and follow the on screen instructions Macintosh 1 Insert
33. E ee BEAUTY Lm e MH es Sel timer si timer Ex DI E compensation White balance __ balance Y Iv Ii v EN CTI T RUE ee UN Un ERN ve 1 v v lv ImageSize wv vr v 1 5 Y Aset v Y vY IV IV l v i Compression VW v Y Y Y v 1 Y lAFMde j vY vY DigtalZom y v Y AFllumima w v vv Y Y Y conGude v Y Y Y Y Y Uv DateStamp wv Y v vY Y Y Super ResZoom yv 1 Some functions cannot be set EN 57 List of SCN settings icon Guide pv v vyv v v v tv lv Vv DateStamp v v vY v v v v v IV Ii Super ResZoom J 1 Some functions cannot be set 58 EN zom 0 v v vlvlv compensation 1 Some functions cannot be set EN 59 List of MAGIC settings Exe ft com pensation eneben NL wf a ao ImageSize wv wv v v Sparke Watercolor Reflection en BE e White balance Lowe y y yvy ImmgeSze 1 v v v 1 Some functions cannot be set 60 EN Appendix Camera care Exterior Wipe gently with a soft cloth If the camera is very dirty soak the cloth in mild soapy water and wring well Wipe the camera with the damp cloth and then dry it with a dry cloth If you have used the camera at
34. Handling the Camera AN WARNING Do not use the camera near flammable or explosive gases Do not use the flash and LED including AF illuminator on people infants small children etc at close range You must be at least 1 m 3 ft away from the faces of your subjects Firing the flash too close to the subject s eyes could cause a momentary loss of vision Keep young children infants and animals such as pets away from the camera Always use and store the camera out of the reach of young children and infants to prevent the following dangerous situations which could cause serious injury Becoming entangled in the camera strap causing strangulation Accidentally swallowing the battery cards or other small parts e Accidentally firing the flash into their own eyes or those of another child e Accidentally being injured by the moving parts of the camera Do not look at the sun or strong lights with the camera Do not use or store the camera in dusty or humid places Do not cover the flash with a hand while firing Use SD SDHC SDXC memory cards or Eye Fi cards only Never use other types of cards If you accidently insert another type of card into the camera contact an authorized distributor or service center Do not try to remove the card by force If you find that the USB AC adapter is extremely hot or notice any unusual odors noise or smoke around it unplug the power plug from wall outlet i
35. NT OR FROM ANY OTHER CAUSE WHETHER LIABILITY IS ASSERTED IN CONTRACT TORT INCLUDING NEGLIGENCE AND STRICT PRODUCT LIABILITY OR OTHERWISE IN NO EVENT SHALL OLYMPUS BE LIABLE FOR ANY INDIRECT INCIDENTAL CONSEQUENTIAL OR SPECIAL DAMAGES OF ANY KIND INCLUDING WITHOUT LIMITATION LOSS OF PROFITS OR LOSS OF USE WHETHER OR NOT OLYMPUS SHALL BE OR SHOULD BE AWARE OF THE POSSIBILITY OF SUCH POTENTIAL LOSS OR DAMAGE EN 73 Representations and warranties made by any person including but not limited to dealers representatives salespersons or agents of Olympus which are inconsistent or in conflict with or in addition to the terms of this limited warranty shall not be binding upon Olympus unless reduced to writing and approved by an expressly authorized officer of Olympus This limited warranty is the complete and exclusive statement of warranty which Olympus agrees to provide with respect to the Products and it shall supersede all prior and contemporaneous oral or written agreements understandings proposals and communications pertaining to the subject matter hereof This limited warranty is exclusively for the benefit of the original customer and cannot be transferred or assigned WHAT TO DO WHEN SERVICE IS NEEDED The customer must transfer any image or other data saved on a Product to another image or data storage medium and or remove any film from the Product prior to sending the Product to Olympus for service IN NO EVENT SH
36. OLYMPUS DIGITAL CAMERA VG 190 D 780 Instruction Manual e Thank you for purchasing an Olympus digital camera Before you start to use your new camera please read these instructions carefully to enjoy optimum performance and a longer service life Keep this manual in a safe place for future reference e We recommend that you take test shots to get accustomed to your camera before taking important photographs e In the interest of continually improving products Olympus reserves the right to update or modify information contained in this manual Checking the contents of the box K P A G Digital camera Strap Lithium lon USB AC adapter USB cable OLYMPUS Battery LI 50B F 2AC CB USB7 Setup CD ROM Other accessories not shown Warranty card Contents may vary depending on purchase location Names of Parts 1 Connector cover 2 Strap eyelet 3 Multi connector 4 Self timer lamp AF illuminator 5 Flash 6 Lens 7 Microphone 8 Speaker 9 Tripod socket 10 Battery card cover 2 EN ee ee Arrow pad V down D AY AD instruct to press the up down left right arrow pad ON OFF button Shutter button Monitor Zoom lever button shooting movies Indicator lamp gt button switching between shooting and playback button OK Arrow pad INFO changing information display D erase amp flash D X self timer V 10 MENU button OO NOURWNE Attaching th
37. able copyright laws Olympus assumes no responsibility for unauthorized photographing use or other acts that infringe upon the rights of copyright owners Copyright Notice All rights reserved No part of these written materials or this software may be reproduced or used in any form or by any means electronic or mechanical including photocopying and recording or the use of any type of information storage and retrieval system without the prior written permission of Olympus No liability is assumed with respect to the use of the information contained in these written materials or software or for damages resulting from the use of the information contained therein Olympus reserves the right to alter the features and contents of this publication or software without obligation or advance notice FCC Notice e Radio and Television Interference Changes or modifications not expressly approved by the manufacturer may void the user s authority to operate this equipment This equipment has been tested and found to comply with the limits for a Class B digital device pursuant to Part 15 of the FCC Rules These limits are designed to provide reasonable protection against harmful interference in a residential installation This equipment generates uses and can radiate radio frequency energy and if not installed and used in accordance with the instructions may cause harmful interference to radio communications However there is no guarante
38. ain to cancel the settings 3 If necessary repeat Steps 1 and 2 to make settings for other images and press the MENU button e Only JPEG files can be ordered e For details on OLYMPUS Viewer 3 refer to Installing the PC software and registering user p 43 e For details on uploading images refer to OLYMPUS Viewer 3 Help EN 35 f Settings Menu 1 Erasing data completely f Memory Format f Format e Before formatting check that no important data is left in the internal memory or card e Cards must be formatted with this camera before first use or after being used with other cameras or computers e Be sure to remove the card before formatting the internal memory Submenu 2 Application Completely erases the image data Yes in the internal memory or card including protected images No Cancels formatting Copying images in the internal memory to the card f Backup Submenu 2 Application Backs up image data in the Yes internal memory to the card No Cancels the backup 36 EN Using an Eye Fi card f Eye Fi Submenu 2 Application All Transfers all images Sel Image Transfers only selected image Off Disable Eye Fi communication e When using an Eye Fi card read the Eye Fi card instruction manual carefully and comply with the instructions e Use the Eye Fi card in compliance with the laws and regulations of the country where the camera is used e In locations
39. amera toward a piece of white paper or other white object and press the MENU button e The camera releases the shutter and the white balance is registered When the white balance was previously registered the registered data is updated e The registered white balance data will not be cleared by turning off the power e Perform this procedure under the light where the pictures will be actually taken e When the camera settings are changed the white balance must be registered again e When the white balance cannot be registered check that the white paper fills the screen and then perform the procedure again EN 25 Setup menu Camera Menu 1 Reset Compression AF Mode Digital Zoom AF Illuminat Icon Guide Date Stamp Normal Face iESP 4 Playback Menu Slideshow Edit Erase Print Order Protect Upload Order gt D Camera Menu 1 8 Settings Menu 1 Reset Memory Format Format Compression Backup AF Mode Eye Fi gy Digital Zoom f USB Connection AF Illuminat gt Power On Icon Guide Keep gy Settings Date Stamp Sound Settings 2 Camera Menu 2 Settings Menu 2 i amp Movie sound recording Super Res Zoom Pixel Mapping IO Monitor NTSC PAL eo f Power Save J Language Date time World Time 83 Movie Menu 7 Settings Menu 3 Image Size Beauty Settings Frame Rate IS Movie Mode 26 EN Using the setup menu
40. attery level warning The Olympus lithium ion battery is designed to be used only for the Olympus digital camera Do not use the battery to other devices f the battery s terminals get wet or greasy camera contact failure may result Wipe the battery well with a dry cloth before use Always charge a battery when using it for the first time or if it has not been used for a long period When operating the camera with battery power at low temperatures try to keep the camera and spare battery as warm as possible A battery that has run down at low temperatures may be restored after it is warmed at room temperature e Before going on a long trip and especially before traveling abroad purchase extra batteries A recommended battery may be difficult to obtain while traveling Please recycle batteries to help save our planet s resources When you throw away dead batteries be sure to cover their terminals and always observe local laws and regulations USB AC adapter e The included USB AC adapter F 2AC is designed to be used only with this camera Other cameras cannot be charged with this USB AC adapter Do not connect the included USB AC adapter F 2AC to equipment other than this camera For plug in type USB AC adapter The included USB AC adapter F 2AC is intended to be correctly orientated in a vertical or floor mount position Use Only Dedicated Rechargeable Battery Battery Charger and USB AC adapter We stron
41. batteries and or f Products which do not contain a validly placed and recorded Olympus serial number unless they are a model on which Olympus does not place and record serial numbers EXCEPT FOR THE LIMITED WARRANTY SET FORTH ABOVE OLYMPUS MAKES NO AND DISCLAIMS ALL OTHER REPRESENTATIONS GUARANTIES CONDITIONS AND WARRANTIES CONCERNING THE PRODUCTS WHETHER DIRECT OR INDIRECT EXPRESS OR IMPLIED OR ARISING UNDER ANY STATUTE ORDINANCE COMMERCIAL USAGE OR OTHERWISE INCLUDING BUT NOT LIMITED TO ANY WARRANTY OR REPRESENTATION AS TO THE SUITABILITY DURABILITY DESIGN OPERATION OR CONDITON OF THE PRODUCTS OR ANY PART THEREOF OR THE MERCHANTABILITY OF THE PRODUCTS OR THEIR FITNESS FOR A PARTICULAR PURPOSE OR RELATING TO THE INFRINGEMENT OF ANY PATENT COPYRIGHT OR OTHER PROPRIETARY RIGHT USED OR INCLUDED THEREIN IF ANY IMPLIED WARRANTIES APPLY AS A MATTER OF LAW THEY ARE LIMITED IN DURATION TO THE LENGTH OF THIS LIMITED WARRANT Y SOME STATES MAY NOT RECOGNIZE A DISCLAIMER OR LIMITATION OF WARRANTIES AND OR LIMITATION OF LIABILITY SO THE ABOVE DISCLAIMERS AND EXCLUSIONS MAY NOT APPLY THE CUSTOMER MAY ALSO HAVE DIFFERENT AND OR ADDITIONAL RIGHTS AND REMEDIES THAT VARY FROM STATE TO STATE THE CUSTOMER ACKNOWLEDGES AND AGREES THAT OLYMPUS SHALL NOT BE RESPONSIBLE FOR ANY DAMAGES THAT THE CUSTOMER MAY INCUR FROM DELAYED SHIPMENT PRODUCT FAILURE PRODUCT DESIGN SELECTION OR PRODUCTION IMAGE OR DATA LOSS OR IMPAIRME
42. batteries out of the camera and warm them by putting them in your pocket for a while Card Internal memory An error message is displayed Error message p 52 Shutter button No picture is taken when the shutter button is pressed e Cancel sleep mode To save battery power the camera automatically goes into sleep mode and the monitor turns off if there is no operation for 3 minutes when the camera is turned on No picture is taken even if the shutter button is fully pressed in this mode Operate the zoom lever or other buttons to restore the camera from sleep mode before taking a picture If the camera is left for another 12 minutes it automatically turns off Press the ON OFF button to turn the camera on e Press the gt button to switch to the shooting mode e Wait until flash charge stops blinking before taking pictures Monitor Difficult to see e Condensation may have occurred Turn off the power and wait for the camera body to become acclimated to the surrounding temperature and dry out before taking pictures Vertical lines appear on the monitor e This condition may occur when the camera is pointed at an extremely bright subject under a clear sky and so on The lines may appear on the recorded picture or movie with sequential shots The light is caught in the picture e Shooting with flash in dark situations results in an image with many flash reflections on dust in the air EN 51 Dat
43. camera may be unable to print images taken by other cameras EN 53 Shooting tips When you are unsure of how to take a picture that you envision refer to the information below r1 Focusing Lad EI Focusing on the subject e Taking a picture of a subject not in the center of the monitor After focusing on an object at the same distance as the subject compose the shot and take the picture Pressing the shutter button halfway p 9 Set AF Mode p 28 to Face iESP Taking a picture in AF Tracking mode p 28 The camera tracks the subject movement automatically to focus on it continuously Taking a picture of a shadowy subject Using the AF illuminator makes focusing easier AF Illuminat p 29 e Taking a picture of subjects where autofocus is difficult In the following cases after focusing on an object by pressing the shutter button halfway down with high contrast at the same distance as the subject compose the shot and take the picture Subjects with low contrast 54 EN When extremely bright objects appear in the center of the monitor Object with no vertical lines Itis also effective to compose the shot by holding the camera vertically to focus and then returning to the horizontal position to take the picture When objects are at different distances Fast moving object The subject is not in the center of the frame Camera shake 9 Taking pictures wit
44. cteristics the unevenness of the color or brightness may also be found depending on the angle but this is due to the structure of the monitor This is not a malfunction Legal and Other Notices Olympus makes no representations or warranties regarding any damages or benefit expected by using this unit lawfully or any request from a third person which are caused by the inappropriate use of this product Olympus makes no representations or warranties regarding any damages or any benefit expected by using this unit lawfully which are caused by erasing picture data Disclaimer of Warranty e Olympus makes no representations or warranties either expressed or implied by or concerning any content of these written materials or software and in no event shall be liable for any implied warranty of merchantability or fitness for any particular purpose or for any consequential incidental or indirect damages including but not limited to damages for loss of business profits business interruption and loss of business information arising from the use or inability to use these written materials or software or equipment Some countries do not allow the exclusion or limitation of liability for consequential or incidental damages or of the implied warranty so the above limitations may not apply to you e Olympus reserves all rights to this manual EN 71 Warning Unauthorized photographing or use of copyrighted material may violate applic
45. ctronic tower No403 Xinyuan South Road Chaoyang District Beijing Huan Shi East Road Guang Zhou Tel 86 10 58199199 Fax 86 10 59761360 Zip 100027 Tel 86 20 61227111 Fax 86 20 61227120 Zip 510095 A 32F Shanghai Industrial Investment Building 18 16F Huamin Hanzun Internation Plaza No 1 Fuxing Street Cao Xi Road N Xuhui District Shanghai Chengdu Tel 86 21 60823500 Fax 86 21 60823100 Zip 200030 Tel 86 28 86703531 Fax 86 28 86703532 Zip 610016 OLYMPUS HONG KONG AND CHINA LIMITED Digital Camera Repair Centre L4207 Office Tower Langham Place 8 Argyle Street Mongkok Kowloon Hong Kong Customer Hotline 852 2376 2150 Fax 852 2375 0630 http www olympus com hk 2013 OLYMPUS IMAGING CORP VM800901
46. ctures by selecting white balance p 24 Best results in most environments can normally be obtained with the WB Auto setting but for some subjects you should try experimenting with different settings This is especially true for sunshade under a clear Sky mixed natural and artificial light settings and so on EN 55 Image quality 33 Taking sharper pictures e Taking pictures with the optical zoom or super resolution zoom Avoid using digital zoom p 29 to take pictures e Taking pictures at a low ISO sensitivity If the picture is taken with a high ISO sensitivity noise small colored spots and color unevenness that were not in the original image can occur and the image can appear grainy ISO sensitivity p 24 Batteries Making batteries last longer e Set Power Save p 40 to On 56 EN Playback Editing tips Playback Playing images in the internal memory and card e Remove the card and display the images in internal memory Inserting and removing the battery and card commercially available p 4 Lm if Editing do Erasing the sound recorded to a still image e Record over the sound with silence when playing back the image Adding sound to still images gt amp p 32 List of settings available in each shooting mode For details on SCN refer to List of SCN settings p 58 For details on shaded areas refer to List of MAGIC settings p 60
47. e even for defects occurring within the Guarantee period referred to above a Any defect that occurs due to mishandling such as an operation performed that is not mentioned in the Handling Care or other sections of the instructions etc b Any defect that occurs due to repair modification cleaning etc performed by anyone other than Olympus or an Olympus authorized service station c Any defect or damage that occurs due to transport a fall shock etc after purchase of the product d Any defect or damage that occurs due to fire earthquake flood damage thunderbolt other natural disasters environmental pollution and irregular voltage sources e Any defect that occurs due to careless or improper storage such as keeping the product under conditions of high temperature and humidity near insect repellents such as naphthalene or harmful drugs etc improper maintenance etc f Any defect that occurs due to exhausted batteries etc g Any defect that occurs due to sand mud etc entering the inside of the product casing h When the Guarantee Certificate is not returned with the product i When any alterations whatsoever are made to the Guarantee Certificate regarding the year month and date of purchase the customer s name the dealer s name and the serial number j When proof of purchase is not presented with this Guarantee Certificate 3 This Guarantee applies to the product only the Guarantee does not ap
48. e and time function Date and time settings return to the default setting e f the batteries are removed and left out of the camera for about 1 days the date and time settings return to the default setting and must be reset The time until the date and time settings return to the default setting varies depending on how long the batteries have been loaded Turning on the camera and making the initial settings p 7 Miscellaneous The camera makes a noise when taking pictures e The camera may activate the lens and make a noise even if no operation is performed This is because the camera automatically performs actions of auto focus as far as it is ready to shoot 52 EN Error message e When one of the messages below is displayed on the monitor check the corrective action Corrective action Error message 1 Card problem Card Error Insert a new card D Card problem The card write protect switch is set to the LOCK side Release Write Protect the switch 1 Memory Full 1 Card problem Replace the card Erase unwanted images Internal memory problem Insert a card Erase unwanted images Card Full Card problem Use A V to select Format and press the button Next use A V to select Yes and press the button Internal memory problem Use A V to select Memory Format and press the button Next use A V to select Yes and pres
49. e camera strap a d Pull the strap tight so that it does not come loose N EN Inserting and removing the battery and card commercially available 1 Follow Steps and 2 to open the battery card cover Battery card cover T Turn off the camera before opening the battery card cover 2 Insert the battery while sliding the battery lock knob in the direction of the arrow 4 EN n Insert the battery as illustrated with the mark toward the battery lock knob Damage to the battery exterior scratches etc may produce heat or an explosion 5 N Slide the battery lock knob in the direction of the arrow to unlock and then remove the battery 3 Insert the card straight until it clicks into place Always use SD SDHC SDXC cards or Eye Fi card with this camera Do not insert other types of memory cards Using the card p 62 e Do not touch the metallic parts of the card directly To remove the card Press the card in until it clicks and comes out slightly then remove the card 4 Follow Steps and 2 to close the battery card cover When using the camera be sure to close the battery card cover Charging the battery Connect the USB cable and USB AC adapter to the camera and charge the battery For charging the battery abroad see Using your charger and USB AC adapter abroad p 61 e The battery is not ful
50. e that interference will not occur in a particular installation If this equipment does cause harmful interference to radio or television reception which can be determined by turning the equipment off and on the user is encouraged to try to correct the interference by one or more of the following measures e Adjust or relocate the receiving antenna Increase the distance between the camera and receiver Connect the equipment to an outlet on a circuit different from that to which the receiver is connected Consult your dealer or an experienced radio TV technician for help Only the OLYMPUS supplied USB cable should be used to connect the camera to USB enabled personal computers PC Any unauthorized changes or modifications to this equipment would void the user s authority to operate it 72 EN For customers in North and South America For customers in USA Declaration of Conformity Model Number VG 190 D 780 Trade Name OLYMPUS Responsible Party OLYMPUS IMAGING AMERICA INC 3500 Corporate Parkway P O Box 610 Center Valley PA 18034 0610 U S A Telephone Number 484 896 5000 Tested To Comply With FCC Standards FOR HOME OR OFFICE USE This device complies with Part 15 of the FCC rules Operation is subject to the following two conditions 1 This device may not cause harmful interference 2 This device must accept any interference received including interference that may cause undesired operation Addres
51. ed SCN SCN mode You can shoot with the best mode for the subject and shooting scene The best shooting settings for various scenes are pre programmed as submodes Note that functions may be limited in some modes Refer to the descriptions displayed on the submode selection screen and select the desired submode MAGIC MAGIC mode You can shoot with special effects Refer to the sample images displayed on the submode selection screen and select the desired submode The best shooting settings for each effect are pre programmed so some function settings cannot be changed e Note that some effects may not be applied to movies A Panorama mode You can shoot and combine multiple images to create an image with a wide angle of view panoramic image D Use A V 1D to specify at which edge the next picture is to be connected and then press the button Direction for combining frames EN 15 2 Press the shutter button to take the first frame The edge of the first frame is displayed faintly on the screen 3 Compose the next shot so that the edge of the first frame displayed faintly on the screen overlaps the subject of the second frame and press the shutter button 4 Repeat step until the desired number of frames are taken and then press the v9 button or MENU button when finished Panorama shooting is possible for up to 10 frames The shot images are combined into a single panorama image by
52. est service center INTERNATIONAL WARRANTY SERVICE International warranty service is available under this warranty For customers in Europe CE mark indicates that this product complies with the European requirements for safety health environment and customer protection CE mark cameras are intended for sales in Europe This symbol crossed out wheeled bin WEEE Annex IV indicates separate collection of waste electrical and electronic equipment in the EU countries Please do not throw the equipment into the domestic refuse Please use the return and collection systems available in your country for the disposal of this product This symbol crossed out wheeled bin Directive 2006 66 EC Annex II indicates separate collection of waste batteries in the EU countries Please do not throw the batteries into the domestic refuse Please use the return and collection systems available in your country for the disposal of the waste batteries Provisions of warranty 1 If this product proves to be defective although it has been used properly in accordance with the written Handling Care and Operating instructions supplied with it during the applicable national warranty period and has been purchased from an authorized Olympus distributor within the business area of Olympus Europa Holding GmbH as stipulated on the website http www olympus com this product will be repaired or at Olympus s option replaced free
53. ges or connect the camera to a computer or other device to save the images and then erase the images in the internal memory or card Erase p 20 34 Sel Image p 34 All Erase p 35 Memory Format Format p 36 64 EN Trademarks Microsoft and Windows are registered trademarks of Microsoft Corporation Macintosh is a trademark of Apple Inc SDXC Logo is a trademark of SD 3C LLC Eye Fi is a registered trademark of Eye Fi Inc Powered by ARCSOFT All other company and product names are registered trademarks and or trademarks of their respective owners The software in this camera may include third party software Any third party software is subject to the terms and conditions imposed by the owners or licensors of that software under which software is provided to you Those terms and other third party software notices if any may be found in the software notice PDF file stored within the supplied CD ROM or at http www olympus co jp en support imsg digicamera download notice notice cfm e The standards for camera file systems referred to in this manual are the Design rule for Camera File system DCF standards stipulated by the Japan Electronics and Information Technology Industries Association JEITA EN 65 SPECIFICATIONS Camera Product type Digital camera for shooting and displaying Recording system Still pictures Digital recording JPEG in accordance with Design rule
54. gly recommend that you use only the genuine Olympus dedicated rechargeable battery battery charger and USB AC adapter with this camera Using a non genuine rechargeable battery battery charger and or USB AC adapter may result in fire or personal injury due to leakage heating ignition or damage to the battery Olympus does not assume any liability for accidents or damage that may result from the use of a battery battery charger and or USB AC adapter that are not genuine Olympus accessories Monitor Do not push the monitor forcibly otherwise the image may become vague resulting in a playback mode failure or damage to the monitor A strip of light may appear on the top bottom of the monitor but this is not a malfunction When a subject is viewed diagonally in the camera the edges may appear zigzagged on the monitor This is not a malfunction it will be less noticeable in playback mode In places subject to low temperatures the monitor may take a long time to turn on or its color may change temporarily When using the camera in extremely cold places it is a good idea to occasionally place it in a warm place The monitor exhibiting poor performance due to low temperatures will recover in normal temperatures The monitor of this product is manufactured with high quality accuracy however there may be a stuck or dead pixel on the monitor These pixels do not have any influence on the image to be saved Because of the chara
55. h the affected area with clean running cold water immediately If the fluid burns your skin seek medical attention immediately Never subject batteries to strong shocks or continuous vibration by dropping or hitting This may cause exploding overheating or burning AN CAUTION e Before loading always inspect the battery carefully for leaks discoloration warping or any other abnormality The battery may become hot during prolonged use To avoid minor burns do not remove it immediately after using the camera e Always unload the battery from the camera before storing the camera for a long period Leaking and overheating may cause fire injury or malfunction When storing the battery for a long period select a cool location for storage This camera uses one Olympus lithium ion battery Use the designated battery There is a risk of explosion if the battery is replaced with the incorrect battery type Power consumption by the camera varies depending on which functions are used e During the conditions described below power is consumed continuously and the battery becomes exhausted quickly e The zoom is used repeatedly e The shutter button is pressed halfway repeatedly in shooting mode activating the auto focus A picture is displayed on the monitor for an extended period of time The camera is connected to a printer Using an exhausted battery may cause the camera to turn off without displaying the b
56. h the camera vary depending on the printer that is used For details refer to the printer s instruction manual e For details on the available paper types loading paper and installing ink cassettes refer to the printer s instruction manual e In the setup menu set USB Connection to Print USB Connection p 37 Printing images at the printer s standard settings Easy Print 1 Display the image to be printed on the monitor e Viewing images p 17 2 Turn on the printer and then connect the printer and camera USB cable supplied 3 Press to start printing 4 To print another image use lt gt _ to select an image and press the button To exit printing After a selected image is displayed on the screen disconnect the USB cable from the camera and printer EN 45 Changing the printer s settings for printing Custom Print 1 Display the image to be printed on the monitor e Viewing images p 17 2 Turn on the printer and then connect the printer and camera 3 Press the button 4 Use A V to select the print mode and press the button 5 Use A V to select Size Submenu 3 and press gt e f the Printpaper screen is not displayed the Size Borderless and Pics Sheet are set to the printer s standard Printpaper Te MENU Size Borderless a E E E 6 Use A V to select the
57. hout camera shake e Taking pictures using ijj p 14 e Shooting movies using IS Movie Mode p 31 e Select amp Sport in the scene mode p 13 The N Sport mode uses a fast shutter speed and can reduce the blur incurred by a moving subject e Taking pictures at a high ISO sensitivity If a high ISO sensitivity is selected pictures can be taken at a high shutter speed even at locations where a flash cannot be used SO sensitivity p 24 Exposure brightness 2 54 Taking pictures with the right brightness e Taking pictures using Face iESP p 28 Appropriate exposure is obtained for a face against backlight and the face is brightened e Taking pictures using Fill In p 24 flash A subject against backlight is brightened e Taking pictures of a white beach or snow scene Select F Beach amp Snow in the scene mode p 13 e Taking pictures using exposure compensation p 24 Adjust the brightness while viewing the screen for taking the picture Normally taking pictures of white subjects such as snow results in images that are darker than the actual subject Use the exposure compensation to adjust in the positive direction to express whites as they appear When taking pictures of black subjects on the other hand it is effective to adjust in the negative direction LE NR Color hue WU Leo Taking pictures with colors at the same shade as they appear e Taking pi
58. igh precision technology contained in this product never leave the camera in the places listed below no matter if in use or storage Places where temperatures and or humidity are high or go through extreme changes Direct sunlight beaches locked cars or near other heat sources stove radiator etc or humidifiers e In sandy or dusty environments Near flammable items or explosives In wet places such as bathrooms or in the rain When using products with weatherproof designs read their manuals as well e n places prone to strong vibrations Never drop the camera or subject it to severe shocks or vibrations When attaching the camera to or removing it from a tripod rotate the tripod screw not the camera Before transporting the camera remove a tripod and all other non OLYMPUS accessories Do not touch electric contacts on cameras Do not leave the camera pointed directly at the sun This may cause lens or shutter curtain damage color failure ghosting on the image pickup device or may possibly cause fires Do not push or pull severely on the lens Before storing the camera for a long period remove the batteries Select a cool dry location for storage to prevent condensation or mold from forming inside the camera After storage test the camera by turning it on and pressing the shutter button to make sure that it is operating normally EN 69 The camera may malfunction if it is used in a locat
59. in the AC wall outlet may be shaped differently and the charger and USB AC adapter may require a plug adapter to match the wall outlet For details ask at your local electrical shop or travel agent Do not use travel voltage converters as they could damage your charger and USB AC adapter EN 61 Using the card Format Cards must be formatted with this camera before first use or after being used with other cameras or Cards compatible with this camera computers SD SDHC SDXC Eye Fi card commercially available for compatibility card details visit the Checking the image saving location Cilmi Wesley The memory indicator shows whether the internal Dea memory or card is being used during shooting and m playback e This camera can be used without a card by storing Current memory indicator fj Internal memory is being used images in its internal memory B Card is being used e Even if Memory Format Format Erase Eye Fi card Sel Image or All Erase is performed the data in the card is not completely erased When e The Eye Fi card may become hot during use disposing of the card damage the card to e When using an Eye Fi card the battery may run prevent the disclosure of personal data out faster e Switching between a card and internal memory is e When using an Eye Fi card the camera may not available function more slowly When using the internal memory remove the card first SD SDHC SDXC card write
60. ion where it is subject to a magnetic electromagnetic field radio waves or high voltage such as near a TV set microwave video game loud speakers large monitor unit TV radio tower or transmission towers In such cases turn the camera off and remove the battery then reinsert it and turn the camera on again before further operation Always observe the operating environment restrictions described in the camera s manual Battery Handling Precautions Follow these important guidelines to prevent batteries from leaking overheating burning exploding or causing electrical shocks or burns AN DANGER The camera uses a lithium ion battery specified by Olympus Charge the battery with the specified USB AC adapter or charger Do not use any other USB AC adapters or chargers Never incinerate or heat batteries in microwaves on hot plates or in pressure vessels etc Never leave the camera on or near electromagnetic devices This may cause overheating burning or exploding Do not connect terminals with any metallic objects Take precautions when carrying or storing batteries to prevent them from coming into contact with any metal objects such as jewelry pins fasteners keys etc The short circuit may cause overheating exploding or burning which burn or damage you Never store batteries where they will be exposed to direct sunlight or subjected to high temperatures in a hot vehicle near a heat source etc
61. j D Use JP to select an image and press the button e The edited image is saved as a separate image e Depending on the picture the editing may not be effective e The retouching process may lower the image resolution EN 33 Retouching red eyes in flash Erasing images gt Erase shooting gt Redeye Fix Submenu 2 Application Submenu 1 Submenu 2 All images in the internal memory AN Erase or card will be erased Edit Redeye Fix i sarna Images are individually selected D Use lt to select an image and press the g and erased button Erase Deletes the image displayed e The edited image is saved as a separate image e Depending on the picture the editing may not be e When erasing pictures in the internal memory do effective not insert the card into the camera e The retouching process may lower the image e Protected images cannot be erased resolution wn To individually select and erase images Rotating images gt 1 Sel Image D Use A V to select Sel Image and press the Submenu 1 Submenu 2 Con gel P Edit 1 2 Use A V IP to select the image to be erased and press the button to add a mark to the D Use lt I gt to select an image eoe bd 2 Press the button to rotate the image e Turn to the T end to return to the single frame 3 If necessary repeat Steps 1 and 2 to make display settings for other images and press the MENU button Sel Image 1 vs e The ne
62. king press the button e Depending on the subjects or the shooting conditions the camera may be unable to lock the focus or fail to track the subject movement e When the camera fails to track the subject movement the AF target mark changes to red Shooting at higher magnifications than optical zoom Using the assist lamp for shooting a dark subject EX AF Illuminat Submenu 2 Application Off The AF illuminator is not used When the shutter button is pressed halfway down the AF illuminator turns on to aid focusing On D Digital Zoom Submenu 2 Application Off Disable digital zoom On Enable digital zoom e The option selected for Digital Zoom affects the appearance of the zoom bar p 30 AF illuminator EC AN Displaying icon guides 3 Icon Guide Submenu 2 Application Off No icon guide is displayed The explanation of the selected icon will be displayed when a shooting mode or function menu icon is selected position the cursor on the icon for a while to display the explanation Program Auto E Pu W AUTO Functions can be Icon guide changed manually Imprinting the date of recording 3 Date Stamp Submenu 2 Application Off Do not imprint the date Stamp new photographs with the 9 date of recording e When the date and time are not set Date Stamp cannot be set Turning on the camera and making the initial settings p 7 e
63. ll images Recording length movies in the internal memory and cards p 63 64 Reducing the blur caused by the camera shake when shooting IS Movie Mode Submenu 2 Off On Application The image stabilizer is deactivated This is recommended for shooting when the camera is fixed in place on a tripod or other stable surface The image stabilizer is activated e When set to On only the digital zoom can be used during movie recording To record the movie with the optical zoom set movies to Off gt Playback Menu Playing back images automatically gt Slideshow Submenu 2 Submenu 3 Application No background music Off is played BGM E Background music is On played Normal Selects the type of Type Fader transition effect used Zoom between slides Start Starts the slideshow e Images may not be stabilized if camera shake is too severe e During a slideshow press to advance one frame lt to go back one frame EN 37 Changing the image size gt gy This saves a high resolution image as a separate image with a smaller size for use in e mail attachments and other applications Submenu 3 Submenu 1 Submenu 2 D Use lt P to select an image 2 Use A V to select an image size and press the button e The resized image is saved as a separate image Cropping image gt 14 Submenu 1 Submenu 2 Edit Et
64. ly charged at shipment Before use be sure to charge the battery until the indicator lamp turns off up to 4 hours Connecting the camera AC outlet Indicator lamp On Charging Off Charged USB cable supplied EN When to charge the batteries Charge the battery when the error message shown below appears Error message Battery Empty Flashes in red Never use any cable other than supplied or Olympus designated USB cable This may cause smoking or burning d The included F 2AC USB AC adapter hereafter referred to as USB AC adapter differs depending on the region where you purchased the camera If you received a plug in type USB AC adapter plug it directly into AC outlet The included USB AC adapter has been designed to be used for charging and playback Do not take pictures while the USB AC adapter is connected to the camera d Be sure to unplug the power plug of the USB AC adapter from the wall outlet when the charging is complete or the playback ends For details on the battery see Battery Handling Precautions p 70 For details on the USB AC adapter see USB AC adapter p 71 6 EN e f the indicator lamp does not light check the USB cable and USB AC adapter connections e The battery can be charged while the camera is connected to the computer via USB The charging time varies depending on the performance of the computer There may be ca
65. mmediately and stop using it Then contact an authorized distributor or service center AN CAUTION Stop using the camera immediately if you notice any unusual odors noise or smoke around it Never remove the batteries with bare hands which may cause a fire or burn your hands e Never hold or operate the camera with wet hands This may cause overheating exploding burning electrical shocks or malfunctions Do not leave the camera in places where it may be subject to extremely high temperatures Doing so may cause parts to deteriorate and in some circumstances cause the camera to catch fire Do not use the charger or USB AC adapter if it is covered such as a blanket This could cause overheating resulting in fire Handle the camera with care to avoid getting a low temperature burn When the camera contains metal parts overheating can result in a low temperature burn Pay attention to the following When used for a long period the camera will get hot If you hold on to the camera in this state a low temperature burn may be caused In places subject to extremely cold temperatures the temperature of the camera s body may be lower than the environmental temperature If possible wear gloves when handling the camera in cold temperatures Be careful with the strap Be careful with the strap when you carry the camera It could easily catch on stray objects and cause serious damage To protect the h
66. or any implied warranty of merchantability or fitness for any particular purpose or for any consequential incidental or indirect damages including but not limited to damages for loss of business profits business interruption and loss of business information arising from the use of inability to use these written materials or software Some states do not allow the exclusion or limitation of liability for consequential or incidental damages so the above limitations may not apply to you OLYMPUS KOREA CO LTD 10F Olympus Tower A 114 9 Samsung dong Gangnam gu Seoul Korea 135 090 http www olympus co kr Tel 1544 3200 OLYMPUS MALAYSIA Sdn Bhd 10 8 Menara 1 MK Kompleks 1 Mont Kiara No 1 Jalan Kiara Mont Kiara 50480 Kuala Lumpur Malaysia Tel 603 6411 0000 Fax 603 6411 0003 BRANCHES PENANG OFFICE KUCHING OFFICE Suite 3A 6 Level 3A Wisma Great Eastern Level 6 5A 6th Floor Menara MAA No 25 Lebuh Light 10200 Penang Lot 86 Section 53 Tel 604 262 2832 Fax 604 262 5832 Jalan Central Timur 93300 Kuching Sarawak Tel 6082 253 885 Fax 6082 256 885 http www olympus com my OLYMPUS http www olympus com OLYMPUS IMAGING CORP 2951 Ishikawa machi Hachioji shi Tokyo Japan OLYMPUS IMAGING AMERICA INC 3500 Corporate Parkway P O Box 610 Center Valley PA 18034 0610 U S A Tel 484 896 5000 Technical Support USA Our phone customer support is available from 9 am to 9 pm 24
67. or loss of valuable data may result A DANGER A WARNING A CAUTION WARNING TO AVOID THE RISK OF FIRE OR ELECTRICAL SHOCK NEVER DISASSEMBLE EXPOSE THIS PRODUCT TO WATER OR OPERATE IN A HIGH HUMIDITY ENVIRONMENT 68 EN General Precautions Read All Instructions Before you use the product read all operating instructions Save all manuals and documentation for future reference Cleaning Always unplug this product from the wall outlet before cleaning Use only a damp cloth for cleaning Never use any type of liquid or aerosol cleaner or any type of organic solvent to clean this product Attachments For your safety and to avoid damaging the product use only accessories recommended by Olympus Water and Moisture For precautions on products with weatherproof designs read the weatherproofing sections Location To avoid damage to the product mount the product securely on a stable tripod stand or bracket Power Source Connect this product only to the power source described on the product label Lightning If a lightning storm occurs while using a USB AC adapter remove it from the wall outlet immediately Foreign Objects To avoid personal injury never insert a metal object into the product Heat Never use or store this product near any heat source such as a radiator heat register stove or any type of equipment or appliance that generates heat including stereo amplifiers
68. ply to any other accessory equipment such as the case strap lens cap and batteries 4 Olympus s sole liability under this Guarantee shall be limited to repairing or replacing the product Any liability under the Guarantee for indirect or consequential loss or damage of any kind incurred or suffered by the customer due to a defect of the product and in particular any loss or damage caused to any lenses films other equipment or accessories used with the product or for any loss resulting from a delay in repair or loss of data is excluded Compelling regulations by law remain unaffected by this Notes regarding Guarantee maintenance 1 This Guarantee will only be valid if the Guarantee Certificate is duly completed by Olympus or an authorized dealer or other documents contain sufficient proof Therefore please make sure that your name the name of the dealer the serial number and the year month and date of purchase are all completed or the original invoice or the sales receipt indicating the dealer s name the date of purchase and product type is attached to this Guarantee Certificate Olympus reserves the right to refuse free of charge service if neither Guarantee Certificate is completed nor the above document is attached or if the information contained in it is incomplete or illegible 2 Since this Guarantee Certificate will not be re issued keep it in a safe place Please refer to the list on the web site http www
69. rait cn ej Ales Icon indicating the submode that is set EN 13 Learning about the shooting modes P P mode The camera will select the appropriate aperture value and shutter speed for the subject Changes can also be made to various shooting settings such as exposure compensation as needed AUTO iAUTO Mode The camera will automatically select the optimal shooting mode for the scene The shooting condition is decided by the camera and settings cannot be changed excepting some functions di DIS mode This mode enables the user to reduce blur that is caused by camera shake and subject movement 14 EN BEAUTY BEAUTY mode You can shoot with Beauty Fix effects Point the camera toward the subject Check the frame appearing around the face detected by the camera and then press the shutter button to take the picture 2 To save the image select OK on the review screen and press the button To retouch the image additionally select Beauty Fix Beauty Fix D Use A V IP to select a retouching item and press the 69 button 2 Check the retouched effects on the review screen then press the 9 button to start the retouch process and save e Settings for Beauty Fix can be registered e Depending on the picture the editing may not be effective amp Super Macro mode This enables shooting as close as 5 cm 2 in to the subject The zoom position is lock
70. s For customers in CANADA This Class B digital apparatus complies with Canadian ICES 003 OLYMPUS WORLDWIDE LIMITED WARRANTY IMAGING PRODUCTS Olympus warrants that the enclosed Olympus imaging product s and related Olympus accessories individually a Product and collectively the Products will be free from defects in materials and workmanship under normal use and service for a period of one 1 year from the date of purchase If any Product proves to be defective within the one year warranty period the customer must return the defective Product to any of Olympus Service Centers following the procedure set forth below See WHAT TO DO WHEN SERVICE IS NEEDED Olympus at its sole discretion will repair replace or adjust the defective Product provided that Olympus investigation and factory inspection disclose that a such defect developed under normal and proper use and b the Product is covered under this limited warranty Repair replacement or adjustment of defective Products shall be Olympus s sole obligation and the customer s sole remedy hereunder The customer is liable and shall pay for shipment of the Products to the Olympus Service Center Olympus shall not be obligated to perform preventive maintenance installation deinstallation or maintenance Olympus reserves the right to i use reconditioned refurbished and or serviceable used parts that meet Olympus s quality assurance standards for
71. s an de using the original device Making new DPOF paid reservations with this camera will erase the All Index A reservations made by the other device Print Order e DPOF print reservations can be made for up to 999 images per card Print Mode Select To cancel printing 4 Press the MENU button while Do Not Remove Single frame p rint reservations USB Cable is displayed 4 2 Select Cancel using A V and then press the button 1 Display the setup menu 12 Press the MENU button s Using the Setup ment PA 13 When the message Remove USB 2 From the playback menu gt Cable is displayed disconnect select Print Order and then the USB cable from the camera press the button and printer 48 EN 3 Use A V to select L1 and press the 9 button Print Order Tata OK 4 30 2 Norm 4608x3456 j 100 0004 F 13 02 26 12 30 4 Use lt to select the image for print reservation Use A V to select the quantity Press the button 5 Use A V to select the date print screen option and press the 9 button Submenu 2 Application No This prints the image only This prints the image with the Dale shooting date Time This prints the image with the shooting time 6 Use A V to select Set and press the 9 button Reserving one print each of all images on the card 4 1 Follow Steps 1 and 2 in O p 48 2 Use A V to select 4 and press the 99 button
72. s the button 7 Before erasing important images download them to a computer All data will be erased Error message Corrective action Error message Corrective action No Picture Internal memory Card problem Take pictures before viewing them t Picture Error t Problem with selected image Use photo retouch software etc to view the image on a computer If the image still cannot be viewed the image file is corrupted Problem with selected image No Connection The Image Use photo retouch software etc Cannot Be to edit the image on a computer Edited D Battery problem Battery Empty Charge the battery C Connection problem 9X Connect the camera and computer or printer correctly Printer problem Load paper into the printer Settings Changed No Paper Printer problem No Ink Refill the ink in the printer e Printer problem Jammad Remove the jammed paper Printer problem Return to the status where the printer can be used ch Print Error Printer problem Turn off the camera and printer check the printer for any problems and then turn the power on again t Cannot Print Problem with selected image Use a computer to print 3 This is displayed for instance when the printer s paper tray has been removed Do not operate the printer while making the print settings on the camera This
73. ses in which it takes approx 10 hours Turning on the camera and making the initial settings When you turn on the camera for the first time a screen appears enabling to set the language for the menus and messages displayed in the monitor and the date and time To change the selected date and time see Setting the date and time f G p 40 Press the ON OFF button to turn on the camera press A V lt I gt of the arrow pad to select your language and press the button 2 Press A V of the arrow pad to select the year for Y Date and time setting screen 3 Press gt of the arrow pad to save the setting for Y 4 As in Steps 2 and 3 press A V IP of the arrow pad to set M month D day Time hours and minutes and Y M D date order and then press the button d For precise time setting press the button as the time signal strikes 00 seconds 5 Press lt of the arrow pad to select time zone and then press the button e Use A V to turn daylight saving time Summer on or off n 13 02 26 12 30 ER MENU OOO Summer EN Learning how to use the camera e Press the ON OFF button to turn on the camera and enter the standby mode Press the ON OFF button again to turn off the camera e Select the shooting mode and press the shutter button to shoot a still image e To shoot a movie press the button e Set the shooting functions using the
74. ts the camera sounds operation sounds and shutter sound Volume 0 1 2 3 4 5 Selects the operation volume of camera buttons gt Volume 0 1 2 3 4 5 Selects the image playback volume EN 37 f Camera Menu 2 Adjusting the image processing function f Pixel Mapping e This function has already been adjusted at factory shipping and no adjustment is needed right after purchase Approximately once a year is recommended e For best results wait at least one minute after taking or viewing pictures before performing pixel mapping If the camera is turned off during pixel mapping be sure to perform it again To adjust the image processing function Press the x button when Start Submenu 2 is displayed e The check and adjustment of the image processing function starts 38 EN Adjusting the brightness of the monitor f P To adjust the monitor brightness D Use A V to adjust the brightness while viewing the screen and then press the 9 button Playing back images on a TV f NTSC PAL d The TV video signal system varies depending on the countries and regions Before viewing camera images on your TV select the video output according to your TV s video signal type Submenu 2 Submenu 3 Application Connecting the camera to a TV in North America Taiwan Korea Mee Japan and so on NTSC PAL Connecting the camera to a TV in European countries China and so on PAL
75. ue to reduce blur 24 EN Drive Sets the sequential shooting function C Single One frame is shot each time the shutter button is pressed oo Sequential The images are taken sequentially while holding down the shutter for up to 200 frames 4d High Speed The camera takes sequential shots at approximately 1 5 frames sec Ho High Speed2 The camera takes sequential shots at approximately 15 frames sec Image size Sets the number of recording pixels atl 4608x3456 Suitable for printing pictures over A3 11x17 in EM 3200x2400 Suitable for printing pictures up to A3 11x17 in 1920x1440 Suitable for printing pictures up to A4 size 8 5x11 in Ma 640x480 Suitable for using pictures on emails Aspect Sets the horizontal to vertical ratio of images ID 43 Change the horizontal to vertical ratio to 4 3 when taking pictures Ez 16 9 Change the horizontal to vertical ratio to 16 9 when taking pictures EA 32 Change the horizontal to vertical ratio to 3 2 when taking pictures IB 1 1 Change the horizontal to vertical ratio to 1 1 when taking pictures e In certain shooting modes some functions cannot be set Refer to List of settings available in each shooting mode p 57 e The image sizes are the examples when the aspect ratio is set to ED Registering one touch white balance Select G4 One Touch 1 or S2 One Touch 2 face the c
76. w picture orientations will be saved even after the power is turned off 1 13 87 MENU 34 EN 3 Repeat Step 2 to select the images to be erased and then press the MENU button to erase the selected images 4 Use A V to select Yes and press the button e The images with a V mark are erased To erase all images All Erase D Use A V to select All Erase and press the button 2 Use A V to select Yes and press the button Saving print settings to the image data gt Print Order e Print Reservations p 48 e Print reservation can be set only for still images that are recorded to the card Protecting images gt di e Protected images cannot be erased by Erase p 20 34 Sel Image p 34 or All Erase p 35 but all images are erased by Memory Format Format p 36 D Use lt P to select an image e Turn the zoom lever to the W end to display an index view Images can be quickly selected using the A V IP buttons 2 Press the button e Press the x button again to cancel the settings 3 If necessary repeat Steps 1 and to protect other images and press the MENU button Setting images to upload to Internet using OLYMPUS Viewer 3 gt Upload Order D Use lt P to select an image e Turn the zoom lever to the W end to display an index view Images can be quickly selected using the A V IP buttons 2 Press the button e Press the button ag
77. xpanding to view or erase images individually or erasing the grouped images collectively Expands Mmm Select the image and press the A IT button to display the images W T individually a e Use IP to view the previous A next frame button Playback pauses playback AV Adjusts the volume when playing back images with sound d If a group frame is erased all images in that group are erased collectively If the group includes images you want to keep expand the group and protect them individually 18 EN Playback mode display e Normal No Name Normal Detailed No info 1 Batterychek v Eye Fi transfer Pee v py 3 Protect wv v 4 jagani YY A Mec RENE Print reservation See ee number of prints 2 D Still image Frame number total number of images e Detailed a i D mera a 11 Shooting mode v oseni fa 14 13 Aperturevalue v 1 000 F28 20 PESUMEFTEE 15 14 Exposure EST Mu wd 9 16 compensation 12345 6 78 910 1 1213 A 5 DO axo 4608x3456 100 0004 13 02 26 12 30 submode 20 D BN 16 Whitebalance v s 17 Filename v No ineoniation 18 lmgesze v 19 Recording date sme vf vf 20 Groupedimage v v vyv Switching the displays The displays change in the order of Normal Detailed No info each time A INFO is pressed EN 19

Olympus D-780 Instruction Manual

Contents

Download Pdf Manuals

Related Search

Related Contents