Numark Industries EM460 User's Manual
Contents
1. Hold switch to lock in settings Fader start e Sampler 5 seconds at 48 kHz e 2 Zone outputs MIDI compatibility e Split blend headphone cueing 100 digital processing KAOSS technology under license from KORG Table of Contents Safety Measures 2 KAOSS Effects 8 Introduction 3 MIDI Implementation 9 Registration 3 Specifications 10 Description of the Features 4 Bock Diagram 11 Quick Setup Diagram 7 Warranty 12 Product Registration Please record the serial number of your unit as shown on the back of the chassis as well as the name of the dealer from whom you purchased the unit Retain this information and your original purchase receipt for your records Please return the enclosed warranty card to register your unit with us MODEL PURCHASED FROM SERIAL NUMBER DATE OF PURCHASE Numark The Leader in DJ Technology 2000 Numark Industries 3 http www numark com EM460 MIXER FEATURES 19 20 21 INPUTS Input faders control individual source levels in the mix Note Never use spray cleaners on the slide controls Residues cause excessive dirt build up and this will void your warranty In normal use slide controls can last for many years If they malfunction usually because of a dirty or dusty environment consult a professional technician Input Toggle Switches select which source will be live to that channel based on what you have connected to the rear panel input section Panning adjusts th2. QUICK SETUP DIAGRAM VERY IMPORTANT Please read this entire manual before connecting this unit to your system For optimum performance Always make sure that AC power is OFF while making any connections 9 Use appropriate cables throughout your system Do not use excessively long cables i e over 50ft 14m Be sure plugs and jacks are tightly mated Loose connections can cause hum noise or intermittence that could easily damage your speakers Make the input and output connections with readily available low capacitance stereo cables Quality cable makes a big difference in audio fidelity and punch See your Numark dealer or an electronics or audio specialist store if you are not sure which cables to get 9 ALWAYS remember TURN AMPS ON LAST AND OFF FIRST Begin with master faders or volume controls on minimum and the amplifier gain input control s down Wait 8 to 10 seconds before turning up the volume This prevents transients which may cause severe speaker damage Use restraint when operating controls Try to move them slowly Rapid adjustments could damage speakers due to amplifier clipping Avoid amplifier clipping at all costs this occurs when the red LEDs usually on the front panel of most professional power amplifiers start flashing Clipping is when the power amplifier is distorting and working beyond it s limits Amplifier distortion is THE major cause of speaker failure Study this setup diagram Make s
3. 59 SAMPLE PLAY1 PAN PAN LOOP TIME Tap L lt gt R 60 SAMPLE PLAY2 PAN PAN FORWARD REVERSE Tap L lt gt R AUTO REC After you press the REC switch recording will begin automatically when sound is input When you press the REC switch once again recording will end This is convenient when recording your voice from a mic Numark The Leader in DJ Technology 2000 Numark Industries E http www numark com EM460 MIDI FUNCTIONS With the factory settings each operation will transmit the following MIDI messages Operation MIDI messages transmitted Transmission on off z Pitch bend messages En 00 00 En 7F 7F PROGRAM MAPI Touch panel X axis Effect Control 1 message CC 12 Bn 0C 00 Bn 0C 7F PROGRAM MAP5 Modulation 1 Depth message CC 1 Y 5 9 Bn 01 00 Bn 01 7F PROGRAM MAP2 Touch panel Y axis Modulation 2 Depth message CC 2 Y 5 1 Bn 02 00 Bn 02 7F PROGRAM MAP3 Touch panel Effect 3 Depth Bn 5D 00 Bn 5D 7F PROGRAM MAP4 X4 Y axis gni ect 3 Depth message CC 93 n 5D 00 Bn 5D 7 Touch panel on off Effect 2 Depth message CC 92 Bn 5C 7F Bn 5C 00 HOLD switch FX ON OFF Effect 4 Depth message CC 94 Bn 5E 7F Bn 5E 00 FX ON OFF Change Program Program Change message 1 60 Cn 00 Cn 38 es The MIDI messages that are transmitted can be selected in the range of CC 1 CC 31 and CC 64 CC 95 In MIDI Edit mode MIDI transmission settings you can hold down the corresponding switch and rotate the P
4. DIST GAIN Rub fast with beat 5 DIST L P FILTER FREQ DIST GAIN Rub fast with beat 6 DIST L P FILTER FREQ RESONANCE Good for voice Mic 7 PAN FILTER PAN FREQ Rub 1 1 lt gt 9 9 8 DIST FILTER FREQ FX BALANCE DIST GAIN Rub fast with beat 9 ISOLATOR TYPE FILTER FREQ NO ASSIGN For Bass Cut 10 DISTORTION GAIN LEVEL For HOLD use 11 PHASER FREQ MANUAL DI FX BALANCE RESONANCE Rub slowly 12 PHASER LFO SPEED FREQ MANUAL Rub slowly 13 LFO WAH LFO SPEED FX BALANCE Rub fast with beat 14 STEP PHASER LFO SPEED MOD STEP Rub slowly 15 DIST PHASER LFO SPEED DIST GAIN Rub slowly 16 MANUAL FLANGER DELAY TIME RESONANCE Rub very slowly L lt gt R 17 MANUAL FLANGER DELAY TIME RESONANCE Rub very slowly L lt gt R 18 PITCH SHIFT Lch PITCH Rch PITCH Rub 19 TREMOLO LFO SPEED LFO DEPTH Rub 20 STEP PHASER LFO SPEED RESONANCE Rub slowly 21 TAPE ECHO TIME FX LEVEL FEEDBACK Rub Bottom lt gt Top 22 DELAY TIME FX LEVEL Tap with snare drum 23 DELAY TIME FX LEVEL FEEDBACK Rub 24 STEREO TAPE ECHO TIME FREQ Rub or tap 25 MEDIUM DELAY FEEDBACK FX LEVEL Rub fast 26 LONG DELAY FEEDBACK FX LEVEL Rub fast 27 X DELAY FEEDBACK FX LEVEL Rub or tap 28 TALK FILTER DELAY FILTER FREQ DELAY LEVEL Rub with beat 29 DIST FILTER DELAY FREQ DELAY LEVEL Rub with beat 30 DELAY FILTER FOR DUB TIME FREQ Rub or tap 31 REVERB HALL LOW CUT FX LEVEL Tap with snare drum 32 GATE REVERB HALL LOW CUT FX LEVEL Tap with snare drum 33 REVERB PLATE LOW CUT FX
5. input channels selected by the Crossfader Assign Note The crossfader is a user replaceable item and subject to wear Excessive force can wear out the fader quickly This is not a warranted item In case of failure Simply unscrew the two large screws that hold it in place lift it out and disconnect its cable Re attach the new crossfader and screw the mounting plate back onto the unit you re back in business KAOSS PAD 22 23 24 255 26 2 28 2000 Numark Industries Process buttons send post channel fader audio to the KAOSS PAD for processing Process Blend Control mixes processed efx wet audio with unprocessed src dry audio Use this in conjunction with the KOASS pad to reach desired effects Preset Program keys 1 6 You can assign programs to keys 1 6 for convenient selection Program assignment a Press one of the PROGRAM MAP keys b Use the PROGRAM knob to select the program that you wish to assign If you wish to memorize the HOLD setting turn the HOLD switch to ON after selecting the program and touch the touch panel to specify the position c Press and hold the PROGRAM MAP key you pressed in step for approximately two seconds Touch panel You can control the sound by using your finger to rub or tap strike lightly this panel Never press down too hard on the touch panel or place a heavy object on it Rough handling can cause it to crack or break Rubbing or pre
6. your right ear In blend mode both PFL and PGM can be heard in both ears 12 Headphone output for your 1 4 headphones OUTPUTS 13 Master Fader controls the overall output level 14 Stereo Mono toggle adjusts the Master output for stereo or mono operation 15 Panning adjusts the output balance of right to left audio 16 3 Band Stereo Equalizer EQ compensates for differences in source material sound quality In ultra compact mobile systems this EQ can be used to tailor the sound to the acoustical requirements of the room 17 Booth Zone Fader controls speaker volume for a remote zone or booth monitors NOTE This can also be used to supply line level audio to a lighting controller or to lights that are sound activated 18 Stereo Auto Peak Hold Level Indicator quickly and accurately tracks level of audio output The red LEDs for 3dB 5dB and 8dB hold program peaks for a second or two With peak metering it s OK to be in the red as long as 5dB or 8dB aren t constantly lit When using as a master output meter set the crossover equalizer and power amp inputs to avoid distortion at each step in the audio chain Proper attention to the peak meter results in the punchiest possible sound without audible distortion Numark The Leader in DJ Technology 2000 Numark Industries zs http www numark com EM460 19 CROSSFADER Replaceable Crossfader achieves clean segues between the two
7. EIGHT Numark The Leader in DJ Technology 2000 Numark Industries 10 http www numark com PRO SM 3 BLOCK DIAGRAM Numark The Leader in DJ Technology 2000 Numark Industries 11 http www numark com Numark Professional Disc Jockey Products LIMITED PRODUCT WARRANTY What is covered and for how long 1 NUMARK INDUSTRIES LCC NUMARK warrants to the original purchaser that NUMARK products including but not limited to DJ mixers amplifiers CD players CD Mix Stations turntables preamplifiers beatkeepers equalizers microphones headphones cartridges and all other accessories are to be free from defects in material and workmanship under normal use and service for the period commencing upon the date of purchase from an authorized NUMARK dealer for a period of 1 Year What is not covered This Limited Warranty is conditioned upon proper use of the product by the purchaser 2 This Limited Warranty does not cover a defects or damage resulting from accident misuse abuse neglect unusual physical or electrical stress modification of any part of the product or cosmetic damage b equipment that has the serial number removed or made illegible c all plastic surfaces and other externally exposed parts that are scratched or damaged due to normal use d defects or damage from improper testing operation maintenance installation adjustment or service of the mixers e crossfaders 3 What are NUMARK S obligati
8. LEVEL Tap with snare drum 34 GATE REVERB ROOM LOW CUT FX LEVEL Tap with snare drum 35 DELAY REVERB DELAY LEVEL REVERB LEVEL For HOLD use 36 DELAY REVERB DELAY TIME FX LEVEL For HOLD use 37 TALK FILTER REVERB FILTER FREQ FX LEVEL Rub fast with beat 38 DIST FILTER REVERB FILTER FREQ REV LEVEL RESONANCE Tap with snare drum 39 REVERB PAN PAN FX LEVEL Rub for panning 40 REVERB REVERB TIME FX LEVEL For HOLD use 41 STEP MODULATION MOD DEPTH FX LEVEL Rub slowly 42 RING MOD FILTER RING FREQ FILTER FREQ Tap at random 43 RING TALK MOD MOD SPEED RING FREQ As you like 44 SPECIAL ECHO TIME FX LEVEL Rub at random 45 RING DELAY TIME RING DELAY BALANCE Rub at random 46 DELAY TREMOLO TIME LFO SPEED DLY TREM X FADE Rub in circle 47 3D PAN PAN L R NEAR FAR Rub for panning 48 VIBRATE SPEED DEPTH FX BALANCE Rub Bottom lt gt Top 49 STEP FLANGER FREQ MANUAL FEEDBACK Rub slowly 50 STEP PHASER LFO SPEED FX LEVEL Rub slowly 51 SAMPLE PLAYI LOOP TIME FX LEVEL Tap for playback 52 SAMPLE PLAY2 FORWARD REVERSE FX LEVEL Rub like scratch 53 SAMPLE PLAY3 TIME STRETCH FX LEVEL Rub for TIME STRETCH 54 SAMPLE PLAY1 AUTO REC LOOP TIME FX LEVEL Tap for playback 55 SAMPLE PLAY2 AUTO REC FORWARD REVERSE FX LEVEL Rub like scratch 56 SAMPLE PLAY3 AUTO REC TIME STRETCH FX LEVEL Rub for TIME STRETCH 57 SAMPLE PLAY1 DIRECT MIX TYPE LOOP TIME FX LEVEL Tap for playback 58 SAMPLE PLAY2 DIRECT MIX TYPE FORWARD REVERSE FX LEVEL Rub like scratch
9. Numark Professional Disc Jockey Products EM460 PROFESSIONAL DJ EFFECTS MIXER With KAOSS Pad Multi effects Processor A22 TM PRR eee ee pee Rese Owner s Manual KAOSS technology under license from KORG 2000 Numark Industries http www numark com EM 460 Safety Information AN CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN CAUTION TO REDUCE THE RISK OF ELECTRIC SHOCK DO NOT REMOVE ANY COVER NO USER SERVICEABLE PARTS INSIDE REFER SERVICING TO QUALIFIED SERVICE PERSONNEL ONLY The lightning flash with arrowhead symbol within the equilateral triangle is intended to alert the user to the presence of un insulated dangerous voltage within the product s enclosure that may be of sufficient magnitude to constitute a risk of electric shock The exclamation point within the equilateral triangle is intended to alert the user to the presence of important operating and maintenance servicing instructions in the literature accompanvina this appliance CAUTION FOR USA amp CANADIAN MODELS ONLY TO PREVENT ELECTRIC SHOCK DO NOT USE THIS POLARIZED PLUG WITH AN EXTENSION CORD RECEPTACLE OR OTHER OUTLET UNLESS THE BLADES CAN BE FULLY INSERTED TO PREVENT BLADE EXPOSURE SAFETY INSTRUCTIONS a b c d e g Read Instructions AII the safety and operating instructions should be read before this product is connected and used Retain Instructions The safety and operati
10. ROGRAM knob to select the desired control number A control number that has already been assigned cannot be selected in duplicate MIDI transmission settings When you press the six PROGRAM MAP keys simultaneously you will enter MIDI Edit mode If you then perform no operation for approximately 10 seconds or if you touch the touch panel you will return to normal mode In MIDI Edit mode you can use the following operations to change the MIDI transmission settings PROGRAM knob Set the MIDI transmission channel 1 16 PROGRAM MAP keys FX ON OFF HOLD switches Turn transmission on off for each type of MIDI message refer to Transmission on off in the above table Precautions with the KAOSS PAD Usage Never press down too hard on the touch panel or place a heavy object on it Rough handling can cause it to crack or break Rubbing or pressing the touch panel with a sharp object can scratch it so only use your finger to operate it If cleaning 1s necessary wipe only with a soft dry cloth Using solvents such as thinner may melt the surface of the touch panel Note Affix the included protective label to extend product life Location Using the unit in the following locations can result in a malfunction n direct sunlight ocations of extreme temperature or humidity Excessively dusty or dirty locations Locations of excessive vibration Interference with other electrical devices This product contains a microcomput
11. S COVERING NUMARK MIXERS INCLUDING WITHOUT LIMITATION ANY WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE ARE LIMITED TO THE DURATION OF THIS LIMITED WARRANTY EXCEPT TO THE EXTENT PROHIBITED BY APPLICABLE LAW NUMARK SHALL NOT BE LIABLE FOR ANY SPECIAL INCIDENTAL CONSEQUENTIAL INDIRECT OR SIMILAR DAMAGES LOSS OF PROFITS DAMAGES TO PURCHASER S PROPERTY OR INJURY TO PURCHASER OR OTHERS ARISING OUT OF THE USE MISUSE OR INABILITY TO USE ANY NUMARK MIXER BREACH OF WARRANTY OR NEGLIGENCE INCLUDING BUT NOT LIMITED TO NUMARK S OWN NEGLIGENCE EVEN IF NUMARK OR ITS AGENT HAS BEEN ADVISED OF SUCH DAMAGES OR FOR ANY CLAIM BROUGHT AGAINST PURCHASER BY ANY OTHER PARTY THIS LIMITED WARRANTY IS THE COMPLETE WARRANTY FOR NUMARK S MIXERS AND IS GIVEN IN LIEU OF ALL OTHER EXPRESS WARRANTIES THIS LIMITED WARRANTY SHALL NOT EXTEND TO ANYONE OTHER THAN THE ORIGINAL PURCHASER OF THIS PRODUCT AND STATES PURCHASER S EXCLUSIVE REMEDY IF ANY PORTION OF THIS LIMITED WARRANTY IS ILLEGAL OR UNENFORCEABLE BY REASON OF ANY LAW SUCH PARTIAL ILLEGALITY OR UNENFORCEABILTY SHALL NOT AFFECT THE ENFORCEABILITY OF THE REMAINDER OF THIS LIMITED WARRANTY WHICH PURCHASER ACKNOWLEDGES IS AND WILL ALWAYS BE CONSTRUED TO BE LIMITED BY ITS TERMS OR AS LIMITED AS THE LAW PERMITS 5 This Limited Warranty allocates risk of product failure between purchaser and NUMARK and NUMARK S product pricing reflects this allocation of risk and the limitations of liability contained
12. ader to send play and cue commands to your auto start Numark CD player or other popular brand For fader start attach your mixer to a remote start CD player using industry standard 1 8 3 5mm cables When you move the crossfader toward the active channel the attached CD player will start When it is moved away that side will cue similar to pressing the cue button EFX ON OFF Sample Record switch This can be used to switch between the effect sound and the direct unprocessed sound or to record a sample When sampling this button lets you record a phrase that you hear and then play it back by operating the touch panel Use the following procedure to record and playback samples 9 Using the PROGRAM knob or the PROGRAM MAP keys select a sample play effect program numbers 51 60 The REC switch LED will blink and the KAOSS PAD will be in record ready mode At this time the sound will be output without any change 9 Press the REC switch to begin recording 9 Press the REC switch once again to stop recording The REC switch LED will light Even if you do not press the REC switch recording will end automatically when the maximum recording time has elapsed The maximum recording time will depend on the program 9 Operate the touch panel to playback the recorded phrase The sound will change depending on the position where you touch the panel The way in which the sound changes will depend on the program 9 To re record p
13. aned only as recommended by the manufacturer Non use Periods The power cord of the appliance should be unplugged from the outlet when left unused for long periods of time Damage Requiring Service Never ue to moa pany adjustments or repairs other s than those described in this manual Only qualified personnel should service this product If you have any questions about service please contact Numark at the number s shown on the back cover of this manual Grounding or Polarization Precautions should be taken so that the grounding or polarization means built into the CD player is not defeated Internal External Voltage Selectors Internal or external voltage selector switches if any should only be reset and re equipped with a proper plug for alternative voltage by a qualified service technician Do not attempt to alter this yourself WARNING To reduce the risk of fire or electrical shock do not expose this appliance to rain or moisture Electrical equipment should NEVER be kept or stored in damp environments SERVICE INSTRUCTIONS Disconnect power cord before servicing Replace critical components only with factory parts or recommended equivalents For AC line powered units Before returning repaired unit to user use an ohmmeter to measure from both AC plug blades to all exposed metallic parts The resistance should be no more than 100 000ohms Numark The Leader in DJ Technology 2000 Numark Industrie
14. cassette and reel to reel tape decks DAT machines CD players laser discs tuners even synthesizers or other mixing consoles NOTE Plug mono audio sources into both Left and Right inputs using a Y cable connector 10 11 12 13 14 Mic Inputs for plugging in your 4 mic connector plugs Record Outputs Unbalanced output used to send the output of the program to any connected recording device Zone Booth Outputs Unbalanced output controlled by Zone Level control on the face panel for extra speakers lighting or recording your mix Unbalanced Main Outputs Unbalanced program output controlled by the Master fader knob Balanced Outputs These XLR Stereo Main Outputs are reliable Balanced connectors controlled by the Master fader knob Power transformers and other devices which cause magnetic fields can induce hum in audio cables This can be best resolved by using balanced lines where inputs and outputs permit Balanced lines are also the most effective means of reducing or eliminating RF or radio frequency interference Fader Start Connector to attach your mixer to a remote start equipped Numark CD player using industry standard 1 8 3 5mm cables MIDI Output Attach Midi output to external processors to be controlled by the KAOSS Pad See page 9 for details on signal output Numark The Leader in DJ Technology 2000 Numark Industries m http www numark com EM460
15. e balance of right to left audio 3 Band Stereo Equalizer EQ compensates for differences in source material sound quality You can create interesting effects by removing frequencies if you turn the knob to 30dB PFL Gain allows you to adjust the input level of the music to match other channels The idea is to set all input levels to approx OdB so channels match Do not try to match to the master output meter PFL Meter to allow for precise matching of channel input levels Neutrik Combo connector allows connection of either a 1 4 jack or an XLR jack This is ideal for connecting an XLR gooseneck directly into the mixer HEADPHONE CUEING Channel Cue Assign are used to route Pre Fader Level PFL channel audio to the Monitor Section The channel faders do not control the Cue volume Headphone Mix controls the mix of PFL and PGM signals to your headphones When the slider is moved to the left all you will hear is the cue source When the slider is all the way to the right you will hear what is playing through the master output By blending beats can be matched exactly and segues can be smooth when a song is cued 10 Headphone Level adjusts cue volume 23 24 18 22 16 a 29 5 28 15 14 13 27 26 30 17 11 9 10 12 11 Split Blend Cue controls how PFL and Program audio are sent to your headphones In split mode the PFL audio can be heard in your left ear and PGM audio can be heard in
16. er Radios and televisions placed nearby may experience reception interference Operate this unit at a suitable distance from radios and televisions Handling To avoid breakage do not apply excessive force to the switches or controls Care If the exterior becomes dirty wipe it with a clean dry cloth Do not use liquid cleaners such as benzene or thinner or cleaning compounds or flammable polishes Numark The Leader in DJ Technology 2000 Numark Industries 9 http www numark com EM460 SPECIFICATIONS INPUTS Line 10Kohm input impedance 110mV rms sensitivity for 1 22V output Mic 10Kohm input impedance unbalanced 1 6 mV rms sensitivity for 1 22V output 500mV rms max input Phono 47Kohm input impedance 1 8mV rms sensitivity 1 KHz for 1 22V output OUTPUTS Line 9V rms max Headphone Amp 1V rms watt into 16ohm Distortion less than 0 01 SIGNAL TO NOISE RATIOS vs maximum output Line Better than 90 dB Mic Better than 77 dB Phono Better than 85 dB JIS weighted FREQUENCY RESPONSE Line 20 Hz 22k Hz 0 5 dB Line 20 Hz 20k Hz 0 5 dB Phono t dB except for controlled attenuation of 3 dB 20 Hz to reduce rumble and feedback EQUALIZER 12dB 100Hz 6dB 500Hz 12dB 10KHz KOASS PAD Programs 60 Sampling length 5 Seconds POWER CONSUMPTION 10 Watt typical 15 watt with full headphone output DIMENSIONS 480mm W x 265mm H x 95mm D 19 W x 10 1 2 H x 4 D W
17. in this Limited Warranty The agents employees distributors and dealers of NUMARK are not authorized to make modifications to this Limited Warranty or make additional warranties binding on NUMARK Accordingly additional statements such as dealer advertising or presentation whether oral or written do not constitute warranties by NUMARK and should not be relied upon 6 How does state law apply to this warranty SOME STATES DO NOT ALLOW THE EXCLUSION OR LIMITATIONS OF INCIDENTAL OR CONSEQUENTIAL DAMAGES OR HOW LONG AN IMPLIED WARRANTY LASTS SO THE ABOVE LIMITATIONS OR EXCLUSIONS MAY NOT APPLY TO PURCHASER 7 This Limited Warranty gives you specific legal rights You may also have other rights which vary from one jurisdiction to another RETURN INFORMATION a A Return Authorization number must be obtained from Numark through the address or phone numbers below b A copy ofthe original sales receipt must also be included for the equipment to be repaired under warranty c The faulty equipment must be packed in its original packaging d One additional outer layer of packaging must be included to ensure product safety Failure to do so may inadequately protect the equipment in transit and therefore jeopardize the customer s warranty Numark will not accept COD shipments and no call tags will be issued for merchandise return Numark will not return repaired merchandise to customers by priority service unless by written request at the customer s co
18. ng instructions should be kept for future reference Heed Warnings All warnings on this product and in these operating instructions should be followed Follow Instructions All operating and other instructions should be followed Water and Moisture This product should be kept away from direct contact with liquids Heat Avoid placing this product to close to any high heat sources such as radiators Ventilation The appliance should be situated so that it s location or position does not interfere with it s proper ventilation For example the appliance should not be situated on a bed sofa rug or similar surface that may block the ventilation opening x or placed in a built installation such as bookcase or cabinet that may impede the flow of air through the ventilation openings J k 1 m n o Power Sources This product should be connected to a power supply only of the type described in these operating instructions or as marked on the unit Power Cord Protection Power supply cords should be routed so that they are not likely to be walked upon or pinched by items placed on or against them When removing the cord from a power outlet be sure to remove it by holding the d T plug attachment and not by pulling on the cord Object and Liquid Entry Take care that objects do not fall into and that liquids are not spilled into the inside of the mixer Cleaning The appliance should be cle
19. ons During the applicable warranty period NUMARK will repair or replace at NUMARK S sole discretion without charge to the purchaser any defective component part of the mixer To obtain service under this Limited Warranty purchaser must first contact NUMARK and obtain a return authorization number RA Purchaser must then return the mixer to NUMARK in an adequate container for shipping accompanied by purchaser s sales receipt or comparable proof of sale showing the date of purchase the serial number of the product and the seller s name and address To obtain an RA and assistance on where to return the mixer contact NUMARK customer service at 401 295 9000 Upon receipt NUMARK will repair or replace the defective products NUMARK may at NUMARK S sole discretion use rebuilt reconditioned or new parts or components when repairing any product or replace a product with a rebuilt reconditioned or new product Repaired mixers will be warranted for a period equal to the remainder of the original Limited Warranty on the original mixer or for 90 days whichever is longer All replaced parts components boards and equipment become the property of NUMARK If NUMARK determines that any mixer is not covered by this Limited Warranty purchaser must pay all parts shipping and labor charges for the repair or return of such mixer 4 What are the limits on NUMARK S liabilities THE WARRANTIES GIVEN IN THIS LIMITED WARRANTY TOGETHER WITH ANY IMPLIED WARRANTIE
20. ress the REC switch again The previously recorded phrase will be erased and a new phrase will be recorded If you change programs to a non sample program the recorded phrase will be erased KAOSS technology under license from KORG Numark The Leader in DJ Technology 25 http www numark com EM460 REAR PANEL FEATURES Power Switch To turn unit on after you have turned on all input devices and before you turn on any devices attached to the output IEC Power Cord Receptacle To plug your power cord in before switching on power See safety precautions on page 3 for proper treatment of power Voltage Selector Switch To select the proper power for your region Please check carefully that this switch is set properly for your area before plugging the unit in Phono Auxiliary Inputs Plug your turntables or line device in here Select the AUX PHONO switch 6 to the desired input Phono Auxiliary switch Select the appropriate position for your input device With phono selected the input signal is fed directly to the PRO SM 1 s high quality RIAA phono pre amplifiers so use this input only for turntables Line level sources will overload the sensitive phono pre amps Switch this over to the AUX position for line devices such as CD players and Tape decks Ground lug Use these connections with your turntables grounding cable to avoid signal hum Line Inputs To connect stereo audio from HiFi VCRs
21. s http www numark com EM460 Numark MA60 prortssionat ns errecTS MIXER With KAOSS PAD Multi effects Processor CONGRATULATIONS You have purchased the EM460 Stereo Effects Mixer by Numark The first series of DJ mixers with a completely interactive real time effects processor This one of a kind DJ product boasts all of the qualities that you have come to expect from a Numark mixer plus it features a built in KAOSS PAD This piece of equipment literally puts effects processing at the DJ s fingertips The EM460 1s easily suited for mobile or installation use Special features found on this product are eight line inputs rotary cut control balanced outputs and fader start The fader start feature 1s designed to work with Numark s Fader Start CD players as well as its other popular CD players The KAOSS Pad effects processing unit lets the DJ control his choice of up to sixty effects programs in real time The effects unit allows for sampling functions parameter controls and MIDI compatibility Thank you for purchasing NUMARK products Mixer Features KAOSS PAD Features Eight line three phono two mic inputs Real time effects processing Front panel Neutrik mic input e X Y touch sensitive pad e Master with Balanced outputs with EQ and Panning e Separate parameter controls e 3 band EQ Pan and gain control on all channels e Sixty effects programs Completely assignable and replaceable cross fader
22. ssing the touch panel with a sharp object can scratch it so only use your finger to operate it If cleaning is necessary wipe only with a soft dry cloth Using solvents such as thinner may melt the surface of the touch panel Note Affix the included protective label to extend product life Hold Switch When this switch 1s ON the current state of the effect will be maintained even if you remove your finger from the touch panel Program Knob Use this knob to select programs 1 60 Please see page for a complete listing of effects Program Location Display This shows either the currently selected program number or the location of the point that you touched on the touch panel depending upon mode 9 When selecting a program the program number 1 60 will be displayed 9 When operating the touch panel the position you touched 1 1 9 9 with 5 5 being the center will be displayed Example display 3 8 vertical position is 3 horizontal position is 8 If you select a program that has a Hold On setting the program number will be displayed and then the position that is being held will be displayed 20 21 29 Crossfader Assign Knob determines which input channel will be heard when the crossfader is moved towards the knob With the crossfader centered both assigned channels are live Use the crossfader for fast and seamless segues from one selected channel to the other Fader Start activates the crossf
23. st Requests must be submitted in writing with merchandise returned g Thedefective Numark equipment should be sent FREIGHT PREPAID with Return Authorization number clearly printed on the outer packaging and original sales receipt enclosed to D h Numark INDUSTRIES Attention Service Department Phone 1 401 295 9000 11 Helmsman Avenue Fax 1 401 295 5200 North Kingstown RI 02852 USA Web www numark com
24. ure all faders are at Zero and all devices are off First connect all input sources and processors Next connect your microphone and monitor headphones Finally connect the stereo outputs to the power amplifier s and or audio receivers such as tape decks Plug your mixer into AC power Now you are ready to switch everything on IMPORTANT Always switch on your audio input sources such as turntables or CD players first then your mixer and finally any amplifiers When turning off always reverse this operation by turning off amplifiers then your mixer and then input devices Main Balanced EN Sound System Mii w Amplifier Main ee Turntable 1 Unbalanced o1 EN Sound System MIN or AC Outlet 000 EN Sound System Ei w Amplifier OR Digital Sampler uu Numark The Leader in DJ Technology 2000 Numark Industries 7 http www numark com EM460 KAOSS PROGRAM EFFECTS Effect program control parameter list NA EFFECT X horizontal position Y Y Y vertical position Comment 1 LOW PASS FILTER FREQ DI FX BALANCE RESONANCE Rub slowly 2 LOW PASS FILTER FREQ RESONANCE Rub slowly 3 WAH FILTER FREQ DI FX BALANCE LFO DEPTH Rub slowly 4 DIST VOICE FILTER FREQ
Download Pdf Manuals
Related Search