Numark Industries CDN25 User's Manual
Contents
1. Numark CDN25 PROFESSIONAL DUAL CD PLAYER MANUAL 2001 Numark industries http www numark com CDN25 SAFETY INSTRUCTIONS a Read Instructions All the safety and operating instructions should be read before this product is connected and used b Retain Instructions The safety and operating instructions should be kept for future reference c Heed Warnings All warnings on this product and in these operating instructions should be followed d Follow Instructions All operating and other instructions should be followed e Placement place the unit in a clean dry location f Water and Moisture This product should be kept away from direct contact with liquids The apparatus shall not be exposed to dripping or splashing and that no objects filled with liquids such as vases shall be placed on the apparatus g Temperature Avoid placing this product to close to any high heat sources such as radiators Do not use this unit at temperatures below 41 F 5 C or higher than 95 F 35 C h Ventilation The appliance should be situated so that it s location or position does not interfere with it s proper ventilation For example the appliance should not be situated on a bed sofa rug or similar surface that may block the ventilation opening or placed in a built installation such as bookcase or cabinet that may impede the flow of air through the ventilation openings i Power Sources This product shoul2. 14 Remain indicates when track remain time is displayed 15 Total indicates when total CD remain time is displayed note if both indications will not be lit when the unit is showing elapsed time 16 PITCH DISPLAY indicating current pitch o NN Oe Or Pe Numark The Leader in DJ Technology C2001 Numark Industries 9 http www numark com CDN25 Numark The Leader in DJ Technology 2001 Numark Industries 10 http www numark com CDN25 DESCRIPTION OF THE PLAY PAUSE AND CUE OPERATIONS PLAY and CUE Press PLAY PAUSE Press CUE O Position on disc 3 Play interval Back cue operation Pressing the PLAY PAUSE button starts the disc Pressing the CUE button will reset the disc to the last place where the disc was started This is called the cue point By alternately pressing the PLAY PAUSE button and the CUE button the disc may be returned and played from the cue point any number of times This function is called back cue PLAY PAUSE and CUE Press PLAY PAUSE Press PLAY PAUSE Press CUE rn Con 3 eve Position on disc Play interval Play interval 8 2Ck cue to new cue point When Play is paused and then started again the return position for the back cue will be updated as the new cue point EDITING CUE POINT Press PLAY PAUSE Press CUE O a Con 3 cue Position on disc Back cue operation When the jog wheel is turned while a cu
3. Press the PLAY button PLAYER 2 PLAYER 2 A i Select the track to be played Press the PLAY button PLAYER 2 PLAYER 2 Press search and rotate wheel to rapidly look for a Press search to release Slowly set the right cue Listen with the monitor and press the play button PLAYER 2 With a matching downbeat from Player 1 press the play button cue point point using the jog wheel PLAYER 2 PLAYER 2 gt Press the cue button then play to be sure of the set cue point Set the player to the Cue point by pressing Cue PLAYER 2 MIXER If you are beat mixing turn on your Pitch adjust and follow the directions for beat matching Numark The Leader in DJ Technology When you are happy with you mix adjust you mixer accordingly http www numark com CDN25 BEFORE SWITCHING OFF THE POWER When you have finished using the CD player be sure that the disc tray is closed with the OPEN CLOSE button before switching off the power DO NOT switch off the power when the disc holder is open TROUBLESHOOTING Switch off the power after the disc holder has been closed with the OPEN CLOSE button Symptom Possible Cause Corrective Action The power fails to
4. and remaining time on the total CD When toggled to remaining time total the total number of remaining tracks will also show 4 LCD DISPLAY Indicates all the functions as they are occurring with the CD 5 Track Buttons These buttons are used to select the track to be played 6 Search Button Pressing this button allows you to use the wheel and rapidly scan the music to find a cue point The search function automatically shuts off after 8 seconds of non use or you may toggle it off 7 Cue Returns and pauses the music at the last set cue point The cue point is where the music will begin when play is pressed The cue point is set as the initial start point on a track or can be moved when play is started at a different point For instance if the music is paused then play is pressed a new cue point is set You can easily edit the cue point by turning the wheel during pause As you rotate the wheel the music will sound By stopping the wheel and pressing play a new point is set Alternately pressing the PLAY button and the CUE button allows the CD to be played from the same position any number of times Note Pressing cue 2 times plays music temporarily from this point until the button is released Numark The Leader in DJ Technology 2001 Numark Industries 6 http www numark com CDN25 8 Play Pause Starts the music from the cue point or pauses it while in play By pressing play after pause a new cue point will be set 9 Jog Whee
5. shown on the back of the chassis as well as the name of the dealer from whom you purchased the unit Retain this information and your original purchase receipt for your records Please return the enclosed warranty card to register your CD player with us MODEL PURCHASED FROM SERIAL NUMBER DATE OF PURCHASE Numark The Leader in DJ Technology 2001 Numark Industries 3 http www numark com CDN25 TABLE OF CONTENTS Safety Instructions 2 Introduction and Registration 3 Set up amp Connections 5 Description of the Features Face Panel 6 Rear Panel 8 Display 9 Basic Operation Play Pause and Cue Operations 11 Matching the Tempo 12 Beat Matching Using Pitch Bend 12 Example of Mixing 13 Before Switching off the Power 14 Troubleshooting Guide 14 Information and Specifications 15 Warranty 16 Numark The Leader in DJ Technology C2001 Numark Industries 4 http www numark com CDN25 SETUP and CONNECTIONS 18 Typical connection with a mixer is illustrated below 1 Mount the units in your console or rack with 19 EIA rails TRANSPORT 2 The transport should be mounted not to exceed an angle of 15 degrees 3 Your CD player can be affected by excess vibration so mount the units in a secure environment if possible 4 Connect the supplied Control Cable between the CD Control and CD Transport unit CONTROL CABLE 5 Connect the line output connections using the supplied audio cables from the CD Playe
6. switch on when the POWER switch is set to on Poor power plug connection at the AC outlet or IEC Power cord loose from rear of unit Insert the power plug firmly into the AC outlet and make sure connection is good in unit rear Disc play does not start The disc is loaded upside down The disc is too dirty Reload the disc with the label side up Clean the disc No sound Improper output cable connections Connect the output cables correctly Improper amplifier operation Check amplifier setup Sound skips The CD player is subject to vibrations Change the installation location or physical shock The disc is too dirty Clean the disc Hum Loose cable connections Firmly connect all audio plugs Numark The Leader in DJ Technology 2001 Numark Industries 14 http www numark com CDN25 SPECIFICATIONS TECHNICAL Disc Type Standard Compact discs 12 cm amp 8 cm Time Display Track Elapsed Track Remain or Total remain Quantization Oversampling rate Sampling Frequency Frequency response T H D NOISE S N ratio IHF A Channel separation Output level Short Access Time Long Access Time Start Time Pitch control range Pitch bend Digital Output GENERAL Dimensions Weight Power Supply Power Consumption 2000 Numark Industries 1 bit linear Channel 3 Beam Laser 8 Times 44 1 kHz 20 Hz to 20 kHz Less Than 0 01 gt 90 dB gt 90 dB 2 Volts R M S lt 1 5 se
7. used only with a cart or stand that is recommended by the manufacturer of the cart or stand An appliance and cart combination should be moved with care Quick stops excessive force and uneven surfaces may cause the appliance and cart combination to overturn SERVICE INSTRUCTIONS Disconnect power cord before servicing Replace critical components A only with factory parts or recommended equivalents For AC line powered units Before returning repaired unit to user use an ohmmeter to measure from both AC plug blades to all exposed metallic parts The resistance should be no more than 100 000ohms DANGER INVISIBLE LASER RADIATION WHEN OPEN AND INTERLOCK FAILED OR DEFEATED AVOID DIRECT EXPOSURE TO BEAM USE OF CONTROLS OR ADJUSTMENTS OTHER THAN THOSE SPECIFIED HEREIN MAY RESULT IN HAZARDOUS RADIATION EXPOSURE CAUTION AN RISK OF ELECTRIC SHOCK AN DO NOT OPEN CAUTION TO REDUCE THE RISK OF ELECTRIC SHOCK DO NOT REMOVE ANY COVER NO USER SERVICEABLE PARTS INSIDE REFER SERVICING TO QUALIFIED SERVICE PERSONNEL ONLY The lightning flash with arrowhead symbol within the equilateral triangle is intended to alert the user to the presence of un insulated dangerous voltage within the product s enclosure that may be of sufficient magnitude to constitute a risk of electric shock The exclamation point within the equilateral triangle is intended to alert the user to the presence of important operating and maintenance se
8. E WARRANTIES GIVEN IN THIS LIMITED WARRANTY TOGETHER WITH ANY IMPLIED WARRANTIES COVERING NUMARK MIXERS INCLUDING WITHOUT LIMITATION ANY WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE ARE LIMITED TO THE DURATION OF THIS LIMITED WARRANTY EXCEPT TO THE EXTENT PROHIBITED BY APPLICABLE LAW NUMARK SHALL NOT BE LIABLE FOR ANY SPECIAL INCIDENTAL CONSEQUENTIAL INDIRECT OR SIMILAR DAMAGES LOSS OF PROFITS DAMAGES TO PURCHASER S PROPERTY OR INJURY TO PURCHASER OR OTHERS ARISING OUT OF THE USE MISUSE OR INABILITY TO USE ANY NUMARK MIXER BREACH OF WARRANTY OR NEGLIGENCE INCLUDING BUT NOT LIMITED TO NUMARK S OWN NEGLIGENCE EVEN IF NUMARK OR ITS AGENT HAS BEEN ADVISED OF SUCH DAMAGES OR FOR ANY CLAIM BROUGHT AGAINST PURCHASER BY ANY OTHER PARTY THIS LIMITED WARRANTY IS THE COMPLETE WARRANTY FOR NUMARK S MIXERS AND IS GIVEN IN LIEU OF ALL OTHER EXPRESS WARRANTIES THIS LIMITED WARRANTY SHALL NOT EXTEND TO ANYONE OTHER THAN THE ORIGINAL PURCHASER OF THIS PRODUCT AND STATES PURCHASER S EXCLUSIVE REMEDY IF ANY PORTION OF THIS LIMITED WARRANTY IS ILLEGAL OR UNENFORCEABLE BY REASON OF ANY LAW SUCH PARTIAL ILLEGALITY OR UNENFORCEABILTY SHALL NOT AFFECT THE ENFORCEABILITY OF THE REMAINDER OF THIS LIMITED WARRANTY WHICH PURCHASER ACKNOWLEDGES IS AND WILL ALWAYS BE CONSTRUED TO BE LIMITED BY ITS TERMS OR AS LIMITED AS THE LAW PERMITS This Limited Warranty allocates risk of product failure between purchaser and NUMARK and NUMARK S product pricing
9. adjustment or service of the mixers e crossfaders What are NUMARK S obligations During the applicable warranty period NUMARK will repair or replace at NUMARK S sole discretion without charge to the purchaser any defective component part of the mixer To obtain service under this Limited Warranty purchaser must first contact NUMARK and obtain a return authorization number RA Purchaser must then return the mixer to NUMARK in an adequate container for shipping accompanied by purchaser s sales receipt or comparable proof of sale showing the date of purchase the serial number of the product and the seller s name and address To obtain an RA and assistance on where to return the mixer contact NUMARK customer service at 401 295 9000 Upon receipt NUMARK will repair or replace the defective products NUMARK may at NUMARK S sole discretion use rebuilt reconditioned or new parts or components when repairing any product or replace a product with a rebuilt reconditioned or new product Repaired mixers will be warranted for a period equal to the remainder of the original Limited Warranty on the original mixer or for 90 days whichever is longer All replaced parts components boards and equipment become the property of NUMARK If NUMARK determines that any mixer is not covered by this Limited Warranty purchaser must pay all parts shipping and labor charges for the repair or return of such mixer What are the limits on NUMARK S liabilities TH
10. conds lt 3 seconds within 0 03 seconds 8 and 16 16 type 2 form 1 S PDIF Sony Phillips Digital Interface Format Controller mm 482 X 88 5X 46 Main Unit 482 X 88 5 X 257 Controller 1 7 Kg Main Unit 4 9 Kg 115 230V AC 50 60Hz 24W Numark The Leader in DJ Technology 15 http www numark com Numark Professional Disc Jockey Products LIMITED PRODUCT WARRANTY What is covered and for how long NUMARK INDUSTRIES LCC NUMARK warrants to the original purchaser that NUMARK S DJ Mixers Amplifiers CD players turntables preamplifiers beatkeepers equalizers microphones headphones and all other accessories are free from defects in material and workmanship under normal use and service for the period commencing upon the date of purchase from an authorized NUMARK dealer and continuing for the following period of time after that date for 1 Year What is not covered This Limited Warranty is conditioned upon proper use of the product by the purchaser This Limited Warranty does not cover a defects or damage resulting from accident misuse abuse neglect unusual physical or electrical stress modification of any part of the product or cosmetic damage b equipment that has the serial number removed or made illegible c all plastic surfaces and other externally exposed parts that are scratched or damaged due to normal use d defects or damage from improper testing operation maintenance installation
11. d be connected to a power supply only of the type described in these operating instructions or as marked on the unit D Power Cord Protection Power supply cords should be routed so that they are not likely to be walked upon or pinched by items placed on or against them When removing the cord from a power outlet be sure to remove it by holding the plug attachment and not by pulling on the cord k Object and Liquid Entry Take care that objects do not fall into and that liquids are not spilled into the inside of the mixer l Cleaning The appliance should be cleaned only as recommended by the manufacturer Do not use chemical solvents to clean the unit m Non use Periods The power cord of the appliance should be unplugged from the outlet when left unused for long periods of time n Damage Requiring Service Only qualified personnel should service this product If you have any questions about service please contact Numark at the number s shown on the back cover of this manual o Grounding or Polarization Precautions should be taken so that the grounding or polarization means built into the CD player is not defeated p Internal External Voltage Selectors Internal or external voltage selector switches if any should only be reset and re equipped with a proper plug for alternative voltage by a qualified service technician Do not attempt to alter this yourself q Carts and Stands The appliance should be
12. d on PLAYER 1 This procedure can be done on either PLAYER After matching the BPM s adjust the pitch temporarily as follows When PLAYER 2 is behind rotate the jog wheel When PLAYER 2 is ahead rotate the jog wheel counter clockwise to bend pitch faster clockwise to bend pitch slower The pitch changes automatically while the jog wheel is rotated The faster you rotate the wheel the more you change Releasing the wheel results in a return to the original pitch So the BPM s are once again the same Numark The Leader in DJ Technology C2001 Numark Industries 12 http www numark com CDN25 EXAMPLE OF MIXING USING TWO CD PLAYERS While playing a disc on PLAYER 1 load a disc into PLAYER 2 and select your next track match its pitch to the track playing on PLAYER1 and when you are ready use the crossfader on your mixer to fade from PLAYER 1 to PLAYER 2 Load a disc in PLAYER 1 and select the track and press PLAY Load a disc in PLAYER 2 and select the track then play Set and edit a start cue point on PLAYER 2 Check you new cue point Do a MIX 2001 Numark Industries PLAYER 1 PLAYER 1 PLAYER 1 Load a disc and press the OPEN CLOSE button PLAYER 2 pee 2 S gt 7 Load a disc and press the OPEN CLOSE button PLAYER 2 Press the Pause button of PLAYER 2 E Select the track to be played
13. dance with Section 15 838 of the FCC Rules This unit does not exceed the Class B limits for radio noise emission from digital apparatus set out in the radio interference regulations of the Canadian Department of Communications DOUBLE INSULATED When servicing use only identical replacement parts For 220 volt use in USA use NEMA style 220 volt plug For other countries use proper plug for local outlet Numark The Leader in DJ Technology 2001 Numark Industries 2 http www numark com CDN25 Numark CDN25 PROFESSIONAL DUAL CD PLAYER CONGRATULATIONS You have just purchased a CD player designed specifically for the professional DJ This unit has been designed to provide CD mixing with the same ease and creativity that you have enjoyed with records Please take a few moments to familiarize yourself with the CDN25 by reading the following information before attempting to operate the unit Once again congratulations and thank you for making the CDN25 your choice in professional CD players FEATURES e Interactive pitch wheel adjustment e Rapid wheel search e Rubber buttons e Auto cue e Digital Output e Pitch display e Frame search e CDR compatible e Sleep mode CHECK TO BE SURE THE FOLLOWING ITEMS ARE IN THIS BOX CD PLAYER TRANSPORT UNIT OWNERS MANUAL THIS BOOKLET CD PLAYER CONTROL UNIT RCA CONNECTING CABLES 2 pair IEC POWER CORD CONTROL CABLE Please record the serial number of your unit as
14. e point is set a new cue point can be located The CD player will repeatedly play small parts of the CD as you move it to the desired position By pressing PLAY PAUSE then CUE you can confirm that this new cue point is desirable Numark The Leader in DJ Technology 2001 Numark Industries 11 http www numark com CDN25 MATCHING THE BEATS PER MINUTE BPM Match the tempo by monitoring the music of both PLAYER 1 and PLAYER 2 by ear and adjusting the pitch When the tempo of the music of the selected CD player is slow compared to the tempo of the other player move the slider to the side and match the tempo When faster move the pitch slider to the side The following description is for the case of matching the pitch of PLAYER 2 to the pitch of the music being played on PLAYER 1 5 a 2 ao CD Press PLAY PAUSE to start PLAYER 1 Press PLAY PAUSE to start PLAYER 2 PLAYER 1 is playing Both CD players are playing discs Listen to PLAYER 2 in your headphones When PLAYER 2 is slow E When PLAYER 2 is fast F compared to PLAYER 1 compared to PLAYER 1 speed up PLAYER 2 slow down PLAYER 2 MATCHING BEATS USING PITCH BEND If you find the BPM s Beats Per Minute or Tempos are the same however the drumbeats are not matched you will need to temporarily change the pitch This description is for the case of matching the beat of PLAYER 2 to the beat of the music being playe
15. e to customers by priority service unless by written request at the customer s cost Requests must be submitted in writing with merchandise returned e The defective Numark equipment should be sent FREIGHT PREPAID with Return Authorization number clearly printed on the outer packaging and original sales receipt enclosed to Numark INDUSTRIES Attention Service Department Phone 1 401 295 9000 11 Helmsman Avenue Fax 1 401 295 5200 North Kingstown RI 02852 USA Web www numark com
16. he music of the CD you wish to match is slow compared to the tempo of the other music move the slider to the side and match the speed When faster move the pitch slider to the side By making this adjustment the speeds will be matched though the beats may not yet be aligned 13 CD Drawer Place your CDs you wish to play in here This unit is designed to play commercially available CD and properly burned and finalized CDR and CDRW formats Due to variances on the specification of certain CD burners and CDs some discs home made CDs may not play properly 14 Power Switch Turn on and turn off the machine with this button The unit should always be shut down with this button first before any external power is removed Numark The Leader in DJ Technology 2001 Numark Industries 7 http www numark com CDN25 REAR PANEL FEATURES 15 Control Cable Connector Plug in the 8 pin cable included in here to connect the remote control and main CD unit together 16 IEC Power Plug Connector Plug your supplied power cord in here 17 Voltage Selector Set this switch to the voltage for your location 18 RCA Audio Connectors Connect your CD player to your mixer from this line level output 19 Digital Output The format is type 2 form 1 also known as S PDIF Sony Phillips Digital Interface Format In order to use the digital output you should not use variable pitch slider and the pitch bend buttons f yo
17. l Cue Function As explained under CUE when the music is paused and you rotate the wheel music will sound By pressing play a new cue point is set Search Function As explained under SEARCH BUTTON when search is press and you rotate the wheel the music will rapidly scan the music to find a cue point Pitch Bend Function allows the user to temporarily change the speed of the music to align beats When the beats of the music of the CD you wish to match is fast compared to the tempo of the other music rotate the jog wheel counter clockwise to the left When the CD is behind rotate the jog wheel clockwise to the right The pitch changes temporarily while the jog wheel is rotated The faster you rotate the wheel the more pitch is changed Releasing the wheel results in a return to the original pitch 10 Pitch Range actives the pitch slider and adjusts the amount of control the pitch slider has on the overall speed of music Tapping the pitch will toggle slider between 8 and 16 pitch ranges Holding the pitch for 3 seconds will deactivate the pitch control 11 Pitch Range LEDs indicate current pitch range When both LEDs are off the pitch slider is not active 12 Pitch Slider By moving the slider in the direction the speed of the music permanently speeds up By moving the slider in the direction the speed of the music permanently slows down To match the speeds of two CDs you can adjust the pitch When the tempo of t
18. r to the line inputs of your mixer 6 Connect IEC power cord to appropriate power source AUDIO CABLE POWER SUPPLY LINE VOLTAGE SELECTION 115V 1 The desired voltage may be set with the VOLTAGE SELECTOR switch on the rear panel of the unit 2 Do not move the VOLTAGE SELECTOR switch with excessive force as this may cause damage 3 If the VOLTAGE SELECTOR switch does not move smoothly contact a qualified serviceman 230V DIGITAL OUTPUTS This CD player is specially equipped with digital outputs The format is type 2 form 1 also known as S PDIF Sony Phillips Digital Interface Format When the digital output is used the variable pitch slider and pitch bend buttons or pitch wheel should not be used Note If digital information is allowed to change in pitch other devices may not read the digital output properly Numark The Leader in DJ Technology 2001 Numark Industries 5 http www numark com CDN25 FRONT PANEL FEATURES 1 Open Close Press to load or eject the disc The tray will not open if a disc is in play The tray door will automatic close in 30 seconds if left open This is to protect the tray from accidental damage while open 2 Single toggles the unit to play back just one track at a time single or play continuously through all tracks and then start over repeating the CD infinitely continuous 3 Time switches the time modes on the display between elapsed playing time remaining time on the track
19. reflects this allocation of risk and the limitations of liability contained in this Limited Warranty The agents employees distributors and dealers of NUMARK are not authorized to make modifications to this Limited Warranty or make additional warranties binding on NUMARK Accordingly additional statements such as dealer advertising or presentation whether oral or written do not constitute warranties by NUMARK and should not be relied upon How does state law apply to this warranty SOME STATES DO NOT ALLOW THE EXCLUSION OR LIMITATIONS OF INCIDENTAL OR CONSEQUENTIAL DAMAGES OR HOW LONG AN IMPLIED WARRANTY LASTS SO THE ABOVE LIMITATIONS OR EXCLUSIONS MAY NOT APPLY TO PURCHASER This Limited Warranty gives you specific legal rights You may also have other rights which vary from one jurisdiction to another RETURN INFORMATION e A Return Authorization number must be obtained from Numark through the address or phone numbers below e A copy of the original sales receipt must also be included for the equipment to be repaired under warranty e The faulty equipment must be packed in its original packaging e One additional outer layer of packaging must be included to ensure product safety Failures to do so may inadequately protect the equipment in transit and therefore jeopardize the customer s warranty Numark will not accept COD shipments and no call tags will be issued for merchandise return e Numark will not return repaired merchandis
20. rvicing instructions in the literature accompanying this appliance CAUTION FOR USA amp CANADIAN MODELS ONLY TO PREVENT ELECTRIC SHOCK DO NOT USE THIS POLARIZED PLUG WITH AN EXTENSION CORD RECEPTACLE OR OTHER OUTLET UNLESS THE BLADES CAN BE FULLY INSERTED TO PREVENT BLADE EXPOSURE WARNING To reduce the risk of fire or electrical shock do not expose this appliance to rain or moisture Electrical equipment should NEVER be kept or stored in damp environments NOTICE CONCERNING FCC REGULATIONS This equipment generates and uses radio frequency energy and may cause interference to radio and television reception if you do not operate it in strict accordance with the procedures detailed in this OPERATING MANUAL This unit complies with Class B computing device rules in accordance with the specifications in Sub part J or Part 15 of the FCC Rules which are designed to provide reasonable protection against such interference in a residential installation There is no guarantee however that interference will not occur in a particular installation If the unit does cause interference to any radio or television reception try to reduce it by one or more of the following means a Reposition the other unit and or its antennae b Move this unit c Move this unit and the other unit s further apart d Plug this unit into a different AC outlet so that it is on a different circuit from the other equipment This note is in accor
21. u adjust the pitch other devices may not read the digital output properly because the sampling rate changes Numark The Leader in DJ Technology 2001 Numark Industries 8 http www numark com CDN25 DISPLAY FEATURES pat eco 00 00 TOTAL TRACK aju m DE i CONTINUOUS Asi lt lt de gt gt TOTAL EAS THT 101 Do LIL PITCH 1 CUE Flashing when the unit is setting a cue point Lit continuously when the unit is paused at a cue point PAUSE II Active when the unit is paused PLAY gt Active while the unit is actually playing a CD TRACK Shows the track that the unit is playing TOTAL indicates when total CD remaining tracks are displayed MINUTES Shows the minutes elapsed or remaining depending on mode setting SECONDS Shows the seconds elapsed or remaining depending on mode setting FRAMES The CD Player breaks down a second into 75 frames for accurate cueing This shows the frames elapsed or remaining depending on mode setting 9 SEARCH indicates when the unit is searching through the music 10 CONTINUOUS PLAY Shows when the unit is set to play back the entire CD without stopping between tracks 11 SINGLE PLAY Shows when the unit is set to play just one track at a time 12 CD IN indicates a standard CD is in the unit 13 TIME BAR Shows either track elapsed time remaining track time or remaining total time depending on the setting of the time button TIME MODE
Download Pdf Manuals
Related Search