Nokia 9400 S User's Manual
Contents
1. Owner s Manual MEDIAMASTER 9400S NOKIA CONNECTING PEOPLE MEDIAMASTER 9400S Contents FOR YOUR SAFETY 4 The Radio button 15 Rear panel 4 Volume level 15 Front panel 5 List of TV channels 15 INSTALLATION OF THE MEDIAMASTER 5 Listof Radio channels 16 Connecting the Mediamaster to the Video recorder 16 satellite dish 6 Subtitling and Teletext The TEXT Button 16 Connecting the Mediamaster to a TV set 6 SETTING FROM THE MAIN MENU 16 Connecting to a TV and a video recorder 7 IV channels and radio channels 17 If your VCR does not have a SCART TV Guide and Radio Guide 17 Connector 7 Edit Channels 17 Connecting to an analogue satellite Rearrange List 18 receiver and a video recorder 7 Rename List 18 Connecting to Hi Fi system g Add channels 18 Preparing the remote control g Lock channels 18 Before you continue g Rearrange channels 19 REMOTE CONTROL 9 Remove channels 19 BASIC SETTINGS 10 USER PREFERENCES 19 Tuning procedure when RF Parental control 19 Connections are used 19 Language settings 20 The Welcome Menu 41 System settings 20 Language settings 11 On Off Timer setting 21 Antenna Satellite configuration 11 GAME 21 Automatic channel Search 12 INSTALLATION SUBMENUS 22 Manual channel Search 43 Antenna Satellite configuration 22 VIEWING TV 13 Automatic channel search 22 General information 13 Manual channel search 22 TV screen format 14 Advanced channel search 22 Start stop watching TV 14 Reinstall 23 Select channel 14 System Inf2. mode by pressing the TV button again Volume Level Increase or decrease the sound level by pressing the and buttons A control bar will be displayed at the top of the screen during level adjustment The max level for volume is the current volume setting on the TV set Please note that the volume adjustments also change the volume level of to your VCR during recording It is possible to turn the sound on and off with the button x Sound off is indicated with the same symbol on the screen If you turn the volume off with this button it does not affect the volume of the VCR during recording The current volume level will be remembered when you go to standby mode List of TV Channels While viewing the TV you can see a programme list on the screen by pressing the OK button You can change to another channel by pressing the UP DOWN buttons and then pressing the OK button To move faster 8 channels at a time between channels you can also use the DOUBLE ARROW buttons GB 15 List of Radio Channels While listening to radio Programmes you can see a programme list on the screen by pressing the OK button You can change to another channel by pressing the UP DOWN buttons and then pressing the OK button To move faster 8 at the time between the channels you can also use the DOUBLE ARROW buttons Video Recorder With a Video Cassette Recorder VCR connected you can watch record video tapes If your VCR is con
3. temperature Supply Voltage Power Consumption Max Power Consumption in Standby Dimension W x D x H Weight 15200baud max RC4661 10 meters 2x 1 5V AAA 10 C to 45 C 40 C to 70 C 96 264V AC 48Hz 60Hz 26W at 500mA LNB Load aw 380x270x70 mm 3 4 Kg MENUS SCREEN STRUCTURE First Time Installation Language Settings 1 Menu Language Antenna Satellite Automatic Configuration Channel 1 Antenna Alternative Search 2 Satellite Name 1 Antenna 3 Switch 2 Predefine Installation 1 Antenna Satellite 2 Main Audio Lang 2 Automatic Chann 3 Alternative 3 Manual Channe 2 iss 4 Main Menu 1 TV Channels 2 Radio Channels 3 TV Guide 4 Radio Guide 5 Edit Channels 6 User Preferences 7 Game 8 Installation 5 Edit Channels lt All TV 1 Rearrage List 2 Rename List 3 Add Channels 4 Lock Channels 5 Rearrange Channels 6 Remove Channel On Off Timer Setting On Off Time List 1 Timer Defined 2 Timer Defined Das 8 Timer Defined System Information 1 TV Channels Radio ALL TV 1 Hitliste 2 CNN Radio 3 1V4 5 User Preference 1 Parental Control 2 Language Settings system Settings 4 On Off timer Settings Parental Control 1 Receiver Lock 2 Lock Installation Menu 3 Age Limit 4Change Access Code Language Settings 1 Menu Language 2 Main Audio Language 3 Alternative Audio Language 4 Display Subtitles 5 Main Subtitle Language 6 Alternative Subtit
4. to prevent e g your children from watching Select the channel you want to lock and press the OK button A locked channel will be marked with a padlock symbol Repeat the procedure for each channel you want to lock When you lock a channel in any list the channel will automatically be locked in all other lists When watching TV you will be asked to enter your access code before you can watch a locked channel GB 18 Rearrange Channels ro ee You can arrange the order of channels within your favorite lists To rearrange channels select the channel which you want to move using the OK button Move the channels to the desired position using the UP DOWN button and press OK Remove Channels From here when the All TV list is selected in the Edit Channels menu you can remove channels Please note Channels deleted this way will be permanently removed The only way to get them back is to perform a new channel search To remove channels Select the channel that you want to delete and press OK You will be asked if you really want to remove it If so confirm by pressing OK once more If not press BACK PIOR la USER PREFERENCES From here you can change the menu language You also have access to the Parental Control and the Appearance menus Parental Control PIOR E By pressing OK on the line Parental Control you will be requested to enter your access code Personal Identification Cod
5. will be erased To exit the Reinstall menu without erasing any channels press Back FE anmanmi ni ka az peers cB percer acing reas CK Fa pma zi Ld EJ E Li or BA Cancel System Information This gives general information about which hardware and software version your Mediamaster is running on Tp Wie lke rad aE otters Verrem 7 32 35 Fiaderg Waaa fd Qe B BH E n Ei og here the spar iniri inc GB 23 GLOSSARY OF TERMS AGC Acquisition Gain Control Audio system With digital satellite reception the sound is transmitted in packages and is elected either in a special audio mode or pre selected by using the installation set up This makes it possible to select between several different languages in a film The number of choices is dependent on what is available in the signal DiSEqC Digital satellite Equipment Control The outdoor unit comprises the antenna one or more LNBs polarizers and external components DVB The Digital Video Broadcast group was created to establish a technical frame work for the introduction of digital video broadcasting systems EPG Electronic Programme Guide A software that enables viewers to navigate easily among the large number of channels provide by digital technology in order to select the service they desire FEC Forward Error Correction Correction of faulty bits in the received signal GHz The prefix giga means billion and Her
6. you change channel you will receive information for 4 5 seconds about the current programme This information includes Channel number name programme title and time for present and following programmes Press i while watching a channel If your Service Provider transmits programme information you will see Correct time a small amount of information for the current and next programme the name and number of the channel and finally the start and finish time for the programme If you want to get more detailed information press once more while the information box banner is shown You will get extended information if transmitted about the current or next programme GB 14 TV Guide By pressing the GUIDE button you obtain access to the TV Guide which gives the titles of the current programmes on the different channels By pressing the LEFT or RIGHT button you also can also obtain information about the next programme The minimized viewing window also helps you to select channels and information Use the Up Down buttons to move the cursor to different programme areas You can obtain extended information for a programme by pressing the I button The Radio Button The display on your Mediamaster and on the TV screen will show the name of the audio channel you are listening to While in audio mode you can press the i button to get extended information if transmitted about the audio programme Return to TV
7. 0 V AC input lvideo input of the signal output fora conventional 50 Hz F connector TV set TV set TV aerial LNB output AUX SCART AUDIO L R TVIVCR Satellite signal IF output For connection to a Stereo outputs for For an RF Cable with loop through For VCR or an analogue connection to a HiFi to the aerial connection to the other satellite receiver system input of the TV satellite receiver if needed or VCR GB 4 Front panel Power Up Down To turn the receiver Select channel number on off standby up down Display Shows channel number remote control signal and time in standby mode At start up it displays the model number INSTALLATION OF THE MEDIAMASTER The box for your Mediamaster should contain the following items Mediamaster 9400 S includes Bedienungsanleitung Owner s Manual Mode d emploi MEDIAMASTER 9450S RF Cable RCA Cable Owners Remote Controller Manual and Batteries About the SCART sockets e The rear panel of the Mediamaster is equipped with 2 SCART sockets When you connect other products to any of these sockets Y PTT MTT W always use fully featured SCART cables as supplied There are P P P q T P POT Y TPE less well specified SCART cables on the market and picture quality could be reduced if you use them e SCART cables are also necessary to get stereo sound from a stereo TV and video recorder GB 5 Connecting the Mediamaster to the satellite dish Inst
8. alling the satellite dish Your satellite dish should be installed with a cable for you to connect to the Mediamaster If you do not have this cable V you will need to buy one from a dealer tell the dealer you need a coaxial cable and F connectors e Connect the cable from the satellite dish to the socket marked LNB IN on the back of the Mediamaster Mediamaster If you need to fit the F connectors onto the cable Prepare each end of the cable as shown in the diagram You will need to fold back the outer braid as shown 15mm zs e Slide the F connector onto the cable and then turn it ERG _ 8mm clockwise until it grips the braid F connector Ensure that 3 mm of the core is protruding from the end of L h the connector 3mm Connecting the Mediamaster to a TV set There are many different types of TV VCR and other equipment that you can connect to the Mediamaster In this manual you will see some of the most common ways to connect your equipment If you use RF cables you will have to tune your TV and VCR to the Mediamaster output channel If you have problems with your connections and need help contact your dealer or Service Provide e Connect the SCART cable between the main SCART socket on the TV and the TV SCART socket on the Mediamaster e Connect an RF cable from the TV VCR output on the Mediamaster to the RF input socket on the TV e Connect the TV aerial to the TV AERIAL input socket on the Media
9. desired position using the UP DOWN button and press OK Rename List PIOR Ea You can change the ist name with the virtual keyboard cUEUFTECEEEFEETE on the screen Type in the text you want using ule ole 7 PCP control arrow keys Please note that the All TV All Radio e i sj u viw x v xj t svja 2 1 1 Free TV and Free Radio can not be changed L nenn ue Delete the existing characters by pressing OK on the left arrow Praes OK t arte the lecto sharalar key of the keyboard Select the characters using the LEFT and E RIGHT buttons Press the OK button to enter the text selected To save the renamed list press the BACK button To select various characters press OK on the page UP DOWN box of the keyboard Add Channels From here you can create your own favorite lists containing the channels you watch most frequently You can give each list a specific name in the Rename List menu When a favorite list is selected you see only those channels defined in the list You can add channels to your Favorite Lists from the All TV All Radio Free TV and Free Radio list A channel is added by pressing the OK button The V marking to the right on a line contains added channels Lock Channels PIOR E To get to this menu you need an access code The default access code is 1234 From here you can lock and later unlock channels in any of the lists in order
10. e This code is set to 1234 by the factory You will then get the menu from where you can lock some functions in the Vent nasiran look ser Mediamasier Receiver lock If you select On you will have to enter the access code every time you start the Mediamaster from stand by Lock Installation Menu If you select On you will have to enter the access code every time you enter the installation menu Age Limit If you want everybody to have access to all available types of programmes select Off If you select On you may block programmes unsuitable for children Select an age limit between 4 and 18 years on the line that appears However you should be aware that not all Service Providers have the necessary codes for these functions implemented in their transmissions GB 19 Change access code From here you can change the access code from the standard 1234 DO NOT FORGET IT Without it you do not have access to any of the functions where the code is required If you forget it you have to contact an Authorized Nokia Service Center to get help Language Settings PIO A From here you can change the language for the menus main audio language and alternative audio language System Settings From here you can adjust settings concerning your TV TV Screen Format Select your TV screen format The 4 3 format is the standard format for most TV screens Select 16 9 for a wide screen TV Output Selection If
11. e Analogue receiver In order to switch the signal from the dish between the analogue and digital receivers you need a Universal Twin LNB Cable A between output A on the LNB to the LNB socket on the analogue receiver Cable B between output B on the LNB to the ANTENNA socket on the Mediamaster Both the VCR and the analogue satellite receiver must be tuned to different UHF channels than the Mediamaster when using RF connectors GB 7 Connecting to Hi Fi system Connect an RCA Cinch stereo cable from the AUDIO L R sockets on the Mediamaster to the LINE AUX SPARE or EXTRA input sockets on your Hi Fi system Preparing the remote control Remove the cover on the battery compartment at the bottom of the remote control handset e Insert the 2 x AAA 1 5 V batteries as shown in the diagram taking care to observe the and markings indicated inside Replace the cover Before you continue Please read this information concerning menus A menu is a field of text shown on the TV screen These menus contain different kinds of information and give the possibility to select between alternatives At the bottom of the screen you will normally also see a short explanation of your options A menu may contain several lines Selectable lines are highlighted Non highlighted lines are not selectable GB 8 REMOTE CONTROL This section describes how to operate the Mediamaster using the buttons on the remote cont
12. e information from the TV Radio channels Step to different channel numbers with the UP DOWN buttons If you stop on a highlighted line and press OK you will exit the menu and enter the highlighted channel Select information about the next programme with the RIGHT button Use the i button to get extended information about a marked programme Please note that information will only be shown if it is included in the transmission Edit Channels Po oe Lu MT t D lt a h GIE L lt 5 f m4 T lc DTE il Lb T Le T B um From this menu you can rename favorite lists add channels remove channels and arrange the channels in a preferred order The All TV list displays all channels which you captured from the channel search operation in the installation menu Chenge the eren al venit ini The All TV list can contain hundreds of channels By creating Ew alee your own favorite lists you can make channel handling a bit more convenient E T i I L LI i L z E san Leg nj PEE X y m ui HE ee J 3 T a d l 9 m B 1 i z i 5 Bp ed ri il s z q uu EN Sl 3 i FEE 4 1 a fom mrri idr GB 17 Rearrange Lis a If you have created several Favorite lists you can determine the sequence in which the lists will appear To rearrange channels select the list which you want to move using the OK button Move the channels to the
13. e VCR is not setto cables switch the VCR to the channel the channel tuned for digital for digital satellite TV If you have not satellite TV tuned in the VCR you may do this first Please see the VCR manual for instructions GB 25 TECHNICAL SPECIFICATION Transmission Standards DVB MPEG2 LNB Tuner input Connector Input frequency Max Current Supply Voltage DiSEqC RF Impedance Demodulator QPSK oymbol rate SCPC and MCPC Video decoder 2 x F type Loop Through 950 2150MHz 500mA max 13V 18V 1 0 75 ohm 2 45 Msym s MPEG 2 Main Profile Main Level Data rates Video formats Audio decoder MPEG 2 layer 1 amp 2 up to 15Mbit s 4 3 letterbox 4 3 Pan amp Scan 16 9 Stereo Mono Dual channel Joint stereo System resources Processor CPU RAM MPEG RAM Flash ROM Resolution OSD RF Modulator Output Channel Output Signal Input Output Connectors Preset Channel GB 26 108MHz MIPS 32bits 2Mbytes 2Mbytes 2Mbytes 720 x 576 16 colors 21 69 PAL B G IEC169 2 male female 43 TV SCART RGB CVBS Audio AUX SCART CVBS Audio Audio Output Hi Fi 2 RCA Jack Serial Data 9pin D sub RS232C signal Baud rates Remote Controller Type Operating distance Batteries Rear Panel Interfaces LNB IF IN OUT RF modulator IN OUT 2 X SCART for TV and AUX 2 x RCA Audio L R 1 x RCA Video CVBS RS232C 9pin D Sub General Data Operating Temperature Storage
14. elcome Menu To install the Mediamaster properly you have to adjust a few settings You will always be guided by the information at the bottom of the menus When you have finished the final part of the setup procedure you can start watching TV channels and listening to radio channels Now you should have the Welcome Menu on the TV screen Press the OK button to proceed Language Settings Select the menu language that you desire This will define the language shown in the menus This will also be the main language for all the other parts such as audio and subtitling languages Press OK to proceed Installation In order to configure your equipment satellite dish and LNB you will need to use the following menus The LNB is the receiving unit which is mounted on the satellite dish For the following setup procedure you have to know the Local Oscillator LO frequency valid for your LNB s Antenna Satellite Configuration Highlight Antenna Satellite Configuration and press the OK button You can configure the antenna for each satellite from this menu Antenna Alternative Select an Antenna alternative from 1 to 16 Please note that the parameters in the menu are pre programmed but you can change any of them to suit your combination Select alternative antenna EUI GB 11 Satellite name From here you can select a name for the configuration Switch Type There are in principle two kinds of external DiSEqC switche
15. f you enter the wrong number erase it with the left arrow button Polarization Select polarization Horizontal or Vertical Symbol Rate Msym S Enter the rate with the numbered buttons FEC Enter the appropriate Forward Error Correction FEC value or select Auto Network Search Select Yes to search from all transponders used by a specific Service Provider OST Yes is the default setting Select No to search only from the transponder that you have entered on the line Transponder Frequency Useful if you do not want to search through all transponders for a specific program distributor fy cheered 17 RADHA chore bed By pressing the OK button you can now enter the channel search menu where the Mediamaster starts to search for channels from the satellite VIEWING TV General Information The following will describe the basic functions of your Mediamaster while watching TV or listening to radio channels Sometimes the information may not be displayed as illustrated Many of the functions described here are dependent on the Service Provider and or can only be used if they are included in the transmitted programme information Please note that during the Channel Search procedure the Mediamaster has downloaded ALL available channels This may include channels from various Service Providers also those to which you normally do not have access If you select a programme to which you do
16. h an RF cable To tune your TV to the RF signal you might also need your TV manual in addition to this manual The steps below explain what to do if you have been unable to use SCART cables in your connection Plug in your Mediamaster Tuning your TV to the Mediamaster Select a channel number on the TV that is not currently used for other TV channels Follow the instructions in your TV manual to tune the TV channel selector to UHF channel 43 this is the Mediamaster s factory preset UHF channel If you are already using this channel select another non occupied UHF channel between 21to 69 on the TV e When you have correctly changed the UHF channel number you will see the Welcome menu on the TV screen If there is interference from other channels you will have to change the chosen UHF channel Follow the instructions in your TV manual to store this UHF channel as the channel used by your Mediamaster You will have to select this channel when you want to watch digital TV Radio channels e Once the welcome message is visible press the OK button on the Mediamaster s remote control to start the installation procedure If for some reason you have to change the RF channel later you can do this by using System Settings menu further on in this manual If you have a VCR connected it must be tuned to a different UHF channel between 21 to 69 than the Mediamaster You may now proceed to The Welcome Menu GB 10 The W
17. he screen SCART cables and the TV is not cables switch the TV to the after you switched on in AV EXT mode appropriate AV input the Mediamaster for the first time The system is connected by RF If the system is connected by RF cables and the TV is not set to the cables switch the TV to the channel channel tuned for digital satellite for digital satellite TV If you have not TV tuned in the TV you may do this first Please see the TV manual for instructions You can also change the RF channel in the Mediamaster oee TV settings There is interference The system is connected by RF Change the Mediamaster output on your digital satellite cables and the output channel of channel to a more suitable channel channels an existing the Mediamaster interferes with an between 21 69 or connect the system terrestrial channel or existing terrestrial channel or by SCART cables video signal video signal You made a video The Mediamaster was not left on If you make a recording from digital recording of a digital the appropriate channel satellite TV your Mediamaster has to satellite channel and be left on the channel you want to the whole or parts of record the programme were The system is connected by If the system is connected by SCART not recorded SCART cables and the VCR is not cables switch the VCR to appropriate in AV EXT mode AV input The system is connected by RF If the system is connected by RF cables and th
18. le Language System Settings 1 TV Screen Format 2 Output Selection 3 UHF Channel Number 4 RF Modulator Type 5 Information Box Time out 6 Display Volume Indicator 7 Date Setting dd mm yyyy 8 Time Setting hh mm 9 GMT Offset Channels lt ALL Radio gt Dee 4 Radio Guide lt Free Radio gt 8 Installation 1 Antenna Satellite Configuration 2 Automatic Channel Search 3 Manual Channel Search 4 Advancd Channel Search 5 Reinstall 6 System Information Antenna Satellite Configuration 1 Antenna Alternative 2 Satellite Name 3 Switch Type 4 LNB Type 5 LNB Frequency 6 22KHz Tone Switch Automatic Channel Search 1 Antenna Alternative 2 Predefined Channel 3 Search Type Manual Channel Search 1 Antenna Alternative 2 Transponder Freq MHz 3 Polarization 4 Symbol Rate Msym S 5 FEC 6 Network Search Advanced Channel Search 1 Antenna Alternative 2 Transponder Freq MHz 3 Polarization 4 Symbol Rate Msym S 5 FEC GB 27 0 8 LLL SS ee eS SS SS Ep eee ee Nokia is a registered trademark of Nokia Corporation www nokia com 66 76967 10 eS KQX1A668Y
19. master Mediamaster GB 6 Connecting to a TV and a Video recorder Refer to your video recorder manual for full instructions e Connect one SCART cable between the main SCART socket on the TV and the TV SCART socket on the Mediamaster e Connect another SCART cable between the VCR and the AUX SCART socket on the Mediamasier Connect the RF cable from the RF output on the VCR to the TV aerial input on the TV Connect the TV aerial to the RF input socket on the VCR If Your VCR does not have a SCART connector e Connect a SCART cable between the main SCART socket on the TV and the TV SCART socket on the Mediamaster e Connect an RF cable from the RF output on the VCR to the TV aerial input on the TV e Connect an RF cable from the TV VCR output on the Mediamaster to the RF input socket on the VCR e Connect the TV aerial to the TV AERIAL input socket on the Mediamaster Connecting to an Analogue satellite receiver and a Video recorder Med Nokia Smart SCART socket on the TV and the TV SCART Priority Switch e Connect a SCART cable between the main socket on the Mediamaster e Connect a SCART cable between the VCR and the AUX SCART socket on the Mediamaster e Connect an RF cable from the RF output on the VCR to the TV aerial input on the TV e Connect an RF cable from the RF output on the Analogue receiver to the RF input socket on the VCR Connect the TV aerial to the RF input socket on th
20. mote control Mediamaster has pre programmed Antenna Satellite parameters for Astra HotBird Arabsat NileSat PanAmsat 4 AsiaSat2 AsiaSat3 TurkSat1B TurkSat1C and Other1 to Other7 Antenna Alternative Select the option 1 to 16 that corresponds to your antenna system Predefined Channel Each antenna alternative has one or two pre programmed channel parameters Choose a channel from which you want to start the channel search Normally each of the pre programmed channels gives the same result Search Type Select Free Channels in order to search for free channels only Select All Channels in order to search all channels on the satellite GB 12 Manual Channel Search You can use manual channel search if you want to add new channels later For example If you have a special antenna configuration which is not assigned in the Antenna alternative menu you can add new channels using the manual channel search function When you perform a Manual Search you first need to enter some parameters for the channel search to work The information you need to enter in this menu is available in magazines covering satellite TV reception on the Internet or from your Service Provider Antenna Alternative Select Antenna Alternative 1 to 16 that corresponds to the antenna which you wants to use for the search Transponder Freq MHz Specify the frequency in GHz using the numbered buttons on your remote control I
21. nected with a SCART cable and you press the start button on the VCR the playback will start and interrupt the TV programme from the Mediamaster To watch TV programmes again press the TV button or stop the VCR Please note that during the recording of a programme everything shown on the screen will be registered For example If you call up a Menu from the Mediamaster on the screen the menu will be recorded Subtitling and Teletext The TEXT Button Pressing the TEXT button once while watching TV enables the teletext output to the TV To enable the teletext display on the TV press the Teletext button on the TV s remote control This is only possible if more than one subtitling language is being transmitted Please refer to the instruction manual of your TV for the teletext function Exit the menu by pressing the TV button SETTING FROM THE MAIN MENU Press the MENU button and you will get the Main Menu on the TV screen Press the EXIT button to leave the menu If you select one of the highlighted titles and press the OK button a submenu will be shown on the TV screen From a submenu you can adjust settings to your own requirements GB 16 TV Channels and Radio Channels TV Radio Channels will show a list with the names of the different channels To move faster within the list use the DOUBLE ARROW buttons Press OK to enter a marked channel TV Guide and Radio Guide These guides will give you an overview of programm
22. not have access you will get the message Service is scrambled or not running on the screen GB 13 TV Screen Format If you have a TV set with a 4 3 picture format and the transmission is in 16 9 you can select 4 3 Pan amp Scan or 4 3 Letterbox to change display format 4 3 Pan amp Scan will fill up the screen vertically but cut off some information from the left and right sides of the picture 4 3 Letterbox will give a complete picture but leave black areas at the top and bottom You can select the TV screen format in the System setting menu which is a subsidiary of the User preference menu Start Stop Watching TV To start the Mediamaster from stand by mode press the button or one of the numbered buttons on the remote control It is also possible to start by pressing the button on the front of the Mediamaster Put the Mediamaster into stand by by pressing again the button again In stand by mode the display will show the correct time During viewing the channel number will also be displayed Select Channel Change channel with the numbered buttons or with the up down buttons on the remote control You can also use the buttons up down on the front panel of the Mediamaster You can also select TV Radio channel in the TV Radio channel list See the List of TV Channel and List of Radio Channel of page 15 and 16 Program Information The i Button Every time
23. ormation 23 Program Information the i button 14 GLOSSARY OF TERMS 24 TV Guide 15 PROBLEM SOLVING 25 TECHNICAL SPECIFICATION 26 MENUS SCREEN STRUCTURE 27 Nokia Multimedia Terminals operates a policy of continuous development Therefore we reserve the right to make changes and improvements to any of the products described in this manual without any prior notice The EMC Directive 89 336 EEC is applied to this product DISEQC is a trademark of EUTELSAT Nokia is a registered trademark of Nokia Corporation Copyright 2000 Nokia Multimedia Terminals All rights reserved GB 3 FOR YOUR SAFETY Keep a clear space around the Mediamaster to allow for sufficient ventilation Do not cover the Mediamaster or place it on a unit that emits heat Use a soft cloth and a mild solution of dish washing liquid to clean the casing Never allow liquids spray or other materials to come into contact with the inside of the Mediamaster Service should be carried out only at a Nokia authorized service center Do not connect or modify cables when the Mediamaster is plugged in Do not remove the cover Do not allow the unit to be exposed to hot cold or humid conditions Please note that the only way to isolate the Mediamaster completely from the 230 V mains supply is to unplug the mains lead Rear panel LNB input RS232 TV SCART VIDEO OUTPUT TV AERIAL POWER CABLE Satellite dish ForaPC For the audio Composite video For a terrestrial 23
24. rol some of the functions can also be carried out using the buttons on the front panel 0 EXIT TV BACK TEXT MENU GUIDE P P UA T a OK ri OPTION FREEZE NL To switch the Mediamaster in and out of standby mode To return to the viewing mode from a menu without storing settings in menu mode To switch between TV or Radio in viewing mode To turn the sound off on mute To adjust the volume of digital programmes The Mediamaster s maximum level is controlled by the TV s present volume setting To change channel and to select individual menu options Note lf O is entered as the first digit the TV Release functionality is activated see below TV Release To switch between digital TV Radio analogue TV and analogue satellite TV and VCR when your systems are connected by SCART cables Info To display short and extended information if transmitted about current and next programmes To go back one level in the menus without storing settings To select teletext information Press to enter Teletext if available To display or exit from the Main Menu screen To obtain a list of present and following programmes for the available channels This information is only shown if your oervice Provider transmits programme information EPG information To change channels up and down by one unit To change page in a menu list text if more than one page is available To browse through teletex
25. s on the market at present One for connection of two LNBs The other one for connection of up to 4 LNBs If you have the other switch defined as DiSEqC Level 1 or 2 on the market select DiSEqC 1 2 3 or 4 for each LNB connected to respective inputs on this switch LNB Type Selection is possible for different kinds of LNBs Select the frequency for the LNB which is valid for your combination You may also enter a value with the numbered buttons on the remote control The LNB alternatives are Universal which is the most common 5 150 9 750 10 000 10 050 10 600 10 750 11 200 11 475 If you have special LNB type you should select User Define on this menu And you can enter a new LNB frequency in the following LNB Frequency menu LNB Frequency You can enter a special LNB frequency which is not presented in the LNB Type list as above 22KHz Tone Switch If you have connected to a Dual LNB or two antennas connected to a 22KHz tone switch box set it to Enable the 22KHz tone switch When you have finished the settings in this menu press the OK button to save the parameter Press BACK to continue with the channel search set up You can also recall this menu later From the Main Menu select Installation and then Antenna Satellite Configuration Automatic Channel Search PIOR la Highlight Automatic Channel Search using the down arrow button on the re
26. s performed during first time installation You can also add features that were not included in the first installation Please note that helpful information for every line is given at the end of the menu ETT m EI skua Cemer Geach ee ey ees 5 PED hi L faethe pne arl the Lutz LLLA Antenna Satellite Configuration Please refer to page 11 Automatic Channel Search Please refer to page 12 Manual Channel Search Please refer to page 13 Advanced Channel Search The information needed to enter in this menu is available in magazines covering satellite TV reception or from your Service Provider e Antenna Alternative Select the satellite from which the signal is to be received e Transponder Freq MHz Enter using the numbered buttons on the remote control e Polarization Select Horizontal or Vertical Symbol Rate Msym s Enter with the numbered buttons e FEC Select Auto or the appropriate Forward Error Correction FEC value using the left right button on the remote control Video PID Enter the PID Packet Identifier for the video signal Audio PID Enter the PID for the audio signal e PCR PID Enter the PID for the PCR Programme Clock Reference GB 22 POCHE la This will start the Installation procedure from the Welcome Menu When you press OK in the Welcome Menu again be aware of the fact that all previous channels and settings
27. t history To move up down in the menus and to change channels To change settings in menus To confirm choices and selection of a highlighted item To display the TV Radio channel list Red Reserved for future application Green To select service options in viewing mode Yellow To select the freeze function Press once to freeze the screen picture Press any other key to go to normal mode again Blue To toggle between present and previous TV Radio channels GB 9 BASIC SETTINGS Once you have correctly connected the Mediamaster you also have to perform some Basic Settings During this procedure helpful information is displayed at the bottom of the menus Please note The OK button always confirms a selection within these menus and pressing it will take you to the next step in the installation process However and this is important often more than one value has to be entered in a menu First perform all necessary settings on the different lines Then confirm them all simultaneously by pressing OK You can always go back to the previous menu by pressing the BACK button Use the buttons to move upwards and downwards from one line to another Use to change settings You can also use the numeric buttons on the remote control to select a line in a menu and to enter numeric values Tuning procedure when RF connections are used This procedure is necessary only if your Mediamaster is connected to the TV wit
28. the teletext function does not work when watching channels from an analogue satellite receiver connected to the Mediamaster change this setting from RGB to Composite UHF Channel Number Select this alternative if you have to change the RF channel If you change the RF channel number you must also change it to the same value on the TV If you do not the picture will become black RF Modulator Type If the Mediamaster is connected to the TV by an RF cable you can select the RF modulator type The RF Modulator affects a channel s audio If you get picture but no sound the RF modulator selection might be wrong Select UK PAL I if the Mediamaster is used in the UK Select Normal if it is used elsewhere Information Box Timeout secs When you switch channels an information banner will be shown for a few seconds You can select for how long the banner will be shown Display Volume Indicator Select whether or not you want the volume bar to appear on the screen when you change the volume Date Setting dd mm yyyy Used to set the current date month and year Time Setting Adjust the clock GMT Offset Adjust the time difference in your country GB 20 On Off Timer Setting T ph ae You can enjoy this On Off Timer for such a convenience as wake up or automatic VCR recording Mediamaster will be automatically switched on and play specified channel for the specified time and then switched off You may specif
29. tz means cycles per second Signal in the GHz range are often called microwaves LNB Low Noise Block converter An electronic unit mounted on the satellite dish It recovers the signals reflected by the dish and converts them to signal that can be used the mediamaster MHz The prefix mega means million and Hertz means cycle per second Medimaster A unit that converts the digital satellite signal into audio and video signals The audio and video signal can be send to the TV set either via SCART or via HF modulator output MPEG Moving Picture Experts Group Body established GB 24 by the international Standards Organization to provide the basis for a picture coding and Compression system Network A number of digital channels transmitted from one source Grouped under separate headings in the channel list Parental control A feature that allows parents to lock programmes that they consider unsuitable for children A locked channel or programme can only be unlocked with the special parental access code ACCESS code Personal Identification Number A four digit code stored in the memory You can change ACCESS code on the User Preference Menu Polarization Polarization allows several programmes to be fit into the same frequency band The signal from the satellite are transmitted either with linear Vertical or Horizontal polarization or circular right or left polarization RF Radio Frequenc
30. y known as HF in some countries SERIAL RS232 A serial communication standard data port Satellite dish A dish shaped antenna reflector that receiver signals from a satellite The dish focuses the signals into the LNB SCART A 21 pin connector used for connecting the Mediamaster VCR and TV Also named Euroconnector or Peritel connector Symbol rate Size of the digital package transmission S W Software Program code PID Packet Indentifier PCR Program Clock Reference BER Bit Error Ratio PROBLEM SOLVING The display on the Mains lead is not connected Check that the mains lead is front panel does not plugged into the power socket light up is not lit No sound or picture The satellite dish is not pointing Adjust the dish Check the signal at the satellite level indicator in one of the channel search submenus No signal or weak signal Check the cable connections LNB and other equipment connected between the LNB and the receiver or adjust the dish The LNB is faulty Replace the LNB Bad picture blocking The satellite dish is not pointing at Adjust the dish error the satellite Signal too strong Connect a signal attenuator to the LNB input Satellite dish is too small Change to a larger dish LNB noise factor too high Change to an LNB with lower noise factor The LNB is faulty Change the LNB There is no Welcome The system is connected by If the system is connected by SCART menu on t
31. y up to 8 separate lists with turn on time date duration channel and occurrence options Time Setting You can select the operation mode of the On Off timer by pressing LEFT RIGHT button on the remote control e Once The Mediamaster will be switched on off for the ER specified time only once Daily The Mediamaster will be daily switched on off for the specified time Weekly The Mediamaster will be weekly switched on off for the specified time Off Cancel the operation of On Off timer Channel Name You can select channel from the TV or Radio list by pressing LEFT RIGHT button on the remote control oelect a channel you want to play and press OK On Time You can select time date or day depending on your selection in Time Setting menu The Mediamaster will be switched on at the On time Duration hh mm Mediamaster will keep playing for the time specified in this Duration For example if you set 00 30 Mediamaster will be switched off 30minutes after switched on SOKOBAN To start the game select the game level by using the LEFT and RIGHT button and press OK button on the remote control You can control the segment by LEFT RIGHT UP DOWN button on the remote control To finish the game press EXIT or BACK button on remote control INSTALLATION SUBMENUS Select this Menu from the line Installation in the Main Menu The submenu will give you the opportunity to change the e preference
Download Pdf Manuals
Related Search