Nikon AUTOFOCUS SB-28D User's Manual
Contents
1. 28 Des660 80 28 For the lens focal length and aperture in use make sure your subject is within the distance indicated on the Speedlight s LCD panel2. When using the flash off camera with a dedicated sync cord Aim the flash directly at the subject Aiming the flash incorrectly can cause over or under exposure Q Be careful not to cover the sensor on the Speedlight This can produce unexpected results Refer to the DCS 600 Series User s Manual included on the documen tation CD or the SB 28 instruction manual included with your Speedlight EASTMAN KODAK COMPANY k Rochester New York 14650 Eastman Kodak Company 2000 Kodak and Kodak Professional are trademarks Printed in U S A P N 4E1562 5 00 NIKON Autofocus SB 28D and SB 28DX Speedlight Using with your KODAK PROFESSIONAL DCS 600 Series Camera General guidelines for using the SB 28D SB 28DX Speedlight with your DCS 600 Series camera Use the Sub Command dial not the lens aperture ring to set aperture Using the Sub Command dial assures that the Speedlight receives the lens aperture setting Set Flash mode to Auto Aperture TTL auto flash is NOT recommended The automatic exposure control range of the SB 28DX Speedlight is partially determined by the selected ISO speed on the camera Closer subjects may require lower ISO settings The following table specifies the widest aperture recommended for each camera s minimum ISO Mnn Maximum ISO Aperture pes620x 400 f4 pes620 200 1
Download Pdf Manuals
Related Search