Netgear WG302v1 Application Note
Contents
1. NETGEAR Connect with Innovation WG302 Point to Point Bridging Use and Configuration CONFIGURATION How to set up the access points The layout for this example will use WG302v2 access points All the devices must use the exact same settings with the exception of their IP address same SSID same channel same encryption etc CONFIGURATION First unit Once this access point has its basic configuration set and you ve confirmed it to be working properly go to the Access Point Settings section and enable wireless bridging and repeating select Wireless Point to Point Bridge and enable Wireless Client Association If you want stations to be able to connect to this particular access point Advanced Access Point Settings Access Point Mode Enable Wireless Bridging and Repeating Wireless Point to Point Bridge Enable Wireless Client Association Remote MAC Address H In the Remote MAC address field put the MAC address of the other access points you ll be able to find the MAC address of each access point underneath the device on its tag Or alternatively in the General section of the GUI General Access Point information Access Point Name netgear6f36a2 MAC Address 00 14 6c 6f 36 a2 Country Region ireland Firmware Version 4 2 17 Access Point Mode Access Point VLAN 802 1Q Disable Management VLAN ID 1 CONFIGURATION Second unit Once this access point has its basic con2. figuration set and you ve confirmed it to be working properly go to the Access Point Settings section and enable wireless bridging and repeating select Wireless Point to Point Bridge and enable Wireless Client Association If you want stations to be able to connect to this particular access point Advanced Access Point Settings Access Point Mode Enable Wireless Bridging and Repeating Wireless Point to Point Bridge Enable Wireless Client Association Remote MAC Address In the Remote MAC Address field insert the MAC address of the FIRST unit TESTING Verifying the connection To verify this connection try connecting wirelessly to the main unit and using the ping DOS command to the IP address of the other access points If the replies are successful you ll know the configuration was successful
Download Pdf Manuals
Related Search