NEC ST-SC40 User's Manual
Contents
1. NEC TABLE TOP STAND vecssceeeteetteeeeeeeeneeneanees ST SC40 Installation Instructions We greatly appreciate your purchase of this NEC M Series Monitor Table top stand Read these instructions and M Series monitor User s manual carefully to ensure proper usage This product is designed for use exclusively with the following M Series Monitors M Series M40 M Series M46 Materials included in two packages Package 1 Stand Installation instructions Package 2 Bracket Screws M4X10mm 8 Screw package is taped to inside bezel Screws M4X16mm 2 Safety Precautions A note on symbols used herein Be sure to read the following descriptions carefully before installing AN Warning Items marked with this symbol indicate items containing instructions which if ignored or improperly followed might result in death or bodily injury Caution Items marked with this symbol indicate items containing instructions which if ignored or improperly followed might result in bodily injury or damage to property Z When installing your M Series monitor be sure to have it installed correctly in accordance with the instructions given herein Improper installation may cause the M Series monitor to tip over and this in turn might result in bodily injury Be sure to follow the assembly instructions in the order they are given and to firmly screw in all screws in their designated locations Failure to follow instructions might c2. protective sheet 4 Attach bracket to stand 5 Slide the stand assembly into place making sure that the inside tabs located on the left and right of the stand are placed into the corresponding slots on the display Figure 1 6 Tighten the screws as indicated in Figure 2 Figure 1 i Figure3 7 Tighten the 2 additional screws located at the bottom of the stand Figure 3 ie Circles indicate screw location 8 screws M4X10mm Figure 2 2 screws M4X16mm under stand AS Se F i CAUTION Handle with care when mounting M Series monitor stand and avoid pinching your fingers Specifications Dimensions W 800 x H 157 2 x D 400mm Weight 4 1kg This specifications and or design of this product may be subject to change at any time without prior notice
3. ause the monitor to tip over fall down become damaged or result in other unforeseen accidents after the M Series monitor has been installed e Never alter any of the provided components as doing so might result in the M Series monitor tipping over which might in turn result in bodily injury Never use any damaged parts or components as doing so might result in the MULTEOS monitor tipping over which might in turn result in bodily injury If you do find any damaged parts or components contact the retail store where the product was purchased for assistance e When moving the stand and M Series monitor while they are still attached together never move the stand and monitor by holding the stand alone as doing so might result in the M Series monitor tipping over which might in turn result in bodily injury A When attaching a M Series monitor to the stand be sure to hold the M Series monitor in place when doing so as failing to hold the monitor in place might result in it tipping over which might in turn result in bodily injury A When attaching the M Series monitor turn off the power to the monitor and any connected Sables and remove the power cord from the power socket before doing so Installing stand CAUTION Installing the stand must be done by two or more people How to install stand 1 Please turn monitor off 2 Spread the protective sheet on a flat surface such as a desk 3 Place monitor on the
Download Pdf Manuals
Related Search