Home

NEC NEAX 2400 IPX User's Manual

image

Contents

1. Trunk Line Appearance Trunk Provisioning Service Selection Trunk to Trunk Connection Trunk to Trunk Third Party Cancellation Uniform Call Distribution UCD Uniform Call Distribution PRI Universal Sender Uniform Numbering Plan CCIS Fm When the call is originated from PS When the call terminates to PS X Available Not available X Available with limitations NEAX2400 IPX Wireless Features and Specifications NDA 24313 Issue 1 Page 23 Variable Timing Parameters General Service Features Series 7300 Series 7400 Stand Alone FCCS Stand Alone FCCS Feature Name Fm To Fm To Fm To Fm To Virtual Tie Line Voice Call Voice Call pm Voice Call CCIS Volume Control D term Fm X Note 1 Note 2 Note 3 Note 4 Page 24 WATS Access When the call is originated from PS To When the call terminates to PS Available Not available Available with limitations Automated Attendant Terminating side is PS When the PS is Out of Zone Out of Area or in POWER OFF state the calling party encounters Busy Tone but call termination is not retried If the AUTOMATIC ANNOUNCEMENT CALLED PS OUT OF ZONE A 129 is set to the PS the calling party doe
2. Data Connection Direct Inward Dialing DID Data Connection Direct Outward Dialing DOD Data Connection Tie Line Access Data Day Night Class of Service Data Hot Line Data Hot Line CCIS Data Hot Line Outside Data Interface Automatic Answer Data Interface Automatic Answer CCIS Data Interface Automatic Answer PRI Data Interface Manual Answer Data Line Moves Additions and Changes Data Line Security Data Line Security CCIS Fm When the call is originated from PS To When the call terminates to PS X Available Not available X Available with limitations NEAX2400 IPX Wireless Features and Specifications NDA 24313 Issue 1 Page 11 General Service Features Series 7300 Series 7400 Stand Alone FCCS Stand Alone FCCS Feature Name Fm To Fm To Fm To Fm To Data Line Security PRI Data Privacy CCIS Data Privacy on Demand Data Privacy on Demand CCIS Data Privacy on Demand PRI Data Queuing Data Switching through Data Module Data Switching through Data System Diagnostic Tests Data Tenant Service Data Terminal Traffic Measurement Data Transparency
3. NEAX2400 IPX Wireless Features and Specifications Page 20 NDA 24313 Issue 1 General Service Features Series 7300 Series 7400 Stand Alone FCCS Stand Alone FCCS Feature Name Fm To Fm To Fm To Fm To Serial Call CCIS Serial Call Serial Call Loop Release Service Display CCIS ptem Service Display Service Display CCIS Service Feature Peg Count SID to Network Present SID to Network Privacy SID to Terminating User Display SID to Terminating User DTE Simultaneous Voice and Data Transmission Simultaneous Voice and Data Transmission CCIS Simultaneous Voice and Data Transmission PRI Single Digit DTE Calling Single Digit Feature Code Single Digit Station Calling Single Digit Station Calling CCIS Slumber Time Do Not Disturb SMDR for Data Call RS232C SMDR for Data Call RS232C PRI SMDR Output Expansion ANI CPN Software Line Appearance X X gt gt special Di l Tone Note 12 Note 12 Note 12 Note 12 Speed Calling Group Speed Calling Group PRI Speed Calling One Touch D Speed Calling Override System Speed Calling Override System PRI Spe
4. Existing PBX no wireless function Built in Wireless System C O Line COT STN A LC COT CSINT er oDT PS A STN B LC COT Station LC PS B Operating Procedure No manual operation is required Service Conditions 1 Only DTMF signals can be sent to the existing PBX Only one COT circuit card must be assigned for one PS 3 When an incoming call terminates from the existing PBX to a PS via the LC COT if the terminating PS is busy or out of zone call termination is performed again Note The calling party hears Ringback Tone without condition While Ringback Tone is sent the Built in Wireless System attempts the call termination to the called PS periodically and ring the PS when the PS becomes available 4 The distinctive ringing service is not provided when a call terminates to the PS 5 When the Speed Calling System Station service is activated using Overlap Dialing including the access code the number dialed may not be stored for redialing 6 Whether or not Call Forwarding services Call Forwarding All Calls Busy Line Don t Answer by the access code are available depends on the system data of the existing PBX The Call Forwarding service set by access code is activated only when the call terminates to the corresponding LC in the existing PBX 7 The CALL FORWARDING PS INCOMING CALL INCOMPLETE C 155 service cannot be set to a PS 8 When a call terminates from the existing PBX
5. Call Pickup Group Call Pickup Group Call Pickup Group D PRI Fm When the call is originated from PS To When the call terminates to PS X Available Not available X Available with limitations NEAX2400 IPX Wireless Features and Specifications Page 8 NDA 24313 Issue 1 General Service Features Series 7300 Series 7400 Stand Alone FCCS Stand Alone FCCS Feature Name Fm To Fm Fm To X gt gt Call Pickups Group PRI Note 15 Note 15 Note 15 Note 15 Call Processing Indication x X gt Call Processing Indication CCIS X X gt Call Queuing X Call Return Call Trace Call Transfer All Calls Call Transfer Al Calls CCIS Call Transfer All Calls Call Transfer All Calls D PRI Call Transfer All Calls PRI Call Transfer Attendant Call Transfer Attendant CCIS Call Transfer Attendant PRI Call Transfer Supplementary Service SS ST with Rerouting Call Waiting Originating Call Waiting Terminating Call Waiting Terminating PRI Call Waiting Answer Call Waiting Lamp Call Waiting Lamp UCD Called Number Display Attendant Called Station Status Display CCIS Called Station Status Display D Calling Name Ident
6. Manual Signaling Meet Me Paging Meet Me Paging Attendant Megacom 800 Access Megacom Access Message Center Interface Message Center Interface CCIS Message Reminder Message Reminder CCIS ptem Message Reminder Message Reminder CCIS Message Waiting Indication Message Waiting Lamp Setting Attendant Message Waiting Lamp Setting Attendant CCIS Message Waiting Lamp Setting Station Message Waiting Lamp Setting Station CCIS MF ANI to SMDR MF Signaling DID Miscellaneous Trunk Access Miscellaneous Trunk Access CCIS Miscellaneous Trunk Access PRI Miscellaneous Trunk Restriction Miscellaneous Trunk Restriction CCIS Miscellaneous Trunk Restriction PRI Modem Pooling CCIS Modem Pooling PRI Multi Channel Recording Multiple Call Forwarding All Calls Multiple Call Forwarding All Calls CCIS Fm When the call is originated from PS To When the call terminates to PS X Available Not available X Available with limitations NEAX2400 IPX Wireless Features and Specifications NDA 24313 Issue 1 Page 17 General Service Features Series 7300 Series 7
7. Flexible Assignment of Line Function Buttons Flexible Numbering of DTEs Flexible Numbering of Stations Flexible Numbering of Stations CCIS Flexible Numbering of Stations PRI ptem Flexible Ringing Assignment Flexible Routing FCCS Follow Phone Forced Account Code FX Access Group Calling Half Full Duplex Switchover Hands Free Answer Back Hands Free Answer Back CCIS ptem Hands Free Answer Back Hands Free Answer Back PRI Hands Free Dialing Monitoring Hot Line Hot Line CCIS Hot Line Outside Hot Line Outside PRI House Phone House Phone CCIS Fm When the call is originated from PS To When the call terminates to PS X Available Not available X Available with limitations NEAX2400 IPX Wireless Features and Specifications Page 14 NDA 24313 Issue 1 General Service Features Series 7300 Series 7400 Stand Alone FCCS Stand Alone FCCS Feature Name Fm To Fm To Fm To Fm To I Hold Indication I Use Indication D Immediate Ringback Tone Immediate Ringing Incoming Call Identification Incoming Call Identification CCIS Incoming Call Iden
8. CALL FORWARDING ALL CALLS assigned to a PS does not function if the PS is just engaged in data communication Accordingly if the communication is in progress the third incoming call including that by another data terminal is not forwarded to the target destination i e disconnected NEAX2400 IPX Wireless Features and Specifications Page 62 NDA 24313 Issue 1 Authorization Code psil A 137 A 137 Authorization Code psi General Description An AUTHORIZATION CODE is a numerical code dialed by PS users up to ten digits which will override the station CLASS OF SERVICE INDIVIDUAL C 15 for facility access restriction Operating Procedure Procedure 1 e With feature Access Code Go on hook and receive Dial Tone Enter the feature Access Code and receive Service Set Tone Enter the AUTHORIZATION CODE up to ten digits Receive Dial Tone SUO e 5 Enter the number to be called Procedure 2 only for LEAST COST ROUTING L 5 calls e Without feature Access Code Go on hook and receive Dial Tone Enter the number to be called If an AUTHORIZATION CODE is required the caller will receive Special Dial Tone If Special Dial Tone is received enter the AUTHORIZATION CODE up to ten digits or the call is denied Note 7e feature access code for AUTHORIZATION CODE is a maximum of three digits Sepe iS Service Conditions 1 Feature restriction classes of the following services cannot be overridden us
9. Page 52 This feature is available for Series 7300 or later software When a voice mail is received while the PS user is in conversation the system notifies the PS after the conversion ends When voice mails for multiple PS users are simultaneously received each node can notify a maximum of 240 PSs For the other PSs notification is given at the time of PS Location Registration or end of call When a notification is given at the time of PS Location Registration or end of call further notifications to the same PS are not given unless the PS user accesses the voice mail system When a notification could not be terminated to a PS because of PS Out of Zone etc the system notifies again after four minutes This service and Open Application Interface cannot be activated concurrently NEAX2400 IPX Wireless Features and Specifications NDA 24313 Issue 1 Wireless Analog Adjunct Connection W 8 W 8 Wireless Analog Adjunct Connection General Description This feature allows the existing PBX no wireless function to operate a PS as well as a station in the office Each PS is connected with the dedicated COT in the Built in Wireless system When a call is originated from the PS it terminates to the LC in the existing PBX via the corresponding COT and is handled by the existing PBX
10. Service Conditions 1 When the electric field strength becomes weak due to the D PS user moving out of the service area or entering a radio zone where all the channels of ZTs are busy or when the Error rate exceeds the threshold OUT OF CELL INDICATION is activated 2 the electric field strength becomes so weak that communication is no longer available or when Error rate exceeds the threshold the call will be disconnected automatically NEAX2400 IPX Wireless Features and Specifications Page 30 NDA 24313 Issue 1 P 61 PS Authentication P 61 PS Authentication General Description This service confirms the identity of the PS to avoid an unauthorized terminal from accessing the system Operating Procedure No manual operation is required The D PS identity is confirmed automatically by checking if the PS possesses the key information unique to each D PS This check is performed between the 2400 IPX and the D ps Service Conditions This service is activated in the following circumstances 1 2i 3 4 When the D PS user originates a call When a call terminates to the D PS When HANDOVER service is activated When the D PS registers its location to the system when idle NEAX2400 IPX Wireless Features and Specifications NDA 24313 Issue 1 Page 31 P 62 PS Location Registration P 62 PS Location Registration General Description This service allows the NE
11. 13 When this feature is set while a call is terminating to Main Station the call is not transferred to Sub Station In this case this feature is available from the next call Message Waiting Lamp control by MEASSAGE REMINDER or CMWL command is applied only to the called designated station Even if this feature is set recall to Main Station is not forwarded to Sub Station Forwarding operation of this feature is not counted in Multiple Call Forwarding features When a call is originated from Sub Station to OAI or MFC the Sub Station number is sent Interactions 1 This feature takes precedence over the Call Forwarding Do Not Disturb and Station Hunting features set to Main Station When this feature is set all the calls are forwarded to Sub Station even if CALL BLOCK C 150 is set to Main Station Off Hook Line Number Display feature of the PS is independent of this feature MW indication for Sub Station is available for My Line of the D PSII only When a Main Station is in a Station Hunting group this feature can be activated only if the Main Station is the pilot station NEAX2400 IPX Wireless Features and Specifications NDA 24313 Issue 1 Page 51 V 24 V 24 Voice Mail Indication VMI Voice Mail Indication VMI General Description This feature allows the system to notify a PS that a voice mail has been received Operating Procedure No manual operation is required Service Conditions 1 2
12. Effective Effective Ineffective Effective Note NEAX2400 IPX Wireless Features and Specifications NDA 24313 Issue 1 Effective Effective Shaded areas represent invalid configuration Effective Page 69 This page is for your notes NEAX2400 IPX Wireless Features and Specifications Page 70 NDA 24313 Issue 1 Movement of PS in NEAX2400 IPX Movement of PS in NEAX2400 IPX PCS Community The SYS ID is a unique ID which was given in order to manage the PCS system The area where the SYS ID is effective is called PCS Community Every PCS Community in a FCCS network is given a unique PCS Community Number PCN Each PCN has its own SYS ID The PCN is used in stead of the SYS ID for MAT command and this can reduce the effect upon changing the SYS ID to some measure The habitual operation of the SYS ID which reaches to nine digits for the management purpose is not needed therefore easy maintenance can be provided A single PCS Community can be assigned in multiple nodes and a single node can belong to multiple PCS Communities by using the Tenant service PS movement in the NEAX2400 IPX system is classified into four kinds as described below 1 Stand by condition movement Movement of an idle PS within the home PCN area in the home FCCS network in the FCCS network accommodating the home node The event of PS Location Registration occurs only when the PS moves over the Calling area Even if
13. General Service Features Series 7300 Series 7400 Stand Alone FCCS Stand Alone FCCS Feature Name Fm To Fm To Fm To Fm To Attendant to Attendant Calling Audible Indication Control Authorization Code Authorization Code Display Elimination Authorization Code Tie Line Incoming Automated Attendant Automatic Call Distribution PRI Automatic Change of Night Service Automatic Circuit Assurance PRI Automatic Disconnection of Data Calls Automatic Idle Return Automatic Manual Intercom Automatic Modem Pool Selection Automatic Number Identification ANI Automatic Number Identification AND CCIS Automatic Recall Automatic Recall CCIS Automatic Recall Automatic Trunk Test Automatic Trunk Test PRI Blind Transfer to Attendant Blind Transfer to Station Blocking of Trunk Usage Boss Secretary Message Waiting Lamp Control Boss Secretary Override D Boss Secretary Override PRI Boss Secretary Transfer Boss Secretary Transfer PRI Brokerage Hot Line When the call is originated from PS To When the call terminates to PS Available Not avail
14. Sub Address Addressing X gt Sub Address Present Supervisory Call CCIS Synchronous Data Switching Step Call Synchronous Data Switching CCIS Synchronous Data Switching PRI Fm When the call is originated from PS To When the call terminates to PS X Available Not available X Available with limitations NEAX2400 IPX Wireless Features and Specifications Page 22 NDA 24313 Issue 1 General Service Features Series 7300 Series 7400 Stand Alone FCCS Stand Alone FCCS Feature Name Fm To Fm To Fm To Fm To Tandem Switching of Tie Trunks 2 4 Wire Tandem Switching of Tie Trunks 2 4 Wire PRI Tenant Service Terminal Attribute Data Assignment through MAT Tie Line Access Tie Line Connection with Pad Control Three Way Calling Three Way Calling Dern Three Way Calling PRI Three Way Calling PRI ptem Time Display Timed Reminder Toll Denial Toll Diversion Toll Denial Toll Diversion PRI Toll Restriction 3 6 Digit Toll Restriction 3 6 Digit CCIS Toll Restriction 3 6 Digit PRI Tone Block Transfer Message TRM Trunk Answer from Any Station TAS Trunk Answer from Any Station TAS CCIS Trunk Group Busy Lamp
15. When programming this feature telephone numbers should be used Interactions The following features cannot be activated to a PS Station that has been set Call Park BUSY VERIFICATION CALL WAITING e ATTENDANT CAMP ON WITH TONE INDICATION EXECUTIVE RIGHT OF WAY prm NEAX2400 IPX Wireless Features and Specifications NDA 24313 Issue 1 Page 65 G 23 Group Call Automatic Conference 20 Party G 23 Group Call Automatic Conference 20 Party General Description This feature enables a PS user to call a maximum of 20 Party self other 19 members conference only by dialing a pre programmed Group Calling Conference Number If the Group Calling Conference Number is once dialed the member PSs Stations are automatically called in assigned order at the interval of every two seconds This feature also allows the Station Hunting Group Circular and the use of Phantom Telephone Number s which is available for flexible arrangement of conference member tables Operating Procedure 1 2 3 4 Note 5 Dial the Group Calling Conference Number telephone number Phantom Telephone Number of conference leader port The conference leader hears Ringback Tone When the first party conferee answers Ringback Tone stops and the conference is in progress The called parties conferees participate in the conference one after another after answering the call While the conference is in progress the called party may be rel
16. but hears Ringback Tone instead Even if a PS user moves Out of Zone while the talk between the corresponding PS and a subscriber of the Central Office line is in progress AUTOMATIC ANNOUNCEMENT DISCONNECTED PS QUT OF ZONE A 128 cannot be heard by the subscriber outside but Busy Tone is heard instead The caller continues hearing Ringback Tone Ina call where a PS is engaged a third party intrusion into this line is not available upon the activation of CALL WAITING When a call through DIT is transferred to a PS or a station upon the activation of CALL FORWARDING PS INCOMING CALL IMCOMPLETE C 155 the calling party hears Ringback Tone if the target PS or station is Out of Zone or in the lock out state e PSisunable to be handed over when it is ringing When the transceiver zone of the PS changes over the called PS stops ringing and the calling party hears Ringback Tone Inthe FCCS network PS must be called with Station Number An incoming call from the Tie Line trunk rings the same as a station call See STACK DIALING STATION for the PS feature PS cannot be used for the Night station PS can activate this feature only for the Attendant Console Remote Access to System Terminating side is PS When the PS is Out of Zone Out of Area or in POWER OFF state the calling party encounters Busy Tone but call termination is not retried If the AUTOMATIC ANNOUNCEMENT CALLED PS OUT OF ZONE A 129 is set to the PS th
17. n ce bao ce The following billing services are available in the Wireless system SMDR for outgoing line SMDR for incoming C O line SMDR for outgoing Tie line SMDR for incoming Tie line SMDR for incoming DID SMDR for DIT SMDR for IC ATT CON 6 5 is not connected to the data terminal equipment Will be available in the future 7 Service Conditions for CCIS features are as follows a When a call is originated from or terminated to a PS via CCIS the calling number sent to the called station varies depending on the numbering plan as shown below closed numbering network telephone number PS number e open numbering network office code telephone number PS number b When a PS user has a call placed on hold link re connection is not performed NEAX2400 IPX Wireless Features and Specifications Page 2 NDA 24313 Issue 1 Wireless Features Wireless Features Dynamic Radio Channel Control Radio Channel Changeover Speech Scrambling Service Area Assignment Out of Cell Indication Automatic Release Out of Cell Calls PS Authentication PS Location Registration Overlap Dialing Preset Dialing Individual PS Calling Handover DTMF Signal Sender Consultation Hold Flexible PS Numbering PS Service Class PS Restriction Class Radio Paging Channel Distribution PS to Station Calling Stack Dialing Station Sp
18. Caller Distinctive Ringing CCIS Distinctive Ringing PRI Do Not Disturb CCIS Do Not Disturb Do Not Disturb D CCIS Do Not Disturb D PRI Dual Hold D n Dual Hold D CCIS Dual Station Call E911 ANI Unified Number of Digits E911 ANI Unified Number of Digits CCIS EIA RS232C Interface Elapsed Time Display CCIS pem Elapsed Time Display Elapsed Time Display PRI Emergency Call Event Based CCIS ISDN Transport Event Based CCIS Q SIG Transport Exclusive Hold Dem Executive Right of Way Executive Right of Way CCIS Executive Right of Way Fm When the call is originated from PS To When the call terminates to PS X Available Not available X Available with limitations NEAX2400 IPX Wireless Features and Specifications NDA 24313 Issue 1 Page 13 General Service Features Series 7300 Series 7400 Stand Alone FCCS Stand Alone FCCS Feature Name Fm To Fm To Fm To Fm To Expanded Multiple Line Operation pem Faulty Trunk Report Faulty Trunk Report PRI FCCS Networking via IP Flash Button De Flash Entry
19. Conditions Conditions between PBX and ZT 1 Only CCITT standardized rate adaption V 110 or X 30 can be used as the User Information Layer 1 Protocol in case of data termination Allowed User Rate of the Bearer is 32 kbps only The sub line of the two line PS does not provide this feature both origination and termination are restricted Conditions by PS 1 This feature does not support the CALL FORWARDING DROPPED CALLS C 161 AUTOMATIC ANNOUNCEMENT DISCONNECTED PS OUT OF ZONE A 128 AUTOMATIC ANNOUNCEMENT CALLED PS OUT OF ZONE A 129 feature Accordingly if a PS is once out of zone any of these features are not provided Data communication originating is not available by using the TRUNK LINE APPEARANCE feature The Call Waiting service is not available for the PS which is just engaged in data communication CALL FORWARDING BUSY LINE assigned to a PS does not function if the PS is just engaged in data communication Accordingly if the communication is in progress the third incoming call including that by another data terminal is not forwarded to the target destination i e disconnected CALL FORWARDING DON T ANSWER assigned to a PS does not function if the PS is just engaged in data communication Accordingly if the communication is in progress the third incoming call including that by another data terminal is not forwarded to the target destination i e disconnected after a certain period of time
20. Data Transparency CCIS Data Transparency PRI Data Uniform Numbering Plan Data Uniform Numbering Plan PRI Day Night Class of Service Delay Announcement Attendant Delay Announcement UCD Delayed Ringing Deluxe Traveling Class Mark CCIS Dial Access to Attendant Dial Access to Attendant CCIS Dial Intercom Dial Monitor D Dialed Number Display Recall CCIS Dictation Access DID Addressing Digital Display Station Digital Display Station CCIS Digital Display Trunk Digital Display Trunk CCIS Digital Line Switching Direct Digital Interface Fm When the call is originated from PS To When the call terminates to PS X Available Not available X Available with limitations NEAX2400 IPX Wireless Features and Specifications Page 12 NDA 24313 Issue 1 General Service Features Series 7300 Series 7400 Stand Alone FCCS Stand Alone FCCS Feature Name Direct In Termination DIT Direct In Termination DIT PRI Direct In Termination CCIS Direct Inward Dialing DID Direct Outward Dialing DOD Direct Station Selection DSS Console Distinctive Ringing Distinctive Ringing
21. INCOMING INCOMPLETE LCD display of the calling station H TARO DIR SPD LNR LCD display of the called station CF M TARO DIR SPD LNR Service Conditions oe ON UA This feature is available for Series 7300 or later software User information corresponding to the Physical Station Number that can be displayed on the LCD is a maximum of 16 digits User information is displayed on the LCD indented to the left The information may consist of upper case letters numeric characters and most keyboard symbols When user information is 12 digits or more the first or last part of information can be displayed by key operation Refer to the User Guide of PS This service and NAME DISPLAY by Open Application Interface cannot be activated concurrently This service and NAME DISPLAY service for 5 can be activated concurrently Eight digit display or 16 digit display is selectable by System Data but cannot be used concurrently If the PS station has no name programmed for NAME DISPLAY INTRA NODE CALL CCIS service Office Code Physical Station Number is displayed in the name field NAME DISPLAY INTRA NODE CALL CCIS is available for Tie Line Connection Call Forwarding All Calls Busy Line Don t Answer PS Incoming Incomplete Call Waiting and Call Transfer NEAX2400 IPX Wireless Features and Specifications NDA 24313 Issue 1 Page 49 N 45 Number Sharing N 45 Number Sharing General Description This feature al
22. N 45 Number rcg obici oh COE e dete eed dc dede o p p V 24 Voice Mail Indication VMI W 8 Wireless Analog Adjunct Connection 1 41 ISDN Roaming C 161 Call Forwarding Dropped Calls 1 40 ISDN Data Communications 32 kbps A 137 Authorization Code PSII dde G 23 Group Call Automatic Conference 20 Party S 134 Short Text Messaging Service STM Service Movement of PS in NEAX2400 IPX NEAX2400 IPX Wireless Features and Specifications NDA 24313 Issue 1 NDA 24313 ISSUE 1 OCTOBER 2000 Pagei This page is for your notes NEAX2400 IPX Wireless Features and Specifications Page ii NDA 24313 Issue 1 Wireless Specification in NEAX2400 IPX Wireless Specification in NEAX2400 IPX Acronym Wireless Community Number 1 1024 FCCS network Conditions Can be assigned over the node Remarks Calling Area Number 1 32 PCN defined by the Wireless System standard Cannot be assigned over the node Maximum 32 nodes can be covered in the identical PCN even if one ERN is assigned in a node Group Number 1 8 ERN defined by the Wireless System standard ZT Number 1 32 GRN defined by the Wireless System standard Maximum
23. Wireless Features and Specifications Page 18 NDA 24313 Issue 1 General Service Features Series 7300 Series 7400 Stand Alone FCCS Stand Alone FCCS Feature Name Fm To Fm To Fm To Fm To Number Portability CCIS Off Hook Alarm Off Hook Line Number Display Off Hook Queuing Off Hook Queuing CCIS Off Hook Queuing PRI On Line Maintenance Outgoing Trunk Busy Announcement Outgoing Trunk Queuing Outgoing Trunk Queuing Attendant Outgoing Trunk Queuing Attendant PRI Outgoing Trunk Queuing CCIS Outgoing Trunk Queuing Deluxe PRI Outgoing Trunk Queuing Outgoing Trunk Queuing PRI Overflow UCD Overflow UCD PRI Pad Lock Paging Access Paging Access CCIS Paging Transfer Paging Transfer PRI Passing Dial Tone Peg Count Peg Count PRI Periodic Time Indication Tone Personal Ringer Port Contention Power Failure Transfer PRI Fail Safe Routing PRI Terminal Support AT amp T Fm When the call is originated from PS When the call terminates to PS X Available Not available X Available with limitations NEAX2400 IPX Wireless
24. __ M PCS a N j 0 e lt ree pou d gt ES ES di be uu Node W Node Y 2 PONID PCN d MOVE TO MOVE FROM A HOME NODE HOME PCN A B HOME NODE HOME PCN Stand by condition Movement H O Stand by condition Movement H O E F HOME NODE OTHER PCN Intra FCCS Roaming Intra FCCS Roaming OTHER FCCS FIRST VISIT NODE FIRST PCS FIRST PCN Roaming Roaming M YET OTHER FCCS Roaming C OTHER NODE HOME PCN Stand by condition Movement H O Stand by condition Movement H O Intra FCCS Roaming Intra FCCS Roaming Roaming Roaming Roaming E HOME NODE OTHER PCN Intra FCCS Roaming Intra FCCS Roaming Stand by condition Movement H O Stand by condition Movement H O Roaming Roaming Roaming G OTHER NODE OTHER PCN Page 72 Intra FCCS Roaming Intra FCCS Roaming Stand by condition Movement H O Stand by condition Movement H O Roaming Roaming Roaming Roaming Roaming NEAX2400 IPX Wireless Features and Specifications NDA 24313 Issue 1 Movement of PS in NEAX2400 IPX MOVE TO K A B HOME E F HOME OTHER OTHER M NODE NODE recs ECGS YET OTHER HOME PCN OTHER FIRST VISIT OTHER FCCS PCN NODE NODE FIRST PCS FIRST PCN MOVE FROM l Stand by Stand by OTHER F
25. a PS is in the Intra FCCS Roaming or Roaming status movement of the PS within the current PCN is also stand by condition movement In the NEAX2400 IPX system the home PCN can be assigned over the node however the Calling Area cannot Because of this the event of PS Location Registration occurs whenever an idle PS moves over the node Hand Over Movement of a PS engaged in communication within the home PCN area in the home FCCS network The event of Hand Over occurs regardless of the Calling Area Even if a PS is in the Intra FCCS Roaming or Roaming status movement of the PS engaged in communication within the current PCN is also Hand Over In the NEAX2400 IPX system the call engaged in communication is supported even in the case of Hand Over over the node Intra FCCS Roaming Effective only in the home FCCS network Roaming Request is made to the home node whenever Roaming occurs out of the home FCCS network This pattern simplifies the internal operation The call engaged in communication is not supported Roaming PS Location Registration to the ZT in another PCN than the home PCN is called Roaming The call engaged in communication is not supported NEAX2400 IPX Wireless Features and Specifications NDA 24313 Issue 1 Page 71 Movement of PS in NEAX2400 IPX FCCS I FCCS I Home PCN a PCN c Se ae First Visit Node
26. indented to the left The information may consist of English alphabets numeric characters and most keyboard symbols When user information is 12 digits or more the first or last part of information can be displayed by key operation Refer to the User Guide for the PS This service and NAME DISPLAY by Open Application Interface cannot be activated concurrently This service and NAME DISPLAY service for can be activated concurrently Eight digit display or 16 digit display is selectable by System Data but cannot be used concurrently If the PS station has no name programmed for NAME DISPLAY INTRA NODE CALL service the Physical Station Number is displayed in the name field NAME DISPLAY INTRA NODE CALL is available for Station to Station Connection Call Forwarding All Calls Busy Line Don t Answer PS Incoming Incomplete Call Waiting and Call Transfer NEAX2400 IPX Wireless Features and Specifications NDA 24313 Issue 1 Name Display Intra Node Call CCIS N 44 N 44 Name Display Intra Node Call CCIS General Description Between CCIS nodes this feature allows the calling or called party information to be displayed on the LCD of a PS Operating Procedure When originating a call LCD display of the calling station H TARO DIR SPD LNR LCD display of the called station H TARO e m SPD LNR When a call has been transferred to another station by CALL FORWARDING ALL CALLS BUS Y LINE DON T ANSWER PS
27. lamp goes off on the 0 Main Station 2 This feature is cancelled To set from the PS 1 While in idle state dial the access code for this feature and receive Service Set Tone The PS Transfer lamp lights on the D Main Station 2 the calls to the are forwarded to the PS Sub Station To cancel from the PS 1 While this feature is set dial the cancel code for this feature and receive Service Set Tone The PS Transfer lamp goes off the D Main Station 2 This feature is cancelled Service Conditions This feature is available for Series 7300 or later software A telephone number must be assigned to both Main and Sub Stations The PS cannot be assigned as Main Station Any combination of Main Station and Sub Station is available in a FCCS network The access code for an outgoing call cannot be assigned as a telephone number of the Sub Station ON UI pec sc Xo ies Dialing the access code for this feature is available only for Main Station and Sub Station Any other station or trunk cannot set this feature 7 The D user can set this feature using any line on the D Even if the user sets this feature using a sub line this feature is set to My Line 8 PS Transfer key is available only when the D is in idle state NEAX2400 IPX Wireless Features and Specifications Page 50 NDA 24313 Issue 1 Number Sharing N 45 Service Conditions cont d 9 10 11 12
28. number of PSs 4000 PSs node In FCCS network there is no limitation within the limit of maximum FCCS ports and the capability of NDM The value is the total number of the actual PSs and the temporary numbers for Visitors and it is possible to use both as actual or temporary PSII Two Line Operation service uses 2 PS resources Maximum number of ZTs 4 ZTs CS INT 12 CS INTs PIM Maximum 768 ZTs 4 IMG system The number of CS INTs in a PIM is 12 with power supply Number of B channels 3 voice channels of 32 Kbps ZT e ZT ID SYS ID and Additional ID 42 bits gt 29 bits 13 bits 5 3 B gt SYS ID PCN 1 1 ERN GRN CSN 2400 IPX Wireless Features and Specifications NDA 24313 Issue 1 Page 1 Wireless Specification in NEAX2400 IPX The following figure shows zone setting PCN 1 Assign calling area over the node is not allowed When the FCCS network is established inter node Hand Over is available within an identical PCN Service Conditions Below are some of the conditions for the use of the Built in Wireless system IPX Wireless system is not available in the Hotel system Will be available in the future ACD OAI services are not available with the Wireless system Series 7200 or later software is necessary for Wireless system operation SMDR equipment can be used for billing
29. the Attendant Console To set CALL WAITING it is necessary that the Service Restriction Class data be assigned in the office data assignment Call Waiting service is provided according to each service feature restriction class There are no limitations to the number of CALL WAITING services such as the number of simultaneous settings the number of occurrence of answers NEAX2400 IPX Wireless Features and Specifications NDA 24313 Issue 1 Note 5 Note 6 Note 7 Note 8 Note 9 Note 10 Note 11 Note 12 General Service Features This service cannot be used with the Central Office line DIRECT IN TERMINATION or a call via the Attendant Console While the Attendant Console is calling a PS the services associated with Out of Zone such as CALL FORWARDING PS INCOMING CALL INCOMPLETE C 155 AUTOMATIC ANNOUNCEMENT CALLED PS OUT OF ZONE A 129 and AUTOMATIC ANNOUNCEMENT DISCONNECTED PS OUT OF ZONE A 126 are not available When an Attendant calls a PS the individual Attendant number can be displayed on the LCD of the PS However OPR cannot be displayed on the LCD of the PS When the PS is assigned as the target station of DIRECT IN TERMINATION DIT D 7 When the PS is Out of Zone Out of Zone or in POWER OFF state the calling party hears Ringback Tone Besides if AUTOMATIC ANNOUNCEMENT CALLED PS OUT OF ZONE A 129 is assigned to the PS the calling party does not hear the Out of Zone Announcement
30. to the PS out of zone the AUTOMATIC ANNOUNCEMENT CALLED PS OUT OF ZONE A 129 service cannot be activated The calling party continues to hear Ringback Tone 9 When the PS engaged in a connection via the existing PBX moves Out of Zone the AUTOMATIC ANNOUNCEMNET DISCONNECTED PS OUT OF ZONE A 128 service is not provided The calling party hears Reorder Tone 10 This feature is not available in the FCCS network NEAX2400 IPX Wireless Features and Specifications NDA 24313 Issue 1 Page 53 W 8 Wireless Analog Adjunct Connection Service Conditions cont d 11 Whena call terminates to the PS using this feature the calling number is not displayed on the PS 12 The following PBX services are available for PS s using this feature e call origination e call termination e ntra office services Common the other services SDN service e Network service e Call charging management service e Maintenance administration service NEAX2400 IPX Wireless Features and Specifications Page 54 NDA 24313 Issue 1 41 ISDN Roaming 1 41 ISDN Roaming General Description This feature allows PS to move to another PBX which has a different SYS ID via Q 931a connection The PBX which PS can roam from to is assigned Network Number NWN Network Number must be assigned as a unique number for each network Operating Procedure l 2 3 4 PS moves to another PBX which has a different SYS ID PS register
31. 400 Stand Alone FCCS Stand Alone FCCS Feature Name Fm To Fm Multiple Call Forwarding All Calls PRI Multiple Call Forwarding Busy Line Multiple Call Forwarding Busy Line CCIS Multiple Call Forwarding Don t Answer Multiple Call Forwarding Don t Answer CCIS Multiple Console Operation Multiple Console Operation CCIS Multiple Line Operation Music On Hold Music On Hold PRI Nailed Down Connection Nailed Down Connection PRI Name Display OAI CCIS Name Display System National ISDN 2 PRI NI 1 BRI Terminal Support Night Connection Fixed Night Connection Fixed CCIS Night Connection Fixed PRI Night Connection Flexible Night Connection Flexible CCIS Night Connection Flexible PRI Night Connection Outside System Night Connection Outside System PRI Non Delay Operation Non Delay Operation PRI Non Exclusive Hold Non Square Line Assignment Non Facility Associated Signaling PRI Fm When the call is originated from PS To When the call terminates to PS X Available Notavailable X Available with limitations NEAX2400 IPX
32. AX2400 IPX to supervise the location of each D PS series upon receiving the location registration request to allow call termination Operating Procedure No manual operation is required Service Conditions 1 This service is activated every time the D PS enters a different calling area A maximum of 32 calling areas can be installed in the PCN of the NEAX2400 IPX A maximum of 192 zone transceivers can be installed in a single stack 3 PS AUTHENTICATION is activated every time the D PS requests location registration In a FCCS network the calling area cannot be assigned over multiple nodes NEAX2400 IPX Wireless Features and Specifications Page 32 NDA 24313 Issue 1 Overlap Dialing O 39 O 39 Overlap Dialing General Description This service allows the D PS series user to receive a Dial Tone and to dial the desired number to originate call Operating Procedure To originate a call 1 Press the SEND or L1 L2 key receive Dial Tone 2 the desired number The dialed numbers are displayed on the LCD Service Conditions 1 maximum 24 digits numbers 0 to 9 and can be dialed A maximum of 12 digits can be displayed on the LCD The PS user can dial the number before hearing Dial Tone 3 The prepause timer after receiving Dial Tone is ten seconds and if no number is dialed within this period the user receives Reorder Tone 4 Ifthe interdigit timer expires while the user is dialing
33. Automatic Overflow to DDD PRI LCR Clocked Manual Override PRI LCR Special Line Warning Tone PRI LCR Time of Day Routing LCR Time of Day Routing PRI LDN Night Connection LDN Night Connection CCIS LDN Night Connection Outside LDN Night Connection Outside PRI LDN Night Connection PRI Least Cost Routing LCR 3 6 Digit Least Cost Routing LCR 3 6 Digit PRI Line Load Control Attendant Line Load Control Automatic Line Load Control MAT Line Lockout Line Preselection Line Reconnect Other Line Line Reconnect Same Line Listed Directory Number Display Attendant Look Ahead Routing CCIS Maintenance Administration Terminal MAT Maintenance Printout When the call is originated from PS To When the call terminates to PS Available Not available Available with limitations NEAX2400 IPX Wireless Features and Specifications Page 16 NDA 24313 Issue 1 General Service Features Series 7300 Series 7400 Stand Alone FCCS Stand Alone FCCS Feature Name Fm To Fm To Fm To Fm To Manual Disconnection of Data Call
34. CCS condition condition Roaming Roaming None Eee Roaming Roaming Roaming Roaming Movement Note Note PCN H O H O Roaming K Stand by Stand by OTHER FCCS Roaming Roaming Roaming Roaming condition condition Roaming Roaming OTHER NODE Movement Movement Note Note FIRST PCN H O H O Roaming J Stand by Stand by OTHER FCCS FIRST VISIT Roaming Roaming Roaming Roaming NOS NODE OTHER ote ote ovement ovement PCN H O H O Roaming L Stand by Stand by OTHER FCCS Roaming Roaming Roaming Roaming Roaming Roaming condition condition OTHER NODE Note Note Movement Movement OTHER PCN H O H O Roaming Roaming or Stand by M D condition YET OTHER i i i i i i E bees Roaming Roaming Roaming Roaming Roaming Roaming depending on the case Note This pattern is treated as Roaming by re Roaming to the home node in FCCS I NEAX2400 IPX Wireless Features and Specifications NDA 24313 Issue 1 Page 73 This page is for your notes NEAX2400 IPX Wireless Features and Specifications Page 74 NDA 24313 Issue 1
35. D PS user attempts to originate a call via the TRUNK LINE APPEARANCE service the user receives Reorder Tone 3 Each PS is assigned a service restriction class linking to that of the PBX to restrict the user from placing CO outgoing calls etc There are 15 classes and these classes are assigned in the system parameters traveling class mark Refer to DIRECT OUTWARD DIALING RESTRICTION 3 9 for more details ZZ Ae NEAX2400 IPX Wireless Features and Specifications Page 40 NDA 24313 Issue 1 PS to Station Calling P 66 P 66 PS to Station Calling General Description This service allows the D PS series user to place a call to a PBX station and vice versa Operating Procedure To place a call using OVERLAP DIALING 1 Press the SEND or L1 key receive Dial Tone 2 Dial the desired number receive Ringback Tone To place a call using PRESET DIALING 1 Dial the desired number then press the SEND LI key receive Ringback Tone Service Conditions 1 dialed digits are sent out in the following timing a when the NEAX2400 IPX recognizes the last digit according to the numbering plan b if the NEAX2400 IPX cannot recognize the last digit ten seconds after the last digit is dialed inter digit timer time out NEAX2400 IPX Wireless Features and Specifications NDA 24313 Issue 1 Page 41 S 131 Stack Dialing Station S 131 Stack Dialing Station General Desc
36. Features and Specifications NDA 24313 Issue 1 Page 19 General Service Features Series 7300 Series 7400 Stand Alone FCCS Stand Alone FCCS Feature Name Fm To Fm To Fm To Fm To PRI Trunk to Tie Line Connection with Pad Control Primary Call Restriction PRI Prime Line Pickup Priority Call Priority Paging pem Privacy ptem Privacy on All Lines Privacy Release Pushbutton Calling Pushbutton Calling Attendant Only Pushbutton to Rotary Conversion Q SIG Circuit Switched Basic Call ETSI Version Radio Paging X X gt gt Remote Access to System By Note 11 Note 11 Note 11 Note 11 Remote Maintenance Reserve Power Restriction from Outgoing Calls Restriction from Outgoing Calls CCIS Restriction from Outgoing Calls PRI Ringer Mute Rotary Dial Calling Route Advance Route Restriction Announcement RS 464A PAD Same Routing of Voice and Data Save and Repeat D SDN Access Separate Routing of Voice and Data Serial Call Fm When the call is originated from PS To When the call terminates to PS X Available Not available X Available with limitations
37. NEC NDA 24313 ISSUE 1 STOCK 200817 NEAX 2400 IPX Wireless Features and Specifications OCTOBER 2000 NEC America Inc LIABILITY DISCLAIMER NEC America Inc reserves the right to change the specifications functions or features at any time without notice NEC America Inc has prepared this document for use by its employees and customers The information contained herein is the property of NEC America Inc and shall not be reproduced without prior written approval from NEC America Inc NEAX and D are registered trademarks of NEC Corporation 2000 NEC America Inc Printed in the U S A PAGE No ISSUE No 4 5 PAGE No ISSUE No 4 5 ol NIJA AJOJN a a mu as E A E oa ED N cu e A A k A Cc ISSUE 1 ISSUE 2 ISSUE 3 ISSUE 4 OCTOBER 2000 ISSUE 5 ISSUE 6 ISSUE 7 ISSUE 8 NEAX2400 IPX Wireless Features and Specifications Revision Sheet 1 1 NDA 24313 NEAX2400 IPX Wireless Features and Specifications Feature List Wireless Specification in NEAX2400 IP
38. NOUNCEMENT CALLED PS OUT OF ZONE are not programmed the caller hears Busy Tone AUTOMATIC ANNOUNCEMENT CALLED PS OUT OF ZONE does not allow the incoming call from outside to be connected to announcement trunk The calling party hears Ringback Tone NEAX2400 IPX Wireless Features and Specifications NDA 24313 Issue 1 Page 45 C 155 Call Forwarding PS Incoming Call Incomplete Service Conditions cont d 9 10 11 12 13 14 15 Note Page 46 The incoming incomplete call to a D PS can be transferred to other D PS s stations Attendant Consoles Central Office and TIE lines when CALL FORWARDING PS INCOMING CALL INCOMPLETE is in service The timer value of incoming incomplete call is approximately eight seconds time duration until the system recognizes that the PS is Out of Zone from an incoming call attempt to the D PS CALL FORWARDING PS INCOMING CALL INCOMPLETE is not activated in the case of the incoming call from ISDN and the incoming call via the Attendant Console The caller encounters AUTOMATIC ANNOUNCEMENT CALLED PS OUT OF ZONE or Busy Tone When a forwarded station for CALL FORWARDING PS INCOMING CALL INCOMPLETE sets CALL FORWARDING ALL CALLS to the announcement CALL FORWARDING PS INCOMING CALL INCOMPLETE is not activated but the caller hears Busy Tone In a FCCS network every node must have one or more Announcement Trunk When incoming call comes from ISDN network and the ti
39. OMATIC RELEASE OUT OF CELL CALLS is activated PS AUTHENTICATION is activated every time this service is activated In a FCCS network inter node HANDOVER is available within the identical PCN NEAX2400 IPX Wireless Features and Specifications Page 36 NDA 24313 Issue 1 DTMF Signal Sender D 154 D 154 DTMF Signal Sender General Description This service allows the PS series user to send the PB signal tone to the called party terminal voice mail system etc while engaged in communication Operating Procedure To send the DTMF signal 1 Press a key while engaged in communication The PBX automatically sends the corresponding signal tone to the called party Service Conditions 1 When DTMF signal is sent there may be an interruption in communication The signal tone varies between 64 ms to 72 ms 3 When this service is activated the number pressed is displayed on the LCD clearing the called party number previously displayed The LCD display is cleared after 20 seconds but the called party number will not be displayed again NEAX2400 IPX Wireless Features and Specifications NDA 24313 Issue 1 Page 37 C 156 Consultation Hold C 156 Consultation Hold General Description This service allows the PS user to place a call on hold Only that PS user can retrieve the held call Operating Procedure To place a call on hold 1 While engaged in a call press the TRF or F2 key recei
40. Service STM Service Service Conditions cont d S 134 10 Hardware Requirements PS and ZT that are both supporting this feature should be used If other PS ZT is used the following occurs at the PBX side PBX sends an STM request to a PS PBX cannot obtain a response signal from the PS Also PBX cannot identify that the PS ZT is not compatible with the STM feature PBX judges the PS as in and returning from the out of zone area According to the judgement above PBX performs adequate processing PS is judged as Interactions 1 The STM is influenced by System Data of Multiple ACDPs including Multiple IPs returning from the zone and a retry of STM request is made Note For multiple ACDPs refer to the CallCenterWorX Enterprise ACD System Manual PBX 1 PBX 2 STM STM LIII ND gt FCCS PS 1 PS 2 STM Server A STM Available NA STM Not Available Not used SYSTEM DATA OF PBX 1 SYSTEM DATA OF PBX 2 MULTIPLE ACDPS Ineffective DISPERSION AGENT MULTIPLE ACDPS Ineffective DISPERSION AGENT Ineffective Effective Ineffective Ineffective Effective Effective Effective Ineffective Ineffective Effective Ineffective Effective Ineffective Effective Ineffective Effective Effective Effective Effective Ineffective Effective
41. X Wireless Features tud aurcs ded dud dd dud radi General Service Features 2 2 2 c 2ccacibeeecetetereckceiancior R 50 Radio Channel Changeover 5 130 Spesch Scrambling ada suci ko d eod d bocca e doro 544808 d O 38 Out Of Cell SY Me TP A 131 Automatic Release Out Of Cell Calls P 61 Po PARE SOON oc cee cece tame nde P 62 PS Location Beglelratlol sccucccesrcickareasesededwasdad 0 39 Overlap DIANO aca RC Re dal dede oo Ago AD oe Re P 63 Preset Dialing dened aan aoi rag ec ae ded I 39 Ce PS Calling OP H 23 nop ede ee a eel 02 154 DTMF Signal Sender 2 cicivicicees dene das C156 Consultation Hold ose sese sesira RR ema cdd edd umen F 34 Flexible PS Numbering P 64 oosorhpeberiR RRePRSBQ dW ad EA dd d P 65 ps PS LONE RR CER CR eee ir P 66 Calig duque rd R RETRO doen 5 131 Stack Dialing SIAN chip bh CD de d S132 Speed Calling Station wx Rr x Rx A 128 Automatic Announcement Disconnected PS Out Of Zone A 129 Automatic Announcement Called PS Out of Zone C 155 Call Forwarding PS Incoming Call Incomplete 0 155 PSII Two Line Operation seen N 43 Name Display Intra Node Call N 44 Name Display Intra Node Call CCIS
42. X Call Forwarding Busy Line PRI Fm When the call is originated from PS To When the call terminates to PS X Available Not available X Available with limitations NEAX2400 IPX Wireless Features and Specifications NDA 24313 Issue 1 Page 7 General Service Features Series 7300 Series 7400 Stand Alone FCCS Stand Alone FCCS Feature Name Fm Fm X gt Note 14 Note 14 Call Forwarding Don t Answer Call Forwarding Don t Answer CCIS Call Forwarding Don t Answer ptem X gt Call Forwarding Don t Answer Outside Call Forwarding Don t Answer PRI Call Forwarding Don t Answer to UCD Queue Call Forwarding Intercept CCIS Call Forwarding Intercept PRI Call Forwarding I m Here Call Forwarding Intercept Announcement Call Forwarding Intercept Announcement Attendant Call Forwarding Intercept Announcement PRI Call Forwarding Override Call Forwarding Override CCIS Call Forwarding Supplementary Service SS CF with Rerouting Call Hold Call Hold Conference Call Hold Call Hold Pick Up Call Metering Call Park Call Park PRI Call Pickup Direct X Call Pickup Direct PRI X X gt Note 15 Note 15 Note 15 Note 15
43. able Available with limitations NEAX2400 IPX Wireless Features and Specifications Page 6 NDA 24313 Issue 1 General Service Features Series 7300 Series 7400 Stand Alone FCCS Stand Alone FCCS Feature Name To Fm To Fm To Fm To Brokerage Hot Line CCIS Brokerage Hot Line Outside Brokerage Hot Line Outside PRI Busy Lamp Field Flexible Busy Verification Busy Verification CCIS Call Back Call Back CCIS Call Back Delayed Call Back Call Block Call by Call Pool Management Call by Call Service Selection Call Completion on No Reply CCNR Call Completion to Busy Subscriber Note 14 Call Forwarding All Calls Call Forwarding All Calls Announcement Call Forwarding All Calls Announcement PRI Call Forwarding All Calls CCIS Call Forwarding All Calls Call Forwarding All Calls D PRI Call Forwarding All Calls Outside Call Forwarding All Calls PRI Call Forwarding Assignment Attendant CCIS gt Call Forwarding Busy Line vs X Miser Call Forwarding Busy Line CCIS X X X Call Forwarding Busy Line Call Forwarding Busy Line Outside
44. ation is required Service Conditions 1 The route service class is assigned to determine the accessibility to the following service features ANNOUNCEMENT DON T ANSWER ANNOUNCEMENT PS OUT OF CELL CALL FORWARDING DON T ANSWER CALL FORWARDING PS OUT OF CELL CENTREX COMPATIBILITY 2 PS is assigned a service feature class to determine which of the following service features the PS will be permitted to activate CALL TRANSFER CALL WAITING TERMINATING CENTREX COMPATIBILITY NNOUNCEMENT SERVICE NOUNCEMENT DON T ANSWER CALL FORWARDING DON T ANSWER NOUNCEMENT PS OUT OF CELL CALL FORWARDING PS OUT OF CELL UNK LINE APPEARANCE NNOUNCEMENT SERVICE ANNOUNCEMENT DON T ANS WER CALL RWARDING DON T ANSWER ANNOUNCEMENT PS OUT OF CELL NNOUNCEMENT DON T ANSWER When the restricted PS user dials the service access code the user receives Reorder Tone If the CALL FORWARDING INTERCEPT ANNOUNCEMENT service is set the announcement notifying the user that an invalid number was reached will be sent b CALL TRANSFER When a restricted D PS attempts Call Transfer pressing of the TRF FLASH key the operation will be ignored CALL WAITING TERMINATING When Call Waiting is attempted to the restricted PS which is busy the calling party receives Reorder Tone d CENTREX COMPATIBILITY The switch hook flash operation will be invalid e TRUNK LINE APPEARANCE When the restricted
45. cription This service supervises and controls changeover the channel automatically to avoid interference and to maintain speech quality Operating Procedure No manual operation is required Service Conditions 1 There is no interruption in speech when this service is activated The new channel is assigned to the party which has moved into the service area 3 When no idle channel is available the call is continued on the same channel until the communication becomes unavailable then AUTOMATIC RELEASE OUT OF CELL CALLS is activated NEAX2400 IPX Wireless Features and Specifications NDA 24313 Issue 1 Page 27 S 130 Speech Scrambling S 130 Speech Scrambling General Description This service protects calls from being tapped Operating Procedure No manual operation is required Service Conditions 1 This service is activated for every originating call from the PS and for every terminating call to the PS For every call the encryption assignment message is sent from the D PS to the zone transceiver 2 ENCRYPTION is automatically activated throughout a call Cancelling encryption during a call is not possible NEAX2400 IPX Wireless Features and Specifications Page 28 NDA 24313 Issue 1 Out Of Cell Indication O 38 O 38 Out Of Cell Indication General Description When the D PS series user moves out of the service area the electric field strength becomes weak or the Error rate exceeds th
46. e below PBX CCIS Digital Tall Data Terminal PIAFS V 110 e E Case 3 ef Huc TAP e Case PIAFS V 110 Router Te i peut cr l lt 4 7 Data Terminal TA P PIAFS V 110 Case 1 Data Communication between PSs Multimedia PBX ps PS Data Terminal TA P ZT 4 ZT Data Terminal Case 2 Data Communication via Digital network Multimedia PBX PS Data Terminal TA P ZT PRT CCIS Digital TA P Data Terminal Case 3 Data Communication via LAN Multimedia PBX ps Data Terminal TA P ZT ILC LITA P LAN Data Terminal NEAX2400 IPX Wireless Features and Specifications Page 60 NDA 24313 Issue 1 ISDN Data Communications 32 kbps 1 40 General Description Bearer Capability Between the PBX and ZT the following message conversion is performed 1 When originating via Wireless Low Layer Compatibility element Without User Information Layer 1 Protocol Bearer ELEMENT Informatio
47. e calling party does not hear Out of Zone Announcement The calling party hears Busy Tone but is not allowed to try a call termination again If a PS user moves Out of Zone while talking with a subscriber of the Central Office line AUTOMATIC ANNOUNCEMENT DISCONNECTED PS OUT OF ZONE A 128 cannot be heard by the subscriber outside Busy Tone is heard When acall activated REMOTE ACCESS TO SYSTEM is transferred to a certain PS or a station to which CALL FORWARDING PS INCOMING CALL IMCOMPLETE C 155 is set and when the transferred party is Out of Zone or in the lock out state the calling party hears Busy Tone PS is not allowed to be handed over while ringing When the called PS is ringing with REMOTE ACCESS TO SYSTEM in service and at the same time its transceiver zone is switched over the PS stops ringing and the calling party hears Busy Tone See PRESET DIALING for the PS feature NEAX2400 IPX Wireless Features and Specifications NDA 24313 Issue 1 Page 25 Note 13 Tie Line Step Call is not available from PS Step call from a PS to the Attendant Console is not available Note 14 In a FCCS network CALL FORWARDING destination station from a PS must have a telephone number Note 15 PS in the Home PBX cannot pick up the PS ringing the Visit PBX over FCCS network NEAX2400 IPX Wireless Features and Specifications Page 26 NDA 24313 Issue 1 Radio Channel Changeover R 50 R 50 Radio Channel Changeover General Des
48. e number for visitor PS Physical Station Number must be assigned Visitor PS Physical Station Number must be the number which is not used in the Visitor PBX for the other Physical Station Number The maximum number of PS s includes the number of visitor PS Physical Station Numbers Roaming PS cannot use Two Line feature Roaming PS cannot use Voice Mail Indication VMI feature Roaming PS cannot use OAI features NEAX2400 IPX Wireless Features and Specifications NDA 24313 Issue 1 Page 55 41 Service Conditions ISDN Roaming 13 A PS can move to any node of the FCCS network that has a different SYS ID on the condition that a Q 931a Tie Line is established between the different SYS ID FCCS networks Available for Series 7400 software FCCS Network A FCCS Network B SYS ID XXXXXXXXX SYS ID ZZZZZZZZZ d MS E S Roaming gt O in FCCS Roaming X Fi i pese PS 4 i Q931aTie i FCCS Line i FCCS i Node A Node B NodeC Node D O FCCS Roaming i n E dae ul oaming gt no Roaming d be 55 XO Page 56 NEAX2400 IPX Wireless Features and Specifications NDA 24313 Issue 1 Call Forwarding Dropped Calls C 161 C 161 Call Forwarding Dropped Calls General Description This feature provides a call forwardin
49. e threshold this service notifies the user with a warning tone and the LCD display Operating Procedure No manual operation is required Service Conditions 1l If the D PS user turns the power on when he she is out of the service area or when the user moves out of the service area while idle antenna pict display goes off and the LCD displays SVC or No Service in the upper section 2 When the D PS user moves out of the service area while engaged in a call antenna pict display goes off and the LCD displays NO SVC or No Service in the upper section after the user receives a warning tone 3 When the electric field strength becomes so weak that communication cannot be continued or when the Error rate exceeds the threshold AUTOMATIC RELEASE OUT OF CELL CALLS is activated NEAX2400 IPX Wireless Features and Specifications NDA 24313 Issue 1 Page 29 A 131 Automatic Release Out Of Cell Calls A 131 Automatic Release Out Of Cell Calls General Description When the PS series user engaged in a call moves out of the service area or enters radio zone where all the channels of ZTs are busy and the communication becomes unavailable the call will be disconnected automatically and Reorder Tone or Out of Area Announcement will be sent to the opposite end Operating Procedure No manual operation is required When the number of the party engaged in the call is displayed it will be cleared
50. eased to get out of the conference When the conference leader hangs up the conference connection is released Service Conditions 1 2 3 Firmware SP 1141 Conference leader and conferee must be a PS Station PA CFTB can be available for Group Calling Conference The following table shows conditions of CFTB circuit card to use this feature MAXIMUM NUMBER OF KEY SETTING KEY SETTING FIRMWARE NAME CONFERENCE MEMBERS SW2 2 SW2 3 Firmware SP 388 This firmware cannot be used for cascade connection 4 Note Page 66 The maximum number of CFTB circuit cards per one conference group is three The number of CFTB circuit cards required to call a conference depends on the maximum number of conference members per conference group 2 8 members including conference leader one circuit card 9 14 members including conference leader two circuit cards 15 20 members including conference leader three circuit cards Maximum A maximum of 16 digits of Group Calling Conference Number telephone number Phantom Telephone Number corresponding to a conference leader port of CFTB should be assigned A user must assign the telephone number for the conferee By making a group of Station Hunting Group Circular between conference leader ports or conference leader ports for cascade connection of multiple sets of CFTB circuit cards the conference can be held looking for idle CFTB circuit cards when the dialed port
51. ed Calling Station Note 12 Note 12 Note 12 Note 12 Note 12 Note 12 Note 12 Note 12 Speed Calling Station PRI Fm When the call is originated from PS When the call terminates to PS X Available Not available X Available with limitations NEAX2400 IPX Wireless Features and Specifications NDA 24313 Issue 1 Page 21 General Service Features Series 7300 Series 7400 Stand Alone FCCS Stand Alone FCCS Feature Name Fm To Fm To Fm To Fm To Speed Calling System Speed Calling System Der Speed Calling System D PRI Speed Calling System PRI Split Call Forwarding Splitting Splitting Station 5dB Pad Station Controlled Conference Station Controlled Conference CCIS Station Individual Trunk Access PRI Station Hunting Circular Station Hunting Secretarial Station Hunting Terminal Station Message Detail Recording System Station Message Detail Recording System PRI Station to Station Calling Station to Station Calling CCIS Station to Station Calling Operator Assistance Station to Station Calling Operator Assistance CCIS Status Display Status Indication X gt gt Note 13 Note 13 Note 13 Step Call CCIS X gt
52. eed Calling Station Volume Control Battery Display Receive RF Power Display Any Key Answer Not available for D PSII Automatic Answer Key Lock NEAX2400 IPX Wireless Features and Specifications NDA 24313 Issue 1 Page 3 Wireless Features FEATURE NAME REMARKS Peg Counts per four transceivers Number of call originations attempted Number of call originations completed Number of call terminations attempted Number of call terminations completed Traffic ch Fault Report Number of Out of Cell Release Calls Radio Channel Changeover Handover Count Automatic Announcement Disconnected PS Out of Zone Automatic Announcement Called PS Out of Zone Call Forwarding PS Incoming Call The Incoming calls are subject to charging PSII Two Line Operation Name Display Intra node Call Name Display Intra node Call CCIS Number Sharing Voice Mail Indication VMI Wireless Analog Adjunct Connection ISDN Roaming Call Forwarding Dropped Calls ISDN Data Communications 32 kbps Authorization Code PSII Call Park D PSII Group Call Automatic Conference 20 Party Short Text Messaging Service STM Service NEAX2400 IPX Wireless Features and Specifications Page 4 NDA 24313 Issue 1 General Service Features General Service Features Series 7300 Series 7400 Stand Alone FCCS Stand A
53. eed Calling System Consultation Hold All Calls Consultation Hold All Calls CCIS Consultation Hold All Calls Consultation Hold All Calls D PRI Consultation Hold All Calls PRI D Channel Backup PRI Data Call Dial Monitor Data Call Hunting Circular Data Call Hunting Secretarial Data Call Hunting Terminal Data Call Least Cost Routing 3 6 Digit Fm When the call is originated from PS To When the call terminates to PS X Available Not available X Available with limitations NEAX2400 IPX Wireless Features and Specifications Page 10 NDA 24313 Issue 1 General Service Features Series 7300 Series 7400 Stand Alone FCCS Stand Alone FCCS Feature Name Fm To Fm To Fm To Fm To Data Call Number Display Data Call Origination Data Call Peg Count Data Call Progress Responses Data Call Restriction from Outgoing Calls Data Call Route Advance Data Call Toll Restriction 3 6 Digit Data Class of Service Individual Data Communication CCIS Data Communications PRI Data Communications Link Data Connection CCSA Data Connection FX Data Connection WATS Access Data Connection Direct In Termination
54. feature noise or announcement of another office may be heard If a PS is in one of the following conditions Call Forwarding Dropped Call is not executed e When the PS encounters a squelch disconnection while it is in conference e When a connected terminal is in conference If a conferee has been assigned in a UCD group the conferee is not called NEAX2400 IPX Wireless Features and Specifications NDA 24313 Issue 1 Page 67 S 134 Short Text Messaging Service STM Service S 134 Short Text Messaging Service STM Service General Description This feature enables a short text message STM once arrived at a mail box of the Short Text Message Server external equipment to be automatically distributed to the addressee PS via Open Application Interface OAI This feature also provides a Zip Tone and WAITING notification on the display LCD of the address PS that is busy and if the PS is out of zone the feature makes retransmission of the STM after the PS returns to the zone Note This describes STM Facilities available for external STM OAI application Actual functionality depends on the application Operating Procedure 1 By using PS function key users can set a password four digits or less to the PS to enter STM short text message system mode The STM transmitted to the PS while PS s buffer maximum ten messages is busy is temporarily kept in STM server When requesting the STM delete old STM data in
55. g ISDN CCIS When forwarding destination of this feature can be e aPS e an analog an Attendant e atrunk COT Tie Line When a call terminates just in the middle of service set access code dialing Pre set Dialing before going off hook the key operation until this moment goes all null and void This feature is not available for a two way connection between a PS and an ATTCON DESKCON When a PS attempts an OG call and it ends up in a Squelch Disconnection before connected to the self node other node trunk this feature is not activated D station If a Squelch Disconnection occurs just during the following state this feature is not activated e APS is placed on hold during a two way connection with a station including PS station including PS is placed on hold during a two way connection with a PS When a PS encounters a Squelch Disconnection during a two way connection with a UCD station this feature is not available When this feature is activated and the forwarded party does not answer the following occurs When CALL FORWARDING DON T ANSWER is assigned at the forwarded party After a certain period of no answer the call is shifted to the destination of CALL FORWARDING DON T ANSWER When CALL FORWARDING DON T ANSWER is not assigned at the forwarded party Recall to the Squelch PS is not made and the forwarded party continues to ring When a call is forwarded by this feature and also is s
56. g function when a PS encounters a Squelch Disconnection such as PS moving out of zone failing to hand over a call or a sudden power down of the PS during a two way connection with a station trunk If this feature is set the PS can forward the unexpectedly disconnected call to a pre assigned forwarding destination such as a PS a user of voice mail system or an analog D n station etc Note This feature is available when CALL FORWARDING PS INCOMING CALL INCOMPLETE is already assigned to the PS Operating Procedure To set up this feature Pre set Dialing a Dial the access code to set this feature b Go off hook and hear the Service Set Tone c Go on hook 2 Overlap Dialing a Go off hook and hear the Dial Tone b Dial the access code to set this feature c Hear the Service Set Tone d Go on hook To cancel this feature Note 1 1 Pre set Dialing a Dial the access code to cancel this feature b Go off hook and hear the Service Set Tone Note 2 c Go on hook 2 Overlap Dialing a Go off hook and hear the Dial Tone b Dial the access code to cancel this feature c Hear the Service Set Tone d Go on hook Note 1 This feature also can be cancelled by cancelling CALL FORWARDING PS INCOMING CALL INCOMPLETE Refer to Item 3 under Service Conditions Note 2 When dialing the cancel access code which this feature has not be assigned Reorder Tone is returned Service Conditions 1 This feature ca
57. has already been used by others NEAX2400 IPX Wireless Features and Specifications NDA 24313 Issue 1 Group Call Automatic Conference 20 Party G 23 Service Conditions cont d 8 10 11 12 13 14 15 16 17 18 By assigning the Phantom Telephone Number to the telephone number the maximum number of conference group per set of CFTB circuit cards is 17 Phantom Telephone Number 16 telephone number 1 This service must not be assigned to the ports of LC used for LC COT connection If a conference leader hangs up or is out of zone the conference will be released When a conferee is busy or out of zone during a conference call the conferee is not called When all conferees are busy out of zone or they do not answer the conference call the conference leader hears Ringback Tone When a conferee who answered a conference call goes on hook before a conferee who is to be called last in the group is called and other conferees are busy out of zone or do not answer the call a conference leader receives no tone ISDN terminal and Attendant Console are not available in this feature Conference leader cannot call a conference using Blind Transfer When using this feature the user must assign Service Feature Restriction Class and Route Restriction Class which are different from those of other stations to ports of CFTB circuit card and also restrict all outgoing routes by system data If outgoing trunk is used for this
58. hifted to another destination the forwarding kind to be notified to the destination is CALL FORWARDING PS INCOMING CALL INCOMPLETE When this feature is activated the LCD indication on the D forwarded party is identical to that of CALL FORWARDING PS INCOMING CALL INCOMPLETE When a Squelch Disconnection occurs simultaneously at both PSs in a two way connection this feature is activated by neither PS The forwarding kind to be reported to MCI is CALL FORWARDING DON T ANSWER The assigned data for this feature can be backed up on the HDD FDD of the PBX The forwarding destination of this feature is not designated by the system data This service does not support the unrestricted digital data Service conditions for two line D PS are shown below a This service can be assigned to both lines of this type PS b When a Squelch Disconnection occurs while a line is in a two way connection and the other line is placed on hold this service is applied to the former line only two way connection line only NEAX2400 IPX Wireless Features and Specifications NDA 24313 Issue 1 Interactions Call Forwarding Dropped Calls C 161 1 When a Squelch Disconnection occurs during a two way connection between a PS and a station including PS the following ensue according to the assigned service s d PS When AUTOMATIC ANNOUNCEMENT CALLED PS OUT OF ZONE is assigned to the Squelch PS The party not the Squelch PS hears the announce
59. ification Presentation CLIP Connected Name Identification Presentation CONP Calling Number Display CCIS ptem Calling Number Display Calling Party Information Transfer Calling Party Number Name Assignment and Display Fm When the call is originated from PS To When the call terminates to PS X Available Not available X Available with limitations NEAX2400 IPX Wireless Features and Specifications NDA 24313 Issue 1 Page 9 General Service Features Series 7300 Series 7400 Stand Alone FCCS Stand Alone FCCS Feature Name Fm To Fm To Fm To Fm To Calling Party Recognition Service Call Forwarding All Calls Busy Line Don t Answer Calling Party Recognition Service DIT CCIS Networking via IP CCIS Tandem Call Calling Party Number CPN Delivery to ISDN amp Q SIG Networks CCSA Access Centralized Attendant Service CAS Centralized Billing CCIS Centralized Day Night Mode Change CCIS Centralized Maintenance CCIS Centralized System Management Report CCIS Centrex Compatibility Class of Service Individual Code Calling Access Combined Cable Pair for Simultaneous Voice and Data Consecutive Dialing Attendant Consecutive Sp
60. igination NEAX2400 IPX Wireless Features and Specifications Page 34 NDA 24313 Issue 1 I 39 Individual PS Calling 1 39 Individual PS Calling General Description This service allows the calling party to call the individual D PS series Operating Procedure 1 Dial the unique number assigned to each PS the designated D PS will be called If the calling number display is available the lower 12 digits of the number are displayed on the LCD of the called D PS The arrow is displayed to show that the upper digits are not displayed There are two answering options a Any key answering mode The called PS user presses any one of the keys numbers 0 to 9 or function keys to answer b Automatic answering mode The called D PS is connected automatically without ringing Service Conditions The D PS will be called in the calling area where its location had been registered If the D PS cannot be called as when the PS user is out of the service area an announcement can be provided to the calling party The DAT package is required for the caller and called node If the called D PS is out of the service area OUT OF CELL INDICATION is activated When all the speech channels of the zone transceiver in the Calling Area are busy either ANNOUNCEMENT PS OUT OF CELL or CALL FORWARDING PS OUT OF CELL is activated if allowed in the D PS service feature class If not allowed in the se
61. ing Station S 132 S 132 Speed Calling Station General Description This service allows the PS series user to dial certain frequently called numbers using 2 digit abbreviated call codes Operating Procedure The Speed Calling data is set via the user definable data assignment For detailed operation refer to the D PS User Guide Service Conditions 1 Each abbreviated call code can store a maximum of 40 digits the numbers 0 to 9 and the function keys A maximum of 20 call codes can be assigned 3 If PRESET DIALING when a wrong number is dialed it can be cleared by the CLR or CLEAR key NEAX2400 IPX Wireless Features and Specifications NDA 24313 Issue 1 Page 43 A 128 Automatic Announcement Disconnected PS Out Of Zone A 128 Automatic Announcement Disconnected PS Out Of Zone General Description When a talking PS series user moves Out of Zone that is the Wireless service area to have the progressing call disconnected the counterpart hears the announcement that the talks are disconnected due to the talking party moving Out of Zone This also can apply when the power of either D PS is OFF Operating Procedure No manual operation is required Service Conditions 1 This service is valid only in a two party call This service cannot be used when a call is placed on hold or conference calling participated in by three party or more is in progress DAT Digital Announcement Trunk circui
62. ing this feature e PADLOCK e Authorization Code Display Elimination 2 following are conditions when using My Line L1 and Sub Line L2 simultaneously Two Line Operation e When one line is connected and the other line is held the class of the held line is not changed remains the class before changeover and it is changed after returning to the original call When both lines are held the class changeover of earlier held line is invalid 3 Users cannot use the ISDN DATA COMMUNICATIONS 32 kbps service using Authorization Code Visitor PS of TTC Q 931a protocol Tie Line with PCS Roaming is not available NEAX2400 IPX Wireless Features and Specifications NDA 24313 Issue 1 Page 63 C 166 Call Park psi C 166 Call Park psi General Description This feature enables a PS user to Park a call C O line Tie Line station and PS by hooking and dialing a Call Park Access Code and by dialing the Call Park retrieval code and the telephone number that parked a call the parked call can easily be retrieved from any PS Station within the system If the user forgets to retrieve the parked call the automatic recall function informs the user Operating Procedure To park a call from PS 1 Go hooking press TRF key 2 Receive Special Dial Tone 3 Dial the Call Park Access Code 4 Receive Service Set Tone 5 Replace the handset To retrieve a parked call from the originating station Overlap sending pr
63. lone FCCS Feature Name To Fm To Fm To Fm To Account Code Account Code Attendant Accunet Access Add on Conference 8 Party Advice of Charge Receipt and Display of AOC from a Foreign Q SIG Network All Zone Paging Alternate Routing Alternate Routing PRI Analog CALLER ID Class SM Analog CALLER ID Station ANI CCIS 16 digit Announcement Service Announcement Service Attendant Announcement Service PRI Answer Hold Attendant Asynchronous Data Switching Asynchronous Data Switching CCIS Attendant Camp On with Tone Indication Attendant Camp On with Tone Indication CCIS Attendant Console Attendant Controlled Conference Attendant Controlled Conference CCIS Attendant Key Pad Attendant Lockout Attendant Loop Release Attendant Night Transfer Attendant Overflow Attendant Override Attendant Switched Data Calls Fm When the call is originated from PS To When the call terminates to PS X Available Not available X Available with limitations NEAX2400 IPX Wireless Features and Specifications NDA 24313 Issue 1 Page 5
64. lows the D user to use a PS as a Sub Station In this feature the 0 and PS are referred as Main Station and Sub Station respectively The main functions of this feature are as follows 1 Call Forwarding All Calls to PS When the D Main Station user presses the feature key or dials the access code Call Forwarding All Calls to PS Sub Station is set or cancelled This function can also be set or cancelled by dialing the access code from the PS Sub Station 2 Telephone Number Display Even if a call is connected to the PS Sub Station the telephone number of the Main Station is displayed on the other party s LCD 3 Billing Information Even if a call is originated from the PS Sub Station billing information is recorded as a call origination from the D Main station 4 Voice Mail Indication Even if a call is transferred from the PS Sub Station to the Voice Mail System the voice mail is recorded on the mail box of the D Main Station The system controls Message Waiting Indication on both the Main Station and PS Sub Station Operating Procedure To set from the D erm 1 While in idle state press the feature key for this feature The PS Transfer lamp lights on the D Main Station 2 All the calls to the D Main Station are forwarded to the PS Sub Station To cancel from the Der 1 While the Sub Station Transfer lamp lights press the feature key for this feature The PS Transfer
65. ment When this feature is assigned to the Squelch PS The disconnected call is forwarded to the target destination When this feature and AUTOMATIC ANNOUNCEMENT CALLED PS OUT OF ZONE are both assigned to the Squelch PS The disconnected call is forwarded to the target destination as this feature takes priority over AUTOMATIC ANNOUNCEMENT CALLED PS OUT OF ZONE If neither this feature and AUTOMATIC ANNOUNCEMENT CALLED PS OUT OF ZONE is assigned to the Squelch PS No measures are taken The party not the Squelch PS hears the Reorder Tone A call forwarded by this feature can be answered by the CALL PICKUP GROUP feature A call forwarded by this feature can be answered by the CALL PICKUP DIRECT feature The Call Waiting service is available for the call forwarded by this feature When a PS moves to a visitor PBX when roaming and it encounters a Squelch Disconnection this feature is not activated NEAX2400 IPX Wireless Features and Specifications NDA 24313 Issue 1 Page 59 1 40 ISDN Data Communications 32 kbps I 40 ISDN Data Communications 32 kbps General Description This feature enables a data terminal connected to a PS to develop the data communications via the 32 kbps unrestricted digital network By using this feature the PS connected terminals can communicate with the TA equipment available for V 110 or PCS Internet Access Forum Standard PIAFS and also with the terminals available via LAN See the exampl
66. mer T310 of the network side is expired the caller may hear the Announcement from network side In a FCCS network CALL FORW ARDING destination station must have a telephone number CALL FORWARDING PS INCOMING CALL INCOMPLETE is cancelled by system initialization if the data is not saved on the Hard Disk NEAX2400 IPX Wireless Features and Specifications NDA 24313 Issue 1 ptem PSII Two Line Operation D 155 D 155 ptem PSII Two Line Operation General Description This feature allows for the appearance of two lines on the line L1 and L2 keys of the PS Operating Procedure No manual operation is required Service Conditions 1 2 SO oos cd Oe ON 11 This feature is available for Series 7300 or later software Two kinds of lines can appear on the PS My Line and Sub Line These lines are associated with the telephone numbers assigned to the port on the interface circuit L1 key My Line L2 key SubLine When a PS becomes Out of Zone state while terminating to Sub Line the call is disconnected by release timer about one minute after When a PS user places a call on hold and presses the END key the line lamp on the PS goes OFF The PS is recalled when the recall timer expires Voice Mail Indication VMI is not available for Sub Line When a PS is connected to a PS Dual Hold is not available Blind Transfer to Sub Line is not available When one Line is connected Blind Transfer to the other line is not available Whe
67. n Transfer Rate User Information Layer 1 Protocol User Rate AFTER CONVERSION 64 kbps V 110 32 kbps Low Layer Compatibility Information Transfer Rate 64 kbps 2 When originating via Wireless Low Layer Compatibility element With User Information Layer 1 Protocol Bearer ELEMENT Information Transfer Rate User Information Layer 1 Protocol User Rate 32 kbps AFTER CONVERSION 64 kbps Low Layer Compatibility Information Transfer Rate User Information Layer 1 Protocol 32 kbps V 110 64 kbps V 110 3 When terminating to Wireless Low Layer Compatibility element 2 Without User Information Layer 1 Protocol Bearer ELEMENT Information Transfer Rate User Information Layer 1 Protocol User Rate INCOMING STN TRK AFTER CONVERSION Low Layer Compatibility Information Transfer Rate 4 When terminating to Wireless Low Layer Compatibility element With User Information Layer 1 Protocol Bearer ELEMENT Information Transfer Rate User Information Layer 1 Protocol User Rate AFTER CONVERSION Low Layer Compatibility Information Transfer Rate User Information Layer 1 Protocol NEAX2400 IPX Wireless Features and Specifications NDA 24313 Issue 1 Page 61 1 40 ISDN Data Communications 32 kbps Operating Procedure Use the ATD command for data sending origination and the ATA command for answering Service
68. n be set at each PS which is already provided with the CALL FORWARDING PS INCOMING CALL INCOMPLETE feature 2 The forwarding destination of CALL FORWARDING PS INCOMING CALL INCOMPLETE is also designated as the destination of this feature 3 This feature also can be cancelled by cancelling CALL FORWARDING PS INCOMING CALL INCOMPLETE However CALL FORWARDING PS INCOMING CALL INCOMPLETE is solely cancelled while this feature is maintained depending on the system data 4 After this feature is once in service the function of this feature is still maintained even if CALL FORWARDING PS INCOMING CALL INCOMPLETE service is restricted NEAX2400 IPX Wireless Features and Specifications NDA 24313 Issue 1 Page 57 C 161 Call Forwarding Dropped Calls Service Conditions cont d 5 10 11 12 13 14 15 16 17 18 19 20 2 22 Page 58 When a call is currently being transferred by this feature the forwarded party not the forwarding destination but the party first connected to the Squelch PS hears the Ringback Tone When this feature has been activated during a two way call between a PS and a station including PS the station now being transferred to the forwarding destination cannot use TRF HLD keys restriction is imposed This feature can be applied to abasic two way connection between a PS and a station including PS e abasic two way connection between a PS and a trunk analo
69. n transferring a call from a PS the PS cannot place the third party on Hold The PS cannot activate Call Hold while connected with the station holding another call A PS cannot activate Call Hold when a Call Waiting is set to the PS b the PS sets Call Waiting c Call Waiting is set to the station connected with the PS Call Waiting cannot be activated while the called PS is placed on Hold NEAX2400 IPX Wireless Features and Specifications NDA 24313 Issue 1 Page 47 N 43 Name Display Intra Node Call N 43 Name Display Intra Node Call General Description This feature allows a PS to indicate user information corresponding to the calling Physical Station Number while engaged in a station to station call Operating Procedure When originating a station to station call LCD display of the calling station H TARO DIR SPD LNR LCD display of the called station H TARO DIR SPD LNR When a station call has been transferred to another station by Call Forwarding All Calls Busy Line Don t Answer PS Incoming Incomplete LCD display of the calling station CF H TARO DIR SPD LNR LCD display of the called station CF M TARO DIR SPD LNR Service Conditions goes cov cA Page 48 This feature is available for Series 7300 or later software User information corresponding to the Physical Station Number that can be displayed on the LCD is a maximum of 16 digits User information is displayed on the LCD
70. ocedure 1 Gooff hook 25 Receive a Dial Tone 3 Dial the Call Park local retrieval code 4 The parked call is reconnected Enbloc sending procedure 1 Dial the Call Park local retrieval code 2 Gooff hook 3 The parked call is reconnected To retrieve a parked call from a different station Overlap sending procedure 1 Gooff hook 2 Receive Dial Tone 3 the Call Park remote retrieval code and the number of the station that parked the call 4 The parked call is reconnected Enbloc sending procedure When access code operation using enbloc sending is invalid 1 Dial the Call Park remote retrieval code 2 off hook 3 Dial the number of the station that parked the call 4 The parked call is reconnected When access code operation using enbloc sending is valid 1 Dial the Call Park remote retrieval code and the number of the station that parked the call 2 off hook 3 The parked call is reconnected NEAX2400 IPX Wireless Features and Specifications Page 64 NDA 24313 Issue 1 Call Park psi C 166 Service Conditions This feature is also available for Sub Line L2 of a two line D PS by using Two Line Operation The parked PS cannot hold a terminal A PS can park only one call at a time A PS cannot park an Attendant Console When the Call Park key of Attendant Console key pattern is valid and the Attendant Console is parking a PS the Attendant Console operator can ret
71. rieve the PS by dialing the Access Code and Individual Attendant Identification number which is assigned by Individual Attendant Access A E Note Attendant Console is not made to recall 6 When a PS which parks a call does not retrieve the call it is recalled after fixed time which depends Automatic Recall Timer When a PS parks a call via C O line and then the C O side goes on hook PBX does not detect the release however the COT can be released by Automatic Recall Timer 7 This feature can be used with all PSs within the system depending on Service Feature Restriction Class 8 When the parked PS encounters the squelch disconnection CALL FORWARDING DROPPED CALLS is not available even though it is set 9 If the PS recalled by Automatic Recall Timer is out of zone the parked PS user receives Reorder Tone ROT 10 Ifthe parked PS moves out of zone it is disconnected 11 The condition of TTC Q 931a protocol Tie Line with PCS Roaming is shown below HOME PBX VISITOR PBX PS parks a call Available Not Available PS retrieves a call Available Not Available PS is parked by terminal Available Available Note 1 When a visitor PS originates a call to PS Station that belongs to the same office the visitor PS cannot be parked Note 2 When a PS which parked a terminal moves to the visitor office and then it is recalled by Automatic Recall Timer the terminal receives Reorder Tone 12
72. ription This service allows the D PS series user to store the last five numbers dialed and to redial the numbers by pressing the REDIAL PAUSE or F3 key Operating Procedure To store the number l Using either OVERLAP DIALING or PRESET DIALING dial the desired number The number dialed is stored automatically To redial the stored number using OVERLAP DIALING 1 Press the SEND or L1 key then REDIAL PAUSE or key the newest stored number is displayed on the LCD digit by digit moving from right to left The displayed number is dialed automatically To redial the stored number using PRESET DIALING 1 Press the REDIAL PAUSE or F3 key the stored number is displayed on the LCD digit by digit moving from right to left By pressing the REDIAL PAUSE or F3 key repeatedly the second and the third numbers will be displayed successively 2 When the desired number is displayed press the SEND or L1 key The number is dialed automatically Service Conditions Ii A maximum of 40 digits the numbers 0 to 9 and the function keys can be stored 2 numbers are stored in the memory in the order they are dialed If the number identical to the one in the memory is dialed that number is recognized as the newest number and the one already stored will be erased Regardless of the number of times the same number is dialed it is stored only once NEAX2400 IPX Wireless Features and Specifications Page 42 NDA 24313 Issue 1 Speed Call
73. rvice feature class the D PS user receives Reorder Tone PS AUTHENTICATION is activated for every call termination The answering options the any key answering mode and the automatic answering mode can be selected by the D PS user using FNC key NEAX2400 IPX Wireless Features and Specifications NDA 24313 Issue 1 Page 35 H 23 Handover H 23 Handover General Description When speech transmission quality becomes inferior the D PS re originates a call automatically and seizes another radio channel making the PBX hand the call over to another zone transceiver to maintain speech quality Operating Procedure No manual operation is required The D PS series automatically sends HANDOVER request to the PBX Service Conditions 1 2 This service is activated when the D PS is engaged in communication The communication may be interrupted when the PBX hands the call over The interruption is usually within a second to a maximum of ten seconds This service is also available when 0 PS user moves to the far end of the radio zone and encounters inferior transmission quality In this case the D PS searches for the radio zone with the stronger electric field and if the radio zone is found HANDOVER is activated and the conversation is continued in that zone If there is no idle channel in the new radio zone the conversation is continued in the current zone until the communication becomes unavailable and AUT
74. s its location automatically to the Home PBX at the Visitor PBX via Q 931a connection PS can originate a call from the Visitor PBX A call terminating to the PS is transferred from the Home PBX to the Visitor PBX via Q 931a connection Service Conditions GU er ior aue e Note 10 11 12 This feature is available for the Series 7300 software This feature is available between the PBXs which are connected via Q 931a PS in the Visitor PBX cannot move to another PBX via FCCS connection SMDR outputs the PS number instead of the account code when the PS is in the Visitor PBX In the Visitor PBX PS cannot use supplementary services which need service access code However TRANSFER CALL HOLD and some ANNOUNCEMENT SERVICE are available If there is a TS between the Home PBX and Visitor PBX the TS must also have the roaming feature CF All Calls Busy Line PS Incoming Call Incomplete a CF AII Calls If PS assigns CF AII Calls at the Home PBX all the terminating calls are transferred PS can also originate a call from the Visitor PBX b CF Busy Line If PS is busy in the Visitor PBX the terminating call is transferred from the Home PBX c CF PS Incoming Call Incomplete If call termination to PS is incomplete in the Visitor PBX the incoming call is transferred from the Home PBX In the Visitor PBX pseudo PS Physical Station Number VISITOR PS PHYSICAL STATION NUMBER must be assigned by System Data In addition telephon
75. s not hear Out of Zone Announcement The calling party hears Busy Tone but is not allowed to try a call termination again If a PS user moves Out of Zone while talking with a subscriber of the Central Office line AUTOMATIC ANNOUNCEMENT DISCONNECTED PS OUT OF ZONE A 128 cannot be heard by the subscriber outside Busy Tone is heard When a call activated by AUTOMATED ATTENDANT is transferred to a certain PS or a station to which CALL FORWARDING PS INCOMING CALL IMCOMPLETE C 155 is set and when the transferred party is Out of Zone or in lock out state the calling party hears Busy Tone PS is not allowed to be handed over while ringing When the called PS is ringing with AUTOMATED ATTENDANT in service and at the same time its transceiver zone is switched over the PS stops ringing and the calling party hears Busy Tone This feature is not applicable using CALL TRANSFER ALL CALLS C 11 If the Attendant Console which received a call from a Central Office line is released while calling a PS the caller changes to the Central Office line side If in this situation the PS user moves to a place out of Zone the caller from the Central Office line continues hearing Busy Tone Call Waiting This service is valid in a two party call when call is terminated from station to station to PS to Central Office line or to Tie Line call but invalid when other services using switch hook flash are executed to the PS or when the PS is connected to
76. t Console the caller does not hear AUTOMATIC ANNOUNCEMENT CALLED PS OUT OF ZONE and hears the following tones DIT Ringback Tone is heard e REMOTE ACCESS TO SYSTEM Busy Tone is heard e AUTOMATED ATTENDANT Busy Tone is heard e ATTENDANT CONSOLE Busy Tone is heard e ISDN DID ADDRESSING Announcement of ISDN PSTN is heard One system is given one kind of recorded message for AUTOMATIC ANNOUNCEMENT CALLED PS OUT OF ZONE On the condition that both AUTOMATIC ANNOUNCEMENT CALLED PS OUT OF ZONE and CALL FORWARDING PS INCOMING CALL INCOMPLETE are assigned to a PS priority is given to CALL FORWARDING PS INCOMING CALL INCOMPLETE If an incoming call terminated at the very moment when 0 PS series user is setting CALL FORWARDING PS INCOMING CALL INCOMPLETE with a Pre Set Dialing before OFF HOOK the procedure so far becomes invalid If the another transfer service is set to the target destination party of CALL FORWARDING PS INCOMING CALL INCOMPLETE the call is transferred to the last end party When a call is transferred to another D PS activated by CALL FORWARDING PS INCOMING CALL INCOMPLETE and when the call termination is not completed the call can be transferred to another destination party if the CALL FORWARDING PS INCOMING CALL INCOMPLETE is set If the AUTOMATIC ANNOUNCEMENT CALLED PS OUT OF ZONE is assigned the caller hears the announcement When both CALL FORWARDING PS INCOMING CALL INCOMPLETE and AUTOMATIC AN
77. t card can be used as an announcement trunk 3 AUTOMATIC ANNOUNCMENT DISCONNECTED PS OUT OF ZONE is not applied to the cases where calls are in progress via a COT line or Attendant Console A C O line subscriber hears Reorder Tone and a caller via the Attendant Console encounters Busy Tone 4 Ina FCCS network every node must one or more announcement trunk s NEAX2400 IPX Wireless Features and Specifications Page 44 NDA 24313 Issue 1 Automatic Announcement Called PS Out of Zone A 129 A 129 Automatic Announcement Called PS Out of Zone C 155 Call Forwarding PS Incoming Call Incomplete General Description When call cannot be terminated due to the called PS series which is Out of ZT or whose power is OFF the system automatically answers the call and provides an announcement to notify the calling party that the called D PS is Out of Zone or if the CALL FORWARDING PS INCOMING CALL INCOMPLETE is set to a given destination the aborted call can be transferred to the pre programmed station PS Operating Procedure No manual operation is required Service Conditions 1 CALL FORWARDING PS INCOMING CALL INCOMPLETE can be programmed and cancelled by the D PS with pressing Access Code transferred telephone number Note In the case where the D PS is Out of Zone or its power is OFF and the call is an incoming call from the Central Office directly or the Central Office call via the Attendan
78. the buffer using the function key Then the PS automatically requests STM server to retransmit the STM Service Conditions Qucm aem e Note 9 Page 68 This feature is available only for My Line L1 of a two line PS not provided for Sub Line L2 This feature is provided in the same form as that for call termination STM message transmission route is only one way STM server PS An STM can contain 128 byte data in the maximum The following are not available in this feature e Call Forwarding All Calls e Call Forwarding Don t Answer e Call Forwarding Busy Line e Call Forwarding PS Incoming Call Incomplete This feature is counted as ZT peg count If the following occur STM is not distributed but stays in the mail box of the STM server The STM is safely transmitted later by this feature s retransmission function e Addressee PS is out of zone e Addressee PS has a power down e line of addressee PS is busy e PS is ina state of hand over Note When hand over unexpectedly starts while the message transmission is partially in progress this feature sees this as a squelch disconnection and performs message retransmission after the hand over is completed Wireless Roaming is not available in this feature More than STM server cannot be transmitted to a single PS simultaneously Only the earliest STM can be sent safely NEAX2400 IPX Wireless Features and Specifications NDA 24313 Issue 1 Short Text Messaging
79. the number the numbers dialed before the timer will be sent out 5 For every call origination PS AUTHENTICATION is activated 6 The pS to D PS calls cannot be recorded for the SMDR NEAX2400 IPX Wireless Features and Specifications NDA 24313 Issue 1 Page 33 P 63 Preset Dialing P 63 Preset Dialing General Description This service allows the D PS series user to confirm the numbers to be dialed before originating calls Operating Procedure To originate a call 1 Dial the desired number The number is stored and displayed on the LCD 2 After confirming the numbers press the SEND or L1 key The numbers are displayed on the LCD throughout the conversation Service Conditions 1 A maximum of 24 digits numbers 0 to 9 and pause can be stored A maximum of 12 digits can be displayed on the LCD When more than 12 digits are dialed the digits move from right to left displaying only the most recently dialed digits 2 Ifa wrong number is dialed press the CLR or CLEAR key The number just dialed will be erased If the CLR or CLEAR key is pressed for more than two seconds the numbers will be erased successively Also if no number is entered for 20 seconds the service is cleared and D PS returns to the idle state stand by status 3 If the user dials a number after pressing the SEND or LI L2 key it will be recognized as a PB signal sending 4 PS AUTHENTICATION is activated for every call or
80. tification PRI Incoming Central Office Call to Tie Line Connection Incoming ISDN Call to Tie Line Connection PRI Indialing through Main PRI Individual Attendant Access Individual Attendant Access CCIS Individual Trunk Access Individual Trunk Access CCIS Intercom Calling Intermediate Station Number Display ptem Internal Zone Paging Inter Office Off Hook Queuing Inter Office Off Hook Queuing PRI Inter PBX Coordinated Station Numbering Plan PRI Inter Position Transfer Inter Position Transfer CCIS Inter Modem Pooling ISDN Individual Calling Line Identification ICLID Keyboard Dialing Data Adapter ptem Keyboard Dialing Data Module Keypad Dialing Lamp Check Fm When the call is originated from PS When the call terminates to PS X Available Not available X Available with limitations NEAX2400 IPX Wireless Features and Specifications NDA 24313 Issue 1 Page 15 General Service Features Series 7300 Series 7400 Stand Alone FCCS Stand Alone FCCS Feature Name Fm To Fm To Fm To Fm To Last Number Call Last Number Call Last Number Call PRI Last Number Call PRI LCR Attendant Manual Override PRI LCR
81. ve Special Dial Tone The called number displayed on the LCD while engaged in a call will go out when the TRF or F2 key is pressed The called party hears music via the external source 2 Toretrieve the call press the TRF or F2 key again The called party number will not be displayed on the LCD again Service Conditions 1 When the PS user presses the END key while holding the call without dialing any key the held party receives Reorder Tone and the connection is released If the D PS user has dialed one or more keys before pressing the END key while holding the call the user is called back NEAX2400 IPX Wireless Features and Specifications Page 38 NDA 24313 Issue 1 Flexible PS Numbering F 34 F 34 Flexible PS Numbering General Description Each D PS series is assigned an unique number Operating Procedure No manual operation is required The data is entered via the maintenance administration terminal Service Conditions 1 maximum of nine digits can be assigned for a D PS number including and The D ps numbers must be assigned in uniform number of digits NEAX2400 IPX Wireless Features and Specifications NDA 24313 Issue 1 Page 39 P 64 PS Service Class P 64 PS Service Class P 65 PS Restriction Class General Description This service permits all the D PS series to be assigned a class of service in accordance with the degree of the system use desired Operating Procedure No manual oper

Download Pdf Manuals

image

Related Search

Related Contents

Hitachi 50UX57B 50" Rear Projection Television  Montageanleitung für den Solarkocher Premium11  User Manual  teléfono Android  組立・取扱 説明書  CLS USER'S GUIDE - Canadian Light Source    

Copyright © All rights reserved.
Failed to retrieve file