Home

NEC Express5800/R110f-1E User Guide

1. File Locations Backup File CAProgram Files E NBRMIC Configuration Browse Restore Target Jh FRU Information v include UID Require to reboot the server i BIOS Information Require to reboot the server W EMC Information Description File Locations_______ Set the locations of file Backup File The backup file is displayed ___ Browse It changes the backup file Restore Target Select the restore target FRU Information Select whether restore FRU Information or not Only when the target _ Information exists in the file you are able to select this item include UUID When you restore FRU Information select whether restore UUID or not Only when FRU Information is selected and the target information exists in L the file you are able to select this item 1 4 BIOS Information Select whether restore BIOS Information or not Only when the target er information exists in the file you are able to select this item BMC Information Select whether restore BMC Information or not Only when the target information exists in the file you are able to select this item 1 When you restore UUID BMC will be reset To reflect the setting it is necessary to reboot the server IMPORTANT e This operation may cause data destruction Other than the server s administrator and maintenance person please do not run e You need backup file in the Backup function
2. wow period comma and 3 It is possible to set from 4 to 31 half size alphanumeric characters except for quotation marks and Y 29 BMC Configuration User s Guide 4 2 8 Mail Alert This screen displays and sets the alert by E mail from BMC BMC Configuration SMMP Alert System Operation ECO Control Miscellaneous Network Service User Account Active Directory LDAP Mal Alert Mal Alert TER ert Tes Alert C Enable e Disable Response time of SMTP server Required 0 seconds 30 600 M ail Iw Tol Required Te2 Required Tod Required From Reply To Subject SMTP Server SMTP Server IP Address ar Oman Hame SMTP Fort Required 25 1 65535 SMTP Authentication C Enable Disable I eee RAM ke ORN Pee ATA Default Value BMC Configuration SMMP Alert System Operation ECO Control Miscellaneous Network Service User Account Active Directory LDAP Mal Alert SMTP Pot Required 25 1 65535 al SMTP Authentication C Enable Disable CRAM MOG LOGIN Re PLAIN User Mame Required REM Password Required Ir Alert Level Alert Level Erar wWarming x Tol Tare To TemperaturelMonitoring Threshold Error RI Wang E Information ES Voltage Monitonng Threshold 2434 134 143 aa Tad 13 Error e Warning E Information m FAN Speed Error Warming 4 H Default salue 30 BMC
3. Default Value Host Name Set the Host Name 5 6 Domain Name Set the Domain Name 6 Access Limitation Access Limitation setting Access Select the Access Limitation Type Allow All BE Limitation Type Allow All Access to BMC is not limited Allow Address Set the IP Address that is allowed to access BMC Deny Address LE the IP Address that is limited to access BMC u n IP Address Set the IP Address to allow or deny to access with BMC 7 8 It is not possible to change for ft Server 2 When the Subnet Mask is wrong setting error message such as Failed to apply configuration is displayed 3 It is possible to set when DHCP is Disable 4 t is possible to set when DHCP is Enable 5 The length of Host Name must be less than 64 characters Host Name will be truncated to 63 characters if you input over 63 characters 6 Host Name and Domain Name should be within total of 255 characters 7 The range of IP address to Allow or Deny access is delimited by Comma With regard to the setting of Deny access Asterisk can be described as a wild card ex 192 168 1 192 168 2 1 192 168 2 254 8 It is possible to set when Access Limitation Type is Allowed Address or Denied Address The length must be less than 255 characters 56 BMC Configuration User s Guide 5 2 2 Service This screen displays and sets the list of the service of BMC BMC Configuration Mal Alert
4. Power On iDConalways mE Delay Time Set the value or specify the Random The range is from Minimum value Minimum value to 600 Sec 3 PEF PEF setting Platform Event Filter Select Enable Disable of Platform Event Filter 4 Enbe Management Software Management Software setting 41 BMC Configuration User s Guide ESMPRO Management Select Enable Disable of ESMPRO Management 5 __ Current value Authentication Key Set the Authentication Key 6 7_ guest Redirection Select Enable Disable of Redirection 6 Enable If Redirection is set to Enable BIOS Redirection Port in Console Redirection Configuration of BIOS is set to Serial Port B When this item is changed to from Overwrite oldest SEL all log records in the SEL Repository are cleared 2 When the Standby Power Save function of System BIOS is Enable it is set to Power On And the default value is changed to Power On 3 It 1s not possible to set when AC Link is Stay Off or the system is Blade Server Delay time from turning on AC to turning on DC is specified It is possible to set up to 600 seconds Minimum value is different according to the system It is possible to set Random when the system supports it 4 Enable and Disable of the report function from BMC are set It makes SNMP Alert be impossible when it sets to Disable 5 When BMC can be managed directly from NEC ESMPRO Manager Ver 5 4 or l
5. Remote Media Remote Media setting ciclo Select Enable Disable of Encryption 1 Enable Remote CD DVD Port Set the Remote CD DVD Port when Encryption is 5120 No Encryption J enabled cl Remote USB Memory Port Remote USB Memory Port is displayed Remote CD DVD Port 2 cc Remote FD Port is displayed Remote CD DVD Port 3 ee Remote CD DVD Port Set the Remote CD DVD Port when Encryption is 5124 _ Encryption Remote USB Memory Port Remote USB Memory Port is displayed Encryption Remote CD DVD Port 2 Le Remote FD Port Remote FD Port is displayed Encryption Remote CD DVD Port 3 Each port number must not overlap 2 When OS is Windows the Absolute mode is recommended The Relative mode is recommended for Linux 3 When the language of OS is Japanese the default value is Japanese JP 35 BMC Configuration User s Guide 4 2 11 ECO This screen displays and sets the items concerning the power consumption and the system load BMC Configuration Network Service User amp ccount Active Directory LDAP Mal Alert SNMP Alert System Operation ECO Control Miscellaneous v Aggressive Mode ECU Info Power Threshold Pa Required Correction time limit Shutdown System 250 w 240 250 Sec 1 600 Required v Mon Aggressive Mode Power Threshald Pn Required Correction time limit
6. SMMP Alert System Operation Control Miscellaneous Network servicell Network Service User Account Active Director LDAP Madufying the setting in this screen will tum the connection with the BMC aff Web Server HTTP Enable Disable HTTP Port Required Jon H HTTPS Enable Disable HTTPS Port Required 443 1 65535 HTTP cannot be set enabled singularly Enable Disable SSH Port Required 22 1 65535 Default salue Cancel Item Descri option Default Value Web Server HTTP Select Enable Disable of HTTP 1 Enable HTTP Port Set the HTTP Port 2 3 80 HTTPS Select Enable Disable of HTTPS Enable HTTPS Port Set the HTTPS Port 2 3 443 Select Enable Disable of SSH Enable SSH Port Set the SSH Port 2 3 22 If HTTP is set Enable HTTPS is also set Enable automatically You can not set HTTP alone to enable 2 It is possible to set when each port is set to enable 3 Each port number must not overlap 57 BMC Configuration User s Guide 5 2 3 User Account This screen displays and sets the users who use BMC It is possible to register up to 12 users or less BMC Configuration Mal Alert SNMF Alert System Operation Control Miscellaneous Network Sericel Network Service User Account Active Director LDAP User amp ccount No User Mame Privilege Operation LD c3 M cm Am fo Fb Cancel ltem D
7. Mail Alert User Account No User Mame Privilege Operation L LD c w M OI P c2 P User Name The user name is displayed Privilege The privilege of the user is displayed Add or change user information Delete user information 1 It is possible to delete only for the existing user CHECK e n Off line Tool you can delete user information at the next user settings screen 24 BMC Configuration User s Guide 4 2 4 User This screen sets the selected user User No 1 Enbe Disable User Marne Required Administrator Password Required E Confirm Password Required dreck Privilege Admaristrator m Default Cancel Select Enable Disable of User 1 Enable User Name Set the User Name 2 Blank Password Set the Password of the User 3 Blank Confirm Password Blank Privilege Select the privilege of the User 4 Administrator Administrator Operator User 1 Itis possible to set only for the existing user 2 It is possible to set less than 15 half size alphanumeric characters minus sign and _ underscore minus sign can not use top character of User Name root null MWA AccessByEM Poem and already registered name in other number can not use 3 It is possible to set less than 19 ASCII characters except for space quotation marks amp e H and E 4 The privilege is as follows Y EE S m FA D a LU
8. Remote CD DVD Port Set the Remote CD DVD Port when Encryption is 5120 No Encryption J enabled cl Remote USB Memory Port Remote USB Memory Port is displayed Remote CD DVD Port 2 cc Remote FD Port is displayed Remote CD DVD Port 3 ee Remote CD DVD Port Set the Remote CD DVD Port when Encryption is 5124 _ Encryption Remote USB Memory Port Remote USB Memory Port is displayed Encryption Remote CD DVD Port 2 Le Remote FD Port Remote FD Port is displayed Encryption Remote CD DVD Port 3 Each port number must not overlap 2 When OS is Windows the Absolute mode is recommended The Relative mode is recommended for Linux 3 When the language of OS is Japanese the default value is Japanese JP 69 BMC Configuration User s Guide 5 2 11 Control Control the managed server This setting is applied at the next booting time of the managed server BMC Configuration Network Serviced Network Service Uzer Account Active Directory LDAP Mail Alert SNMF Alert System Operation Control Miscellaneous One Time Boot Device Boot No Change Default salue Cancel Description Default Value One Time Boot Device One Time Boot Device setting Boot Device 1 Select the Device used at next boot No Change 1 The Boot Devices are as follows Boot Device Description No Change It follows the setting of System BIOS of
9. the power recovery 2 4 Set the timeout period until the boot IS complete 0 after DC ON 2 3 5 1 The POWER Switch should be configured to shutdown in the OS 2 It is possible to set only if Shutdown at power lost is set to Enable 3 The battery output period may be briefer in duration than the each configured time in this item depending on the remaining charge 4 This item is valid only when AC LINK is set Stay Off or AC LINK is set Last State and Last State is DC OFF 5 This item is valid at DC ON after the shutdown system by Shutdown at power lost DC ON by Boot after power recovery or manually 48 BMC Configuration User s Guide 4 5 Backup Back up the configurations to files Select the back up target and click OK File Locations Folder C Program FilesiBMIC Configurationyson Browse Backup Target User IvIanagement CAPrograrn FilestBIMC Configurationljson useraccount j Network CAProgram Files BMIC_Configurationtjsoninetwork json Aer geess FissiBMC_Configuatinonent eon System Operation CAProgram FilesiBMC_Configurationtisontoperation jso Miscellaneous CAProgram FilestBIMIC Configurationjsonbasic json Battery CAProgram FilesiB MC Configurstionljsonlbattery json Description File Locations Set the location of backup files VENETA Folder ____________ The preservation folder of the file is displayed Browse It changes the preservation folder Backup Tar
10. A H P Frivilege Ei vescription Administrator Users who have an administrative account and are allowed to perform any operation Operator Users who can operate the system except session management registration of license Remote KVM Media whole settings and update User General users who are only allowed to access the IPMI Information 25 H BMC Configuration User s Guide 4 2 5 Active Directory This screen displays and sets the Active Directory BMC Configuration SAMP Alert System Operation ECO Control Miscellaneous Network Service User Account Active Directory LDAP Mal Alert Active Directory Active Directory Authentication Ge Enable Disable User Domain Name Required Timeout Required f A seconds 15 300 Iv Domain Controller Server Address Required Domain Controller Server Address eech Domain Controller Server Address3 Required Group No Group Marne Group Domain Privilege Operation item 7 Active Directory GE Active Directory Select Enable Disable of Active Directory Authentication Disable Authentication User Domain Name Set the user domain name used by Active Directory Blank EIL Ds C c eee ame Timeout Set the timeout period with domain controller 1 120 Domain Controller Select Enable Disable of Domain Controller Server Loi Enable Server 1 WC Server Addre
11. A N ON 76 6 2 ESMPRO Mana cement E 17 7 Precautions Tor US eet ne Nn NT SNP RO M ORI ME E MEM MU M 78 7 1 BMC Configuration installatioft its iba 78 4 2 ATTE FAV TRS Seti csc etse e E 78 Y A AE PP E E EE 78 Ji PER eet and SNMP A SEH 78 FS A o e LL I EA 78 VE A e c ee 78 yov PCOS en T 79 7 0 Manasement CLAN sett ne e 79 y Derse N LI E 79 BMC Configuration User s Guide Trademarks NEC ESMPRO and EXPRESSBUILDER are trademarks of NEC Corporation Microsoft Windows Windows Vista and Windows Server are registered trademarks or trademarks of Microsoft Corporation in the United States and other countries Linux is the registered trademark of Linus Torvalds in the U S and other countries Red Hat is registered trademarks of Red Hat Inc and its subsidiaries in the United States and other countries Novell Novell logo and SUSE are registered trademarks of Novell Inc in the United States and other countries All other product brand or trade names used in this publication are the trademarks or registered trademarks of their respective trademark owners Windows 2012 stands for Microsoft Windows Server 2012 Standard Edition operating system and Microsoft Windows Server 2012 Datacenter operating system Windows 2008 R2 stands for Microsoft Windows Server 2008 R2 Standard operating system Microsoft Windows Server 2008 R2 Enterprise Operating system and Microsoft Windows Server 2008 R2 Datacenter operating sy
12. Alert is enabled one or more of the addresses should be enable 5 It is possible to set when each Alert Receiver is Enable 6 The Alert Level are as follows Alert Level When Error is detected in each sensor type the alert is sent to the checked address Error Warning When Error or Warning is detected in each sensor type the alert is sent to the checked address Error Warning Information When Error Warning or Information is detected in each sensor type the alert is sent to the checked address Separate Setting You can arbitrarily select the event to alert in each sensor type 33 BMC Configuration User s Guide 4 2 10 System Operation This screen displays and sets the Remote KVM console and the Remote Media BMC Configuration LDAP Network Service User amp ccount Active Directory SNMP Alert System Operation Eco Control Remote EV Console Encryption Enable Disable Port No Encryption Required 7578 1024 65535 Port Encreption Required 7582 1024 65535 Mouse Cursor Mode C Singe Dual Mouse Coordinate Mode C Relative Ce Absolute When server UD is Microsoft Windows Absolute Mode Is recommended When UG is Linux Relative Mode Is recommended keyboard Language English 0 5 hi Remote Media Encryption Enable Disable Ho Mo Encryption Remote CD DVD Required 5120 1024 65532 Remote USB Memory 5
13. Driver by the following command etc init d ipmi start And you can start OpenIPMI Driver automatically at the system booting to execute the following command and reboot the operation system chkconfig ipmi on 10 BMC Configuration User s Guide 3 Installation 3 1 BMC Configuration Installation for Windows Explain the installation of BMC Configuration 3 1 1 Check before installation Check the followings See chapter 2 to check the system requirement Login to Windows as Administrator 3 1 2 Start installation menu B If you install BMC Configuration by using downloaded modules After unzipping the downloaded modules please execute the following file BMC Configuration installation will be started bmc_config setup exe B If you install BMC Configuration by using EXPRESSBUILDER You can install BMC Configuration as follows 1 Insert EXPRESSBUILDER into the DVD drive on the managed server which Windows has started Autorun Menu will be displayed e If Autorun Menu does not launch double click autorun dispatcher exe from EXPRESSBUILDER x64 Edition dispatcher_x64 exe e Ifthe device selection window is displayed select the device you are using 11 BMC Configuration User s Guide 3 1 3 Install BMC Configuration 1 The BMC Configuration installer is started Click Next BMC Configuration 1 00 Welcome to the InstallShield Wizard for BHC Configuration The InstallShield Wizard will
14. PMO ento con bmecont The following screen shows example 4 ain Menu L 4 set ESMPRO Management Exit Enter select F12 help e Refer to the following to see BMC Configuration help information Open the setting of BMC Configuration and press F12 key on the screen displayed F12 help at the bottom 76 BMC Configuration User s Guide 6 2 ESMPRO Management This screen sets the managed server for remote management with NEC ESMPRO Manager Def ault gt Cance ESMPRO Management X Setting to manage from NEC ESMPRO Authentication Key Set the Authentication Key 1 1 Itis Authentication key when managing from NEC ESMPRO Manager Ver 5 65 or later It is possible to set less than 16 half size alphanumeric characters TI BMC Configuration User s Guide 7 Precautions for Use 7 1 BMC Configuration installation BMC Configuration Installer Windows amp Linux can not downgrade to the older version If you want to use the older version uninstall the current version and then install older version Note All the registered information will be deleted as the result of the uninstalling BMC Configuration Windows Installer may indicate a message that requests some disk if you upgrade the BMC Configuration with the installer on CD ROM DVD ROM In this case copy the installer on the HDD and then upgrade 7 2 HTTP HTTPS settings HTTP alone
15. The libraries listed below are External Libraries Notwithstanding any of the terms in the Agreement or any other agreement you may have with NEC a Suppliers provide the libraries WITHOUT WARRANTIES OF ANY KIND and such Suppliers DISCLAIM ANY AND ALL EXPRESS AND IMPLIED WARRANTIES AND CONDITIONS INCLUDING BUT NOT LIMITED TO THE WARRANTY OF TITLE NON INFRINGEMENT OR INTERFERENCE AND THE IMPLIED WARRANTIES AND CONDITIONS OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE WITH RESPECT TO THE EXTERNAL LIBRARIES b In no event are the Suppliers liable for any direct indirect incidental special exemplary punitive or consequential damages including but not limited to lost data lost savings and lost profits with respect to the External Libraries and c NEC and the Suppliers are not liable to you and will not defend indemnify or hold you harmless for any claims arising from or related to the External Libraries The following are External Libraries and their Copyright libnewt libslang Copyright 1991 Free Software Foundation Inc json c Copyright 2004 2005 Metaparadigm Pte Ltd zlib Copyright 1995 2005 Jean loup Gailly and Mark Adler B Notes 1 No part of this document may be reproduced in any form without the prior written permission of NEC Corporation 2 The contents of this document may be revised without prior notice 3 The contents of this document shall not be copied or altered without the p
16. W required for charging is displayed mE wo If the approximate backup time is unknown is displayed 2 Approximate Backup Time at Full Charge is a reference value when the server s environment temperature is 25 degrees Celsius This value may be different from actual operating time caused by temperature differences 47 BMC Configuration User s Guide 4 4 3 Battery Controller Configuration This screen displays and sets the various functions of the battery controller Battery Controller Configuration Battery Controller shutdown at power lost Enable C Disable shutdown delay tune Required 10 seconds 0 255 Battery tum off delay time Required ell Seconds 0 3600 The power switch should be configured to shutdown m the 05 Boot after power recovery Enable C Disable Tlus gem is valid only when AC LIME is set Stay OHT or AC UNE is set Last State and Last State is DC OFF Boot timeout after DC ON Required 0 seconds 0 36007 Default Value Battery Controller Configuration Shutdown at power lost Shutdown d delay time L mm vm mm mm Battery turn off delay time Boot after power recovery Boot timeout after DC ON Apply Cancel ription Default Value TET Controller setting Select Enable Disable of the ability to shutdown Disable finished at the power failure 2 3 Select Enable Disable of the ability to boot after
17. e Off line TOOL has no restore function 74 BMC Configuration User s Guide 5 5 BMC Initialization If you select BMC Initialization on Off line TOOL you can restore all of BMC Configuration parameters to the default settings except for the part It will take about one minute to restart BMC IMPORTANT e This operation may cause data destruction e This operation is only possible on Off line TOOL e This operation is initialized both CPU IO moduleO and CPU IO modulel e The following settings are not initialized Control SEL and Power Restore Delay in Miscellaneous 5 6 Reset BMC If you select Reset BMC on Off line TOOL you can reset BMC It will take about one minute to restart BMC IMPORTANT e Please use it when you can not operate the BMC functions correctly or if necessary e This operation does not clear the configuration settings e This operation is only possible on Off line TOOL e This operation is different in CPU IO module0 and CPU IO modulel 75 BMC Configuration User s Guide 6 Functions for the highly parallel computing server This chapter describes the functions of BMC Configuration of if you use the highly parallel computing server NEC Express5800 HR120a 1 Please refer to chapter 4 when you use a standard server 6 1 Start procedure 6 1 1 OnLinux After the installation is completed do the following operation as root user to open the setting function of BMC Configuration Sp nec
18. is full Stop logging SEL SEL is not recorded any more Clear all SEL Delete all SEL and record SEL newly Overwrite oldest SEL Old SEL is overwritten with new SEL Power Restore Delay Power Restore Delay setting AC Link Select the AC Link setting Last State Stay Off DC is not turned on Last State It becomes the same as time when AC was turned off Power On iDConalways nm Delay Time Set the value or specify the Random The range is from Minimum value Minimum value to 600 Sec 2 PEF PEF setting Platform Event Filter select Enable Disable of Platform Event Filter 3 Enable Besse Management Software Management Software setting 71 BMC Configuration User s Guide tem Description Default Value ESMPRO Management Select Enable Disable of ESMPRO Management 4 Current value Authentication Key Set the Authentication Key 5 6 guest Redirection Select Enable Disable of Redirection 5 Enable If Redirection is set to Enable BIOS Redirection Port in Console Redirection Configuration of BIOS is set to Serial Port B When this item is changed to from Overwrite oldest SEL all log records in the SEL Repository are cleared 2 It is not possible to set when AC Link is Stay Off Delay time from turning on AC to turning on DC is specified It is possible to set up to 600 seconds Minimum value is different according to the system It is possibl
19. select the event and the address To X to alert in each sensor type 3l BMC Configuration User s Guide 4 2 9 SNMP Alert This screen displays and sets the alert by SNMP from BMC BMC Configuration Network Service User amp ccount Active Directory LDAP Mal Alert SNMP Alert System Operation ECO Control Miscellaneous SNMP Alert Alert Enable Disable Computer Name Community Mame public Alert Process One Alert Receiver All Alert Receivers Alert Acknowledge Enable Disable Alert Retry Court 3 times 0 7 Alert Timeout E seconds 3 30 Alert Receiver v Primam IP Address Required 0 0 0 0 Secondary IP Address Required 0 0 0 0 Tertiary IP Address Heauired 0 0 0 0 Alert Level Alert Level Erow aming v a soo nde ges oe I Alert Test Default Value BMC Configuration Network Service User amp ccount Active Directory LDAP Mal Alert SNMP Alert System Operation ECO Control Miscellaneous Aler Receiver fw Primary IP Address Required 0 0 0 0 Secondary IP Address Fequired Joooo Tertiary IP Address Heauired 0 0 0 0 Alert Level Alert Level Errar w arning bd Error Warning Information Temperature Moritonng Threshold Voltage Monitoning Threshold FAN Speed Cooling Device Monitoring Threshold x lt 1 lt 1 SI XI X XI 51 I Temperature h anitaring amp bnormal State
20. setting values such as IP addresses on screen images are not guaranteed for operation In this document expresses back slash B About Symbols in This Document The following explains three symbols that are used in this document IMPORTANT Points or particular notes you must follow when handling software of servers CHECK Points or notes you need to check when handling software or servers TIPS Useful information BMC Configuration User s Guide L Summary BMC Configuration is software that works on the managed server It configures BMC on the managed server l l BMC Configuration Functions 1 1 1 NEC Express5800 series BMC Configuration You can specify the configurations to the managed server s BMC BIOS Configuration You can configure the System BIOS settings on the managed server The settings are effective by rebooting the server Battery Configuration If the managed server is equipped with a battery you can check and configure the information of the battery Backup You can output the configurations on the managed server to files Restore You can apply the configurations which are backed up in files on the managed server Clear BMC SEL You can clear the SEL System Event Log information of BMC BMC Configuration Initialization You can clear the configurations to the ex factory settings Reset BMC You can restart BMC without system rebooting System Information Version Information The versions of BM
21. 1 dei Remote FD D En Default Value BMC Configuration Network Service User amp ccount Active Directory SNMP Alert System Operation Eco Control Mouse Cursor Mode C Singe Dual Mouse Coordinate Mode Relative Absolute When server OS is Microsoft Windows Absolute Mode Is recommended When 05 is Linux Relative Mode Is recommended Kevboard Language Enalish LI5 Remote Media Encryption Enable Disable Port Mo Encryption Remote LD D VD Required 5120 1024 65532 Remote USB Memory D ER Remote FD 51 ER Port Encryption Remote CD ADM Required D 2d 1024 55532 Remote USB Memory D 26 Remote FD D 2 Default Value 34 LDAP Mai let Miscellaneous Mai let Miscellaneous Cancel BMC Configuration User s Guide Remote KVM Console Remote KVM Console setting Select Enable Disable of Encryption Enable Port No Encryption Set the Remote KVM Console Port when Encryption 7578 Port Encryption Set the Remote KVM Console Port when Encryption 7582 Mouse Cursor Mode Select the mode of the mouse cursor Dual Single E n A Mouse Coordinate Mode Select the mode of expression of coordinates of the Windows mouse cursor 2 Absolute Relative Linux Off line e ee DDeOuke SC Keyboard Language Select the Keyboard Language English US 3 Japanese JP English US French FR German DE
22. 2 02 29 2012 05 24 2012 08 21 2012 11 12 2012 11 16 2013 02 13 2013 04 03 Initial edition Adds ECO setting Precautions Adds Management LAN setting Precautions Adds required packages by Red Hat Enterprise Linux Server 6 x64 Changes cover Corrects writing errors Changes Mail Alert and ECO setting Changes ECO setting Precautions Corrects writing errors Adds User Account User Active Directory Group LDAP and System Operation setting Changes Network ECO and Miscellaneous setting Adds Clear BMC SEL Changes BMC Initialization Adds Default setting Precautions Corrects writing errors Adds the old item name of ECO setting Changes Installation Corrects writing errors Adds Functions for ft Server Changes System Requirements Corrects writing errors Changes System Requirements Changes ECO setting Changes BMC Initialization Changes Default setting Precautions Corrects writing errors Changes Summary and System Requirements Changes the menu and the item name Adds Battery Configuration Changes Default setting Precautions Corrects writing errors Adds Functions for The highly parallel computing server HR120a 1 Corrects writing errors Changes ECO setting Changes Default setting Precautions Corrects writing errors 80 BMC Configuration User s Guide BMC Configuration User s Guide NEC Corporation 2011 2013 81
23. 240 un 30 250 10 Sec 1 600 Required Dale Power Capping v Power Reading Timeout Boot Time Configuration Performance Optimized Power Optimized Required lo 0 5 Performance Made Disable CPU Cores Default Value Description Default Value Aggressive Mode brings the system power consumption under the specified upper limit threshold This function reduces power consumption by changing CPU clock throttling CPU clock and throttling Memory clock instead of lowering the system performance If the power consumption has been exceeded over the Power Threshold Pa during the period specified in the Correction time limit it will be able to generate System Event Log send alert and Shutdown System Aggressive Mode Critical Power Cap Aggressive Mode Disable Select Enable Disable of Aggressive Mode Critical Power Cap Power Threshold Pa Set the Power consumption upper limit threshold of Maximum i I I i i i i i i i D Leg I I I I I I I I I I I L l l D L l l D L l D Power Cap Value Pc Correction time limit Shutdown System Exception Action Aggressive Mode The range is from AAA to Maximum Configuration of During Operation Watt 1 2 8 Set the maximum time to take corrective actions in order to bring the system power consumption back to the specified Power Threshold Pa before generating System Event Log sending al
24. Access Limitation Access Limitation Type fe Allow Al Allowed Address C Denied Address IP Address Required Wee commas to separate IF address The wildcard 1 can be used in Denied address Default Value LAN Connection Type Set and display the connection type of managed server Auto Negotiation Auto Negotiation Connecting by suitable setting 100Mbps Full Connecting by Full Duplex at speed of 100 Mbps 100Mbps Half Connecting by Half Duplex at speed of 100 Mbps 10Mbps Full Connecting by Full Duplex at speed of 10 Mbps 10Mbps Half aaa Connecting by Half Duplex at speed of 10 Mbps aaa BMC MAC MAC Address is displayed Address AAA A DHCP Determine whether to dynamically obtain an IP address from a Blade Server DHCP server If the item is set Enable and applied BMC set the Enable value obtained from DHCP server on IP Address Subnet Other server Mask and Default Gateway esses aeaa Disable IPAddress Set the BMC IP address of the managed server 3_ 192168 1 1 Subnet Mask Set the Subnet Mask of the managed server 2 3 299 259 255 0 X Default Gateway Set the Default Gateway IP address of the managed server 3 0 0 0 0 If you set this item it is necessary for applying configuration Determine whether to enable disable of Dynamic DNS 4 DNS Server Set the DNS Server 0 0 0 0 55 BMC Configuration User s Guide
25. C Firmware Boot Firmware Sensor Data Information SDR and System BIOS can be collected BMC Configuration User s Guide 1 1 2 NEC Express5800 ft Server B BMC Configuration You can specify the configurations to the managed server s BMC B Backup You can output the settings of FRU BIOS BMC Configuration on the server to a file B Restore You can apply the FRU BIOS BMC settings which are backed up in files to BMC on the server 1 1 3 NEC Express5800 HR120a 1 The highly parallel computing server B Setting for NEC ESMPRO Management You can specify the authentication key to manage from NEC ESMPRO Manager to the managed server s BMC BMC Configuration User s Guide 2 System Requirements 2 1 Hardware It needs to satisfy the following conditions o Target System NEC Express5800 Series and NEC Storage NS Series that integrates EXPRESSSCOPE Engine 3 NEC Express5800 HR120a 1 The highly parallel computing server Oo Memory 512MB or more Availability of hard disk 100MB or more CHECK e D Server NEC Express5800 R320c M4 R320c E4 and R310c E4 is supported by the upper version from BMC Configuration for Windows Ver 1 20 e ECO CENTER NEC Express5800 E120d 1 E120d M and E110d M is supported by the upper version from BMC Configuration for Windows Ver 1 21 e The highly parallel computing server NEC Express5800 HR 120a 1 is supported by the upper version from BMC Configuration for Linux Ver 1 31 2 2 Operating
26. Configuration User s Guide uergen Mail Alert setting EE Alert Select Enable Disable of Ee A Disable Response time of 30 Server SMTP server succeed by E mail transmission Mail Mail Header setting To 1 Select Enable Disable of To 1 1 Enable Mail Address ____________ Set the mail address of To 1 E 3 Blank Select Enable Disable of To 2 1 Disable Mail Address 7 p p 7 Set the mail address of To 2 2 3_ Blank To 3 Select Enable Disable of To 3 1 Disable Mail Address Lei the mail address of To 3 2 3 Blank cllc From LSettheFrom 3 Bank Reply To L eibeienkio i 1 Blank Subject Setthe Subject 4 1 1 l Blank o SMTP Server SMIPServerseting _ 1 SMTP Server Set the SMTP Server 5 EE AA SMIPPot Set the SMTP Port A SMTP Authentication _____ Select Enable Disable of SMTP Authentication Disable lt CRAM MD5 J 4 Select Enable Disable of CRAM MD5 6 7 Enable LOGIN Select Enable Disable of LOGIN 6 7 Enable LPLAIN suus Select Enable Disable of PLAIN 6 7 Enable o User Name Setthe SMTP UserName 6 8 1 Blank Password Set the SMTP User Password 6 9 Blank Alert Level AlertLevelseting 2 Alert Level Set the kind of event to alert 10 Error Warning mE Alert Test Exe
27. Express 5800 NEC BMC Configuration User s Guide Chapter 1 Chapter 2 Chapter 3 Chapter 4 Chapter 5 Chapter 6 Chapter 7 Summary System Requirements Installation Functions Functions for ft Server Functions for the highly parallel computing server Precautions for Use Rev 1 32 NEC Corporation 2013 BMC Configuration User s Guide Contents qnid dm l COMES A As 2 peu su tao 4 External Libraries Much Eeer 5 EE DOCUMEN AAA PP E AA EAEE AAE AA AAE EA 6 1 GEHT T LEL BMC Contipuration Ett 7 LE Wa NBC Expresso EE 7 1 1 2 NEC EXpreSs3800 fU E 8 1 1 3 NEC Express5800 HR120a 1 The highly parallel computing server ueessees 8 2 System RCQUMPCINGIIUS ooo oes e 9 P EE 9 2 2 Operna E 9 2 3 Sever Management DIVER EE 10 3 A TE EAE T TET AO E TTE E T 11 3 1 BMC Configuration Installation for Windows cccccccccessscccesssecceesseeceesseeceessseeceesseeecesseeeessseeeens 11 S L Check before mstal Te E 11 Si Ri O EE 11 S L Install BMC e UA din ee 12 3 2 BMC Configuration Uninstallation for Windows 14 3 2 1 Check before Wms all AtiOn rica epa 14 3 2 2 Uninstall BMC CA aida 14 3 3 BMC Configuration Installation for Linux ooocnnnncccnononncononannnononanonnnnnncnnnnnnnonnnnnnonnnnnanconnnncnnnnancnnns 15 CA dos ose Reina eR NEN ne Rio 15 3 3 2 Copy and extract BMC Configuration installer sees en
28. IRG 3 E 3 sl Console Redirection Configuration Current value Value of after rebooting BIOS Redirection Port Serial Port E Serial Part B sl Terminal Type VT 100 vr 00 M Baud Rate 1 15200 115200 Data Bits 8 E j Stop Bits 11 fi Parity N one None Flow Control Hardware ATSCTS Hardware ATSCTS Continue C A after POST Enable Enable Disable Default Value 43 BMC Configuration User s Guide Basic Configuration POST Error Pause Serial Port A Serial A Base I O Serial Port B Serial B Base UO Serial B Interrupt Baud Rate Data Bits Flow Control Continue C R after POST Basic Configuration setting Select Enable Disable of POST Error Pause Select Enable Disable of Serial Port A Select Base I O Address of Serial Port A It must be different from Serial Port B Select IRQ of Serial Port A It must be different from Serial Port B Select Enable Disable of Serial Port B Select Base I O Address of Serial Port B It must be different from Serial Port A Select IRQ of Serial Port B It must be different from Serial Port A Select BIOS Redirection Port You can not select Disable Port Select Baud Rate Select Data Bits Select Flow Control Select Enable Disable of Continue Console Redirection after POST The value might be different according to the system 2 It is not displayed when the system does not s
29. P Mal Alert Modutumg the setting in this screen will turn the connection with the BMC alf Management LAN Management LAN Management LAN BMC MAC Address 160 F0 49 56 94 53 Connection Type Auto Negotiation DHCP Enable Dizable IP Address Required 192181477 Subnet Mask Required 255 255 2540 Default Gateway oon Dynamic OMS Enable Dizable ONS Server Host Name FO Domain Mame Default Value 20 BMC Configuration User s Guide BMC Configuration SAMP Alert System Operation ECO Control Miscellaneous Network Service User Account Active Directory LDAP Mal Alert BL MAL aggrgezz ues LL rtl ll lt sl 3 DHCP Enable Disable P amp ddress Required 1921681477 Subnet Mask Required 552552540 Default Gateway oon Dinamic DNS Enable Disable DNS Server fF Host Name 0 Domain Mame Access Limitation Access Limitation Type Ge Allow Al Allowed Address Denied Address IP Address Required Use commas to separate P address The wildcard M can be used in Denied address Default Value Management Set and display LAN port to communicate with BMC You can Management LAN LAN modify this setting only on BMC Configuration of Off line TOOL 4 o LAN port for BMC exclusive use Management LAN Shared BMC LAN Connection Type Set and display the connection type of managed server Wh
30. POST Memor Resize Madule Board Missing SMI Timeout YolkagelMontoning Abnormal State AA Cooling Device Monitoring amp bnormal Transition to Power Save xl e rper obest Ve ces AA t p p e Microcontroller State Default Value 32 BMC Configuration User s Guide SNMP Alert SNMP Alert setting Alert Select Enable Disable of SNMP Alert Ge Computer Name _ Set the Computer Name 2 Community Name 17 EN Alert Process Select One Alert Receiver All Alert Receiver of Alert Process Alert Acknowledge Alert Retry Count Alert Timeout Alert Receiver MENTEM Primary IP Address Select EE of Primary IP A Address A Enable IP Address _________________ Set the IP Address of Primary 5 0000 Secondary IP Address Select Enable Disable of Secondary IP Address 4 Disable IP Address Set the IP Address of Secondary 5 Tertiary IP Address Select Enable Disable of Tertiary IP Address A Disable IP Address Set the IP Address of Tertiary 5 0 0 0 0 Alert Level _ Alert Level setting Alert Level Set the kind of event to alert 6 Error Warning Alert Test Execute the alert test by SNMP 1 When PEF Platform Event Filter setting is Disable it can not alert 2 It is possible to set less than 16 half size alphanumeric characters 3 It is possible to set when Alert Acknowledge is Enable 4 When SNMP
31. System Target OS is as follows o Windows Microsoft Windows Server 2003 R2 Standard Edition Enterprise Edition Microsoft Windows Server 2003 R2 Standard Enterprise x64 Edition Windows Server 2008 Standard Enterprise Windows Server 2008 Standard Enterprise Datacenter x64 Edition Windows Server 2008 R2 Standard Enterprise Datacenter Windows Server 2012 Standard Datacenter Oo Linux Red Hat Enterprise Linux Advanced Platform 5 x86 x64 Red Hat Enterprise Linux Server 5 x86 x64 Red Hat Enterprise Linux Server 6 x86 x64 SUSE Linux Enterprise Server 10 SP3 x86 x64 IMPORTANT e You can not install BMC Configuration in the following case Installation on guest OS virtual of machine e The following packages are necessary to use BMC Configuration on Red Hat Enterprise Linux Server 6 x64 If these are not installed you need to install them from the install disc of operating system glibc 1686 nss softokn freebl 1686 libxml2 1686 Zlib 1686 2 3 Server Management Driver On Linux OpenIPMI Driver must be started to use BMC Configuration CHECK e Use the following command to confirm that OpenIPMI Driver has been installed on Linux rpm qa grep 1 OpenIPMI e If the OpenIPMI Driver is stopped you need to start OpenIPMI Driver You can confirm the status of OpenIPMI Driver by the following command letc init d ipmi status If not loaded is displayed after executing the above command please start OpenIPMI
32. ack replacement is displayed 1 NONE A Need NoNeed Remaining Charge The remaining charge mAh of the battery pack is displayed 1 Remaining Charge LL The remaining capacity for the Full Charge Capacity Full Charge Capacity The full charge capacity mAh of the battery pack is displayed 1 Full Charge Capacity he battery capacity that could be discharged to the voltage 45 BMC Configuration User s Guide Rated Capacity The rated capacity mAh of the battery pack is displayed 1 Rated Capacity The minimum capacity of the battery pack based on the Voltage The measured voltage mV of the battery pack is displayed 1 Current The measured current mA of the battery pack is displayed 1 Manufacturer Name The manufacturer name of the battery pack is displayed 1 Model Name The model name of the battery pack is displayed 1 _ Battery Type _______________ The type of the battery pack is displayed 1 Total Working Hours The total working hours of the battery pack is displayed 1 Recharged Count The recharged count of the battery pack is displayed 1 Full Charged Count NN The full charged count of the battery pack is displayed 1 If the battery pack is not mounted is displayed 46 BMC Configuration User s Guide 4 4 2 Battery Controller Information This screen displays the various information of the battery controller Battery Con
33. and Enter key When the uninstallation is completed the following message is displayed The uninstallation of BMC Configuration is now completed BMC Configuration User s Guide 4 Functions This chapter describes the functions of BMC Configuration of if you use a standard server Please refer to chapter 5 when you use ft Server Please refer to chapter 6 when you use the highly parallel computing server NEC Express5800 HR120a 1 4 1 Start procedure 4 1 1 On Windows After the installation is completed do the following operation as Administrator to open the main dialog box of BMC Configuration Click BMC_Configuration BMC Configuration from start on Windows The following screen shows example r BMC Configuration Version 1 30 BIOS Configuration Battery Configuration Backup Restore BIC Battery Configuration Irotiahzation Close System Information BMC Firmware Version 00 05 Boot Firrarare Version 00 29 SDF Version 00 09 BIOS Version 4 6 1003 CHECK e Battery Configuration is displayed when the managed server is equipped with a battery e Battery Configuration is supported the following version BMC Configuration for Windows Ver 1 30 or later e Refer to the following to see BMC Configuration help information Click BMC Configuration BMC Configuration Help from start on Windows 18 BMC Configuration User s Guide 4 1 2 On Linux After the installation
34. ater it must be set to Enable If it sets to Enable Authentication Key also must be set 6 It is possible to set when NEC ESMPRO Management is set Enable 7 t is Authentication key when managing from NEC ESMPRO Manager Ver 5 4 or later It is possible to set less than 16 half size alphanumeric characters 42 BMC Configuration User s Guide 4 3 BIOS Configuration This screen displays and sets System BIOS settings of the server Please refer to the User s Guide of the managed server for details of the item This setting is applied at the next booting time of the managed server BIOS Configuration BIOS Basic Configuration Current value Value of after rebooting POST Error Pause Enable Enable Memory Boo C Hat Ge Boot CLI Setup Disable f Enable Disable Standby Power Save Disable C Enable Disable Serial Part amp Configuration Current value Value of after rebooting Serial Port A Enable Enable Disable Seral Base lO 3F8h EZ Serial 4 Interrupt IRQ 4 mo A Serial Part B Configuration Current value Value af after rebooting Serial Port B Enable Enable Disable Serial B Base ld 2F8h 2Feh Serial B Interrupt IRG 3 IRG 3 wl Default Value BIOS Configuration EX BIDS Current value Value of after rebooting al Serial Fort B Enable Enable Disable Serial B Base 1 0 2F 8h 2F amp h sl Serial B Interrupt
35. can not be set to Enable When HTTP is set to Enable HTTPS is also set to Enable automatically 7 3 Redirection setting If Redirection of Management Software setting in Miscellaneous is applied to Enable the Value of after rebooting of BIOS Redirection Port in BIOS Console Redirection Configuration is set to Serial Port B 7 4 PEF setting and SNMP Alert setting If Platform Event Filter in Miscellaneous is applied to Disable SNMP Alert is set to Disable And if SNMP Alert is applied to Enable Platform Event Filter is set to Enable 7 5 Alert form BMC n the case that the item Alert on BMC Configuration is enabled BMC will alert directly to the specified alert receiver when the event specified in Alert Level is occurred If NEC ESMPRO Manager Ver 5 4 or later or NEC ESMPRO Manager Association Module is installed on the alert receiver the SNMP alert from BMC is registered on NEC ESMPRO AlertManager Sending the alert from BMC depends on exist of NEC ESMPRO Agent 1 In the case of NEC ESMPRO Agent has been installed on the managed server If OS does not run on the managed server BMC send the alert when the specified event happens After OS runs and NEC ESMPRO Agent starts BMC does not send the alert even if the event happens because NEC ESMPRO Agent sends the alert 2 In the case of NEC ESMPRO Agent has not been installed on the managed server BMC sends the alert whenever the specified event happen
36. click Change Remove button You can uninstall it by displayed direction CHECK Close the dialog box of BMC Configuration if it has been opened and then uninstall BMC Configuration 14 BMC Configuration User s Guide 3 3 BMC Configuration Installation for Linux Explain the installation of BMC Configuration 3 3 1 Check before installation Check the followings See chapter 2 to check the system requirement Login to Linux as root user e BMC Configuration installer exists on following directory If you install by using downloaded modules bmc_config If you install by using EXPRESSBUILDER revision folder gt Inx pp bmc_config As for lt revision folder gt confirm the number in the parenthesis of the version displayed on the lower right of Autorun Menu For example if the version is Version 6 10 020 05 024 then lt revision folder gt is 024 3 3 2 Copy and extract BMC Configuration installer Copy the BMC Configuration installer all files in bmc_config into any directory on the managed server The following is an example to copy into usr local bin 1 Copy the all installer files to usr local bin It is shown example that files is copied from EXPRESSBUILDER to use local bin directory The mount path is dependent on the OS Specify the right path Com ee EE Al oo mes EE ena Moe A 2 Move to the directory containing the installer Cole sio oca ul barn ome me omer ie 3 Extract the install
37. cute the alert test by E mail 1 When Mail Alert is enabled one or more of the addresses should be enabled 2 It is possible to set when To X is Enable 3 It is possible to set less than 255 half size alphanumeric characters and minus sign period at mark 4 It is possible to set less than 63 half size alphanumeric characters except for UM lt 3 gt and Y a It is posible to set full domain or IP Address less than 255 half size alphanumeric characters and minus sign underscore period 6 It is possible to set when SMTP Authentication is Enable 7 When SMTP Authentication is enabled one or more of the authentic method should be enabled II _ underscore wow gt quotation marks II II 8 It is possible to set less than 64 half size alphanumeric characters except for space quotation marks 9 E TET Ss T GG and YU Q t is possible to set es than 19 half size alphanumeric characters except for space quotation marks i dn E C i M GG and YU 10 The Alert Level is as follows Alert Level When Error is detected in each sensor type the alert is sent to the checked address When Error or Warning is detected in each sensor type the alert is sent to the checked address When Error Warning or Information is detected in each sensor type the alert is sent to the checked address You can arbitrarily
38. e alert is sent to the checked address You can arbitrarily select the event and the address To X to alert in each sensor type 65 BMC Configuration User s Guide 5 2 9 SNMP Alert This screen displays and sets the alert by SNMP from BMC BMC Configuration Network Service Network Service Uzer Account Active Directory LDAP Mail Alert SNMF Alert System Operation Control Miscellaneous ah SNMP Alert Alert Enable Ge Disable Computer Mame Community Name public Alert Process Dne Alert Receiver Ze All Alert Receivers Alert Acknowledge Enable Disable Alert Heim Count D imes 1 7 Alert Timeout 3 seconde 3 30 Alert Receiver v Primar IP Address Required 0 0 0 0 IY Secondary IP Address Required 0 0 0 0 IM Tertiam IP Address Required 0 0 0 0 Alert Level Alert Level Erow arming m Default Value Alert Test BMC Configuration Network Servicel Network Service User Account Active Directory LDAP Mail Alert SNMP Alert System Operatio Control Miscellaneous ah Alert Receiver v Primary IP Address Required 0 0 0 0 Jh Secondam IP Address Required 0 0 0 0 e Tertiary IP Address Required 0 0 0 0 Alert Level Alert Level Erow aming Error Warning Information Temperature Manitaring Threshold he E Voltage Monitoring Threshold pe E FAM Speed pe in Processor pe E Fow
39. e 15 3 3 Install BMC ee EE TE EE 16 3 4 BMC Configuration Uninstallation for Lanz 17 3 4 T Check before installation tia 17 324 2 Uninstall BMC Contieurati ON WE 17 4 O LM M E 18 a p Start Tee 18 a TL Ree 18 E A 19 A CO A A NM E E 19 4 2 BMC Conti Urol ee dicti 20 ELN E a N 20 A 23 a 2 3 EE 24 A PEERS 25 4 2 5 EE A A aS ceo MM LEO SUIS 26 A 2 EE RET A Rea aaNet aoe ete 28 2 27 EDAP ig tice A SM ME 29 4 2 0 MAL AIGTE coser O eM EM 30 AZO Nod SCIT ER 32 4 2 10 NO o o A e e A 34 AZET A a ee AME EM 36 4 2 12 ECO Tn orina ad 38 4 2 13 ee 40 4 2 T4 Miscellate CT 41 4 3 BIOS EE EEN 43 AM Battery CON US EODSci eia eee o d ipod e ll eue thi eI eed 45 4 4 Ll Battery Pack InforitatlOb a o c ee ee dn conma usen 45 4 4 2 Battery Controller Information EE 47 BMC Configuration User s Guide 4 4 3 battery Controller Config ration 9 9 3 it 48 2 MEI Te 0 E M 40 PP A EE 50 Ze Clear BNOSBLI desde ee 51 4 8 BMC Configuration Ionalzanon nsnsi A 51 4 9 EE 51 5 Foncions TOC RS E 52 SAL D CE e 52 AA A 52 5 1 2 OO TD ed 53 5 2 BMC ConlPsuratlon Seu E 54 S2 O EUM M MM E 54 A OO aa E N N 57 5 2 9 BEE 58 e E EE 59 A ER I EN e PE 60 5 240 GOUD a a MM M LM M ee 62 Bua EE 63 NP TTE 64 D 2 9 TEE 66 AN An A 68 S 2 A A uS Ee EDU RE 70 A T S TEE 71 5 3 EE 73 E DE EE 74 9 9 BMC Initial za E EE 75 AAPP E a TEE 75 6 Functions for the highly parallel computing server 76 61 SPO er 76 6 EN
40. e to set Random when the system supports it 3 Enable and Disable of the report function from BMC are set It makes SNMP Alert be impossible when it sets to Disable 4 When BMC can be managed directly from NEC ESMPRO Manager Ver 5 61 or later it must be set to Enable If it sets to Enable Authentication Key also must be set 5 It is possible to set when NEC ESMPRO Management is set Enable 6 It is Authentication key when managing from NEC ESMPRO Manager Ver 5 61 or later It is possible to set less than 16 half size alphanumeric characters 12 BMC Configuration User s Guide 5 3 Backup Back up the system information to files Select the back up target and click OK File Locations Folder CAProgram Files 26 1BMIC Configuration Browse Backup Target W FRU Information e BIOS Information W BMC Information Hem m Description File Locations Set the location of backup files The preservation folder of the file is displayed It changes the preservation folder Folder__ g Browse mort re lr e e e zm D I e ee eae a a ERU Information Select whether backup FRU Information or not BIOS Information Select whether backup BIOS Information or not BMC Information Select whether backup BMC Information or not 73 BMC Configuration User s Guide 5 4 Restore Restore the system information from files Select the restore target and click OK
41. eed Error W arnina Default Value 64 BMC Configuration User s Guide uergen Mail Alert setting EE Alert Select Enable Disable of Ee A Disable Response time of 30 Server SMTP server succeed by E mail transmission Mail Mail Header setting To 1 Select Enable Disable of To 1 1 Enable Mail Address ____________ Set the mail address of To 1 E 3 Blank Select Enable Disable of To 2 1 Disable Mail Address 7 p p 7 Set the mail address of To 2 2 3_ Blank To 3 Select Enable Disable of To 3 1 Disable Mail Address Lei the mail address of To 3 2 3 Blank cllc From LSettheFrom 3 Bank Reply To L eibeienkio i 1 Blank Subject Setthe Subject 4 1 1 l Blank o SMTP Server SMIPServerseting _ 1 SMTP Server Set the SMTP Server 5 EE AA SMIPPot Set the SMTP Port A SMTP Authentication _____ Select Enable Disable of SMTP Authentication Disable lt CRAM MD5 J 4 Select Enable Disable of CRAM MD5 6 7 Enable LOGIN Select Enable Disable of LOGIN 6 7 Enable LPLAIN suus Select Enable Disable of PLAIN 6 7 Enable o User Name Setthe SMTP UserName 6 8 1 Blank Password Set the SMTP User Password 6 9 Blank Alert Level AlertLevelseting 2 Alert Level Set the ki
42. emory connected by the remote media function It starts from the FD drive or the removable mass storage connected to the managed server 40 BMC Configuration User s Guide 4 2 14 Miscellaneous This screen displays and sets the various functions of BMC BMC Configuration Network Service User amp ccount Active Directory LDAP Mal Alert SNMP Alert System Operation ECH Control Miscellaneous SEL Behavior when SEL EE H Stoplogging SEL Clear al SEL Overwrite oldest SEL Power Restore Delay AC LIME C Stau Or fe Last State Power Dn Delay Time Required Random 45 seconds 45 600 PEF Platfrom E vent Filter Ge Enable Disable IF PEF Configuration is set to disable SNMP alert will not work Management Software ESMPRO Management C Enable Ge Disable Authentication Key Required Redirection f Enable Disable Default Value Description Default Value SEL setting Behavior when SEL Select the Behavior when SEL repository is full 1 Stop logging SEL repository is full Stop logging SEL SEL is not recorded any more Clear all SEL Delete all SEL and record SEL newly Overwrite oldest SEL Old SEL is overwritten with new SEL Power Restore Delay Power Restore Delay setting AC Link Select the AC Link setting Last State 2 0 Stay Off DC is not turned on Last State It becomes the same as time when AC was turned off
43. en Auto Negotiation Management LAN is Shared BMC LAN you can modify this setting only on BMC Configuration of Off line TOOL 1 Auto Negotiation Connecting by suitable setting 100Mbps Full Connecting by Full Duplex at speed of 100 Mbps 100Mbps Half Connecting by Half Duplex at speed of 100 Mbps 10Mbps Full Connecting by Full Duplex at speed of 10 Mbps 10Mbps Half e Connecting by Half Duplex at speed of 10 Mbps BMC MAC MAC Address is displayed Address Y EE DHCP Determine whether to dynamically obtain an IP address from a Blade Server DHCP server If the item is set Enable and applied BMC set the Enable value obtained from DHCP server on IP Address Subnet Other server MERI Mask and Default Gateway Disable X IPAddress Set the BMC IP address of the managed server 4 192 168 1 1 21 BMC Configuration User s Guide Subnet Mask Set the Subnet Mask of the managed server 3 4 255 255 255 0 Default Gateway Set the Default Gateway IP address of the managed server 4 0 0 0 0 If you set this item it is necessary for applying configuration information that the gateway is connected on network Dynamic DNS Determine whether to enable disable of Dynamic DNS 5 Disabe DNS Server _______Setthe DNS Server MINES 0 0 00 Hoei Name SettheHost Name 767 Blank Domain Name Set the Domain Name 7 Blan
44. eonaert json System Operation CAProgram FilesiBMC _Configurationijsonioperation jso Miscellaneous CProgram FilesiBMC_Configurationisonibasic eon Battery CAProgram FilestBIMC Configurationljsontbattery json File Locations Set the locations of files c Folder __________ The preservation folder of the file is displayed Browse It changes the preservation folder Restore Target 5 Select the restore target ss EE User Account Select whether restore User Account settings or not Only when the target backup file exists the file name is displayed and able to be selected Network Select whether restore Network settings or not Only when the target MEER backup file exists the file name is displayed and able to be selected Alert Select whether restore Alert settings or not Only when the target backup j TEN file exists the file name is displayed and able to be selected Operation Select whether restore Operation settings or not Only when the target 1 backup file exists the file name is displayed and able to be selected ECO 1 Select whether restore ECO settings or not Only when the target backup i file exists the file name is displayed and able to be selected 7 Miscellaneous Select whether restore Miscellaneous settings or not Only when the target l aan backup file exists the file name is displayed and able to be selected Batter
45. er EE EE N NN in the example file name means the version 15 BMC Configuration User s Guide 3 3 3 Install BMC Configuration 1 Move to the directory that the installer was extracted Cow Sie Moc ale bak dome me Ouse db AMOS EE N NN in the example directory name means the version 2 Execute the shell for the installation EE EEN N NN in the example file name means the version 3 A confirmation message of BMC Configuration installation is displayed Input yes and Enter key BMC Configuration is installed under opt nec BMC_Configuration directory If you input no the installation is not executed When the installation is completed the following message is displayed The installation of BMC Configuration 1s now completed After the installation is completed BMC Configuration is available BMC Configuration User s Guide 3 4 BMC Configuration Uninstallation for Linux Explain the uninstallation of BMC Configuration 3 4 1 Check before installation Check the following Login to Linux as root user 3 4 2 Uninstall BMC Configuration 1 Move to the directory in which all installation files are copied COL tet loca E EE EE N NN in the example directory name means the version 2 Execute the shell for uninstallation SABMO C Omm acd on e E N NN in the example file name means the version 3 A confirmation message of BMC Configuration uninstallation is displayed Input delete
46. er Supply pe im Power Unit State m Memory 4 mi FUST Ri Fr Event Lagging rn System Event 5 Critical Interrupt Im Default Value 66 BMC Configuration User s Guide SNMP Alert SNMP Alert setting Alert Select Enable Disable of SNMP Alert Ge Computer Name _ Set the Computer Name 2 Community Name 17 EN Alert Process Select One Alert Receiver All Alert Receiver of Alert Process Alert Acknowledge Alert Retry Count Alert Timeout Alert Receiver MENTEM Primary IP Address Select EE of Primary IP A Address A Enable IP Address _________________ Set the IP Address of Primary 5 0000 Secondary IP Address Select Enable Disable of Secondary IP Address 4 Disable IP Address Set the IP Address of Secondary 5 Tertiary IP Address Select Enable Disable of Tertiary IP Address A Disable IP Address Set the IP Address of Tertiary 5 0 0 0 0 Alert Level _ Alert Level setting Alert Level Set the kind of event to alert 6 Error Warning Alert Test Execute the alert test by SNMP 1 When PEF Platform Event Filter setting is Disable it can not alert 2 It is possible to set less than 16 half size alphanumeric characters 3 It is possible to set when Alert Acknowledge is Enable 4 When SNMP Alert is enabled one or more of the addresses should be enable 5 It is possible to set when each Aler
47. ert and Shutdown Select Enable Disable of the action if the power consumption has been exceeded over the Power Threshold Pa during the period specified in the Correction time limit 1 36 Configuration of During Operation 8 2 or Minimum value whichever greater 8 IS Disable BMC Configuration User s Guide Non Aggressive Mode Non Aggressive Mode brings the system power Non Critical Power Cap consumption under the specified upper limit threshold without extremely decreasing system performance This function reduces power consumption by changing only CPU clock in order to reduce the deterioration of the system performance compared with Aggressive Mode If the power consumption has been exceeded over the Power Threshold Pn during the period specified in the Correction time limit it will be able to Select Enable Disable of Non Aggressive Mode Disable Power Threshold Pn Set the Power consumption upper limit threshold of Power Power Cap Value Pn Non Aggressive Mode The range is from Minimum Threshold Pa Configuration of Idle to BBB Watt 4 5 8 10 or Minimum Configuration of Idle 10 whichever is NENNEN E E Correction time limit Set the maximum time to take corrective actions in 10 or Minimum order to bring the system power consumption back to value the specified Power Threshold Pn before generating whichever is System Event Log and sending alert The range is
48. escription User Account _Displays a list of registered users 2 No The number allocated to user is displayed _ User Name Theusernameisdisplyed Privilege The privilege of the user is displayed 1 It is possible to delete only for the existing user 58 BMC Configuration User s Guide 5 2 4 User This screen sets the selected user User No 1 Enbe Disable User Marne Required Administrator Password Required E Confirm Password Required dreck Privilege Admaristrator m Default Cancel Select Enable Disable of User 1 Enable User Name Set the User Name 2 Blank Password Set the Password of the User 3 Blank Confirm Password Blank Privilege Select the privilege of the User 4 Administrator Administrator Operator User 1 Itis possible to set only for the existing user 2 It is possible to set less than 15 half size alphanumeric characters minus sign and _ underscore minus sign can not use top character of User Name eng root null MWA AccessByEM Poem and already registered name in other number can not use 3 It is possible to set less than 19 ASCII characters except for space quotation marks amp and Y 4 The privilege is as follows I S m rT mm Ea M A E em y Frivilege F Description Administrator Users who have an administrative account and are allowed
49. figuration information items Refer to set more detailed settings Explain the settings with the screen of BMC Configuration for Windows Network and Service are different settings for CPU IO moduleO and CPU IO modulel Otherwise they are common settings for CPU IO moduleO and CPU IO modulel 5 2 1 Network This screen displays and sets the network environment of BMC BMC Configuration Mal Alert SAMP Alert System Operation Control Miscellaneous Network Servicel Network Service User Account Active Director LDAP Modufumg the setting in this screen will turm the connection with the DM oft Management LAN Management LAN M anagement LAN Connection Type Auto Negotiation gt BMC MAC Address 50 E5 49 25 05 81 DHCP Enable Disable PAddtess Required 1921681422 Subnet Mask Required 255 255 2540 Default Gateway ooo Dynamic DNS C Enable Disable DAS Server FP Host Name FO Domain Mame Default Value 54 BMC Configuration User s Guide BMC Configuration Mal Alert SAMP Alert System Operation Control Miscellaneous Network Servicel Network Service User Account Active Director LDAP m MAL agadgmezs e ed aut a DHCP Enable Disable IP Address Required i521681422 Subnet Mask Required 255 255 2540 Default Gateway ooo Dynamic DNS C Enable Disable DAS Server fo Host Name FO Domain Name NEN
50. get Selectthebackuptarget User Account Select whether backup User Account settings or not and display the backup file name Lakes ee oe eee ee ee ia eke Network Select whether backup Network settings or not and display the backup file name Alert Select whether backup Alert settings or not and display the backup file i name nelli bad Operation Select whether backup Operation settings or not and display the backup file name M dB P rm rm rm rm H e rm ml ECO 1 Select whether backup ECO settings or not and display the backup file _name Miscellaneous Select whether backup Miscellaneous settings or not and display the i backup file name r o A e e e e ee ee e Battery oi Select whether backup Battery settings or not and display the backup file name 1 Itis not displayed when the system does not support this function 49 BMC Configuration User s Guide 4 6 Restore Restore the configurations from files Select the restore target and click OK File Locations Folder C Program FilesiBMIC Configurationyson Browse Restore Target User IvIanagement CAPrograrn FilestBIMC Configurationljson useraccount j Network CAProgram Files BMIC_Configurationljsoninetwork json Aer GiProgan FissiBMC_Configuatinlj
51. greater 8 from 1 to 600 Sec 4 8 Safe Power Capping Safe Power Capping brings the system power consumption down forcibly when the system is unable to obtain the power readings This function is considered for the case where the sharp increase of power consumption causes circuit breaker tripping Safe Power Capping Disable Power Reading Timeout Boot Time Configuration 6 Boot Time Configuration can set the performance of the system in booting Also can set disable CPU cores Disable Performance Mode Select the performance of the system in booting 7 Performance Performance Optimized Optimized Disable CPU Cores Set the CPU Core number s to disable 7 8 i poU bett ial NN managed server are displayed Itis possible to set when Aggressive Mode is Enable 2 AAA is Minimum Configuration of Idle or Power Threshold Pn 3 When Power Threshold Pa is not equal to Power Threshold Pn NNN is I When Power Threshold Pa is equal to Power Threshold Pn NNN is Correction time limit of Non Aggressive Mode 4 t is possible to set when Non Aggressive Mode is Enable 5 BBB is Maximum Configuration of During Operation or Power Threshold Pa 6 It is not displayed when the system does not support this function 7 t is possible to set when Boot Time Configuration is Enable 8 The range and value is different according to the system IMPORTANT e The ECO screen is not displayed if the managed server d
52. install BMC Configuration on pour computer To continue click Hest Cancel 2 Enter a folder name to install Click Next BMC Configuration 1 00 Choose Destination Location Select folder where setup will install files Setup will install BMC Configuration in the following Folder To install to this folder click Next To install to a different folder click Browse and select another folder Destination Folder C Program Files 86 Browse InstallShield Cancel 12 3 Confirm the installation settings and click Next The installation is started BMC Configuration 1 00 Start Copying Files Review settings before copying files Setup has enough information to start copying the program files IF you want to review or change any settings click Back If you are satisfied with the settings click Nest ta begin copying files Current Settings Install tac Program Files 86 S Cancel InstallShield After the installation is completed BMC Configuration is available 13 BMC Configuration User s Guide 3 2 BMC Configuration Uninstallation for Windows Explain the uninstallation of BMC Configuration 3 2 1 Check before uninstallation Check the following Login to Windows as Administrator 3 2 2 Uninstall BMC Configuration Uninstall from the Windows menu Control Panel Add or Remove Programs Select BMC Configuration and
53. is completed do the following operation as root user to open the setting function of BMC Configuration Op mes dS IO roa IE TO DUE ee TOn ome comia e Refer to the following to see BMC Configuration help information Open the setting of BMC Configuration and press F12 key on the screen displayed F12 help at the bottom 4 1 3 On Off line TOOL You can start the Off line TOOL as follows 1 The following message is displayed on the bottom of POST screen Press lt p gt on DUP ah o gt elie eich esi meno Ed ROMA ala ys NS wo 2 Press F4 key on this screen If F4 key is entered Keyboard type selection screen is displayed after POST screen and the Off line TOOL menu is displayed after selecting keyboard type 3 Select BMC Configuration Off line TOOL is integrated in the managed server by default e Refer to the following to see help information Start the tool and select Help menu or press Home key or key on the screen displayed Help Home or at the bottom BMC Configuration User s Guide 4 2 BMC Configuration This chapter explains all the BMC Configuration information items Refer to set more detailed settings Explain the settings with the screen of BMC Configuration for Windows 4 2 1 Network This screen displays and sets the network environment of BMC BMC Configuration SAMP Alert System Operation ECO Control Miscellaneous Network Service User Account Active Directory LDA
54. k Access Limitation Access Limitation setting Access Select the Access Limitation Type Allow All Limitation Type Allow All Access to BMC is not limited Allow Address Set the IP Address that is allowed to access BMC Deny Address iSetthe IP Address that is limited to access BMC IP Address MEM Set the IP Address to allow or deny to access with BMC 8 9 Itis possible to set when the system supports change 2 If you modify this setting Reset BMC is necessary on some systems When set to Shared BMC LAN the management LAN port is disabled When set to Shared BMC LAN the network performance may be reduced because the data of both LANs must be transmitted or received 3 When the Subnet Mask is wrong setting error message such as Failed to apply configuration is displayed 4 t is possible to set when DHCP is Disable 5 It is possible to set when DHCP is Enable 6 The length of Host Name must be less than 64 characters Host Name will be truncated to 63 characters if you input over 63 characters 7 Host Name and Domain Name should be within total of 255 characters 8 The range of IP address to Allow or Deny access is delimited by Comma With regard to the setting of Deny access Asterisk can be described as a wild card ex 192 168 1 192 168 2 1 192 168 2 254 9 t is possible to set when Access Limitation Type is Allowed Address or Denied Address The length
55. must be less than 255 characters 22 BMC Configuration User s Guide 4 2 2 Service This screen displays and sets the list of the service of BMC BMC Configuration SAMP Alert System Operation ECO Contral Miscellaneous Network service User Account Active Directory LD P Mail Alert Modutumg the setting in this screen wall turn the connection with the DM off Web Server HTTP Enable Disable HTTP Port Required feo 1 55535 HTTPS Enable Disable HTTPS Port Required 443 1 55535 HTTP cannot be set enabled singularly f Enable Disable SSH Port Required 22 1 65535 Default Value Description Web Server HTTP HTTP Port nl HTTPS Select Enable Disable of HTTPS Enable HTTPS Port Set the HTTPS Port 2 3 443 Select Enable Disable of HTTP 1 4 Set the HTTP Port 2 3 Select Enable Disable of SSH Enable SSH Port Set the SSH Port 2 3 22 If HTTP is set Enable HTTPS is also set Enable automatically You can not set HTTP alone to enable 2 It is possible to set when each port is set to enable 3 Each port number must not overlap 23 BMC Configuration User s Guide 4 2 3 User Account This screen displays and sets the users who use BMC It is possible to register up to 12 users or less BMC Configuration SAMP Alert System Operation ECO Control Miscellaneous Network Serice User Account Active Directory LDAP
56. n User s Guide 5 Functions for ft Server This chapter describes the functions of BMC Configuration of if you use ft Server Please refer to chapter 4 when you use a standard server 5 1 Start procedure 5 1 1 On Windows After the installation is completed do the following operation as Administrator to open the main dialog box of BMC Configuration Click BMC_Configuration BMC Configuration from start on Windows The following screen shows example gq BMC Configuration Version 1 20 Backup Eestore Backup Restore Close e Refer to the following to see BMC Configuration help information Click BMC Configuration BMC Configuration Help from start on Windows 52 BMC Configuration User s Guide You can start the Off line TOOL as follows 1 The following message is displayed on the bottom of POST screen EE EE o Ze NT pO defe 2 Press F4 key on this screen If F4 key is entered Keyboard type selection screen is displayed after POST screen and the Off line TOOL menu is displayed after selecting keyboard type 3 Select BMC Configuration Off line TOOL is integrated in the managed server by default e _ Refer to the following to see help information Start the tool and select Help menu or press Home key or key on the screen displayed Help Home or at the bottom 53 BMC Configuration User s Guide 5 2 BMC Configuration Setting This chapter explains all the BMC Con
57. nd of event to alert 10 Error Warning mE Alert Test Execute the alert test by E mail 1 When Mail Alert is enabled one or more of the addresses should be enabled 2 It is possible to set when To X is Enable 3 It is possible to set less than 255 half size alphanumeric characters and minus sign period at mark 4 It is possible to set less than 63 half size alphanumeric characters except for UM lt 3 gt and Y a It is posible to set full domain or IP Address less than 255 half size alphanumeric characters and minus sign underscore period 6 It is possible to set when SMTP Authentication is Enable 7 When SMTP Authentication is enabled one or more of the authentic method should be enabled II _ underscore wow gt quotation marks II II 8 It is possible to set less than 64 half size alphanumeric characters except for space quotation marks 9 E TET Ss T GG and YU Q t is possible to set es than 19 half size alphanumeric characters except for space quotation marks i dn E C i M GG and YU 10 The Alert Level is as follows Alert Level When Error is detected in each sensor type the alert is sent to the checked address When Error or Warning is detected in each sensor type the alert is sent to the checked address When Error Warning or Information is detected in each sensor type th
58. nded Kevboard Language English LI5 m Remote Media Encryption C Enable e Disable Port No Enceryptian Remote LD D vD Required E 20 1024 55532 Remote USB Memory 5 ae Mouse Coordinate Mode C Relative Absolute When server OS 12 Microsoft Windows Absolute Mode ts recommended When 05 is Linux Relative Mode is recommended Keyboard Language English L5 m Remote Media Encryption Enable Disable Port Mo Encryption Remote CD DvD Required 5 20 1024 65532 Remote USB Memory D dei Remote FD 5 23 Fart Encruptian Remote CD DVD Required 5 24 1024 55532 Remote USB Memory 5 zb Hemote FD 5i Er Default Value 68 BMC Configuration User s Guide Remote KVM Console Remote KVM Console setting Select Enable Disable of Encryption Enable Port No Encryption Set the Remote KVM Console Port when Encryption 7578 Port Encryption Set the Remote KVM Console Port when Encryption 7582 Mouse Cursor Mode Select the mode of the mouse cursor Dual Single E n A Mouse Coordinate Mode Select the mode of expression of coordinates of the Windows mouse cursor 2 Absolute Relative Linux Off line e ee DDeOuke SC Keyboard Language Select the Keyboard Language English US 3 Japanese JP English US French FR German DE Remote Media Remote Media setting ciclo Select Enable Disable of Encryption 1 Enable
59. oes not support this function 37 BMC Configuration User s Guide 4 2 12 ECO Information This screen displays the reference value and the statistics value of the managed server according to its HW configuration and system load The display format of Reference is different according to the system ECO Information EX Reference Waar Configuration 1 D mirum Configuration 2 During Operation 450 nw During Operation 100 47 Idle 60 rw Idle 30 pw Cl Madrim configuration means an available rnaximum configuration m the purchase 2 Mirra configuration means an available minimum configuration m the purchase These values are reference only Each value includes a possible tolerance and rught be different from the actual value which depends on your precise server configuration ECO Information ES Reference Micron Power Consumption 450 D Mirren Power Consumption 30 pa Warning These values are reference only Each value includes a possible tolerance 38 BMC Configuration User s Guide Jtem Description o SS O Maximum Configuration 1 An available maximum configuration in the model At system high load When only power supply ON At system high load Idle When only power supply ON Maximum Power Consumption 1 Maximum system power consumption Minimum Power Consumption 1 Maximum system power consumption Power Current Maximum Minimum Average Minimum Average Ma
60. oup This screen sets the selected group Group No 1 Group Group Name Required Privilege Select the privilege of the Group Administrator Operator User Blank Blank Administrator 1 Itis possible to set less than 255 half size alphanumeric characters minus sign and _ underscore 2 It is possible to set less than 255 half size alphanumeric characters minus sign period 28 _ underscore and BMC Configuration User s Guide 4 2 7 LDAP This screen displays and sets the LDAP Lightweight Directory Access Protocol BMC Configuration SAMP Alert System Operation ECO Control Miscellaneous Network Serice User Account Active Directory LDAP Mail Alert DAP LDAP Default Value LOAP Authentication Enable Disable IPAddress Required Pot Required E36 1 65535 Search Base Required Bind Domain Mame Required Bind Password Required n EI n d d o P setting a EEGEN LDAP Authentication Select Enable Disable of LDAP Authentication IP Address Port Search Base Bind Domain Name Blank Bind Password Set the IP Address 1 0 0 0 0 Set the LDAP Port 1 636 Blank Set the Password used by LDAP Authentication 1 3 Blank It is possible to set when LDAP Authentication is Enable 2 It is possible to set from 4 to 62 half size alphanumeric characters minus sign underscore
61. rior written permission of NEC Corporation 4 All efforts have been made to ensure the accuracy of all information in this document If you notice any part unclear incorrect or omitted in the document contact your authorized NEC sales representative 5 NEC assumes no liability for damages arising from the use of this product nor any liability for incidental or consequential damages arising from the use of this document regardless of 4 BMC Configuration User s Guide About this Document This document explains the complete procedures from installation of BMC Configuration to setup of managed server Before attempting to operate BMC Configuration read this document so as to gain an adequate understanding of the contents B Notes This document is intended for persons who are familiar with the operating system s functions and operations and the network s functions and setup For operations and inquiries about the operating system see its online help information This document covers universal information about generally managed servers The notes and restrictions on use of each product as a managed server are explained in the user s guide provided with the managed server and ESMPRO Manager Ver 5 Setup guide Names used with screen images in this document are fictitious They are unrelated to existing product names names of organizations or individual names The setting values on the screen images are shown as examples so
62. roup Administrator Operator User Blank Blank Administrator 1 Itis possible to set less than 255 half size alphanumeric characters minus sign and _ underscore 2 It is possible to set less than 255 half size alphanumeric characters minus sign period 62 _ underscore and BMC Configuration User s Guide 5 2 LDAP This screen displays and sets the LDAP Lightweight Directory Access Protocol BMC Configuration Mal Alert SAMP Alert System Operation Control Miscellaneous Network Servicel Network Service User Account Active Director LDAP LDAP LDAP Authentication Enable Disable IP Address Required TP Port Required E36 1 65535 Search Base Required P Bind Domain Name Required Po Bind Password Required 4 Default salue Description Qoo O ERES LDAP Authentication Select Enable Disable of LDAP Authentication Disable IP Address Por MARRON A RE SearchBase Set the Search Base used by LDAP Authentication 1 2 Blank Bind Domain Name_____ Set the Domain Name used by LDAP Authentication 11 2 Blank Bind Password Set the Password used by LDAP Authentication 1 3 Blank Setthe IP Address 1 0 0000 SethelDAPPot ss 636 It is possible to set when LDAP Authentication is Enable 2 It is possible to set from 4 to 62 half size alphanumeric characte
63. rs minus sign underscore period comma and 3 It is possible to set from 4 to 31 half size alphanumeric characters except for and Y wow quotation marks 63 BMC Configuration User s Guide 5 2 8 Mail Alert This screen displays and sets the alert by E mail from BMC BMC Configuration Network Serviced Network Service User Account Active Directory LDAP Mail Alert SNMF Alert System Operation Control Miscellaneous Mail Alert ET ert Tes Alert Enable Disable Response time of SMTP server Required 30 seconds 30 600 Mal M Te Required Toe Required To 3 Required From Reply To Subject SMTP Server SMTP Server 0 0 0 0 IP Address or Omain Name SMTP Port Required 25 1 55535 SMTP Authentication C Enable Ce Disable G ft F rnm F Bl ath Default salue BMC Configuration Network Servicel Network Service User Account Active Directory LDAP Mail Alert SNMP Alert System Operation Control Miscellaneous SMTP Port Required 25 1 65535 SMTP Authentication Enable Disable CRAWMDG E LOGIN F PLAIN UserName Required Password Required Alert Level Alert Level Erow aming m Toi Toe Tos T emperature h onitenng Threshold Error Warning fe e I Information r r h Voltage Monitoring Threshold Error Warning M z Information r mi mi FAN Sp
64. rver 2 1 Disable I Server 2 X Server Address Z Set the IP Address of Domain Controller Server 2 1 4 Blank Domain Controller Select Enable Disable of Domain Controller Server 3 1 Disable Server 3 8 Server Address 3 Set the IP Address of Domain Controller Server 3 1 4 Blank 60 BMC Configuration User s Guide Jtem Description o Group 1 ____________ _ Displays a list of registered groups 220 No Thenumberallocatedtogroupisdispayed Group Name _____ _ The group name is displayed L0 Group Domain The domain name of Active Directory isdisplayed Privilege The privilege of the group is displayed Edit 1 Add or change group information Delete 1 5 Delete group information It is possible to set when Active Directory Authentication is Enable 2 It is possible to set less than 255 half size alphanumeric characters minus sign underscore and period 3 When Active Directory Authentication is enabled one or more of the Domain Controller Server should be enable 4 t is possible to set when each Domain Controller Server is Enable 5 It is possible to set only for the existing group 61 BMC Configuration User s Guide 5 2 6 Group This screen sets the selected group Group No 1 Group Group Name Required Privilege Select the privilege of the G
65. s 7 6 Alert Test Please send a test alert after completing all the settings of the Alert Configuration You may be unable to use the alert function due to network environment and settings 78 BMC Configuration User s Guide 7 7 ECO setting The electric power value might not necessarily reach even the value of Power Threshold The electric power control lowers the power consumption of the system by lowering the frequency of CPU Memory When CPU Memory Throttling value reaches 100 the electric power value does not fall any more The server may not boot correctly if you configure too low value to the Aggressive Mode Power Threshold Pa and enable the Shutdown System option The following case ECO settings are not supported and not displayed Operating System is Windows Server 2003 R2 and NEC ESMPRO Agent is installed 7 8 Management LAN setting When set to Shared BMC LAN the management LAN port is disabled When set to Shared BMC LAN the network performance may be reduced because the data of both LANs must be transmitted or received 7 9 Default setting Please refer to the EXPRESSSCOPE Engine 3 Users Guide about differences between BMC Configuration s default values and values which BMC Configuration Initialization function will set 79 BMC Configuration User s Guide Revision History 1 00 1 01 1 02 1 20 1 21 1 30 1 31 1 32 2011 05 10 2011 06 24 2011 10 14 201
66. ss 1 Set the IP Address of Domain Controller Server 1 1 4 Blank Domain Controller Select Enable Disable of Domain Controller Server 2 1 Disable UA O MN Server Address 2 Set the IP Address of Domain Controller Server 2 1 4 Bank Domain Controller Select Enable Disable of Domain Controller Server 3 1 Disable Server 3 8 Server Address 3 Set the IP Address of Domain Controller Server 3 1 4 Blank 26 BMC Configuration User s Guide Jtem Description o Group 1 ____________ _ Displays a list of registered groups 220 No Thenumberallocatedtogroupisdispayed Group Name _____ _ The group name is displayed L0 Group Domain The domain name of Active Directory isdisplayed Privilege The privilege of the group is displayed Edit 1 Add or change group information Delete 1 5 Delete group information It is possible to set when Active Directory Authentication is Enable 2 It is possible to set less than 255 half size alphanumeric characters minus sign underscore and period 3 When Active Directory Authentication is enabled one or more of the Domain Controller Server should be enable 4 t is possible to set when each Domain Controller Server is Enable 5 It is possible to set only for the existing group 27 BMC Configuration User s Guide 4 2 6 Gr
67. stem Windows 2008 stands for Microsoft Windows Server 2008 Standard operating system Microsoft Windows Server 2008 Enterprise operating system and Microsoft Windows Server 2008 Datacenter operating system and Microsoft Windows Server 2008 Standard 32 Bit operating system and Microsoft Windows Server 2008 Enterprise 32 Bit operating system and Microsoft Windows Server 2008 Datacenter 32 Bit operating system Windows Server 2003 x64 Editions stands for Microsoft Windows Server 2003 R2 Standard x64 Edition Operating system and Microsoft Windows Server 2003 R2 Enterprise x64 Edition operating system or Microsoft Windows Server 2003 Standard x64 Edition operating system and Microsoft Windows Server 2003 Enterprise x64 Edition operating system Windows 2003 stands for Microsoft Windows Server 2003 operating system and Microsoft Windows Server 2003 Standard Edition and Enterprise Edition BMC Configuration User s Guide External Libraries which this product uses This product contains libraries External Libraries provided by the third party suppliers Suppliers Please assume and agree these libraries license documents and NOTICE files before using this product License documents and NOTICE files of External Libraries are stored in the following folders bmc config doc If the External Libraries require to include their Source Code with this product see the folder below bmc config src
68. t Receiver is Enable 6 The Alert Level are as follows Alert Level When Error is detected in each sensor type the alert is sent to the checked address Error Warning When Error or Warning is detected in each sensor type the alert is sent to the checked address Error Warning Information When Error Warning or Information is detected in each sensor type the alert is sent to the checked address Separate Setting You can arbitrarily select the event to alert in each sensor type 67 BMC Configuration User s Guide 5 2 10 System Operation This screen displays and sets the Remote KVM console and the Remote Media BMC Configuration Network Service Network Service User Account Active Directory LDAP Remote FD 51 EE Mal Alert SNMP Alert system Operation Control Miscellaneous Default Value BMC Configuration Network Servicel Network Service User Account Active Directory LDAP Mal Alert SNMP Alert System Operation Control Miscellaneous Mouse Cursor Mode Single Dual al Remote KV Console Encryption Enable Disable Port Mo Encryption Required 578 1024 65535 Part Enereption Required 7582 1024 65535 Mouse Cursor Mode C Singe Dual Mouse Coordinate Mode C Relative Absolute When server 15 13 Microsott Windows Absolute Mode rs recommended When 05 is Linux Relative Mode is recomme
69. the managed server PXE Boot is done It starts from the hard disk connected to the managed server CD DVD It starts from the CD DVD drive connected to the managed server Remote FD It starts from the FD drive media connected by the remote media function Remote CD DVD It starts from the CD DVD drive media connected by the remote media function Eu USB Memory It starts from USB Memory connected by the remote media function It starts from the FD drive or the removable mass storage connected to the managed server 70 BMC Configuration User s Guide 5 2 12 Miscellaneous This screen displays and sets the various functions of BMC BMC Configuration Network Serviced Network Service Uzer Account Active Directory LDAP Mal Alert SNMF Alert System Operation Control Miscellaneous SEL Behavior when SEL ES Ch Stop logging SEL Clear all SEL Overwrite oldest SEL Power Restore Delay AC LINK C Stay Off fe Last State C Power On Delay Time Required 40 seconds 40 600 PEF Flatfrom E went Filter Enable Disable IF PEF Configuration is set to disable SNMP alert wall not work Management Software ESMPR Management C Enable Ge Disable Authentication ken Required Redirection f Enable Disable Default salue Cancel Description Default Value SEL SEL setting Behavior when SEL Select the Behavior when SEL repository is full 1 Stop logging SEL repository
70. to perform any operation Operator Users who can operate the system except session management registration of license Remote KVM Media whole settings and update User General users who are only allowed to access the IPMI Information 59 BMC Configuration User s Guide 5 2 5 Active Directory This screen displays and sets the Active Directory BMC Configuration Mal Alert SAMP Alert System Operation Control Miscellaneous Network Servicell Network Service User 4ccount Active Directory LDAP Active Directory Active Director Authentication Enable Disable User Domain Mame Required Timeout Required 120 seconds 15 300 Domain Controller Server Address Required Domain Controller Server Address Reguired LF Domain Controller Server Address3 Required IEEE Group No Group Mame Group Domain Privilege Operation Default Value Active Directory Acti E A Active Directory Select Enable Disable of Active Directory Authentication Disable Authentication ll User Domain Name Set the user domain name used by Active Directory Blank e Authentication TL imeout ______ Set the timeout period with domain controller 1 Domain Controller Select Enable Disable of Domain Controller Server 1 1 Server Address 1 Set the IP Address of Domain Controller Server 1 1 4 Domain Controller Select Enable Disable of Domain Controller Se
71. troller Information Battery Controller Information Manufacturer Name FDK Device Mame 7 COTINES Firmware Revision supported Battery Type Approcamate Backup Time at Full Charge current load vum aer B l Approximate Backup Time at Full Charger maximum load mun sep Rated Capacity Rated Power Peak YA Charge Power Description Battery Controller Information Displays the information of the Battery Controller Manufacturer N Name The manufacturer name of the battery controller i is displayed Device Name _ The device name of the battery controller is displayed 1 Lrmware Revision The firmware revision of the battery c EE is displayed gene Backup Time at The approximate backup time minutes HE in fully charged Full Charge current load state at current load of the battery controller is displayed 1 2 Approximate Backup Time at The approximate backup time minutes seconds in fully charged Full Charge maximum load state at maximum load of the battery controller is displayed 1 2 Rated Capacity The rated capacity mAh of the battery controller is displayed Rated Capacity The minimum capacity of the battery controller based on the charge and discharge conditions of JIS C8708 2007 Rated Power The rated 1 power W of the battery is displayed Peak VA The peak power W of the battery is displayed 3 Charged Power The power
72. upport this function 44 Enable Boot Disable Disable Enable 3F8h IRQ 4 Enable 2F8h IRQ 3 Disabled VT 100 115200 8 1 None Hardware RTS CTS Enable BMC Configuration User s Guide 4 4 Battery Configuration If the managed server is equipped with a battery you can check and configure the information of the battery CHECK e Battery Configuration is not displayed if the managed server is not equipped with a battery e Select Battery Configuration in Off line TOOL 4 4 1 Battery Pack Information This screen displays the various information of the battery pack Battery Pack Information Ea Battery Pack Infomation Battery Packl Battery Pack Status Nomal Nomal Charge Status ully Charged uly Charged Battery Pack Eeplacement NoNed NoNed Remaining Charge 2500 mAh 2530m h Full Charge Capacity 2500m amp h Q2530m h Rated Capacity 2500m h 2500m h Voltage D443 0 D43 Current Ome O Manufacturer Hare FDK Model Name TCOTINES TOUHNES Battery Type NiMH O NiMH O Total Working Hours 888 Hows BD Hows Recharged Count l2Times fe Full Charged Count 78 Times Times Item Status The detected state of the battery pack is displayed e L Normal Warming Error NotMounted 1 Charge Status The charge status of the battery pack is displayed 1 Battery Pack Replacement The necessity of the battery p
73. ximum Minimum Average Average value of Memory Throttling The statistics values are reset These values are reference purpose only Each value might be different from the actual value which depends on your precise server configuration 2 Technology that decreases frequency or duty cycle of clock and suppresses power consumption 3 It is not displayed when the system does not support this function 39 BMC Configuration User s Guide 4 2 13 Control Control the managed server This setting is applied at the next booting time of the managed server BMC Configuration Network Service User amp ccount Active Directory LDAP Mal Alert SNMP Alert System Operation ECO Contral Miscellaneous One Time Boot Device Boot No Change Default Value Item Description Default Value _ s Time Boot Device One Time Boot Device setting Boot Device 4 Select the Device used at next boot No Change 1 The Boot Devices are as follows Boot Device Description No Change It follows the setting of System BIOS of the managed server PXE Boot is done It starts from the hard disk connected to the managed server CD DVD It starts from the CD DVD drive connected to the managed server Remote FD It starts from the FD drive media connected by the remote media function Remote CD DVD It starts from the CD DVD drive media connected by the remote media function SE USB Memory It starts from USB M
74. y ZH Select whether restore Battery settings or not Only when the target backup file exists the file name is displayed and able to be selected It is not displayed when the system does not support this function 50 BMC Configuration User s Guide 4 7 Clear BMC SEL If you select Clear BMC SEL on the menu of BMC Configuration you can clear all records of System Event Log 4 8 BMC Configuration Initialization If you select BMC Configuration Initialization on the starting screen you can restore all of BMC Configuration parameters to the default settings except for the part It will take about one minute to restart BMC IMPORTANT e This operation may cause data destruction e The following settings are not initialized Control settings SEL and Power Restore Delay in Miscellaneous settings e The initialization of the ECO settings is supported the following version BMC Configuration for Windows Ver 1 21 or later e If the managed server is equipped with a battery this item appears in BMC Battery Configuration Initialization and the Battery settings are also initialized 4 9 Reset BMC If you select Reset BMC on the menu of BMC Configuration you can reset BMC without rebooting system It will take about one minute to restart BMC IMPORTANT e Please use it when you can not operate the BMC functions correctly or if necessary e This operation does not clear the configuration settings 51 BMC Configuratio

NEC Express5800/R110f-1E User Guide

Contents

Download Pdf Manuals

Related Search

Related Contents