NEC Express5800/R110d-1E Appendix
Contents
1. im full quick y Command Parameter Description c lt controller gt Specify the RAID Controller to be processed lt controller gt RAID Controller Number l lt logicaldrive gt Specify the Logical Drive to be processed lt logicaldrive gt Logical Drive Number op start stop Specify that Initialize is started or stopped start Starts Initialize stop Stops Initialize im full quick Specify the Initialize Mode full Full Initialize quick Quick Initialize The full mode is selected if im is omitted im is valid only when op start is specified y Initialize the Logical Drive immediately without displaying the message of confirming that the Logical Drive may be initialized Description Starts Initialize of the specified Logical Drive or stops Initialize being executed for the specified Logical Drive Condition Starting Initialize can be provided for a Logical Drive with its Status being Online Stopping Initialize can be provided for a Logical Drive with its Status being Online or Degraded mkidc Overview Creates a Logical Drive with advanced parameter settings Format Making a Logical Drive having RAID Level of RAID O RAID 1 RAID 5 or RAID 6 raidcmd mkldc c lt controller gt p lt physicaldevice1 gt lt physicaldevice2 gt lt physicaldevicex gt lt physicaldeviceZ gt a lt diskarray gt rl O 1 5 6 cp lt capacity gt ss 1 2 4 8 12. used if im is omitted 8 Command Parameter Description Ey Creates the Logical Drive immediately without displaying the message of confirming that the Logical Drive may be created Description Creates a Logical Drive with advanced parameter settings The raidcmd create a Logical Drive and terminates after Initialize is started You can check the progress and result of the Initialize by using oplist and property commands RAID Levels allowed to be created RAID O RAID 1 RAID 5 RAID 6 RAID 10 RAID 50 Available Physical Devices Physical Devices with Status of Ready Physical Devices not used at all Available Disk Array Disk Array has empty area at the end The RAID Level of the Logical Drive to be created must be the same as that of the Logical Drive existing on the same Disk Array Configuration of Disk Array and Logical Drive to be created Creates a single Disk Array and a single Logical Drive with the specified Physical Devices if the Disk Array is created newly Capacity of Logical Drive with RAID Level of RAID 10 or RAID 50 For the RAID Level of RAID 10 or RAID 50 use the entire areas of Physical Devices to create a Logical Drive You cannot specify the capacities of the Physical Devices Condition This command can be executed only in the Advanced Mode mkids Overview Creates a Logical Drive with simple parameter settings Format raidcmd mklds c lt controller gt p lt physi
3. 6 32 64 128 256 512 1024 cm auto writeback writethru im full quick y Making a Logical Drive having RAID Level of RAID 10 raidemd mkldc c lt controller gt p lt physicaldevice1 gt lt physicaldevice2 gt lt physicaldevice3 gt lt physicaldevice 4 gt rl 10 ss 1 2 4 8 16 32 64 128 256 512 1024 cm auto writeback writethru im f full quick y Making a Logical Drive having RAID Level of RAID 50 raidcmd mkldc c lt controller gt p lt physicaldevice1 gt lt physicaldevice2 gt lt physicaldevice3 gt lt physicaldevice4 gt lt physicaldevice5 gt lt physicaldev ice6 gt lt physicaldeviceX gt rl 50 ss 1 2 4 8 16 32 64 128 256 512 1024 cm auto writeback writethru im full quick y Command Parameter Description c lt controller gt Specify the RAID Controller connecting with Physical Devices used for the Logical Drive lt controller gt RAID Controller Number Making a Logical Drive having RAID Level of RAID Specify Physical Devices used to create the Logical Drive or a Disk Array O RAID 1 RAID 5 or RAID 6 The format is different from the RAID Level of the Logical Drive to be p lt physicaldevice1 gt created lt physicaldevicex gt lt physicaldeviceZ gt Use p option to specify Physical Devices a lt diskarray gt lt physicaldevice1 2 x Z gt Physical Device Numbers Delimit Physi
4. Appendix B raidcmd Command Reference This chapter describes commands of the raidcmd CC Overview Starts or stops Consistency Check Format raidcmd cc c all lt controller gt l all lt ogicaldrive gt op start stop Command Parameter Description c all lt controller gt Specify the RAID Controller to be processed all all of RAID Controllers lt controller gt RAID Controller Number l all lt logicaldrive gt Specify the Logical Drive to be processed all all of Logical Drives on the RAID Controller specified by c lt logicaldrive gt Logical Drive Number op start stop Specify whether Consistency Check is started or stopped start Starts Consistency Check stop Stops Consistency Check Description Starts Consistency Check of the specified Logical Drive or stops Consistency Check executed for the specified Logical Drive Don t use when specified c with all Condition Allow to start Consistency Check to Logical Drive with the following situation RAID Controller has the function of Consistency Check The RAID Level of the Logical Drive is not 0 The status of the Logical Drive is Online It is not running Consistency Check to the Logical Drive now Allow to stop Consistency Check to Logical Drive with the following situation RAID Controller has the function of Consistency Check and stopping it The RAID Level of the Logical Drive is not 0 The s
5. a Logical Drive by using the entire areas of Physical Devices The actual capacity varies depending on the RAID Level Stripe Size 64KB Cache Mode Default mode of RAID Controller Initialization Mode Full oplist Overview Displays the list of operations performed in a RAID Controller and their progresses Format raidcmd oplist Description Displays the list of operations performed in a RAID Controller and their progresses Displayed operations Initialization Rebuild and Consistency Check Display of terminated operation oplist indicates operations being executed but does not indicate terminated operations 11 optctrl Overview Allows you to set optional parameters of a RAID Controller Format raidcmd optctrl c lt controller gt ip high middle low rp high middle low ccp high middle low pr enable disable prp high middle low be enable disable Command Parameter Description c lt controller gt Specify the RAID Controller to be processed lt controller gt RAID Controller Number ip high middle low Specify the Initialize Priority high High priority middle Middle priority low Low priority rp high middle low Specify the Rebuild Priority high High priority middle Middle priority low Low priority ccp high middle low Specify the Consistency Check Priority high High priority middle Middle priority low Low prio
6. cal Devices with Making a Logical Drive having RAID Level of RAID Specify a option to specify a Disk Array 10 lt diskarray gt Disk Array Number p lt physicaldevice1 gt lt physicaldevice2 gt lt physicaldevice3 gt lt physicaldevice4 gt Making a Logical Drive having RAID Level of RAID 505 p lt physicaldevice1 gt lt physicaldevice2 gt lt physicaldevice3 gt lt physicaldevice4 gt lt physicaldevice5 gt lt physicaldevice6 gt lt physicaldevicex gt rl 0 1 5 6 10 50 Specify the RAID Level of the Logical Drive to be created as follows 0 RAID O 1 RAID 1 5 RAID5 6 RAID 6 10 RAID 10 50 RAID 50 cp lt capacity gt Specify the capacity of the Logical Drive to be created lt capacity gt capacity in GB Creates the Logical Drive of the maximum capacity available if cp is omitted ss 1 2 4 8 16 32 64 128 256 Specify the Stripe Size of the Logical Drive to be created 512 1024 1KB 2KB 4KB 8KB 16KB 32KB 64KB 128KB 256KB 512KB 1024KB The default value for the RAID Controller is used if ss is omitted cm auto writeback writethru Specify the Cache Mode of the Logical Drive to be created auto Auto Switch writeback Write Back writethru Write Through The default value for the RAID Controller is used if cm is omitted im ffull quick Specify the Initialize Mode of the Logical Drive to be created full Full mode quick Quick mode The full mode is
7. caldevice1 gt lt physicaldevice2 gt lt physicaldevicex gt lt physicaldeviceZ gt rl 1 5 y c lt controller gt Specify the RAID Controller connecting with Physical Devices used for the Logical Drive lt controller gt RAID Controller Number p lt physicaldevice1 gt lt physicaldevice2 gt Specify Physical Devices used to create the Logical Drive lt physicaldevicex gt lt physicaldeviceZ gt lt physicaldevice1 2 X Z gt Physical Device Number Delimit the physical devices with rl 1 5 Specify the RAID Level of the Logical Drive to be created 1 RAID 1 5 RAID5 Ey Creates the Logical Drive immediately without displaying the message of confirming that the Logical Drive may be created Description Creates a Logical Drive simply by specifying only two parameters or Physical Devices used for the Logical Drive and RAID Level The raidcmd creates a Logical Drive and terminates after Initialize is started You can check the progress and result of the Initialize by using oplist and property commands RAID Levels allowed to be created RAID 1 RAID 5 Available Physical Devices Physical Devices with Status of Ready Physical Devices not used at all Configuration of Disk Array and Logical Drive to be created Creates a single Disk Array and a single Logical Drive with the specified Physical Devices Other parameters Creates a Logical Drive with parameters set as follows Capacity Creates
8. gt RAID Controller Number p lt physicaldevice gt Specify the Physical Device to be processed lt physicaldevice gt Physical Device Number st online offline Specify the altered status online Online status offline Failed status y Changes the status without the message of confirming that the status may be changed Description Changes the Status of the specified Physical Device to Online or Failed Condition This command can be executed only in the Advanced Mode
9. leted Logical drives at the top and middle of the Disk Array cannot be deleted Deletion of Disk Array If deleting Logical Drive and Disk Array becomes not to have Logical Drive any more the Disk Array is deleted automatically Condition This command can be executed only in the Advanced Mode econfig Overview Configures a RAID System with a RAID Controller easily Format raidcmd econfig Description Executes easy configuration which can automatically configure a RAID System with the specified RAID Controller For details of the easy configuration see Configuring RAID System Easily of Universal RAID Utility User s Guide help Overview Displays the help of raidcmd Format raidcmd help lt subcommand gt Command Parameter Description lt subcommand gt Specify the command name to see the help If command name is omitted displays the list of command Description Displays the description of each command of raidcmd If don t specify the command name as command parameter displays the list of all of command hotspare Overview Makes or removes a Hot Spare Format raidcmd hotspare c lt controller gt p lt physicaldevice gt mr make a lt diskarray1 gt lt diskarrayX gt remove by Command Parameter Description c lt controller gt Specify the RAID Controller to be processed lt controller gt RAID Controller Number p lt physicaldevice gt Specify the Ph
10. nly in the Advanced Mode property Overview Displays the properties of RAID Controllers Disk Arrays Logical Drives and or Physical Devices Format raidcmd property tg all rc c lt controller gt da c lt controller gt a lt diskarray gt Id c lt controller gt l lt logicaldrive gt pd c lt controller gt p lt physicaldevice gt Command Parameter Description tg all Indicates the properties of all RAID Systems tg rc c lt controller gt Indicates the property of the specified RAID Controller Specify a RAID Controller Number with c to indicate the property of the specific RAID Controller Omit c to indicate the properties of all RAID Controllers lt controller gt RAID Controller Number tg da c lt controller gt a lt diskarray gt Indicates the property of the Disk Array Specify a RAID Controller Number with c Specify a Disk Array Number with a to indicate the property of the specific Disk Array Omit a to indicate the properties of all Disk Arrays for the RAID Controller specified with c lt controller gt RAID Controller Number lt diskarray gt Disk Array Number tg Id c lt controller gt l lt logicaldrive gt Indicates the property of the Disk Array Specify a RAID Controller Number with c Specify a Logical Drive Number with a to indicate the property of the specific Logical Drive Omit I to indicate the properties of all Logical Drives for the RAID Controller s
11. ogical Drive Condition This command can be executed only in the Advanced Mode Starting Rebuild can be executed for a Physical Device with Status being Failed used by a Logical Drive with Status being Degraded rescan Overview Update the RAID System management information of the Universal RAID Utility Format raidcmd rescan Description This command collects the configuration information and state information of all of RAID systems managed by the Universal RAID Utility The management information of RAID System in the Universal RAID Utility is the newest state by this command 16 runmode Overview Changes the RAID System Management Mode of the raidcmd Format raidcmd runmode md a s Command Parameter Description md a s Specify the altered RAID System Management Mode If md option is not specified shows the current RAID System Management Mode a Advanced mode s Standard mode Description Changes the RAID System Management Mode of the raidcmd or indicates the current RAID System Management Mode Valid period of mode after change The RAID System Management Mode is valid unless it is changed by runmode command The RAID System Management Mode remains unchanged if the computer is rebooted sbuzzer Overview Stops the Buzzer on a RAID Controller Format raidcmd sbuzzer c lt controller gt Command Parameter Description c lt controller gt Specify the RAID C
12. ontroller to be processed lt controller gt RAID Controller Number Description Stops the Buzzer sounding in the specified RAID Controller The command terminates normally if it is executed without Buzzer sounding slotlamp Overview Turns on or off the DISK lamp of the computer or enclosure in which Physical Devices are installed Format raidcmd slotlamp c lt controller gt p lt physicaldevice gt sw on off Command Parameter Description c lt controller gt Specify the RAID Controller to be processed lt controller gt RAID Controller Number p lt physicaldevice gt Specify the Physical Device to be processed lt physicaldevice gt Physical Device Number sw on off Specify that the lamp is turned on or off on Turns on the lamp off Turns off the lamp Description Turns on or off the DISK lamp on the computer or enclosure in which the specified Physical Device is installed Executing the raidcmd with sw on while the DISK lamp is already ON causes the command to terminate normally Executing the raidcmd with sw off while the DISK lamp is already OFF causes the command to terminate normally stspd Overview Changes the status of a Physical Device to online or failed forcibly Format raidcmd stspd c lt controller gt p lt physicaldevice gt st online offline y Command Parameter Description c lt controller gt Specify the RAID Controller to be processed lt controller
13. pecified with c lt controller gt RAID Controller Number lt logicaldrive gt Logical drive number tg pd c lt controller gt Indicates the property of the Disk Array Specify a RAID Controller Number with c Specify a Physical Device Number with a to indicate the property of the specific Physical Device Omit p to indicate the properties of all Physical Devices for the RAID Controller specified with c lt controller gt RAID Controller Number lt physicaldevice gt Physical device number p lt physicaldevice gt Description Displays the properties of RAID Controllers Disk Arrays Logical Drives and or Physical Devices The properties of all managed RAID Systems connected to the computer or those of specific RAID Controllers Disk Arrays Logical Drives and Physical Devices can be displayed rebuild Overview Starts or stops Rebuild Format raidcmd rebuild c lt controller gt p lt physicaldevice gt op start stop Command Parameter Description c lt controller gt Specify the RAID Controller to be processed lt controller gt RAID Controller Number p lt physicaldevice gt Specify the Physical Device to be processed lt physicaldevice gt Physical Device Number op start stop Specify that Rebuild is started or stopped start Starts Rebuild stop Stops Rebuild Description Starts Rebuild of the specified Physical Device or stops Rebuild being executed for the specified L
14. rity pr enable disable Specify whether Patrol Read is executed or not enable Executed disable Not executed prp high middle low Specify the Patrol Read Priority high High priority middle Middle priority low Low priority be enable disable Specify whether the Buzzer is enabled or disabled enable Enabled disable Disabled Description Allows you to set optional parameters of the specified RAID Controller including Initialize Priority Rebuild Priority Consistency Check Priority Patrol Read execution and Priority and Buzzer enable disable Only a single parameter can be set at a time Concurrent set of more than one parameter is disabled Condition This command can be executed only in the Advanced Mode optid Overview Allows you to set optional parameters of a Logical Drive Format raidcmd optld c lt controller gt l lt ogicaldrive gt cm auto writeback writethru Command Parameter Description c lt controller gt Specify the RAID Controller to be processed lt controller gt RAID Controller Number l lt ogicaldrive gt Specify the Logical Drive to be processed lt logicaldrive gt Logical Drive Number cm auto writeback writethru Specify the Cache Mode auto Auto Switch writeback Write Back writethru Write Through Description Allows you to set optional parameters Cache Mode of the specified Logical Drive Condition This command can be executed o
15. tatus of the Logical Drive is Online or Degraded It is running Consistency Check to the Logical Drive now CCS Overview Starts Consistency Check of Logical Drives in the RAID Controllers in which Patrol Read is not supported Format raidcmd ccs Description Starts Consistency Check of Logical Drives in the RAID Controllers in which Patrol Read is not supported Condition Allow to start Consistency Check to Logical Drive by ccs with the following situation RAID Controller does not have the function of Patrol Read RAID Controller has the function of Consistency Check The RAID Level of the Logical Drive is not O The status of the Logical Drive is Online It is not running Consistency Check to the Logical Drive now delld Overview Deletes a Logical Drive Format raidcmd delld c lt controller gt l lt ogicaldrive gt y c lt controller gt Specify the RAID Controller to be processed lt controller gt RAID Controller Number l lt logicaldrive gt Specify the Logical Drive to be processed lt logicaldrive gt Logical Drive Number Ey Deletes the Logical Drive immediately without displaying the message of confirming that the Logical Drive may be deleted Description Deletes the specified Logical Drive Logical drive allowed to be deleted If more than one Logical Drive exist in a single Disk Array only the Logical Drive located at the end of the Disk Array can be de
16. ysical Device to be processed lt physicaldevice gt Physical Device Number mr make Specify that a Hot Spare is made or removed make Makes a Hot Spare Depending on whether the a option exists or not the type of the Hot Spare to be made varies Global or Dedicated Specify Disk Arrays to be subject to hot swap if a Dedicated Hot Spare is made If the a option does not exist for making a Hot Spare a Global Hot Spare will be made with the specified Physical Device If the a option exists and Disk Arrays are specified correctly for making a Hot Spare a Dedicated Hot Spare will be made with the specified Physical Device lt diskarray1 gt lt diskarrayX gt Disk Array Numbers a lt diskarray1 gt lt diskarrayX gt remove remove Removes a Hot Spare Ly Changes the status without displaying the message of confirming that the Hot Spare is made or removed Description Makes a Global or Dedicated Hot Spare with the specified Physical Device or removes the Hot Spare of the specified Physical Device Condition The capacity of the Physical Device to be a Dedicated Hot Spare should be equal to or larger than that of any Physical Device used in the Disk Array Dedicated Hot Spares cannot be made in a Disk Array containing one or more Logical Drives with RAID Level being RAID O init Overview Starts or stops Initialize Format raidcmd init c lt controller gt l lt logicaldrive gt op start stop
Download Pdf Manuals
Related Search