Home

Navman iCN-700 Series User's Manual

Contents

1. 2 Select a destination point Set a destination either by using the address entry wizard or by using the Maps see below a Locate your destination b Tap and hold your destination to display the Map menu c Select Navigate To The Map menu will close and the map screen will display the calculated route 3 Demonstrate the route Once the route has been determined you can demonstrate the route by completing the following a Tap and hold the Map screen to display the Map menu b Select Route The Route submenu will display c Select Demonstrate The 3D Map screen will display the calculated route in Route Demonstration mode If you have selected the Loop demonstrations check box on the Demonstration and Logging preferences screen the Route Demonstration will continue to repeat the route 75 How do I view my route Statistics The iCN provides information on your distance travelled average speed maximum speed time taken for trip 7 stationary time Trip information is presented in two different ways These are information for the current trip information for all trips to date or since the tripmeter was last reset How do view statistics on my current route The Tripmeter Current Route screen is used to view statistical information for your current trip The Tripmeter Current Route screen will only display when there is a current route selected If there is no route selected the Tr
2. USER MANUAL ICN ZOO series with SmartSI 2006 English Australia Canada United States ICN ZOO series User Manual English Australia Canada United States 2006 Brunswick New Technologies Asia Pte Limited Navman is a registered trademark of Brunswick New Technologies Asia Pte Limited and is used under licence by Navman New Zealand Navman is part of the Brunswick Group headquarters Chicago IL All rights reserved The software contains proprietary information of Navman it is provided under a licence agreement containing restrictions on use and disclosure and is also protected by copyright law Reverse engineering of the software is prohibited No part of this publication may be reproduced stored in a retrieval system or transmitted in any form or by any means electronic mechanical photocopying recording or otherwise without the prior written permission of Navman Back On Track Drive Away Nav PiX SmartST and Turn by Turn are either registered trademarks or trademarks of Brunswick New Technologies Asia Pte Limited and are used under licence by Navman New Zealand All rights reserved Microsoft Windows 2000 and XP SP1 Microsoft Internet Explorer and ActiveSync are either registered trademarks or trademarks of Microsoft Corporation in the United States and or other countries All rights reserved Adobe and Adobe Reader are either registered trademarks or trademarks of Adobe Systems Incorporated in
3. What else can do What else can do When you want to Then view your recent locations use Recent Locations see How do navigate to a recent location on page 70 calculate a route that avoids a specified use Avoid an Area see How do avoid an area on area on the map page 73 preview your route or plan and view a route use the Route Demonstrator see How do preview a without a GPS fix route on page 74 view statistical information on both your use the Trip Meter see How do view my route statistics current trip and all trips to date on page 76 WARNING For your safety enter destination information before you start a journey Do not enter a destination while driving In this section How do I navigate to a recent location as xccecnisnctsnnvantnca means dannnouwdendacaten inns Siena sieht nnpnnibddeananebemnbaamadennennes 70 How do l use the Map Menu cs ceca ca ececice nls seca eevale tin clonca ouiysicd gnudsenenauussiol ape dlacanleyaceumdiGudiaumulsccmeniveuss 71 How do avoid an area ccccscccesceaptoneotenndcacteuguaretestensabeninceotesgdedeans ata penevassscavheientenndraceeutiayetesbeuneGieeeoieeats 73 How do preview a route ses cscipeucs scene co casencac eu enemas tag de ceeetveue cicayo a screuee a ame erence ee 74 How do I view my route Stat SUCS ete cise eecoecuenisaieawuvenaceinesaduas udsenneumernis oie weninerenedciniqrscenduuesd menaendeneelae 76 69 ICN 700 ser
4. A message informing you that your route is being re calculated will display at the top of the screen The Information button will display the percentage complete status of the route re calculation To cancel a route re calculation tap a warning will display asking you to confirm the cancellation If confirmed both the re calculation and your current route will be cancelled 50 2 NAVMAN ICN 700 series How do save Favorites and My Home How do save Favorites and My Home You can save up to 200 destinations as Favorites one of which can be saved as My Home My Home can be any designated Favorite but we recommend that it is your home or other common destination You can save a Favorite from the Destination Preview screen after searching for an address or from the Maps Menu on the 3D or 2D Map screens For more information see How do use the Map Menu on page 71 Can assign a photo to a Favorite You can assign a photo to any of your existing Favorites For more information see How do assign a photo to a Favorite on page 68 How do I save a Favorite Search for an address until the Destination Preview screen is displayed 1 Tap Save The New Favorite screen will display 1001 Croes Ave 1001 Croes Ave Bronx Hew York 10472 USA save as My Home save as Favorite New Favonte 2 To change the name of the Favorite tap E The Keyboard screen will display Edit Name Aft
5. F Alert me when my speed exceeds 60 mph C Wam me not to operate my iCN while driving lt Onver Alerts 99 iCN 700 series Reference NAVMAN Complete the following If you want to enable a warning chime when select the speed in the Alert me when my speed exceeds check box travelling at or above a designated speed select your preferred speed select your preferred speed from the Speed box enable a visual warning if the select the Warn me not to operate my iCN while driving check box Main Menu screen is accessed in a moving vehicle Your preferences are automatically saved Tap to return to the previous screen Demonstration and Logging gt Ed gt gt gt Route Demonstration F Demonstrate routes F Loop demonstrations SmartST shop demonstration GPS Logging a Enable GPS data logging Demonstration and Logg Complete the following enable the route demonstration select the Demonstrate routes check box This allows you to plan and view a route without a GPS fix enable the route demonstration to select the Loop demonstrations check box play repeatedly enable a shop demonstration of select the SmartST shop demonstration check box After a 10 SmartST to be played second delay the route demonstration will navigate between your first and second Favorite enable GPS data logging contact Navman Customer Support as we recommend this feature be used only under
6. FORK FORKS FORT FREEWAY GARDEN GARDENS GATEWAY GLEN GLENS GREEN GREENS GROVE GROVES HARBOR HARBORS HAVEN HEIGHTS HIGHWAY HILL HILLS HOLLOW HOUSE INLET ISLAND ISLANDS ISLE JUNCTION JUNCTIONS 115 ICN 700 series Reference Country United States of America Street Type KEY KEYS KNOLL KNOLLS LAKE LAKES LANDING LANE LIGHT LIGHTS LOAF LOCK LOCKS LODGE LOOP MANOR MANORS MARKET MEADOW MEADOWS MILL MILLS MISSION MOTORWAY MOUNT MOUNTAIN MOUNTAINS NECK ORCHARD OVAL OVERPASS PARK PARKS PARKWAY PARKWAYS PASS PASSAGE PATH PIKE PINE PINES PLACE PLAIN PLAINS PLAZA POINT POINTS PORT PORTS 116 ee V NAVMAN Abbreviation KY KYS KNL KNLS LK LKS LNDG LN LGT LGTS LF LCK LCKS LDG LOOP MNR MNRS MKT MDW MDWS ML MLS MSN MTWY MT MTN MTNS NCK ORCH OVAL OPAS PARK PARKS PKWY PKWYS PASS PSGE PATH PIKE PNE PNES PL PLN re NAVMAN Country United States of America Street Type PRAIRIE RADIAL RAMP RANCH RIDGE RIDGES RIVER ROAD ROADS ROUTE ROW RUE RUN SHOAL SHOALS SHORE SHORES SKYWAY SPRING SPRINGS SPUR SPURS SQUARE SQUARES STATION STRAVENUE STREAM STREET STREETS SUMMIT TERRACE THROUGHWAY TRACE TRACK TRAFFICWAY TRAIL TUNNEL TURNPIKE UNDERPASS UNION UNIONS VALLEY VALLEYS VIADUCT VIEW VIEWS VILLAGE VILLAGES VILLE VISTA ICN 700 series Abbreviation PR RADL RAMP RNCH RDG RDGS
7. J at Ve K Thurston Sty Mei T e ai FEA ah ee THI dene a i f a i if F Ben men Waypoint Preview 34 JN NAVMAN C d Tap Add ICN 700 series How do go from A to B The destination is automatically saved and the Multi Stop Trip Planner screen will display My Current Location 75 0ak Rd 51 Dabbs Hill Lane Wade Ave John s Cross Rd Multi stop Top Planner Complete one or more of the following If you want to add another waypoint Waypoints added after a multi stop trip has commenced will not be included in the current route calculate the route change the order of your waypoints display the geographical details of a waypoint delete all waypoints delete one waypoint save the multi stop trip as a Favorite tap Add The Destination Search screen will display Return to step 3 tap Go The Multi Stop Trip Preview screen will display Tap Go The Map screen will display the calculated route tap a destination point to move The Waypoint Preview screen will display Tap Move up or Move down The Multi stop Trip Planner screen will display tap a destination point The Waypoint Preview screen will display Tap Details The Waypoint Details screen will display tap a destination point to delete The Waypoint Preview screen will display Tap Delete The Multi stop Trip Planner screen will display tap Save The New Fav
8. On the Edit menu click New to create a new POI or Modify to edit the selected POI The PO Details window will open POI Details Description Degrees Minutes Seconds Decimal Degrees Latitude 0 2 z A Longitude 0 3 Cancel b Type a description for the POI in the Description box c Complete one of the following If you know the degrees minutes and seconds of the on the Degrees Minutes Seconds tab type or select the POI degree minute and second of the POI latitude in the Latitude boxes and the POI longitude in the Longitude boxes Select N S E or W to designate the hemisphere of the co ordinates 91 iCN 700 series How do install Custom Points of Interest y NAVMAN If you know the decimal degrees of the POI on the Decimal Degrees tab type the POI latitude in the Latitude box and the POI longitude in the Longitude box Select N S E or W to designate the hemisphere of the co ordinates d Click OK to save the POI 3 Repeat step 2 until all POIs have been added to the POI file 4 Click Hi The POI file is saved You are now ready to copy your custom POI file to your iCN For more information see How do copy a Custom POI file to my ICN on page 92 How do copy a Custom POI file to my ICN Map Points of Interest 1 Openor create a POI file 2 Click Al The POI Options window will open E You can open the POI Options window at any time by cli
9. RV RD Reference ICN 700 series Reference Country United States of America Street Type WALK WALKS WALL WAY WAYS WELL WELLS h NAVMAN Abbreviation WALK WALK WALL WAY WAYS WL WLS Street types Canada Country Canada ABBEY ACRES ALLEE ALLEY AUTOROUTE AVENUE English AVENUE French BAY BEACH BEND BOULEVARD English BOULEVARD French BY PASS BYWAY CAMPUS CAPE CARR CARREFOUR CENTER English CENTER French CERCLE CHASE CHEMIN CIRCLE CIRCUIT CLOSE COMMON CONCESSION CORNERS COTE COUR COURT COVE CRESCENT CROISSANT CROSSING 118 ABBEY ACRES ALLEE ALLEY AUT AVE AV BAY BEACH BEND BLVD BOUL BYPASS BYWAY CAMPUS CAPE CAR CARREF CTR C CERCLE CHASE CH CIR CIRCT CLOSE COMMON CONC CRNRS COTE COUR CRT COVE CRES CROIS CROSS en NAVMAN Country Canada ICN 700 series Reference Street Type Abbreviation CUL DE SAC DALE DELL DIVERSION DRIVE ECHANGEUR END ESPLANADE ESTATES EXPRESSWAY EXTENSION FARM FIELD FOREST FREEWAY FRONT GARDENS GATE GLADE GLEN GREEN GROUNDS GROVE HARBOUR HEIGHTS HIGHLANDS HIGHWAY HILL HOLLOW ILE IMPASSE ISLAND KEY KNOLL LANDING LANE LIMITS LINE LINK LOOKOUT LOOP MALL MANOR MAZE MEADOW MEWS MONTEE MOOR MOUNT MOUNTAIN CDS DALE DELL DIVERS DR ECH END ESPL ESTATE EXPY EXTEN FARM FIELD FOREST FWY FRONT GDNS GATE GL
10. The nearest appears at the top of the list AERO STAR PETROLEUM Eddyville i ATLANTIC REFINING amp MARKETING BEACON New Paltz CHESTNUT MOBIL New Paltz CHESTNUT MOBILE MART Gardiner COURTESY MOBIL NEW PALTZ Ne GETTY MART Eddyville b Select a gas station from the list The Destination Preview screen will display STONE RIDGE CITGO INC E Save Prefs _ Go Destination Preview c Tap Go Your route is calculated the 3D Map screen will display 37 iCN 700 series How do go from A to B y NAVMAN How do find the nearest parking area You can press to quickly find the nearest parking area This case study will show you how to set your destination by locating and selecting a parking area Point of Interest POI As POls are grouped by category including parking areas the iCN will show you a list of the nearest parking areas based upon your current location a Press P The Select POI screen will display showing a list of the nearest parking areas based upon your current location The nearest appears at the top of the list CENTRAL PARKING SYSTEM Jamaica x E JFK AIRPORT PARKING Jamaica SHIM DONALD Jamaica F 99 MAIN GARAGE CORP Jamaica E 724 MANAGEMENT CORP Flushing A 1 PARKING MANAGEMENT CORP BANG S PARKING Jamaica b Select a parking area from the list The Destination Preview screen will display JFK AIRPORT
11. press on top of the ICN You can also access the Camera screen from the Main Menu tap 2 When the Camera screen is open an image of whatever the camera is focused on will display in the Viewfinder Before you take a photo you can customize the lighting and brightness settings For more information see How do customize camera preferences on page 60 3 When you are satisfied with the image displayed in the Viewfinder press to take the photo You can also tap O to take the picture 4 The captured image will preview in the Viewfinder for two seconds before it is automatically saved in your Album on the iCN s hard drive E lf the Camera screen is inactive for more than two minutes it will revert to the Main Menu screen GPS fix The GPS icon indicates whether the iCN has a GPS fix and the strength of the signal When the iCN has a GPS fix and a picture is taken location co ordinates are linked to the picture The co ordinates must be available for you to save a picture as a Favourite destination Location co ordinates are displayed on the Photo Details screen For more information see Photo management on page 63 59 ICN 700 series How do use the camera y NAVMAN How do customize camera preferences The Camera has lighting and brightness settings which you can customise before taking a photo Lighting options 1 To view the Camera screen press 2 From the Camera screen tap The range o
12. Bottom components im Component Description RESET Resets the iCN For more information see How do turn my iCN off on page 19 BATTERY Must be set to ON for normal use Switching to OFF turns the battery off which saves battery power Het shoe plate Connection Connection plate for the Pt or T1 module for the P1 or T1 module A NAVMAN iCN 700 series Welcome Back components Jeomponent Descripton OOO O oe o mees Volume The volume on your iCN can be adjusted either by the volume control on the iCN or by using the three volume control buttons on the remote control may be sold separately These are described below Volume Control on ICN To hear a sound test and adjust the volume rotate the Volume control up or down The volume bar displays as green To mute the volume press the Volume control The volume bar displays as and indicates that the volume is muted To make the volume active rotate the Volume control up or down The volume bar displays as green iCN 700 series Welcome NAVMAN Internal battery The iCN has an internal battery that when fully charged should power the iCN for up to 2 5 hours The battery indicator light on the front of the iCN indicates the level of internal battery charge 7 Green battery full Red battery low 7 Orange battery charging How do monitor the battery status You can monitor battery power status at the Power screen For more informatio
13. Each Major Road Network map covers a large area such as Western Europe or Canada and the United States continental and contains main roads that connect cities and towns You can select a road or Point of Interest on the Major Road Network map as your departure point or destination All Major Road Network maps contain roads and ferry connections of high national and international importance use less memory than would be necessary to install all equivalent detailed maps exclude smaller roads and have a reduced level of geographical detail Major Road Network map table Description Region of Purchase Australia or All Does not require a Major Road Network map as New Zealand detailed maps of either Australia or New Zealand are pre installed on your iCN Does not require a Major Road Network map as detailed maps of Canada and the United States continental are pre installed on your iCN Western Europe iCN 720 A Major Road Network map of Western Europe is pre installed on your iCN iCN 750 Does not require a Major Road Network map as detailed maps of Western Europe are pre installed on your iCN How do I install or reinstall a Major Road Network map Major Road Network maps can be installed to a new memory card or reinstalled to your iCN hard drive using SmartST Desktop For more information see How do install maps from CD on page 85 Canada and United States 89 ICN 700 series How do install Custom Poi
14. PARKING J Detaits Save a Prefs 60 Destination Preview c Tap Go Your route is calculated the 3D Map screen will display 38 2 NAVMAN iCN 700 series How do go from A to B How do search for other POIs Select a POI destination using the Destination Search Keyboard and Destination Preview screens which used together form a POl entry wizard This section describes how to use each of these screens and provides a case study to help guide you through setting your POI Quick Steps 1 Open the Destination Search screen Select the country and state 2 3 Select the type of POI 4 Tap Go Case Study How do search for a Point of Interest This case study will show you how to set your destination by selecting a Point of Interest POI 1 Open the Destination Search screen gt amp New York USA Change State Search for City Area Postcode Street Point of Interest Destination Search The Destination Search screen will display If this is the first time you are setting your destination and you have maps from more than one country installed and selected then the Select Country screen will display instead of the Destination Search screen Go directly to step 2b The next time you perform this procedure the Destination Search screen will open as expected 39 2 Select the country and state If this is the first time you are setting your
15. The number of discs included depends on the country of purchase In Car Installation Guide JA NAVMAN Global Support Information Registration card ie Typographical conventions It is important to understand the terms and typographical conventions used in this manual Formatting The following kinds of formatting in the text identify special information Convention Type of Information Bold iCN components or items displayed on screen including buttons headings field names and options Italics Indicates the name of a screen Icons The following icons are used throughout this manual Description i A Terms The following terms are used throughout this manual to describe user actions Term Description Press and release a button quickly Tap an item in a list or tap a command from a menu Press and release an item displayed on the touch screen Tap and hold Press and hold an item displayed on the touch screen for 2 3 seconds iCN 700 series Welcome y NAVMAN Getting to Know your ICN We recommend that you familiarize yourself with the iCN s basic operations Front components 74 Harrison St 00 OO iCN720 Battery indicator Indicates the level of internal battery charge 7 Green battery full Red battery low 7 Orange battery charging For more information see Internal battery on page 16 Displays maps and menu options Tap to select menu options or enter
16. You will be directed to your destination by vocal and visual instructions You can view your route in several ways by pressing to cycle through the map screens In this section 3D Map Screem Remeron ee 44 AID MAD screen rore NT ahs Seo in hace San stash lela tied Ahk Gaon eta NT Dsl Seo E al hla 46 Next Turn Sree Marara aa en asetsecuens ade sametebet ees a EEan e aA e EEE EEA ASETA 48 DIRECTION ISR Sereen trn r a a dull tac nr a cul cna uu es cnet 49 43 3D Map screen The 3D Map screen is oriented to your travelling direction To view the 3D Map screen when a route has been calculated press S to cycle through the screens Tap and drag the screen to move across the map Tap and hold the map to view Map menu For more information see How do I use the Map Menu on page 71 0 4 OOQ 74 Harrison St iem peseto Direction of next turn The direction of your next turn o OO 606 To repeat the voice prompt of your next turn tap the turn arrow Ld Distance to next turn The distance to your next turn Next instruction The direction and name of the street to turn in to When you cycle through the Information options a function description will display briefly at the top of the screen Next turn arrow Your next turn is highlighted in a different colour from future turns The default colour of your next turn is green but will depend on the colour theme you are using Current position Your
17. area of your destination The Destination Search screen will display Go to Centre of City Area Search for Street Point of Interest Destination Search 4 Search for the street a From the Destination Search screen tap Street The Keyboard screen will display Crescent Dr Brentwood Crescent Pl Brentwood e There may be multiple matches for a particular street name Long streets that run through several neighbouring areas and common street names for example Main Street will produce matches that are distinguished by their associated city or area name 26 2 NAVMAN ICN 700 series How do go from A to B Using the Keyboard screen The Keyboard screen will display when you are required to enter text such as when searching for a street name As you tap each character the first two matching results will display Tap RA to see more search results Search results will be listed in matching order with the closest matches appearing at the top of the list A maximum of 99 results will display The Keyboard screen can display in three modes alphabet alternate and number symbol 5 Crescent Dr Brentwood 20 28 Crescent Dr Brentwood As you select each character the first two results will display Tap Ka to see more search results To select a character or a search result tap the character or search result To delete a character tap To display the number symbol Keyboard scre
18. button on the bottom of your iCN Your iCN will restart iCN 700 series What are the main screens that will use A NAVMAN What are the main screens that will use Map screens There are four map screens used to view the route to your destination 3D Map 2D Map Next Turn Direction List To display the 3D Map screen or the map screen that you were last viewing press S press again to cycle through the map screens i a NL End Avel ie arran St 74 Harrison St For more information on the map screens see How do view my route on page 43 For information on using the Map menu from the 3D Map and 2D Map screens see How do I use the Map Menu on page 71 Main Menu screen The Main Menu screen provides access to all of the iCN s navigation functions To access the Main Menu at any time press to select a Main Menu option tap the required icon i Favontes s a Preferences Camera Main Menu 20 2 NAVMAN ICN 700 series What are the main screens that will use Go To Menu screen The Go To Menu screen is your starting point for specifying a destination From the Go To Menu screen you can navigate to My Home an address Point of Interest Favorite recent location or set a multi stop trip To access the Go To Menu at any time press or tap from the Main Menu screen to select a Go To Menu option tap the required icon Go To Menu For information
19. current position is marked with Status bar Displays one of the following The name of the street you are located on Speed warnings Active POIs 44 2 NAVMAN iCN 700 series How do view my route a e Information Displays one of the following options Time km h or mph Speed TTG Time to Go DTG Distance to Go ETA Estimated Time of Arrival Tap to cycle through the options During a Multi trip journey Time to Go Distance to Go and ETA will display as Time to Waypoint Distance to Waypoint and ETA at eee pe Your current route is highlighted 3 Cancel route Cancels your current route Zoom To view zoom options tap To display a smaller area in greater detail tap or scroll down To display a larger area in less detail tap or scroll up Compass and GPS Displays one of the following options information Green Quadrants A valid GPS signal is being used to fix your position displays between one and four quadrants to indicate the strength of the signal Red Circle No GPS signal Compass heading Tap to cycle through the options tap and hold to display the GPS Status screen 45 iCN 700 series How do view my route y NAVMAN 2D Map screen The 2D Map screen shows your current position if a GPS fix is active and surrounding street names If a route has been calculated the route and turns are highlighted The 2D Map screen is displayed Course Up unless the Map Dis
20. destination and you have maps from only one country but more than one state installed and selected then the Select State screen will display instead of the Destination Search screen The next time you perform this procedure the Destination Search screen will open as expected If you only have the map of one country installed and selected that country is selected for your destination by default and cannot be changed Go to step 3 a From the Destination Search screen tap Change Country or State The Select Country screen will display Belgie Belgique Citta del Vaticano Danmark Deutschland Espana France lt Select a country b Select a country from the list The Select State screen will display Connecticut New York Rhode Island Select a state If you only have the map of one state installed and selected that state is selected for your destination by default Go to step 3 c From the Select State screen select a state from the list The Destination Search screen will display New York USA Change State Search for City Area Postcode Street Point of Interest Destination Search 40 A NAVMAN iCN 700 series 3 Select the type of POI i To narrow the search for a type of POI you can first search by Area a From the Destination screen tap Point of Interest The Select POI screen will display M Important Tourist Attraction Library Fay Monum
21. for Freeways slider towards Less often to use freeways roads other than freeways where possible when calculating a route E This option may not completely remove Freeways from a route move the Preference for Freeways slider towards More often to use freeways where possible when calculating a route Your preferences are automatically saved Tap to return to the previous screen 98 A NAVMAN iCN 700 series Reference Road Types gt 4 gt Select your navigation preferences for the following road types Avoid Warn Toll Roads Unsurfaced Roads Ferry routes Road Types avoid toll roads select the Toll roads check box in the Avoid column receive a warning if your route select the Toll roads check box in the Warn column The warning includes toll roads will display at the start of your trip avoid unsealed roads select the Unsealed roads check box in the Avoid column receive a warning if your route select the Unsealed roads check box in the Warn column The includes unsealed roads warning will display at the start of your trip avoid ferry routes select the Ferry routes check box in the Avoid column receive a warning if your route select the Ferry routes check box in the Warn column The warning includes ferry routes will display at the start of your trip Your preferences are automatically saved Tap to return to the previous screen Driving Alerts M M adi gt iadi gt Driving Alerts
22. not displayed at all house numbers are not available for your selected section of the street Tap Go to Centre of Street to display the Destination Preview screen Go to step c b Use the Keyboard screen to search for the house number of your destination The Destination Preview screen will display Details alk i e ieee rescent Dr neock sima VOCS po ae revert P Destmation Preview 28 ie c Complete one of the following Please ensure that the route preferences are applicable for the route that you have specified before you tap Go If you want to Then calculate the route and open the 3D Map tap Go screen Your route is calculated the 3D Map screen will display select a more precise location by pointing tap the map to switch to the main map view display the geographical details tap Details The Destination Details screen will display save the destination as My Home tap Save The New Favorite screen will display Tap Save as Home save the destination as a Favorite tap Save The New Favorite screen will display Tap Save as Favorite display Route Preferences tap Preferences The Route Calculation screen will display change your destination press K The Destination Search screen will display 29 iCN 700 series How do I go from A to B y NAVMAN How do create a trip with multiple stops You can use the Multi stop Trip Planner screen to set multiple waypoints fo
23. or setting your destination see How do go from A to B on page 23 21 iCN 700 series How do navigate with GPS y NAVMAN How do I navigate with GPS The Global Positioning System GPS is available at any time free of charge and is accurate to within 5m 15ft GPS navigation is made possible by a network of satellites that orbit the Earth at around 20 200km Each satellite transmits a range of signals which are utilized by GPS receivers such as your iCN to determine an exact location Although a GPS receiver can detect signals from up to 12 satellites at any time only four signals are required to provide a position or GPS fix latitude and longitude for vehicle navigation systems Your iCN receives GPS signals via the GPS antenna To guarantee the optimum GPS signal strength ensure your ICN is outdoors or in a vehicle outdoors and the GPS antenna has an unobstructed view of the sky Your iCN can operate in all weather types except snowfall You can view your GPS status at any time from the map screens or the camera screens The GPS icon displays green when a GPS fix is established and red when a GPS fix is unavailable To indicate the reception strength of a GPS fix displays between one and four green quadrants To see your GPS status in more detail see GPS Status on page 102 For more GPS information see the GPS Navigation Frequently Asked Questions guide 22 ie How do go from A to B Y
24. reer eenia eee incest a truce gine aeaee p EEEE e a a O A aaa EE EEE E E E EEEE 46 Next FUE da poor e212 Ie ere pe a EE E E N EAEE EE EEEE E EAS 48 Dir cti n LiSt scree Mercedi aa a a a EE ES 49 Whatit miss atr aa cae a a E E E ah ee E oe ae a een aa 50 How do I save Favorites and My OMe cc ccasdeciennmerten ice uuaaetan idee tant eden enhwrnnetat un de EE EEEE EEEn EEEE Ennn 51 How CO save a Favorite 2 tists Re a tet ttrt EACE ih tN het aie alt Sia deca 51 HOw dol navigate toa Favorite csc itera E E eran e ial E wa aide tua dha aioe lesan 52 How do I navigate to My OMe x35 c ctcbosteetot oral eteccenetonete Mak bo dictacs doch veotibuesanelatel nadGiie kuathteones 53 How do I view details of a FAVOile esas tec snes dere ade eens eee eeea reset Mace Asoc assaennees 54 How do l edit the name of a Favorite ccccccecttcass wiwicces eeeorenndlaasaaeehaedce tien sh ennbaetihceniedetbeas weucaaeeks 55 How d ldeletea Favorite rnn a E E A A 56 POW OO WSS ING camera csan E a E a E EAE EE E R 57 How do I view the Camera screen vse cece sec eee cea ia lte tcl ieee A nl el leek iced atu Ahad a 58 How do ITOK a MOI Oi asus cacceuleaadoshiceneenusniae savessaiinadsasacht incnluse ites a a a a ai 59 How do customize camera preferences cccccececcccecceeeeeeeeeeeeeceeeeeaaaaeaeaeeeeeeeeseaeaeaaaaeeeeeeees 60 How do manage my photos sists tered oh Sh cel ae elu nek a tee an eS eed ates ene em eta att 61 Album TTA STN asst saccade a a
25. the United States and or other countries All rights reserved Location Identifiers 2005 International Air Transport Association All other trademarks and registrations are the property of their respective owners Published in New Zealand Disclaimer Due to continued product development this information may change without notice Navman does not warrant that this document is error free The screenshots and other presentations shown in this User Manual may differ from the actual screens and presentations generated by the actual product All such differences are minor and the actual product will deliver the described functionality as presented in this User Manual in all material respects Compliance WARNING This product its packaging and its components contain chemicals known to the State of California to cause cancer birth defects or reproductive harm This Notice is being provided in accordance with California s Proposition 65 The manufacturer is not responsible for any radio or TV interference caused by unauthorized modifications to this equipment Such modifications could void the user s authority to operate the equipment This device complies with part 15 of the FCC Rules Operation is subject to the following two conditions 1 This device may not cause harmful interference and 2 this device must accept any interference received including interference that may cause undesired operation The software is based in part
26. you have maps from only one country but more than one state installed and selected then the Select State screen will display instead of the Destination Search screen The next time you perform this procedure the Destination Search screen will open as expected If you only have the map of one country installed and selected that country is selected for your destination by default and cannot be changed Go to step 3 a From the Destination Search screen tap Change Country or State The Select Country screen will display Belgie Belgique Citta del Vaticano Danmark Deutschland Espana France lt Select a country b Select a country from the list The Select State screen will display Connecticut New York Rhode Island Select a state If you only have the map of one state installed and selected that state is selected for your destination by default Go to step 3 c From the Select State screen select a state from the list The Destination Search screen will display New York USA Change State Search for City Area Postcode Street Point of Interest Destination Search 25 ICN 700 series How do I go from A to B NAVMAN 3 Search for the city area a From the Destination Search screen tap City Area The Keyboard screen will display ys mN Breezy Point New York Brentwood New York b Use the Keyboard screen to search for the city or
27. 0 Typographical conventions tevenccte cen scolaniestanuennstentdecnaavsseuieGlaceaumatietgies uvekadwntentuGlagvelton uercatcnedecuncatists 11 Getting to know your UG Nit cact Scere aR re ne saat a ts ade ee en AR tec ta 12 FROME COMPONG ALS xscesursi aren ett ccneenn dita a taste Gls a ld Shoes dil E ett eas 12 Side components ss teccre eet tar a eta Vet tc ee eed Meat ed SER recat en acacia ta 13 TOR Components isere sets ueagabcaceGen eutac aan yauemecaue at acca T a 14 BOOM COMPOMCNIS a teeta ds tht tl Nile tn Ral okt les aaa aE a feels chal 14 Back components ich Me ct Setanta cette nie Gia Bets teh a an ee oie aad nei ene Ne 15 VolUME neresine Olas Ak cat ehh cee a Wane tet ce ucact diel E Aea ducts afte 15 internal VAT I oe cst cert ent cata acca ena a ara is a At pects at E Seems E ee Coa 16 PIOW CO GGT SIAC areata tet ws tea a E E E deat mesial a duu lies arial 17 How do UI 1G NGO oo ect canter eee 8 el adee ee ee halal ace hh cat hice aes acti ec lads 19 What are the main screens that will use cc cecctice dense ddaveeaperveek docbeenshs cviaeacuateeneabseewkuddeesabhawenacectuental 20 How do I navigate with GPS 2 xin cs cael Pd aS hee tenet ral eerie bins end alate ee At ac 22 PIOW CO OG from A t0 B e ne ceo ei tia tits a tet leet ted eee teal ease ae el aaa cetlua hdl 23 How do I search for AAC OSS ea aaa clase eee Sessa acech pe tale erage eee eetais 24 Case Study How do search for an addreSs ccccceeeeececeeeaeee
28. 472 USA save as My Home Edit Name 3 To edit the name of the Favorite tap E After you have edited the Favorite name tap OK The Edit Name screen will display 4 Complete one of the following If you want to rename the Favorite tap Save The Favorite is saved The Favorite Preview screen will display save as My Home tap Save as My Home The Favorite is saved as My Home The My Home Preview screen will display 55 iCN 700 series How do save Favorites and My Home A NAVMAN How do delete a Favorite o gt 1 From the My Favorites screen select a Favorite to delete The Favorite Preview screen will display Favonte Preview 2 Tap Delete The Favorite is deleted The My Favorites screen will display 56 How do use the camera Your iCN has an inbuilt camera with NavPix technology which allows you to take photos and save them as a geographical location on the navigation maps This enables you to navigate directly to where the photo was taken Photos can be stored in an Album on the iCN s hard drive or a memory card and viewed in full screen mode In this section How do I view the Camera screen enc s ivaecesssdssiessaiseerncnecuaeds besanseeeerieceeudaanvaepenseenid ne caceudsedectabdowmbunueace 58 How do l takea Photo sennen Rie tee ee re rer acer een ne eee ere eer eee ee ee ree 59 How do manage my photos cciexies cect reccetagaccwewie sewn ase doer pease oetoten
29. ADE GLEN GREEN GRNDS GROVE HARBR HTS HGHLDS HWY HILL HOLLOW ILE IMP ISLAND KEY KNOLL LANDING LN LMTS LINE LINK LKOUT LOOP MALL MANOR MAZE MEADOW MEWS MONTEE MOOR MOUNT MTN ICN 700 series Country Canada Reference a NAVMAN Street Type Abbreviation ORCHARD PARADE PARC PARK PARKWAY PASSAGE PATH PATHWAY PINES PLACE English PLACE French PLATEAU PLAZA POINT PORT PRIVATE PROMENADE QUAY RANG RANGE RIDGE RISE ROAD ROND POINT ROUTE ROW RUE RUELLE RUN SENTIER SQUARE STREET SUBDIVISION TERRACE TERASSE THICKET TOWERS TOWNLINE TRAIL TURNABOUT VALE VIA VIEW VILLAGE VISTA VOIE 120 ORCHARD PARADE PARC PK PKY PASS PATH PTWAY PINES PL PLACE PLAT PLAZA PT PORT PVT PROM QUAY RANG RG RIDGE RISE RD RDPT RTE ROW RUE RLE RUN SENT SQ ST SUBDIV TERR TSSE THICK TOWERS TLINE TRAIL TRNABT VALE VIA VIEW VILLGE VISTA VOIE en NAVMAN ICN 700 series Reference Canada 121 Points of Interest categories icon Deserntion leon pesen EL a e eww a lt wWe a pem fa poseen ope m eme ape p pe aee e e a porma a pe Fe e oere o pee ae we m prow me C a m pe O C e ommrmme apem a p oo oo ape p poen apm m peoo opes W pe D prere a e o 122 icon Deserntion leon Deseipton EL frm e Femme IE from Peewee frie S a 5 e a 123
30. AN 2 Select the country and state If this is the first time you are setting your destination and you have maps from only one country but more than one state installed and selected then the Select State screen will display instead of the Destination Search screen The next time you perform this procedure the Destination Search screen will open as expected If you only have the map of one country installed and selected that country is selected for your destination by default and cannot be changed Go to step 3 a From the Destination Search screen tap Change Country or State The Select Country screen will display Belgie Belgique Citta del Vaticano Danmark Deutschland Espana France lt Select a country b Select a country from the list The Select State screen will display Connecticut New York Rhode Island Select a state If you only have the map of one state installed and selected that state is selected for your destination by default Go to step 3 c From the Select State screen select a state from the list The Destination Search screen will display Change State Search for City Area Postcode Street Paint of Interest Destination Search 32 A NAVMAN iCN 700 series 3 Search for the city area a From the Destination Search screen tap City Area The Keyboard screen will display Breezy Point New York Brentwood New York b Use the
31. AVE wav sound file from your local or network drive Once you have located the sound file select it and click Open delete a sound file select the sound file from the list and click play a sound file select the sound file from the list and click 3 Click OK to save your list of sound files and close the My Sounds Admin window How do delete a Custom POI File from my ICN Map Points of Interest 1 Click Ea The Manage POI Files window will open displaying a list of custom POI files installed on your iCN 2 Click the File Name or Size of the POI file to delete 3 Click Delete The file is removed from the list but is not yet deleted 4 To select another file to delete go back to step 2 otherwise continue to step 5 5 Click OK and accept the changes The selected file or files are deleted 94 y NAVMAN iCN 700 series How do I install Custom Points of Interest How do I backup my ICN You can save backups of the following information and later restore them to your iCN Favorites and My Home Preferences including Point of Interest and photo preferences Multi stop trips m Recent locations How do Backup my ICN 1 Onthe File menu select Backup The Backup Restore window will open 2 Click New Backup The New Backup window will display 3 Click OK The New Backup window will close and your backup will be saved to your computer The backup will be listed on t
32. ActiveSync search for ActiveSync at www microsoft com How do install ActiveSync on my computer Microsoft ActiveSync is automatically installed on your computer when you install SmartST Desktop For more information see How do install SmartST Desktop on my computer on page 80 If you will not be installing SmartST Desktop on your computer you can install ActiveSync 3 7 1 by completing the following 1 Close all open programs on your computer 2 Insert the SmartST Application Installer CD into your computer CD drive The SmartST Desktop installer will start If your computer does not automatically launch the CD start the installation manually Start gt Run Type D Install exe where D is the letter assigned to your CD drive then click OK 65 iCN 700 series Howdolusethecamera NAVMAN 3 Select your preferred language for SmartSI Desktop 4 Click Install Microsoft ActiveSync and follow the screen prompts How do copy photos from my ICN to my computer via the USB cable CAUTION Ensure that Microsoft ActiveSync is installed on your computer before connecting the USB cable to your computer 1 Plug the large end of the USB cable directly into a USB port on your computer not a USB hub plug the small end into the USB Socket on the side of your iCN Where possible plug the USB cable into a USB port at the back of your computer 2 Plug the small end of the AC Power Pack cable into the so
33. ICN 700 series Reference Specifications Specifications General Operating voltage DC5V Operating voltage range DC10 8 16 0V Maximum operation current 2 5A Grounding system car battery negative pole AC adapter Operating voltage range AC85 265V Maximum operation current 2 5A Car adapter Operating voltage DC12V Operating voltage range DC8 24V Maximum operation current 2 5A TFT monitor Screen diagonal 4 inches 105mm Usable display area 87 84mm W x 49 8mm H Resolution WQVGA 480 W x 272 H pixels Brightness 180cd m center brightness after 30 minutes Top viewing angle 58 Bottom viewing angle 52 Horizontal viewing angle 66 Dimensions Dimensions 136mm W x 77mm H x 32mm D Net weight 300g h NAVMAN Remote control Frequency range 2 4 2 483GHz Nominal output power 0 dBm Modulation FSK Camera Effective Pixels 1 3 M Resolution 1304 x 968 SXGA Aperture range F 4 9mm Battery Capacity 1850mAH iCN 720 Capacity 1890mAH iCN 750 Type Lithium ion Hardware Processor Intel PXA270 312Mhz RAM 64MB ROM 64MB Internal CF card 512MB iCN 720 HDD 4GB iCN 750 SD MMC Memory Expansion Environment Operating temperature 10 C 60 C Storage temperature 30 C 70 C Operating humidity 45 80 RH Storage humidity 30 90 RH EMC e Mark FCC CE C Tick RSS 210 Operating shock 4G Non operating shock 75G 124 h l NA
34. Keyboard screen to search for the city or area of your destination The Destination Search screen will display Go to Centre of City Area Search for Street Point of Interest Destination Search 4 Search for the street a From the Destination Search screen tap Street The Keyboard screen will display Crescent Dr Brentwood Crescent Pl Brentwood a b d I Oo i 33 How do go from A to B b E 5 a b Use the Keyboard screen to search for the street of your destination The Destination Search screen will display Brentwood New York Go to Center of Street c earch for Intersection House Humber Destination Search If house numbers and intersection information are not available for your selected street the Waypoint Preview screen will display Go to step 5b Search for the house number From the Destination Search screen tap House Number The Keyboard screen will display E Pe ti ti lt S S Z Crescent Dr Brentwood a a ha If the House Number option is not displayed house numbers are not available for your selected street To display the Destination Preview screen tap Go to centre of street Go to step c 20 28 Crescent Dr Brentwood 3 6 Use the Keyboard screen to search for the house number of your destination The Waypoint Preview screen will display Cheney Se oy ert j fi on we Crandall Ave x a A
35. Microsoft ActiveSync is used to establish a connection between your iCN and your computer ActiveSync 3 7 1 will be installed on your computer if a later version of ActiveSync is not already installed as part of the installation of SmartST Desktop After it is installed ActiveSync will run in the Windows System Tray Notification Area when you start Windows ActiveSync will activate when your iCN is connected to your computer For more information on ActiveSync search for ActiveSync at www microsoft com How do install a map for the first time The most common task performed using SmartST Desktop is the installation of a new map to your iCN internal memory or memory card Complete the following procedures Install SmartST Desktop on your computer see How do install SmartST Desktop on my computer on page 80 2 Check for software updates for SmartSI on your iCN see How do keep SmartST up to date on page 84 Install one or more maps on your ICN see How do install maps on my iCN on page 85 79 ICN 700 series What is SmartST Desktop N NAVMAN How do install SmartSI Desktop on my computer i Before you Begin Ensure that your computer meets the minimum system requirements for SmartST Desktop especially i Ensure that Internet Explorer 6 or higher is installed on your computer before you install SmartST Desktop even if it is not your default browser ii Windows XP users ensure that Wi
36. VMAN ICN 700 series Support information Support information Support for Australia Navman Australia Pty Ltd PO Box 479 Gladesville NSW 2111 Australia Support http support navman com Website http www navman com Support for New Zealand Navman New Zealand PO Box 68 155 Newton Auckland New Zealand Support http support navman com Website http www navman com Support for Europe Navman Europe Ltd 4G Gatwick House Peeks Brook Lane Horley Surrey RH6 9ST United Kingdom Support http support navman com Website http www navman com Support for US and Canada Navman USA Inc 5275 Capital Boulevard Raleigh NC 27616 2925 United States of America Phone 866 9 NAVMAN Support http support navman com Website http www navman com 125 ee iCN 700 series Notes NAVMAN Notes 126 JN NAVMAN
37. ard slot and Drive Away For more information see How do use a memory card with my iCN on page 112 Which map should install If you are not sure which map contains the town or city that you want to install you can use the Find City window to identify the correct map For more information see How do know which map contains a particular city or town on page 88 How do install maps from CD 1 Open SmartST Desktop if it is not already open Start gt All Programs gt Navman gt SmartST Desktop 2006 2 Insert a SmartST Map CD into your computer CD drive The preactivated maps that are ready to be installed to your iCN are light green The maps on the CD that require activation before being installed to your iCN are If your computer opens Windows Explorer when the CD is inserted close the Windows Explorer window 85 iCN 700 series What is SmartST Desktop A NAVMAN 3 Complete the following Then the map needs to be activated via the Internet before it can be installed continue to step 4 4 If you connect to the Internet via a dial up connection connect to the Internet now 5 Follow the prompts to activate your Map Product Key including Enter the Map Product Key from the back of the enclosed CD box when prompted 6 Click the map you want to install to your iCN The map will change colour to dark green to indicate it has been selected The map is now listed in the Review S
38. aved as a Favourite destination you will not delete the Favourite if you subsequently remove the photo from your Album 1 From the Album screen select the Album you want to view 2 Tap and hold then drag across the screen to select the photos you want to delete As a photo is selected a red border will appear around it 3 To cancel a selection tap and drag across the photo again 4 When you have finished the selection tap Delete 5 A warning screen will display asking you to confirm or cancel the procedure If confirmed the photos will be deleted from the Album You can also delete a single photo from the Photo Details screen For more information see Photo management on page 63 62 i gt Photo management The Photo Details screen displays information about your photo To display the Photo Details screen tap any photo in your Album Go to Assign Copy Delete 8 90 Displays the Destination Preview screen ready for you to navigate to the location The Go To button is only available if GPS co ordinates are associated with the photo Allows you to assign a photo to an existing Favourite or create a new Favourite if GPS co ordinates are associated with the photo Copies a photo from the hard drive to your memory card and vice versa rete Deletes a photo from the hard drive or your memory card Photo Title The title of the photo tap Edit to add a title or edit the
39. avman server to check for software updates 3 Ifa software update is available complete the following a Click Update available The Navman website will open b Select the update for your region and download it to your computer c Onthe Setup menu select Update software then Update software on iCN Follow the prompts to update your iCN software Can automatically check for software updates To configure SmartST Desktop to automatically check the Navman server for software updates from the Setup menu select Update software then Automatically check for software updates If a software update is available complete step 3 above How do upgrade from a previous version of SmartSI Follow the instructions in the nstallation Guide or Upgrade Guide that came with your SmartST upgrade 84 2 NAVMAN iCN 700 series What is SmartST Desktop How do I install maps on my ICN Your iCN comes with one or more pre activated maps You can install maps from the enclosed CDs to memory card or your iCN internal hard drive however you may first need to purchase a Map Product Key to activate the maps For detailed information on your model of iCN and whether you require a Map Product Key see Which maps are already installed on my iCN on page 111 How do I use preactivated memory cards Preactivated maps are also available for purchase separately on memory card To use a preactivated memory card insert the card in the Memory C
40. cheme iCN 700 series Reference NAVMAN meen Peevey m Options to control measurement of time position and distance Screen Display gt gt Q gt gt gt gt Touch Screen Alignment Align Screen Display Complete the following change the screen brightness move the Screen Brightness slider towards Bright to increase screen brightness move the Screen Brightness slider towards Dim to decrease screen brightness Warning The iCN can heat up when the Brightness scale is set above 70 i e when more than seven rectangles are coloured therefore use lower brightness whenever acceptable The screen brightness can also be adjusted using the remote control may be sold separately align the touch screen tap Align and follow the prompts E The prompts are available in English only Your preferences are automatically saved Tap to return to the previous screen 106 2 NAVMAN iCN 700 series Reference Map Display gt B gt Q gt Map Colour Scheme ry O Day hues Night hues Default Map Presentation Auto zoom on Main Map screens a Keep North at top of 7D Map screen al show no entry road signs 4 Map Display Complete the following change the color scheme change the color scheme color scheme select your preferred scheme from the Map Colour Scheme box _ your select your preferred scheme from the Map Colour Scheme box _ sch
41. cket on the side of your iCN plug the other end into the mains 3 If your iCN is turned off press Your iCN will turn on 4 When the following screen displays on your iCN click Next Microsoft ActiveSync will synchronize with your iCN Ir 5 In the Microsoft ActiveSync window click Ey Windows Explorer will open displaying the contents of your iCN CAUTION Do not delete move or edit any files on your iCN other than photos as it may prevent your iCN from functioning properly 6 Open the following folder to display a list of your photos My Documents gt My Pictures You cannot view or preview photos until they have been copied to your computer 7 Copy the photos in the My Pictures folder to your computer You can now view e mail or print the photos When the photos have been successfully copied to your computer it is then safe to delete the photos from your iCN My Pictures folder 66 How do I navigate to a photo location bi To navigate to a photo location a GPS fix must have been available when the photo was taken gt B 1 From the Album screen tap a photo The Photo Details screen will display 2 From the Photo Details screen tap Go to The Destination Preview screen will display Frl T i Se i ifs Maple Closes ff gak Rd F 4 Hawthorn Rett Chestrut Close a P 1 x L 2 a r f i T j 7 r j 5 x Hazel Rdl Destination Preview 3 Complete the following sav
42. cking Y 92 3 2 NAVMAN iCN 700 series How do I install Custom Points of Interest Modify the POI settings as required If you want to edit the POI category name type the name of the POI category in the POI Name field The file name cannot include spaces The category name will consist of the first 8 characters activate the POI to enable proximity select the Active check box warnings If you do not activate the POI you will not be able to configure the Alert settings enable a visual warning when a POI of this select the Visual Alert check box category is in close proximity enable a warning sound when a POI of this select the Audio Alert check box category is in close proximity change the units used to measure distance select either the Metric or Imperial option for this POI category select the distance from a POI of this select the distance from the Distance box category at which the visual warning should display or the warning chime should sound indicate the priority of a POI of this move the POI Visibility Level slider left for lower priority or category when one or more additional right for higher priority POls are in the same vicinity select an icon to display on the map type the path to the icon file to be used to represent the POI screens for POls of this category type in the Icon File box or click Browse to select the icon file from your local or network drive Once you have located t
43. e colour theme you are using To view zoom options tap To display a smaller area in greater detail tap or scroll down To display a larger area in less detail tap or scroll up Compass and GPS Displays one of the following options Information Green Quadrants A valid GPS signal is being used to fix your position displays between one and four quadrants to indicate the strength of the signal Red Circle No signal Compass heading Tap to cycle through the options tap and hold to display the GPS Status screen 47 Next Turn screen The Next Turn screen displays information that you need for the next turn the direction of the turn and the distance to the turn A route must first have been calculated for this screen to be available To view the Next Turn screen when a route has been calculated press to cycle through the screens Right Willoughby St 0 4 all Flatbush Avenue Ext Gold StH a Willoughby St t 1100 c 459 Albee Sq W iem peseto Next instruction The direction and name of the street to turn in to GOO QO When you cycle through the Information options a function description will display briefly at the top of the screen Direction of next turn The direction of your next turn o Distance to next turn The distance to your next turn 5 Status Bar Displays one of the following The name of the street you are located on 7 Speed warning
44. e Saved Information Delete Recent Locations Delete Favonte Destinations Delete Avoid Areas Preferences Restore Factory Defaults Saved Information Complete the following If you want to Then tap Delete Recent Locations delete Favorites tap Delete Favorite Destinations delete avoid areas tap Delete Avoid Areas restore factory default settings tap Restore Factory Defaults When the warning dialog box displays tap Yes Tap to return to the previous screen 104 A NAVMAN iCN 700 series Reference Start up gt B gt O gt At Start up Show the Tutonal F Show the Language Selection screen Complete the following If you want to Then show the Tutorial when you turn select the Show the Tutorial checkbox on your iCN show the Language Selection select the Show the Language Selection screen checkbox screen when you turn on your ICN Your preferences are automatically saved Tap to return to the previous screen Display Preferences You can enhance your navigation experience by modifying aspects of the way that your iCN displays information The Display Preferences menu is shown below and is accessed by tapping on the Preferences menu i ji lt i Screen Map Display Measurements Display Preferences dB Options to control the screen brightness and touch screen alignment z CE CE Options to control the general map presentation and colour s
45. e a photo as a Favorite or as My Home tap Save the New Favorite screen will display tap E3 The Keyboard screen will display Enter a name for your Favorite or My Home then tap OK to create a new My Home destination tap Save as Home to create a new Favorite destination tap Save as Favourite Photos can only be saved as destinations if the GPS co ordinate information was available when the photo was taken 67 How do I assign a photo to a Favorite When a photo is assigned to an existing Favorite only the image and not the image co ordinates are associated with the Favorite gt B 1 From the Album screen tap a photo The Photo Details screen will display 2 From the Photo Details screen tap Assign The Assign Photo screen will display Nice view Hice view A new favourite Assign Photo 3 Complete the following If you want to assign a photo to an existing Favorite tap B4 and select a Favorite destination from the list location The Favorite title will display tap Save The photo is assigned to the Favorite and the Photo Details screen will display create a new Favorite when GPS co tap Ka and select A new favorite from the list ordinates are associated with a photo tap E The Keyboard screen will display Enter a name for your Favorite then tap OK tap Save The photo is saved as a new Favorite and the Photo Details screen will display 68 A NAVMAN iCN 700 series
46. earch for a landmark or venue on page 37 Add To Trip Adds the location to your multi stop trip Set As Start Location Sets the location as your departure point Only available when navigating a route Displays the Route sub menu from which you can Detour Detours your route to avoid the next 1 2 5 10 or 20 kilometers or the next 1 2 5 10 or 20 miles Demonstrate Starts the route demonstration demonstrating navigation from your current position or departure point Stop Demonstration Stops the route demonstration Skip Waypoint Skips the next stop on your multi stop trip Show Entire Route Displays your entire route on the 2D Map screen Show Summary Displays a summary of your route including your departure and destination addresses total distance and total estimated time to your destination 72 i gt How do I avoid an area Your iCN can calculate a route that avoids a specified area on the map Up to ten Avoid Areas can be added Avoid Areas are displayed as shaded areas Links Or 5 230 NYI9A CAUTION If no alternative route around an Avoid Area exists the route calculation will fail CAUTION If your destination is in an Avoid Area you will be routed into that Avoid Area How do I add an Avoid Area 1 Tap and hold the map to display the Map menu 2 Select Add Avoid Area 3 Tap and drag to set the Avoid Area to the correct size and position The Avoid Area is added How do I de
47. eceeaeaucuececueaececuecesecuececueaeseceeceseeaeneenenes 37 23 How do search for an address Select a destination using the Destination Search Keyboard and Destination Preview screens which used together form an address entry wizard This section describes how to use each of these screens and provides a case study to help guide you through setting your destination Quick Steps Open the Destination Search screen Select the country and state Search for the city area Search for the street Search for the house number oS a we NY Tap Go Case Study How do I search for an address This case study will show you how to set your destination by selecting your country then state then town or city then street then house number 1 Open the Destination Search screen Change State Search for City Area Postcode Street Point of Interest Destination Search The Destination Search screen will display If this is the first time you are setting your destination and you have maps from more than one country installed and selected then the Select Country screen will display instead of the Destination Search screen Go directly to step 2b The next time you perform this procedure the Destination Search screen will open as expected 24 2 NAVMAN iCN 700 series How do go from A to B 2 Select the country and state If this is the first time you are setting your destination and
48. eed aha Cate deh hl cece cal E eat cee eaters 61 Photo Management 4 5 5h cyl t e Laie aaa e e S aea do E aeaa utes 63 How do I save e mail or print PNOLOS 7x ce eccsces coerce uwcdatec vance ccunteeser deh ct ica tei leek ae uel alec eed 65 Via Memo CAR vucledacuseascusshiuecencbennrdsebicadaasvancauaneniecaaksaaaightarencanvaseadssususcgatosancdusOutedaaeedientyesuen 65 Via USB Cable sat e nnn rete emer re arnt E eR Ean ea are Ri atm arene nn ae manne A tle meenee ner naw 65 How do I navigate to a photo location whats ditantap ced aaha er hadith heed ae 67 How do assign a photo to a Favorite sen tte cte tate etes desarmeneeaca toe iatatia deh kines fh ieana 68 What else can Ido oies n E anand E E den uta pases dteeettng nce ae eerste hs eae dele tach 69 How do I navigate to a recent location xc tase diction teceueeranetnnatut eeenhnuelaneruntaene bunch deiaarntteiuy teaeyaetas 70 How do l use the Map Menu cnc Willie feet cnainc cade ttnctnttan vest gush adet ce csas ino wisn tomenrasitn sda teenete 71 How do lavoidamarea e mnr ee an REI e TOS at cer eR errr Aven SCRE A i Petre ORR REI nr Poe en eee ree 73 PIOW dO i preview a route cces ict Career reece a a Settee alent coeliac uastatt cuca die dd bons 74 How do I view my route statistics oss csecconeeteccut sus veek seeaslan Une causa uecaniau Se uaetebiweashs ales veeseinecent dewey See nauees 76 How do I view statistics on my current route c 2csrcenctichvne td teueeebnecenadusgeencabvvuant
49. eeeeeeeeeeeeseeeeeaaaaaaaeeeeeeeeeeeaaas 24 Using the Keyboard screen cs cin ceca oie lac ns Sets tena tecna damascene te ce aeh eines ean cae eect ay tt ta at 27 Using the Destination Search SChOSIN cxsccessossenssesshisacaaesananesagutascaxsacesice neces san dnanexagcnsncesuaeanaayunines 27 How do create a trip with multiple StOPS cece cece cece eeeeee eee e ence ce eeae ae aaeaeaeeeeeeeeseaeaeaaaaeeeeeeeees 30 Case Study How do navigate to multiple addresses cccccsseeeeeeeeceeeeeeeeeseeaeeeeeeeeaaeeeeeeeeas 31 How do skip a waypoint during a Multi StOP trip cece cece eee ee cece cece ee ee eeeeeeeeeeeeeeseaeaaeaenneeeeeeees 36 How do search for a landmark or VONUe c ccccee cece cece ee eeeeeeee teense ee ceeeaaaaaaeeeeeeeeeseaeaeaaaaaeeteees 37 How do l find the nearest gas Slaton 22 sconviaseiagsiiancckicactdasautacsanuacecdceuecs cas ydaanees ene dcesyuaaientuiatae 37 How do find the nearest parking area ccceecee cee eee ee eeeeeeeeeeeeeeceeeeeaaaaaaeaeeeeeeeeseaeaeaaaaaeeeeeees 38 How do I search for other POMS otot oka ite tet eile eal Ul Seoul acelk a eck made hia 39 Case Study How do search for a Point of Interest ce cccccsseseeeececeeseeeeeeseeeseeeeeesssaaseeeeees 39 How dolview my route cene tare tas a Doe ciated Geeta A SN nel 43 SD MAP SCVCC I rensei tiene tdueeta set ental a a N ato tale Cottaet al tite R tinea tere A EEEE E 44 2D Map Screem crural
50. elected Maps section of the Add Maps tab To deselect a map click the map again You may need to install multiple maps to cover the desired geographical area 86 2 NAVMAN iCN 700 series What is SmartST Desktop 7 Complete the following If you want to Then select a map the map needs to be activated via the Internet before it can be installed go back to step 4 select a Major Road Network map select the check box in the Step 1 Select Maps section For information on Major Road Network maps see What is a Major Road Network map on page 89 install the selected maps to your iCN continue to step 8 8 Inthe Step 3 Install Maps section select the destination media for the selected maps for example memory card or iCN internal memory 9 Click Install Maps When they have been installed the map or maps will change colour to yellow 10 To use your iCN disconnect the USB cable WARNING Do not disconnect the USB cable from the iCN USB Socket until the Globe has refreshed and the installed map or maps have changed colour to yellow How do remove maps from my ICN 1 Open SmartST Desktop if it is not already open Start gt All Programs gt Navman gt SmartST Desktop 2006 2 Click the View Remove Tabs tab The View Remove tab will open displaying a list of installed maps 3 Select the name from the list of the map that you want to remove then click Remove 4 Confirm that you want t
51. eme from the Map Colour Scheme box improve screen contrast in light or select either the Day hues or the Night hues option dark conditions enable automatic zooming during select the Auto zoom on Main Map screens check box If selected navigation the 3D Map and 2D Map screens will automatically zoom in or out depending on your speed to allow optimal route viewing display North at the top of the 2D select the Keep North at top of 2D Map screen check box Map screen display no entry icons on no select the Show no entry road signs check box entry roads on the 2D Map and 3D Map screens Your preferences are automatically saved Tap to return to the previous screen Measurements gt B gt Q gt amp Position Format O Decimal degrees Degrees minutes and seconds Time Format C 12 hour OFT Distance Units Imperial miles and yards Measurements 107 iCN 700 series Reference NAVMAN Complete the following If you want to Then change the Position Format select either the Decimal degrees or the Degrees minutes and seconds option change the local time offset select either the 12 hour or 24 hour option for time format change the distance units select your preferred distance units measurement from the Distance Units box Your preferences are automatically saved Tap to return to the previous screen POI Preferences You can enhance your navigation exper
52. en tap 123 To display the alternate Keyboard screen tap alt To display the alphabet Keyboard screen tap abc Using the Destination Search screen As you specify each part of the address it will display at the top of the screen The available options will change to reflect the parts of the address still to be completed Crescent Dr Brentwood Hew York USA Go to Center of Street Search for Intersection House Number Destination Search 27 iCN 700 series How do go from A to B y NAVMAN b Use the Keyboard screen to search for the street of your destination Where there are multiple matches select the city or area that best describes your destination The Destination Search screen will display Crescent Or Brentwood Hew York Go to Center of Street Search for Intersection House Humber Destination Search If house numbers and intersection information are not available for your selected street the Destination Preview screen will display Go to step 5c E 5 Search for the house number a From the Destination Search screen tap House Number The Keyboard screen will display Z Crescant Dr Brentwood 20 28 Crescent Dr Brentwood t Pe p 4 65 6 7 9 E 0 lt If house numbers are available but not the one that you require you may have to choose the same street in a neighbouring area Go to step 4 If the House Number option is
53. ent ir Museum TY Nightlife PF Open Parking Area lt Select POI Category b Select a POI type from the list The Keyboard screen will display Select a point of interest T CARVER FEDERAL SAVINGS BANK CHASE MANHATTAN BANK Addisl c Use the Keyboard screen to find the POI The Destination Preview screen will display Details Save Prefs Go Destination Preview 41 How do go from A to B iCN 700 series How do I go from A to B A NAVMAN d Complete one of the following W Please ensure that the route preferences are applicable for the route that you have specified before you tap Go If you want to Then calculate the route and open the 3D Map tap Go screen Your route is calculated the 3D Map screen will display select a more precise location by pointing tap the map to switch to the main map view display the geographical details tap Details The Destination Details screen will display save the destination as My Home tap Save The New Favorite screen will display Tap Save as Home save the destination as a Favorite tap Save The New Favorite screen will display Tap Save as Favorite display Route Preferences tap Preferences The Route Calculation screen will display change your destination press K The Destination Search screen will display 42 How dol view my route Once a route has been calculated the 3D Map screen will display
54. er you have entered a name for the Favorite tap OK The New Favorite screen will display 51 i gt iCN 700 series How do I save Favorites and My Home y NAVMAN 3 Complete one of the following If you want to save as a Favorite tap Save as Favorite The Favorite is saved The Favorite Preview screen will display save as My Home tap Save as My Home The Favorite is saved as My Home The My Home Preview screen will display How do I navigate to a Favorite 9 gt O 1 Tap the Favorite destination you want to travel to The Favorite Preview screen will display TE Details Rosedale Awe i N Edt ar AAW Delete Prefs Go a Favonte Preview 2 Tap Go The route is calculated and displayed on the Map screen 52 gt How do I navigate to My Home If you have not set an address as My Home the first time you try to navigate to My Home you will be prompted to search for an address using the address entry wizard Option 1 From the Go To Menu gt The route is calculated and displayed on the Map screen Option 2 From the Favorite Destinations screen gt 1 From the My Favorites screen select My Home The My Home Preview screen will display i Details Edit Eit Delete Delete Prefs Go My Home Preview 2 To navigate to My Home tap Go The route is calculated and displayed on the Map screen Option 3 Using
55. existing title eok peee taken O A thumbnail of the photo Tap to display the photo in full screen O pe ereenn snaran er oo Allows you to create a title for a photo using the Keyboard screen Time Date and Displays the time and date the photo was taken also displays the latitude Location Co ordinates and longitude co ordinates if GPS co ordinates are associated with the photo 63 How do I view a photo in full screen 1 From the Photo Details screen tap the thumbnail of the photo The photo will appear in full screen 2 Complete the following If you want to Then rotate the photo tap The photo will rotate 90 degrees counterclockwise each time is tapped the photo is saved at the new angle view parts of the photo not displayed on tap and hold the image then drag across the screen screen How do create a title for a photo A title can be given to your photo or an existing title can be renamed The title can be a maximum of 34 characters 1 From the Photo Details screen tap Edit The Edit Description screen will display 2 Tap each character as required The title will appear at the top of the screen Edit Descnption 3 When the title is complete tap OK The Photo Details screen will display with the new title under the photo 64 A NAVMAN iCN 700 series How do I use the camera How do save e mail or print photos To save e mail or print photos you mus
56. f lighting options will display Setting Description For outdoor use in bright sunlight For outdoor use with cloud cover O poe Q peneem 3 Tap your preferred lighting option Your selection will be saved Brightness options The brightness control is adjustable to one of six levels 1 To view the Camera screen press 2 From the Camera screen tap O The range of brightness options will display O O O 3 Select one of the six levels to set the brightness of a photo 60 A NAVMAN iCN 700 series How do I use the camera How do I manage my photos Album management The Album stores all your photos and displays them as thumbnails You can store photos in the A bum on the iCN s hard drive or on your memory card When you take a photo it is always saved to the Album on the iCN s hard drive 1 Press to view the Camera screen 2 From the Camera screen tap The Album screen will display Q N2 o 6 Om Displays the Album on the hard drive D Displays the Album on the memory card Optional Copies photos from the hard drive to the memory card or vice versa Deletes photos from the hard drive or memory card Tap to return to the Viewfinder Displays photos in the photo album on the hard drive or memory card Tap to display Photo Details screen Scrollbar Allows you to scroll through thumbnail view of photos A Displays if GPS co ordinates are associated with a photo 61 H
57. he Backup window 4 Close the Backup Restore window How do I Restore a Backup to my ICN 1 On the File menu select Restore The Backup Restore window will open 2 Select the backup from the list then click Restore The backup will be restored to your iCN 3 Close the Backup Restore window How do I Delete a Backup 1 Onthe File menu select Backup The Backup Restore window will open 2 Select from the list the backup to delete 3 Click Delete then click OK The backup is deleted 4 Close the Backup Restore window 95 ee ICN 700 series Reference Reference In this section What can E CUSTOM ZG ee ice cia tas Be care ha Pas a e tatters ue dae cla die ea de tenner radu altematies 97 Which maps are already installed On My ION 0 ce cece ee cece eee eeeee eee e ee eeeeeeaeeaaaaaeeeeeeeeseseaeaeaaaaaeeeeeeees 111 How do use a memory card with my ION 000 eee cece cece ee cece ae ee eee eee eeeee ee eaaeaaeaaaaaaeeeeeeeeseaeaeaaaaaees 112 Street types US tierie seers ere RR te PER E ptr ee eee eee er ee Pee rere errr eter ree ea ree 114 Streettyp s Ganada ainiin EE EEEE tar Pe eet a eee cee ee aa et EEES ree ray 118 POINTS OF INTEKEST categories erd aeeie n eierne Cnc a EER EE E EEA T sald SE Ena 122 ne 0 5761 ers 1110 ALETE a AEEA E EESE EAE EE EAN AE E EEA N E EN AE E EE 124 96 NAVMAN A NAVMAN iCN 700 series Reference What can customize There are a number of d
58. he icon file select it and click Open The icon file must be a bitmap bmp graphic with a minimum size of 6x6 pixels and a maximum size of 32x32 pixels If you do not select a custom icon a default icon will display select a custom sound alert file to play select a sound file from the list when a POI of this category is in close proximity The list of sounds is formed from default sound files and sound files that you have added using My Sounds Admin For more information see How do add sound files to My Sounds Admin on page 94 Click to include a WAVE wav sound file from your computer or network Click to play the selected sound file If you do not select a custom sound file a default sound alert will play Click OK to save the POI settings The Copy POIs window will open Select the destination media for the selected maps for example memory card or iCN internal memory then click Copy POI The POI file is saved to the iCN or memory card as a POI category 93 iCN 700 series How do I install Custom Points of Interest 2 NAVMAN How do add sound files to My Sounds Admin My Sounds Admin is used to compile a list of sound files for you to select an audible alert from when editing the POI file options Map Points of Interest 1 Click The My Sounds Admin window will open 2 Add delete or play sound files as required If you want to add a sound file click to select a W
59. he safe operation of the vehicle the deployment of air bags or other safety equipment Do not operate the iCN while driving Before you use your iCN for the first time familiarize yourself with your device and its operation On main roads the distance to an exit calculated by the iCN may be further than the distance shown on road signs Road signs show the distance to the start of an exit while your iCN shows the distance to the next intersection i e the end of the exit ramp or road To prepare to exit a road always follow distance information on road signs iCN 700 series Important safety information NAVMAN Do not handle the iCN while it is hot Let the product cool out of direct sunlight Do not expose the iCN to direct sunlight in an unattended vehicle for prolonged periods Overheating may damage the unit To discourage theft do not leave the iCN mounting bracket or any cables in plain view in an unattended vehicle Failure to adhere to these warnings and cautions may lead to death serious injury or property damage Navman disclaims all liability for installation or use of the iCN that causes or contributes to death injury or property damage or that violates any law A NAVMAN iCN 700 series Contents Contents IIMPOMANESATSLY IntormatON seres eeren e duck Siaased aE E E RAE Ea ERR E ded 5 Welcome s inses a a a sh cnet tcc E er emda E nc E a a E a Te dela tease 9 BOX CONTENTS ooi re a EEEE E ictal E AE E A E E 1
60. her end into the mains 80 2 NAVMAN ICN 700 series What is SmartST Desktop Press Your iCN will turn on When the following screen displays on your iCN click Next Microsoft ActiveSync will synchronize with your iCN You are now ready to use SmartST Desktop to install maps to your iCN SmartS I Desktop features Once SmartSI Desktop has been installed on your computer you can access it from the Windows Start menu Start gt All Programs gt Navman gt SmartST Desktop 2006 ae eS ee ma fee mm f A i A A S d rar J draie ap laksa Fn phages kaien is lid omen cae Hartt Hig Er E Fli HTa Pes EE U E Pg T bep Basena fs 9 2 i cag h ras unanas nam Ja merasim eas Barh Ba feed iol it Br aiee papa Cho m ts Cl be E fees lanma E p bm r viim Emp oe eee raa 7 i O oo i ia PE HO BS FPH et E En ms 81 iCN 700 series What is SmartST Desktop y NAVMAN omr Menus that provide access to SmartST Desktop functionality Toolbars There are three toolbars Status Globe Cursor To display toolbars that are not on by default select Toolbars on the View menu For more information see Toolbars on page 83 Add Maps and Follow the steps on the Add Maps tab to install maps to your iCN View Remove Maps memory card or memory card via a memory card reader For more tabs information see How do install maps on my iCN on page 85 Follow the steps on the View Remove Maps tab to rem
61. highlighted The distance to your next turn Your next turn is highlighted Instruction The direction and name of the street to turn in to Your next turn is highlighted Next turn highlighted Your next turn is highlighted at the top of the list Upcoming turns The direction and distance of upcoming turns 49 iCN 700 series How do view my route GNAMAN Sess The name of the street you are located on 7 Information Displays one of the following options Time km h or mph Speed TTG Time to Go DTG Distance to Go ETA Estimated Time of Arrival Tap to cycle through the options appear as Time to Waypoint Distance to Waypoint and ETA at O WAPE O O OOO O OOO OOOO E During a Multi trip journey Time to Go Distance to Go and ETA will Position Indicator Displays your position in the Direction List screen o Cancel Route Cancels your current route Scroll Bar Allows you to view each turn by scrolling through the list Compass and GPS Displays one of the following options Information Green Quadrants A valid GPS signal is being used to fix your position displays between one and four quadrants to indicate the strength of the signal Red Circle No signal Compass heading Tap to cycle through the options tap and hold to display the GPS Status screen O if miss a turn Back On Track Automatic Rerouting Your route is re directed if you make a wrong turn
62. ield the BATTERY switch is ON E The BATTERY switch is GREEN when ON and RED when OFF b Press to turn your iCN on The iCN will turn on and display the Language screen If your iCN was last turned OFF via the BATTERY switch it will automatically turn on when the BATTERY switch is switched ON If you have maps installed from multiple continents you may be prompted to select the maps you would like to load before the Language screen is displayed To use maps from a different continent at a later time you must first reset your iCN then select a different continent 2 Select your preferred language From the Language screen tap your preferred language Dansk Espa ol Deutsch B Francais ae English AUS tc ba Ta Lik j HE English UK mee Nederlands English US a Svenska Show on startup Select Language To prevent the Language screen from displaying on each startup tap the Show on startup check box You can change your preferred language while using your iCN For more information see Language on page 103 3 Accept the warning message a The Warning screen will display when you have selected your preferred language Read the Warning message b To confirm that you have read and understood the message tap Accept The Tutorial will display 4 View the Tutorial When you have accepted the Warning message the Tutorial will display Read the Tutorial To preven
63. ience by modifying aspects of the way that your iCN displays and manages POIs The POI Menu is shown below and is accessed by tapping on the Preferences menu f ay POI Alerts Enable POls abe b search by Name Search Nearby PO Menu Options to to set warning chimes and visual warnings for custom POI categories that will activate within a chosen distance radius of your location Options to control the display of POIs on your ICN Options to search for a POI by name Options to search for a POI in a distance radius of your location Only available when UK English AU English or US English language is selected 108 Bnwans CEN 700 Series Reference POI Alerts The POI Alert preferences allow you to set warning chimes and visual warnings for custom POI categories that will activate within a chosen distance radius of your location For example a warning chime will sound or a visual warning will display when an active POI is in the vicinity set by the Warning Distance preferences but not necessarily on your route E Custom POIs must first be installed on your iCN using SmartST Desktop before they can be set as active POIs gt Q gt QOQ gt NAVMAN m SPEEDCAM Select PO Category 1 Tap a custom POI category The activation preferences for the selected POI category will display Display on the map Warm me when am close With an audible alert r With a visual alert Waming dista
64. ies What else can I do y NAVMAN How do navigate to a recent location To make navigating to an address easier your iCN will automatically save all of your start locations and destinations in a list of recent locations gt I 51 Ash 5t Brooklyn New York 11222 gt 271 Crescent Dr I 51 Ash 5t Brooklyn New York 11222 3192 Greenpoint Ave Long lsland City 2963 Starr Ave Star Ave Long sland A 2947 Borden Ave Long lsland City Ne Recent Locations 1 Tap a recent location The Recent Location Preview screen will display 3192 Greenpoint Ave Long Island City New York 11101 Recent Location Preview 2 Complete one of the following If you want to Then calculate the route and open the 3D Map tap Go screen The 3D Map screen will display display the geographical details of the tap Details recent location The Recent Location Details screen will display save the recent location as My Home tap Save The New Favorite screen will display Tap Save as My Home save the recent location as a Favorite tap Save The New Favorite screen will display Tap Save as Favorite display Route Preferences tap Preferences The Route Calculation screen will display 70 A NAVMAN iCN 700 series What else can do press Ka The Recent Locations screen will display How do I use the Map Menu The Map Menu allows you to access navigati
65. if necessary using SmartSI Desktop Preactivated maps of other countries are available for purchase on memory card 111 ee ICN 700 series Reference e NAVMAN How do I use a memory card with my ICN Your iCN has a memory card slot f for an SD or MMC memory card not included that can be used for storing maps or photos Map Storage If there is not enough space in your iCN internal memory for a required map you can install maps to your memory card using SmartST Desktop For information on installing maps see How do install maps on my iCN on page 85 Alternatively preactivated maps are available for purchase separately on memory card To navigate using maps on a memory card ensure the card is in the memory card slot before you set your destination then Drive Away Photo Album Photos can be copied from the Album on your iCN to the My Pictures folder on your memory card The first time a photo is copied to the memory card the following folders will be created E My Documents My Pictures where E is the letter assigned to your memory card drive or reader All photos in My Pictures are part of the same photo album and can be viewed on your iCN For more information on viewing albums and copying photos between albums see Album management on page 61 Once a photo has been copied to the photo album on your memory card you can then use the card with your computer to save e mail or print the photos or
66. ifferent customization options available to enhance your navigation experience The Preferences menu is shown below and is accessed by pressing the button on your iCN then tapping GD Route Options Tutorial System Display About Preferences Element Description Options to control aspects of your route for example indicating a preference for freeways Options to control how the iCN functions for example power and language controls Options to control the screen brightness touchscreen alignment and measurement preferences Legal version and copyright information 97 iCN 700 series Reference NAVMAN Route Preferences You can enhance your navigation experience by modifying aspects of your route and route calculation The first route preference screen is the Route Calculation screen and is accessed by tapping on the Preferences menu Tap to display the other route preference screens Route Calculation gt BD gt Route Type m Fastest time Shortest distance Freference for Freeways P Less often More often Route Calculation Complete the following If you want to change the route type move the Route Type slider towards Fastest time to give more weighting to the fastest time when calculating a route move the Route Type slider towards Shortest distance to give more weighting to the shortest distance when calculating a route change the preference for move the Preference
67. information Displays a list of the nearest gas stations based upon your current location Displays a list of the nearest parking areas based upon your current location Displays the Main Menu screen For more information see What are the main screens that will use on page 20 Displays the Go To menu screen For more information see What are the main screens that will use on page 20 Cycles through the 3D Map 2D Map Next Turn and Turn List screens For more information see What are the main screens that will use on page 20 gt A NAVMAN CEN 700 Series Welcome Side components Q00 im Component Description 2a Connection socket for GPS MCX External Antenna not included socket Connection socket for headphones or earphones not included Slot for memory card The memory card must be inserted with the label facing the front of the iCN For more information on inserting the memory card see How do use a memory card with my iCN on page 112 e Connection socket for AC power pack or in vehicle power adaptor Oe Connection socket for USB cable to your computer O eu control Rotate up or down to hear a sound test and tac cai aa aa the volume Press to mute the tac cai aa aa iCN 700 series Welcome NAVMAN Top components NVWAWN 47 im Component Description ee Turns the iCN on or off when off the iCN enters a suspended state Turns the camera on Press to take a photo
68. ipmeter Global screen will display as a default a Press and hold the Information button The Tripmeter Current Route screen will display Distance 28 6 ft Average Speed 59 mph Max Speed 124 mph Time 38 min Stationary Time 9 min Tripmeter Current Route b Complete one of the following If you want to Then view statistics for your trips to date tap to display the Triometer Global screen reset the tripmeter tap Reset o A Warning dialog box will display Tap Yes to reset The Tripmeter Current Route screen will display 76 JN NAVMAN ICN 700 series What else can I do How do view statistics of my trips to date The Tripmeter Global screen is used to view statistical information for all of your trips to date or since the trip meter was last reset The Tripmeter Current Route screen will only display when there is a current route selected If there is no route selected the Tripmeter Global screen will display as a default Go to step b a From the Tripmeter Current Route screen tap gt i The Tripmeter Global screen will display Distance Average Speed Max Speed Time Stationary Time Reset Tripmieter Global b Complete one of the following If you want to view statistics for your current route reset the tripmeter tap to display the Triometer Current Route screen tap Reset A Warning dialog box will display Tap Yes to
69. lay gt B gt O gt For further information see Screen Display on page 106 GPS Status Signals are transmitted by Global Positioning System GPS satellites orbiting the Earth The GPS Status screen provides a visual representation of the information being received Latitude and longitude are displayed along with ground speed the heading in degrees and a north pointing compass The strength of each satellite is displayed on a bar chart For more information on GPS see How do navigate with GPS on page 22 e a QM O o Satellite Signal Strengths GPS Pi 0 OT A T W 82 km h 45 41 444 4440 404079 0 0 O Heading 31 31 15 47 6 H a P Reset GPS GPS Status The satellites available from your current position are shown as grey red and green coloured bars Resetting your GPS fix On occasion the GPS fix may need to be reset This may occur if the receiver has been transported a large distance since last being used for example to a different country and is still trying to establish the previous position Complete the following reset the GPS tap Reset GPS 102 A NAVMAN iCN 700 series Reference Power e a O Battery Status Tum Off Automatically on battery power 5 min on external power Never Power The Battery Status bar shows the percentage of power left in the iCN battery the word Charging will display when the battery is charging from an exte
70. lete an Avoid Area 1 Locate the Avoid Area that you want to delete 2 Tap and hold the Avoid Area to display the Map menu 3 Select Remove Avoid Area The Avoid Area is deleted How do I delete all Avoid Areas p gt O gt O The Saved Information screen will display 1 Tap Delete Avoid Areas 2 When the warning dialog box opens tap Yes to confirm All Avoid Areas are deleted 73 ICN 700 series What else can I do y NAVMAN How do I preview a route Route demonstration allows you to Preview a route Plan and view a route without a GPS fix such as when you are inside a building The following steps will show you how to preview one route To always preview your route see Demonstration and Logging on page 100 1 Select a departure point If you have a GPS fix you do not need to select a departure point unless you want the demonstrated route to start elsewhere a Tap to display the cross hairs on the Map screen b Position the intersection of the cross hairs over your departure point c Tap and hold the cross hairs to display the Map menu _ ee STE a _ iiiu eet E ee ee Navigate To e Dr E Show Details Location bhyn n 230 NYI9A d Select Location The Location submenu will display e Select Set as Start Location The Map menu will close and the selected point is set as your departure point 74 A NAVMAN iCN 700 series What else can do
71. n see Power on page 103 Battery Status Tum Off Automatically on battery power 5 min on extemal power Never Power How do I charge the internal battery The Battery Status bar displays Charging while the battery is under charge when the battery is fully charged the Battery Status bar will display at 100 To charge the iCN in a vehicle plug the vehicle power adaptor into on the side of the iCN and the other end into the vehicle power socket To charge the iCN using an electrical wall outlet plug the AC power cable into on the side of the iCN and the AC power pack into the wall outlet How do I get started Before you begin check if your vehicle is fitted with a heat reflective or heated windshield If so you will need to purchase an external antenna for your iCN to receive GPS signals For more information see the GPS Frequently Asked Questions guide To get started for the first time complete the following steps Turn your iCN on Select your preferred language Accept the warning message View the Tutorial 1 Turn the iCN on a Position the iCN in your vehicle according to the instructions in the n Car Installation Guide Please ensure that the iCN does not obstruct the driver s view or interfere with the operation of the vehicle airbags and safety devices the GPS receiver is facing the sky directly above it to allow it to obtain a GPS fix through the windsh
72. nce qn 50m 100m 200m 500m 1 0km 2 0km NAVMAN 2 Complete the following If you want to Then display the POI on the map select the Display on the map check box enable a warning chime when the select the With an audible alert check box POI is in close proximity enable a visual warning when the select the With a visual alert check box POI is in close proximity select the distance at which the move the Warning distance slider to select the distance at which the warnings will activate warnings will activate Your preferences are automatically saved Tap to return to the previous screen 109 V NAVMAN ICN 700 series Reference How do I enable Points of Interest Points of Interest POI in a region are grouped into categories You may either choose to display or hide icons of all POI categories on the map screens or to selectively display desired icons chosen from the list of POI categories For example you may be only interested in entertainment venues and want to disable other POI categories such as schools gt Q gt m SE Airline Access E E Airport _ S Amusement Park EA Beach ail A Camping Ground Pima mo lt Points of Interest Complete the following If you want to Then display all POI icons ie icons tap Turn all on from all POI categories display no POI icons tap Turn all off select a specific POI category select the desired POI ca
73. ndows XP Service Pack 1 or higher has been applied before you install SmartST Desktop Close all open programs on your computer Insert the SmartST Application Installer CD into your computer CD drive The SmartST Desktop installer will start If your computer does not automatically launch the CD start the installation manually Start gt Run Type D Install exe where D is the letter assigned to your CD drive then click OK JN NAVMAN English UK Espanol English U5 Italiano Dansk Nederland espaol Frangais Frangais hatian L Deutsch Svenska Select your preferred language for SmartSI Desktop Click Install SmartST Desktop Follow the screen prompts to install SmartSI Desktop Review and accept the Licence Agreement for SmartST Desktop and Microsoft ActiveSync if not already installed on your computer when prompted Select a destination folder for SmartST Desktop when prompted m When the installation has finished click Finish SmartST Desktop will open If prompted to connect your iCN to your computer complete the following Plug the large end of the USB cable directly into a USB port on your computer not a USB hub plug the small end into the USB Socket on the side of your iCN b Where possible plug the USB cable into a USB port at the back of your computer Plug the small end of the AC Power Pack cable into the socket on the side of your iCN plug the ot
74. neeaecath ieee aduneeneeks 76 How do view statistics of my trips to date 2 0 cece ee ceeeee cece ee ee ee ae aaeeeeeeeeeeeeeeeeaeaaaaenneeeeeeees 77 Whatis SmantS T Desktop Tesne sene ena a ss caanednendehec esd dan yas ecduslucuc des siaas as a EEEE 78 Can I use SmartST Desktop with my computer c cccceccecsseceeessseeeceseeeeecseeeeecseeeeessateeeseaes 79 What is Microsoft Activ Synt escrin a e a vent ahead Matthies eects 79 How do l install a map for the first time ae sces ues acieauceea rene cantys detitasiuveuih daebeadiseveneetieecnulund seaukie 79 How do install SmartST Desktop on my computer ccccccccsseeeesssseeecssseeeecsteeeceesaeeeesesateeeesees 80 Smarts DESKIOD TAS Sy serne na E sae cea tusaca Cadet A aE Ea O TAN EEI RENEE 81 AR o0 te IEE AENEAS D AET LEE as EEA E E EEE E EES E TEE E EE 83 How do I keep SmartS Up 1O lt ate tcc eet ee eer eee eae el te atl a ve 84 How do l install maps on my IGN siete ccc cutis iaceteedeeacesthwenttu dl eeesaacireatmadsanteawlanreldecentcctibieewedeectnes 85 How do l install maps from 5 cee cdots ot a0 oleic cn cicetaciebbunmes aves Meceunsthceed otabsuurenueciareec esas EEEE nnt 85 How do know which map contains a particular City OF tOWN cceeeeeeeeeeeeeeeeeeeeeeeaeeeeeteeeeeeees 88 What is a Major Road Network Map cccccecccececeeeeeeeeeeeeee eee ee ee aa eae eeeeeeeeeeeeeaeaaaaaaneeeeeeeeeeeeeaaas 89 How do l install Custom Points Of Interest asc
75. nt 122 SOCCHICAUONS meere Peat e e Beta cae ce Nak e rian Dalit einai tates dai heel aatas 124 Support informations toca rt eater rit ns areata agua date eater accrue a atee niece dated odie nat e a 125 Noto Sirona r a e r a aches suulauuts E dea Wa sdias cnkenaat genet 126 h l Welcome Thank you for purchasing this Navman iCN This user manual has been prepared to guide you through the operation of your Navman iCN from first set up through to continuous use and will help you Drive Away with your ICN straight out of the box Please read this manual carefully before using your iCN for the first time Keep this manual available for future reference In this section EX CONICS ait E E ca tee Naeem tod eaten E E E 10 Typographical conventions ics assed crest ieentoriarnn edad ki talseeawetii vita dewciudad wkenen sean auiilvnliiiunehacvouraariunmuebs 10 CASTING 10 know your IG Nias canteen tats e tia Ratensdaaeat heads Oe canta cite aN Oe sure Maal Ra dats 12 ICN 700 series Welcome Box contents ICN with GPS receiver AC Power pack with power cable and plugs The number of plugs included depends on the country of purchase User Manual GPS Frequently Asked Questions guide Software Product License and Limited Warranty Agreement V NAVMAN 12V In vehicle power adaptor with power cable CDs include SmartST 2005 software including SmartST Desktop Map data User Manual PDF and Adobe Reader
76. ntent or accuracy of the information or the reliability or availability of these websites The use of information regarding safety camera locations may be subject to local laws in the country of use You are responsible for checking that you can use the information in your country or in the country where the information will be used 90 N NAVMAN iCN 700 series How do install Custom Points of Interest How do I create a Custom POI file Complete the following steps to create or edit a custom POI file containing the latitude and longitude of individual POls The file will be saved on your computer in csv Comma Separated Values format When you have finished creating or editing the file you can copy it to your iCN For more information see How do copy a Custom POI file to my iCN on page 92 Map Points of Interest 1 Complete one of the following If you want to create a new POI file Click Hi The POI File Name window will open Type a name for the file in the File Name box then click OK The file name will be used as both the name of the CSV file and the category name The file name cannot include spaces The category name will consist of the first 8 characters open an existing POI file Click EF The Open dialogue box will open Select the POI file from your local or network drive then click Open The POls contained in the POI file are listed 2 Complete the following to add or edit a POI a
77. nts of Interest V NAVMAN How do install Custom Points of Interest T POLE diter 7 0 Uae peda ce Fis Eel we Deve Took SORRAG a Gk Aw Lattia crap te dd a 43 53378 L72 e6827 me JA NAVMAN i 4 077 LAR oo ae Armenian lay Habd b Cition smitt 6 95154 T4645 Alkin Bil AL E7 175 28523 Brdas St EHI 4 BT LARET Cihan Vey Raid S1 4 LAAT Caninia Hasty SH 76 7 12S Lr i455 East Cous eid ee LP4 el Eiis fyrre ery 410 5574 LPs SPs Featherston St L bogs eiee nea Pegue Drie S42 43 0283 Lid SPE Fryer ak Ave 0 wa 7 67 bee F rherhert Awe 791 L74 r iay lil M REET 174 69814 Graal hearth Bed MSIE L743 AD Great Sat Pod A Orero Si You can create custom Points of Interest POIs by using the POI Editor in two ways by creating your own POI files or by using compatible POI files such as safety camera locations downloaded from the Internet Various POI files are available for download for free or by subscription from third party websites Ensure that downloaded POI files are in csv Comma Separated Values format A maximum of 25 custom POI files can be saved on your iCN Each file corresponds to a POI category for example Hotels csv will be listed in your iCN as the Hotels category POI Alerts Custom POI categories can be set to enable a warning sound or visual warning when in close proximity For more information see POI Alerts on page 109 1 Navman is not responsible for the co
78. o remove the selected map when prompted The map is removed from your iCN 87 How do I know which map contains a particular city or town Use the Find City window to find the map that contains a particular city or town 1 Onthe Map menu select Find City The Find City window will open Find City City Name partial match ok Abbeville Louisiana United States of America Abbotsford British Columbia Canada Aberdeen Maryland United States of America Aberdeen South Dakota United States of America Aberdeen Washington United States of America Abilene Texas United States of America Abington Massachusetts United States of America Ada Oklahoma United States of America Addison Illinois United States of America Addison Texas United States of America Adelanto California United States of America Adelphi Maryland United States of America Adrian Michigan United States of America Afihan linnmimi I imikan Catan af Aenmri 2 Type the name of the city or town in the City Name field The list of available cities will reduce to match your search 3 Double click the name of the city or town ri The Globe will rotate to centre on the selected city or town and sc will mark the city or town location 88 What is a Major Road Network map Continuous continental navigation Major Road Network maps allow you to seamlessly navigate between installed maps without installing maps of all regions along your route
79. on the work of the Independent JPEG Group Important safety Information PLEASE READ CAREFULLY BEFORE INSTALLING PRODUCT IN VEHICLE This is the safety alert symbol It is used to alert you to potential personal injury hazards Obey all safety messages that follow this symbol to avoid possible injury or death WARNING indicates a potentially hazardous situation which if not avoided WARNING could result in death or serious injury CAUTION indicates a potentially hazardous situation which if not avoided may A CAUTION result in minor or moderate injury CAUTION used without the safety alert symbol indicates a potentially hazardous CA UTION situation which if not avoided may result in property damage Removing original equipment adding accessories or modifying your vehicle could affect the vehicle s safety or make it illegal to operate in some jurisdictions Follow all product instructions and all instructions in your vehicle owner s manual regarding accessories or modifications Consult your country s and or state s laws regarding operation of a vehicle with any accessories or modifications It is your sole responsibility to place secure and use the iCN in a manner that will not cause accidents personal injury or property damage Always observe safe driving practices Mount the iCN in a position that is secure and does not obstruct the driver s view Do not mount the iCN in a way that may interfere with t
80. onal functions from the 3D Map and 2D Map screen Show Details Location N L Add Avoid Area 230 NYISA Displaying the Map Menu 1 Tap S to display the 3D Map or 2D Map screen 2 Tap and drag to move around the map to your selected location 3 Either tap and hold the cross hairs to select that location or tap and hold elsewhere on the map The Map Menu will display Map Menu options The following options are available via the Map Menu Menu Option Description Navigate To Calculates a route from your current location once your current location is determined Show Details Only available when the selected location is near a road Displays the Location Details screen from which you can View details of the location Add the location to your multi stop trip Save the location as a favorite Access and edit your route preferences Navigate to the location 71 ICN 700 series What else can I do h NAVMAN Only available when the selected location is near a road Add Avoid Area Adds an Avoid Area for you to size Delete Avoid Area Deletes the selected Avoid Area Displays the Location sub menu from which you can Add To Favorites Displays the New Favorite screen for you to add the location as a favorite For further information see How do save a Favorite on page 51 Nearest POI Displays the Select POI screen Select the POI category then the POI to navigate to For further information see How do s
81. orite screen will display Tap Save as Favorite The Favorite will save and the Multi Stop Trip Planner screen will display 35 How do I skip a waypoint during a multi stop trip You can modify a multi stop trip at any time from the Multi stop Trip Planner screen however if you have already commenced a trip changes will not affect the current route gt My Current Location 25 0ak Rd 51 Dabbs Hill Lane Wade Ave John s Cross Rd Add Clear Save Go lt Multi stop Trip Planner i To skip a waypoint during a multi stop trip complete the following 1 Tap the map to display the cross hairs The Map Menu will display 2 Tap Route then Skip Waypoint The next waypoint will be skipped and the route recalculated to the following waypoint 36 How do I search for a landmark or venue Setting a Point of Interest POI as your destination A POI is a named site feature landmark or public venue which can be displayed as an icon on the map POIs are grouped by type such as gas stations parks and museums How do find the nearest gas Station You can press a to quickly find the nearest gas station As POls are grouped by category including gas stations your iCN will display a list of the nearest gas stations based upon your current location a Press a The Select POI screen will display showing a list of the nearest gas stations based upon your current location
82. our iCN is equipped with maps that provide street level detail for door to door navigation including Points of Interest POIs such as accommodation parking areas gas stations railway stations and airports When you Then know the address of your destination use the address entry wizard to enter the address see How do search for an address on page 24 have multiple stops use the Multi stop Trip Planner screen to enter multiple waypoints see How do create a trip with multiple stops on page 30 need to find a named site feature landmark search for a Point of Interest see How do search for a or public venue landmark or venue on page 37 need to find a gas station select from a list of the nearest gas stations see How do find the nearest gas station on page 37 need to find a parking area select from a list of the nearest parking areas to your current location see How do find the nearest parking area on page 37 WARNING For your safety enter destination information before you start a journey Do not enter a destination while driving In this section How do Search for an address 0 0 cece cececccceecececcececcecucaececeaucuenecueaeauceaeaucuenecueaeaecueaecueaeseceeseseeaeeesetes 24 How do create a trip with multiple StOPS cece cece eee e erence eee e ae aaaaaa ee eeeeeeeeseaaaaaaaaaaeeeeeeeeeeeeeaaas 30 How do search for a landmark or venue cece cceecececceceececece
83. ove installed maps from your iCN memory card or memory card via a memory card reader Check for updates Click to check online for software updates or download software Update available updates 5 Globe A map of the world indicating the maps on the current CD on a CD that came with the current CD installed on your iCN or memory card or available from Navman Map Information The following information will display when you point to a map Map name File size if the map is on the inserted CD or a CD in the same set Map status Latitude Longitude co ordinates in degrees minutes and seconds Local time offset UTC lt lt ooo o odas and UTE ofset oik To display the Latitude and Longitude co ordinates and UTC offset click o Map Colour Key A key for defining the different colours of the maps 82 Toolbars The following toolbars are available in SmartST Desktop Description Status T Indicates that your iCN is connected to your computer via ActiveSync p Indicates that your iCN is not connected to your computer Globe Q Click to zoom in to the globe Click to zoom out of the globe Controls whether the globe automatically rotates to the correct maps when a map CD is inserted in your CD drive Controls whether the globe is transparent Controls whether the day night line is displayed on the globe Controls whether the maps are displayed on a globe or Mercator Projection Cursor Controls whether
84. ow do I copy photos between Albums Photos can be copied from the A bum on the iCN s hard drive to your memory card and vice versa The first time a photo is copied to your memory card a folder will be created on the memory card called My Pictures For more information see How do use a memory card with my iCN on page 112 1 From the Album screen select the Album you want to view 2 Tap and hold then drag across the screen to select the photo s you want to copy As a photo is selected a red border will appear around it 3 To cancel a selection tap and drag over the photo s again 4 When you have finished the selection tap Copy 5 A warning screen will display asking you to confirm or cancel the procedure If confirmed the photo s will be copied to the other A bum You can also copy a single photo from the Photo Details screen For more information see Photo management on page 63 How do I view the Album on my Memory Card The icon displayed at the top left hand corner of the Album screen indicates which Album you are currently viewing To change Albums tap the icon to reveal both options hard drive amp memory card then select the required Album For information on using a memory card with your iCN see How do use a memory card with my iCN on page 112 How do I delete photos from an album Photos can be deleted from the A bum on the iCN s hard drive or your memory card When a photo has been s
85. play preferences are set to North To view the 2D Map screen press to cycle through the screens Tap and drag the screen to move across the map Tap and hold the map to view Map menu For more information see How do I use the Map Menu on page 71 30 sothst tig 60200 Ce n Direction of next turn The direction of your next turn To repeat the voice prompt of your next turn tap the turn arrow Distance to next turn The distance to your next turn Next instruction The direction and name of the street to turn in to When you cycle through the Information options a function description will display briefly at the top of the screen o Current position Your current position is marked with Status bar Displays one of the following The name of the street you are located on Speed warnings Active POIs 46 2 NAVMAN iCN 700 series How do view my route a e Information Displays one of the following options Time km h or mph Speed TTG Time to Go DTG Distance to Go ETA Estimated Time of Arrival Tap to cycle through the options During a Multi trip journey Time to Go Distance to Go and ETA will appear as Time to Waypoint Distance to Waypoint and ETA at eee ppe Your current route is highlighted Next turn arrow Your next turn is highlighted in a different colour to future turns The default colour of your next turn is green but will depend on th
86. r your trip Your route will be calculated to go via each of these points in the specified order Waypoints can be added via the Multi stop Trip Planner screen or by selecting Location from the pop up Map menu on the 2D Map or 3D Map screen then Add to Trip You can save up to 200 multi stop trips each with up to 15 waypoints E Waypoints added updated or deleted after a multi stop trip has commenced will not affect the current route Quick Steps 1 Start your Multi stop Trip Select the country and state Search for the city area 2 3 4 Search for the street 5 Search for the house number 6 Tap Go 30 2 NAVMAN iCN 700 series How do go from A to B aa Case Study Z How do navigate to multiple addresses This case study will show you how to set a multi stop trip by selecting your country then state then town or city then street then house number for each waypoint 1 Start your multi stop trip gt Q My Current Location seeary Psae kal lt Multi stop Top Planner The Multi stop Trip Planner screen will display a Tap Add The Aad to Trip Menu will display ee F My Home Address or FOI Favorites md aa ij Recent Nearest POl Add to Trp Menu b Tap Address or POI The Destination Search screen will open E You can also add waypoints using Favorites recent destinations and nearest Points of Interest 31 iCN 700 series How do go from A to B y NAVM
87. reset The Tripmeter Global screen will display 77 i iCN 700 series What is SmartST Desktop y NAVMAN What is SmartST Desktop SmartST Desktop is software for your PC computer and is used to install maps to your iCN You can also use it to remove maps from your iCN obtain software updates manage Custom Points of Interest POls and install Basemaps In this section How do install SmartST Desktop on My computer c ce ccecccecesseececseeeeeecsteeeeseaeeeeseaeeeesesaeesessaeees 80 SmansT Bet cae olpi a1 UI 2xc meter eee nee arte te UA Snel ee NT ee Are ee EEA en 81 How do keep Smarts upto dat ie ssisenne an onsa ESSE pae EES EA AA CAS EO pE ENET 84 How do l install maps on my ICN haces ss he ce a cia het ee ene ee aaa aces hd ane acute EEEE 85 How de lpoackup My ICN ers ccecaet ele toatcand Olucee teeth abies bei tad ee Gla Ae catia eh catenins Ai suce thet etude 95 78 2 NAVMAN ICN 700 series What is SmartST Desktop Can use SmartS Desktop with my computer Ensure you have the following minimum system requirements before installing SmartSI Desktop IBM compatible PC Microsoft Windows 2000 or XP SP1 NT not supported Internet Explorer 6 or higher CD drive USB port Internet connection for registration You must install SmartST Desktop from the Application Installer CD onto your computer hard drive you cannot run SmartST Desktop from the CD What is Microsoft ActiveSync
88. rnal power source To charge the battery see Internal battery on page 16 Complete the following If you want to change the time to elapse before tap the on battery power box and select a time to elapse before turning off when using battery turning off power select Never for the iCN to not turn off automatically unless battery power is very low change the time to elapse before tap the on external power box and select a time to elapse before turning off when using external turning off power select Never for the iCN to never turn off automatically Your preferences are automatically saved Tap to return to the previous screen Language e Language English US Voice Guidance Enable voice guidance lt Language 103 t NAVMAN ICN 700 series Reference Complete the following If you want to change the on screen language select your preferred language from the Language box and tap OK Your language preference is saved and the map screen is displayed enable voice guidance instructions select the Enable voice guidance checkbox while driving to your destination change the voice scheme select your preferred voice scheme from the Voice Guidance box Only voice schemes that are compatible with the chosen language are displayed Your preferences are automatically saved Tap to return to the previous screen Saved Information S gt D gt 0 gt 0 Delet
89. s Active POIs Information Displays one of the following options Time km h or mph Speed TTG Time to Go DTG Distance to Go ETA Estimated Time of Arrival Tap to cycle through the options E During a Multi trip journey Time to Go Distance to Go and ETA will appear as Time to Waypoint Distance to Waypoint and ETA at O WaPo OO OOOO O OO o Cancel Route Cancels your current route 48 2 NAVMAN iCN 700 series How do view my route i Your current position is marked with if visible Compass and GPS Displays one of the following options Information Green Quadrants A valid GPS signal is being used to fix your position displays between one and four quadrants to indicate the strength of the signal Red Circle No signal Compass heading Tap to cycle through the options tap and hold to display the GPS Status screen Direction List screen The Direction List screen displays the next four turns of your route the turn direction the street name and the distance to the turn You can view all the turns in the list using the scroll bar A route must first have been calculated for this screen to be available To view the Direction List screen when a route has been calculated press S to cycle through the screens B Left Manhattan Ave Left Greenpoint Ave ee 0080 Straight O ui Greenpoint Ave Straight Greenpoint Ave O i 1 154 Manhattan Ave The direction of the turn Your next turn is
90. seneedoi casera eee 61 How do save e mail or print OINOTOS 7 sca tts sanenntcinn cea aee eden dadacinnn naa bn teanannke ae eden aeamnmeretieuaeia 65 How do I navigate to a photo location sides cassis ercaswesveceneWlateadedsswariexs nsdn sweadoanexUeestadsiadveensw tadiarededeteretiee 67 How do assign a photo to a FAVOLIlS iicscsniwexncnndcaceantsenvnernecnawsnanesvanntbansanetacekantnaumnanabaexnentnendaaees 68 57 How do I view the Camera screen The Camera screen allows you to take photos and access the camera preferences To view the Camera screen press on top of the iCN You can also access the Camera screen from the Main Menu tap E Pressing will not take a photo until you are already in the Camera screen 89 C a peee Displays the Album screen Returns you to the screen you last viewed viewsinder Allows you to frame the image within the Viewfinder O uro Displays the current lighting setting Tap to view lighting options Displays the brightness setting Tap to view brightness options Indicates if GPS information is available E When the Camera screen is displayed all buttons on the iCN except become inactive This ensures you remain in the Camera screen even if other buttons are pressed accidentally 58 A NAVMAN iCN 700 series How do I use the camera How do I take a photo The Camera screen must be displayed before you can take a photo 1 To view the Camera screen
91. ses ceicssess oretcareee we eeewetneee earl eee ee eee 90 How do I create a Gusto nw OUTIL 2 fehl tas Ook Oe BN Ne A RE 2 GN hie A tlds 91 How do copy a Custom POI file to My ION 00 eect e tree eee ee ee ae eae ee ee eeeeeeeeeeaaaaneeeeeeeees 92 FIOW dos ack my IONS is cheat hint e a a Ora E nade un cdl i Dest lela 95 PRET OMOIG Cisse tec costs cette a neue alacant ue tenet E E acea lh dee tiard 96 Whatcan CUSTOM ZO teier E E E il wn a E E O E uit vent E ERRER 97 Route PreferenN OSes eenia ienee eea Eep iere EO Eae aa apoa aea Ee EEan EEEa a TESES 98 BB Cif ds aa E AN E E E 101 System PreferenNCeS eenia eonda a e e e a E a 101 Display Preterentes prei esii ee eaa e E a tact os ca ae E 105 POL Preferente Sesiinae R E O E ES 108 Which maps are already installed on my iON ccceceeeeeee cece ee ee ee eeeeeeeeeeeeeeeeaeaaeaeaneeeeeeeeeeeeeeees 111 How do use a memory Card with My ICN 0 0 c eee ee cette eee e tees sees ae aa ae eeeeeeeeeeeeeeaeaaeaaaaeeneeeees 112 How do l insert a Memory Card isccusscsctcceccttet saad teutdatt fe ser relaeth lect boo kucain dilate cataract delonds oe 113 How do remove a Memory Card te cecs ie ceetcuves ie ave vernesesnte sd meee eeeinaee oe die ec cunteeec eves 113 Street types US na seas aaadatseck a vate ra dees conaahh Lannie estan e a a a a 114 Streettyp s Ganada ocene a a e a A E e aa e E a e Aa 118 Points of Interest CalSqOneS Ain ttt cease es tia aioe eae eal ene tat etal Ol eEe
92. t first transfer the photos to your computer there are two ways to do this Copy the photos from a memory card to your computer via a memory card reader or memory card drive or Copy the photos directly from your iCN to your computer via the enclosed USB cable Via Memory Card Photos can be copied from the Album on your iCN to the My Pictures folder on your memory card The first time a photo is copied to the memory card the following folders will be created E My Documents My Pictures where E is the letter assigned to your memory card drive or reader All photos in My Pictures are part of the same photo album and can be viewed on your iCN For more information on viewing albums and copying photos between albums see Album management on page 61 Once a photo has been copied to the photo album on your memory card you can then use the card with your computer to save e mail or print the photos or take the memory card to a digital photo retailer for printing Via USB cable Before you can copy photos from your iCN to your computer you must first ensure that you have Microsoft ActiveSync installed What is Microsoft ActiveSyncs Microsoft ActiveSync is used to establish a connection between your iCN and your computer After it is installed ActiveSync will run in the Windows System Tray Notification Area when you start Windows ActiveSync will activate when your iCN is connected to your computer For more information on
93. t the Tutorial from displaying again on startup tap the Show on start up check box to clear it To move forward through the Tutorial screens tap gt To revisit the previous screen tap Ka You can view the Tutorial again while using your iCN For more information see Tutorial on page 101 When you have finished the Tutorial the 3D Map screen will display If you have a GPS fix your current location will be displayed on the map For information on GPS see How do navigate with GPS on page 22 How do I turn my ICN off To turn your iCN off press Your iCN will enter a suspended state and the screen will turn off When you turn your iCN on again it will return to the screen you were last viewing Power saving suspended state To save power your iCN will automatically enter a suspended state after a pre determined period of time You can change the default suspended state setting at the Power preference screen For more information see Power on page 103 If battery power is very low your iCN will enter a Suspended state whether you have set a pre determined period of time or not k If you are not going to be using your iCN for an extended period of time switch the BATTERY switch to OFF to save battery power How do I reset my iCN Normally you do not need to reset your iCN however should your iCN not turn on or not respond you can reset it to solve the problem To reset your iCN press the white RESET
94. take the memory card to a digital photo retailer for printing 112 Y NAVMAN ICN 700 series Reference How do insert a Memory Card Holding the card by the edges gently insert it into the slot with the label facing the front of the iCN CAUTION Do not to apply pressure to the center of the memory card How do remove a Memory Card Before removing the memory card turn off the iCN Next gently push the top edge of the card to release it and pull it out of the slot 113 ICN 700 series Reference Street types US Country United States of America Street Type ALLEY ANNEX ARCADE AVENUE BAYOU BEACH BEND BLUFF BLUFFS BOTTOM BOULEVARD BRANCH BRIDGE BROOK BROOKS BURG BURGS BY PASS CAMP CANYON CAPE CAUSEWAY CENTER CENTERS CIRCLE CIRCLES CLIFF CLIFFS CLUB COMMON CORNER CORNERS COURSE COURT COURTS COVE COVES CREEK CRESCENT CREST CROSSING CROSSROAD CURVE 114 h NAVMAN Abbreviation ALLEY ANNEX ARC AVE BYU BCH BND BLF BLFS BTM BLVD BR BRG BRK BRKS BG BGS BYP CP CYN CPE CSWY CTR CTRS CIR CIRS CLF CLFS CLB COMMON COR CORS CRSE CT CTS CV CVS CRK CRES CRST XING XRD CURV re e NAVMAN ICN 700 series Reference Country Street Type Abbreviation United States of America DALE DL DAM DIVIDE DRIVE DRIVES ESTATE ESTATES EXPRESSWAY EXTENSION EXTENSIONS FALLS FERRY FIELD FIELDS FLATS FORD FORDS FOREST FORGE FORGES
95. tegory checkbox icon for display on the map repeat until all desired POI categories are selected screens Your preferences are automatically saved Tap to return to the previous screen 110 en NAVMAN ICN 700 series Reference Which maps are already installed on my ICN Region of Description Purchase Australia or ICN 750 Preactivated maps of Australia or New Zealand are New Zealand preinstalled on your iCN You can reinstall your maps from the enclosed CD if necessary using SmartSI Desktop Preactivated maps of other countries are available for purchase on memory card Canada and ICN 750 Preactivated maps of Canada and the United States United States are preinstalled on your iCN You can reinstall your maps from the enclosed CDs if necessary using SmartSI Desktop Preactivated maps of other countries or states are available for purchase on memory card Western Europe including iCN 720 Preactivated maps of one or more countries are the United Kingdom preinstalled on your iCN Maps of Western Europe are on the enclosed CDs You can reinstall your preactivated maps from the enclosed CDs if necessary using SmartST Desktop however to install a non activated map you must first purchase a Map Product Key Alternatively preactivated maps are available for purchase on memory card ICN 750 Preactivated maps of Western Europe are preinstalled on your iCN You can reinstall your maps from the enclosed CDs
96. the Latitude Longitude co ordinates and UTC offset are displayed in the pointer text Moving a toolbar A toolbar is either docked in the gray area at the top of the screen or floating on the screen To float a toolbar click the portion of the toolbar to the left of the buttons and drag it to anywhere on the screen To dock a toolbar either double click the top of a floating toolbar or click and drag the toolbar back to the gray area at the top of the screen To position a floating toolbar over a docked toolbar press and hold CTRL while you drag the toolbar to the required position Reshaping a toolbar Click and drag the edge of a floating toolbar to reshape it You cannot reshape a toolbar that is docked at the top of the screen 83 How do I keep SmartSI up to date We recommend that you regularly use SmartST Desktop to check the Navman server for SmartST software updates bi Updating vs Upgrading Updating software is different from upgrading software When you update SmartST the latest service packs and bug fixes are downloaded from Navman and applied to your iCN To upgrade SmartSI you must first purchase a new version of SmartST from a retailer then install it on your iCN How do update SmartSI 1 Ifyou connect to the Internet via a dial up connection connect to the Internet now 2 Open SmartSI Desktop follow the prompts then click Check for updates Your computer will connect to the N
97. the remote control You can navigate to My Home by pressing on the remote control may be sold separately 1 Press to display the My Home Preview screen 2 Press again to calculate the route and display the 3D Map screen 53 iCN 700 series How do save Favorites and My Home NAVMAN How do I view details of a Favorite gt 1 From the My Favorites screen select a Favorite The Favorite Preview screen will display i Details aiia Details A q l Pin Delete Prefs Go Favonte Preview 2 Tap Details The Favorite Details screen will display 1001 Croes Ave Bronx Mew York 10472 USA 40 49 35 2 N 7S 57 12 0 W Favonte Details 3 Complete one of the following Then tap Save The Edit Favorite screen will display tap Prefs The route Preference screen will display tap Go The route is calculated and displayed on the Map screen 54 2 NAVMAN ICN 700 series How do save Favorites and My Home How dol edit the name ofa Favorite gt O 1 From the My Favorites screen select a Favorite to edit The Favorite Preview screen will display a Prey _ EHP a ere Rosedale Ave fl ls SSS Croes Ave 7 ag w As ma Pa Weeen iaa e SEE h Sourncly iene Awe won js gt on et ah Favonte Preview 2 Tap Edit The Edit Name screen will display 1001 Croes Ave 1001 Croes Ave Bronx dew York 10
98. the supervision of a Navman technician only to be used if required by Navman Customer Support Your preferences are automatically saved Tap to return to the previous screen 100 2 NAVMAN iCN 700 series Reference Tutorial The Tutorial displays when you turn your iCN on unless you have cleared the Show on start up check box You can view the Tutorial at any other time gt B gt To prevent the Tutorial from displaying again on startup tap the Show on start up check box to clear it To move forward through the Tutorial screens tap gt To revisit the previous screen tap Ka When you have finished the Tutorial the Preferences menu will display System Preferences You can enhance your navigation experience by modifying aspects of the way that your iCN functions The System Preferences menu is shown below and is accessed by tapping on the Preferences menu Power J oO Language Saved Info Startup System Preferences Options to control the screen brightness and touch screen alignment An option to reset the GPS signal Options to control the way that power to the unit is used for example the time to elapse before the unit is automatically turned off Options to control the language used on your iCN and voice guidance Options to delete saved information Options to control what is displayed when your iCN is turned on 101 iCN 700 series Reference NAVMAN Screen Disp

Download Pdf Manuals

Related Search

Related Contents

Smeg SE640/1 Instructions for Use  Sony SCD-XA9000ES User's Manual  KALEI LISCIO 2  USB Display **DSP860** Installation Manual  Guida dell`utente per il cellulare 550SH  Tel Line Tester User Manual  Chevrolet 2014 Silverado 1500 Get To Know Manual  

Copyright © All rights reserved. Failed to retrieve file