Murphy Crusader PowerView Initial Twin Engine User's Manual
Contents
1. 00 02 0620 MURPHY Secon A Crusader PowerView Instruction Sheet INITIAL TWIN ENGINE SET UP 1 After installation start your engines Both PowerView ADJUST BACKLIGHT units will be reading the Master engine Choose to leave ADJUST CONTRAST one engine running and kill the other UTILITIES 2 While the one engine is running press MENU on the PowerView keypad Scroll down to the bottom of the second page until UTILITIES is highlighted Press Enter GAGE DATA REMOVE ALL GAGES SOFTWARE VERSION MODBUS SETUP FAULT CONVERSION RESET AVERAGE FUEL RESET TRIP FUEL RESET TRIP FUEL SELECT ENGINE ECU 3 Within the UTILITIES menu you will find a list of options 4 Scroll to the bottom of the second page until SELECT ENGINE ECU is highlighted Press ENTER 5 This screen will default to listen to the Master engine 0 To change this to listen to the Slave engine 1 press the right arrow key 1 will appear on the screen Press ENTER NOTE Make sure to press ENTER after selecting ECU OSTEN TO EGH 1 1 in order to activate your selection 6 Press MENU to go back to the main data screens You should now have data available for the engine If you do not then the engine you are working with is the Master and should be set to 0 and the other engine is the Slave and should be set to 1 Repeat this process to change the other PowerView unit In order to consistently bring you the highest quality full featured produ2. cts we reserve the right to change our specifications and designs at any time MURPHY the Murphy logo and PowerView are registered and or common law trademarks of Murphy Industries Inc This document including textual matter and illustrations is copyright protected by Murphy Industries Inc with all rights reserved c 2006 Murphy Industries Inc RESETTING FUEL OPTIONS 1 Press MENU and scroll down to the bottom of the second page until UTILITIES is highlighted Press ENTER 2 Here you will find multiple fuel parameters that can be reset at the discretion of the user 3 Scroll to highlight RESET TRIP FUEL and press ENTER The parameter will reset 4 Press MENU to return to the data screens 5 When the fuel parameters are reset the screen will display a message to indicate that PowerView Keypad Buttons ADJUST BACKLIGHT ADJUST CONTRAST UTILITIES GAGE DATA REMOVE ALL GAGES SOFTWARE VERSION MODBUS SETUP FAULT CONVERSION RESET AVERAGE FUEL RESET TRIP FUEL RESET TRIP FUEL TRIP FUEL RESET MURPHY gt www fwmurphy com 918 317 4100 sales fwmurphy com
Download Pdf Manuals
Related Search