Milwaukee Instruments SONAR SMS510 User's Manual
Contents
1. SPECIFICATIONS WW Milwaukee SMS510 RANGE 1000 mV RESOLUTION 1 mV ACCURACY 25 C 5 mV SETPOINT 0 to 600 mV ALARM active when the measure is lower than setpoint active when the measure is lower than setpoint MA921B 2 included OUTPUT POWER SOCKET ORP ELECTRODE ENVIRONMENT 0 to 50 C 95 RH max POWER SUPPLY 12 VDC included POWER DRIVERS 115VAC 2A 60Hz or 230VAC 1A 50Hz DIMENSIONS 160 x 80 x 40 mm WEIGHT 220 g meter only OPTIONAL ACCESSORIES MA921B 2 ORP Electrode with BNC connector and 2m cable M10000B Electrode rinse solution 20 mL sachet 25 pcs MA9015 Electrode storage solution 220 mL bottle MA950 Portable meter wall fixing kit WARRANTY This instrument is warranted from all defects in materials and manufacturing for a period of two years from the date of purchase The electrode is warranted for a period of 6 months If during this period the repair or replacement of parts is required where the damage is not due to negligence or erroneous operation by the user please return the parts to either dealer or our office and the repair will be effected free of charge Note We reserve the right to modify the design construction and appearance of our products without advance notice lot OLS MY Milwaukee USER MANUAL PORTABLE ORP METER MODEL SMS510 Smart Monitoring System Le AN AWW Milwaukee SMS510 ORP meter ON OFF 300 ALARM 150 42. WARNING when the alarm led is blinking the mains voltage is present in the output power socket METER OUTPUT POWER SOCKET The meter works as anormally open switch When alarm is active MEAS lt SETPOINT the switch is closed and the power socket active ORP ELECTRODE
3. 50 WZ gt A oreset 0 600 EAZA OPERATION SETPOINT e Connect the supplied 12 VDC o 0 e The setpoint can be selected power adapter to the meter a by adjusting the central front STOF and to the mains a knob to the desired value 300 e Connect the ORP electrode e The selectable range for 1 sae to the BNC socket on the j J SMS510 is from 0 to 600 mV eg bottom of the meter mv e Always remove the electrode Ss Smart Monitoring System protective cap before taking NS any measurement If the elec at A trode has been left dry soak AY the tip bottom 2 5 cm in Snart Monitering INSTALLATION PROCEDURE rinse solution M10000B for BN a few minutes to reactivate it x e Turn the instrument on by pressing the ON OFF key QH Output POWER TT 12vDo Allow the reading to stabilize i at and the meter will start con ELECTRODE tinuous monitoring ee erent nee e The meter is factory calibrated o ocker e A blinking alarm will indicate when the measured ORP value is lower than the setpoint a 115 230 VAC id FROM MAINS POWER ADAPTER i EF LINE 12 VDC LP NOTE e The power contact is not protected by fuse inside the meter It is recommended to protect it outside against failure e
Download Pdf Manuals
Related Search